Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : During the 2003 summer monsoon, the Hi-CLIMB seismological stations deployed across the Himalayan Range detected bursts of high-frequency seismic noise that lasted several hours to days. On the basis of the cross correlation of seismic envelopes recorded at 11 stations, we show that the largest transient event on 15 August was located nearby a village partially destroyed on that day by a devastating debris flow. This consistency in both space and time suggests that high-frequency seismic noise analysis can be used to monitor debris flow generation as well as the evacuation of the sediment. A systematic study of one year of seismic noise, focusing on the detection of similar events, provides information on the spatial and temporal occurrence of mass movements at the front of the Himalayas. With a 50% probability of occurrence of a daily event, a total of 46 debris flows are seismically detected. Most of them were generated in regions of steep slopes, large gullies, and loose soils during the 2003 summer monsoon storms. These events are compared to local meteorological data to determine rainfall thresholds for slope failures, including the cumulative rainfall needed to bring the soil moisture content to failure capacity. The inferred thresholds are consistent with previous estimates deduced from soil studies as well as sediment supply investigations in the area. These results point out the potential of using seismic noise as a dedicated tool for monitoring the spatiotemporal occurrence of landslides and debris flows on a regional scale.
ISSN: 0148-0227

hal-00464177
https://hal.archives-ouvertes.fr/hal-00464177
DOI : 10.1029/2008JF001198

Éditeur(s) : HAL CCSD Himalayan Association Advance Science
Résumé : The Himalayas and the Tibetan Plateau are considered as the classical case of continental collision.
ISSN: 1727-5210

hal-00854401
https://hal.archives-ouvertes.fr/hal-00854401
DOI : 10.3126/hjs.v5i7.1267

Éditeur(s) : HAL CCSD Elsevier
Résumé : Handheld energy dispersive portable X-ray spectrometers (pXRF) are generally designed and used for qualitative survey applications. We developed shipboard quantitative analysis protocols for pXRF and employed the instrument to make over 2000 individual abundance measurements for a selection of major and trace elements on over 1200 m of recovered core during the eight weeks of the International Ocean Discovery Program (IODP) Expedition 352 to the Izu-Bonin forearc. pXRF analytical performance, accuracy and precision were found to be the same on powdered rock samples and on freshly cut rock surfaces, and sample results were similar within error to measurements made via shipboard ICP-OES analysis save at low abundance levels for a few elements. Instrument performance was optimal for elements between Z = 19 and Z = 40, and the system yielded reproducible data for K, Ca, Ti, V, Cr, Mn, Fe, Cu, Zn, Rb, Sr, and Zr on both powdered samples and rock surfaces. Working curves developed via pXRF measurement of a suite of geologic standard reference materials and well-characterized lavas permitted accurate quantitative measurements for many of the examined elements on both sample powders and rock surfaces. Although pXRF has been sporadically employed on previous cruises, Expedition 352 is the first time a detailed, high-density chemostratigraphy of recovered core samples was collected using pXRF measurements of rock core surfaces. These high-resolution data allowed the recognition of chemically distinct eruptive units in near real-time. The rapid identification of geochemical trends vastly improved our selection of samples for shipboard and shore-based analysis, permitted a more comprehensive interpretation of our Expedition results, and provided key decision-making information for drilling operations.
ISSN: 0009-2541

hal-01553188
https://hal.archives-ouvertes.fr/hal-01553188
DOI : 10.1016/j.chemgeo.2017.01.007

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Analysis of continuous seismic data recorded by a dense passive seismological network (Hi-CLIMB) installed across the Himalayas reveals strong spatial and temporal variations in the ambient seismic energy produced at high frequencies (>1 Hz). From June to September 2003, the high-frequency seismic noise is observed to increase up to 20 dB (relative to (m/s)(2)/Hz) for all the stations located along a steep 30-km-long narrow and deeply incised channel of the Trisuli River, a major trans-Himalayan river. The early summer increase in high-frequency energy is modulated by a 24-h periodicity where the minimum of seismic noise level is reached around noon and the maximum is reached late in the evening. A detailed study of seismic noise amplitude reveals a clear correlation with both regional meteorological and hydrological data along the Trisuli River. Seasonal increase in ambient noise coincides with the strong monsoon rainfall and a period of rapid melting of snow and ice in the high elevations. The observed 24-h cyclicity is consistent with the daily fluctuation of the precipitation and river discharge in the region. River-induced seismic noise is partly generated by stream turbulence, but this mechanism fails to explain the observed clockwise hysteresis of seismic noise amplitude versus water level. This pattern is better explained if a significant part of the observed seismic noise is caused by ground vibrations generated by bed load transport. This points out the potential of using background seismic noise to quantify in continuous river bed load and monitor its spatial variations, which remain difficult with classical approaches.
ISSN: 2169-9313

hal-00412170
https://hal.archives-ouvertes.fr/hal-00412170
DOI : 10.1029/2007JB005034