Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : Based on a High-Resolution 3D seismic block acquired in the Gulf of Lion in 2004–2005 we investigated fluid pipes and pockmarks on the top of the interfluve between the Hérault canyon and the Bourcart canyon both created by turbidity currents and gravity flows from the shelf to the deep basin in the north-western Mediterranean Sea. Combining the geometry of the potential fluid pipes with the induced deformation of surrounding sediments leads then to the ability to differentiate between potential fluid sources (root vs source) and to better estimate the triggering mechanisms (allochtonous vs. autochtonous cause). We linked together a set of derived attributes, such as Chaos and RMS amplitude, to a 3D description of pipes along which fluids may migrate. As previously shown in other basins, the induced deformation, creating cone in cone or V-shaped structures, may develop in response to the fluid pipe propagation in unconsolidated sediments in the near surface. The level at the top of a cone structure is diachronous. It means that stratigraphic levels over this surface are deformed at the end of the migration. They collapse forming a depression called a pockmark. These pipes are the result of repeated cycles of fluid expulsion that might be correlated with rapid sea-level rise instead of sediment loading. The most recent event (MIS 2.2 stage) has led to the formation of a pockmark on the modern seafloor. It has been used as a reference for calculating the effect of a rapid sea-level rise on fluid expulsion. As all physical and geometrical parameters are constrained, we were able to define that a + 34 m of sea level rise may account for triggering fluid expulsion from a very shallow silty-sandy layer at 9 m below seafloor since the last glacial stage. This value is consistent with a sea level rise of about 102 m during this period. This study shows that the episodic nature of fluid release resulted from hydromechanical processes during sea-level rise due to the interactivity between high pressure regimes and principal in situ stresses.
ISSN: 0037-9409

hal-01667241
https://hal.archives-ouvertes.fr/hal-01667241
DOI : 10.1051/bsgf/2017190

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The island of Taiwan is located on the convergent boundary between the Philippine Sea plate and the Chinese continental margin. It offers very active mountain building and collapsing processes well illustrated by the rugged topography, rapid uplift and denudation, young tectonic landforms, active faulting and numerous earthquakes. In this paper, using simple models, we have estimated vertical movements and associated absolute gravity variations which can be expected along a profile crossing the southern part of the island and probably suffering the highest rates of rising. The two different tectonic styles proposed for the island, thin-skinned and thick-skinned, were taken into account. Horizontal and vertical movements were modeled by an elastic deformation code. Gravity variations due to these deformations are then modeled at a second step. They are dominated by plate and free-air effects, i.e. elevation of the topography, with several mu Gal yr(-1). By comparison, gravity changes generated by mass transfers are weak: maximum 0.1 mu Gal yr(-1) with the thin-skinned tectonic and 0.3 mu Gal yr(-1) with the thick-skinned tectonic. Though elastic rheology has limitations, this modeling offers interesting results on what gravity signal can be expected from the AGTO project (Absolute Gravity in the Taiwanese Orogen), which proposes to study the dynamic of these mountain ranges using absolute gravimetry (AG) and also including relative gravimetry (RG) and GPS measurements.
ISSN: 0264-3707

hal-00456035
https://hal.archives-ouvertes.fr/hal-00456035
DOI : 10.1016/j.jog.2009.09.004

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
This study investigates three-dimensional flow modes of orogenic plateaus by means of physical modeling. Experiments consist of shortening two contiguous lithospheres of contrasting strength, one being a weak plateau-type lithosphere and the other a strong craton-type lithosphere. The lateral boundaries are either totally confined or allow escape toward a lateral foreland on one side. Two synconvergence flow regimes are distinguished, which are governed by the balance between the gravity potential and the strength of the plateau crust and the resistance of its lateral foreland. The first regime implies transversal (orogen-normal) injection of plateau lower crust into the collision zone as a result of confinement of the plateau by an increasingly stiffer lateral boundary. As a precursor mechanism to channel flow, transversal injection responds to downward thickening of the plateau crust that is forcedly extruded into the orogenic wedge. The second regime is that of collapse-driven lateral escape of the plateau. This regime is established after a threshold is attained in the interplate coupling in the collision zone, which allows the gravity potential of the plateau to overcome the resistance of its lateral boundary. Under the collapse-driven escape regime (orogen parallel), such as that governing Tibet during the last 13 Ma, most of the convergence in the plateau and the top and rear of the collisional wedge is transformed into lateral flow and extension.
ISSN: 0148-0227

hal-01229107
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01229107
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01229107/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01229107/file/2015JB012110_revised.pdf
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01229107/file/SupplementaryMaterial_final.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper focuses on the analyses of the clastic sedimentary infill of the Coastal Plain of Eastern Mexico, which initiated synchronously with the Laramide orogeny in the vicinity of the Golden Lane. Results of these analyses are used as boundary conditions for calibrating/interpreting seismic profiles across more distal depocenters in the offshore of the Gulf of Mexico, from the sea shore and continental slope in the west to the abyssal plain in the east. The objective of the study is to better predict the reservoir distribution in the Deep offshore Basin of the Gulf of Mexico (DBGM), in order to explore for petroleum. The Coastal Plain is underlain by three morpho-tectonic domains: the tectonic front of the Sierra Madre Orientale (SMO), the Chicontepec deep water flexural basin, and the Tuxpan Platform (also known as the Golden Lane). Each domain is characterized by a distinct, dominantly siliciclastic Cenozoic lithostratigraphy. After a Jurassic rifting episode, followed by thermal subsidence, the oceanic basin and its western passive margin were deformed during the Upper Cretaceous and Paleogene, by far field stresses associated with the Cordilleran-Laramide Orogeny. Starting in the Late Cretaceous-Early Paleogene and during the Early Eocene, the tectonic load associated with the Laramide Orogen (Sierra Madre Oriental, SMO) caused flexural subsidence of the foreland located under the Coastal Plain. During this period, a massive transfer of siliciclastic sediments occurred from the Laramide foothills into the adjacent foreland. Sediments were eroded of the Sierra Madre tectonic wedge. Loading by these sediments pushed source units associated with the former passive margin down ward. The first syn-tectonic sediments of the Laramide orogeny were turbiditic silt layers in submarine fans which record also numerous collapse episodes and gravity slides. During the Late Eocene and Oligocene, the flexural subsidence stopped in the hinterland, whereas the subsidence of the passive margin resumed. This resulted in a change in the overall sedimentary architecture of the basin. Paleo-highs and reefs facies of the Golden Lane were flooded. Clastics by-passed the reefs and progradational clastic stratification formed as sediment moved towards the DBGM in the east. The final depositional environment of the continental platform/Coastal Plain became deltaic, marked by a succession of sand bars, levees and channels systems. From Miocene times onward, a system of gravitational listric faults developed near the platform to slope transition, resulting in a coeval compressional system at the transition between the slope and the abyssal plain. This system is driven by sediments charge. Because the sedimentation rate is larger than the subsidence, a large amount of clastics and slumped sediments are deposited in hangingwall basins.
ISSN: 0264-8172

hal-00424586
https://hal.archives-ouvertes.fr/hal-00424586
DOI : 10.1016/j.marpetgeo.2008.03.009

Éditeur(s) : HAL CCSD
Résumé : International audience
Although earthquakes and tsunamis are less frequent in the Dover Straitthan over active subduction zones, a plausible potential exists for intraplate earthquakes of magnitude Mw=6.9 generating a tsunami with damaging consequences. In April 1580, an earthquake shook the region violently and destructions were reported as far as London in the north andRouen in the south. Despite fair weather conditions, a series of abnormal sea waves was reported in several harbours (Calais, Boulogne and Dover) on the same day. A first step was to produce a range of numerical coseismic tsunami simulations and to compare them with historical witness accounts. Results raise the question of whether such earthquakes could also triggerchalk flow-generated tsunamis along cliff lines on both sides of the Strait. Gravity-driven collapses affect thechalk cliffs periodically, but local tsunami waves caused by very large mass movements could reach heights of several meters and, for example, strike Dover.
Proceedings of the 15th World Conference on Earthquake Engineering
Lisbonne, Portugal

halshs-01291496
https://halshs.archives-ouvertes.fr/halshs-01291496

Éditeur(s) : Elsevier Science Bv
Résumé : Volcaniclastic successions are well-described in volcanic arc setting but rare in hotspot environments. The present work proposes a facies model of volcaniclastic sedimentation related to basaltic hotspot volcanoes as exemplified by the Piton de la Fournaise volcano (La Réunion Island). The facies model is based on a multi-scale approach combining high-resolution multibeam and backscatter data, deep-water photographs, side scan imagery and Kullenberg piston cores. Data show that a wide range of gravity flows and erosional features develop in the active volcaniclastic sedimentary system. Coastal and submarine instabilities are the main processes shaping the volcano's submarine morphology. Meanwhile, the evolution and dynamics of the sedimentary system are strongly linked with the morpho-structural evolution of the subaerial part of the volcano. The proposed model is characterized by a cyclic succession of stages: (1) a growing stage during which sedimentary activity is mainly restricted to proximal and mid-slope areas; (2) a collapse stage that entirely reshapes the morphology of the submarine slopes; and (3) an erosional stage related to a slow down of volcanic activity, enabling the development of large deep-sea fans.
Marine Geology (0025-3227) (Elsevier Science Bv), 2013-03 , Vol. 337 , P. 35-52

Droits : 2013 Published by Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/00137/24798/22939.pdf
DOI:10.1016/j.margeo.2013.01.004
http://archimer.ifremer.fr/doc/00137/24798/