Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
– The 300 km long allochthonous sheet of oceanic mantle forming the New Caledonia ophiolite displays three specific characters: 1) the ophiolite pile lacks concordant sheeted dykes and pillow basalt layers; 2) the ophiolite, refered to as the Peridotite nappe, is thrusted over the basaltic formations of the Poya terrane which are classicaly thought to originate from a different oceanic environment; 3) The basal contact of the ultramafic sheet is remarkably flat all along New-Caledonia and the Peridotite nappe has not been thickened during obduction, rather it experienced significant extension. This suggests that the peridotites have not been emplaced by a tectonic force applied to the rear. New petrological and geochemical results obtained from mantle rocks finally show that the Poya terrane may originate from the same oceanic basin as the peridotites. In this article, we consider such possible cogenetic links and we propose a simple model for the obduction of the New Caledonia ophiolite in which the Poya basalts represent the original cover of the Peridotite nappe. We infer that continuous uplift of the subducted units buried beneath the oceanic lithosphere in the northern part of New Caledonia drove passive uplift of the ophiolite and led to erosion and to initiation of sliding of the basaltic layer. During the Priabonian (latest Eocene), products of the erosion of the basaltic layer were deposited together with sediments derived from the Norfolk passive oceanic margin. These sediments are involved as tectonic slices into an accretionary wedge formed in response to plate convergence. The volcaniclastic sedimentation ends up with the emplacement of large slided blocks of basalts and rafted mafic units that progressively filled up the basin. Obduction process ended with the gravity sliding of the oceanic mantle sheet, previously scalped from its mafic cover. This process is contemporaneous with the exhumation of the HP-LT units of Pouebo and Diahot. Gravity sliding was facilitated by the occurrence of a continuous serpentine sole resulting from metasomatic hydratation of mantle rocks, which developed during the uplift of the Norfolk basement and overlying Diahot and Pouébo units. Progressive emersion of the obducted lithosphere allowed subsequent weathering under subaerial, tropical conditions. Obduction passive et mise en place gravitaire des grandes nappes ophiolitiques : les ophiolites de Nouvelle-Calédonie (SW Pacifique) sont-elles un cas d'école ? Résumé. – La nappe de manteau de Nouvelle-Calédonie, s'étendant sur 300 km de long montre trois caractéristiques im-portantes: 1) La succession ophiolitique ne contient ni dykes, ni basaltes en coussin, 2) l'ophiolite est charriée sur des formations basaltiques (nappe de Poya) que l'on considère classiquement comme originaires d'un bassin océanique dif-férent de celui d'où est issu le manteau, et 3) le contact basal de la nappe ultrabasique est remarquablement plat tout le long de l'île et celle-ci n'a pas été épaissie durant l'obduction. Cela suggère que les péridotites n'ont pas été mises en place en réponse à une poussée tectonique arrière. De nouveaux résultats pétrologiques et géochimiques obtenus sur l'ophiolite montrent en réalité que les basaltes de Poya peuvent être extraits de la fusion du manteau de l'ophiolite. Nous proposons donc un nouveau modèle pour l'obduction, dans lequel les basaltes de Poya forment la couver-ture initiale primitive du manteau de la nappe des péridotites. La surrection progressive des unités profondes enfouies lors de la subduction de la lithosphère du bassin sud-Loyauté à l'Eocène, a permis le soulèvement passif de l'ophiolite et l'érosion puis le glissement des unités basaltiques. Durant le Priabonien, l'accumulation des produits de l'érosion de la couche des basaltes et de la marge passive de Norfolk ont formé les séquences de flysch comprenant localement des débris basaltiques grossiers. Ces sédiments font partie d'un prisme d'accrétion tectonique construit en réponse à la convergence au front de la subduction. La sédimentation détritique se termine par la mise en place de grandes unités ba-saltiques glissées qui comblent le bassin. Le processus de l'obduction se termine par le glissement gravitaire de l'écaille de manteau océanique sur les basaltes. Cet événement est contemporain de l'exhumation des unités HP-BT de Pouébo et du Diahot. Le glissement gravitaire a été facilité par la présence sous l'ophiolite, d'une semelle continue de serpentines résultant de l'interaction du manteau avec des fluides métasomatiques remontant durant l'exhumation des unités en-fouies pendant la subduction continentale. L'émersion progressive de la lithosphère obduite a placé le manteau dans des conditions d'altération supergène tropicale.
EISSN: 1777-5817

hal-01257702
https://hal.archives-ouvertes.fr/hal-01257702
https://hal.archives-ouvertes.fr/hal-01257702/document
https://hal.archives-ouvertes.fr/hal-01257702/file/Lagabrielleetal-BSGF-2012-revised-light.pdf
DOI : 10.2113/gssgfbull.184.6.545

Éditeur(s) : Institut de Ciències del Mar de Barcelona, CSIC
Résumé : Acoustic and core data have recently been collected on the shelf break and the upper part of the slope of the south Aquitaine continental margin. They reveal the major role played by mass-flow gravity processes in deposit erosion and redistribution, modelling of the sea-bed, and transfer of sediment toward the deep-sea. The study region is bounded in the south by the Capbreton canyon. The northern area, which shows a smooth morphology, is characterised by small-scale deformations due to sediment creep or low-amplitude slide processes. The deformations are associated with mini listric-like faults that bound packets of sediments in which the deposit geometry is typical of constructional sediment waves. These sediment waves result from the interaction of depositional and gravity deformation processes. In the southern area, closer to the canyon, wave-like structures are still present but mostly of smaller size. They only result from gravity deformation processes without any evidence of constructional processes. In the vicinity of the Capbreton canyon, the shelf break and upper slope have a much more uneven morphology with sedimentary reliefs, escarpments and depressions directed toward the canyon thalweg. The depressions look like slide scars, and could be the result of regressive slides initiated at the top of the canyon flank. The age of the sliding event responsible for the formation of the depression observed today could be middle to upper Quaternary. Since their formation, these depressions act as conduits that channel the transfer of shelf sediment into the canyon, as demonstrated by the occurrence of a meandering channel on the sea-floor of one depression.
Scientia Marina (0214-8358) (Institut de Ciències del Mar de Barcelona, CSIC), 2006-06 , Vol. 70 , N. 1 , P. 89-100

Droits : 2006 Institut de Ciències del Mar de Barcelona
http://archimer.ifremer.fr/doc/2006/publication-3960.pdf
http://archimer.ifremer.fr/doc/00000/3960/

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Pyrenean peridotites (lherzolites) form numerous small bodies of subcontinental mantle, a few meters to 3 km across, exposed within the narrow north Pyrenean zone (NPZ) of Mesozoic sediments paralleling the north Pyrenean Fault. Recent studies have shown that mantle exhumation occurred along the future NPZ during the formation of the Albian-Cenomanian Pyrenean basins in relation with detachment tectonics. This paper reviews the geological setting of the Pyrenean lherzolite bodies and reports new detailed field data from key outcrops in the Bearn region. Only two types of geological settings have to be distinguished among the Pyrenean ultramafic bodies. In the first type (sedimented type or S type), the lherzolites occur as clasts of various sizes, ranging from millimetric grains to hectometric olistoliths, within monogenic or polymictic debris flow deposits of Cretaceous age, reworking Mesozoic sediments in dominant proportions as observed around the Lherz body. In the second type (tectonic type or T type), the mantle rocks form hectometric to kilometric slices associated with crustal tectonic lenses. Both crustal and mantle tectonic lenses are in turn systematically associated with large volumes of strongly deformed Triassic rocks and have fault contacts with units of deformed Jurassic and Lower Cretaceous sediments belonging to the cover of the NPZ. These deformed Mesozoic formations are not older that the Aptian-early Albian. They are unconformably overlain by the Albian-Cenomanian flysch formations and have experienced high temperature-low pressure mid-Cretaceous metamorphism at variable grades. Such a tectonic setting characterizes most of the lherzolite bodies exposed in the western Pyrenees. These geological data first provide evidence of detachment tectonics leading to manle exhumation and second emphasize the role of gravity sliding of the Mesozoic cover in the preorogenic evolution of the Pyrenean realm. In the light of such evidence, a simple model of basin development can be inferred, involving extreme thinning of the crust, and mantle uprising along a major detachment fault. We demonstrate coeval development of a crust-mantle detachment fault and generalized gravitational sliding of the Mesozoic cover along low-angle faults involving Triassic salt deposits as a tectonic sole. This model accounts for the basic characteristics of the precollisional rift evolution in the Pyrenean realm.
ISSN: 0278-7407

hal-00512818
https://hal.archives-ouvertes.fr/hal-00512818
DOI : 10.1029/2009TC002588

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep-seated gravitational spreading (DSGS) affects the slopes of formerly glaciated mountain ridges. On Mars, DSGS has played a key role in shaping the landforms of the giant Valles Marineris troughs. Though less spectacular, DSGS is common in terrestrial orogens, where understanding its mechanics is critical in the light of the ongoing climate change because it is a potential source of catastrophic landslides in deglaciated valleys. We conducted parametric numerical studies in order to identify important factors responsible for DSGS initiation. DSGS models are computed using an elastoviscoplastic finite element code. Using ADELI's software, we reproduce topographic ridge spreading under the effect of valley unloading. Two types of spreading topographic ridges are investigated, homogeneous or with horizontal rheological layering. We find that gravitational instabilities are enhanced by high slopes, which increase gravitational stress, and low friction and cohesion, which decrease yield stress. In the unlayered ridge, instability is triggered by glacial unloading with plastic strain concentration inside the ridge and at the base of the high slopes. Vertical fractures develop in the upper part of the slope, potentially leading to fault scarps. Ridge homogeneity promotes a deformation mode controlled by uphill-facing normal faulting and basal bulging. In the second case, the ridge encompasses horizontal geological discontinuities that induce rock mass anisotropy. Discontinuity located at the base of the slope accumulates plastic strain, leading to the formation of a sliding plane evolving into a landslide. The presence of a weak layer at ridge base therefore promotes another slope deformation mode ending up with catastrophic failure. Mechanical conditions and slope height being equal, these conclusions can probably be extrapolated to Earth. Compared with Mars, DSGS on Earth is inhibited because terrestrial topographic gradients are lower than in Valles Marineris, an effect counterbalanced by increased gravitational stress, where the intensity of deformation is enhanced because of the Earth gravity potential.
ISSN: 0169-555X

hal-01420007
https://hal.archives-ouvertes.fr/hal-01420007
DOI : 10.1016/j.geomorph.2016.06.011