Éditeur(s) : HAL CCSD Société géologique de France
Résumé : The mechanical equilibrium of an orogenic wedge is maintained thanks to interactions between tectonic processes and surface processes. To better constrain the influence of erosion and sedimentation on the evolution of orogens, we performed a series of analogue models based on the tapered wedge principle, varying the amounts of erosion and sedimentation. The models develop by frontal accretion in the foreland basin and by simple underthrusting and subsequent underplating in the hinterland. The variations in rates of erosion and sedimentation strongly modify the extent, the morphology, the structures, the timing of development and the material paths in the different models. Under certain conditions, entire structural units can be formed and subsequently eroded out of the geological record, leading to important underestimations when restoring sections. Particles located in the converging lower-plate or in the upper-plate show complex uplift paths related to tectonic stages. The correlation between models and three Alpine tectonic cross-sections emphasizes the role of erosion and sedimentation on the dynamics and development of the orogen and adjacent Molasse basin. Along strike changes in the present structure of the orogen could be explained in part by differences in surface processes.
EISSN: 1777-5817

hal-00411140
https://hal.archives-ouvertes.fr/hal-00411140
DOI : 10.2113/gssgfbull.3.297

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Correlations between major and minor transition elements in tectonically emplaced orogenic peridotites have been ascribed to variable degrees of melt extraction and melt–rock reaction processes, leading to depletion or refertilization. To elucidate how such processes are recorded in the subcontinental lithospheric mantle, we processed a large geochemical dataset for peridotites from the four tectono-metamorphic domains of the Beni Bousera orogenic massif (Rif Belt, northern Morocco). Our study reveals that variations in bulk-rock major and minor elements, Mg-number and modal mineralogy of lherzolites, as well as their clinopyroxene trace element compositions, are inconsistent with simple partial melting and mainly resulted from different reactions between melts and depleted peridotites. Up to 30% melting at < 3 GPa and cryptic metasomatism can account for the geochemical variations of most harzburgites. In Grt–Sp mylonites, melting and melt–rock reactions are masked by tectonic mixing with garnet pyroxenites and subsolidus re-equilibration. In the rest of the massif, lherzolites were mostly produced by refertilization of a refractory protolith (Mg-number ∼ 91, Ol ∼ 70%, Cpx/Opx = 0·4) via two distinct near-solidus, melt–rock reactions: (1) clinopyroxene and orthopyroxene precipitation and olivine consumption at melt/rock ratios <0·75 and variable mass ratio between crystallized minerals and infiltrated melt (R), which are recorded fairly homogeneously throughout the massif; (2) dissolution of orthopyroxene and precipitation of clinopyroxene and olivine at melt/rock ratios ≤1 and R = 0·2–0·3, which affected mainly the Ariègite–Seiland and Seiland domains. The distribution of secondary lherzolites in the massif suggests that the first refertilization reaction occurred prior to the differentiation of the Beni Bousera mantle section into petro-structural zones, whereas the second reaction was associated with the development of the tectono-metamorphic domains. Our data support a secondary, refertilization-related origin for most lherzolites in orogenic peridotite massifs.
ISSN: 0022-3530

hal-01526901
https://hal.archives-ouvertes.fr/hal-01526901
DOI : 10.1093/petrology/egx003

Éditeur(s) : HAL CCSD
Résumé : High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. Their complete exhumation is the result of processes acting during (syn-orogenic) and after (post-orogenic) subduction is active, the latter partly obliterating the first. In the Aegean domain, the Attic-Cycladic Blueschist unit (ACBU) is a HP-LT unit exhumed in metamorphic core complexes (MCCs) in the back-arc domain of the Hellenic subduction zone. This study is an attempt to distinguish features related to syn-orogenic exhumation processes responsible for the first stages of exhumation This syn-orogenic "message" has to be read through the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation has to be determined. We investigate these features with coupled field, metamorphic petrology and radiochronology studies First, based on observations on Ios (southern Cyclades), it has recently been proposed that syn-orogenic exhumation of the ACBU was accommodated by a basal thrust over the Cycladic Basement (CB) [Huet, et al., 2009]. The peak conditions, deduced from pseudosections calculation for the Ios main lithologies, are 500 °C-19 kbar for the ACBU and 550 °C-16 kbar for the CB. Exhumation until 400 °C-8 kbar is considered as syn-orogenic. Second, phengites populations, single grains and in situ 40Ar-39Ar geochronology has been carried out on samples from Tinos and Andros (northern Cyclades), Syros (central Cyclades) and Ios. The results gather in several clusters: 50-55 Ma, 40-45 Ma, 30-35 Ma, and 22-26 Ma. Based on these new P-T-t data and a synthesis of published data, we are able to refine the geometry and the timing of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in ages and P-T conditions for the successive stages of exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma from Tinos to Ios. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a thrust at their bottom and a detachment at their top. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. Finally, we propose a model for the exhumation of HP-LT units accounting for these data. We also consider the rheological implications of the syn-orogenic structuration of the Aegean wedge on the post-orogenic evolution. B. Huet, L. Labrousse, and L. Jolivet [2009] Thrust or detachment? Exhumation processes in the Aegean: Insight from a field study on Ios (Cyclades, Greece), Tectonics, 28, 3, doi:10.1029/2008TC002397.
EGU General Assembly
Vienne, Austria

insu-00839054
https://hal-insu.archives-ouvertes.fr/insu-00839054
BIBCODE : 2010EGUGA..1214098H

Éditeur(s) : HAL CCSD MAIK Nauka/Interperiodica
Résumé : Interaction between surface processes and deep tectonic processes plays a key role in the structural evolution, kinematics and exhumation of rocks in orogenic wedges. The deformation patterns observed in analogue models applied to natural cases of present active or ancient mountain belts reflect several first order processes that result of these interactions. Internal strain partitioning due to mechanical behaviour of a thrust wedge has a strong impact on the vertical component of displacement of tectonic units that in return favour erosion in domains of important uplift. Such strain partitioning is first controlled by tectonic processes, but surface processes exert a strong feed back on wedge dynamics. Indeed, material transfer in thrust wedges not only depends on its internal dynamics, it is also influenced by climate controlled surface processes involving erosion and sedimentation. Effects of erosion are multiple: they allow long term localization of deformed domains, they favour important exhumation above areas of deep underplating and combined with sedimentation in the foreland they contribute to maintain the wedge in a critical state for long time periods. The simple models illustrate well how mountain belts structure, kinematics of tectonic units and exhumation are determined by these complex interactions.
ISSN: 0016-8521

hal-00561361
https://hal.archives-ouvertes.fr/hal-00561361
DOI : 10.1134/S0016852110060075

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : orogenic wedges
Interaction between surface and tectonic processes plays a key role in the structural evolution, kinematics, and exhumation of rocks in orogenic wedges. The deformation patterns observed in analog models show that strain partitioning has a strong impact on the vertical component of displacement of tectonic units, which in return favors erosion in domains of important uplift. Partitioning is controlled by tectonic processes and by climate-dependent surface processes, including erosion and sedimentation. The effects of partitioning include localization of deformed domains, exhumation above areas of deep underplating, and steady-state maintenance of wedges for long time periods. Simple models illustrate well how the morphostructural evolution of mountain belts is determined by these complex interactions.
ISSN: 1052-5173

hal-00558931
https://hal.archives-ouvertes.fr/hal-00558931
DOI : 10.1130/GSATG48A.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In southeastern Taiwan a slice of forearc basement belonging to the Philippine Sea Plate upper-plate is suspected to subduct under the Luzon arc as a consequence of the transition from oceanic to incipient continental subduction. Effects on the morphology, deformation, geometry of structures and tectonic evolution of the orogenic wedge in the collision area are numerous. This study examines the impact of foreare lithosphere subduction on forearc basin and accretionary wedge deformation. A morpho-structural analysis of the geological features observed onland and offshore allows describing in detail the complex deformation suffered by the area. A combined approach by analogue modeling is applied to better understand the phenomenon. Comparison between nature and experimental results shows that subduction of a forearc basement slice induces intense shortening and concomitant deformation in the foreare domain. Such process involves deformation of the foreare basin previously developed in a setting of oceanic subduction. Sediments of the forearc basin are involved in the growth of a new thrust ridge backthrusted against the basement slope of the volcanic arc edifice. Sediments coming from the growing orogenic wedge are trapped in the trough developed between its backpart and the topographic high of the new rising ridge. A syn-collisional orogenic basin develops which structural evolution characterizes the progressive shortening of the forearc domain. Most of the deformation and tectonic events recorded offshore or onland in the complex area south of Taiwan can be explained using results of our specific modeling which well describe the tectonic processes associated with continental subduction under a volcanic are.
ISSN: 0040-1951

hal-00420080
https://hal.archives-ouvertes.fr/hal-00420080
DOI : 10.1016/j.tecto.2007.11.016

Éditeur(s) : HAL CCSD
Résumé : International audience
High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. The question of their exhumation is nevertheless still unclear. The Aegean domain offers several HP-LT belts. Especially, the Attic-Cycladic Blueschist unit (ACBU) is an example of a HP-LT unit exhumed in a convergent and then in a divergent context. It actually appears in metamorphic core complexes (MCCs) formed in the back-arc of the subduction. The syn-convergence "message" is however difficult to read because of the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation remain unclear. We investigate theses questions with metamorphic petrology (Andros and Ios islands) and phengite population, single grain and in situ 40Ar-39Ar geochronology (Andros, Tinos, Syros and Ios islands). Based on these new constraints and a synthesis of published data, we are able to refine the geometry, the timing and the modes of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in the age and P-T conditions at the successive stages of syn-orogenic exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a basal thrust and a summital detachment. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. The change in boundary conditions is recorded by slowing of the exhumation and isobare heating. The conditions of post-orogenic exhumation differ from an island to another. The onset of post-orogenic exhumation is dated around 30 Ma in the northern Cyclades and 25 Ma in the southern Cyclades. It is related to top-to-the-North deformation in all the studied domain. The end of ductile deformation below the detachments is also diachronous (21 Ma in the North and 18 Ma in the South). Finally, we propose a model for the final steps of the exhumation related to the intrusion of granitic bodies around 14 Ma.
American Geophysical Union, Fall Meeting
San Francisco, United States

insu-00860510
https://hal-insu.archives-ouvertes.fr/insu-00860510
BIBCODE : 2010AGUFM.T23C2301L

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : TECTO LITHO
On the basis of a section across the northwestern Alpine wedge and foreland basin, analogue modeling is used to investigate the impact of surface processes on the orogenic evolution. The basis model takes into account both structural and lithological heritages of the wedge. During shortening, erosion and sedimentation are performed to maintain a critical wedge. Frontal accretion leads to the development of a foreland thrust belt; underplating leads to the formation of an antiformal nappe stack in the internal zones. Important volumes of analogue materials are eroded out of the geological record, which in the case of the Alps suggests that the original lengths and volumes may be underestimated. The foreland basin evolves differently depending on the amounts of erosion/sedimentation. Its evolution and internal structuring is governed by the wedge mechanics, thought to be the main controlling mechanism in the development of the Molasse basin in a feedback interaction with surface processes.
ISSN: 0278-7407

hal-00404424
https://hal.archives-ouvertes.fr/hal-00404424
DOI : 10.1029/2006TC002048

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
We present a new 3-D GPS velocity solution for 182 sites for the region encompassing the Western Alps, Pyrenees, and southern France. The velocity field is based on a Precise Point Positioning (PPP) solution, to which we apply a common-mode filter, defined by the 26 longest time series, in order to correct for network-wide biases (reference frame, unmodeled large-scale processes, etc.). We show that processing parameters, such as troposphere delay modeling, can lead to systematic velocity variations of 0.1–0.5 mm yr−1 affecting both accuracy and precision, especially for short (< 5 years) time series. A velocity convergence analysis shows that minimum time-series lengths of  ∼  3 and  ∼  5.5 years are required to reach a velocity stability of 0.5 mm yr−1 in the horizontal and vertical components, respectively. On average, horizontal residual velocities show a stability of  ∼  0.2 mm yr−1 in the Western Alps, Pyrenees, and southern France. The only significant horizontal strain rate signal is in the western Pyrenees with up to 4  ×  10−9 yr−1 NNE–SSW extension, whereas no significant strain rates are detected in the Western Alps (< 1  ×  10−9 yr−1). In contrast, we identify significant uplift rates up to 2 mm yr−1 in the Western Alps but not in the Pyrenees (0.1 ± 0.2 mm yr−1). A correlation between site elevations and fast uplift rates in the northern part of the Western Alps, in the region of the Würmian ice cap, suggests that part of this uplift is induced by postglacial rebound. The very slow uplift rates in the southern Western Alps and in the Pyrenees could be accounted for by erosion-induced rebound.
ISSN: 1869-9529

hal-01395116
https://hal.archives-ouvertes.fr/hal-01395116
https://hal.archives-ouvertes.fr/hal-01395116/document
https://hal.archives-ouvertes.fr/hal-01395116/file/nguyen2016.pdf
DOI : 10.5194/se-7-1349-2016

Éditeur(s) : HAL CCSD
Résumé : In Taiwan , the subduction of the Chinese continental margin under the Luzon arc results in the progressive growth of an active orogenic wedge. It is one of the best places to study the complex relationships that occurs between the tectonic processes controlling deformation (plate rheology and kinematics, metamorphism and magmatism) and surface processes (erosion and sedimentation). In order to study the kinematics of the present day convergence of Philippine Sea plate to the Asian continent around Taiwan, we perform 2D and 3D sandbox modeling and we analyzed the models with PIV (Particle Image Velocimetry) software. In 2D experiments, a model Coulomb wedge is submitted to erosion and sedimentation under topography and flux steady state conditions. The 3D experiments are mainly used to study the escape tectonics occurring in the middle west and southwest Taiwan. A wedge shaped indenter and a basement relief were used to simulate the mechanical plate boundary between Philippine Sea plate and Eurasia plate and the basement topography to the west of Taiwan respectively. We examine the exhumation patterns, the mode of fault propagation and displacement patterns by strain partitioning of vertical vs. horizontal displacement and convergent parallel vs. orogen parallel components. The preliminary conclusions are: 1. The interactions between tectonics, erosion and sedimentation control geometry and kinematics of the doubly vergent transpressional orogen. 2. Exhumation processes are controlled by the balance between erosion, frontal accretion and underplating in different structural domains of the wedge. 3. Retrowedge erosion favorites backfolding and backthrusting, induces flower structures and fan shaped cleavage distribution. 4. Sedimentation promotes underplating and out-of sequences thrusting. 5. Continental subduction or subduction of topographic highs will enhance underthrusting/underplating, thick-skin tectonics and inversion of sedimentary basin.
Bolletino di Geofisica teorica ed applicata

hal-00411133
https://hal.archives-ouvertes.fr/hal-00411133

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The volume comprises some of the contributions presented during the 10th edition of the Alpine Meeting "CorseAlp 2011". It has been held in Saint Florent (Corsica) between 10th and 16th of April 2011 under the auspices of Societé Geologique de France, Società Geologica Italiana and the INGV (Istituto Nazionale di Geofisica e Vulcanologia) and with the collaboration of colleagues of Université de Corse (M.-M. Spella, M. and J. Ferrandini and L. Ciancaleoni) and the support of the city council of S. Florent. The meeting was framed in the series of "Alpine Workshops" e.g., Siegesmund et al. (2008), Handy and Rosenberg (2011), which are held every two years to develop interdisciplinary research on Alpine-type orogens. It hosted a variety of topical sessions from regional geology to process-oriented field and laboratory studies and gave the opportunity to collect multidisciplinary and multiscale approaches to geodynamic studies including continental rifting and ocean opening, oceanic and continental subduction, late- to post orogenic extension, exhumation of deep seated rocks, back-arc opening and microcontinent rotation, interfering orogenic-scale tectonics and surface processes, tectonics and seismic hazard within the Alpine chain and Mediterranean realms.
ISSN: 0040-1951

hal-00795580
https://hal.archives-ouvertes.fr/hal-00795580

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study provides new Ar-40/Ar-39 geochronological constraints on the age of the Alpine tectonics in the Aspromonte Massif (southern part of the Calabrian-Peloritan belt). This massif exposes the upper units of the Calabride Complex which originated from the European continental margin. The Calabride Complex was incorporated in the Alpine orogenic wedge and then integrated into the Apennines and Maghrebides fold- and-thrust belts. Throughout the Calabride Complex there is evidence for a two stage tectonic history, which remains however rather poorly dated: Alpine nappe stacking is followed by extensional reworking along the former thrust contacts or along new detachment surfaces. Our new ages suggest that exhumation of the uppermost units, which accompanied nappe stacking, probably started at 45 Ma and that the deepest units were almost completely exhumed at 33 Ma. This kinematics probably corresponds to syn-orogenic extension while the end of exhumation is clearly related to the extensional tectonics dated at 28.6 Ma along detachment structures.;Our geochronological data reveal a very short lag time between accretional and extensional processes in this part of the Mediterranean Alpine orogenic belt. The direction of extension, when the units are restored to their initial position (i.e. before the opening of the Western Mediterranean basins and the bending of the arc) is NNE-SSW. Such a direction does not fit with the eastward slab-retreat model generally put forward to explain extension in the Western Mediterranean. In contrast, we provide evidence for roughly N-S middle Oligocene extension in the accretionary prism, not previously described in this part of the Mediterranean domain.
ISSN: 0024-4937

hal-00475649
https://hal.archives-ouvertes.fr/hal-00475649
DOI : 10.1016/j.lithos.2009.10.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Subduction processes play a major role in plate tectonics and the subsequent geological evolution of Earth. This special issue focuses on ongoing research in subduction dynamics to a large extent (oceanic subduction, continental subduction, obduction…) for both past and active subduction zones and into mountain building processes and the early evolution of orogens. It puts together various approaches combining geophysics (imaging of subduction zones), petrology/geochemistry (metamorphic analysis of HP-UHP rocks, fluid geochemistry and magmatic signal, geochronology), seismology and geodesy (present-day evolution of subduction zones, active tectonics), structural geology (structure and evolution of mountain belts), and numerical modelling to provide a full spectrum of tools that can be used to constrain the nature and evolution of subduction processes and orogeny. Studies presented in this special issue range from the long-term (orogenic cycle) to short-term (seismic cycle).
ISSN: 0264-3707

insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985/document
https://hal-insu.archives-ouvertes.fr/insu-01287985/file/rolland-2016.pdf
DOI : 10.1016/j.jog.2016.03.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Highly siderophile elements (Platinum-group elements, Au and Re) are currently assumed to reside inside base metal sulfides (BMS) in the convecting upper mantle. However, fertile lherzolites sampled by Pyrenean orogenic peridotite massifs are unexpectedly rich in 0.5-3 mu m large micronuggets of platinum-group minerals (PGM). Among those, sulfides from the laurite-erlichmanite series (Ru, Os(Ir)S(As)2), Pt-Ir-Os alloys and Pt-Pd-Te-Bi phases (moncheite-merenskyite) are predominant. Not only the BMS phases but also the PGM micronuggets must be taken into account in calculation of the PGE budget of orogenic fertile lherzolites. Laurite is a good candidate for equilibrating the whole-rock budget of Os, it and Ru while accounting for supra-chondritic Ru/Ir-N. Textural relationships between PGMs and BMS highlight heterogeneous mixing between refractory PGMs (laurite/Pt-Ir-Os alloys) inherited from ancient refractory lithospheric mantle and late-magmatic metasomatic sulfides precipitated from tholeiitic melts. "Low-temperature" PGMs, especially Pt-Pd bismuthotellurides should be added to the list of mineral indicators of lithosphere refertilization process. Now disseminated within fertile lherzolites, "lithospheric" PGMs likely account for local preservation of ancient Os model ages (up to 2 Ga) detected in BMS by in-situ isotopic analyses. These PGMs also question the reliability of orogenic lherzolites for estimating the PGE signature of the Primitive Silicate Earth.
ISSN: 0012-821X

hal-00486109
https://hal.archives-ouvertes.fr/hal-00486109
DOI : 10.1016/j.epsl.2009.11.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Whole-rock concentrations of Se and Te were determined in 53 peridotite samples collected in orogenic bodies from the Eastern Pyrenees, including the Lherz massif (33 samples), the type-locality of Iherzolite. Orogenic Iherzolites tectonically emplaced into the continental crust escaped devolatilisation that may strongly alter concentrations of those volatile trace elements in basalt-hosted peridotite xenoliths. The Se and Te concentration ranges (<3.5-100.7 ppb; <1-11 ppb) are consistent with the few analyses of mantle samples yet available, yet extending to higher Se concentrations. In-situ analyses performed by LAM-ICPMS on base metal sulfides indicate that the Se budget is controlled by sulfides whereas a large fraction of Te (50 +/- 30%) does not reside in sulfides. The missing fraction is accounted for by fractional crystallization of Pt-Pd tellurides from Cu-Ni sulfide melts. A maximum of one third of the S budget of Eastern Pyrenean peridotites was added by assimilation of crustal sulfides, which crystallized as pyrite. Disregarding those contaminated samples, some features of the Se and Te systematics (e.g. bivariate plots vs. fertility index) cannot be explained by partial melting processes. The best fit for 33 peridotites (mostly from Lherz) yields higher than chondritic S/Se (3.1213 +/- 500; r(2) = 0.96) for near chondritic Se/Te (8.6 +/- 2; r(2) = 0.9). Our study suggest that such superchondritic S/Se ratios are better explained by petrogenetic processes involving refertilization of harzburgitic lithosphere by metal (Cu,Ni)-rich sulfide melts precipitated along with clinopyroxene and Al-spinel from silicate melts en-route to the surface.
ISSN: 0009-2541

hal-00544577
https://hal.archives-ouvertes.fr/hal-00544577
DOI : 10.1016/j.chemgeo.2010.09.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : Differentiation of the Earth's mantle and formation of continental and oceanic crust occur principally through partial melting and extraction of basaltic melt. Among the mantle rocks occurring at the Earth's surface, as tectonically-emplaced massifs, abyssal peridotites or xenoliths, the harzburgites (< 5% clinopyroxene) are widely considered as refractory mantle residues left after extraction of a basaltic component. In contrast, the most fertile lherzolites (15% clinopyroxene) are generally regarded as pristine mantle, only weakly affected by partial melting. In this paper we present new convergent structural and geochemical data from the Lherz massif, the type-locality of lherzolite, indicating that the lherzolites from Lherz do not represent pristine mantle. Detailed structural mapping clearly shows that the lherzolites are secondary rocks formed at the expense of the harzburgites. Variations of major, minor and trace elements through the harzburgite–lherzolite contacts indicate that the lherzolites were formed through a refertilization process involving interaction of refractory, lithospheric mantle with upwelling asthenospheric partial melts. Combined with previously published indications of refertilization in orogenic peridotites, our new observations in Lherz suggest that most lherzolite massifs represent secondary (refertilized) rather than pristine mantle. Together with geochemical data on mantle xenoliths, this indicates that melt transport and melt-rock reaction play a key role on the rejuvenation and erosion of the lithospheric mantle.
ISSN: 0012-821X

hal-00406433
https://hal.archives-ouvertes.fr/hal-00406433
DOI : 10.1016/j.epsl.2007.05.026

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The Alps/Apennines system, as well as many collisional orogens through the world, shows a finite deformation produced during a long geological history which involves numerous superimposed tectonic events. As a result, complex and often contrasted reconstructions for the setting and tectonics of the different stages of the growing and interfering Alps/Apennines system have been proposed. To enlight some of the geometric and kinematic signatures related to past geodynamics in the composite Alps(Corsica)/Apennines system, we analyse the major deformation processes, their superimposition, and resulting finite structural geometries in the currently growing Taiwan orogenic system. The Taiwan island and its offshore northward and southward prolongations represent the emerged and the sub-marine parts of an orogenic wedge related to the interactions between the Eurasian and the Philippine Sea and recording different subduction settings. Using the Taiwan actualistic geodynamic scenarios and the related first-order geometric-kinematic constraints, we will attempt a reconstruction of the tectonic evolution for the Corsica/Apennines orogenic system foregrounding the key role of continental subduction and subduction reversal during such evolution.
ISSN: 1437-3254

hal-00617149
https://hal.archives-ouvertes.fr/hal-00617149
DOI : 10.1007/s00531-010-0598-y

Éditeur(s) : HAL CCSD
Résumé : Based on fieldwork and modern analytical technics, this work presents an overview of the Mid-Cretaceous hyper-extended rift system exposed in the northern part of the Pyrenean mountain range. Its inversion during the Pyrenean orogeny allows for precious observations of the deep-seated processes occurring at the foot of distal margins. Some peculiar aspects characterizing the pre-Alpine hyper-extended domain are examined throughout the 400km long suture that is fossilized in the North Pyrenean Zone (NPZ). The High Temperature/Low Pressure (HT/LP) thermal imprint of the extensional event is studied thanks to a dataset of more than hundred peak temperature measurement by Raman spectroscopy of the carbonaceous material (RSCM). The pre- and syn-rift metasediments are characterized by an intense ductile deformation. Field and EBSD investigations of the mechanisms of deformation reveal ductile and syn-metamorphic processes. The emplacement conditions of the peridotite into crustal levels and localized exhumation is examined in the key-localities of Urdach, Saraillé-Tos de la Coustette, Moncaup, Lherz, Caussou-Bestiac and Salvezines, The results indicate an early boudinage of the crust during the rifting process, resulting in the direct superposition of pre-rift sediments on top of mantle peridotites. Field, textural and isotopic characterization of the various ophicalcite and breccias found in the vicinity of the peridotite outcrops allow to decipher their exhumation history. New Ar-Ar geochronological results allow to precise the temporal evolution of the NPZ.
Cette thèse présente une analyse structurale et thermique des marges passives crétacées inversées dans la Zone Nord Pyrénéenne (ZNP). L'application du paléothermomètre RSCM (spectrométrie Raman de la matière carbonée) sur plus de cent échantillons répartis à travers la ZNP permet de préciser l'évolution thermique de la déchirure continentale. Un métamorphisme de haute température (450 à >600°C) se développe particulièrement au droit de zones ou la croûte continentale est extrêmement amincie voire éliminée. Les sédiments pré- et syn-rift sont marqués par une intense déformation ductile. L'analyse à l'EBSD des fabriques minérales indique une déformation de Haute-température contemporaine du métamorphisme HT-BP. Les conditions de mise en place crustale des péridotites et leur exhumation localisée sont examinées dans les localités d'Urdach, Saraillé-Tos de la Coustette, Moncaup, Lherz, Caussou-Bestiac et Salvezines. Les résultats indiquent un boudinage de la croûte continentale au cours du processus de rifting. Des décollements de couverture, principalement localisés dans les évaporites triasiques conduisent à la superposition directe des sédiments pré-rift sur le manteau exhumé. La notion nouvelle de soutirage crustal est introduite pour désigner ce processus dans lequel l'écoulement gravitaire ne joue pas un rôle principal. La caractérisation sédimentologique, pétrographique et isotopique (O et C) des différentes formations de brèches et ophicalcites observées à proximité des corps de péridotites permet de reconstituer les étapes de l'exhumation du manteau en pied de marge. Enfin de nouvelles datations permettent de mieux contraindre le calendrier des évènements successifs.
https://tel.archives-ouvertes.fr/tel-00787952

tel-00787952
https://tel.archives-ouvertes.fr/tel-00787952
https://tel.archives-ouvertes.fr/tel-00787952/document
https://tel.archives-ouvertes.fr/tel-00787952/file/TheI_se-Clerc-2012.pdf

Éditeur(s) : HAL CCSD Cambridge University Press (CUP)
Résumé : International audience
This paper presents a synthetic view of the geodynamic evolution of the Zagros orogen within the frame of the Arabia-Eurasia collision. The Zagros orogen and the Iranian plateau preserve a record of the long-standing convergence history between Eurasia and Arabia across the Neo-Tethys, from subduction/obduction processes to present-day collision (from ~ 150 to 0 Ma). We herein combine the results obtained on several geodynamic issues, namely the location of the oceanic suture zone, the age of oceanic closure and collision, the magmatic and geochemical evolution of the Eurasian upper plate during convergence (as testified by the successive Sanandaj-Sirjan, Kermanshah and Urumieh-Dokhtar magmatic arcs), the P-T-t history of the few Zagros blueschists, the convergence characteristics across the Neo-Tethys (kinematic velocities, tomographic constraints, subduction zones and obduction processes), together with a survey of recent results gathered by others. We provide lithospheric-scale reconstructions of the Zagros orogen from ~ 150 to 0 Ma across two SW-NE transects. The evolution of the Zagros orogen is also compared to those of the nearby Turkish and Himalayan orogens. In our geotectonic scenario for the Zagros convergence, we outline three main periods/regimes: (1) the Mid to Late Cretaceous (115-85 Ma) corresponds to a distinctive period of perturbation of subduction processes and interplate mechanical coupling marked by blueschist exhumation and upper-plate fragmentation, (2) the Paleocene-Eocene (60-40 Ma) witnesses slab break-off, major shifts in arc magmatism and distributed extension within the upper plate, and (3) from the Oligocene onwards (~ 30-0 Ma), collision develops with a progressive SW migration of deformation and topographic build-up (Sanandaj-Sirjan Zone: 20-15 Ma, High Zagros: ~12-8 Ma; Simply Folded Belt: 5-0 Ma) and with partial slab tear at depths (~10 Ma to present). Our reconstructions underline the key role played by subduction throughout the whole convergence history. We finally stress that such a long-lasting subduction system with changing boundary conditions also makes the Zagros orogen an ideal natural laboratory for subduction processes.
ISSN: 0016-7568

insu-00616582
https://hal-insu.archives-ouvertes.fr/insu-00616582
https://hal-insu.archives-ouvertes.fr/insu-00616582/document
https://hal-insu.archives-ouvertes.fr/insu-00616582/file/692.full.pdf
DOI : 10.1017/S001675681100046X