Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : With the assistance of the ASTER team (M. Arnold, G. Aumaître, D. Bourlès, and K. Keddadouche)
International audience
The Bulnay earthquake of 23 July 1905 (Mw 8.3–8.5), in north‐central Mongolia, is one of the world’s largest recorded intracontinental earthquakes and one of four great earthquakes that occurred in the region during the twentieth century. The 375 km long surface rupture of the left‐lateral, strike‐slip, N095°E‐trending Bulnay fault associated with this earthquake is remarkable for its pronounced expression across the landscape and for the size of features produced by previous earthquakes. Our field observations suggest that in many areas the width and geometry of the rupture zone is the result of repeated earthquakes; however, in those areas where it is possible to determine that the geomorphic features are the result of the 1905 surface rupture alone, the size of the features produced by this single earthquake are singular in comparison to most other historical strike‐slip surface ruptures worldwide. Along the 80 km stretch, between 97.18° E and 98.33° E, the fault zone is characterized by several meters width and the mean left‐lateral 1905 offset is 8.9±0.6  m with two measured cumulative offsets that are twice the 1905 slip. These observations suggest that the displacement produced during the penultimate event was similar to the 1905 slip. Morphotectonic analyses carried out at three sites along the eastern part of the Bulnay fault allow us to estimate a mean horizontal slip rate of 3.1±1.7  mm/yr over the Late Pleistocene–Holocene period. In parallel, paleoseismological investigations show evidence for two earthquakes prior to the 1905 event, with recurrence intervals of ∼2700–4000  yrs.
ISSN: 0037-1106

hal-01179837
https://hal.archives-ouvertes.fr/hal-01179837
https://hal.archives-ouvertes.fr/hal-01179837v2/document
https://hal.archives-ouvertes.fr/hal-01179837/file/rizza2015.pdf
DOI : 10.1785/0120140119

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
We present an improvement of the maximum intersection (MAXI) method in which absolute earthquake location is defined by the maximum intersection number of hyperbolic equal differential time (EDT) volumes (one EDT volume being described as all grid nodes satisfying the arrival‐time differences between two stations, ± a tolerance value known as TERR). This 3D technique is well adapted to a strongly heterogeneous environment, avoids the depth versus origin‐time trade‐off (even using P arrivals alone), and objectively filters possible erroneous arrival times. Improvements consist of introducing an iterative multiscale approach on the TERR parameter and conducting a hierarchy of grid discretization to refine the preliminary solution (multigrid algorithm). The outlier cleaning process is strengthened by conducting statistical analyses based on the number of EDT volume intersections per station, rather than on travel‐time residues. Processing two series of synthetic arrival times computed in the 3D seismological configuration of the southernmost Ryukyu subduction zone, offshore Taiwan, allows us to (1) confirm MAXI robustness, even when arrival times are highly disturbed or azimuthal coverage largely reduced, and (2) show that MAXI, by limiting trade‐offs between origin time and depth and between epicentral position and depth, is less affected by a wrong velocity model than a technique that minimizes travel‐time residues. To conclude, we apply the MAXI method to locate earthquakes recorded by the combined Central Weather Bureau of Taiwan (CWB) and the Japanese Meteorological Agency (JMA) networks (1991-2008) within a georealistic a priori 3D P‐velocity model. Hypocenter determinations are selected based on MAXI confidence factors, and earthquake clustering along well‐known tectonic features witnesses hypocenter determination accuracy.
ISSN: 0037-1106

hal-00725227
https://hal.archives-ouvertes.fr/hal-00725227
DOI : 10.1785/0120100311

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
Abstract The continuous record of large surface-rupturing earthquakes along the Dead Sea fault brings unprecedented insights for paleoseismic and archaeoseismic research. In most recent studies, paleoseismic trenching documents the late Holocene faulting activity, while tectonic geomorphology addresses the long-term behavior (>10 ka), with a tendency to smooth the effect of individual earthquake rupture events (Mw >7). Here, we combine historical, archaeological, and paleoseismic investigations to build a consolidated catalog of destructive surface-rupturing earthquakes for the last 14 ka along the left-lateral Jordan Valley fault segment. The 120- km-long fault segment limited to the north and the south by major pull-apart basins (the Hula and the Dead Sea, respectively) is mapped in detail and shows five subsegments with narrow stepovers (width < 3 km). We conducted quantitative geomorphology along the fault, measured more than 20 offset drainages, excavated four trenches at two sites, and investigated archaeological sites with seismic damage in the Jordan Valley. Our results in paleoseismic trenching with 28 radiocarbon datings and the archaeoseismology at Tell Saydiyeh, supplemented with a rich historical seismic record, document 12 surface-rupturing events along the fault segment with a mean interval of ∼1160 yr and an average 5 mm=yr slip rate for the last 25 ka. The most complete part of the catalog indicates recurrence intervals that vary from 280 yr to 1500 yr, with a median value of 790 yr, and suggests an episodic behavior for the Jordan Valley fault. Our study allows a better constraint of the seismic cycle and related short-term variations (late Holocene) versus long-term behavior (Holocene and late Pleistocene) of a major continental transform fault.
ISSN: 0037-1106

hal-00747401
https://hal.archives-ouvertes.fr/hal-00747401
DOI : 10.1785/0120100097

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : Shear-wave splitting measurements are widely used to analyze orientations of anisotropy. We compare two different shear-wave splitting techniques, which are generally assumed to give similar results. Using a synthetic test, which covers the whole backazimuthal range, we find characteristic differences, however, in fast-axis and delay-time estimates near Null directions between the rotation correlation and the minimum energy method. We show how this difference can be used to identify Null measurements and to determine the quality of the result. This technique is then applied to teleseismic events recorded at station LVZ in northern Scandinavia, for which our method constrains the fast-axis azimuth to be 15° and the delay time 1.1 sec.
ISSN: 0037-1106

hal-00404493
https://hal.archives-ouvertes.fr/hal-00404493
DOI : 10.1785/0120060190

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
The objective of this paper is to provide a better understanding of the relationship between the microseismicity, active tectonics, and crustal structures in the southwest Yukon Territory, Canada, in order to improve seismic‐hazard assessments in this region. We utilize data from a new dense seismic array that was deployed in the southwest Yukon in the summer of 2010. Data from the new seismic array significantly improve the magnitude completeness level in the region from ML 3.0 to 1.0. We analyze 980 events ranging in magnitudes from ML 0.2 to 4.7, at depths from 0 to 35 km. Relocation analysis using the progressive multiple event location shows that seismicity is concentrated in four main areas: (1) Yakutat block northern boundary-Fairweather fault, (2) Duke River fault, (3) southern Denali fault, and (4) a previously unrecognized northeast trending cluster that may highlight a previously unknown active fault. This cluster may contribute to stress and strain transfer inland from the Yakutat block region.
ISSN: 0037-1106

hal-00940935
https://hal.archives-ouvertes.fr/hal-00940935
DOI : 10.1785/0120130068

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
On 9 October 2007, an unusual sequence of earthquakes began in central British Columbia about 20 km west of the Nazko cone, the most recent (circa 7200 yr) volcanic center in the Anahim volcanic belt. Within 25 hr, eight earthquakes of magnitude 2.3-2.9 occurred in a region where no earthquakes had previously been recorded. During the next three weeks, more than 800 microearthquakes were located (and many more detected), most at a depth of 25-31 km and within a radius of about 5 km. After about two months, almost all activity ceased. The clear P- and S-wave arrivals indicated that these were high-frequency (volcanic-tectonic) earthquakes and the b value of 1.9 that we calculated is anomalous for crustal earthquakes but consistent with volcanic-related events. Analysis of receiver functions at a station immediately above the seismicity indicated a Moho near 30 km depth. Precise relocation of the seismicity using a double-difference method suggested a horizontal migration at the rate of about Graphic, with almost all events within the lowermost crust. Neither harmonic tremor nor long-period events were observed; however, some spasmodic bursts were recorded and determined to be colocated with the earthquake hypocenters. These observations are all very similar to a deep earthquake sequence recorded beneath Lake Tahoe, California, in 2003-2004. Based on these remarkable similarities, we interpret the Nazko sequence as an indication of an injection of magma into the lower crust beneath the Anahim volcanic belt. This magma injection fractures rock, producing high-frequency, volcanic-tectonic earthquakes and spasmodic bursts.
ISSN: 0037-1106

hal-00854504
https://hal.archives-ouvertes.fr/hal-00854504
DOI : 10.1785/0120100013