Éditeur(s) : HAL CCSD Society for Industrial and Applied Mathematics
Résumé : International audience
In this paper, we developed a theoretical study for nonconservative sytems in one dimension in order to construct numerical schemes for solving the Riemann problem. The nonconservative form of our model system required the use of a well-adapted theory in order to give us a sense of our problem. We chose a framework of generalized functions for solving a scalar hyperbolic equation with a discontinuous coefficient $sigma_t +usigma_x approx 0$, where u is the velocity solution of a Burgers's equation. After an explicit solution of the Riemann problem, we derived Godunov split schemes for computing an approximate solution of the Cauchy problem. We applied our study to a system modeling elasticity and a system modeling gas dynamics. Some stability properties of a scheme and its convergence to a generalized solution are proved for the first model. Numerical experiments confirmed this convergence result. For the second model, calculations of flows containing weak-to-moderate shocks showed that conservation errors are reduced when the mesh is refined but were not entirely eliminated.
ISSN: 0036-1429

hal-00770266
https://hal.univ-antilles.fr/hal-00770266
DOI : 10.1137/S0036142900378637

Éditeur(s) : HAL CCSD
Résumé : International audience
The hierarchical architecture of biopolymers induces remarkable behaviour. Wood mechanical properties mainly originate from the organization of wood tissue and interactions of cellwall components. The respective contribution on components inside those networks occurs at nanometric scale and still challenging to investigate in-situ. X-ray scattering techniques are now used as a routine technique to investigate internal organization of material components. For that purpose large-scale synchrotron facilities like ESRF offer leading X-ray sources capabilities (large energy range, high brilliance, high intensity, dedicated setups). ESRF's ID13 beamline serves high spacial resolution scanning setups to expertise in elastic scattering of monochromatic X-rays. Since analytical description of the scattering signal of cellulose have been well describe wood material benefit wide range of exposure conditions and sample environment. During this conference, we will present our achievements based on transverse sections of poplar specimens exposed to micrometric beam (1.2 μm side, 12.6 keV energy) to reveal crystalline cellulose distribution within wood tissue and to nanometric beam (100 nm side, 12 6 keV energy) to map the evolution of cellulose orientation within double cell wall over combined Wide-Angle (WAXS) and Small-Angle (SAXS) X-ray Scattering configuration. Within those setups hygrometric sample environment and stretching solicitations will be approached based on-going developments.
COST FP0802 Workshop 'Micro Characterisation of Wood Material'
Edimbourg, United Kingdom

hal-01113298
https://hal.archives-ouvertes.fr/hal-01113298

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Grain deviations and high extractives content are common features of many tropical woods. We aimed at clarifying their respective impact on vibrational properties, referring to African Padauk (Pterocarpus soyauxii Taub.), a species selected for its interlocked grain, high extractives content, and uses in xylophones. Specimens were cut parallel to the trunk axis (L), and local variations in grain angle (GA), microfibril angle (MFA), specific Young's modulus (E'L/ρ, where r stands for specific gravity) and damping coefficient (tanδL), were measured. GA dependence was analyzed by a mechanical model which allowed to identify the specific Young's modulus (E'3/ρ) and shear modulus (G'/ρ) along the grain (3), as well as their corresponding damping coefficients (tanδ3, tanδG). This analysis was done for native and then for extracted wood. Interlocked grain resulted in 0-25° GA and in variations of a factor 2 in E'L/ρ and tanδL. Along the grain, Padauk wood was characterized, as compared to typical hardwoods, by a somewhat lower E'3/ρ and elastic anisotropy (E'/G'), due to a wide microfibril angle plus a small weight effect of extracts; and a very low tanδ3 and moderate damping anisotropy (tanδG/tanδ3). Extraction affected mechanical parameters in the order: tanδ3 ≈ tanδG > G'/ρ >> E'3/ρ. That is, extractives' effects were nearly isotropic on damping but clearly anisotropic on storage moduli.
ISSN: 0043-7719

hal-00544382
https://hal.archives-ouvertes.fr/hal-00544382
https://hal.archives-ouvertes.fr/hal-00544382/document
https://hal.archives-ouvertes.fr/hal-00544382/file/Identification_anisotropic_vibrational_properties_Bremaud_al.pdf
DOI : 10.1007/s00226-010-0348-0

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Peel splitting is a major physiological disorder affecting post-harvest banana quality. This phenomenon occurs only 3-6 days after ripening induction in specific cultivars such as cv. 925 when stored in saturating humidity conditions. In these conditions, Cavendish cultivars (Grande Naine, cv. GN) are not susceptible to splitting. Cvs. 925 and GN were thus investigated to detect possible determinants associated with splitting. Splitting intensity was tentatively found to be associated with an inverse water flux at high relative humidity (RH) through an osmotic peel to pulp water flux resulting from the higher sugar content in the pulp than in the peel. Rheological properties were measured, and although the peel resistance and elasticity in cv. 925 were surprisingly higher than in cv. GN, saturating humidity conditions (100 % RH) substantially reduced the peel resistance. However, the peel epicuticular wax in cv. 925 was clearly thinner than that in cv. GN, thus leading to limitation of peel hydration in cv. GN. Peel splitting in cv. 925 was also associated with a boost in respiration, an increase in oxidative stress markers (H2O2), resulting in an increase in cellular damage markers (MDA, PEL). Overall, our results suggest that peel splitting at high RH in cv. 925 is related to fast decrease peel water content and the induction of high oxidative stress damage.
ISSN: 0137-5881

hal-01545907
https://hal.archives-ouvertes.fr/hal-01545907
DOI : 10.1007/s11738-016-2253-0

Éditeur(s) : HAL CCSD
Résumé : The forests of French Guiana occupy a central part of the region’s potential resource base, but as yet remain almost completely unexploited. This stems from the forestry industry struggling to valorize wood stocks of a high diversity with an extremely heterogeneous distribution. Indeed, identifying essences for future propagation is an issue of both environmental and socio-economic importance for the region. Bagassa guianensis Aubl. and Cordia alliodora (Ruiz & Pav.) Oken. go against conventional models, in that they display the life history characteristics of rapid growth and wood of high quality, and thus are species of high potential for future plantations. Firstly, our study of growth characteristics reveals a defined strategy half way between long-lived species and pioneer species. It is the variability of basic density of wood which is a key trait allowing for such a development, favoring rapid growth in initial years whilst allowing for tree longevity. Secondly, the analysis of a range of wood properties (shrinkage, modulus of elasticity, durability) in relation to tree growth confirms the technologic quality of the two species. It also enables the emergence of new results like the effect of extractives on wood stability, the control of growth as a result of basic density variation, the evolution of leaf traits throughout tree development or the improvement of trunk maintenance thanks to interlocked grain. The knowledge gained in relation to the developmental traits of these two species, and to the quality of their wood allows for the elaboration of plantation projects and what will be required for their success. The results of this study can orientate future studies on novel species for commercialization in French Guiana.
La ressource forestière en Guyane occupe une place maîtresse au sein de la région et est encore majoritairement préservée, mais la filière bois parvient difficilement à valoriser la biodiversité locale en raison de l’hétérogénéité de la ressource. Identifier les essences à planter demain représente aujourd’hui un enjeu à la fois environnemental, économique et social pour la Guyane. Bagassa guianensis Aubl. et Cordia alliodora (Ruiz & Pav.) Oken. vont à l’encontre des modèles usuels en associant vitesse de croissance et qualité du bois et sont identifiées comme prometteuses pour la plantation. Dans un premier temps, l’étude de la dynamique de croissance des deux espèces révèle un modèle écologique singulier, à la fois pionnières et longévives. La variabilité de l’infradensité dans l’arbre est l’élément clé qui permet un tel développement, favorisant une croissance rapide dans les premières années tout en assurant la longévité de l’individu. Dans une seconde partie, l’analyse d’un large panel de propriétés du bois (retrait, module, durabilité) en lien avec le développement de l’arbre confirme les qualités technologiques des deux espèces et permet l’émergence de résultats novateurs tels que le rôle des extractibles sur le retrait, le contrôle de la croissance grâce aux variations d’infradensité, l’évolution des traits foliaires au cours de l’ontogénie ou encore la mise en place de contrefil dans l’arbre pour assurer son maintien. La connaissance acquise vis-à-vis du mode de développement de ces deux espèces et des facteurs influençant la qualité de leur bois permet aujourd’hui de définir avec plus de précision le cadre d’un projet de plantation et les conditions de son succès. Les résultats de cette étude permettent finalement d’orienter la recherche de nouvelles espèces d’avenir pour la plantation en Guyane.
https://tel.archives-ouvertes.fr/tel-01430243

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2015YANE0002
tel-01430243
https://tel.archives-ouvertes.fr/tel-01430243
https://tel.archives-ouvertes.fr/tel-01430243/document
https://tel.archives-ouvertes.fr/tel-01430243/file/julie-bossu.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In order to estimate the seismic anisotropy of subducted crust, polycrystalline samples of KA1Si(3)O(8) K-lingunite (25% of the total subducted transformed sediments), have been synthesized and deformed under the temperature and pressure conditions of the subducted slabs. Transmission electron microscopy (TEM) characterizations of the recovered samples reveal that the microstructures are clearly dominated by [001] glide involving screw dislocations. For this reason, only {100} could be identified as glide planes, the question of [001] slip on {110} remains open. Few 1/2 < 111 > dislocations were observed gliding on {110} planes, which implies that 1/2 < 111 > {110} is a harder slip system than those involving [001] slip. The occurrence of sub-grain boundaries suggests that diffusion and climb might be active under these conditions.;To assess the texture of polycrystalline K-lingunite, the crystal preferred orientations (CP05) were calculated using visco-plastic self-consistent (VPSC) polycrystalline plasticity model in simple shear using the slip systems identified by TEM. Finally, the seismic properties of K-lingunite aggregates were calculated from the CPO and single crystal elasticity tensor. K-lingunite is predicted to have a high seismic anisotropy, which could combine constructively with one of the stishovite (same proportion as K-lingunite at the transition zone depth ranges).
ISSN: 0031-9201

hal-00534050
https://hal.archives-ouvertes.fr/hal-00534050
DOI : 10.1016/j.pepi.2010.06.013