Éditeur(s) : HAL CCSD
Résumé : International audience
Metamorphic soles correspond to m to 500 m thick highly strained metamorphic rock units found beneath myloniticbanded peridotites at the base of large-scale ophiolites, as exemplified in Oman. Metamorphic soles aremainly composed of metabasalts deriving from the downgoing oceanic lithosphere and metamorphosed up togranulite-facies conditions by heat transfer from the mantle wedge. Pressure–temperature peak conditions areusually estimated at 1.00.2 GPa and 800100ºC. The absence of HP–LT metamorphism overprint implies thatmetamorphic soles have been formed and exhumed during subduction infancy. In this view, metamorphic soleswere strongly deformed during their accretion to the mantle wedge (corresponding, now, to the base of the ophiolite).Therefore, metamorphic soles and banded peridotites are direct witnesses of the dynamics of early subductionzones, in terms of thermal structure, fluid migration and rheology evolution across the nascent slab interface.Based on fieldwork and EBSD analyses, we present a detailed (micro–) structural study performed on samplescoming from the Sumeini window, the better-preserved cross-section of the metamorphic sole of Oman. Largedifferences are found in the deformation (CPO, grain size, aspect ratio) of clinopyroxene, amphibole and plagioclase,related to mineralogical changes linked with the distance to the peridotite contact (e.g., hardening due to theappearance of garnet and clinopyroxene).To model the incipient slab interface in laboratory, we carried out 5 hydrostatic annealing and simple-shear experimentson Griggs solid-medium apparatus. Deformation experiments were conducted at axial strain rates of 10-6s-1. Fine-grained amphibolite was synthetized by adding 1 wt.% water to a (Mid-Ocean Ridge) basalt powder asa proxy for the metamorphic sole (amphibole + plagioclase + clinopyroxene garnet assemblage). To synthetizegarnet, 2 experiments were carried out in hydrostatic conditions and with deformation at 800C with confiningpressure of 2 GPa. Another simple-shear experiment has been carried out at 800C and 1 GPa with fined-grainednatural garnet. With the aim of mimicking the early slab interface (between the metamorphic sole and bandedperidotites at the base of the ophiolite), 2 simple-shear deformation experiments with 2 layers have been carriedout at 800C and confining pressure of 1 GPa. The bottom layer was made of hydrated basalt powder and the toplayer was made of olivine.Fined-grained garnet-free amphibolite is significantly weaker than dunite but the appearance of harder mineralsin the amphibolite (garnet and clinopyroxene) has major implications on its rheological evolution. These resultsallow liking field observations of strain localization at the interface to the metamorphic sole formation
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01309394
https://hal-insu.archives-ouvertes.fr/insu-01309394

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
New evolutionary models for the Pyrenean orogeny must consider feedbacks between the Mid-Cretaceous hyperextension postulated recently and the Pyrenean inversion. We present a new crustal section of the Pyrenees through the Jaca Basin, the western Axial Zone and the Chaînons Béarnais, which allows identifying the ancient continental margins of the Iberian and European plates and a suture. A sequential restoration allows a reassessment of the style of convergence through time. Restoration leads to a progressively thinned crust in narrow continental margins separated by a domain of exhumed mantle peridotite and overlain by a detached sedimentary lid. Early convergence during the Late Cretaceous and the Earliest Paleogene was accommodated by subduction of the peridotite domain. This was followed in the Eocene by initial collision involving overriding of the Iberian margin onto the European margin along the deep ramp of the North-Pyrenean Frontal thrust, which defines the suture. Subsequent full collision and strong relief generation from the late-Mid or Late Eocene to the Early Miocene were associated with thrust accretion of the Iberian plate, underlain by wedging and northward subduction of the decoupled Iberian lower crust.
ISSN: 1631-0713

insu-01291223
https://hal-insu.archives-ouvertes.fr/insu-01291223
https://hal-insu.archives-ouvertes.fr/insu-01291223/document
https://hal-insu.archives-ouvertes.fr/insu-01291223/file/The%20crustal%20evolution%20of%20the%20west-central%20Pyrenees%20-%20postprint.pdf
DOI : 10.1016/j.crte.2015.10.010

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Yakutat-St. Elias collision in SE Alaska and adjacent Canada represents a prime example of present-day tectonics associated with an indentor corner. Its eastern syntaxis is marked by high exhumation, a sharp structural bend, and strain concentration at the transition from shortening to oblique transpression. Here we present GPS velocity and strain rate fields that cover the syntaxis, including 11 new stations in the core of the St. Elias Mountains. These data are corrected for transient deformation (glacial isostatic adjustment and postseismic and interseismic loading) to produce residual velocities and strain rates representative of long-term tectonics. The main features of these velocity and strain rate fields are a peak in strain rates (strain knot) in the syntaxis at the junction between the main fault systems and a rapid rotation from convergence-parallel to convergence-normal orientations of the velocities and shortening axes around the syntaxis, leading to shortening across the southern Denali Fault. These features are consistent with the strain and tectonic patterns expected near an indentor corner at the transition from shortening to transpression, with a combination of diffuse and localized deformation. The GPS velocities and strain rates show diffuse deformation around the syntaxis, from pure convergence-parallel shortening in the orogenic wedge to oblique extension that accommodates the strain rotation at the front of the syntaxis. This indentor-corner model also results in a near-zero strike-slip rate on the southern Denali Fault and shows no clear evidence for a throughgoing fault hypothesized to link the Fairweather and Totschunda Faults.
ISSN: 0148-0227

hal-01243510
https://hal.archives-ouvertes.fr/hal-01243510
DOI : 10.1002/2014JB011842

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
In the Pyrenees, the lherzolites nowhere occur as continuous units. Rather, they always outcrop as restricted bodies, never more than 3 km wide, scattered across Mesozoic sedimentary units along the North Pyrenean Fault. We report the results of a detailed analysis of the geological setting of the Lherz massif (central Pyrenees), the type-locality of lherzolites and one of the most studied occurrences of mantle rocks worldwide. The Lherz body is only 1.5 km long and belongs to a series of ultramafic bodies of restricted size (a few metres to some hundreds of metres), occurring within sedimentary formations composed mostly of carbonate breccias originating from the reworking of Mesozoic platform limestones and dolomites. The clastic formations also include numerous layers of polymictic breccias reworking lherzolitic clasts. These layers are found far from any lherzolitic body, implying that lherzolitic clasts cannot derive from the in situ fragmentation of an ultramafic body alone, but might also have been transported far away from their sources by sedimentary processes. A detailed analysis of the contacts between the Lherz ultramafic body and the surrounding limestones confirms that there is no fault contact and that sediments composed of ultramafic material have been emplaced into fissures within the brecciated carapace of the peridotites. These observations bear important constraints for the mode of emplacement of the lherzolite bodies. We infer that mantle exhumation may have occurred during Albian strike-slip deformation linked to the rotation of Iberia along the proto-North Pyrenean Fault.
ISSN: 0954-4879

hal-00412602
https://hal.archives-ouvertes.fr/hal-00412602

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Continental rifts and passive continental margins show fundamental along-axis segmentation patterns that have been attributed to one or a number of different processes: extensional fault geometry, variable stretching along strike, preexisting lithospheric compositional and structural heterogeneities, oblique rifting, and the presence or absence of eruptive volcanic centers. The length and width scales of the rift stage fault-bounded basin systems change during the late evolution of the new plate boundary, and the role of magmatism may increase as rifting progresses to continental rupture. Along obliquely spreading ridges, first-order mid-ocean ridge geometries originate during the synrift stage, indicating an intimate relationship between magma production and transform fault spacing and location. The Gulf of Aden rift is a young ocean basin in which the earliest synrift to breakup structures are well exposed onshore and covered by thin sediment layers offshore. This obliquely spreading rift is considered magma-poor and has several large-offset transforms that originated during late stage rifting and control the first-order axial segmentation of the spreading ridge. Widely spaced geophysical transects of passive margins that produce only isolated 2-D images of crust and uppermost mantle structure are inadequate for evaluation of competing rift evolution models. Using closely spaced new geophysical and geological observations from the Gulf of Aden we show that rift sectors between transforms have a large internal variability over short distances (∼10 km): the ocean-continent transition (OCT) evolves from a narrow magmatic transition to wider zones where continental mantle is probably exhumed. We suggest that this small-scale variability may be explained (1) by the distribution of volcanism and (2) by the along-strike differences in time-averaged extension rate of the oblique rift system. The volcanism may be associated with (1) the long-offset Alula-Fartak Fracture Zone, which may enhance magma production on its younger side, or (2) channeled flow from the Afar plume material along the newly formed OCT and the spreading ridge. Oblique extension and/or hot spot interactions may thereby have a significant control on the styles of rifting and continental breakup and on the evolution of many magma-poor margins.
ISSN: 1525-2027

hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866/document
https://hal.archives-ouvertes.fr/hal-00504866/file/G3-Leroy_al-2010.pdf
DOI : 10.1029/2009GC002963