Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The contourite depositional system (CDS) along the southwestern Iberian Margin (SIM), within the Gulf of Cadiz and offshore areas of western Portugal bear the unmistakable signal of Mediterranean Outflow Water (MOW) exiting the Strait of Gibraltar. This locality records key information concerning the effects of tectonic activity on margin sedimentation, the effects of MOW dynamics on Atlantic circulation, and how these factors may have influenced global climate. Over the last four decades, numerous studies have been conducted on the late Miocene, Pliocene and Quaternary sedimentary stacking pattern of Neogene basins along the SIM for both academic and resources exploration purposes. However, understanding of the region rests primarily on basic seismic stratigraphy calibrated with limited data from only a few exploration wells. The Integrated Ocean Drilling Program (IODP) Expedition 339 recently drilled five sites in the Gulf of Cadiz and two sites on the western Iberian margin. The integration of core and borehole data with other geophysical databases leads us to propose a new stratigraphic framework. Interpretation of IODP Exp. 339 data along with that from industry sources and onshore outcrop analysis helps refine our understanding of the SIM's sedimentary evolution.We identify significant changes in sedimentation style and dominant sedimentary processes, coupled with widespread depositional hiatuses along the SIM within the Cadiz, Sanlucar, Doñana, Algarve and Alentejo basins. Following the 4.5 Ma cessation of a previous phase of tectonic activity related to the Miocene–Pliocene boundary, tectonics continued to influence margin development, downslope sediment transport and CDS evolution. Sedimentary features indicate tectonic pulses of about 0.8–0.9 Ma duration with a pronounced overprint of ~ 2–2.5 Ma cycles. These more protracted cycles relate to the westward rollback of subducted lithosphere at the convergent Africa-Eurasia plate boundary as its previous NW–SE compressional regime shifted to a WNW–ESE direction. Two major compressional events affecting to the Neogene basins at 3.2–3 Ma and 2–2.3 Ma help constrain the three main stages of CDS evolution. The stages include: 1) the initial-drift stage (5.33–3.2 Ma) with a weak MOW, 2) a transitional-drift stage (3.2–2 Ma) and 3) a growth-drift stage (2 Ma-present time) with enhanced MOW circulation into the Atlantic and associated contourite development due to greater bottom-current velocity. Two minor Pleistocene discontinuities at 0.7–0.9 Ma and 0.3–0.6 Ma record the effects of renewed tectonic activity on basin evolution, appearing most prominently in the Doñana basin. Several discontinuities bounding major and minor units appear on seismic profiles. Quaternary records offer the clearest example of this, with major units of about 0.8–0.9 Ma and sub-units of 0.4–0.5 Ma. Sedimentation is controlled by a combination of tectonics, sediment supply, sea-level and climate. This research identifies time scales of tectonic controls on deep-marine sedimentation, specifically over periods of 2.5–> 0.4 Ma. Shorter-term climatic (orbital) mechanisms control sedimentation at time scales of ≤ 0.4 Ma. The role of bottom water circulation and associated processes in shaping the seafloor and controlling the sedimentary stacking pattern on continental margins has to be seriously reconsidered in future multidisciplinary studies. This is not only because of the common occurrence of sandy contourite deposits in deep water setting and their economic interest for hydrocarbon exploration, but principally because they archive the heartbeat of the interior Earth and therefore have important sedimentary and paleoceanographic implications.
ISSN: 0025-3227

hal-01356166
https://hal.archives-ouvertes.fr/hal-01356166
DOI : 10.1016/j.margeo.2015.09.013

Éditeur(s) : HAL CCSD Météo et Climat
Résumé : International audience
D'initiative française, le projet international HyMeX a pour objectif d'améliorer la compréhension du cycle de l'eau en Méditerranée, de sa variabilité, de l'échelle de l'événement météorologique aux échelles saisonnières et interannuelles, et de ses caractéristiques sur une décennie, dans un contexte de changement global. Le projet est motivé par le rôle déterminant des processus de mésoéchelle, couplés entre l'atmosphère, la mer et la terre, sur la variabilité du système climatique et sur le déclenchement d'événements hydrométéorologiques extrêmes (précipitations et inondations, vents forts et convection océanique, canicules et sécheresses). Le projet vise enfin à évaluer les conséquences de ces événements extrêmes sur la vulnérabilité sociale et économique de cette région et sa capacité d'adaptation.
ISSN: 0026-1181

hal-00828758
https://hal.archives-ouvertes.fr/hal-00828758
https://hal.archives-ouvertes.fr/hal-00828758/document
https://hal.archives-ouvertes.fr/hal-00828758/file/meteo_2013_80_23%20%281%29.pdf
DOI : 10.4267/2042/48792

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
Wadsleyites with various iron contents were synthesized at ~12-14 GPa and 1400 °C under oxidizing and hydrous conditions in coexistence with enstatite. The samples were studied using micro-X-ray absorption near edge structure (XANES) and micro-Mössbauer spectroscopy to determine the ferric iron contents in polyphasic samples and secondary ion mass spectrometry (SIMS) to determine the water concentrations. XANES and Mössbauer analyses show that ferric iron content increases with increasing total iron content, and reaches a maximum of ~30% Fe3+/Fetotal. Two XANES results were cross-checked by Mössbauer analysis and both methods are in reasonable agreement. The use of Fourier transform infrared spectroscopy reveals a new protonation scheme in wadsleyite, with a significant proportion of protons associated with the high-frequency band at 3611 cm−1 and a new band located at 3500 cm−1. The intensity of these two bands is higher for Fe3+-rich wadsleyite. SIMS analyses show that water contents in wadsleyite vary from 4500 to 9400 ppm H2O by weight. Pyroxene water contents range from 790 to 1600 ppm wt H2O. The concentration of water in both phases decreases with increasing iron content. The partition coefficient of water between wadsleyite and pyroxene varies between 5 and 9 and increases with increasing Fe-number of wadsleyite [i.e., XFe/(XFe + XMg) × 100 ratio]. The divalent cation concentrations (i.e., Mg2+ + Fe2+), the Si as well as the H content in wadsleyite decrease with increasing Fe3+ content, indicating an incorporation mechanism via substitution into the metal (Me = Mg2+ and Fe2+) and Si sites with a ratio of 5/3 for (Fe3++H+):Me and of 5/1 for (Fe3++H+):Si, similarly as in the dry system. Thus, coupled substitution of Fe3+ and H+ does not affect the incorporation mechanism of Fe3+, but does affect the location of H+, which is partly incorporated at tetrahedral edges forming [FeSi′-(OH)o*]X neutral defects substituting for Si. In this model 25% of the ferric iron occupies the tetrahedral sites.
ISSN: 0003-004X

hal-00758071
https://hal.archives-ouvertes.fr/hal-00758071
DOI : 10.2138/am.2012.3869

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The initiation and subsequent evolution of intra-plate orogens, resulting from continental plate interior deformation due to transmission of stresses over large distances from the active plate boundaries, is controlled by lateral and vertical strength contrasts in the lithosphere. We present lithospheric-scale analogue models combining 1) lateral strength variations in the continental lithosphere, and 2) different vertical rheological stratifications. The experimental continental lithosphere has a four-layer brittle–ductile rheological stratification. Lateral heterogeneity is implemented in all models by increased crustal strength in a central narrow block. The main investigated parameters are strain rate and strength of the lithospheric mantle, both playing an important role in crust–mantle coupling. The experiments show that the presence of a strong crustal domain is effective in localizing deformation along its boundaries. After deformation is localized, the evolution of the orogenic system is governed by the mechanical properties of the lithosphere such that the final geometry of the intra-plate mountain depends on the interplay between crust–mantle coupling and folding versus fracturing of the lithospheric mantle. Underthrusting is the main deformation mode in case of high convergence velocity and/or thick brittle mantle with a final asymmetric architecture of the deep lithosphere. In contrast, lithospheric folding is dominant in case of low convergence velocity and low strength brittle mantle, leading to the development of a symmetric lithospheric root. The presented analogue modelling results provide novel insights for 1) strain localization and 2) the development of the asymmetric architecture of the Pyrenees.
ISSN: 0012-821X

hal-01243577
https://hal.archives-ouvertes.fr/hal-01243577
DOI : 10.1016/j.epsl.2015.05.022

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study is based on a set of lavas and crosscutting dikes collected by dives along detailed vertical transects on the northern flank of the western part of the Blanco Transform Fault, Northeast Pacific. The studied area consists of a small basin, the Western Blanco Depression (WBD), extending from the southern end of the Juan de Fuca ridge to a pseudofault trace 60 km eastward. The Northern Scarp of the WBD comprises a volcanic unit overlying a sheeted-dike complex. Major and trace element data, coupled with Sr–Nd isotope ratios, reveal a two-component mantle source, composed by an isotopically depleted matrix variably veined by more enriched material. One chemical group (NS2), indistinguishable from the other Northern Scarp samples on the basis of trace element data, has an unusually depleted isotopic composition typical of a nearly pure mantle end-member. Some cogenetic samples of the Northern Scarp have been used to constrain the differentiation modalities. Anorthite and MgO content profiles in plagioclase xenocrysts and phenocrysts reveal (i) the existence of H2O-bearing evolved melts in the mushy zones and (ii) the occurrence of mixing process between these melts and anhydrous mafic liquids. The hydration is supported by other petrographic features such as high magmatic fO2 values, calculated from Fe–Ti oxide pairs, and the presence of pyroxene inclusions in plagioclase phenocrysts. Mixing, consistent with the existence of Ni-rich ferrobasalts, is interpreted to be the consequence of the reservoir refilling by mafic liquids (Mg# = 70). These petrological and geochemical evidences are combined with the evolution of Mg# with depth to suggest a periodic open-system magma chamber evolution beneath the southern end of the Juan de Fuca ridge.
ISSN: 0024-4937

insu-00213426
https://hal-insu.archives-ouvertes.fr/insu-00213426
DOI : 10.1016/j.lithos.2007.06.009

Éditeur(s) : Université de Bretagne Occidentale
Résumé : Archaea are micro-organisms present in all ecosystems, but are majoritary present in extremophilic environments. Hyperthermophilic Archaea, as Pyrococcus abyssi, are permanently exposed at temperature which can increase the rate of spontaneous DNA damage. It is probable that hyperthermophilic Archaea possess efficient molecular mechanism to duplicate, maintain and stabilize their genomes. The aim of this project was to investigate the interaction network involved in the process of DNA replication and DNA repair. The methodological approach consists in the coupling of pull-down with mass spectrometry identification of interacting partners. A preliminary interaction network was identified that was composed of new proteins as well as unsuspected interactions between known components of DNA replication machinery. The main results consist in: (1) the nuclease Pab2263, which interacts with PCNA, is a novel player in DNA metabolism. (2) PCNA is likely part of a macrocomplex with the ubiquitary proteins Mre11 and Rad50 suggesting a role of this complex in the repair of double strand break in connection with a replication fork. (3) Fen1 and DNA primase interact physically and can collaborate in vitro to resolve intermediate step of the base excision repair pathway. These results enhance our understanding of DNA repair process in Archaea.
Les Archaea sont des micro-organismes rencontrés dans tous les écosystèmes, mais qui apparaissent comme majoritaires dans les environnements dits extrêmes. Les archaea hyperthermophiles, comme Pyrococcus abyssi sont en permanence exposées à des températures qui peuvent augmenter le taux de dommages de l'ADN, pourtant, le taux de mutations spontanés chez ces micro-organismes est similaire à celui des espèces modèles mésophiles. Il est ainsi probable que les hyperthermophiles possèdent des systèmes particulièrement efficaces pour dupliquer, maintenir et stabiliser leur génome. L'objectif de ce projet était d'explorer le réseau d'interaction impliqué dans les processus de réplication et de réparation de l'ADN. L'approche méthodologique mise en oeuvre a consisté à coupler la capture de partenaires d'interaction par pull-down avec leur identification par spectrométrie de masse. J'ai pu ainsi mettre en évidence, au sein l'extrait cellulaire de P. abyssi, un réseau préliminaire reliant des protéines de la maintenance génomique. Nous avons non seulement mis en évidence de nouvelles protéines impliquées probablement dans des mécanismes de réparation, mais également des nouvelles interactions non suspectées entre des composants déjà caractérisés. Les principaux résultats sont les suivants : (1) La nucléase Pab2263, partenaire du PCNA, est un nouvel acteur du métabolisme de l'ADN. (2) Le PCNA forme un macrocomplexe avec les protéines ubiquitaires Mre11 et Rad50 suggérant un rôle de ce complexe dans la réparation des cassures double brin de l'ADN lors de la réplication. (3) Les protéines Fen1 et l'ADN primase interagissent physiquement et peuvent collaborer in vitro pour résoudre une étape intermédiaire de la voie de réparation par excision de base. Ces résultats enrichissent notre compréhension des processus de réparation de l'ADN chez les archées.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2008/these-3722.pdf
http://archimer.ifremer.fr/doc/00000/3722/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition zone at the downdip end of seismic coupling along subduction interfaces is often the site of megathrust earthquake nucleation and concentrated postseismic afterslip, as well as the focus site of episodic tremor and slip features. Exhumed remnants of the former Alpine subduction zone found in the Swiss Alps allow analyzing fluid and deformation processes near the transition zone region (30–40 km paleodepth). The Dent Blanche Thrust (DBT) is a lower blueschist-facies shear zone interpreted as a fossilized subduction interface where granitic mylonites overlie a metamorphosed accretionary wedge. We report field observations from the DBT region where multiple, several tens of meters thick foliated cataclastic networks are interlayered within the basal DBT mylonites. Petrological results and microstructural observations indicate that the various cataclasis events took place at near-peak metamorphic conditions (400–500°C, 1.1–1.3 GPa) during subduction of the Tethyan seafloor in Eocene times (42–48 Ma). Some of these networks exhibit mutual crosscutting relationships between mylonites, foliated cataclasites, and vein systems indicating mutual overprinting between brittle deformation and ductile creep. Whole-rock chemical compositions, in situ 40Ar-39Ar age data of recrystallized phengite, and Sr isotopic signatures reveal that DBT rocks also underwent multiple hydrofracturing and metasomatic events via the infiltration of fluids mainly derived from the oceanic metasediments underneath the DBT. From the rock fabrics, we infer strain rate fluctuations of several orders of magnitude beyond subduction strain rates (∼10−12 s−1) accompanied by fluctuation of supralithostatic and quasi-lithostatic fluid pressures (1 ≥ λ > 0.95). DBT brittle-plastic deformation switches highlight the diversity of deformation processes and fluid-rock interactions in the transition zone region of the subduction interface.
ISSN: 1525-2027

hal-01243526
https://hal.archives-ouvertes.fr/hal-01243526
DOI : 10.1002/2015GC005776

Éditeur(s) : HAL CCSD
Résumé : International audience
Two opposing visions of the Aegean backarc tectonics implicitly contain contrasting images of the rheological behaviour of the lihosphere, supported by different sets of observations. The propagation of the NAF and extension in the Corinth Rift suggest a strongly localising rheology whereas the formation of MCC in the Cyclades and the Rhodope suggests instead a more viscous behaviour. This paradox was the seminal question addressed by the ANR-EGEO programme (2007-2010) that leads to the following conclusions: (1) The exhumation of the Cycladic MCC's is accommodated by the N-dipping North Cycladic Detachment System (NCDS) that partly reworks the Vardar suture and at the base by a series of thrusts, including the basal contact of the Cycladic Blueschists (CBS) over the Cycladic Basement (CB). The activity of LANF is due to the reactivation of pre-existing discontinuities such as thrusts or earlier detachments and much less to the interaction with granitic plutons. (2) Exhumation in the Cyclades has proceeded in two stages: (a) Eocene syn-orogenic exhumation within the subduction lower/upperplate interface while the post-orogenic Rhodope MCC formed further north, (b) Oligo-Miocene post-orogenic extension in an MCC mode coeval with syn-orogenic exhumation in Crete and the Peloponnese. (3) Both stages were associated with slab retreat, as early as the Eocene with an acceleration at 30-35 Ma. (4) The localisation of the presently active steeply-dipping normal faults on the southern margin of the Corinth Rift may have been preceded by a partial reworking of thrusts and syn-orogenic detachments by shallow-dipping decollements. (5) The localisation of the NAF in the Marmara Sea region and the Northern Aegean Sea is now accurately dated between 5.3 and 5 Ma Ma using the erosion and deposition surfaces that mark the Messinian salinity Crisis and nannofossils ages. (6) The formation of MCCs in the Cyclades resulted in the draining of the low viscosity lower crust from the northern Aegean Sea and led to an easier coupling between upper mantle and upper crust, easing the localisation and propagation of the NAF. (7) A comparison between crustal and mantle finite strain suggests that mantle flow due to slab retreat controls the stretching of the crust. Our model involves progressive slab retreat and mantle flow below the overriding plate inducing the observed succession of tectonic episodes with a progressive localisation of extension due to several slab tearing events. There is no paradox in the tectonic history and rheological behaviour of the Aegean lithosphere but an evolution of the kinematic boundary conditions due to slab deformation at depth.
American Geophysical Union
San Francisco, United States

insu-00860518
https://hal-insu.archives-ouvertes.fr/insu-00860518
BIBCODE : 2010AGUFM.T13G..04J

Éditeur(s) : HAL CCSD
Résumé : International audience
We present a model of the spinal cord in controlling one degree-of-freedom arm movements. The model includes both neural and musculoskeletal functions in an integrated framework. The model has been implemented by an artificial neural network coupled with a computational model of muscle publicly available. The experimental results show that the model is able to regulate the position of the arm and to mediate reflex actions by integrating commands from CNS and signals from proprioceptors.
17th Biennial Conference of the International Graphonomics Society
Pointe-à-Pitre, Guadeloupe

hal-01165882
https://hal.univ-antilles.fr/hal-01165882
https://hal.univ-antilles.fr/hal-01165882/document
https://hal.univ-antilles.fr/hal-01165882/file/IGS_2015_submission_17.pdf

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Dehydration reactions result in minerals’ replacement and a transient fluid-filled porosity. These reactions involve interface-coupled dissolution–precipitation and might therefore lead to fixed crystallographic orientation relations between reactant (protolith) and product phases (i.e. topotaxy). We investigate these two phenomena in the dehydration of a foliated antigorite (atg) serpentinite by comparing the crystallographic preferred orientation (CPO) developed by olivine (ol), orthopyroxene (opx) and chlorite (chl) during high-pressure antigorite and chlorite dehydration in piston-cylinder experiments and in natural samples recording the dehydration of antigorite (Cerro del Almirez, Betic Cordillera, Spain). Experiments were performed under undrained conditions resulting in fluid-filled porosity and in strong CPO of the prograde minerals, controlled by the pre-existing antigorite CPO in the reactant foliated serpentinite. The orientation of a ol,opx and c∗chl is parallel to c∗atg from the protolith. The Cerro del Almirez samples show similar, locally well-developed topotactic relations between orthopyroxene, chlorite and antigorite, but the product CPOs are weaker and more complex at the thin section scale. In contrast to the experiments, olivine from natural samples shows a weak correlation between b ol and the former c∗atg. We relate the strengthening of local topotactic relations and the weakening of the inherited CPO at a larger scale in natural samples to compaction and associated fluid migration. Microstructural features that might be related to compaction in the natural samples include: (1) smooth bending of the former foliation, (2) gradual crystallographic misorientation (up to 16°) of prismatic orthopyroxene due to buckling by dislocation creep, (3) inversion of enstatite to low clinoenstatite (P21/c) along lamellae and (4) brittle fracturing of prismatic orthopyroxene enclosed by plastically deformed chlorite. The coexistence of orthopyroxene buckling and clinoenstatite lamellae enables estimating the local strain rates and shear stresses generated during compaction. An lower bound for the strain rates in the order of 10−12 to 10−13 s−1 and shear stresses of 60–70 MPa are estimated based on creep data. Lower shear stresses (20–40 MPa) are retrieved using a theoretical approach. These data point to slow compaction (and fluid extraction) in nature if the system is not perturbed by external forces, with rates only marginally higher than the viscoplastic deformation of the solid matrix.
ISSN: 0010-7999

hal-01174158
https://hal.archives-ouvertes.fr/hal-01174158
DOI : 10.1007/s00410-015-1129-4

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The impact of stratospheric ozone on the tropospheric general circulation of theSouthern Hemisphere (SH) is examined with a set of chemistry‐climate models participatingin the Stratospheric Processes and their Role in Climate (SPARC)/Chemistry‐ClimateModel Validation project phase 2 (CCMVal‐2). Model integrations of both the past andfuture climates reveal the crucial role of stratospheric ozone in driving SH circulationchange: stronger ozone depletion in late spring generally leads to greater polewarddisplacement and intensification of the tropospheric midlatitude jet, and greater expansion ofthe SH Hadley cell in the summer. These circulation changes are systematic as polewarddisplacement of the jet is typically accompanied by intensification of the jet and expansion ofthe Hadley cell. Overall results are compared with coupled models participating in theIntergovernmental Panel on Climate Change Fourth Assessment Report (IPCC AR4), andpossible mechanisms are discussed. While the tropospheric circulation response appearsquasi‐linearly related to stratospheric ozone changes, the quantitative response to a givenforcing varies considerably from one model to another. This scatter partly results fromdifferences in model climatology. It is shown that poleward intensification of the westerly jetis generally stronger in models whose climatological jet is biased toward lower latitudes.This result is discussed in the context of quasi‐geostrophic zonal mean dynamics.
ISSN: 2169-897X

hal-00337060
https://hal.archives-ouvertes.fr/hal-00337060
https://hal.archives-ouvertes.fr/hal-00337060/document
https://hal.archives-ouvertes.fr/hal-00337060/file/Bock_et_al-2008-Journalsur Geophysical_Research__Solid_Earth_%281978-2012%29.pdf
DOI : 10.1029/2008JD010327

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Several recent studies have documented that reactions between melt and crystal mush in primitive gabbroic rocks (via reactive porous flow) have an important control in the formation of the lower oceanic crust and the evolution of MORBs. In this context, olivine-rich rocks can form either by fractional crystallization of primitive melts or by open system reactive percolation of pre-existing (possibly mantle-derived) olivine matrix. To address this question, we performed in-situ trace element analyses (by LA-ICP-MS) of olivine from the Erro-Tobbio ophiolite Unit (Ligurian Alps), where mantle peridotites show gradational contacts with an hectometer-scale body of troctolites and plagioclase wehrlites, and both are cut by later decameter-wide lenses and dykes of olivine gabbros. Previous studies inferred that troctolites and olivine gabbros represent variably differentiated crystallization products from primitive MORB-type melts. Olivines in the three rock types (mantle peridotites, troctolites, olivine gabbros) exhibit distinct geochemical signature and well-defined elemental correlations. As expected, compatible elements (e.g. Ni) show the highest concentrations in peridotites (2580–2730 ppm), intermediate in troctolites (2050–2230 ppm) and lowest in gabbros (1355–1420 ppm), whereas moderate incompatible elements (e.g. Mn, Zn) show the opposite behaviour. By contrast, highly incompatible elements like Zr, Hf, Ti, HREE are variably enriched in olivines of troctolites, and the enrichment in absolute concentrations is coupled to development of significant HFSE/REE fractionation (ZrN/NdN up to 80). AFC modelling shows that such large ZrN/NdN ratios in olivines are consistent with a process of olivine assimilation and plagioclase crystallization at decreasing melt mass, in agreement with textural observations. In-situ trace element geochemistry of olivine, combined with microstructural investigations, thus appears a powerful tool to investigate reactive percolation and the origin of olivine-rich rocks in the lower oceanic crust.
ISSN: 0016-7037

hal-01419938
https://hal.archives-ouvertes.fr/hal-01419938
DOI : 10.1016/j.gca.2016.06.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper provides a synthesis of current data and interpretations on the crustal structure of the Pyrenean-Cantabrian orogenic belt, and presents new tectonic models for representative transects. The Pyrenean orogeny lasted from Santonian (~84 Ma) to early Miocene times (~20 Ma), and consisted of a spatial and temporal succession of oceanic crust/exhumed mantle subduction, rift inversion and continental collision processes at the Iberia-Eurasia plate boundary. A good coverage by active-source (vertical-incidence and wide-angle reflection) and passive-source (receiver functions) seismic studies, coupled with surface data have led to a reasonable knowledge of the present-day crustal architecture of the Pyrenean-Cantabrian belt, although questions remain. Seismic imaging reveals a persistent structure, from the central Pyrenees to the central Cantabrian Mountains, consisting of a wedge of Eurasian lithosphere indented into the thicker Iberian plate, whose lower crust is detached and plunges northwards into the mantle. For the Pyrenees, a new scheme of relationships between the southern upper crustal thrust sheets and the Axial Zone is here proposed. For the Cantabrian belt, the depth reached by the N-dipping Iberian crust and the structure of the margin are also revised.The common occurrence of lherzolite bodies in the northern Pyrenees and the seismic velocity and potential field record of the Bay of Biscay indicate that the precursor of the Pyrenees was a hyperextended and strongly segmented rift system, where narrow domains of exhumed mantle separated the thinned Iberian and Eurasian continental margins since the Albian-Cenomanian. The exhumed mantle in the Pyrenean rift was largely covered by a Mesozoic sedimentary lid that had locally glided along detachments in Triassic evaporites. Continental margin collision in the Pyrenees was preceded by subduction of the exhumed mantle, accompanied by the pop-up thrust expulsion of the off-scraped sedimentary lid above. To the west, oceanic subduction of the Bay of Biscay under the North Iberian margin is supported by an upper plate thrust wedge, gravity and magnetic anomalies, and 3D inclined sub-crustal reflections. However, discrepancies remain for the location of continent-ocean transitions in the Bay of Biscay and for the extent of oceanic subduction. The plate-kinematic evolution during the Mesozoic, which involves issues as the timing and total amount of opening, as well as the role of strike-slip drift, is also under debate, discrepancies arising from first-order interpretations of the adjacent oceanic magnetic anomaly record.
ISSN: 0040-1951

insu-01683989
https://hal-insu.archives-ouvertes.fr/insu-01683989
https://hal-insu.archives-ouvertes.fr/insu-01683989/document
https://hal-insu.archives-ouvertes.fr/insu-01683989/file/teixell-tectono-2018.pdf
DOI : 10.1016/j.tecto.2018.01.009

Éditeur(s) : HAL CCSD Landes Bioscience
Résumé : International audience
In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
Autophagy

hal-00735751
https://hal.archives-ouvertes.fr/hal-00735751
PUBMED : 22966490

Résumé : L’objet de cette thèse est l’étude des comportements mécanique et à la corrosion d’un nouveau système de fondation, dit pieux SPIRMEC, adapté aux structures légères. Le travail s’est focalisé sur deux grands aspects. Le premier aspect concerne l’analyse du comportement sous chargement axiale des pieux SPIRMEC sur la base de l’expérimentation et de la modélisation numérique dans un sol mou non cohésif. Quant au deuxième aspect, il traite du problème de la corrosion de l’acier constituant le pieu dans un environnement tropical humide. Le comportement des pieux SPIRMEC sous une charge axiale de traction, dans un sol fin non cohésif, a montré le développement d’une surface cylindrique de rupture. Celle-ci ne dépend pas de la configuration géométrique des pieux tel que : l’espacement S, le diamètre d’hélice Dh et le diamètre du tube d. En adoptant ce critère de rupture et à l’aide d’une analyse statistique des données, nous avons proposé quatre méthodes analytiques de prédiction de la capacité portante des pieux SPIRMEC à partir des essais in-situ et au laboratoire qui sont: •Méthode CPT basée sur la résistance de pointe pénétromètrique (essai CPT), •Méthode MPT basée sur la pression limite pressiomètrique (essai MPT), •Méthode du couple d’installation, •Méthode analytique basée sur les paramètres de cisaillement de sol notamment l’angle de frottement interne (essais triaxial et boîte de cisaillement). Ces méthodes tiennent compte de la géométrie du pieu, du procédé de mise en oeuvre et de la compacité du sol. L’analyse de performance des méthodes proposées a montré que les méthodes analytique et CPT représentent mieux le comportement des pieux testés. La modélisation numérique du comportement des pieux SPIRMEC sous charge axiale de traction a été également étudiée à l’aide du code de calcul Plaxis 2D. Un modèle axisymétrique a été adopté pour modéliser la géométrie de la structure. Le modèle de comportement hardening soil a été retenu pour modéliser le comportement élastoplastiq des couches de sol. Un modèle élastique linéaire a été retenu pour le pieu. Quant au comportement de l’interface sol-structure, il a été pris en compte par un modèle élastoplastique basé sur les critères de Mohr-Coulomb. L’expansion du sol résultant de l’installation des pieux a été approchée par une cavité cylindrique. Cette dernière a été modélisée par des déformations volumiques anisotropes. Nous avons constaté, qu’appliquer une déformation volumique de l’ordre de 40% permet une bonne concordance entre les résultats numériques et expérimentaux. L’étude paramétrique nous a également permis de constater l’existence d’une variation linéaire entre la capacité portante et l’espacement S. Le comportement de l’acier galvanisé dans le sol a été également étudié au moyen de trois approches: électrochimique, visuelles grâce au microscope électronique et gravimétrique. Les tests électrochimiques de corrosion du zinc ont été réalisés dans la solution de sol artificielle pour deux périodes bien distinctes : saison des pluies et après 8 mois de contact sol-pieu. Une forte dépendance est constatée de la vitesse de corrosion de zinc au pH et à la conductivité de la solution. La vitesse de corrosion est plus importante en saison des pluies qu’après 8 mois de contact de pieu avec le sol. Les fortes concentrations en sulfates semblent augmenter la vitesse de corrosion. Les analyses menées au MEB montrent que la zone de fluctuation de nappe et en surface externe (sol/air) sont les zones les plus corrodées. La comparaison entre les différentes techniques d’évaluation de la vitesse de corrosion a montré que l’eau de nappe peut être utilisée comme un milieu représentatif du profil chimique d’un sol non cohésif et légèrement granulaire.
The purpose of this thesis is to study the both behaviors mechanical and of the corrosion of a new foundation system, called spirec piles, for lightweight structures. The work was based on two main aspects. The first aspect concerns the analysis of behavior of the spirmec piles under axial loading on the basis of experimental and numerical modeling in a non-cohesive soft soil. On the second aspect, it addresses the problem of corrosion of steel forming the pile in a humid tropical environment. The behavior of the tested piles under axial traction load, in a non-cohesive soil, showed the development of a cylindrical surface of failure. This does not depend on the geometrical configuration of the tested piles such that: the spacing s, the helix diameter dh and the diameter of the shaft. By adopting this failure criterion and using statistical data analysis, we proposed four analytical methods for predicting the bearing capacity of the piles from in-situ and laboratory tests, which are: cpt method based on tip resistance penetrometer (cpt test), mpt method based on pressuremeter limit pressure (test mpt), method of installation torque and analytical method based on the shear parameters of soil (triaxial tests and shear box). These methods take into account the geometry of the pile, the method and implementation of soil compaction. Performance analysis of the proposed methods showed that the analytical methods and cpt represent better the behavior of piles tested. An axisymmetric condition was assumed to model this geometry in two-dimensional space. In this study, we proposed to model the pipe screw pile with plates elements available in plaxis 2d. The helixes were modeled as circular disks. Interface elements were incorporated along the pile to simulate the soil-pile interaction. Hardening soil model was chosen to describe the soil with drained behavior was assigned for all layers. Linear elastic for pile and elastic plastic model based on the mohr-coulomb criterion was used to describe the interface behavior. The lateral expansion generated by the pile shaft was modeled by anisotropic volumetric strains (ɛxx=ɛzz, ɛyy=0). The pile behavior under tensile loading at different volumetric strains, it is clear that the best fit was obtained at volumetric strain of 40%. The parametric study also allowed us to establish the existence of a linear variation between the bearing capacity and spacings. The behavior of the galvanized steel in the ground has also been studied using three approaches such as: electrochemical, microscopic imaging and gravimetrically. Electrochemical tests of the corrosion of the zinc have been made in artificial soil solution into two periods, the rainy season and after eight months of contact soil-pile. Is a strong dependence of the observed corrosion rate of the zinc at the ph and conductivity of the solution. The corrosion rate is higher in the rainy season compared to eight months of contact of the pile with soil. High sulfate concentrations increase the rate of corrosion. The meb analysis shows that the fluctuation zone of the water table is the most corroded area. Comparison between the different methods of evaluating the corrosion rate showed that the ground water may be used as a representative profile of the chemical environment of a non-cohesive soil and slightly granular.

http://www.theses.fr/2014AGUY0790/document

Éditeur(s) : HAL CCSD American Society for Biochemistry and Molecular Biology
Résumé : International audience
Chronic low grade inflammation is closely linked to obesity-associated insulin resistance. To examine how administration of the anti-inflammatory compound indomethacin, a general cyclooxygenase inhibitor, affected obesity development and insulin sensitivity, we fed obesity-prone male C57BL/6J mice a high fat/high sucrose (HF/HS) diet or a regular diet supplemented or not with indomethacin (±INDO) for 7 weeks. Development of obesity, insulin resistance, and glucose intolerance was monitored, and the effect of indomethacin on glucose-stimulated insulin secretion (GSIS) was measured in vivo and in vitro using MIN6 β-cells. We found that supplementation with indomethacin prevented HF/HS-induced obesity and diet-induced changes in systemic insulin sensitivity. Thus, HF/HS+INDO-fed mice remained insulin-sensitive. However, mice fed HF/HS+INDO exhibited pronounced glucose intolerance. Hepatic glucose output was significantly increased. Indomethacin had no effect on adipose tissue mass, glucose tolerance, or GSIS when included in a regular diet. Indomethacin administration to obese mice did not reduce adipose tissue mass, and the compensatory increase in GSIS observed in obese mice was not affected by treatment with indomethacin. We demonstrate that indomethacin did not inhibit GSIS per se, but activation of GPR40 in the presence of indomethacin inhibited glucose-dependent insulin secretion in MIN6 cells. We conclude that constitutive high hepatic glucose output combined with impaired GSIS in response to activation of GPR40-dependent signaling in the HF/HS+INDO-fed mice contributed to the impaired glucose clearance during a glucose challenge and that the resulting lower levels of plasma insulin prevented the obesogenic action of the HF/HS diet.
ISSN: 0021-9258

hal-01074835
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01074835
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01074835/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01074835/file/JBC-2013-525220v2-Kristiansen-POSTPRINT.pdf
DOI : 10.1074/jbc.M113.525220

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The western margin of the Gulf of Mexico (Veracruz State, Mexico) displays an extensive Neogene gravitational system, whereby the Neogene siliciclastic sediments are detached from underlying Mesozoic carbonates along decollement surface in Oligocene underpressured clays. Rapidly subsiding half-grabens develop above the footwall associated with major listric faults, whereas mini-basins develop in the deepest parts of the slope, in conjunction with the growth of west-verging compressional features. Between the high-angle normal faults in the west and the thrust anticlines in the east, a wide roll-over structure has grown progressively, resulting in a major topographic break in the morphology of the slope profile. Coupled forward kinematic modelling (Thrustpack) and stratigraphic modelling (Dionisos), calibrated against seismic profiles and two key nearshore wells, have been applied to representative regional transects across the margin, in order to quantify the vertical (subsidence) and horizontal (gravitational) deformations, and to discuss the impact of various key parameters on the distribution of debris flow depositions. These simulations are compared with data from distant ODP wells and discussed in the scope of current exploration strategies in both the US and Mexican portions of the Gulf of Mexico basin.
ISSN: 0040-1951

hal-00424595
https://hal.archives-ouvertes.fr/hal-00424595
DOI : 10.1016/j.tecto.2008.06.017