Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Within the framework of the international field campaign COPS (Convective and Orographically induced Precipitation Study), a large suite of state-of-the-art meteorological instrumentation was operated, partially combined for the first time. This includes networks of in situ and remote-sensing systems such as the Global Positioning System as well as a synergy of multi-wavelength passive and active remote-sensing instruments such as advanced radar and lidar systems. The COPS field phase was performed from 01 June to 31 August 2007 in a low-mountain area in southwestern Germany/eastern France covering the Vosges mountains, the Rhine valley and the Black Forest mountains. The collected dataset covers the entire evolution of convective precipitation events in complex terrain from their initiation, to their development and mature phase until their decay. Eighteen Intensive Observations Periods with 37 operation days and eight additional Special Observations Periods were performed, providing a comprehensive dataset covering different forcing conditions. In this article, an overview of the COPS scientific strategy, the field phase, and its first accomplishments is given. Highlights of the campaign are illustrated with several measurement examples. It is demonstrated that COPS research provides new insight into key processes leading to convection initiation and to the modification of precipitation by orography, in the improvement of quantitative precipitation forecasting by the assimilation of new observations, and in the performance of ensembles of convection-permitting models in complex terrain.
ISSN: 0035-9009

hal-00565513
https://hal.archives-ouvertes.fr/hal-00565513
DOI : 10.1002/qj.752

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To better understand the microstructural evolution of a "serpentinized" mantle rock and the influence of various hydrous phases on the seismic properties of the mantle wedge, we have conducted the detailed microstructural analyses of a sample of tremolite-chlorite-antigorite schist collected from the Moses Rock dike (central part of the Colorado Plateau). We performed differential effective media (DEM) modelling to study the effect of three hydrous phases forming two-phase aggregates with olivine, considering the crystallographic preferred orientation (CPO) of each phase and the shape ratio of the hydrous phases. We have demonstrated that in a partially serpentinized peridotite, the olivine CPO characteristic of [100](010) dislocation glide is still preserved, and the high-temperature asthenospheric flow is preserved with a foliation normal to that of antigorite schist. The transformation of olivine into antigorite occurs predominantly (~ 75%) by the relationship (100)ol || (001)atg with [001]ol || [010]atg, with the (010)ol || (001)atg and [001]ol || [010]atg relationship observed in areas of weak antigorite CPO. Chlorite results from the phase transformation of olivine in a relatively static environment, as shown by the correlation between the olivine-chlorite CPOs with (100)ol || (100)ch, (010)ol || (001)ch and (001)ol || (010)ch. The fluid percolation that caused the localized metasomatism and partial hydration of the mantle occurred possibly along trans-lithospheric shear zones. The presence of chlorite induces the most important drop on the P-wave velocities and may help to explain some local low velocities in the fore-arc mantle wedges, but is unlikely to be of global importance due to its very high Vp/Vs ratio ~ 1.9. On the other hand, antigorite is the only phase that causes important modification on the propagation directions of P and S-waves, and the only phase to explain the polarization of the fastest shear waves parallel to the subduction trench.
ISSN: 0040-1951

hal-00858061
https://hal.archives-ouvertes.fr/hal-00858061
DOI : 10.1016/j.tecto.2013.03.022

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Structural, metamorphic, and geochronologic work shows that the Ampelos/Dilek nappe of the Cycladic blueschist unit in the eastern Aegean constitutes a wedge of high-pressure rocks extruded during early stages of orogeny. The extrusion wedge formed during the incipient collision of the Anatolian microcontinent with Eurasia when subduction and deep underthrusting ceased and the Ampelos/Dilek nappe was thrust southward over the greenschist-facies Menderes nappes along its lower tectonic contact, the Cycladic-Menderes thrust, effectively cutting out a ∼30- to 40-km-thick section of crust. The upper contact of the Ampelos/Dilek extrusion wedge is the top-to-the-NE Selçuk normal shear zone, along which the Ampelos/Dilek nappe was exhumed by ∼30–40 km. Detailed Rb-Sr and 40Ar/39Ar dating of mylonites demonstrates that both shear zones operated between 42 and 32 Ma. There is no evidence for episodic motion during the ∼10 Myr life span of the shear zones, suggesting that both shear zones operated in a steady, nonepisodic fashion. Our data provide supporting evidence that simultaneous thrust-type and normal sense shearing can accomplish the early exhumation of deep-seated rocks
ISSN: 0278-7407

hal-00405013
https://hal.archives-ouvertes.fr/hal-00405013
DOI : 10.1029/2005TC001872

Éditeur(s) : HAL CCSD
Résumé : We present high-resolution bulk sedimentary δ 15N data from the southern edge of the present-day oxygen minimum zone of the eastern South Pacific. The record is interpreted as representing changes in water column nitrogen removal during the last 70,000 years. We found significant fluctuations in the isotopic signal that suggest major reorganizations of the oxygen minimum zone at millennial timescales. These fluctuations were not related to other millennial-scale changes like the Northern Hemisphere's Dansgaard-Oeschger climate swings or local changes in primary productivity, so appear to be dictated by the Southern Hemisphere's climate rhythm. This is preliminarily corroborated by an overall agreement between our δ 15N data and the sedimentary proxy of ice sheet dynamics in Patagonia, which is in turn correlated with surface water properties at the midlatitude subduction region of the eastern South Pacific intermediate waters. Finally, potential implications on late Quaternary changes in atmospheric CO2 concentrations are discussed.
Paleoceanography / PALEOECEANOGRAPHY

hal-00407260
https://hal.archives-ouvertes.fr/hal-00407260
DOI : 10.1029/2006PA001308

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Transport of liquid and gaseous hydrocarbons through focused fluid flow systems is a widespread process in continental margins and sedimentary basins, which is gaining increased attention in the assessment of geohazards, environment conservation, and securing fossil energy resources. Studying the abundance, distribution and drivers for this process is crucial for understanding its role in 1) the dynamics of gas hydrate accumulation and destabilization, 2) submarine slope stability and related tsunamis, 3) the plethora of chemosynthetic benthic ecosystems that develop in deep seep sites, and 4) the input of greenhouse gases (e.g. methane) into the ocean/atmosphere system, which may influence the atmospheric carbon budget and Earth's paleo- and present climate. New ocean exploration tools provide ever more data and improve our understanding of these systems. However, the subject still suffers from a lack of interdisciplinary knowledge dissemination. The ongoing international debate about the timing and the processes that control fluid expulsion in sedimentary basins is fuelled by their implications for structural and petroleum geology. Because fluids expelled at cold seeps originate at depth they represent open windows into the underlying petroleum systems and are valuable indicators for the reservoir systems. They may also help in deciphering past and predicting future climate change because worldwide release of large amounts of fluids may have an impact on the chemistry of the ocean and atmosphere.
ISSN: 0025-3227

hal-00772472
https://hal.archives-ouvertes.fr/hal-00772472
DOI : 10.1016/j.margeo.2012.10.012

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The majority of the largest subduction megathrust earthquakes share the common characteristic of rupturing more than one asperity along strike of the margin. Understanding the factors that control coseismic failure of multiple asperities, and thus maximum magnitude, is central for seismic hazard assessment. To investigate the role of asperities size and spacing on maximum magnitude, seismicity rate, and percentage of synchronized ruptures, we use analog models simulating along-strike rupture behavior of megathrust earthquakes. We found negative correlations between the barrier-to-asperity length ratio Db/Da and maximum magnitude and seismicity rate. Db/Da also controls the process of asperities synchronization along the megathrust. A permanent barrier behavior is observed for Db/Da > 0.5. Comparing our experimental results to the Nankai Trough historical seismicity, we propose that the distribution of megathrust frictional heterogeneities likely explains the diversity of earthquakes which occurred there.
ISSN: 0094-8276

hal-01685546
https://hal.archives-ouvertes.fr/hal-01685546
https://hal.archives-ouvertes.fr/hal-01685546/document
https://hal.archives-ouvertes.fr/hal-01685546/file/Corbi_et_al-2017-Geophysical_Research_Letters.pdf
DOI : 10.1002/2017GL074182

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
Earth deformation is a multi-scale process ranging from seconds (seismic deformation) to millions of years (tectonic deformation). Bridging short- and long-term deformation and developing seismotectonic models has been a challenge in experimental tectonics for more than a century. Since the formulation of Reid's elastic rebound theory 100 years ago, laboratory mechanical models combining frictional and elastic elements have been used to study the dynamics of earthquakes. In the last decade, with the advent of high-resolution monitoring techniques and new rock analogue materials, laboratory earthquake experiments have evolved from simple spring-slider models to scaled analogue models. This evolution was accomplished by advances in seismology and geodesy along with relatively frequent occurrences of large earthquakes in the past decade. This coincidence has significantly increased the quality and quantity of relevant observations in nature and triggered a new understanding of earthquake dynamics. We review here the developments in analogue earthquake modelling with a focus on those seismotectonic scale models that are directly comparable to observational data on short to long timescales. We lay out the basics of analogue modelling, namely scaling, materials and monitoring, as applied in seismotectonic modelling. An overview of applications highlights the contributions of analogue earthquake models in bridging timescales of observations including earthquake statistics, rupture dynamics, ground motion, and seismic-cycle deformation up to seismotectonic evolution.
ISSN: 1869-9510

hal-01553120
https://hal.archives-ouvertes.fr/hal-01553120
https://hal.archives-ouvertes.fr/hal-01553120/document
https://hal.archives-ouvertes.fr/hal-01553120/file/rosenau2017.pdf
DOI : 10.5194/se-8-597-2017

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : No abstract available
ISSN: 1869-9510

hal-01115507
https://hal.archives-ouvertes.fr/hal-01115507
DOI : 10.5194/se-5-509-2014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Serpentinites from subduction environments represent an important sink for fluid-mobile elements. In order to constrain geochemical behavior of fluid-mobile elements hosted by serpentine phases during subduction processes, we carried out a geochemical study (trace elements and Pb isotopes) of a series of serpentinites and cumulates from the accretionary wedge of Greater Caribbean (Cuba and Dominican Republic). The trace element compositions of the primary and alteration-related phases were analyzed in situ using LA-HR-ICP-MS techniques. The studied samples represent parts of the subducted proto-Atlantic oceanic lithosphere, which has experienced low to high grade metamorphism (greenschist to eclogite facies), before being exhumed; a subset of these samples were derived from the mantle wedge. This sampling provides the opportunity to trace the chemical mobility of fluid-mobile elements during prograde metamorphism along a cold geotherm in an oceanic subduction setting.
ISSN: 0009-2541

hal-00720895
https://hal.archives-ouvertes.fr/hal-00720895
DOI : 10.1016/j.chemgeo.2012.04.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have integrated the relatively unknown distal domains of the Lower Congo basin, where the main depocenters of the Congo submarine fan are located, with the better-constrained successions on the shelf and upper slope, through the analysis of thousands of km of 2D seismic reflection profiles off-shore the Congo-Angola passive margin. The basin architecture is depicted by two ca. 800-km-long regional cross sections through the northern (Congo) and southern (Angola) margin. A large unit deposited basinward of the Aptian salt limit is likely to be the abyssal-plain equivalent of the upper-Cretaceous carbonate shelf that characterized the first post-rift deposits in West-equatorial African margins. A latest-Turonian shelf-deepening event is recorded in the abyssal plain as a long period (Coniacian-Eocene) of condensed sedimentation and basin starvation. The onset of the giant Tertiary Congo deep-sea fan in early Oligocene following this event reactivates the abyssal plain as the main depocenter of the basin. The time-space partitioning of sedimentation within the deep-sea fan results from the interplay among increasing sediment supply, margin uplift, rise of the Angola salt ridge, and canyon incision throughout the Neogene. Oligocene-early Miocene turbidite sedimentation occurs mainly in NW-SE grabens and ponded inter-diapir basins on the southern margin (Angola). Seaward tilting of the margin and downslope salt withdrawal activates the up-building of the Angola escarpment, which leads to a northward (Congo) shift of the transfer zones during late Miocene. Around the Miocene-Pliocene boundary, the incision of the Congo submarine canyon confines the turbidite flows and drives a general basinward progradation of the submarine fan into the abyssal plain The slope deposition is dominated by fine-grained hemipelagic deposits ever since. Results from this work contribute to better understand the signature in the ultra-deep deposits of processes acting on the continental margin as well as the basin-wide sediment redistribution in areas of high river input.
ISSN: 0040-1951

hal-00424533
https://hal.archives-ouvertes.fr/hal-00424533
DOI : 10.1016/j.tecto.2008.04.009

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : We provide evidence for a plume-like upwelling beneath the Eifel hotspot, Western Germany, by using teleseismic shear-wave splitting to resolve the anisotropy associated with upwelling flow that is spreading laterally into the asthenosphere. The variation in fast-polarization azimuth we find across the Eifel hotspot is explained by a model of slowly upwelling material that is horizontally being deflected or sheared in a parabolic asthenospheric flow (PAF) pattern toward west-southwest, a direction that correlates with Eurasian absolute plate motion. We suggest that the lack of an age progression for Eifel volcanism, which is expected for a fixed-upwelling model, is a result of (1) sporadic volcanism due to a low excess plume temperature and/or varying crustal stresses that periodically relax and facilitate eruption, and (2) complex upwelling flow pathways and/or Late Tertiary changes in the slow Eurasian plate motion. The success of the PAF model in fitting the data is remarkable given the small number of parameters (four) and the consistency with the plate motion direction determined from geology and/or geodesy. This suggests that a predictable mantle-anisotropy pattern may exist also for other hotspots driven by plume-like upwellings, and that splitting can be a useful diagnostic to differentiate between plume-like and alternative sources for mantle hotspots.
Mantle plumes - a multidisciplinary approach

hal-00407986
https://hal.archives-ouvertes.fr/hal-00407986
DOI : 10.1007/978-3-540-68046-8

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : This study presents a unique database of 172 plagioclase Crystallographic Preferred Orientations (CPO) of variously deformed gabbroic rocks. The CPO characteristics as a function of the deformation regime (magmatic or crystal-plastic) are outlined and discussed. The studied samples are dominantly from slow- and fast-spread present-day ocean crust, as well as from the Oman ophiolite. Plagioclase is the dominant mineral phase in the studied samples. Plagioclase CPOs are grouped into three main categories: Axial-B, a strong point alignment of (010) with a girdle distribution of [100]; Axial-A, a strong point maximum concentration of [100] with parallel girdle distributions of (010) and (001); and P-type, point maxima of [100], (010), and (001). A majority of CPO patterns are Axial-B and P-type, in samples showing either magmatic or crystal-plastic deformation textures. Axial-A CPOs are less common; they represent 21% of the samples deformed by crystal-plastic flow. Although fabric strength (ODF J index) does not show any consistent variation as a function of the CPO patterns, there is a significant difference in the relationship between the ODF and pole figures J indices; the magmatic type microstructures have high (010) pole figures J indices, which increase linearly with ODF J index, whereas the high [100] pole figures J indices of plastically deformed samples vary in a more scattered manner with ODF J index. The multistage nature of plastic deformation superposed on a magmatic structure compared with magmatic flow, and the large number of possible slip-systems in plagioclase probably account for these differences. Calculated seismic properties (P wave and S wave velocities and anisotropies) of plagioclase aggregates show that anisotropy (up to 12% for P wave and 14% for S wave) tends to increase as a function of ODF J index. In comparison with the olivine 1998 CPO database, the magnitude of P wave anisotropy for a given J index is much less than olivine, whereas it is similar for S wave anisotropy. Despite a large variation of fabric patterns and geodynamic setting, seismic properties of plagioclase-rich rocks have similar magnitudes of anisotropy. There is a small difference in the aggregate elastic symmetry, with magmatic microstructures having higher orthorhombic and hexagonal components, whereas plastic deformation microstructures have a slightly higher monoclinic component, possibly correlated with predominant monoclinic simple shear flow in plastically deformed samples. Overall, plots for CPO strength (ODF J index), pole figure strength, CPO symmetry and seismic anisotropy show significant scattering. This could be related to sampling statistics, although our database is a factor of ten higher than the olivine database of 1998, or it could be related to the low symmetry (triclinic) structure of plagioclase resulting in the addition of degrees of freedom in the processes creating the CPOs.
ISSN: 1869-9510

hal-00963439
https://hal.archives-ouvertes.fr/hal-00963439
DOI : 10.5194/se-4-511-2013

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We analyze the role of slab pull acting on the Pacific plate during its early Tertiary change in motion. Slab pull forces are estimated by integrating the negative buoyancy of a 700 km long slab along a revised subduction boundary model adopting the Muller et al. (2008) seafloor age reconstructions. Our results indicate that torques predicted from a simple slab pull model match the Pacific plate Euler vectors during the Tertiary fairly well. The change of the Pacific motion at similar to 50-40 Ma appears to be driven by the onset of the Izu-Bonin-Mariana system and, soon afterwards, by the Tonga-Kermadec subduction zones.
ISSN: 0094-8276

hal-00682150
https://hal.archives-ouvertes.fr/hal-00682150
https://hal.archives-ouvertes.fr/hal-00682150/document
https://hal.archives-ouvertes.fr/hal-00682150/file/faccennaGRL2012.pdf
DOI : 10.1029/2011GL050155

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition zone at the downdip end of seismic coupling along subduction interfaces is often the site of megathrust earthquake nucleation and concentrated postseismic afterslip, as well as the focus site of episodic tremor and slip features. Exhumed remnants of the former Alpine subduction zone found in the Swiss Alps allow analyzing fluid and deformation processes near the transition zone region (30–40 km paleodepth). The Dent Blanche Thrust (DBT) is a lower blueschist-facies shear zone interpreted as a fossilized subduction interface where granitic mylonites overlie a metamorphosed accretionary wedge. We report field observations from the DBT region where multiple, several tens of meters thick foliated cataclastic networks are interlayered within the basal DBT mylonites. Petrological results and microstructural observations indicate that the various cataclasis events took place at near-peak metamorphic conditions (400–500°C, 1.1–1.3 GPa) during subduction of the Tethyan seafloor in Eocene times (42–48 Ma). Some of these networks exhibit mutual crosscutting relationships between mylonites, foliated cataclasites, and vein systems indicating mutual overprinting between brittle deformation and ductile creep. Whole-rock chemical compositions, in situ 40Ar-39Ar age data of recrystallized phengite, and Sr isotopic signatures reveal that DBT rocks also underwent multiple hydrofracturing and metasomatic events via the infiltration of fluids mainly derived from the oceanic metasediments underneath the DBT. From the rock fabrics, we infer strain rate fluctuations of several orders of magnitude beyond subduction strain rates (∼10−12 s−1) accompanied by fluctuation of supralithostatic and quasi-lithostatic fluid pressures (1 ≥ λ > 0.95). DBT brittle-plastic deformation switches highlight the diversity of deformation processes and fluid-rock interactions in the transition zone region of the subduction interface.
ISSN: 1525-2027

hal-01243526
https://hal.archives-ouvertes.fr/hal-01243526
DOI : 10.1002/2015GC005776

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Quartz is a common crustal mineral that deforms plastically in a wide range of temperatures and pressures, leading to the development of different types of crystallographic preferred orientation (CPO) patterns. In this contribution we present the results of an extensive modeling of quartz fabric transitions via a viscoplastic self-consistent (VPSC) approach. For that, we have performed systematic simulations using different sets of relative critical resolved shear stress of the main quartz slip systems. We have performed these simulations in axial compression and simple shear regimes under constant Von Mises equivalent strain of 100% (γ = 1.73), assuming that the aggregates deformed exclusively by dislocation glide. Some of the predicted CPOs patterns are similar to those observed in naturally and experimentally deformed quartz. Nevertheless, some classical CPO patterns usually interpreted as result from dislocation glide (e.g. Y-maxima due to prism < a > slip) are clearly not developed in the simulated conditions. In addition we reported new potential preferred orientation patterns that might happen in high temperature conditions, both in axial compression and simple shear. We have demonstrated that CPOs generated under axial compression are usually stronger that those predicted under simple shear, due to the continuous rotation observed in the later simulations. The fabric strength depends essentially on the dominant active slip system, and normally the stronger CPOs result from dominant basal slip in < a >, followed by rhomb < a > and prism [c] slip, whereas prism < a > slip does not produce strong fabrics. The opening angle of quartz [0001] fabric used as a proxy of temperature seems to be reliable for deformation temperatures of ~ 400 °C, when the main slip systems have similar behaviors.
ISSN: 0040-1951

hal-01115674
https://hal.archives-ouvertes.fr/hal-01115674
DOI : 10.1016/j.tecto.2014.08.011