Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The behaviour of the four Ra isotopes (measured by gamma spectrometry) and 222Rn (measured with an AlphaGUARD ionisation chamber) has been investigated in NaCl-rich thermal waters of Balaruc-les-Bains on the Mediterranean coast (South of France). This study allows identification of the deep thermal water signature and reveals the influence of seawater or karst water inflows on Ra isotopes and 222Rn. The deep thermal water has 226Ra and 222Rn activities of 840 and 1900 mBq/l, respectively, a (228Ra/226Ra) activity ratio of 0.59, and low (224Ra/228Ra) and (223Ra/226Ra) ratios of 0.67 and 0.025, respectively. Several arguments suggest a dominant role of radioactive decay for short-lived Ra isotopes and Rn during the relatively rapid ascent of thermal water through wide open fractures and drains. The low (223Ra/226Ra) ratio constrains the maximum ascent velocity of thermal water to 8-10 m/h. Seawater inflow into the hydrothermal system results in an enrichment in short-lived Ra isotopes and 222Rn. The high (223Ra/226Ra) ratio (0.23) suggests that 223Ra, 224Ra and 222Rn produced by alpha-recoil in the upper-Jurassic limestone are entrained by seawater percolation through the coastal basement, due to active pumping in one of the near shore production well. This process would be enhanced by a low water/rock ratio (i.e. in a low-porosity, micro-fractured limestone). Mixing of this enriched seawater with thermal water induces barite precipitation with co-precipitation of a large fraction of Ra. Short-lived Ra isotopes may thus be useful tracers of seawater flux towards the continent. Conversely, the inflow and mixing of karst groundwater result in a general dilution of all dissolved elements, only a small enrichment in 224Ra and 223Ra, but a large enrichment in 222Rn (up to 26 Bq/l). The combination of Ra isotopes and 222Rn data provides a good way to trace the dynamics of different water masses along coastal areas.
ISSN: 0016-7037

hal-00795512
https://hal.archives-ouvertes.fr/hal-00795512
DOI : 10.1016/j.gca.2012.09.010

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The barrier reef tract of New Caledonia is the second largest in the world enclosing lagoons of variable width. The Late Quaternary evolution of these barrier reefs and lagoons is poorly known. A recent high resolution seismic and multibeam bathymetry survey was carried out in the south-western lagoon from shoreline to open ocean across the barrier reef pass systems to perform sequence stratigraphy and to better understand the Quaternary evolution of the lagoon. Two depositional sequences bounded by type-1 erosional surfaces can be identified. The bounding surfaces delineate the bottom of two generations of incised valleys. System tracts comprising a complete succession of regressive, lowstand, transgressive and highstand tracts were observed only in the upper sequence. Chronostratigraphic and sedimentological interpretations of the seismic data are based on correlations with the chronology defined in the nearby cores drilled through the reefs and in the gravity cores previously recovered in the inner lagoon. Interpretation of seismic data is also carried out on the basis of correlation with multibeam bathymetric data. Our results indicate that the history of the New Caledonian lagoon probably does not exceed 200ka marked by two or three brief episodes each of immersion of about ten thousand years. The bathymetric data reveal that during successive low sea level stands, the lagoon was dependent upon erosional fluvial networks. The deep fluvial valleys were connected to the continental slope through the passes. Seismic records reveal that upstream palaeo-channels are not connected to the modern coastal rivers. In contrast, many aggrading deposits, including numerous stacking channels, and extending across the proximal part of the outer lagoon, can be identified. Examination of drainage network morphology suggests a progressive tilt of the outer lagoon. Such evolution reveals that the Nouméa lagoon which is one of the widest in the world is an exceptional modern example of a rimmed shelf providing data to analyze the past counterparts.
ISSN: 0031-0182

insu-00338953
https://hal-insu.archives-ouvertes.fr/insu-00338953
DOI : 10.1016/j.palaeo.2008.08.012

Éditeur(s) : HAL CCSD
Résumé : International audience
GeoMod Conference 2016
Montpellier, France

insu-01397037
https://hal-insu.archives-ouvertes.fr/insu-01397037

Éditeur(s) : HAL CCSD Elsevier
Résumé : TAG LITHO
In this study we attempt to understand the water storage variations in a karst aquifer on the Larzac Plateau (South of France) using absolute gravimetry. On this karst system, water input is exclusively rainfall and draining occurs at the Durzon perennial spring in a karstic valley. Our basis assumption is that water storage in the vadose zone (epikarst and infiltration zone) has a significant effect on surface gravity through Newtonian attraction. The karst aquifer is hence being monitored since January 2006 with monthly absolute gravity measurements at three sites. The gravity measurements are corrected for regional scale gravity using water storage models in order to obtain gravity variations related exclusively to the local water storage variations. The gravity variations exhibit an important seasonal component (10-15 mu gal corresponding to a variation of equivalent water stab thickness of similar to 24-36 cm). Water storage variation seen by gravimetry is not spatially uniform on the studied karst system, corroborating current geomorphologic observations and interpretations. Finally, we use a global mass balance consideration linking rainfall, evapotranspiration and spring discharge to provide a conceptual framework for the understanding of observed gravity variations.
ISSN: 0022-1694

hal-00411884
https://hal.archives-ouvertes.fr/hal-00411884
DOI : 10.1016/j.jhydrol.2008.06.020

Éditeur(s) : HAL CCSD
Résumé : International audience
Proceedings GeoMod 2016
Montpellier, France

insu-01397036
https://hal-insu.archives-ouvertes.fr/insu-01397036

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The sediments of the Mauges Unit located in the internal zone provide an opportunity of studying the evolution of relief during Palaeozoic time. U-Pb dating on zircon and 39Ar/40Ar on white mica are used to constrain the age and nature of the sources. The first relief identified is marked by an Early Devonian unconformity interpreted as the opening of a northern back-arc basin. Detrital minerals are first reworked from underlying layers indicating a local supply. Magmatic zircons at c. 400 Ma then record the emergence of a magmatic arc. During the Middle Devonian, the gap in the sedimentary record is attributed to an emersion followed by the disappearance of the relief during the Late Devonian. At the Devonian-Carboniferous boundary, the main collision is followed by the onset of a relief. The continental sedimentation in the Ancenis Basin (late Tournaisian-Viséan) is a coarsening-upwards megasequence indicating an increasing and/or approaching relief. The detrital minerals record the progressive exhumation of Variscan metamorphic (mica at c. 350 Ma) and magmatic rocks (zircons at c. 390-340 Ma). The Serpukhovian-Bashkirian sedimentation records the erosion of a proximal metamorphic source (Champtoceaux with micas at c. 350-340 Ma) showing a much shorter drainage system
The Variscan Orogeny: Extent, Timescale and the Formation of the European Crust

ISBN : 978-1-86239-658-6
insu-01016985
https://hal-insu.archives-ouvertes.fr/insu-01016985
DOI : 10.1144/SP405.6

Éditeur(s) : HAL CCSD Springer
Résumé : The analysis of three different regions of the South- Pyrenean fold-and-thrust belt reveals that during the Tertiary compression the hydrological system was compartmentalised in time and space. During the early-middle Eocene, when the thrust front affected marine soft-sediments in the Ainsa basin, the thrust fault zones were dominated by formation fluids derived from Eocene marine waters trapped in the underlying Eocene marls, although influences of meteoric waters were also present. During the middle-late Eocene, when the thrust front emplaced marine rocks over continental redbeds in the eastern Catalan basin (L'Escala thrust), the thrust fault zones were dominated by meteoric fluids. These fluids flowed preferentially along these faults, draining laterally the meteoric fluids and acting as barriers hindering their flowing towards more external parts of the belt. During the Oligocene, the most external part of the fold-and-thrust belt in the eastern Catalan basin developed on top of a salt detachment horizon. The thrust front affected continental materials of late Eocene-Oligocene age. At this moment, the thrusts were conduits for meteoric fluids arriving from the surface and also for evolved meteoric fluids migrating over short distance upwards after being in contact with the underlying evaporitic beds. Most of the fractures show a similar sequence of microfractures. Microfractures of stage 1 formed when the sediment was poorly lithified. Microfractures of stage 2 represent the main episode of vein formation which developed when a progressive induration of the host sediment occurred. During microfracture stage 3, formed in an extensional regime, the host sediment was more indurated. The repetition of this sequence of microfractures in different fracture generations of the same outcrop indicates that the sediment induration was restricted to the vicinity of the vein. Away from the veins, the sediment remained poorly lithified during the entire deformation cycle. Calcite cement within the host rock precipitated later than the syn-compressive veins, when the sediment was more indurated. Elemental geochemistry and stable isotopes of the calcite veins indicates that early generation of microfractures is infilled by local fluids (either marine or meteoric), whereas external fluids (meteoric or evolved meteoric) infilled the main compressive stage of microfractures. The hot temperature of these fluids (157°C to 183°C in the Atiart-Arro example) indicates their circulation through deep parts of the thrust belt. The progressive increase of the 87Sr/86Sr ratio through time is due to the progressive uplift, exposure and erosion of the internal Pyrenean Axial Zone.
Thrust belts and foreland basins, from fold kinematics to hydrocarbon systems

hal-00408001
https://hal.archives-ouvertes.fr/hal-00408001
DOI : 10.1007/978-3-540-69426-7_5

Résumé : L’objet de cette thèse est l’étude des comportements mécanique et à la corrosion d’un nouveau système de fondation, dit pieux SPIRMEC, adapté aux structures légères. Le travail s’est focalisé sur deux grands aspects. Le premier aspect concerne l’analyse du comportement sous chargement axiale des pieux SPIRMEC sur la base de l’expérimentation et de la modélisation numérique dans un sol mou non cohésif. Quant au deuxième aspect, il traite du problème de la corrosion de l’acier constituant le pieu dans un environnement tropical humide. Le comportement des pieux SPIRMEC sous une charge axiale de traction, dans un sol fin non cohésif, a montré le développement d’une surface cylindrique de rupture. Celle-ci ne dépend pas de la configuration géométrique des pieux tel que : l’espacement S, le diamètre d’hélice Dh et le diamètre du tube d. En adoptant ce critère de rupture et à l’aide d’une analyse statistique des données, nous avons proposé quatre méthodes analytiques de prédiction de la capacité portante des pieux SPIRMEC à partir des essais in-situ et au laboratoire qui sont: •Méthode CPT basée sur la résistance de pointe pénétromètrique (essai CPT), •Méthode MPT basée sur la pression limite pressiomètrique (essai MPT), •Méthode du couple d’installation, •Méthode analytique basée sur les paramètres de cisaillement de sol notamment l’angle de frottement interne (essais triaxial et boîte de cisaillement). Ces méthodes tiennent compte de la géométrie du pieu, du procédé de mise en oeuvre et de la compacité du sol. L’analyse de performance des méthodes proposées a montré que les méthodes analytique et CPT représentent mieux le comportement des pieux testés. La modélisation numérique du comportement des pieux SPIRMEC sous charge axiale de traction a été également étudiée à l’aide du code de calcul Plaxis 2D. Un modèle axisymétrique a été adopté pour modéliser la géométrie de la structure. Le modèle de comportement hardening soil a été retenu pour modéliser le comportement élastoplastiq des couches de sol. Un modèle élastique linéaire a été retenu pour le pieu. Quant au comportement de l’interface sol-structure, il a été pris en compte par un modèle élastoplastique basé sur les critères de Mohr-Coulomb. L’expansion du sol résultant de l’installation des pieux a été approchée par une cavité cylindrique. Cette dernière a été modélisée par des déformations volumiques anisotropes. Nous avons constaté, qu’appliquer une déformation volumique de l’ordre de 40% permet une bonne concordance entre les résultats numériques et expérimentaux. L’étude paramétrique nous a également permis de constater l’existence d’une variation linéaire entre la capacité portante et l’espacement S. Le comportement de l’acier galvanisé dans le sol a été également étudié au moyen de trois approches: électrochimique, visuelles grâce au microscope électronique et gravimétrique. Les tests électrochimiques de corrosion du zinc ont été réalisés dans la solution de sol artificielle pour deux périodes bien distinctes : saison des pluies et après 8 mois de contact sol-pieu. Une forte dépendance est constatée de la vitesse de corrosion de zinc au pH et à la conductivité de la solution. La vitesse de corrosion est plus importante en saison des pluies qu’après 8 mois de contact de pieu avec le sol. Les fortes concentrations en sulfates semblent augmenter la vitesse de corrosion. Les analyses menées au MEB montrent que la zone de fluctuation de nappe et en surface externe (sol/air) sont les zones les plus corrodées. La comparaison entre les différentes techniques d’évaluation de la vitesse de corrosion a montré que l’eau de nappe peut être utilisée comme un milieu représentatif du profil chimique d’un sol non cohésif et légèrement granulaire.
The purpose of this thesis is to study the both behaviors mechanical and of the corrosion of a new foundation system, called spirec piles, for lightweight structures. The work was based on two main aspects. The first aspect concerns the analysis of behavior of the spirmec piles under axial loading on the basis of experimental and numerical modeling in a non-cohesive soft soil. On the second aspect, it addresses the problem of corrosion of steel forming the pile in a humid tropical environment. The behavior of the tested piles under axial traction load, in a non-cohesive soil, showed the development of a cylindrical surface of failure. This does not depend on the geometrical configuration of the tested piles such that: the spacing s, the helix diameter dh and the diameter of the shaft. By adopting this failure criterion and using statistical data analysis, we proposed four analytical methods for predicting the bearing capacity of the piles from in-situ and laboratory tests, which are: cpt method based on tip resistance penetrometer (cpt test), mpt method based on pressuremeter limit pressure (test mpt), method of installation torque and analytical method based on the shear parameters of soil (triaxial tests and shear box). These methods take into account the geometry of the pile, the method and implementation of soil compaction. Performance analysis of the proposed methods showed that the analytical methods and cpt represent better the behavior of piles tested. An axisymmetric condition was assumed to model this geometry in two-dimensional space. In this study, we proposed to model the pipe screw pile with plates elements available in plaxis 2d. The helixes were modeled as circular disks. Interface elements were incorporated along the pile to simulate the soil-pile interaction. Hardening soil model was chosen to describe the soil with drained behavior was assigned for all layers. Linear elastic for pile and elastic plastic model based on the mohr-coulomb criterion was used to describe the interface behavior. The lateral expansion generated by the pile shaft was modeled by anisotropic volumetric strains (ɛxx=ɛzz, ɛyy=0). The pile behavior under tensile loading at different volumetric strains, it is clear that the best fit was obtained at volumetric strain of 40%. The parametric study also allowed us to establish the existence of a linear variation between the bearing capacity and spacings. The behavior of the galvanized steel in the ground has also been studied using three approaches such as: electrochemical, microscopic imaging and gravimetrically. Electrochemical tests of the corrosion of the zinc have been made in artificial soil solution into two periods, the rainy season and after eight months of contact soil-pile. Is a strong dependence of the observed corrosion rate of the zinc at the ph and conductivity of the solution. The corrosion rate is higher in the rainy season compared to eight months of contact of the pile with soil. High sulfate concentrations increase the rate of corrosion. The meb analysis shows that the fluctuation zone of the water table is the most corroded area. Comparison between the different methods of evaluating the corrosion rate showed that the ground water may be used as a representative profile of the chemical environment of a non-cohesive soil and slightly granular.

http://www.theses.fr/2014AGUY0790/document

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Detrital zircons in metasedimentary rocks attributed to three different complexes in the Central and Pernambuco-Alagoas domains of the Borborema Province, northeastern Brazil, were dated by LA-ICP-MS. Two samples from each of the following complexes were analyzed: Sertania and Surubim, in the Central Domain, and Rio Una, in the Pernambuco-Alagoas Domain. One sample of the Sertania Complex yielded only Paleoproterozoic zircons, whereas Neoproterozoic zircons predominate in the other, with the youngest zircon indicating deposition after 642 Ma. One of the samples of the Surubim Complex yielded, again, only Paleoproterozoic concordant zircon ages. In the other sample, although Paleoproterozoic zircons predominate, ages vary from the Mesoarchean to the Neoproterozoic. The age of the youngest zircon in this latter sample indicates deposition after 850 Ma and an overgrowth on an Archean grain yielded an age of 623 +/- 6 Ma (2 sigma), interpreted as the age of peak metamorphism. The two samples of the Rio Una Complex yielded predominantly detrital zircons with ages in the ranges 2.2-2.1 Ga and 1.7-1.6 Ga. In this complex, the youngest detrital zircon suggests deposition after 917 Ma and metamorphic zircons indicate peak metamorphic conditions between 600 Ma and 617 Ma.;The results of this study, together with available data from the literature, allow the following conclusions: (a) The Sertania Complex is a Neoproterozoic sequence, and not Paleoproterozoic, as previously thought; (b) The similarity in lithological associations, detrital zircon populations and C isotope signature between the Sertania and Surubim complexes suggest that they belong to the same lithostratigraphic unit; (c) Although the Rio Una Complex can be older than the Sertania/Surubim Complex, the lack of zircons younger than 900 Ma can also result from insufficient sampling or absence of young rocks alongside the drainage system that collected detritus to this complex: (d) The regional metamorphism related to the Brasiliano Orogeny attained its climax at 630-600 Ma; (e) The age spectra of detrital zircons require their derivation from erosion of rocks formed not only during known geological events in the Borborema Province and in the nearby Sao Francisco/Congo Craton, but also from the Amazonian Craton, suggesting accumulation in an intracratonic setting within a preexisting large continent: (f) The short timespan between deposition and orogenic deformation may explain the overall medium- to high-temperature metamorphism due to maintenance, in the subsequent compressional event, of the elevated geothermal gradients produced during broad-scale lithosphere extension.
ISSN: 0301-9268

hal-00443856
https://hal.archives-ouvertes.fr/hal-00443856
DOI : 10.1016/j.precamres.2009.09.009

Éditeur(s) : HAL CCSD
Résumé : International audience
Two opposing visions of the Aegean backarc tectonics implicitly contain contrasting images of the rheological behaviour of the lihosphere, supported by different sets of observations. The propagation of the NAF and extension in the Corinth Rift suggest a strongly localising rheology whereas the formation of MCC in the Cyclades and the Rhodope suggests instead a more viscous behaviour. This paradox was the seminal question addressed by the ANR-EGEO programme (2007-2010) that leads to the following conclusions: (1) The exhumation of the Cycladic MCC's is accommodated by the N-dipping North Cycladic Detachment System (NCDS) that partly reworks the Vardar suture and at the base by a series of thrusts, including the basal contact of the Cycladic Blueschists (CBS) over the Cycladic Basement (CB). The activity of LANF is due to the reactivation of pre-existing discontinuities such as thrusts or earlier detachments and much less to the interaction with granitic plutons. (2) Exhumation in the Cyclades has proceeded in two stages: (a) Eocene syn-orogenic exhumation within the subduction lower/upperplate interface while the post-orogenic Rhodope MCC formed further north, (b) Oligo-Miocene post-orogenic extension in an MCC mode coeval with syn-orogenic exhumation in Crete and the Peloponnese. (3) Both stages were associated with slab retreat, as early as the Eocene with an acceleration at 30-35 Ma. (4) The localisation of the presently active steeply-dipping normal faults on the southern margin of the Corinth Rift may have been preceded by a partial reworking of thrusts and syn-orogenic detachments by shallow-dipping decollements. (5) The localisation of the NAF in the Marmara Sea region and the Northern Aegean Sea is now accurately dated between 5.3 and 5 Ma Ma using the erosion and deposition surfaces that mark the Messinian salinity Crisis and nannofossils ages. (6) The formation of MCCs in the Cyclades resulted in the draining of the low viscosity lower crust from the northern Aegean Sea and led to an easier coupling between upper mantle and upper crust, easing the localisation and propagation of the NAF. (7) A comparison between crustal and mantle finite strain suggests that mantle flow due to slab retreat controls the stretching of the crust. Our model involves progressive slab retreat and mantle flow below the overriding plate inducing the observed succession of tectonic episodes with a progressive localisation of extension due to several slab tearing events. There is no paradox in the tectonic history and rheological behaviour of the Aegean lithosphere but an evolution of the kinematic boundary conditions due to slab deformation at depth.
American Geophysical Union
San Francisco, United States

insu-00860518
https://hal-insu.archives-ouvertes.fr/insu-00860518
BIBCODE : 2010AGUFM.T13G..04J

Éditeur(s) : HAL CCSD
Résumé : Patagonia is well known for spectacular occurrences of a variety of glacial-derived landforms and deposits and for a long history of ancient glaciations. In this paper, we first review the diverse evidence that demonstrates the development of glacial-related sedimentary units within the Central Patagonian Cordillera since 7 Ma. Well preserved glacial landforrns at the top surface of mesetas on both sides of the Lago General Carrera-Buenos Aires are described: the Meseta Guenguel to the north, and the volcanic Meseta del Lago Buenos Aires to the south. The latter meseta corresponds to a 3 Ma old, morphologically inverted paleo-piedmont, based on Ar/Ar dates of the uppermost lava flows. It shows evidence of glacier advances to the NE direction. Over a distance of 20 km, glacial landforms observed by remote sensing data and digital elevation model define glacial tongues that were fed by the Cordillera reliefs to the west. These lobes are now beheaded from their westward sources along a morpho-structural corridor that bounds the Meseta del Lago Buenos Aires to the west. These remnants can be correlated with the oldest glacial landforms recognized north of Lago General Carrera-Buenos Aires, on the Meseta Guenguel that form the Chipanque moraine system. From these features it is concluded that the glacial drainage network of Central Patagonia has been strongly modified following relief inversion in response to erosion processes and to tectonic causes. Changes occurred after 3 Ma, from a smooth piedmont surface covered by an extensive ice mantle ending with ample glacial lobes, to the current series of deeply incised glacial valleys such as the Lago General Carrera-Buenos Aires depression. These new data bear important constraints on the history and development of the first glaciations in southern South America.
ANDEAN GEOLOGY

hal-00512682
https://hal.archives-ouvertes.fr/hal-00512682

Éditeur(s) : HAL CCSD Ecole nationale du génie rural
Résumé :  
A l'échelle de l'arbre, la fertilité chimique des sols semble expliquer la localisation majoritairement superficielle du système racinaire, alors que le type de drainage explique la forte variabilité de sa répartition verticale. Les racines profondes, malgré leur faible proportion, jouent un rôle important pour extraire l'eau en saison sèche. A l'échelle du peuplement, les variations latérales du sol influent sur des processus tels que la compétition inter-individuelle et la sylvigénèse. Pour les sols de terre ferme, plus les conditions édaphiques sont contraignantes, plus les gros arbres sont rares dans le peuplement forestier. Celui-ci est dense lorsque le sol est très aminci, moins dense en situation hydromorphe. Le sol influence nettement la composition floristique des peuplements. Mais d'autres facteurs tels la dynamique sylvigénétique ou la dynamique propre à chaque population ont un poids très important. Des résultats divergents conduisent à formuler de nouvelles hypothèses, parmi celles-ci l'influence majeure de l'épaisseur du profil d'altération.
ISSN: 0035-2829

hal-01031882
https://hal.archives-ouvertes.fr/hal-01031882