Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
In Eastern China, the North China Block (NCB) has experienced a complex tectonic evolution during Late Palaeozoic to Mesozoic times. The unconformable sedimentary cover, which ranges in age from Neoproterozoic to Permian, underwent two tectonic episodes in Early Triassic and Cretaceous times. An early north–south compressional phase, D1, characterized by north-verging recumbent folds with east–west-trending axes and top-to-the-north ductile shear zones can be observed in a gabbroic pluton and the Neoproterozoic sedimentary host rocks. The available radiometric ages allow us to interpret this event as an Early Triassic back-thrusting related to the final stage of the collision between the North China and South China Blocks. During the LateMesozoic, an extensional event characterized by (1) half-grabens filled by continental terrigeneous red beds and lava flows, (2) low-angle detachment faults, (3) synkinematic granitic plutons, and (4) metamorphic core complexes is widespread in the Eastern Liaoning Peninsula. This extensional D2 event can be subdivided into a ductile deformation and a brittle deformation, corresponding to different expressions of crustal deformation. In every area studied in the Eastern Liaoning Peninsula, the ductile D2 deformation is characterized by a NW–SE-trending stretching lineation with a top-to-the-NWsense of shear.Mica and amphibole fromthe metamorphic country rocks, granodioritic or monzogranitic plutons and their mylonitized margins yield 40Ar/39Ar ages ranging from 130 to 120 Ma. These dates support fast cooling and exhumation rates coeval with the extensional tectonics. The brittle D2 deformation is responsible for the formation of high-angle normal faults marked by low-temperature cataclasites bounding half-grabens. During the Mesozoic, the tectonic regime of Eastern China experienced a significant inversion from compression to extension. The Eastern Liaoning Peninsula massif provides an example of this geodynamic transition.
ISSN: 2041-4927

hal-00134055
https://hal-insu.archives-ouvertes.fr/hal-00134055
DOI : 10.1144/SP280.7

Éditeur(s) : The Geological Society of London
Résumé : Conservational models, like simple shear, pure shear or polyphase models that exclude exchanges between the lower continental crust and upper mantle, are usually proposed to explain the lithospheric stretching and consequent crustal thinning of passive continental margins. These models need large amounts of horizontal movement, and have, therefore, important implications for plate kinematic reconstructions and intraplate deformation. In this paper we propose to show these implications in the Central Segment of the South Atlantic Ocean. In the Angola–Brazilian system, these models imply about 240 km of horizontal movement. This movement can be compensated by two end-member mechanisms: (1) an intraplate deformation located in Africa; and (2) an intraplate deformation located in South America. We detail for each solution the strong geological and geodynamical implications, and discuss the consequences for the genesis of passive continental margins.
Geological Society, special publication (0375-6440) (The Geological Society of London), 2012-02 , Vol. 369 , P. 75-90

Droits : The Geological Society of London 2012
http://archimer.ifremer.fr/doc/00087/19839/17757.pdf
DOI:10.1144/SP369.5
http://archimer.ifremer.fr/doc/00087/19839/

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : We have applied transmission electron microscopy (TEM) analyses coupled with viscoplastic self-consistent (VPSC) numerical modelling to identify the active slip systems and to better understand the crystal preferred orientation (CPO) development of the Torridon quartz mylonite (NW Scotland). TEM analyses showed evidence of activation of 1/3〈a〉{π′}, 1/3〈a〉{z} and possible 〈a〉(c) slip systems, as well as dislocation climb and dynamic recrystallization. All the CPOs generated by VPSC models share common characteristics with the Torridon quartz mylonite, but only Models 2 and 3 reproduce the [c]-axes maxima at low angle (<20°) to the foliation pole along the YZ plane, as observed in the mylonite. In Model 2, this concentration only occurs at γ≥2.6, whereas in Model 3 this maxima occurs at lower shear strains. The models that start with a previous preferred orientation acquire very strong CPOs after small-imposed strains, followed by the rapid rotation of the fabric in relation to the new imposed finite strain axes. The combined activation of 〈a〉{π′}, 〈a〉{z} and possibly 〈a〉(c) slip systems, as demonstrated by TEM analyses, suggests that the VPSC model that best predicts CPO development in the Torridon quartz mylonite is Model 2, where the critical resolved shear stress (CRSS) of 〈a〉{π/π′} is assumed to be slightly stronger than 〈a〉(c).
Deformation Mechanisms, Rheology and Tectonics: Microstructures, Mechanics and Anisotropy

hal-00688840
https://hal.archives-ouvertes.fr/hal-00688840

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : The Zagros Simply Folded Belt (ZSFB) is an active fold-and-thrust belt resulting from the still continuing continental collision between the Arabian plate and the Iranian plate, which probably started in the Oligocene. The present-day shortening (N25°) is well documented by focal mechanisms of earthquakes and global positioning system (GPS) surveys. We propose in this study a comparison of published palaeostress markers, including magnetic fabric, brittle deformation and calcite twinning data. In addition, we describe the magnetic fabric from Palaeocene carbonates (10 sites) and Mio-Pliocene clastic deposits (15 sites). The magnetic fabrics are intermediate, with magnetic foliation parallel to the bedding, and a magnetic lineation mostly at right angles to the shortening direction. This suggests that the magnetic fabric retains the record of an early layer-parallel shortening (LPS) that occurred prior to folding. The record of LPS allows the identification of originally oblique folds such as the Mand Fold, which have developed in front of the Kazerun Fault. The shape parameter of the magnetic fabric indicates a weak strain compatible with the development of detachment folds in the ZSFB. The palaeostress datasets, covering the Palaeocene to Pleistocene time interval, support several folding episodes accompanied by a counter-clockwise rotation of the stress field direction. The Palaeocene carbonates in the ZSFB record a N47 LPS during early to middle Miocene detachment folding in the High Zagros Belt (HZB). The Mio-Pliocene clastic deposits recorded a N38 LPS prior to and during detachment folding within the ZSFB at the end of the Miocene-Pliocene. Similarly, fault slip and calcite twin data from the ZSFB also support a counter-clockwise rotation from NE to N20 between the pre-folding stage and the late rejuvenation of folds. This counter-clockwise trend of palaeostress data agrees with fault slip data from the HZB. During the late stage of folding in the ZSFB, the Plio-Quaternary palaeostress trends are consistently parallel to the present-day shortening direction.
Tectonic and stratigraphic evolution of Zagros and Makran during the Mesozoic-Cenozoic

hal-00545036
https://hal.archives-ouvertes.fr/hal-00545036
DOI : 10.1144/SP330.6

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The interplay between tectonics and erosion has a predominant control on the evolution of the morphology of mountain belts. Here we investigate the modalities of deformation in Central Nepal on a c. 100 ka time scale in response to tectonic and external forcings, through the use of a finite-element thermomechanical model coupled with an integrative denudation formulation that accounts for fluvial incision and hillslope landsliding. We study the complex coupling existing between tectonics and erosion, with special emphasis on the influences of rock strength and rainfall distributions. Our results underline the key role played by lithologic variations in the elevation of both rivers and mean topography. We show that the location of the Main Frontal Thrust is mainly controlled by the low erodability of the unconsolidated sandstone in the Siwaliks Hills. As previously suspected (Burbank et al. 2003), our simulations demonstrate that the pattern of uplift in Nepal is mainly dependent on both erodability and fault geometry, rather than on rainfall distribution.
ISSN: 2041-4927

hal-01543331
https://hal-amu.archives-ouvertes.fr/hal-01543331
DOI : 10.1144/GSL.SP.2006.253.01.18

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
This paper presents the background for the calculation of various numbers that can be used to characterize crystal-preferred orientation (CPO), also known as texture in materials science, for large datasets using the combined scripting possibilities of MTEX and MatLab®. The paper is focused on three aspects in particular: the strength of CPO represented by orientation and misorientation distribution functions (ODFs, MDFs) or pole figures (PFs); symmetry of PFs and components of ODFs; and elastic tensors. The traditional measurements of texture strength of ODFs, MDFs and PFs are integral measurements of the distribution squared. The M-index is a partial measure of the MDF as the difference between uniform and measured misorientation angles. In addition there other parameters based on eigen analysis, but there are restrictions on their use. Eigen analysis does provide some shape factors for the distributions. The maxima of an ODF provides information on the modes. MTEX provides an estimate of the lower bound uniform fraction of an ODF. Finally, we illustrate the decomposition of arbitrary elastic tensor into symmetry components as an example of components in anisotropic physical properties. Ten examples scripts and their output are provided in the appendix.
Geological Society Special Publication

hal-01277689
https://hal.archives-ouvertes.fr/hal-01277689
DOI : 10.1144/SP409.8

Éditeur(s) : HAL CCSD Geological society of London
Résumé : International audience
We present a synthesis of the tectonic and thermochronological evolution of the Eastern Tibet since the Triassic. The long-term cooling histories obtained on magmatic and metamorphic rocks of the South Songpan-Garze--, Kunlun and Yidun blocks are similar showing a very slow and regular cooling during Late Jurassic and Cretaceous, confirming the suspected lack of major tectonic events between c. 150 and 30 Ma. The exhumation linked to the Tertiary growth of the Tibetan Plateau initiated around 30 Ma and concentrates at the vicinity of the major tectonic structures. Exhumation rates increased again from about 7 Ma in the Longmen Shan. To interpret this very slow cooling rate between Late Jurassic and Early Cenozoic from granites of this area, we use a simple 1D thermal model that takes into account the thermal properties of both sediments and crust. The results suggest that: (1) high temperature (500 8C) can be kept over a long period of time; (2) during Cretaceous, cooling is mostly controlled by the thermal properties of sediments of continental origin; and (3) the initial Late Triassic rapid cooling rate was caused by the large thermal contrast between the granite body and the sedimentary rocks rather than by a high exhumation rate.
Growth and Collapse of the Tibetan Plateau

insu-00610491
https://hal-insu.archives-ouvertes.fr/insu-00610491
DOI : 10.1144/SP353.2

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : Permo-Triassic rift basins offer important hydrocarbon targets along the Atlantic margins. Their fill is dominated by continental red beds, comprising braided fluvial, alluvial fan, aeolian, floodplain and lacustrine facies. These relatively lightly explored basins span both the Atlantic and Tethyan domains and developed above a complex basement with inherited structural fabrics. Sparse data in offshore regions constrain understanding of depositional geometries and sedimentary architecture, further impeded by their deep burial beneath younger strata, combined with the effects of later deformation during continental breakup. This paper provides results from a multidisciplinary analysis of basins along the Atlantic margin. Regional seismic and well data, combined with geochemical provenance analysis from the European North Atlantic margins, are integrated with detailed outcrop studies in Morocco and Nova Scotia. The research provides new insights into regional basin tectonostratigraphic evolution, sediment fill, and reservoir distribution, architecture and quality at a range of scales. Regional seismic profiles, supported by key well data, indicate the presence of post-orogenic collapse basins, focused narrow rifts and low-magnitude multiple extensional depocentres. Significantly, Permo-Triassic basin geometries are different and more varied than the overlying Jurassic and younger basins. Provenance analysis using Pb isotopic composition of detrital K-feldspar yields new and robust controls on the sediment dispersal patterns of Triassic sandstones in the NE Atlantic margin. The evolving sedimentary architecture is characterized by detailed sedimentological studies of key outcrops of age equivalent Permian-Triassic rifts in Morocco and Nova Scotia. The interplay of tectonics and climate is observed to influence sedimentation, which has significant implications for reservoir distribution in analogue basins. New digital outcrop techniques are providing improved reservoir models, and identification of key marker horizons and sequence boundaries offers a potential subsurface correlation tool. Future work will address source and seal distribution within the potentially petroliferous basins.
Petroleum Geology: From Mature Basins to New Frontiers Proceedings of the 7th Petroleum Geology Conf

hal-00590618
https://hal.archives-ouvertes.fr/hal-00590618

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
Since the early descriptions published by Callaway in 1884, the gently dipping mylonites exposed along the Moine Thrust at the Stack of Glencoul have drawn generations of geologists to the northern part of the Assynt district. These mylonites, derived from Cambrian quartzites (footwall) and Moine pelites and psammites (hanging wall), have figured prominently in: a) early research into the influence of crystal plastic deformation and recrystallization on microstructural and crystal fabric evolution; b) debates on the kinematic interpretation of macro- and micro-structures and crystal fabrics; and c) debates on the tectonic significance of such kinematic data. In this paper first we briefly review the historical aspects of this research and then, using both previously published and unpublished data, document the finite strain and quartz fabric development at this classic mylonite locality. A tectonic interpretation of these data, together with quantitative estimates of flow vorticities associated with mylonite formation at the Stack of Glencoul, are presented in a companion paper by Law (2010).
Continental Tectonics and Mountain Building: The Legacy of Peach and Horne, Geological Society Speci

hal-00564962
https://hal.archives-ouvertes.fr/hal-00564962

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
Low-velocity zones ('bright spots') imaged by the INDEPTH seismic experiment in southern Tibet are extensively interpreted as widespread partial melt within the crust, which has given a strong support for the channel flow model. These suggest that a continuous seismic low-velocity zone underlies Tibet on the large scale. Here we take advantage of the Hi-CLIMB seismic experiment which includes a dense south-north profile and a lateral 2D seismic network to assess the vertical and the horizontal extension of low-velocity zones in southern Tibet. Several approaches including migration, amplitude analysis and waveform inversion of receiver functions are performed to detect crustal low-velocity zones using this new seismological dataset. Our results reveal localized and discontinuous low-velocity zones in Tibet. They indicate that the vertical extension of the low-velocity zones is about 10 km, and their maximum horizontal length appears to be c. 50 km. Our study suggests a partial correlation between the location of these low-velocity zones and the spatial distribution of Tibetan grabens. These results, especially the non-continuity of low-velocity zones, together with the observed regular value of mean crustal VP/VS ratio, question the existence of widespread partial melt of the southern Tibetan crust and, therefore, the viability of the channel flow model.
Growth and Collapse of the Tibetan Plateau

hal-00853971
https://hal.archives-ouvertes.fr/hal-00853971
DOI : 10.1144/SP353.6

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The sediments of the Mauges Unit located in the internal zone provide an opportunity of studying the evolution of relief during Palaeozoic time. U-Pb dating on zircon and 39Ar/40Ar on white mica are used to constrain the age and nature of the sources. The first relief identified is marked by an Early Devonian unconformity interpreted as the opening of a northern back-arc basin. Detrital minerals are first reworked from underlying layers indicating a local supply. Magmatic zircons at c. 400 Ma then record the emergence of a magmatic arc. During the Middle Devonian, the gap in the sedimentary record is attributed to an emersion followed by the disappearance of the relief during the Late Devonian. At the Devonian-Carboniferous boundary, the main collision is followed by the onset of a relief. The continental sedimentation in the Ancenis Basin (late Tournaisian-Viséan) is a coarsening-upwards megasequence indicating an increasing and/or approaching relief. The detrital minerals record the progressive exhumation of Variscan metamorphic (mica at c. 350 Ma) and magmatic rocks (zircons at c. 390-340 Ma). The Serpukhovian-Bashkirian sedimentation records the erosion of a proximal metamorphic source (Champtoceaux with micas at c. 350-340 Ma) showing a much shorter drainage system
The Variscan Orogeny: Extent, Timescale and the Formation of the European Crust

ISBN : 978-1-86239-658-6
insu-01016985
https://hal-insu.archives-ouvertes.fr/insu-01016985
DOI : 10.1144/SP405.6

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : The Borborema and Benin–Nigeria provinces of NE Brazil and NW Africa, respectively, are key areas in the amalgamation of West Gondwana by continental collision during the Brasiliano/Pan-African orogenies. Both are underlain by complex basement: Nigeria has c. 3.05 Ga Archaean crust but no known Palaeoproterozoic rocks >2.0 Ga; in NE Brazil, 2.6–3.5 Ga Archaean rocks form small cores within Palaeoproterozoic gneiss terrains affected by plutonism at c. 2.17 Ga. Both regions exhibit Late Palaeoproterozoic (c. 1.8 Ga) rift-related magmatism and metasedimentary sequences overlying the basement. The Seridó Group of NE Brazil (<0.65 Ga) is similar to the Igarra Sequence in SW Nigeria. The Ceará Group, which may date back to c. 0.85 Ga, is a passive margin deposit on crust thinned during initiation of an oceanic domain. In both provinces, basement and sedimentary cover were involved in tangential tectonics that resulted in crust-thickening by nappe-stacking associated with closure of this ocean. Frontal collision between c. 0.66 and 0.60 Ga later evolved to an oblique collision, generating north–south continental strike-slip shear zones at c. 0.59 Ga. In NE Brazil, the main Pan-African suture is probably buried beneath the Parnaíba Basin. The Transbrasiliano Lineament, interpreted as the prolongation of the Kandi–4°50 Lineament in Hoggar, may represent a cryptic suture.
West Gondwana: Pre-cenozoic correlations across the south atlantic region

hal-00412234
https://hal.archives-ouvertes.fr/hal-00412234
DOI : 10.1144/SP294.4

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : This paper presents the background for the calculation of physical properties of an aggregate from constituent crystal properties and the texture of the aggregate in a coherent manner. Emphasis is placed on the important tensor properties of 2nd and 4th rank with applications in rock deformation, structural geology, geodynamics and geophysics. We cover texture information that comes from pole figure diffraction and single orientation measurements (electron backscattered diffraction or EBSD, electron channelling pattern, Laue pattern, optical microscope universal-stage). In particular, we provide explicit formulae for the calculation of the averaged tensor from individual orientations or from an orientation distribution function (ODF). For the latter we consider numerical integration and an approach based on the expansion into spherical harmonics. This paper also serves as a reference paper for the mathematical tensor capabilities of the texture analysis software MTEX, which is a comprehensive, freely available MatLab toolbox that covers a wide range of problems in quantitative texture analysis, for example, ODF modelling, pole figure to ODF inversion, EBSD data analysis and grain detection. MTEX offers a programming interface which allows the processing of involved research problems as well as highly customizable visualization capabilities; MTEX is therefore ideal for presentations, publications and teaching demonstrations.
Deformation Mechanisms, Rheology and Tectonics: Microstructures, Mechanics and Anisotropy

hal-00688833
https://hal.archives-ouvertes.fr/hal-00688833

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The mylonitic Cambrian quartzites, Moine Thrust Zone, NW Scotland, have long been used to study microstructural and petrofabric evolution and to develop understanding of grain-scale processes accommodating large-scale displacements. Today, structural geology is entering a new age of understanding of the basic processes involved in microstructural evolution due to the emergence of novel instrumental techniques and theoretical models. It seems apposite therefore to re-evaluate the microstructure of one example of this classic quartz mylonite from the Stack of Glencoul, Assynt, using arguably the most important of these new techniques, electron backscattered diffraction (EBSD). The three-dimensional (3D) microstructure and petrofabric of this rock was analysed using EBSD, to: 1) corroborate previous optical and X-ray texture goniometry measurements; 2) investigate the potential for sampling and/or tectonic sectioning bias that may be introduced inadvertently into any petrofabric analysis; and 3) predict its seismic properties. It is found that microstructures do differ between orthogonal structural sections, leading to variations in strengths of different components in the overall petrofabric that might impact on seismic properties. The results emphasize the true 3D nature of microstructures and petrofabrics, which can be recognized and accommodated more readily by this new generation of analytical techniques.
Continental Tectonics and Mountain Building: The Legacy of Peach and Horne

hal-00565749
https://hal.archives-ouvertes.fr/hal-00565749