Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We have investigated the seismic anisotropy from SKS and SKKS wave splitting along a N-S profile perpendicular to the Pyrenean mountain belt. The line crossed the North Pyrenean Fault (NPF), which probably represents the plate boundary between the European and the Iberian plates. We observed large delay times δt (1.3 to 1.5 s) and uniform fast polarization directions ϕ (N100E) at three stations located on the Iberian plate. On the other hand, δt are smaller (0.5–1.0 s) and the ϕ scattered at stations located north of the NPF. The small scale variability, the relation with surface geology and the correlation of the δt with lithospheric thickness suggest that the anisotropy could be predominantly of lithospheric origin. However, an asthenospheric contribution cannot be ruled out. In the North Pyrenean Zone, an important thermal event before the Pyrenean compression has likely erased the former mantle fabric. The observed anisotropy is then likely related to the Pyrenean orogeny. On the Iberian plate, our splitting parameters are similar to those obtained at two stations located on Hercynian structures in Central Spain. This suggests that two contributions are likely superposed to that of the Pyrenean built up: one related to the Hercynian orogeny and the other one related to the rotation of the Iberian plate.
ISSN: 0094-8276

hal-01389118
http://hal.univ-reunion.fr/hal-01389118
http://hal.univ-reunion.fr/hal-01389118/document
http://hal.univ-reunion.fr/hal-01389118/file/barruol_pyr_GRL1995.pdf
DOI : 10.1029/94GL03225

Éditeur(s) : HAL CCSD
Résumé : International audience
In the frame of the Africa-Europe convergence, the Mediterranean tectonic system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western Mediterranean is characterized by the exhumation of the largest subcontinental mantle massif worldwide (the Ronda Peridotite) and a narrow arcuate geometryacross the Gibraltar arc within the Betic-Rif belt (the internal part being called the Alboran domain), where the relationship between slab dynamics and surface tectonics is not well understood. New structural and geochronological data are used to argue for 1/ hyperstrechting of the continental lithosphere allowing extensional mantle exhumation to shallow depths, followed by 2/ lower miocene thrusting. Two Lower Miocene E-W-trending strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60°-trending thrusts and N140°-trending normal faults developed simultaneously during dextral strike-slip simple shear. The inferred continuous westward translation of the Alboran Domain is accommodated by a major E-W-trending lateral ramp (strike-slip) and a N60°-trending frontal thrust. At lithosphere-scale, we interpret the observed deformation pattern as the upper-plate expression of a lateral slab tear and of its westward propagation since Lower Miocene. The crustal emplacement of the Ronda Peridotites occurred at the onset of this westward motion.The Miocene tectonics of the western Alboran is therefore marked by the inversion of a continental rift, triggered by shortening of the upper continental plate and accommodated by E-W dextral strike-slip corridors. During thrusting and westward displacement of the Alboran domain with respect to Iberia, the hot upper plate, which involved the previously exhumed sub-continental mantle, underwent fast cooling.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242043
https://hal-insu.archives-ouvertes.fr/insu-01242043

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We have analyzed shear wave splitting recorded by portable and permanent broadband and long-period stations located in the eastern United States. Teleseismic shear waves (SKS, SKKS, and PKS) were used to retrieve the splitting parameters: the orientation of the fast wave polarization plane ϕ and the delay time δt. In total, 120 seismic events were processed, allowing for more than 600 splitting measurements. Within the Appalachians, stations located in the western (external) part are characterized by δt≈1s and ϕ trending N50°– 70°E in the south and central regions and N30°–40°E in the north, closely following the trend of the orogenic belt in these areas. The transition region between north and central is characterized by δt≈1–1.3 s and by E-W trending ϕ that are at a high angle to the regional geologic trend. Measurements at two stations located in the eastern (internal) part of the belt indicate very weak anisotropy. The large-scale pattern of anisotropy is not consistent with that predicted for simple asthenospheric flow beneath the plate. Splitting along the southern and eastern margins of the continent is consistent with that expected for Grenvillian deformation, an alternative model of asthenospheric flow around the cratonic keel cannot be ruled out. Within the cratonic core, the correlation between δt and lithospheric thickness suggests a lithospheric anisotropy. Smaller-length-scale variations also argue for a significant contribution of lithospheric structures. The fabric responsible for shear wave splitting may have formed during tectonic episodes that affected the eastern United States, i.e., the Grenville and Appalachian orogenies and the subsequent rifting of the North Atlantic Ocean. Our observations in the western Appalachians suggest that the anisotropy may be preserved since the Grenvillian orogeny. The absence of detectable splitting in the two stations in the eastern Appalachians is attributed to the igneous intrusions related to the Atlantic rifting. The measurements in the transition between the northern and central southern Appalachians, constitute an intriguing anomaly, whose E-W ϕ have little obvious relation to the regional surface geology. We suggest two possible causes: (1) the local dominance of asthenospheric flow, motivated by the proximity of a pervasive low-velocity anomaly and (2) lithospheric deformation in a transcontinental strike-slip fault zone active during the Appalachian collision.
ISSN: 2169-9313

hal-01388859
http://hal.univ-reunion.fr/hal-01388859
http://hal.univ-reunion.fr/hal-01388859/document
http://hal.univ-reunion.fr/hal-01388859/file/Barruol_JGR_1997.pdf
DOI : 10.1029/96JB03800

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Physical modeling of oblique subduction is performed to study the mechanism of strain partitioning. The model is two-layer and includes the elasto-plastic lithosphere (the overriding and subducting plates) and the low-viscosity liquid asthenosphere. The subduction is driven by a push force from a piston and a pull force when the density contrast Ap between the subducting plate and the asthenosphere is positive. We vary both Ap and the interplate friction (frictional stresses). Slip partitioning is obtained only in the models with high interplate friction and only when the overriding plate contains a weak zone. This zone in the models corresponds either to locally thinned litho-sphere or to cut (fault). The horizontal, trench-normal component of the interplate friction force [Ffh[ can be comparable with the absolute value of the horizontal component of the nonhydrostatic interplate pressure force [Fph [ in the subduction zone. Ffh is always negative (compression), while Fph can be either negative (compressional subduction regime) or positive (extensional regime). High friction, which promotes partitioning, can completely cancel the extensional (suction) force Fph. Back arc tension and strike-slip faulting appear thus as conflicting processes, although they can coexist in the same subduction zone, depending on the relative values of relevant forces. It appears that high friction can exist only in compressional subduction zones where partitioning should develop more easily. This conclusion is supported by the comparison of two oblique subduction zones, having similar geometry: the compressional southern Kurile zone (strong partitioning) and extensional southern Ryukyu zone (no lithospheric-scale partitioning). Other factors controlling the strain partitioning are the length of the oblique subductlon zone, the boundary conditions at the transverse limits of the forearc sliver, and of course, the obliquity of subduction.
ISSN: 2169-9275

hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396/document
https://hal.archives-ouvertes.fr/hal-01261396/file/chemendaJGR2000.pdf
DOI : 10.1029/1999JB900332

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We investigate upper mantle anisotropy beneath the Pyrenean range along three N-S profiles across the mountain belt. The results of a first profile that operated in 1993 in the central part of the belt have been presented elsewhere. We present the results of two other profiles that ran in 1995-1996 and 1996-1997 in the eastern and western part of the belt, respectively and propose an interpretation of the whole results. Teleseismic shear waves (SKS, SKKS, and PKS) are used to determine splitting parameters: the fast polarization direction φ and the delay time δt. Teleseismic shear wave splitting in the eastern Pyrenees displays homogeneous φ values trending N100°E and δt values in the range 1.1 to 1.5 s. A station located in the southern Massif Central, 100 km north of the range, is characterized by different splitting parameters (φ = N70°E, δt = 0.7 s). In the western part of the belt, anisotropy parameters are similar across the whole belt (φ = N110°E and δt = 1.3 to 1.5 s). Most of the measured delay times, including those obtained in the central part of the range, are above the global average of the SKS splitting (around 1 s). At the belt scale, φ is generally poorly correlated with recent estimations of the absolute plate motion, which predicts a fast direction ranging between N50°E and N80°E. Instead, the orientation of φ (N100°E) is parallel to the trend of the Pyrenean belt but also to Hercynian preexisting structures. This parallelism supports an anisotropy primarily related to frozen or active lithospheric structures. We show that a signature related to the Pyrenean orogeny is likely for the stations located in the internal domains of the belt. By contrast, the anisotropy measured at the stations located on the external parts of the belt could reflect a pre-Pyrenean (Hercynian) deformation. We suggest that a late Hercynian strike-slip deformation is responsible for this frozen upper mantle anisotropy and that the Pyrenean tectonic fabric developped parallel to this preexisting fabric. Finally, no particularly strong splitting is related to the North Pyrenean Fault, commonly believed to represent the plate boundary between Iberia and Eurasia.
ISSN: 2169-9313

hal-01388841
http://hal.univ-reunion.fr/hal-01388841
http://hal.univ-reunion.fr/hal-01388841/document
http://hal.univ-reunion.fr/hal-01388841/file/Barruol_Aniso_Pyr_JGR1998.pdf
DOI : 10.1029/98JB02790

Éditeur(s) : HAL CCSD
Résumé : International audience
The Aegean domain is a key area for understanding the processes of back-arc extension. Observed deformation pattern and present day kinematics result from the interaction between the southward retreat of the Hellenic trench and the westward escape of Anatolia. Using laboratory experiments designed to study lithosphere-scale deformation, we show that the overall pattern of Aegean extension requires not only the combination of trench retreat and Anatolia escape since 15 Ma but also the presence of an inherited lithosphere-scale mechanical discontinuity: the Vardar Suture Zone (VSZ). The reactivation in dextral shear of the eastern branch of the VSZ accommodates both the trench retreat (NS stretching) and the westward escape of Anatolia (EW shortening) in the Cyclades area since 15 Ma. Additionally, our model shows that the North Anatolian Fault (NAF) is a late structure in the evolution of the Aegean, initiated 10 Ma after the onset of Anatolia escape. The model displays displacement sub-domains, which result from strain partitioning instead of being “rigid microplates”, directly comparable to the present-day displacement field (GPS) of the Aegean and western Anatolia. Our modelling provides a simple way to look at the dynamics of Aegean extension in two main stages. From middle Eocene to middle Miocene, extension was only driven by the southward retreat of the Hellenic trench at a rate lower than 1 cm.y-1. Since middle Miocene, the combination of slab rollback with Anatolia westward escape, resulted in a southwest direction of trench retreat, with an accelerating rate of up to 3 cm.y-1.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242045
https://hal-insu.archives-ouvertes.fr/insu-01242045

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Analysis of the microstructures in the km-scale mantle shear zone that separates the northern and the central parts of the Lanzo peridotite massif provides evidence of an evolution in time and space of deformation processes accommodating shearing in the shallow mantle within an extensional setting. This shear zone displays an asymmetric distribution of deformation facies. From south to north, gradual reorientation of the foliation of coarse porphyroclastic plagioclase-bearing peridotites is followed by development of protomylonites, mylonites, and mm-scale ultramylonite bands. A sharp grain size gradient marks the northern boundary. Early deformation under near-solidus conditions in the south is recorded by preservation of weakly deformed interstitial plagioclase and almost random clinopyroxene and plagioclase crystal orientations. Feedback between deformation and melt transport probably led to melt focusing and strain weakening in the shear zone. Overprint of melt-rock reaction microstructures by solid-state deformation and decrease in recrystallized grain size in the protomylonites and mylonites indicate continued deformation under decreasing temperature. Less enriched peridotite compositions and absence of ultramafic dykes or widespread melt-impregnation microstructures north of the shear zone and clinopyroxene and amphibole enrichment in the mylonites and ultramylonites suggest that the shear zone acted as both a thermal barrier and a high-permeability channel for late crystallizing fluids. These observations, together with chemical data indicating faster cooling of central Lanzo relative to the northern body, corroborate that this shear zone is a mantle detachment fault. All deformation facies have crystal preferred orientations consistent with deformation by dislocation creep with dominant activation of the (010)[100] and (100)[001] systems in olivine and orthopyroxene, respectively. Dynamic recrystallization produces dispersion of olivine CPO but not a change of dominant deformation mechanism. Evidence for activation of grain boundary sliding is limited to mm-scale ultramylonite bands, where solid-state reactions produced very fine grained polymineralic aggregates. Except for these latest stages of deformation, strain localization does not result from the microstructural evolution; the grain size decrease is a consequence of the need to deform a rock volume whose strength continuously increases because of decreasing temperature conditions. Strain localization in the intermediate levels thus essentially results from the more localizing behavior of both the deep, partially molten, and shallow parts of this extensional shear zone distribution.
ISSN: 1525-2027

hal-00644844
https://hal.archives-ouvertes.fr/hal-00644844
DOI : 10.1029/2011GC003627

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Continental rifts and passive continental margins show fundamental along-axis segmentation patterns that have been attributed to one or a number of different processes: extensional fault geometry, variable stretching along strike, preexisting lithospheric compositional and structural heterogeneities, oblique rifting, and the presence or absence of eruptive volcanic centers. The length and width scales of the rift stage fault-bounded basin systems change during the late evolution of the new plate boundary, and the role of magmatism may increase as rifting progresses to continental rupture. Along obliquely spreading ridges, first-order mid-ocean ridge geometries originate during the synrift stage, indicating an intimate relationship between magma production and transform fault spacing and location. The Gulf of Aden rift is a young ocean basin in which the earliest synrift to breakup structures are well exposed onshore and covered by thin sediment layers offshore. This obliquely spreading rift is considered magma-poor and has several large-offset transforms that originated during late stage rifting and control the first-order axial segmentation of the spreading ridge. Widely spaced geophysical transects of passive margins that produce only isolated 2-D images of crust and uppermost mantle structure are inadequate for evaluation of competing rift evolution models. Using closely spaced new geophysical and geological observations from the Gulf of Aden we show that rift sectors between transforms have a large internal variability over short distances (∼10 km): the ocean-continent transition (OCT) evolves from a narrow magmatic transition to wider zones where continental mantle is probably exhumed. We suggest that this small-scale variability may be explained (1) by the distribution of volcanism and (2) by the along-strike differences in time-averaged extension rate of the oblique rift system. The volcanism may be associated with (1) the long-offset Alula-Fartak Fracture Zone, which may enhance magma production on its younger side, or (2) channeled flow from the Afar plume material along the newly formed OCT and the spreading ridge. Oblique extension and/or hot spot interactions may thereby have a significant control on the styles of rifting and continental breakup and on the evolution of many magma-poor margins.
ISSN: 1525-2027

hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866/document
https://hal.archives-ouvertes.fr/hal-00504866/file/G3-Leroy_al-2010.pdf
DOI : 10.1029/2009GC002963

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We conducted triaxial compression experiments to investigate the effects of pressure, temperature and strain rate on the rheology of talc rocks. The tests were carried out at T from 25 to 860 degrees C, P from 0.1 to 300 MPa, and <(epsilon) over dot> from 0.3 to 30 x 10-5 s(-1). In addition to being very weak, there are other important differences between the mechanical behavior of talc and that of most other silicates. Deformation at all temperatures up to dehydration was accommodated by a combination of crystal plasticity, frictional sliding, and cataclasis. A transition from localized to distributed deformation occurred at P = 300 MPa and T = 400 degrees C, but this transition is ill-defined as both distributed and localized deformation were observed at P = 300 MPa and T = 600 degrees C. Unlike most silicates, both the coefficient of internal friction and the coefficient of (sliding) friction are very low and nearly equal to each other. Temperature enhances plastic deformation (kinking), and inter- and intra-granular microcracks are observed parallel to the (001) planes at all conditions. Voids are created by delamination along (001) planes at kink-band boundaries. Full crystal plasticity was not achieved under any of the conditions tested, i.e., the von Mises criterion was never satisfied. However, the strength of the aggregates remained much less than the confining pressure. These unusual properties are likely a manifestation of the pronounced mechanical anisotropy of talc at the grain scale. At T >= 750 degrees C dehydration is observed, but only along shear zones. These results suggest that feedbacks between deformation and reaction kinetics could control fluid flow in fault zones. The presence of talc can promote significant weakening and strain localization in the oceanic lithosphere, the subducting plate and the overlying mantle wedge. (c) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00492706
https://hal.archives-ouvertes.fr/hal-00492706
DOI : 10.1016/j.epsl.2008.02.004