Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Superposed to ductile syn-metamorphic deformations, post-foliation deformations affect metamorphic units during their exhumation. Understanding the role of such deformations in the structuration of metamorphic units is key for understanding the tectonic evolution of convergence zones. We characterize post-foliations deformations using 3D modelling which is a first-order tool to describe complex geological structures, but a challenging task where based only on surface data. We propose a modelling procedure that combines fast draft models (interpolation of orientation data), with more complex ones where the structural context is better understood (implicit modelling), allowing us to build a 3D geometrical model of Syros Island blueschists (Cyclades), based on field data. With our approach, the 3D model is able to capture the complex present-day geometry of the island, mainly controlled by the su-perposition of three types of post-metamorphic deformations affecting the original metamorphic pile: i) a top-to-South ramp-flat extensional system that dominates the overall island structure, ii) large-scale folding of the metamorphic units associated with ramp-flat extensional system, and iii) steeply-dipping normal faults trending dominantly NNW-SSE and EW. The 3D surfaces produced by this method match outcrop data, are geologically consistent, and provide reasonable estimates of geological structures in poorly constrained areas.
ISSN: 0191-8141

insu-01188400
https://hal-insu.archives-ouvertes.fr/insu-01188400
DOI : 10.1016/j.jsg.2015.07.002

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : New structural data and P-T estimates of syn-deformational assemblages within the Beni Bousera peridotites and their crustal envelope are used to explain their Alpine exhumation. The Beni Bousera peridotites occur as thin sheets within high grade crustal units of the lower Sebtides (inner Rif, Morocco) and are composed of weakly deformed spinel lherzolite in the core of the massif and garnet-spinel mylonite at the rim. The main foliation trajectories in both the peridotites and overlying crustal units show systematic rotation towards their mutual contact, indicating a kilometer-scale top to the NW shearing with a dextral component along this crust/mantle contact. Widespread top to the NW shear criteria within the crustal units overlying the peridotite support this feature. Available ages constrain the development of the main foliation in both the peridotites and crustal rocks between 25 and 20 Ma. New P-T data from the peridotites show that deformation occurs during decompression from approximate to 22 kbar, 1050 degrees C to approximate to 9-15 kbar, 800 degrees C. As a consequence, exhumation of the Beni Bousera peridotites takes place during the Oligo-Miocene lithosphere thinning in the footwall of a lithospheric extensional shear zone. The exceptional preservation of garnet within the mylonitic peridotites results from rapid cooling of the border of the massif due to the juxtaposition with colder crustal rocks along this shear zone. Uplifting of the hot mantle rocks simultaneously induces high temperature metamorphism in the overlying crustal units. These new findings allow us to reconstruct the deformation history of the Beni Bousera region and the Alboran domain in the framework of the western Mediterranean geodynamics during the last 40 Myrs.. (C) 2011 Lavoisier SAS. All rights reserved
ISSN: 0985-3111

hal-00767654
https://hal.archives-ouvertes.fr/hal-00767654
DOI : 10.3166/ga.24.49-60

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cycladic Blueschist Unit (CBU) represents the northern passive margin of the Adria continental block and ophiolites that are the remnants of the Pindos Ocean, which were affected by high pressure-low temperature metamorphism in the blueschist and eclogite facies during the Eocene. Prior to the Lutetian, the ophiolitic and margin units were thrust towards the SW inside a NE-dipping subduction zone. Two subsequent exhumation stages are characterized by top-to-the-NE senses of shear: i) from mantle depths to lower crustal levels, before 37 Ma, which was accommodated by an extensional inversion of the Vardar suture zone, and ii) from deep crustal levels to the near-surface, between 30 and 20 Ma, which was accommodated by the North Cycladic Detachment. It is during this late stage of ductile exhumation that the central Cyclades Core Complex was exhumed. Segmentation of the CBU by normal faults started at 12 Ma, as recorded by the low temperature thermochronometers, and was coeval with block rotation and folding with NS-trending axes, which were predominantly controlled by the Myrthes-Ikaria strike-slip fault in the centre of the Cyclades. A map restoration of the CBU geometry, prior to segmentation, has been carried out using available structural and paleomagnetic data. The restoration shows that, following the CBU exhumation from mantle depths to crustal levels, a single core complex was exhumed along a single NE dipping detachment.
ISSN: 0040-1951

insu-00672320
https://hal-insu.archives-ouvertes.fr/insu-00672320
DOI : 10.1016/j.tecto.2011.12.025

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Lawsonite pseudomorphs are used to identify and distinguish the kinematic records of subduction and exhumation in blueschist-facies rocks from Syros (Cyclades; Greece). Lawsonite is a hydrous mineral that crystallizes at high-pressure and low-temperature conditions. During decompression, lawsonite is typically pseudomorphed by an aggregate dominated by epidote and paragonite. Such aggregates are easily deformable and if deformation occurs after the lawsonite breakdown, the pseudomorphs are difficult to distinguish from the matrix. The preservation of the lawsonite crystal shape, despite complete retrogression, indicates therefore that the host blueschist rock has not been affected by penetrative deformation during exhumation, thus providing indication of strain-free conditions. Therefore, tracking the lawsonite growth and destabilization along the P-T path followed by the rocks during a subduction/exhumation cycle provides information about the subduction/exhumation-related deformation. Using microstructural observations and P-T pseudosections calculated with thermocalc, it is inferred that top-to-the-south sense of shear preserved in lawsonite pseudomorph-bearing blueschists on Syros occurred during the prograde metamorphic path within the lawsonite stability field, and is therefore associated with subduction. On the contrary, the deformation with a top-to-the-north sense of shear is observed in surrounding rocks, where lawsonite pseudomorphs are deformed or apparently lacking. This deformation occurred after the lawsonite breakdown during exhumation. At the regional scale, exhumation-related deformation is heterogeneous, allowing the preservation of lawsonite pseudomorphs in significant volumes of blueschists of the central and southern Cyclades. It is argued that such successive shearing deformation events with opposite senses more likely correspond to an exhumation process driven by slab rollback, in which subduction and exhumation are not synchronous
ISSN: 0263-4929

insu-00841214
https://hal-insu.archives-ouvertes.fr/insu-00841214
DOI : 10.1111/jmg.12035

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the geodynamic evolution of the Aegea-Anatolia region and discuss strain localisation there over geological times. From Late Eocene to Present, crustal deformation in the Aegean backarc has localised progressively during slab retreat. Extension started with the formation of the Rhodope Metamorphic Core Complex (Eocene) and migrated to the Cyclades and the northern Menderes massif (Oligocene and Miocene), accommodated by crustal-scale detachments and a first series of core complexes (MCCs). Extension then localised in Western Turkey, the Corinth Rift and the external Hellenic arc after Messinian times, while the North Anatolian Fault penetrated the Aegean Sea. Through time the direction and style of extension have not changed significantly except in terms of localisation. The contributions of progressive slab retreat and tearing, basal drag, extrusion tectonics and tectonic inheritance are discussed and we favour a model (1) where slab retreat is the main driving engine, (2) successive slab tearing episodes are the main causes of this stepwise strain localisation and (3) the inherited heterogeneity of the crust is a major factor for localising detachments. The continental crust has an inherited strong heterogeneity and crustal-scale contacts such as major thrust planes act as weak zones or as zones of contrast of resistance and viscosity that can localise later deformation. The dynamics of slabs at depth and the asthenospheric flow due to slab retreat also have influence strain localisation in the upper plate. Successive slab ruptures from the Middle Miocene to the Late Miocene have isolated a narrow stripe of lithosphere, still attached to the African lithosphere below Crete. The formation of the North Anatolian Fault is partly a consequence of this evolution. The extrusion of Anatolia and the Aegean extension are partly driven from below (asthenospheric flow) and from above (extrusion of a lid of rigid crust).
ISSN: 0040-1951

insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950/document
https://hal-insu.archives-ouvertes.fr/insu-00715950/file/Jolivet-Aegean_Tectonophysics-2012.pdf
DOI : 10.1016/j.tecto.2012.06.011

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The lateral variation of the mechanical properties of continental lithosphere is an important factor controlling the localization of deformation and thus the deformation history and geometry of intraplate mountain belts. A series of three-layer lithospheric-scale analog models, with a strong domain (SD) embedded at various depths, are presented to investigate the development of topography and deformation patterns by having lateral heterogeneities within a weak continental lithosphere. The experiments, performed at a constant velocity and under normal gravity, indicate that the presence or absence of the SD controls whether deformation is localized or distributed at a lithospheric scale. Deformation and topography localize above the edges of the SD, while the SD region itself is characterized by minor amounts of surficial deformation and topography. The depth of the SD (within the ductile crust, ductile mantle lithosphere, or both) controls the pattern of deformation and thus the topography. The presence of a SD in the ductile crust or in the mantle results in limited surficial topographic effects but large variations in the Moho topography. Strong Moho deflection occurs when the SD is in the ductile crust, while the Moho remains almost flat when the SD is in the mantle. When the SD occupies the ductile lithosphere, the SD is tilted. These analog experiments provide insights into intraplate strain localization and could in particular explain the topography around the Tarim Basin, a lithospheric-scale heterogeneity north of the India-Asia collision zone.
ISSN: 0278-7407

hal-01172472
https://hal.archives-ouvertes.fr/hal-01172472
DOI : 10.1002/2014TC003756

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Aegean domain is a key area for understanding the processes of back-arc extension. Observed deformation pattern and present day kinematics result from the interaction between the southward retreat of the Hellenic trench and the westward escape of Anatolia. Lithosphere-scale analogue models were employed to display that the overall pattern of Aegean extension requires not only the combination of trench retreat and Anatolia escape since middle Miocene but also the presence of an inherited lithosphere-scale mechanical discontinuity: the Vardar Suture Zone (VSZ). The reactivation in dextral shear of the eastern branch of the VSZ accommodates both the trench retreat (NS stretching) and the westward escape of Anatolia (EW shortening) in the Cyclades area since middle Miocene. Additionally, our model shows that the North Anatolian Fault (NAF) is a late structure in the evolution of the Aegean, initiated around 10 Ma after the onset of Anatolia escape. The displacement field at the surface of the model allows the identification of sub-domains, which result from strain partitioning instead of being "rigid microplates", directly comparable to the present-day displacement field (GPS) of the Aegean and western Anatolia. Our model provides a simple but powerful way to look at the dynamics of Aegean extension in two main stages. From middle Eocene to middle Miocene, extension was only driven by the southward retreat of the Hellenic trench at a rate lower than 1 cm*y− 1. Since middle Miocene, the combination of slab rollback with Anatolia westward escape resulted in a southwest direction of trench retreat, with an accelerating rate of up to 3 cm*y− 1.
ISSN: 0040-1951

insu-01066042
https://hal-insu.archives-ouvertes.fr/insu-01066042
https://hal-insu.archives-ouvertes.fr/insu-01066042/document
https://hal-insu.archives-ouvertes.fr/insu-01066042/file/Philippon-brun-tect-2014-HAL.pdf
DOI : 10.1016/j.tecto.2014.04.039

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Vertiskos Unit of northern Greece is an elongated basement belt with a complex poly-metamorphic history. It extends from Greece (Chalkidiki peninsula), to the south, up to Serbia, in the north, and arguably represents the westernmost part of the Rhodope Metamorphic Province (northern Greece to southern Bulgaria). The Vertiskos Unit experienced a medium pressure lower amphibolite-facies metamorphic overprint during the Alpine Orogeny. The available medium-temperature geochronology implies that it remained at temperature of approximately 300°C (or slightly higher) during Lower Cretaceous. In order to constrain its post-Lower Cretaceous thermal history, until near-surface exposure, we applied apatite fission track analysis. The central ages obtained range from 68.5 ± 3.8 to 46.6 ± 3.6 Ma (uppermost Cretaceous to Middle Eocene) and mean track lengths between 13 and 13.5 μm. We applied two inverse thermal modeling approaches using either each sample independently (high degree of freedomin the thermal history, better data fit) or all samples together interpreting them as a vertical profile (simpler thermal history, worse data fit). Irrespective of the modeling approach, we conclude that the bulk thermal history of the Vertiskos Unit crosses the high-temperature limit of the apatite partial annealing zone by the uppermost Cretaceous and reaches near-surface conditions as early as lower/middle Eocene. These results contrast with the thermal history of the other domains of the Rhodope Metamorphic Province further east (namely the Southern Rhodope Core Complex and the Northern Rhodope Complex) and establish the Vertiskos basement complex as the oldest exhumed coherent basement fragment of the Rhodope Metamorphic Province and Greece.
ISSN: 0278-7407

insu-01053579
https://hal-insu.archives-ouvertes.fr/insu-01053579
https://hal-insu.archives-ouvertes.fr/insu-01053579/document
https://hal-insu.archives-ouvertes.fr/insu-01053579/file/Kydonakis-brun-tectonics-2014.pdf
DOI : 10.1002/2014TC003572

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
The Alboran Domain, situated at the western end of the Mediterranean subductionsystem, is characterized by the Ronda Peridotites, one of the world largest exposures of subcontinental mantle. Using U-Pb (LA-ICP-MS) and Ar-Ar dating, we precisely dated twotectonic events associated with the Tertiary exhumation of the Ronda Peridotites. First,shearing along the Crust-Mantle Extensional Shear Zone caused, at ca. 22.5 Ma, mantleexhumation, local partial melting in the deep crust and coeval cooling in the upper crust.Second, the Ronda Peridotites Thrust triggered the final crustal emplacement of theperidotites onto the continental crust at ca. 21 Ma, as testified by granitic intrusions in thethrust hanging-wall. The tectonic evolution of the western Alboran Domain is thereforecharacterized by a fast switch from a continental lithosphere extension in a backarc setting,with sub-continental mantle exhumation, to a rift inversion by thrusting driven by shorteningof the subduction upper plate
ISSN: 0954-4879

insu-01441962
https://hal-insu.archives-ouvertes.fr/insu-01441962
https://hal-insu.archives-ouvertes.fr/insu-01441962/document
https://hal-insu.archives-ouvertes.fr/insu-01441962/file/Frasca-TerraNova-2017.pdf
DOI : 10.1111/ter.12255

Éditeur(s) : HAL CCSD
Résumé : International audience
The strength of the lithospheric mantle controls the mode of lithosphere deformation: the presence or absence ofa high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysicaldata question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling toquantify the impact of a ductile localizing mantle – instead of brittle – in triggering continental rifting. As a novelty,the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction,which may promote a significant strength drop and subsequent strain localization at low mantle temperature (<700-800°C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting thatmainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. Amedium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding tonarrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductilelocalizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at largestrain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting,although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geologicaland mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustalfaulting that are commonly observed in nature.
EGU General Assembly 2014
Vienne, Austria

insu-01565161
https://hal-insu.archives-ouvertes.fr/insu-01565161

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep-seated gravitational spreading (DSGS) affects the slopes of formerly glaciated mountain ridges. On Mars, DSGS has played a key role in shaping the landforms of the giant Valles Marineris troughs. Though less spectacular, DSGS is common in terrestrial orogens, where understanding its mechanics is critical in the light of the ongoing climate change because it is a potential source of catastrophic landslides in deglaciated valleys. We conducted parametric numerical studies in order to identify important factors responsible for DSGS initiation. DSGS models are computed using an elastoviscoplastic finite element code. Using ADELI's software, we reproduce topographic ridge spreading under the effect of valley unloading. Two types of spreading topographic ridges are investigated, homogeneous or with horizontal rheological layering. We find that gravitational instabilities are enhanced by high slopes, which increase gravitational stress, and low friction and cohesion, which decrease yield stress. In the unlayered ridge, instability is triggered by glacial unloading with plastic strain concentration inside the ridge and at the base of the high slopes. Vertical fractures develop in the upper part of the slope, potentially leading to fault scarps. Ridge homogeneity promotes a deformation mode controlled by uphill-facing normal faulting and basal bulging. In the second case, the ridge encompasses horizontal geological discontinuities that induce rock mass anisotropy. Discontinuity located at the base of the slope accumulates plastic strain, leading to the formation of a sliding plane evolving into a landslide. The presence of a weak layer at ridge base therefore promotes another slope deformation mode ending up with catastrophic failure. Mechanical conditions and slope height being equal, these conclusions can probably be extrapolated to Earth. Compared with Mars, DSGS on Earth is inhibited because terrestrial topographic gradients are lower than in Valles Marineris, an effect counterbalanced by increased gravitational stress, where the intensity of deformation is enhanced because of the Earth gravity potential.
ISSN: 0169-555X

hal-01420007
https://hal.archives-ouvertes.fr/hal-01420007
DOI : 10.1016/j.geomorph.2016.06.011

Éditeur(s) : HAL CCSD
Résumé : International audience
EGU General Assembly 2014
Vienne, Austria

insu-01113704
https://hal-insu.archives-ouvertes.fr/insu-01113704

Éditeur(s) : HAL CCSD
Résumé : International audience
Aegean extension is a process driven by slab rollback that, since 45 Ma, shows a twostage evolution. From Middle Eocene to Middle Miocene it is accommodated by localized deformation leading to i) the exhumation of high-pressure metamorphic rocks from mantle to crustal depths, ii) the exhumation of high-temperature rocks in core complexes and iii) the deposition of Paleogene sedimentary basins. Since Middle Miocene, extension is distributed over the whole Aegean domain giving a widespread development of onshore and offshore Neogene sedimentary basins. We reconstructed this two-stage evolution in 3D at Aegean scale by using available ages of metamorphic and sedimentary processes, geometry and kinematics of ductile deformation, paleomagnetic data and available tomographic models. The restorationmodel shows that the rate of trench retreat was around 0.6 cm/y during the first 30 My and then accelerated up to 3.2 cm/y during the last 15 My. The sharp transition observed in the mode of extension, localized versus distributed, which occurred in Middle Miocene correlates with the acceleration of trench retreat and is more likely a consequence of the Hellenic slab tearing documented by mantle tomography. The development of large dextral NE-SW strike-slip faults during the second stage of Aegean extension, since Middle Miocene, is illustrated by the 450 Km-long fault, recently put in evidence, offshore from Myrthes to Ikaria and onshore from Izmir to Balikeshir, in western Anatolia. Therefore, the interaction between the Hellenic trench retreat and the westward displacement of Anatolia started in Middle Miocene,almost 10 Ma before the propagation of the North Anatolian Fault in the North Aegean. This raises a fundamental issue concerning the dynamic relationship between slab tearing and Anatolia displacement
ISSN: 0438-9557

insu-01574659
https://hal-insu.archives-ouvertes.fr/insu-01574659
https://hal-insu.archives-ouvertes.fr/insu-01574659/document
https://hal-insu.archives-ouvertes.fr/insu-01574659/file/EFFECTS_OF_SLAB_ROLLBACK_ACCELERATION_ON_AEGEAN_EX.pdf
DOI : 10.12681/bgsg.11697

Éditeur(s) : HAL CCSD
Résumé : International audience
XI International Eclogite Conference 2015
Saint-Domingue, Dominica

insu-01117718
https://hal-insu.archives-ouvertes.fr/insu-01117718

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Much debate exists concerning the strength distribution of the continental lithosphere, how it controls lithosphere-scale strain localization and hence enables plate tectonics. No rheological model proposed to date is comprehensive enough to describe both the weakness of plate boundary and rigid-like behaviour of plate interiors. Here we show that the duality of strength of the lithosphere corresponds to different stages of microstructural evolution. Geological constraints on lithospheric strength and large strain numerical experiments reveal that the development of layers containing weak minerals and the onset of grain boundary sliding upon grain size reduction in olivine cause strain localisation and reduce strength in the crust and subcontinental mantle, respectively. The positive feedback between weakening and strain localization leads to the progressive development of weak plate boundaries while plate interiors remain
ISSN: 0040-1951

insu-00949213
https://hal-insu.archives-ouvertes.fr/insu-00949213
https://hal-insu.archives-ouvertes.fr/insu-00949213/document
https://hal-insu.archives-ouvertes.fr/insu-00949213/file/Gueydan_et_al_2014.pdf
DOI : 10.1016/j.tecto.2014.02.005

Éditeur(s) : HAL CCSD National Research Council Canada
Résumé : International audience
Back-arc extension in the Aegean, which was driven by slab rollback since 45 Ma, is described here for the first time in two stages. From Middle Eocene to Middle Miocene, deformation was localized leading to i) the exhumation of high-pressure metamorphic rocks to crustal depths, ii) the exhumation of high-temperature metamorphic rocks in core complexes and iii) the deposition of sedimentary basins. Since Middle Miocene, extension distributed over the whole Aegean domain controlled the deposition of onshore and offshore Neogene sedimentary basins. We reconstructed this two-stage evolution in 3D and four steps at Aegean scale by using available ages of metamorphic and sedimentary processes, geometry and kinematics of ductile deformation, paleomagnetic data and available tomographic models. The restoration model shows that the rate of trench retreat was around 0.6 cm/y during the first 30 My and then accelerated up to 3.2 cm/y during the last 15 My. The sharp transition observed in the mode of extension, localized versus distributed, in Middle Miocene correlates with the acceleration of trench retreat and is likely a consequence of the Hellenic slab tearing documented by mantle tomography. The development of large dextral NE-SW strike-slip faults, since Middle Miocene, is illustrated by the 450 Km-long fault zone, offshore from Myrthes to Ikaria and onshore from Izmir to Balikeshir, in western Anatolia. Therefore, the interaction between the Hellenic trench retreat and the westward displacement of Anatolia started in Middle Miocene, almost 10 Ma before the propagation of the North Anatolian Fault in the North Aegean.
ISSN: 0008-4077

insu-01271296
https://hal-insu.archives-ouvertes.fr/insu-01271296
https://hal-insu.archives-ouvertes.fr/insu-01271296/document
https://hal-insu.archives-ouvertes.fr/insu-01271296/file/Brun%20etal%20CJES%202016.pdf
DOI : 10.1139/cjes-2015-0203

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the framework of the Africa-Europe convergence, the Mediterranean system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western end of the system shows a narrow arcuate geometry across the Gibraltar arc, the Betic-Rif belt, in which the relationship between slab dynamics and surface tectonics is not well understood. The present study focuses on the Western Betics, which is characterized by two major thrusts: 1/ the Internal/External Zone Boundary limits the metamorphic domain (Alboran Domain) from the fold-and-thrust belts in the External Zone; 2/ the Ronda Peridotites Thrust allows the juxtaposition of a strongly attenuated lithosphere section with large bodies of sub-continental mantle rocks on top of upper crustal rocks. New structural data show that two major E-W strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60 thrusts and N140 normal faults developed simultaneously during dextral strike-slip simple shear. Olistostromic sediments of Lower Miocene age were deposited and deformed in this tectonic context and hence provide an age estimate for the inferred continuous westward translation of the Alboran Domain that is accommodated by an E-W lateral (strike-slip) ramp and a N60 frontal thrust. The crustal emplacement of large bodies of sub-continental mantle may occur at the onset of this westward thrusting in the Western Alboran domain. At lithosphere-scale, we interpret the observed deformation pattern as the subduction upper-plate expression of a lateral slab tear and its westward propagation since Lower Miocene.
ISSN: 0040-1951

insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695/document
https://hal-insu.archives-ouvertes.fr/insu-01163695/file/Frasca-2015.pdf
DOI : 10.1016/j.tecto.2015.05.017

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We use lithospheric-scale analog models to study the reactivation of pre-existing heterogeneities under oblique shortening and its relation to the origin of arcuate orogens. Reactivation of inherited rheological heterogeneities is an important mechanism for localization of deformation in compressional settings and consequent initiation of contractional structures during orogenesis. However, the presence of an inherited heterogeneity in the lithosphere is in itself not sufficient for its reactivation once the continental lithosphere is shortened. The heterogeneity orientation is important in determining if reactivation occurs and to which extent. This study aims at giving insights on this process by means of analog experiments in which a linear lithospheric heterogeneity trends with various angles to the shortening direction. In particular, the key parameter investigated is the orientation (angle α) of a strong domain (SD) with respect to the shortening direction. Experimental results show that angles α ≥ 75° (high obliquity) allow for reactivation along the entire SD and the development of a linear orogen. For α ≤ 60° (low obliquity) the models are characterized by the development of an arcuate orogen, with the SD remaining partially non-reactivated. These results provide a new mechanism for the origin of some arcuate orogens, in which orocline formation was not driven by indentation or subduction processes, but by oblique shortening of inherited heterogeneities, as exemplified by the Ouachita orogen of the southern U.S.
ISSN: 0278-7407

insu-01498544
https://hal-insu.archives-ouvertes.fr/insu-01498544
https://hal-insu.archives-ouvertes.fr/insu-01498544/document
https://hal-insu.archives-ouvertes.fr/insu-01498544/file/Calignano_et_al-2017-Tectonics.pdf
DOI : 10.1002/2016TC004424

Éditeur(s) : HAL CCSD
Résumé : International audience
In the frame of the Africa-Europe convergence, the Mediterranean tectonic system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western Mediterranean is characterized by the exhumation of the largest subcontinental mantle massif worldwide (the Ronda Peridotite) and a narrow arcuate geometryacross the Gibraltar arc within the Betic-Rif belt (the internal part being called the Alboran domain), where the relationship between slab dynamics and surface tectonics is not well understood. New structural and geochronological data are used to argue for 1/ hyperstrechting of the continental lithosphere allowing extensional mantle exhumation to shallow depths, followed by 2/ lower miocene thrusting. Two Lower Miocene E-W-trending strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60°-trending thrusts and N140°-trending normal faults developed simultaneously during dextral strike-slip simple shear. The inferred continuous westward translation of the Alboran Domain is accommodated by a major E-W-trending lateral ramp (strike-slip) and a N60°-trending frontal thrust. At lithosphere-scale, we interpret the observed deformation pattern as the upper-plate expression of a lateral slab tear and of its westward propagation since Lower Miocene. The crustal emplacement of the Ronda Peridotites occurred at the onset of this westward motion.The Miocene tectonics of the western Alboran is therefore marked by the inversion of a continental rift, triggered by shortening of the upper continental plate and accommodated by E-W dextral strike-slip corridors. During thrusting and westward displacement of the Alboran domain with respect to Iberia, the hot upper plate, which involved the previously exhumed sub-continental mantle, underwent fast cooling.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242043
https://hal-insu.archives-ouvertes.fr/insu-01242043

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Chalkidiki Peninsula of northern Greece a thrust complex made of a basement (Vertiskos Unit), a cover (Circum–Rhodope belt) and arc/back-arc units (Chortiatis Magmatic Suite and eastern Vardar Ophiolites) is exposed in the Chalkidiki Peninsula of northern Greece. The complex forms the western part of the Rhodope Metamorphic Province and lies on the hanging-wall of the Kerdylion Detachment, the structure responsible for the exhumation of the Southern Rhodope Core Complex and the most prominent and visible ductile structure related to the Tertiary Aegean extension. The Chalkidiki thrust complex arguably preserves a complete record of Cretaceous deformation and related fabrics. In this contribution we describe the geometry of foliation, stretching lineation and shear sense(s) on a regional scale. The regional foliation strikes NW–SE and displays different patterns in the three studied units: (i) dominantly dipping at low angle in the Vertiskos Unit, (ii) affected by upright folding in the Circum–Rhodope belt and (iii) systematically steeply dipping to the NE in the Chortiatis Magmatic Suite. Stretching lineation trend dominantly SW–NE in the three mentioned units. On the basis of new mapping, neglecting local perturbations and deformation related to Tertiary extension, we infer the regional kinematics of Cretaceous syn-metamorphic thrusting and subsequent exhumation of the metamorphic units. Thrusting took place toward the SW (in present-day coordination) and the related fabrics are recorded throughout the metamorphic pile. On the contrary, exhumation-related fabrics are related to shear toward the NE and are preferentially recorded in the uppermost part of the metamorphic pile suggesting that extension was more localised and of less finite intensity compared to thrusting.
ISSN: 0040-1951

insu-01231485
https://hal-insu.archives-ouvertes.fr/insu-01231485
DOI : 10.1016/j.tecto.2015.09.034