Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Correlations between major and minor transition elements in tectonically emplaced orogenic peridotites have been ascribed to variable degrees of melt extraction and melt–rock reaction processes, leading to depletion or refertilization. To elucidate how such processes are recorded in the subcontinental lithospheric mantle, we processed a large geochemical dataset for peridotites from the four tectono-metamorphic domains of the Beni Bousera orogenic massif (Rif Belt, northern Morocco). Our study reveals that variations in bulk-rock major and minor elements, Mg-number and modal mineralogy of lherzolites, as well as their clinopyroxene trace element compositions, are inconsistent with simple partial melting and mainly resulted from different reactions between melts and depleted peridotites. Up to 30% melting at < 3 GPa and cryptic metasomatism can account for the geochemical variations of most harzburgites. In Grt–Sp mylonites, melting and melt–rock reactions are masked by tectonic mixing with garnet pyroxenites and subsolidus re-equilibration. In the rest of the massif, lherzolites were mostly produced by refertilization of a refractory protolith (Mg-number ∼ 91, Ol ∼ 70%, Cpx/Opx = 0·4) via two distinct near-solidus, melt–rock reactions: (1) clinopyroxene and orthopyroxene precipitation and olivine consumption at melt/rock ratios <0·75 and variable mass ratio between crystallized minerals and infiltrated melt (R), which are recorded fairly homogeneously throughout the massif; (2) dissolution of orthopyroxene and precipitation of clinopyroxene and olivine at melt/rock ratios ≤1 and R = 0·2–0·3, which affected mainly the Ariègite–Seiland and Seiland domains. The distribution of secondary lherzolites in the massif suggests that the first refertilization reaction occurred prior to the differentiation of the Beni Bousera mantle section into petro-structural zones, whereas the second reaction was associated with the development of the tectono-metamorphic domains. Our data support a secondary, refertilization-related origin for most lherzolites in orogenic peridotite massifs.
ISSN: 0022-3530

hal-01526901
https://hal.archives-ouvertes.fr/hal-01526901
DOI : 10.1093/petrology/egx003

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We image the lithospheric and upper asthenospheric structure of western continental Yemen with 24 broadband stations to evaluate the role of the Afar plume on the evolution of the continental margin and its extent eastwards along the Gulf of Aden. We use teleseismic tomography to compute relative P-wave velocity variations in southwestern Yemen down to 300 km depth. Published receiver function analysis suggest a dramatic and localized thinning of the crust in the vicinity of the Red Sea and the Gulf of Aden, consistent with the velocity structure that we retrieve in our model. The mantle part of the model is dominated by the presence of a low velocity anomaly in which we infer partial melting just below thick Oligocene flood basalts and recent off-axis volcanic events (from 15 Ma to present). This low velocity anomaly could correspond to an abnormally hot mantle and could be responsible for dynamic topography and recent magmatism in western Yemen. Our new P-wave velocity model beneath western Yemen suggests the young rift flank volcanoes beneath margins and on the flanks of the Red Sea rift are caused by focused small-scale diapiric upwelling from a broad region of hot mantle beneath the area. Our work shows that relatively hot mantle, along with partial melting of the mantle, can persist beneath rifted margins after breakup has occurred.
ISSN: 1525-2027

hal-01015496
https://hal.archives-ouvertes.fr/hal-01015496
https://hal.archives-ouvertes.fr/hal-01015496/document
https://hal.archives-ouvertes.fr/hal-01015496/file/Korostelev_etal_GGG_2014.pdf
DOI : 10.1002/2014GC005316

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The Chaînons Béarnais ranges (North-Pyrenean Zone, west-central Pyrenees) display a fold-and-thrust structure involving the Mesozoic sedimentary cover, decoupled from its substratum at the Keuper evaporites level and associated with a few peridotite bodies and scarce Palaeozoic basement lenses. In the western part of the Chaînons Béarnais, the newly described recumbent fold of the Saraillé massif comprises a peridotite body and several lenses of Palaeozoic basement wrapped by the Triassic to Aptian sedimentary cover. This structure represents a remnant of the distal portion of the Pyrenean paleo-rifted margin where mantle rocks have been exhumed during Albian–Cenomanian times. In this paper, we present the first detailed mapping and microstructural analysis of the Saraillé massif, providing new geological basis for reconstructing the evolution of this part of the paleo-margin. Our mapping (i) shows that the pre-rift Mesozoic cover forms a recumbent fold cored by mantle and crustal rocks and (ii) confirms that the prerift cover was detached from its bedrock along a layer of Triassic evaporites and slid onto the exhumed mantle rocks. Sliding of the prerift cover was associated with extreme crustal thinning and mantle exhumation along a major detachment fault, together with intense metasomatism affecting both the continental basement and the sedimentary cover. We show for the first time (1) that the Mesozoic pre-rift sediments experienced syn-metamorphic ductile thinning during mantle exhumation, and (2) that during its extreme attenuation, the continental basement was reduced to tectonic lenses some ten meters thick by ductile shearing.
ISSN: 1631-0713

insu-01265777
https://hal-insu.archives-ouvertes.fr/insu-01265777
https://hal-insu.archives-ouvertes.fr/insu-01265777/document
https://hal-insu.archives-ouvertes.fr/insu-01265777/file/corre-CRGeosc-2016.pdf
DOI : 10.1016/j.crte.2015.11.007

Éditeur(s) : HAL CCSD Ocean Drilling Programm
Résumé : This paper provides a summary of postcruise scientific results from Ocean Drilling Program (ODP) Leg 209 available to date, building upon shipboard observations and syntheses summarized in the Leg 209 Initial Results volume. During Leg 209, 19 holes were drilled at 8 sites along the Mid-Atlantic Ridge from 14°43´ to 15°44´N, mainly in residual mantle peridotite intruded by gabbroic rocks, in order to understand the tectonic and structural processes responsible for formation of oceanic lithosphere with abundant residual peridotite exposed on the seafloor coupled with a relatively low proportion of volcanic rocks. Based on proportions of recovered lithologies, the entire area may be underlain by mantle peridotite with ~20%–40% gabbroic intrusions and impregnations. Impregnated peridotites with olivine + two pyroxenes + plagioclase + spinel that apparently formed in equilibrium probably record crystallization from primitive mid-ocean-ridge basalt at pressures of 0.5–0.6 GPa. Metamorphic equilibria record isobaric cooling to ~1100°C at this pressure. Thus, the conductively cooled thermal boundary layer beneath the Mid-Atlantic Ridge in this region is >15 km thick. Combined crystallization and reaction with residual peridotite formed a series of impregnated peridotites recording increasing Na content at nearly constant Mg#; this process could explain some of the variation in fractionation-corrected Na (e.g., Na = 8.0) observed in mid-ocean-ridge basalts. Clinopyroxene textures and compositions record such impregnation processes, and they are particularly well documented for Site 1274. Other Leg 209 gabbroic rocks formed from extensive crystallization of highly evolved melts, indicating that a substantial proportion of melt entering the thermal boundary layer crystallizes entirely beneath the seafloor, with no volcanic equivalent. Alteration of peridotites occurred over a range of temperatures and is the result of three distinct processes: rock-dominated serpentinization with formation of brucite in olivine-rich lithologies, fluid-dominated serpentinization with formation of magnetite and no brucite, and fluid-dominated talc alteration with addition of SiO2 as well as H2O and oxygen. The latter two processes also exhibit detectable trace element metasomatism that is distinct in its character from the igneous impregnation described in the previous paragraph. Microstructures show that most residual peridotites were not ductilely deformed at temperatures less than ~1200°C. Structural and paleomagnetic data require tectonic rotations of relatively undeformed blocks; some rotations probably exceeded 60° around nearly horizontal axes parallel to the rift axis. Rotations occurred along several generations of high-temperature mylonitic shear zones extending deeper than 15 km depth and numerous faults at lower temperature. Early formed shear zones and faults were passively rotated around later features; such a process could have produced low-angle fault surfaces without slip on low-angle faults. This region provides end-member examples of processes that are common at many or most slow-spreading ridges. Osmium isotope ratios indicate an ancient history of depletion for residual peridotites from the 14°–16°N region along the Mid-Atlantic Ridge. Though depleted Os isotope ratios in peridotite have been reported elsewhere along the global ridge system, the values from this region are among the most depleted. In general, Os isotope ratios from mid-ocean-ridge basalts are systematically more radiogenic than Os isotope ratios from ridge peridotite samples, suggesting a polygenetic heterogeneous source for mid-ocean-ridge basalts. Geochemical studies of zircons from Leg 209 gabbroic rocks and impregnated peridotites, together with other ridge and arc-related zircons, indicate that ridge zircons have systematically lower fractionation-corrected U and Th concentrations compared to arc zircons. This observation provides a tool for interpreting the tectonic provenance of ancient detrital zircons and indicates an arclike provenance for Hadean detrital zircons. Geobiological studies and aerobiological studies were also undertaken during Leg 209. The geobiological work found no measurable microbial enhancement of olivine dissolution rate, possibly because the samples from Leg 209 were sterile. The aerobiological study determined that dust from North Africa, collected from the derrick of the JOIDES Resolution during Leg 209, contains a variety of abundant microorganisms.
Proceedings ODP, scientific results, 209

hal-00407966
https://hal.archives-ouvertes.fr/hal-00407966
DOI : 10.2973/odp.proc.sr.209.001.2007

Éditeur(s) : HAL CCSD Elsevier
Résumé : In this study, I examine the strain modes of the forearc, arc and back-arc domains in arc-continent collisional settings leading to arc material subduction, delamination and/or accretion. The study focusses on two well-documented colliding island arcs: the Izu–Bonin–Mariana (IBM) arc in Japan and the Luzon arc in Taiwan, both carried by the Philippine Sea plate. Firstly, there is a body of evidence that both the IBM and the Luzon arcs were built on the same Late Jurassic to Early Cretaceous “proto-Philippine Sea Plate” crust. Their internal structure is thus more heterogeneous than expected from Paleogene or Neogene supposedly “intra-oceanic” island arcs. Secondly, those arc systems and proximal “back-arcs” have similar seismic characteristics attesting either for the presence of a middle crust with continental velocities and/or serpentinized uppermost mantle that facilitate crustal shortening/slivering and subsequent decoupling from the rest of the subducting plate. It is shown that the proximal back-arc domain (called “rear-arc” in case of paleoarc activity), overlying the mantle wedge and the subducting slab, may lose its strength if slab-derived hydration occur. Decoupling then occurs below the Moho. Arc delamination likely occurs in mid-crustal levels because middle-crust, heated by nearby magmatism, becomes weak. Accretion of arc material onto the upper plate depends on the characteristics of the arc itself and the geodynamic configuration. Most of the accreted material is probably underplated rather than frontally accreted.
ISSN: 0743-9547

hal-01243080
https://hal.archives-ouvertes.fr/hal-01243080
DOI : 10.1016/j.jseaes.2013.07.043

Éditeur(s) : Université Nice Sophia Antipolis
Résumé : The Lesser Antilles is a case study of a very slow subduction (~2 cm/yr) of an old oceanic lithosphere (~84-100 Ma). The region presents a relatively low seismic activity, especially along the interplate contact, and the seismic hazard associated with a possible mega-thrust earthquake is still poorly known. This PhD thesis is a first step toward assessing the ability of the Lesser Antilles subduction zone to produce such a large subduction event. To do so, it aims at constraining the downdip width of the interplate's seismogenic zone. The lack of coverage of permanent seismological stations is a major limitation in the exploration of the Lesser Antilles subduction zone. It is due to the presence of only small aligned islands at far distances from the potentially seismogenic interplate area. Several oceanographic cruises were therefore planned that notably allowed the repeated deployment of ocean bottom seismometers; some of them being left for a few months of background seismicity recording. This thesis specifically focuses on two sets of wide-angle seismic data acquired offshore the Dominica and Martinique islands. From their analysis 3D and 2D tomographic models were produced respectively over the forearc region and across the whole subduction complex. These models constrain the plates' seismic structure as well as their geometry. They allow the discussion of how the imaged structures affect the subduction processes and give a first estimation of the downdip width of the seimogenic zone, defined as the segment of the interplate between the backstop and the upper plate's Moho. The joint interpretation of seismic models and earthquake localizations then refine this first assessment. Epicenter distribution from height months of seismic recording shows indeed that seismicity concentrates within the inner forearc region. The strong velocity gradient that characterize its basement suggests it is denser and more rigid than the more deformable outer forearc basement. The updip limit of the seismogenic zone could then lie arcward of the backstop at the contact of the interplate and the seaward end of the inner forearc crust. At depth, interplate earthquake mechanisms are observed between 35 and 45 km depth and interpreted to have occurred at the downdip limit of the seismogenic zone. The latter could reach a depth over 10,km deeper than the contact of the upper plate's Moho with the interplate, and therefore lie within the mantle wedge. All together, these results imply a large downdip width of the seismogenic zone (~70 km) offshore the Dominica and Martinique islands. Further work is, however, needed in order to fully comprehend the ability of the Lesser Antilles subduction zone to produce a possible mega-thrust earthquake. This would necessitate the evaluation of seismic coupling at the interplate contact and the possible segmentation of the seismogenic zone, for instance, due to the subduction of oceanic ridges.
Les Petites Antilles présentent un contexte géodynamique caractérisé par la subduction à très faible vitesse (~2 cm/an) d'une lithosphère océanique âgée (~84-100 Ma). L'activité sismique y est relativement faible, notamment à l'interplaque, où l'aléa sismique lié à un éventuel séisme de méga-chevauchement reste encore mal contraint. Cette thèse se veut être une première étape dans l'évaluation de la capacité de la zone de subduction des Petites Antilles à générer un tel évènement. Dans ce but, ces travaux tentent d'appréhender l'extension en profondeur du domaine sismogène de l'interplaque. Le manque de couverture des stations sismologiques permanentes est un inconvénient majeur dans l'exploration des Petites Antilles. Il s'explique en raison du peu de terres émergées et de leur éloignement de la zone potentiellement sismogène de l’interplaque. La région a donc fait l'objet de plusieurs campagnes océanographiques qui ont permis, notamment, le déploiement de sismomètres fond de mer (OBS); certains instruments étant restés immergés plusieurs mois afin de procéder à une écoute de la sismicité. Les travaux réalisés au cours de cette thèse se sont focalisés sur deux jeux de données de sismique grand-angle acquis au large des îles de la Dominique et de la Martinique. Leur analyse a permis la construction de modèles tomographiques 3D et 2D respectivement à l'échelle de l'avant-arc et de l'ensemble de la subduction. Ces modèles renseignent sur la structure sismique des plaques en convergence ainsi que sur leur géométrie. Ils permettent de discuter le rôle de la structure dans le fonctionnement de la subduction et d’obtenir une première estimation de l'extension en profondeur de la zone sismogène en considérant la portion de l'interplaque comprise entre le butoir et le Moho de la plaque supérieure. Dans un second temps, l'interprétation conjointe des modèles tomographiques et des localisations des séismes locaux a permis d'affiner cette estimation. Huit mois d'enregistrement de la sismicité montrent en effet une concentration des épicentres dans la région interne de l’avant-arc. Celle-ci présente un socle épais, à fort gradient de vitesse interprété comme plus dense et rigide que le socle de la région externe de l'avant-arc, plus déformable. La limite amont de la zone sismogène pourrait donc se situer en retrait de la position du butoir au contact de l'interplaque et de la limite entre ces deux zones de l'avant-arc. En profondeur, des mécanismes interplaques sont observés entre 35 et 45 km et interprétés comme des marqueurs de la limite aval de la zone sismogène. Cette dernière pourrait donc atteindre une profondeur jusqu'à 10 km supérieure à la limite précédemment évoquée et se trouver, par conséquent, au contact du manteau lithosphérique. L'ensemble de ces résultats suggèrent une extension en profondeur de la zone sismogène (i.e une largeur) de près de 70 km face aux îles de la Dominique et de la Martinique. Ces travaux doivent cependant être poursuivis afin d’évaluer pleinement la capacité de la zone de subduction des Petites Antilles à générer un éventuel séisme de méga-chevauchement. Le taux de couplage à l'interplaque doit être précisé ainsi que sa possible segmentation en lien, par exemple, avec à l'entrée en subduction des rides océaniques.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00172/28335/26628.pdf
http://archimer.ifremer.fr/doc/00172/28335/

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : The seismology is the most effective method to explore the Structure of subduction zones to great depth. The distinguishing feature of the mantle in the subduction regions is the presence of hydrated phases, which transport water into the Earth's interior and release it with dramatic local consequences, triggering earthquakes and melting. The seismological detection of these hydrous phases and geo-dynamic interpretation of flow in the hydrous mantle depend on knowledge of the anisotropic elastic properties and the characteristics of the wave propagation in anisotropic media. In this paper we briefly recall the distinguishing features of anisotropic wave propagation and the observable parameters. We suggest the Vp/Vs ratio is a physically sound parameter than can be observed by seismology in anisotropic regions of the Earth, whereas the Poisson's ratio, which is often quoted, is not directly observable and does not correspond to the characteristics of wave propagation in an anisotropic or isotropic medium. We report for the first time the ratios of Vp/Vs1 and Vp/Vs2, where Vs1 is the fastest and Vs2 slowest S-wave velocities of an anisotropic media. We present the current knowledge of the anisotropic seismic properties of hydrous minerals in the upper mantle, transition zone, and lower mantle that are stable along low temperature geotherms associated with subduction, and identify which minerals are likely to influence seismological observations because they have very high volume fractions, or very high anisotropies, or both of these.;In the upper mantle antigorite and talc are exceptionally anisotropic (Vp 71% Vs 68% and Vp 65%, Vs 68%, respectively) and chlorite is also very anisotropic for S-waves (Vp 35%, Vs 76%). Comparatively less anisotropic are hornblende (Vp 27%, Vs 31%), used as proxy for tremolite in subduction zones, and clinohumite (21.8%, Vs 15.9%). Brucite at 4 GPa (Vp 26.5%, Vs 30.9%) and the dense hydrogen magnesium silicate (DHMS) phase A at 9GPa (Vp 9.3%, Vs 17.6%) are the only hydrous minerals stable in the upper mantle that have had their elastic properties measured at in situ mantle pressures. Except for the phase A, all these minerals are more anisotropic than olivine for at least one parameter (Vp, Vs, Vp/Vs1, or Vp/Vs2). In the transition zone the major phases hydrous wadsleyite and ringwoodite C have moderate to weak anisotropies (Vp 16.3%, Vs 16.5%, and Vp 1.9%, Vs 4.4%, respectively). The DHMS Superhydrous B has a moderate anisotropy (Vp 6.9%, Vs 11.6%). At greater depth the DHMS phase D Lit 24 GPa (Vp 10.8%, Vs 18.0%) is the only hydrous phase that can transport hydrogen from the transition zone into the lower mantle. The phase D is more anisotropic for S than P waves like many of the hydrous phases. From these data it is clear that hydrous phases are in general very anisotropic. However, pressure can play a strong role in reducing anisotropy. It is the case for brucite and talc, in which increasing pressure from ambient to 4 GPa reduces the anisotropy by about 50% for both P and S waves. In contrast, the anisotropy of the DHMS phase A does not change significantly with pressure.;Our picture of the seismic anisotropy of hydrated minerals remains incomplete; the elastic properties of many have not been measured even at ambient conditions (e.g., 10 angstrom phase and phase E) or not measured in their true elastic symmetry (e.g., clinochlore). The majority of hydrous minerals have not been measured at high pressure. and none related to hydrated mantle have been measured at elevated temperature. We have shown in the few cases where hydrous minerals have been measured as a function of pressure, that this variable has an important effect oil the velocity distribution and in most cases reduces the degree of anisotropy, hence we Would expect seismic anisotropy to play a key role in the determination of the shallow structure of subduction zones in the upper mantle.
Subduction zone geodynamics

hal-00420893
https://hal.archives-ouvertes.fr/hal-00420893

Éditeur(s) : HAL CCSD
Résumé : The mantle deformation processes that control the thinning and break-up of continental lithosphere remain poorly understood. Our knowledge is restricted to either lithospheric scale thermo-mechanical models --that use experimentally derived flow laws--, geophysical imaging and/or rare xenoliths from active continental rifts, such as the East African Rift System. The originality of this work relies on the study of the two largest outcrops of diamond facies subcontinental lithospheric mantle in the world: the Beni Bousera and Ronda peridotite massifs in N Morocco and S Spain, respectively. The structures and petrologic and metamorphic zoning preserved in these massifs --implying a polybaric and polythermal evolution-- provides a unique opportunity to investigate the thermo-mechanical evolution of thick subcontinental lithospheric mantle in extensional settings. In this thesis we studied the deformation mechanisms in both peridotites and pyroxenites to constrain the modes of exhumation of subcontinental lithospheric mantle from garnet-, to spinel-, and finally, to plagioclase lherzolite facies conditions. We combined field mapping of tectonometamorphic domains and structural mapping of ductile structures, microstructural analysis, crystal preferred orientations (CPO) measurements and conventional thermobarometric calculations and thermodynamic modeling (Perple_X) to unravel the pressure and temperature conditions of deformation. We showed that exhumation from garnet- to spinel lherzolite facies conditions was accommodated by fast shearing --in thermal disequilibrium--along a lithospheric scale transtensional shear zone. In this context, the petrological zoning and the large temperature gradient (ca. 100ºC/km) preserved in the Beni Bousera massif represent the mechanical juxtaposition of progressively deeper and hotter lithospheric levels at depths of ca. 60 km in the latest Oligocene (ca. 25 Ma). Final exhumation from spinel- to plagioclase facies lherzolite and emplacement into the crust is best recorded in the Ronda massif where it occurred by inversion and lithospheric scale folding of the highly attenuated continental lithosphere in a back-arc region, probably in relation with southward slab rollback and subsequent collision with the palaeo-Maghrebien passive margin in the early Miocene (21-23 Ma).
Les processus de déformation contrôlant l'amincissement de la lithosphère continentale sont encore mal contraints. Nos connaissances sont principalement basées sur la modélisation thermomécanique d'extension à l'échelle de la lithosphère--utilisant des lois rhéologiques derivées expérimentalement, l'imagerie géophysique et l'analyse de xénolithes provenant de rift continentaux actifs à ce jour, tels que le Rift Est-Africain. L'originalité de ce travail reside dans l'étude des deux plus grands massifs de péridotites sous-continentales ayant enregistrées des conditions primaires du facies à diamant: les massifs de Beni Bousera au nord du Maroc et de Ronda au sud de l'Espagne, respectivement. Les structures et la zonation petrologique et métamorphique --impliquant une évolution polybarique et polythermique-- préservéees dans ces massifs offrent une opportunité unique pour étudier l'évolution thermo-mécanique du manteau sous-continental dans un contexte extensif. Dans ce travail, nous avons étudié les mécanismes de déformation des péridotites et des pyroxénites afin de contraindre les modes d'exhumation du manteau lithosphérique sous-continental, depuis des conditions du facies des lherzolites à grenat, jusqu'au facies à spinelle et enfin à plagioclase. Nous avons combiné la cartographie des faciès tectono-métamorphiques et des structures ductiles de déformation, l'analyse des microstructures, la mesure d'orientations préférentielles de réseau (OPR), et la géothermobarométrie conventionelle couplée à la modélisation thermodynamique (PerpleX) afin de contraindre les conditions de pression et température de la déformation. Nous avons montré que l'exhumation précoce du facies à grenat au facies à spinelle était accomodée par une faille transtensive affectant le manteau lithosphérique. Dans ce contexte, la zonation tectono-métamorphique et le gradient thermique important (ca. 100ºC/km) préservés à Beni Bousera résultent de la juxtaposition mécanique de domaines lithosphériques initialement équilibrés à différentes pressions et températures, fossilisée à une profondeur de ca. 60 km durant l'Oligocène supérieur (ca. 25 Ma). L'exhumation finale du facies de lherzolite à spinelle au facies à plagioclase et l'emplacement final dans la croûte, mieux enregistrés dans Ronda, se sont produits par inversion et plissement de la section lithosphérique fortement amincie dans un contexte arrière-arc, probablement lors du retrait vers le sud de la lithosphère subduite et la collision de l'arc avec les paléo-marges maghrébines au Miocène inférieur (21-23 Ma).
https://tel.archives-ouvertes.fr/tel-00767700

tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700/document
https://tel.archives-ouvertes.fr/tel-00767700/file/THESE_Frets.pdf

Éditeur(s) : Université de Bretagne Occidentale
Résumé : The aim of this study is to present a comparison of large oceanic fracture zones structures. The first part concerns the results of the Vemanaute dive cruise on the Vema transform fault. The site I is located on the South Wall of the fracture zone. Two sections have covered the entire height of the northern flan and allowed in situ observations and sampling of all the units that constitute the "normal" oceanic crust and upper mantle in a correct stratigraphic order.
Ce mémoire présente les résultats d'une étude comparative concernant les structures caractéristiques des grandes failles transformantes océaniques. Dans une première partie sont présentés les résultats de la campagne de plongées Vemanaute sur la faille transformante Vema. Le premier site étudié est situé sur le mur sud de la vallée transformante. Deux sections ont été levées couvrant toute la hauteur du flanc ; elles nous ont permis d'observer in situ, pour la première fois, et de prélever tous les éléments constituant la croûte océanique "normale" et le manteau supérieur, dans leur ordre stratigraphique.

Droits : UBO
http://archimer.ifremer.fr/doc/00034/14528/11826.pdf
http://archimer.ifremer.fr/doc/00034/14528/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Upper mantle anisotropy beneath the African IRIS and Geoscope stations is investigated through the measurements of splitting of teleseismic shear waves such as SKS, SKKS and PKS phases. Seismic anisotropy data are interesting on their own as a measure of upper mantle active or frozen deformation beneath a given station, but each station is of potential interest since it can be used to retrieve source-side seismic anisotropy at remote sites if one is able to perform station-side anisotropy correction. We performed systematic investigations of teleseismic shear wave splitting at 15 stations from the IRIS and Geoscope global seismic networks, which are located on both the oceanic and the continental parts of the African plate. Anisotropy is generally well observed at continental stations. The patterns we present generally show much more complexity than the results previously published from smaller data sets. Despite this complexity, the splitting parameters generally appear in several places to contain a signature of the regional geodynamic setting (rift structures, Archaean craton, Pan-African belt), although a deeper source of anisotropy (asthenospheric) may be present. At the oceanic stations, anisotropy measurements are much more difficult to perform because the signal is generally of poor quality. MSEY, in the Seychelles (Indian ocean), is the exception and displays a clear correlation of the azimuth of the fast split shear wave with the trend of the absolute plate motion, as defined by hotspot tracks.
ISSN: 0956-540X

hal-01380389
https://hal.archives-ouvertes.fr/hal-01380389
https://hal.archives-ouvertes.fr/hal-01380389/document
https://hal.archives-ouvertes.fr/hal-01380389/file/Barruol_SKS_afric_GJI2001.pdf
DOI : 10.1046/j.0956-540x.2001.01481.x

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Hydrogen can be stored in the structure of nominally anhydrous minerals as point defects, and these impurities substantially modify many physical properties of Earth's mantle minerals. However, mantle rocks are composed of mineral grains separated by grain boundaries and interphase grains boundaries. Therefore, as a potential hydrogen reservoir, grain boundaries should be given proper attention. Here, I report an experimental investigation into hydrogen diffusion through grain boundaries in polycrystalline aggregates Sintering and diffusion experiments were performed using a gas-medium high-pressure vessel at under pressure of 300 MPa and over a temperature range of 900-1,250 degrees C. The diffusion assembly consisted of a polycrystalline cylinder of aluminous spinel + olivine crystals with a talc cylinder as the main hydrogen source. A Ni capsule was used to buffer the oxygen fugacity at Ni-NiO Experimental durations varied from 5 min to 5 h. The presence of hydrogen in the crystals was measured by Fourier-transform infrared spectroscopy. The calculation of the diffusion coefficients was based on the estimation of the characteristic distance. The absence or presence of hydrogen recorded by the 'hydrogen sensor' olivines embedded in the aggregate allows the estimation of bounds on this characteristic distance. Results presented here suggest that hydrogen effective diffusion coefficients are only one order of magnitude faster (similar to 10(-9) m(2)s(-1) at 1,000 degrees C) than in an olivine single crystal along the [100] axis. Resulting diffusion coefficients for hydrogen in grain boundary are four orders of magnitude faster than in a single crystal, but this diffusivity is not fast enough to affect hydrogen mobility in mantle rocks with grain sizes greater than similar to 1 mm. Thus, very limited chemical homogenization would occur using grain boundaries diffusion in mantle hydrous peridotite for incompatible and volatile element, such as hydrogen.
ISSN: 0010-7999

hal-00564353
https://hal.archives-ouvertes.fr/hal-00564353
DOI : 10.1007/s00410-010-0512-4

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Peridotite xenoliths brought up to the surface by the volcanism of the Kerguelen Islands represent a mantle that has been affected by a high degree of partial melting followed by intense melt percolation above the Kerguelen plume. These xenoliths are therefore particularly suitable to investigate effects of melt-rock interaction on crystallographic fabrics (lattice-preferred orientation (LPO)) of peridotite minerals and on the LPO-induced seismic properties of peridotites above a mantle plume. We have studied a suite of 16 ultramafic samples representative of different degrees of partial melting and magma-rock interaction among which the protogranular harzburgites are the least metasomatised xenoliths and dunites are the ultimate stage of metasomatism. Olivine LPO is characterized by high concentration of [010] axes perpendicular to the foliation and [100] axes close to the lineation or distributed in the foliation plane in harzburgites, whereas the high concentration of [100] axes is parallel to the lineation and [010] axes is perpendicular to the assumed foliation in dunites. Olivine LPO in harzburgites is interpreted as being due to a deformation regime in axial compression or transpression. The fabric strength of olivine decreases progressively from protogranular to poikilitic harzburgites and finally to dunites, for which it remains nevertheless significant (J index 3.8). Seismic properties calculated from LPO of minerals indicate that metasomatism at higher melt/rock ratio lowers the P wave velocities. The most significant difference between harzburgites and dunites corresponds to the distribution of S wave anisotropy. Harzburgites display the maximum of anisotropy within the foliation plane and the minimum of anisotropy perpendicular to the foliation plane, whereas the lowest anisotropy is parallel to the lineation for dunites. These modifications of seismic properties as a result of metasomatic processes may induce seismic heterogeneities in the mantle above the Kerguelen plume. In addition, assuming a lithospheric mantle primarily harzburgitic and structured with a horizontal foliation, the seismic properties calculated for the Kerguelen xenoliths reconcile the rather high anisotropy evidenced by the horizontally propagating surface waves with the apparent isotropy revealed by the absence of splitting of vertically propagating teleseismic SKS waves recorded by the GEOSCOPE Kerguelen station.
ISSN: 1525-2027

hal-00366222
https://hal.archives-ouvertes.fr/hal-00366222
https://hal.archives-ouvertes.fr/hal-00366222/document
https://hal.archives-ouvertes.fr/hal-00366222/file/bascou_Kerguelen_2007GC001879_hal.pdf
DOI : 10.1029/2007GC001879

Éditeur(s) : Geological Society of America
Résumé : A seismic-refraction study of the sedimentary structure of the South West African continental shelf was carried out between lat 17°S and 24°S using expendable sonobuoys. Striking differences exist both in the topography and sedimentary structure between the shelf north and south of the Walvis Ridge. South of the ridge, as far as lat 23°S, the shelf consists of a prograded series, whereas north of the ridge, at least as far as lat 17°S, east-trending canyons cut the shelf sedimentary cover. The steep northem scarp of Walvis Ridge can be traced eastward under the sediment of the continental margin. The southern flank of the ridge is buried under a thicker sedimentary cover and could only be traced eastward to long. 10°E on seismic-reflection records. This flank probably parallels the northern scarp under the continental margin. Two-dimensional structural models, built with the help of seismic-retlection and seismic-refraction results and based on the hypothesis of local isostatic equilibrium, account for the obsewed gravity profiles. A compensating root consists of light material (density 2.95 g/cm3) and reaches a depth of about 25 km. Gravity results also suggest that the Walvis Ridge does not constitute a superimposed load on the lithosphere; rather, the ridge and its underlying compensating mass were created at approximately the same time as the adjacent ocean basins. The creation of the two aseismic ridges of the South Atlantic - the Rio Grande Rise and Walvis Ridge - by a mantle hot spot and plume is accepted; this theory seems to explain most of the peculiar features of the Walvis Ridge. However, it is probable that the surface expression of the mantle hot spot was controlled by the presence of weak zones in the lithosphere such as transform faults. [NOT CONTROLLED OCR]
Geological Society of America Bulletin (Geological Society of America), 1975 , Vol. 86 , P. 1713-1724

Droits : Geological Society of America
http://archimer.ifremer.fr/doc/1975/publication-4978.pdf
http://archimer.ifremer.fr/doc/00000/4978/

Éditeur(s) : HAL CCSD
Résumé : International audience
Sub-continental lithospheric mantle rocks are exhumed at the foot of magma-poor distal passive margins as aresponse to extreme stretching of the continental crust during plate separation. Remnants of the Northern Iberianpaleo-passive margin are now exposed in the North-Pyrenean Zone (NPZ) and represent field analogues to studythe processes of continental crust thinning and subcontinental mantle exhumation. The NPZ results from theinversion of basins opened between the Iberia and Europa plates during Albo-Cenomanian times. In the westernNPZ, the ‘Chaînons Béarnais’ ranges display a fold-and-thrust structure involving the Mesozoic sedimentarycover, decoupled from its continental basement and associated with peridotite bodies in tectonic contact withPalaeozoic basement lenses of small size. Continental extension developed under hot thermal conditions, asdemonstrated by the syn-metamorphic Cretaceous ductile deformation affecting both the crustal basement and theallochthonous Mesozoic cover.In this study, we present structural and geochemical data providing constraints to reconstruct the evolution ofthe northern Iberia paleo-margin. Field work confirms that the pre-rift Mesozoic cover is intimately associatedto mantle rocks and to thin tectonic lenses of crustal basement. It also shows that the pre-rift cover was detachedfrom its bedrock at the Keuper evaporites level and was welded to mantle rocks during their exhumation atthe foot of the hyper-extended margin. The crust/mantle detachment fault is a major shear zone characterizedby anastomosed shear bands defining a plurimetric phacoidal fabric at the top of the serpentinized mantle. Thedetachment is marked by a layer of metasomatic rocks, locally 20 meters thick, made of talc-chlorite-pyrite-richrocks that developped under greenschist facies conditions. Raman Spectroscopy on Carbonaceous Materials(RSCM), performed on the Mesozoic cover reveal that the entire sedimentary pile underwent temperatures rangingbetween 200C and 480C.We show that: (i) at the site of mantle rocks exhumation, the boudinaged pre-rift sediments have undergone drasticsyn-metamorphic thinning with the genesis of a S0/S1 foliation and, (ii) the Paleozoic basement has been ductilelydeformed, into thin tectonic lenses that remained welded to the exhumed mantle rocks. Therefore the overallcrustal rheology appears dominated by shallow levels having a ductile behavior. This rheology is related to thepresence of a thick pre- and syn-rift decoupled cover acting as an efficient thermal blanket. This new geologicaldata set highlights important characteristics of ductile-type hyper-extended passive margin that cannot be obtainedfrom the study of seismic lines. Finally, we stress that studying field analogues represents a major tool to betterunderstand the mechanisms of extreme crustal thinning associated with mantle exhumation and their structuralinheritance during tectonic inversion.
Geophysical Research Abstracts
Vienne, Austria

insu-01510103
https://hal-insu.archives-ouvertes.fr/insu-01510103

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigated the response of the crystal structure, lattice parameters, and unit-cell volume of hydrous layered silicate phlogopite at conditions relevant to subduction zone settings. We have used first principles simulation based on density functional theory to calculate the equation of state and full elastic constant tensor. Based on the generalized gradient approximation, the full single crystal elastic constant tensor with monoclinic symmetry shows significant anisotropy with the compressional elastic constants: c11 = 181 GPa, c22 = 185 GPa, c33 = 62 GPa, the shear elastic constants c44 = 14 GPa, c55 = 20 GPa, c66 = 68 Ga, and c46 = −6 GPa; the off diagonal elastic constants c12 = 48 GPa, c13 = 12 GPa, c23 = 12 GPa, c15 = −16 GPa, c25 = −5 GPa and c35 = −1 GPa at zero pressure. The elastic anisotropy of phlogopite is larger than most of the layered hydrous phases relevant in the subduction zone conditions. The shear anisotropy, AVS for phlogopite is ∼77% at zero pressure condition and although it decreases upon compression it remains relatively high compared to other hydrous phases relevant in the subduction zone settings. We also note that the shear elastic constants for phlogopite are relatively low. Phlogopite also has a high isotropic bulk VP/VS ratio ∼2.0. However, the VP/VS ratio also exhibits significant anisotropy with values as low as 1.49. Thus, phlogopite bearing metasomatized mantle could readily explain unusual VP/VS ratio as observed from seismological studies from the mantle wedge regions of the subduction zone.
ISSN: 0031-9201

hal-01115670
https://hal.archives-ouvertes.fr/hal-01115670
DOI : 10.1016/j.pepi.2014.05.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A variety of atypical plume-like structures and focused upwellings that are not rooted in the lower mantle have recently been discussed, and seismological imaging has shown ubiquitous small-scale convection in the uppermost mantle in regions such as the Mediterranean region, the western US, and around the western Pacific. We argue that the three-dimensional return flow and slab fragmentation associated with complex oceanic subduction trajectories within the upper mantle can generate focused upwellings and that these may play a significant role in regional tectonics. The testable surface expressions of this process are the outside-arc alkaline volcanism, topographic swell, and low-velocity seismic anomalies associated with partial melt. Using three-dimensional, simplified numerical subduction models, we show that focused upwellings can be generated both ahead of the slab in the back-arc region (though -five times further inward from the trench than arc-volcanism) and around the lateral edges of the slab (in the order of 100 km away from slab edges). Vertical mass transport, and by inference the associated decompression melting, in these regions appears strongly correlated with the interplay between relative trench motion and subduction velocities. The upward flux of material from the depths is expected to be most pronounced during the first phase of slab descent into the upper mantle or during slab fragmentation. We discuss representative case histories from the Pacific and the Mediterranean where we find possible evidence for such slab-related volcanism.
ISSN: 0012-821X

hal-00553075
https://hal.archives-ouvertes.fr/hal-00553075
DOI : 10.1016/j.epsl.2010.08.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The lithospheric mantle is intrinsically heterogeneous and anisotropic. These two properties govern the repartition of deformation, controlling intraplate strain localization and development of new plate boundaries. Geophysical and geological observations provide clues on the types, ranges, and characteristic length scales of heterogeneity and anisotropy in the lithospheric mantle. Seismic tomography points to variations in geothermal gradient and hence in rheological behavior at scales of hundreds of km. Seismic anisotropy data substantiate anisotropic physical properties consistent at scales of tens to hundreds of km. Receiver functions imply lateral and vertical heterogeneity at scales < 10 km, which might record gradients in composition or anisotropy. Observations on naturally deformed peridotites establish that compositional heterogeneity and Crystal Preferred Orientations (CPOs) are ubiquitous from the mm to the km scales. These data allow discussing the processes that produce/destroy heterogeneity and anisotropy and constraining the time scales over which they are active. This analysis highlights: (i) the role of deformation and reactive percolation of melts and fluids in producing compositional and structural heterogeneity and the feedbacks between these processes, (ii) the weak mechanical effect of mineralogical variations, and (iii) the low volumes of fine-grained microstructures and difficulty to preserve them. In contrast, olivine CPO and the resulting anisotropy of mechanical and thermal properties are only modified by deformation. Based on this analysis, we propose that strain localization at the plate scale is, at first order, controlled by large-scale variations in thermal structure and in CPO-induced anisotropy. In cold parts of the lithospheric mantle , grain size reduction may contribute to strain localization, but the low volume of fine-grained domains limits this effect.
ISSN: 0040-1951

hal-01277174
https://hal.archives-ouvertes.fr/hal-01277174
DOI : 10.1016/j.tecto.2015.07.026

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We report new structural, microstructural, petrological, and major- and trace-element data on ultramafic rocks from the Kondyor zoned ultramafic complex in Far-East Russia. The ultramafic rocks are subdivided into three subconcentric lithologies, from core to rim: (1) a metasomatic domain where generally phlogopite-rich dykes pervasively intrude dunite; (2) a main dunite core; (3) a pyroxenite rim. The ultramafic rocks have nearly vertical contacts with the surrounding Archaean basement (gneisses, quartzites and marbles) and hornfelsed Riphean sediments. The hornfelsed sediments show a relatively steep ( 60), outward dipping layering, which rapidly flattens to horizontal away from the inner contact. Although the Riphean sediments define a dome-like structure, the inward, shallow dipping foliation of the dunites indicates a synformal structure. Detailed petro-structural investigations indicate that the Kondyor dunites were deformed by solid-state flow under asthenospheric mantle conditions. The outward textural change from coarse- to fine-grained equigranular dunite and the outward-increasing abundance of subgrains and recrystallized olivine grains suggest dynamic recrystallization while fluid circulation was channelized within the core metasomatic zone, with a decreasing melt fraction from core to rim, and also suggest that solid-state deformation induced grain-size reduction towards the cooling border of the Kondyor massif. Based on their geochemistry, the dunites are interpreted as mantle rocks strongly affected by reaction with melts similar to the JurassicCretaceous Aldan Shield lamproites. Rim pyroxenites were formed by a melt-consuming peritectic reaction, implying the existence of at least a small, conductive thermal gradient around the dunite body while the latter was still at near-solidus temperature conditions. This suggests that the zoned structure of Kondyor was initiated at mantle depths, most probably within the subcontinental lithosphere. Upon cooling, the lamproitic melts were progressively focused in the central part of the massif and drained into vein conduits where they reacted with the wall-rock dunite. Two-dimensional numerical modelling based on finite-differences with a marker-in-cell technique incorporates temperature-dependent rheologies for both molten and non-molten host rocks. The modelling consolidates the structural, petrological and geochemical interpretations, which show that the dunites represent the synformal, flat-lying apex of an asthenospheric mantle diapir, triggered by fluid pressure channelized in the core, which nearly reached the Earths surface. We conclude that translithospheric mantle diapirism is an important mode of mass transfer in the Earth.
ISSN: 0022-3530

hal-00424508
https://hal.archives-ouvertes.fr/hal-00424508
DOI : 10.1093/petrology/egn083

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Sapat peridotite in Kohistan (NW Pakistan) is a 12x1 km sized body of meta-harzburgites, dunites, pyroxenites and meta-gabbros in the hanging wall of the Indus Suture Zone. Field relations, micro-textures, bulk and mineral chemistry document melt-rock reactions producing dunites at the expense of meta-harzburgites, and a consecutive olivine-clinopyroxenite formation from the same melt type. The association of mesa-gabbros, dunites, and pyroxenites is interpreted as a crust-mantle transition zone produced by the percolation of highly depleted primitive arc melt. The meta-harzburgites represent large portions of refractoty mantle that have suffered melt extraction and metasomatism prior to their interaction with the dunite-forming primitive arc melt and the establishment of the crust-mantle transition zone. Uncommon vein assemblages in the dunites that include Cr-clinochlore, calcite and olivine document a late percolation of slab-related, volatile-rich fluids. Taking into account the highly refractory composition of the Sapat mantle, its structural position, the evidence for interaction with highly depleted arc melts and the sub-solidus interaction with volatile-rich arc fluids, the Sapat ultramafic rocks are interpreted as being derived from the frontal Kohistan arc, representing a crust-mantle transition formed by arc magmatism.
ISSN: 0024-4937

hal-00424515
https://hal.archives-ouvertes.fr/hal-00424515
DOI : 10.1016/j.lithos.2008.07.004

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : We study the Africa-Iberia plate boundary in the vicinity of Gibraltar. Numerous models have been proposed for that region throughout the last decades, proposing mechanisms that range widely from continental delamination, convective removal, to subduction of oceanic lithosphere. To better constrain upper-mantle structure under the region, we study waveforms of P-waves that traverse the Alboran Sea region between Spain and Morocco. These show dispersive behavior, which, together with early arrival times, confirms the presence of an anomalous upper mantle structure under the Alboran Sea. The dispersion is consistent with that expected from subducted lithosphere. Waveforms of body waves therefore provide a way to better constrain the elusive mantle structure and dynamics of the Alboran Sea region
ISSN: 0094-8276

hal-00407670
https://hal.archives-ouvertes.fr/hal-00407670
DOI : 10.1029/2007GL030964