Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
Peridotite xenoliths exhumed by Quaternary alkaline magmatism in the Tahalgha district, southern Hoggar, represent fragments of the subcontinental lithospheric mantle beneath the boundary between the two major structural domains of the Tuareg Shield: the ‘Polycyclic Central Hoggar’ to the east and the ‘Western Hoggar’, or ‘Pharusian Belt’, to the west. Samples were collected from volcanic centres located on both sides of a major lithospheric shear zone at 4°35' separating these two domains. Although showing substantial variations in their deformation microstructures, equilibrium temperatures and modal and chemical compositions, the studied samples do not display any systematic changes of these features across the 4°35' fault. The observed variations rather record small-scale heterogeneities distributed throughout the study area and reflecting the widespread occurrence of vein conduits and metasomatized wall-rocks related to trans-lithospheric melt circulation during the Cenozoic. These features include partial annealing of pre-existing deformation microstructures, post-deformation metasomatic reactions, and trace-element enrichment, coupled with heating from 750–900°C (low-temperature lherzolites) to 900–1150°C (intermediate-T lherzolites and high-T harzburgites and wehrlites). Trace-element modelling confirms that the range of rare earth element (REE) variations observed in the Tahalgha clinopyroxenes may be accounted for by reactive porous flow involving a single stage of basaltic melt infiltration into a light REE (LREE)-depleted protolith. Whole-rock compositions record the final entrapment of disequilibrium metasomatic melts upon thermal relaxation of the veins–wall-rock system. The striking correlations between equilibrium temperatures and trace-element enrichment favor a scenario in which the high-temperature peridotites record advective heat transport along melt conduits, whereas the intermediate- and low-temperature lherzolites reflect conductive heating of the host Mechanical Boundary Layer. This indicates that the lithosphere did not reach thermal equilibrium, suggesting that the inferred heating event was transient and was rapidly erased by thermal relaxation down to the relatively low-temperature present-day geotherm. The low-T (<900°C) deformed lherzolites (porphyroclastic to equigranular) are characterized by only incipient annealing and LREE-depleted clinopyroxene compositions. They were only weakly affected by the Cenozoic events and could represent relatively well-preserved samples from rejuvenated Pan-African lithosphere. Extensive lithospheric rejuvenation occurred either regionally during the Pan-African orogeny, as a result of lithospheric delamination or thermomechanical erosion after thickening, or more locally along the meridional shear zones. The low-T Tahalgha lherzolites are comparable with lherzolites from Etang de Lherz, southern France, interpreted as lithospheric mantle rejuvenated by melt-induced refertilization during a late stage of the Variscan orogeny.
ISSN: 0022-3530

hal-01107410
https://hal.archives-ouvertes.fr/hal-01107410
DOI : 10.1093/petrology/egu056

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Laboratory models have been conducted to improve our understanding of the role that the resistance of the slab to bending and its coupling to the ambient mantle play in subduction dynamics over geological time scales. Our models are set up with a viscous plate of silicone (lithosphere) subducting under negative buoyancy in a viscous layer of glucose syrup (mantle). For our study, the lithosphere/upper mantle viscosity contrast has been systematically varied, from similar to 10 to similar to 10(5) in order to explore the parameter space between weak and strong slab dynamics. We found that subduction is characterized by a retreating mode for viscosity ratios > 10(4), by the coexistence of a retreating mode and an advancing mode for viscosity ratios between similar to 10(4) and similar to 10(2), and quasi-stationary, Rayleigh-Taylor like behaviour for ratios < 10(2). By combining our experimental results and kinematic data from current subduction zones in four reference frames which differ in the amount of net rotation, we infer that a lithosphere/upper mantle viscosity contrast of 150-500 is necessary to obtain realistic trench/subducting plate velocity ratios as well as the variability of subduction styles observed in nature.
ISSN: 0012-821X

hal-00412008
https://hal.archives-ouvertes.fr/hal-00412008
DOI : 10.1016/j.epsl.2008.04.006

Éditeur(s) : HAL CCSD Annual Reviews
Résumé : International audience
The record of the continental lithosphere is patchy and incomplete; no known rock is older than 4.02 Ga, and less than 5% of the rocks preserved are older than 3 Ga. In addition, there is no recognizable mantle lithosphere from before 3 Ga. We infer that there was lithosphere before 3 Ga and that ∼3 Ga marks the stabilization of blocks of continental lithosphere that have since survived. This was linked to plate tectonics emerging as the dominant tectonic regime in response to thermal cooling, the development of a more rigid lithosphere, and the recycling of water, which may in turn have facilitated plate tectonics. A number of models, using different approaches, suggest that at 3 Ga the volume of continental crust was ∼70% of its present-day volume and that this may be a minimum value. The continental crust before 3 Ga was on average more mafic than that generated subsequently, and this pre-3 Ga mafic new crust had fractionated Lu/Hf and Sm/Nd ratios as inferred for the sources of tonalite-trondhjemite-granodiorite and later granites. The more intermediate composition of new crust generated since 3 Ga is indicated by its higher Rb/Sr ratios. This change in composition was associated with an increase in crustal thickness, which resulted in more emergent crust available for weathering and erosion. This in turn led to an increase in the Sr isotope ratios of seawater and in the drawdown of CO2. Since 3 Ga, the preserved record of the continental crust is marked by global cycles of peaks and troughs of U-Pb crystallization ages, with the peaks of ages appearing to match periods of supercontinent assembly. There is increasing evidence that the peaks of ages represent enhanced preservation of magmatic rocks in periods leading up to and including continental collision in the assembly of supercontinents. These are times of increased crustal growth because more of the crust that is generated is retained within the crust. The rates of generation of continental crust and mantle lithosphere may have remained relatively constant at least since 3 Ga, yet the rates of destruction of continental crust have changed with time. Only relatively small volumes of rock are preserved from before 3 Ga, and so it remains difficult to establish which of these are representative of global processes and the extent to which the rock record before 3 Ga is distorted by particular biases.
ISSN: 0084-6597

hal-01622692
https://hal.archives-ouvertes.fr/hal-01622692
DOI : 10.1146/annurev-earth-063016-020525

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Middle Atlas is a region where xenolith-bearing volcanism roughly coincides with the maximum of lithospheric thinning beneath continental Morocco. It is therefore a key area to study the mechanisms of lithospheric thinning and constrain the component of mantle buoyancy that is required to explain the Moroccan topography. Samples from the two main xenolith localities, the Bou Ibalghatene and Tafraoute maars, have been investigated for their mineralogy, microstructures, crystallographic preferred orientation, and whole-rock and mineral compositions. While Bou Ibalghatene belongs to the main Middle Atlas volcanic field, in the ‘tabular’ Middle Atlas, Tafraoute is situated about 45 km away, on the North Middle Atlas Fault that separates the ‘folded’ Middle Atlas, to the South-East, from the ‘tabular’ Middle Atlas, to the North-West. Both xenolith suites record infiltration of sub-lithospheric melts that are akin to the Middle Atlas volcanism but were differentiated to variable degrees as a result of interactions with lithospheric mantle. However, while the Bou Ibalghatene mantle was densely traversed by high melt fractions, mostly focused in melt conduits, the Tafraoute suite records heterogeneous infiltration of smaller melt fractions that migrated diffusively, by intergranular porous flow. As a consequence the lithospheric mantle beneath Bou Ibalghaten was strongly modified by melt–rock interactions in the Cenozoic whereas the Tafraoute mantle preserves the record of extensional lithospheric thinning, most likely related to Mesozoic rifting. The two xenolith suites illustrate distinct mechanisms of lithospheric thinning: extensional thinning in Tafraoute, where hydrous incongruent melting triggered by decompression probably played a key role in favouring strain localisation, vs. thermal erosion in Bou Ibalghatene, favoured and guided by a dense network of melt conduits. Our results lend support to the suggestion that lithospheric thinning beneath the Atlas mountains results from the combination of different mechanisms and occurred in a piecewise fashion at a short wavelength scale.
ISSN: 0040-1951

hal-01171756
https://hal.archives-ouvertes.fr/hal-01171756
DOI : 10.1016/j.tecto.2014.11.020

Éditeur(s) : Gauthier-Villars
Résumé : Simple thermodynamics calculations are applied to processes of a rising plume within an environment of an upward directed gradient of viscosity in the uppermost mantle. Four stages of the development of passive margins are described. Following an initial regional uplift strong lateral movements are induced at asthenospheric levels, stretching the overlying lithosphere. In the second stage plume material also enters the low viscosity lower crust, replacing continental material and forming a new, higher crust-mantle boundary by gravitational differentiation. The inital phase lag between the laterally intruding plume material and the rest of the lithosphere disappears once the continent is rifted and sea floor spreading is established (= stage 3). Finally, at stage 4, quiet subsidence, controlled by contraction, sedimentation, and possible phase changes in the lower crust, is established. The sequence described is in accordance with many observations of geology and geophysics. Rising plumes and sinking slabs are considered equivalent expressions of the heat engine earth which determines global tectonics.
Oceanologica Acta, Special issue (0399-1784) (Gauthier-Villars), 1981

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00245/35658/34167.pdf
http://archimer.ifremer.fr/doc/00245/35658/

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The lateral variation of the mechanical properties of continental lithosphere is an important factor controlling the localization of deformation and thus the deformation history and geometry of intraplate mountain belts. A series of three-layer lithospheric-scale analog models, with a strong domain (SD) embedded at various depths, are presented to investigate the development of topography and deformation patterns by having lateral heterogeneities within a weak continental lithosphere. The experiments, performed at a constant velocity and under normal gravity, indicate that the presence or absence of the SD controls whether deformation is localized or distributed at a lithospheric scale. Deformation and topography localize above the edges of the SD, while the SD region itself is characterized by minor amounts of surficial deformation and topography. The depth of the SD (within the ductile crust, ductile mantle lithosphere, or both) controls the pattern of deformation and thus the topography. The presence of a SD in the ductile crust or in the mantle results in limited surficial topographic effects but large variations in the Moho topography. Strong Moho deflection occurs when the SD is in the ductile crust, while the Moho remains almost flat when the SD is in the mantle. When the SD occupies the ductile lithosphere, the SD is tilted. These analog experiments provide insights into intraplate strain localization and could in particular explain the topography around the Tarim Basin, a lithospheric-scale heterogeneity north of the India-Asia collision zone.
ISSN: 0278-7407

hal-01172472
https://hal.archives-ouvertes.fr/hal-01172472
DOI : 10.1002/2014TC003756

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Cratons represent the oldest preserved lithospheric domains. Their lithosphere (lithospheric mantle welded to overlying Precambrian crystalline basement) is considered to be particularly robust and long-lived due to the protecting presence of buoyant and rigid “keels” made up of residual harzburgites. Although the cratons are mostly assumed to form in the Archaean, the timing of their formation remains poorly constrained. In particular, there are very few datasets describing concurrently the age of both the crustal and mantle portions of the lithosphere. In this study, we report new U–Pb ages and Hf isotope compositions for zircons in crustal xenoliths from the Udachnaya kimberlite in the central Siberian craton; this dataset includes samples from both the upper and lower portions of the crust. The zircon ages agree well with model melt-extraction Re–Os ages on refractory peridotite xenoliths from the same pipe; taken together they allow an integrated view of lithosphere formation. Our data reveal that the present day upper crust is Archaean, whereas both the lower crust and the lithospheric mantle yield Paleoproterozoic ages. We infer that the deep lithosphere beneath the Siberian craton was not formed in a single Archaean event, but grew in at least two distinct events, one in the late Archaean and the other in the Paleoproterozoic. Importantly, a complete or large-scale delamination and rejuvenation of the Archaean lower lithosphere (lower crust and lithospheric mantle) took place in the Paleoproterozoic. This further demonstrates that craton formation can be a protracted, multi-stage process, and that the present day crust and mantle may not represent complementary reservoirs formed through the same tectono-magmatic event. Further, deep cratonic lithosphere may be less robust and long living than often assumed, with rejuvenation and replacement events throughout its history.
ISSN: 0012-821X

hal-01467648
https://hal.archives-ouvertes.fr/hal-01467648
DOI : 10.1016/j.epsl.2016.09.046

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Transmission electron microscopy observations on olivine crystals deformed at moderate (≤1273 K) temperature evidenced dislocations interactions explaining the hardening observed in the experiments, but also recovery mechanisms by the absorption or emission of point defects. Thus we investigate the possibility that, at geological strain-rates, these recovery processes allow steady-state deformation by dislocation creep at low to moderate temperatures in the lithospheric mantle. We test this hypothesis using a 2.5-D dislocation dynamics (DD) model, which combines dislocation glide and recovery by climb. This model shows that diffusion-controlled recovery processes allow for steady-state deformation by dislocation creep in the lithospheric mantle at stresses <500 MPa. For stresses of 50–200 MPa, steady-state strain-rates of 10−15 s−110−15 s−1 may be attained at temperatures as low as 900 K. Fitting of the DD model produces a flow law, which represents a lower bound for the lithospheric mantle strength, since the models describe the deformation of an olivine single crystal in an easy slip orientation. Comparison of strain-rates and Moho temperatures inferred for different geodynamic environments and the predictions of this model-based flow law implies, nevertheless, that, except in incipient rifts, most of the observed deformation may be produced by stress levels ≤200 MPa, consistent with those inferred to be produced by convection. This convergence suggests that the present models, which explicitly calculate the time-dependent dislocation dynamics, may provide a correct first order estimate of the mechanical behaviour of the lithospheric mantle, which cannot be derived directly from any existing data.
ISSN: 0012-821X

hal-01277178
https://hal.archives-ouvertes.fr/hal-01277178
https://hal.archives-ouvertes.fr/hal-01277178/document
https://hal.archives-ouvertes.fr/hal-01277178/file/Boioli.pdf
DOI : 10.1016/j.epsl.2015.10.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic tomography and high surface heat flow models indicate an anomalously thin and hot lithospheric mantle beneath the Canadian Cordillera. To understand the thermal and deformational history of the lithospheric mantle under these conditions, we performed a study of the microstructures, crystal preferred orientations (CPO), and seismic anisotropy of mantle xenoliths collected in the Summit Lake volcano in the southern Canadian Cordillera. The xenoliths vary in composition between spinel lherzolites, cpx-rich lherzolites, and wehrlites. All samples are coarse-grained and show clear evidence for annealing, but deformation microstructures are well-preserved in the spinel lherzolites. Olivine CPO is characterized by a strong point-maximum of [100] and by a girdle distribution of [010[ and [001] axes normal to it; CPO strength is variable, spinel-lherzolites have the strongest CPO. Some samples show a weak orthopyroxene CPO consistent with the olivine one. However most pyroxenes have random CPO, interstitial shapes and undeformed appearance, which suggest a secondary origin by reactive melt percolation under static conditions, leading to crystallization of cpx + sp +/- opx at the expenses of olivine, followed by crystallization of cpx + sp +/- ol at the expenses of opx to produce the wehrlites. The studied xenoliths have typical upper mantle seismic properties patterns with fastest propagation of P-waves and polarization of S-waves parallel to the olivine [100] maxima. Maximum P- and S-waves anisotropy for lherzolites are 8 and 5% respectively. Dispersion of the olivine CPO due to neocrystallization of olivine results in weaker anisotropies (6.5 and 3.5%) in wehrlites. Seismic velocities calculated using a geotherm consistent with the equilibrium temperatures of the Summit Lake xenoliths are 3-4% lower than those expected in a normal, 100 km-thick lithosphere, consistent with seismic tomography models for the region. This high geothermal gradient may be partially explained by considering the anisotropy of thermal conductivity of olivine and subhorizontal foliations in the lithospheric mantle, which result in a decrease by up to 15% of the thermal conductivity in the vertical direction.
ISSN: 0040-1951

hal-00618332
https://hal.archives-ouvertes.fr/hal-00618332
DOI : 10.1016/j.tecto.2011.04.014

Éditeur(s) : HAL CCSD
Résumé : Volatile-rich, silica-undersaturated alkaline lavas record the important role of fluids during fluid-rock and magma-rock interactions in the mantle, which are key processes to understand the dynamics of the convective mantle and lithosphere-asthenosphere interactions in intracontinental settings. The aim of this thesis is to bring new constraints on the genesis of alkaline magmas by characterizing the crystallization conditions, the source and the partial melting processes taking part in the genesis of olivine nephelinites, pyroxene nephelinites and basanites from the Jbel Saghro volcanic field in the Moroccan Anti Atlas.The petrological and geochemical study of rocks and minerals coupled with the analysis of fluid inclusions constrains the pre-eruptive conditions of Saghro nephelinites to 1.7–2.2 GPa and ~1350 °C. Minerals show that nephelinitic magmas are rich in volatile elements (Cl, F, S), and fluid inclusions indicate that magmas were saturated with a CO2-rich fluid at pressures > 590 MPa. The various mineralogical assemblages and the presence of peridotite xenoliths suggest a rapid ascent for olivine nephelinites and more complex processes at depth for pyroxene nephelinites.Fractional crystallization and partial melting modelling of Saghro mafic lavas indicate that they are low-degree melts (0.6–2.5 %) of an amphibole-bearing carbonated peridotite enriched in incompatible elements, at the garnet-spinel transition (~80–85 km). Saghro nephelinites display a temporal evolution with a slight increase of the degree of melting and a decrease of the amount of residual amphibole from the oldest (olivine nephelinites, 9.6 Ma) to the most recent (pyroxene nephelinites, 2.9 Ma). Basanites form a system that is independent from nephelinites and are slightly higher-degree melts. Important variations in their chemical composition suggest variable amounts of fractional crystallization during ascent.The peculiar characteristics of Saghro nephelinites and basanites (enrichment in incompatible elements, negative anomalies in K, Zr, Hf and Ti, high Ca/Al and Zr/Hf ratios) indicate that their source was affected by carbonatitic metasomatism. The influence of this metasomatism is stronger for pyroxene nephelinites than for olivine nephelinites. These results suggest fluid-rock interactions beneath the Northwest African Craton, leading to the formation of a metasomatized mantle by CO2-rich carbonatitic components at the lithosphere-asthenosphere transition. The origin of the metasomatism inducing source enrichment and the formation of amphibole veins could be attributed to the melting of relict subducted oceanic lithosphere. The relatively low melting temperatures (< 1350 °C) suggest the absence of a thermal anomaly beneath the Jbel Saghro, and thus support a lithosphere delamination model as precursor of Saghro volca0,3nism. However, the increasing degree of partial melting over time, also observed in the Middle Atlas, together with the isotopic and geochemical similarities with Canary Islands alkaline lavas does not allow us to discard the influence of a deviation of the Canary mantle plume beneath northwest Africa.
Les laves alcalines sous-saturées riches en éléments volatils sont les marqueurs du rôle important des fluides dans le manteau et des interactions fluide-roche et magma-roche, processus clés pour comprendre la dynamique du manteau convectif et les interactions asthénosphère-lithosphère en domaine intracontinental. L’objectif de cette thèse est d’apporter de nouvelles contraintes sur la genèse des magmas alcalins en caractérisant les conditions de cristallisation, la source et les processus de fusion partielle à l’origine des néphélinites à olivine, des néphélinites à pyroxène et des basanites du champ volcanique du Jbel Saghro dans l’Anti-Atlas marocain.L’étude pétrologique et géochimique des roches et des minéraux, couplée à l’analyse des inclusions fluides a permis de contraindre les conditions pré-éruptives des néphélinites de Saghro à 1.7–2.2 GPa et ~1350 °C. Les minéraux montrent que les magmas néphélinitiques sont riches en éléments volatils (Cl, F, S), et les inclusions fluides indiquent que les magmas étaient saturés en fluide riche en CO2 à des pressions > 590 MPa. Les différents assemblages minéralogiques des néphélinites et la présence de xénolites péridotitiques suggèrent une ascension rapide des néphélinites à olivine et des processus plus complexes en profondeur pour les néphélinites à pyroxène.La modélisation des processus de cristallisation fractionnée et de fusion partielle des laves mafiques de Saghro a permis de déterminer qu’elles sont issues de faibles taux de fusion partielle (0.6–2.5 %) d’une péridotite carbonatée enrichie en éléments incompatibles, au niveau de la transition grenat–spinelle (~80–85 km) et en présence d’amphibole. Les néphélinites de Saghro montrent une évolution temporelle avec une légère augmentation du taux de fusion et une diminution de la quantité d’amphibole au résidu des plus anciennes (néphélinites à olivine, 9.6 Ma) aux plus récentes (néphélinites à pyroxène, 2.9 Ma). Les basanites forment un système indépendant des néphélinites et sont issues de taux de fusion plus élevés. Les fortes variations dans leur composition chimique suggèrent qu’elles ont subi de la cristallisation fractionnée lors de leur ascension.Les caractéristiques particulières des néphélinites et basanites de Saghro (enrichissement en éléments incompatibles, anomalies négatives en K, Zr, Hf et Ti, rapports Ca/Al et Zr/Hf élevés) indiquent que leur source a subi un métasomatisme principalement carbonatitique. L’influence de ce métasomatisme est plus forte pour les néphélinites à pyroxène que pour les néphélinites à olivine, impliquant une évolution temporelle de l’intensité du métasomatisme. Ces résultats suggèrent des interactions fluide-roche sous le craton Nord-Ouest Africain, entraînant la formation d'un manteau métasomatisé par des composants carbonatitiques riches en CO2 au niveau de la transition lithosphère-asthénosphère. L’origine du métasomatisme provoquant l’enrichissement de la source et la formation de veines d’amphibole pourrait être liée à la fusion de reliquats de croûte océanique subductée. Les températures de fusion relativement faibles (< 1350 °C) suggèrent l’absence d’anomalie thermique sous le Jbel Saghro, et favorisent donc un modèle de délamination de la lithosphère comme initiateur du volcanisme. Cependant, l’augmentation du taux de fusion partielle au cours du temps, également observée dans le Moyen Atlas, et les similitudes isotopiques et géochimiques avec les laves alcalines des îles Canaries ne permettent pas d’exclure une influence du panache des Canaries sur la source du volcanisme alcalin du Jbel Saghro.
https://tel.archives-ouvertes.fr/tel-01615888

NNT : 2015MONTS070
tel-01615888
https://tel.archives-ouvertes.fr/tel-01615888
https://tel.archives-ouvertes.fr/tel-01615888/document
https://tel.archives-ouvertes.fr/tel-01615888/file/53752_CHAMBOREDON_2015_archivage_cor.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Rifting in a cratonic lithosphere is strongly controlled by several interacting processes including crust/mantle rheology, magmatism, inherited structure and stress regime. In order to better understand how these physical parameters interact, a 2 yr long seismological experiment has been carried out in the North Tanzanian Divergence (NTD), at the southern tip of the eastern magmatic branch of the East African rift, where the southward-propagating continental rift is at its earliest stage. We analyse teleseismic data from 38 broad-band stations ca. 25 km spaced and present here results from their receiver function (RF) analysis. The crustal thickness and Vp/Vs ratio are retrieved over a ca. 200 × 200 km2 area encompassing the South Kenya magmatic rift, the NTD and the Ngorongoro-Kilimanjaro transverse volcanic chain. Cratonic nature of the lithosphere is clearly evinced through thick (up to ca. 40 km) homogeneous crust beneath the rift shoulders. Where rifting is present, Moho rises up to 27 km depth and the crust is strongly layered with clear velocity contrasts in the RF signal. The Vp/Vs ratio reaches its highest values (ca. 1.9) beneath volcanic edifices location and thinner crust, advocating for melting within the crust. We also clearly identify two major low-velocity zones (LVZs) within the NTD, one in the lower crust and the second in the upper part of the mantle. The first one starts at 15–18 km depth and correlates well with recent tomographic models. This LVZ does not always coexist with high Vp/Vs ratio, pleading for a supplementary source of velocity decrease, such as temperature or composition. At a greater depth of ca. 60 km, a mid-lithospheric discontinuity roughly mimics the step-like and symmetrically outward-dipping geometry of the Moho but with a more slanting direction (NE–SW) compared to the NS rift. By comparison with synthetic RF, we estimate the associated velocity reduction to be 8–9 per cent. We relate this interface to melt ponding, possibly favouring here deformation process such as grain-boundary sliding (EAGBS) due to lithospheric strain. Its geometry might have been controlled by inherited lithospheric fabrics and heterogeneous upper mantle structure. We evidence that crustal and mantle magmatic processes represent first order mechanisms to ease and locate the deformation during the first stage of a cratonic lithospheric breakup.
ISSN: 0956-540X

hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078/document
https://hal.archives-ouvertes.fr/hal-01622078/file/plasmanGJI2017.pdf
DOI : 10.1093/gji/ggx177

Éditeur(s) : HAL CCSD
Résumé : The mantle deformation processes that control the thinning and break-up of continental lithosphere remain poorly understood. Our knowledge is restricted to either lithospheric scale thermo-mechanical models --that use experimentally derived flow laws--, geophysical imaging and/or rare xenoliths from active continental rifts, such as the East African Rift System. The originality of this work relies on the study of the two largest outcrops of diamond facies subcontinental lithospheric mantle in the world: the Beni Bousera and Ronda peridotite massifs in N Morocco and S Spain, respectively. The structures and petrologic and metamorphic zoning preserved in these massifs --implying a polybaric and polythermal evolution-- provides a unique opportunity to investigate the thermo-mechanical evolution of thick subcontinental lithospheric mantle in extensional settings. In this thesis we studied the deformation mechanisms in both peridotites and pyroxenites to constrain the modes of exhumation of subcontinental lithospheric mantle from garnet-, to spinel-, and finally, to plagioclase lherzolite facies conditions. We combined field mapping of tectonometamorphic domains and structural mapping of ductile structures, microstructural analysis, crystal preferred orientations (CPO) measurements and conventional thermobarometric calculations and thermodynamic modeling (Perple_X) to unravel the pressure and temperature conditions of deformation. We showed that exhumation from garnet- to spinel lherzolite facies conditions was accommodated by fast shearing --in thermal disequilibrium--along a lithospheric scale transtensional shear zone. In this context, the petrological zoning and the large temperature gradient (ca. 100ºC/km) preserved in the Beni Bousera massif represent the mechanical juxtaposition of progressively deeper and hotter lithospheric levels at depths of ca. 60 km in the latest Oligocene (ca. 25 Ma). Final exhumation from spinel- to plagioclase facies lherzolite and emplacement into the crust is best recorded in the Ronda massif where it occurred by inversion and lithospheric scale folding of the highly attenuated continental lithosphere in a back-arc region, probably in relation with southward slab rollback and subsequent collision with the palaeo-Maghrebien passive margin in the early Miocene (21-23 Ma).
Les processus de déformation contrôlant l'amincissement de la lithosphère continentale sont encore mal contraints. Nos connaissances sont principalement basées sur la modélisation thermomécanique d'extension à l'échelle de la lithosphère--utilisant des lois rhéologiques derivées expérimentalement, l'imagerie géophysique et l'analyse de xénolithes provenant de rift continentaux actifs à ce jour, tels que le Rift Est-Africain. L'originalité de ce travail reside dans l'étude des deux plus grands massifs de péridotites sous-continentales ayant enregistrées des conditions primaires du facies à diamant: les massifs de Beni Bousera au nord du Maroc et de Ronda au sud de l'Espagne, respectivement. Les structures et la zonation petrologique et métamorphique --impliquant une évolution polybarique et polythermique-- préservéees dans ces massifs offrent une opportunité unique pour étudier l'évolution thermo-mécanique du manteau sous-continental dans un contexte extensif. Dans ce travail, nous avons étudié les mécanismes de déformation des péridotites et des pyroxénites afin de contraindre les modes d'exhumation du manteau lithosphérique sous-continental, depuis des conditions du facies des lherzolites à grenat, jusqu'au facies à spinelle et enfin à plagioclase. Nous avons combiné la cartographie des faciès tectono-métamorphiques et des structures ductiles de déformation, l'analyse des microstructures, la mesure d'orientations préférentielles de réseau (OPR), et la géothermobarométrie conventionelle couplée à la modélisation thermodynamique (PerpleX) afin de contraindre les conditions de pression et température de la déformation. Nous avons montré que l'exhumation précoce du facies à grenat au facies à spinelle était accomodée par une faille transtensive affectant le manteau lithosphérique. Dans ce contexte, la zonation tectono-métamorphique et le gradient thermique important (ca. 100ºC/km) préservés à Beni Bousera résultent de la juxtaposition mécanique de domaines lithosphériques initialement équilibrés à différentes pressions et températures, fossilisée à une profondeur de ca. 60 km durant l'Oligocène supérieur (ca. 25 Ma). L'exhumation finale du facies de lherzolite à spinelle au facies à plagioclase et l'emplacement final dans la croûte, mieux enregistrés dans Ronda, se sont produits par inversion et plissement de la section lithosphérique fortement amincie dans un contexte arrière-arc, probablement lors du retrait vers le sud de la lithosphère subduite et la collision de l'arc avec les paléo-marges maghrébines au Miocène inférieur (21-23 Ma).
https://tel.archives-ouvertes.fr/tel-00767700

tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700/document
https://tel.archives-ouvertes.fr/tel-00767700/file/THESE_Frets.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : The activity of the Damavand volcano (Central Alborz, northern Iran) began 1.8 Ma ago and continued up to 7 ka BP. Although the volcanic suite is clearly of shoshonitic affinity, only two petrographic types can be distinguished in the studied lavas: (1) weakly differentiated absarokites (49 < %SiO2 < 51), scattered around the volcano but with a regional extension, (2) highly differentiated banakites (59 < %SiO2 < 63), which form the bulk of the 4,000 m thick volcanic pile. All lavas are alkalic (3.7 < %K2O < 5), REE and LILE-rich (e.g., 85 < La < 148 ppm; 9 < Th < 32 ppm) and show highly fractionated REE patterns (69 < La/Yb < 115) and pronounced Nb-Ta negative anomalies. The absarokites are characterised by Sr (0.7045-0.7046) and Nd (0.51266-0.51269) isotope compositions close to the Bulk Earth values, and distinct from those of the banakites (0.7047 < Sr-87/Sr-86 < 0.7049, 0.51258 < Nd-143/Nd-144 < 0.51262). The Pb isotope ratios are also slightly lower in the absarokites than in the banakites (18.71 < Pb-206/Pb-204 < 18.77, 15.62 < Pb-207/Pb-204 < 15.63, 38.85 < Pb-208/Pb-204 < 38.91, and 18.77 < Pb-206/Pb-204 < 18.84, 15.62 < Pb-207/Pb-204 < 15.64, 38.94 < Pb-208/Pb-204 < 39.06, respectively). Overall, there is a clear tendency towards higher Sr, Pb and lower Nd isotope ratios with increasing degree of differentiation. This study suggests that the absarokites result from a low degree of partial melting (similar to 5%) of a highly metasomatized mantle source, which inherited its characteristics from an old subduction setting. The initiation of volcanic activity 1.8 Ma ago results from variations in the lithospheric thermal regime, probably related to lithospheric delamination as proposed for Anatolia (Pearce et al. 1990). The banakites are mainly generated by extensive fractional crystallisation (similar to 70%) of the absarokitic magma, with a limited amount (a few percents) of assimilation of an old crustal component, in the form of bulk assimilation or AFC processes, which both can explain the Sr, Nd and Pb isotope data.
ISSN: 1437-3254

hal-00411553
https://hal.archives-ouvertes.fr/hal-00411553
DOI : 10.1007/s00531-006-0159-6

Éditeur(s) : HAL CCSD
Résumé : International audience
The strength of the lithospheric mantle controls the mode of lithosphere deformation: the presence or absence ofa high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysicaldata question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling toquantify the impact of a ductile localizing mantle – instead of brittle – in triggering continental rifting. As a novelty,the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction,which may promote a significant strength drop and subsequent strain localization at low mantle temperature (<700-800°C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting thatmainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. Amedium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding tonarrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductilelocalizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at largestrain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting,although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geologicaland mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustalfaulting that are commonly observed in nature.
EGU General Assembly 2014
Vienne, Austria

insu-01565161
https://hal-insu.archives-ouvertes.fr/insu-01565161

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The origin of plate tectonics is one of the most fundamental issues in earth and planetary sciences. Laboratory experiments indicate that the viscosity of silicate rocks is so strongly temperature-dependent that the entire surface of the Earth should be one immobile rigid plate. The rheology of oceanic lithosphere is, however, still poorly understood, and there exist few constraints on the temperature dependency of viscosity on the field scale. Here we report a new kind of observational constraint based on the geoid along oceanic fracture zones. We identify a large number of conspicuous small-scale geoid anomalies, which cannot be explained by the standard evolution model of oceanic lithosphere, and estimate their source density perturbations using a new Bayesian inversion method. Our results suggest that they are caused most likely by small-scale convection involving temperature perturbations of ∼300 K±100 K∼300 K±100 K. Such thermal contrast requires the activation energy of mantle viscosity to be as low as View the MathML source100±50 kJmol−1 in case of diffusion creep, and View the MathML source225±112 kJmol−1 in case of dislocation creep, substantially reducing the thickness of the stiffest part of oceanic lithosphere. Oceanic lithosphere may thus be broken and bent much more easily than previously thought, facilitating the operation of plate tectonics.
ISSN: 0012-821X

hal-01467827
https://hal.archives-ouvertes.fr/hal-01467827
DOI : 10.1016/j.epsl.2016.05.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deformation of the continental lithosphere is traditionally modeled assuming that heat production in the subcontinental lithospheric mantle is negligible. Although this may be appropriate for highly depleted Archean lithosphere, studies of mantle xenoliths and lithospheric-derived mafic rocks suggest that heat productions of up to 0.4 ;μW/m3 may be attained in the mantle of Phanerozoic and Neoproterozoic regions due to modal metasomatism. To investigate the effect of a local enrichment in heat-producing elements within the lithospheric mantle on the continental deformation, we performed a series of 2D thermo-mechanical models simulating the deformation of a lithospheric plate 1000 km long, which contains in its central part a 200 km wide and 20 km-thick mantle layer with a heat production of 0.05;–0.25 ;μW/m3 between 40 and 80 km depth, leading to a local enhancement of the surface heat flow by 1;–5 mW/m2. Compression models show that a 20 km-thick layer with a heat production as low as 0.05 ;μW/m3 within the shallow lithospheric mantle leads to strain localization in both the enriched mantle and the overlying crust. Strain localization depends exponentially on the temperature increase in the lithosphere section, which is controlled by the volume of metasomatized mantle and the intensity of the metasomatic enrichment in heat-producing elements. A heat production of 0.25 μW/m3 between 60 and 80 km depth results, for instance, in strains within and above the metasomatized mantle 5 times higher than in the surrounding lithosphere. Strain localization also depends on the location of the heat-producing domain and on the plate rheological structure; deeper heat-producing domains and weaker plates leading to stronger localization. These results provide an explanation for strain localization in intraplate environments, leading to the formation of orogenic belts situated hundreds to thousands of kilometers away from known plate boundaries, as observed in the Neoproterozoic belts of Gondwana and in the present-day deformation of the Asian plate.
ISSN: 0012-821X

hal-00411386
https://hal.archives-ouvertes.fr/hal-00411386
DOI : 10.1016/j.epsl.2008.07.040

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
We present the results of dynamic modeling of the western Mediterranean that accounts for observed global positioning system (GPS) surface deformation of the Alboran Sea and surrounding Rif and Betic Mountains as the result of the combined effects of relative motion of the Eurasian and Nubian plates, low strength in the Alboran Sea region and sub-lithospheric processes occurring beneath the External Rif domain. Assuming that the lithosphere behaves elastically over the short time period of the GPS observations, an elastic plate model is considered in our study, including an area of weak lithosphere (factor of 10) centered on the Alboran Sea and in which lateral boundary conditions consist of the Nubia-Eurasia oblique convergence. Sub-crustal processes are modeled by application of a horizontal traction on a small area (patch) at the base of the elastic plate. Our modeling studies demonstrate the need for sub-crustal or sub-lithospheric, southwestward-directed forcing to account for observed southwestward motion of the Rif and Betic domains. Based on the location, orientation, and small area of the traction patch, we hypothesize that forcing is associated with delamination and rollback of the subducted African continental lithospheric mantle beneath the External Rif zone, due to the pull of the oceanic part of the Western Mediterranean slab, a dynamic process that may be similar to that where the over-riding plate is driven toward the subduction zone during slab rollback.
ISSN: 0091-7613

hal-00524546
https://hal.archives-ouvertes.fr/hal-00524546
DOI : 10.1130/G30963.1

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Two-dimensional simulations using a thermomechanical model based on a finite-difference method on a staggered grid and a marker in cell method are performed to study the plume-lithosphere interaction beneath moving plates. The plate and the convective mantle are modelled as a homogeneous peridotite with a Newtonian temperature- and pressure-dependent viscosity. A constant velocity, ranging from 5 to 12.5 cm yr−1, is imposed at the top of the plate. Plumes are generated by imposing a thermal anomaly of 150 to 350 K on a 50 km wide domain at the base of the model (700 km depth); the plate atop this thermal anomaly is 40 Myr old. We analyse (1) the kinematics of the plume as it impacts the moving plate, (2) the dynamics of time-dependent small-scale convection (SSC) instabilities developing in the low-viscosity layer formed by spreading of hot plume material at the base of the lithosphere and (3) the resulting thermal rejuvenation of the lithosphere. The spreading of the plume material at the base of the lithosphere, characterized by the ratio between the maximum down- and upstream horizontal (dimensionless) velocities in the plume-fed sublithospheric layer, Peup/Pedown depends on the ratio between the maximum plume upwelling velocity and the plate velocity, Peplume/Peplate. For fast plate velocities and sluggish plumes (low Peplume/Peplate), plate motion drags most plume material and downstream flow is dominant. As Peplume/Peplate increases, an increasing part of the plume material flows upstream. SSC systematically develops in the plume-fed sublithospheric layer, downstream from the plume. Onset time of SSC decreases with the Rayleigh number. For vigorous plumes, it does not depend on plate velocity. For more sluggish plumes, however, variations in the plume spreading behaviour at the base of the lithosphere result in a decrease in the onset time of SSCs with increasing plate velocity. In any case, SSC results in uplift of the isotherm 1573 K by up to 20 km relative to its initial equilibrium depth at the impact point.
ISSN: 0956-540X

hal-00856763
https://hal.archives-ouvertes.fr/hal-00856763
DOI : 10.1093/gji/ggt128

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
1] Recent statistical analysis by Lallemand et al. (2008) of subduction zone parameters revealed that the back-arc deformation mode depends on the combination between the subducting (nu(sub)) and upper (nu(up)) plate velocities. No significant strain is recorded in the arc area if plate kinematics verifies nu(up) = 0.5 vsub - 2.3 (cm/a) in the HS3 reference frame. Arc spreading ( shortening) occurs if nu(up) is greater ( lower) than the preceding relationship. We test this statistical law with numerical models of subduction, by applying constant plate velocities far away from the subduction zone. The subducting lithosphere is free to deform at all depths. We quantify the force applied on the two converging plates to sustain constant surface velocities. The simulated rheology combined viscous (non-Newtonian) and brittle behaviors, and depends on water content. The influence of subduction rate vs is first studied for a fixed upper plate. After 950 km of convergence ( steady state slab pull), the transition from extensional to compressive stresses in the upper plate occurs for vs similar to 1.4 cm/a. The effect of upper plate velocity is then tested at constant subduction rate. Upper plate retreat ( advance) with respect to the trench increases extension ( compression) in the arc lithosphere and increases ( decreases) the subducting plate dip. Our modeling confirms the statistical kinematic relationship between vsub and nu(up) that describes the transition from extensional to compressive stresses in the arc lithosphere, even if the modeled law is shifted toward higher rates of upper plate retreat, using our set of physical parameters ( e. g., 100 km thick subducting oceanic plate) and short- term simulations. Our results make valid the choice of the HS3 reference frame for assessing plate velocity influence on arc tectonic regime. The subduction model suggests that friction along the interplate contact and the mantle Stokes reaction could be the two main forces competing against slab pull for upper mantle subductions. Besides, our simulations show that the arc deformation mode is strongly time dependent.
ISSN: 1525-2027

hal-00412328
https://hal.archives-ouvertes.fr/hal-00412328
https://hal.archives-ouvertes.fr/hal-00412328/document
https://hal.archives-ouvertes.fr/hal-00412328/file/arcayG32008.pdf
DOI : 10.1029/2007GC001875