Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Rifting in a cratonic lithosphere is strongly controlled by several interacting processes including crust/mantle rheology, magmatism, inherited structure and stress regime. In order to better understand how these physical parameters interact, a 2 yr long seismological experiment has been carried out in the North Tanzanian Divergence (NTD), at the southern tip of the eastern magmatic branch of the East African rift, where the southward-propagating continental rift is at its earliest stage. We analyse teleseismic data from 38 broad-band stations ca. 25 km spaced and present here results from their receiver function (RF) analysis. The crustal thickness and Vp/Vs ratio are retrieved over a ca. 200 × 200 km2 area encompassing the South Kenya magmatic rift, the NTD and the Ngorongoro-Kilimanjaro transverse volcanic chain. Cratonic nature of the lithosphere is clearly evinced through thick (up to ca. 40 km) homogeneous crust beneath the rift shoulders. Where rifting is present, Moho rises up to 27 km depth and the crust is strongly layered with clear velocity contrasts in the RF signal. The Vp/Vs ratio reaches its highest values (ca. 1.9) beneath volcanic edifices location and thinner crust, advocating for melting within the crust. We also clearly identify two major low-velocity zones (LVZs) within the NTD, one in the lower crust and the second in the upper part of the mantle. The first one starts at 15–18 km depth and correlates well with recent tomographic models. This LVZ does not always coexist with high Vp/Vs ratio, pleading for a supplementary source of velocity decrease, such as temperature or composition. At a greater depth of ca. 60 km, a mid-lithospheric discontinuity roughly mimics the step-like and symmetrically outward-dipping geometry of the Moho but with a more slanting direction (NE–SW) compared to the NS rift. By comparison with synthetic RF, we estimate the associated velocity reduction to be 8–9 per cent. We relate this interface to melt ponding, possibly favouring here deformation process such as grain-boundary sliding (EAGBS) due to lithospheric strain. Its geometry might have been controlled by inherited lithospheric fabrics and heterogeneous upper mantle structure. We evidence that crustal and mantle magmatic processes represent first order mechanisms to ease and locate the deformation during the first stage of a cratonic lithospheric breakup.
ISSN: 0956-540X

hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078/document
https://hal.archives-ouvertes.fr/hal-01622078/file/plasmanGJI2017.pdf
DOI : 10.1093/gji/ggx177

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : Xylem density is a physical property of wood that varies between individuals, species and environments. It reflects the physiological strategies of trees that lead to growth, survival and reproduction. Measurements of branch xylem density, ρx, were made for 1653 trees representing 598 species, sampled from 87 sites across the Amazon basin. Measured values ranged from 218 kg m−3 for a Cordia sagotii (Boraginaceae) from Mountagne de Tortue, French Guiana to 1130 kg m−3 for an Aiouea sp. (Lauraceae) from Caxiuana, Central Pará, Brazil. Analysis of variance showed significant differences in average ρx across regions and sampled plots as well as significant differences between families, genera and species. A partitioning of the total variance in the dataset showed that species identity (family, genera and species) accounted for 33% with environment (geographic location and plot) accounting for an additional 26%; the remaining "residual" variance accounted for 41% of the total variance. Variations in plot means, were, however, not only accountable by differences in species composition because xylem density of the most widely distributed species in our dataset varied systematically from plot to plot. Thus, as well as having a genetic component, branch xylem density is a plastic trait that, for any given species, varies according to where the tree is growing in a predictable manner. Within the analysed taxa, exceptions to this general rule seem to be pioneer species belonging for example to the Urticaceae whose branch xylem density is more constrained than most species sampled in this study. These patterns of variation of branch xylem density across Amazonia suggest a large functional diversity amongst Amazonian trees which is not well understood.
ISSN: 1726-4170

hal-01032137
https://hal.archives-ouvertes.fr/hal-01032137

Éditeur(s) : HAL CCSD Landes Bioscience
Résumé : International audience
In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
Autophagy

hal-00735751
https://hal.archives-ouvertes.fr/hal-00735751
PUBMED : 22966490

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
Measurements of branch xylem density, D_x, were made for 1466 trees representing 503 species, sampled from 80 sites across the Amazon basin. Measured values ranged from 240 kg m^?3 for a Brosimum parinarioides from Tapajos in West Pará, Brazil to 1130 kg m^?3 for an Aiouea sp. from Caxiuana, Central Pará, Brazil. Analysis of variance showed significant differences in average D_x across the sample plots as well as significant differences between families, genera and species. A partitioning of the total variance in the dataset showed that geographic location and plot accounted for 33% of the variation with species identity accounting for an additional 27%; the remaining "residual" 40% of the variance accounted for by tree to tree (within species) variation. Variations in plot means, were, however, hardly accountable at all by differences in species composition. Rather, it would seem that variations of xylem density at plot level must be explained by the effects of soils and/or climate. This conclusion is supported by the observation that the xylem density of the more widely distributed species varied systematically from plot to plot. Thus, as well as having a genetic component branch xylem density is a plastic trait that, for any given species, varies according to where the tree is growing and in a predictable manner. Exceptions to this general rule may be some pioneers belonging to Pourouma and Miconia and some species within the genera Brosimum, Rinorea and Trichillia which seem to be more constrained in terms of this plasticity than most species sampled as part of this study.
ISSN: 1810-6277

hal-00298004
https://hal.archives-ouvertes.fr/hal-00298004
https://hal.archives-ouvertes.fr/hal-00298004/document
https://hal.archives-ouvertes.fr/hal-00298004/file/bgd-5-2003-2008.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report preliminary results of a seismological experiment, SEISMOTANZ'07, which consisted in the deployment of a local network (35 stations) in the East African Rift System (EARS), North Tanzania, during 6 months in 2007. We compare two earthquake sequences (Gelai and Manyara) occurring respectively in the southern end of the Kenya rift and in the North Tanzanian Divergence (NTD). Only distant of 150 km, their triggering mechanisms are different. None of the sequences depicts typical swarm or mainshock-aftershock patterns. They highlight the change in the magmatic/tectonic nature of the rift where the eastern branch of the EARS enters the Tanzanian craton. The similar shape and long-axis of the elongate sequences emphasize the preferred locus of active strain release along NE-SW discontinuities which probably root at depth into steep Proterozoic shear zones. At Gelai, the deformation is dominated by aseismic process involving slow slip on normal fault and dyke intrusion within the upper crust Calais_et_al_2008. The spatial and temporal earthquake distribution indicates a possible correlation between the Gelai crisis and the eruption of the nearby Oldoinyo Lengai volcano. At Manyara, the sequence is more uncommon, revealing a long-lasting seismic activity deepely rooted (20-35 km depth) possibly related to stress loading transmitted laterally. The yield stress envelope modelled from the depth frequency distribution of earthquakes in the NTD is consistent with the presence of a mafic lower crust and further supports the strength increase of the rifted crust from south Kenya to the NTD.
ISSN: 0899-5362

hal-00420599
https://hal.archives-ouvertes.fr/hal-00420599
DOI : 10.1016/j.jafrearsci.2009.09.005