Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Laboratory models have been conducted to improve our understanding of the role that the resistance of the slab to bending and its coupling to the ambient mantle play in subduction dynamics over geological time scales. Our models are set up with a viscous plate of silicone (lithosphere) subducting under negative buoyancy in a viscous layer of glucose syrup (mantle). For our study, the lithosphere/upper mantle viscosity contrast has been systematically varied, from similar to 10 to similar to 10(5) in order to explore the parameter space between weak and strong slab dynamics. We found that subduction is characterized by a retreating mode for viscosity ratios > 10(4), by the coexistence of a retreating mode and an advancing mode for viscosity ratios between similar to 10(4) and similar to 10(2), and quasi-stationary, Rayleigh-Taylor like behaviour for ratios < 10(2). By combining our experimental results and kinematic data from current subduction zones in four reference frames which differ in the amount of net rotation, we infer that a lithosphere/upper mantle viscosity contrast of 150-500 is necessary to obtain realistic trench/subducting plate velocity ratios as well as the variability of subduction styles observed in nature.
ISSN: 0012-821X

hal-00412008
https://hal.archives-ouvertes.fr/hal-00412008
DOI : 10.1016/j.epsl.2008.04.006

Éditeur(s) : HAL CCSD Springer
Résumé : Subduction is a major process that plays a first-order role in the dynamics of the Earth. The sinking of cold lithosphere into the mantle is thought by many authors to be the most important source of energy for plates driving forces. It also deeply modifies the thermal and chemical structure of the mantle, producing arc volcanism and is responsible for the release of most of the seismic energy on Earth. There has been considerable achievements done during the past decades regarding the complex interactions between the various processes acting in subduction zones. This volume contains a collection of contributions that were presented in June 2007 in Montpellier (France) during a conference that gave a state of the art panorama and discussed the perspectives about "Subduction Zone Geodynamics". The papers included in this special volume offer a unique multidisciplinary picture of the recent research on subduction zones geodynamics. They are organized into five main topics: Subduction zone geodynamics, Seismic tomography and anisotropy, Great subduction zone earthquakes, Seismogenic zone characterization, Continental and ridge subduction processes. Each of the 13 papers collected in the present volume is primarily concerned with one of these topics. However, it is important to highlight that papers always treat more than one topic so that all are related lighting on different aspects of the complex and fascinating subduction zones geodynamics.
https://hal.archives-ouvertes.fr/hal-00808864

ISBN : 978-3-540-87974
hal-00808864
https://hal.archives-ouvertes.fr/hal-00808864

Éditeur(s) : HAL CCSD Elsevier
Résumé : The motion of oceanic plates is commonly related to the subduction of cold and dense oceanic material into the mantle. These models predict plate velocities from subduction velocities but the trench motion is not directly included in the computation. Here, using a recent compilation of a global data set, we found that the motion of trenches (either advancing or retreating with respect to upper plates) scales with their corresponding subducting plates motion. Based on simple experimental tests, we found that subduction of strong slabs inside the upper mantle correctly predicts these kinematic relationships. We deduce that the motion of the trenches represent the surface manifestation of the resistance encountered by the subducting lithosphere to bend and penetrate within the upper mantle.
ISSN: 0012-821X

hal-00407200
https://hal.archives-ouvertes.fr/hal-00407200
DOI : 10.1016/j.epsl.2007.02.016

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Giant earthquake (moment magnitude M-w >= 8.5) forecasts for subduction zones have been empirically related to both tectonic stresses and geometrical irregularities along the subduction interface. Both of these controls have been suggested as able to tune the ability of rupture to propagate laterally and, in turn, exert an important control on giant earthquake generation. Here we test these hypotheses, and their combined influence, by compiling a dataset of trench fill thickness (a proxy for smoothing of subducting plate relief by sediment input into the subduction channel) and upper plate strain (a proxy for the tectonic stresses applied to the subduction interface) for 44 segments of the global subduction network. We statistically compare relationships between upper plate strain, trench sediment thickness and maximal earthquake magnitude. We find that the combination of both large trench fill (>= 1 km) and neutral upper plate strain explains spatial patterns of giant earthquake occurrence to a statistically significant degree. In fact, the concert of these two factors is more highly correlated with giant earthquake occurrence than either factor on its own. Less frequent giant earthquakes of lower magnitude are also possible at subduction zones with thinner trench fill and compressive upper plate strain. Extensional upper plate strain and trench fill < 0.5 km appear to be unfavorable conditions, as giant earthquakes have not been observed in these geodynamical environments during the last 111 years. Citation: Heuret, A., C. P. Conrad, F. Funiciello, S. Lallemand, and L. Sandri (2012), Relation between subduction megathrust earthquakes, trench sediment thickness and upper plate strain, Geophys. Res. Lett., 39, L05304, doi: 10.1029/2011GL050712.
ISSN: 0094-8276

hal-00745636
https://hal.archives-ouvertes.fr/hal-00745636
https://hal.archives-ouvertes.fr/hal-00745636/document
https://hal.archives-ouvertes.fr/hal-00745636/file/heuretGRL2012.pdf
DOI : 10.1029/2011GL050712

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
New estimates of trench migration rates allow us to address the dynamics of trench migration and back-arc strain. We show that trench migration is primarily controlled by the subducting plate velocity V-sub, which largely depends on its age at the trench. Using the hot and weak arc to back-arc region as a strain sensor, we define neutral arcs characterized by the absence of significant strain, meaning places where the forces (slab pull, bending, and anchoring) almost balance along the interface between the plates. We show that neutral subduction zones satisfy the kinematic relation between trench and subducting plate absolute motions: V-t = 0.5V(sub) - 2.3 (in cm a(-1)) in the HS3 reference frame. Deformation occurs when the velocity combination deviates from kinematic equilibrium. Balancing the torque components of the forces acting at the trench indicates that stiff (old) subducting plates facilitate trench advance by resisting bending.
ISSN: 0278-7407

hal-00411731
https://hal.archives-ouvertes.fr/hal-00411731
https://hal.archives-ouvertes.fr/hal-00411731/document
https://hal.archives-ouvertes.fr/hal-00411731/file/Lallemand2008-Tectonics.pdf
DOI : 10.1029/2007TC002212

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Giant earthquakes (Mw≥8.5) usually occur on the boundary between subducting and overriding plates of converging margins, but it is not yet clear which (if any) subduction zones are more prone to produce such a kind of events. Here we show that subduction zones may have different capabilities to produce giant earthquakes. We analyze the frequency-magnitude distribution of the interplate earthquakes at subduction zones that occurred during 1976–2007 and calculate the propensity (defined as the average annual rate) of giant events for about half of the subduction zones. We find that the b value of interplate earthquakes is significantly different among the subduction zones, and out-of-sample giant earthquakes (before 1976 and after 2007) have occurred preferentially in high-propensity areas. Besides the importance for seismic hazard assessment and risk mitigation, our results seem to indicate that a higher seismicity rate does not necessarily imply a higher likelihood to generate giant earthquakes, and the way in which the stress is released at a subduction interface does not change significantly after the occurrence of such events.
ISSN: 0148-0227

hal-01467738
https://hal.archives-ouvertes.fr/hal-01467738
DOI : 10.1002/2016JB013054

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : The seismology is the most effective method to explore the Structure of subduction zones to great depth. The distinguishing feature of the mantle in the subduction regions is the presence of hydrated phases, which transport water into the Earth's interior and release it with dramatic local consequences, triggering earthquakes and melting. The seismological detection of these hydrous phases and geo-dynamic interpretation of flow in the hydrous mantle depend on knowledge of the anisotropic elastic properties and the characteristics of the wave propagation in anisotropic media. In this paper we briefly recall the distinguishing features of anisotropic wave propagation and the observable parameters. We suggest the Vp/Vs ratio is a physically sound parameter than can be observed by seismology in anisotropic regions of the Earth, whereas the Poisson's ratio, which is often quoted, is not directly observable and does not correspond to the characteristics of wave propagation in an anisotropic or isotropic medium. We report for the first time the ratios of Vp/Vs1 and Vp/Vs2, where Vs1 is the fastest and Vs2 slowest S-wave velocities of an anisotropic media. We present the current knowledge of the anisotropic seismic properties of hydrous minerals in the upper mantle, transition zone, and lower mantle that are stable along low temperature geotherms associated with subduction, and identify which minerals are likely to influence seismological observations because they have very high volume fractions, or very high anisotropies, or both of these.;In the upper mantle antigorite and talc are exceptionally anisotropic (Vp 71% Vs 68% and Vp 65%, Vs 68%, respectively) and chlorite is also very anisotropic for S-waves (Vp 35%, Vs 76%). Comparatively less anisotropic are hornblende (Vp 27%, Vs 31%), used as proxy for tremolite in subduction zones, and clinohumite (21.8%, Vs 15.9%). Brucite at 4 GPa (Vp 26.5%, Vs 30.9%) and the dense hydrogen magnesium silicate (DHMS) phase A at 9GPa (Vp 9.3%, Vs 17.6%) are the only hydrous minerals stable in the upper mantle that have had their elastic properties measured at in situ mantle pressures. Except for the phase A, all these minerals are more anisotropic than olivine for at least one parameter (Vp, Vs, Vp/Vs1, or Vp/Vs2). In the transition zone the major phases hydrous wadsleyite and ringwoodite C have moderate to weak anisotropies (Vp 16.3%, Vs 16.5%, and Vp 1.9%, Vs 4.4%, respectively). The DHMS Superhydrous B has a moderate anisotropy (Vp 6.9%, Vs 11.6%). At greater depth the DHMS phase D Lit 24 GPa (Vp 10.8%, Vs 18.0%) is the only hydrous phase that can transport hydrogen from the transition zone into the lower mantle. The phase D is more anisotropic for S than P waves like many of the hydrous phases. From these data it is clear that hydrous phases are in general very anisotropic. However, pressure can play a strong role in reducing anisotropy. It is the case for brucite and talc, in which increasing pressure from ambient to 4 GPa reduces the anisotropy by about 50% for both P and S waves. In contrast, the anisotropy of the DHMS phase A does not change significantly with pressure.;Our picture of the seismic anisotropy of hydrated minerals remains incomplete; the elastic properties of many have not been measured even at ambient conditions (e.g., 10 angstrom phase and phase E) or not measured in their true elastic symmetry (e.g., clinochlore). The majority of hydrous minerals have not been measured at high pressure. and none related to hydrated mantle have been measured at elevated temperature. We have shown in the few cases where hydrous minerals have been measured as a function of pressure, that this variable has an important effect oil the velocity distribution and in most cases reduces the degree of anisotropy, hence we Would expect seismic anisotropy to play a key role in the determination of the shallow structure of subduction zones in the upper mantle.
Subduction zone geodynamics

hal-00420893
https://hal.archives-ouvertes.fr/hal-00420893

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : The Chile-Argentina Patagonian Cordillera is a natural laboratory to study the interactions between oceanic and continental lithosphere during the subduction of an active spreading ridge beneath a continent. Subduction of the South Chile spreading ridge, which separates the Nazca plate from the Antarctic plate, started around 15–14 Ma at the southern tip of Patagonia. Presently, the southernmost segment of the Chile Ridge enters the Peru-Chile trench at 46°S, at the site of the Chile Triple Junction (CTJ). We review the main events which occurred on land in the CTJ region (46–47°S), related with processes of ridge subduction. We summarize tectonic, sedimentary, and magmatic features in a 30 Ma-to Present chronological table. A preridge subduction stage, from 30 to 15 Ma, is characterized by the onset and growth of Patagonian relief and by a shift from marine to continental detrital sedimentation in the foreland at 20–22 Ma. The change from pre-ridge subduction to ridge subduction is marked on land by a transition from calc-alkaline to alkaline volcanism, at 14–12 Ma, and by the onset of eruption of very large fl ood basalt provinces (future volcanic plateaus) following rapid erosion of the eastern foreland belt. Post-plateau basaltic volcanism (<4 Ma) is coeval with a period of tectonic and morphological rejuvenation during which the eastern foreland of the Cordillera has been affected by extensional/transtensional tectonics. We place these events in the framework of a tectonomagmatic model involving the opening of slab windows due to both slab tear and ridge axis subduction.
Subduction Zone Geodynamics

hal-00421053
https://hal.archives-ouvertes.fr/hal-00421053
DOI : 10.1007/978-3-540-87974-9_12

Éditeur(s) : HAL CCSD Elsevier
Résumé : A combination of statistical studies on present-day subduction zones and three-dimensional (3D) laboratory models is performed with the aim to clarify the way that plate kinematics control the geometry of the slab and the overriding plate deformation in subduction zones. In 3D laboratory models, the analogue of a two layer linearly viscous lithosphere–upper mantle system is achieved by means of silicon putty glucose syrup tank experiment. The subducting and overriding plate velocities are systematically changed by exploring the variability field of natural plate kinematics. Both statistical and modelling approaches recognize the importance of overriding plate motion on subduction process behavior: (1) trenches migrate at a rate close to the overriding plate motion, but always move slower than the overriding plates. The mechanism at work is a direct consequence of “slab anchoring” opposed by both lithosphere and mantle viscous resistance and is responsible for overriding plate deformation and slab geometry variability. (2) An overriding plate shortens when the overriding plate moves toward the trench and conditions that are favourable for overriding plate extension are created when the overriding plate moves away from the trench. (3) Shallow and steep dips are found if the overriding plate moves toward and away from the trench, respectively.
ISSN: 0012-821X

hal-00406598
https://hal.archives-ouvertes.fr/hal-00406598
DOI : 10.1016/j.epsl.2007.02.004