Éditeur(s) : Amer Geophysical Union
Résumé : The Algerian margin has originated from the opening of the Algerian basin about 25-30 Ma ago. The central margin provides evidence for large-scale normal faults of Oligo-Miocene age, whereas transcurrent tectonics characterizes the western margin. A set of NW-SE oriented dextral transform faults was active during basin opening and divided the 600 km long central margin into segments of similar to 120-150 km. The upper Miocene, Plio-Quaternary, and present-day tectonic setting is, however, compressional and supports the occurrence of a margin inversion, a process still poorly documented worldwide. We show that the central Algerian margin represents a rare example of inverted margin, where the process of subduction inception is particularly well expressed and helps understand how extensional and transtensive structures are involved in margin shortening. Using multibeam bathymetry and multichannel seismic reflection sections from the MAR-ADJA 2003 and 2005 cruises, we evidence Pliocene-Pleistocene shortening with contrasting styles along the margin between west (Khayr Al Din bank) and east (Boumerdes-Dellys margin) of Algiers. Pre-Miocene structures such as basement highs and transform faults appear to control changes of the deformation pattern along this part of the margin, resulting in different widths, geometries, and relative positions of folds and faults. Plio-Quaternary and active blind thrust faults do not reuse Oligo-Miocene normal and transform faults during inversion, but instead grow within the continental margin (as testified for instance by the 21 May 2003 M-w 6.8 Boumerdes-Zemmouri earthquake), at the foot of the continental slope and at the northern sides of basement highs interpreted as stretched continental blocks of the rifted margin. The inherited structures of the margin appear, therefore, to determine this deformation pattern and ultimately the earthquake and tsunami sizes offshore. The complex geometry of the fault system along the Algerian margin suggests a process of initiation of subduction in its central and eastern parts.
Tectonics (0278-7407) (Amer Geophysical Union), 2010-03 , Vol. 29 , N. TC2008 , P. 1-22

Droits : 2010 American Geophysical Union
http://archimer.ifremer.fr/doc/00008/11883/9286.pdf
http://archimer.ifremer.fr/doc/00008/11883/9287.pdf
DOI:10.1029/2009TC002547
http://archimer.ifremer.fr/doc/00008/11883/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
1] Recent statistical analysis by Lallemand et al. (2008) of subduction zone parameters revealed that the back-arc deformation mode depends on the combination between the subducting (nu(sub)) and upper (nu(up)) plate velocities. No significant strain is recorded in the arc area if plate kinematics verifies nu(up) = 0.5 vsub - 2.3 (cm/a) in the HS3 reference frame. Arc spreading ( shortening) occurs if nu(up) is greater ( lower) than the preceding relationship. We test this statistical law with numerical models of subduction, by applying constant plate velocities far away from the subduction zone. The subducting lithosphere is free to deform at all depths. We quantify the force applied on the two converging plates to sustain constant surface velocities. The simulated rheology combined viscous (non-Newtonian) and brittle behaviors, and depends on water content. The influence of subduction rate vs is first studied for a fixed upper plate. After 950 km of convergence ( steady state slab pull), the transition from extensional to compressive stresses in the upper plate occurs for vs similar to 1.4 cm/a. The effect of upper plate velocity is then tested at constant subduction rate. Upper plate retreat ( advance) with respect to the trench increases extension ( compression) in the arc lithosphere and increases ( decreases) the subducting plate dip. Our modeling confirms the statistical kinematic relationship between vsub and nu(up) that describes the transition from extensional to compressive stresses in the arc lithosphere, even if the modeled law is shifted toward higher rates of upper plate retreat, using our set of physical parameters ( e. g., 100 km thick subducting oceanic plate) and short- term simulations. Our results make valid the choice of the HS3 reference frame for assessing plate velocity influence on arc tectonic regime. The subduction model suggests that friction along the interplate contact and the mantle Stokes reaction could be the two main forces competing against slab pull for upper mantle subductions. Besides, our simulations show that the arc deformation mode is strongly time dependent.
ISSN: 1525-2027

hal-00412328
https://hal.archives-ouvertes.fr/hal-00412328
https://hal.archives-ouvertes.fr/hal-00412328/document
https://hal.archives-ouvertes.fr/hal-00412328/file/arcayG32008.pdf
DOI : 10.1029/2007GC001875

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
In Eastern China, the North China Block (NCB) has experienced a complex tectonic evolution during Late Palaeozoic to Mesozoic times. The unconformable sedimentary cover, which ranges in age from Neoproterozoic to Permian, underwent two tectonic episodes in Early Triassic and Cretaceous times. An early north–south compressional phase, D1, characterized by north-verging recumbent folds with east–west-trending axes and top-to-the-north ductile shear zones can be observed in a gabbroic pluton and the Neoproterozoic sedimentary host rocks. The available radiometric ages allow us to interpret this event as an Early Triassic back-thrusting related to the final stage of the collision between the North China and South China Blocks. During the LateMesozoic, an extensional event characterized by (1) half-grabens filled by continental terrigeneous red beds and lava flows, (2) low-angle detachment faults, (3) synkinematic granitic plutons, and (4) metamorphic core complexes is widespread in the Eastern Liaoning Peninsula. This extensional D2 event can be subdivided into a ductile deformation and a brittle deformation, corresponding to different expressions of crustal deformation. In every area studied in the Eastern Liaoning Peninsula, the ductile D2 deformation is characterized by a NW–SE-trending stretching lineation with a top-to-the-NWsense of shear.Mica and amphibole fromthe metamorphic country rocks, granodioritic or monzogranitic plutons and their mylonitized margins yield 40Ar/39Ar ages ranging from 130 to 120 Ma. These dates support fast cooling and exhumation rates coeval with the extensional tectonics. The brittle D2 deformation is responsible for the formation of high-angle normal faults marked by low-temperature cataclasites bounding half-grabens. During the Mesozoic, the tectonic regime of Eastern China experienced a significant inversion from compression to extension. The Eastern Liaoning Peninsula massif provides an example of this geodynamic transition.
ISSN: 2041-4927

hal-00134055
https://hal-insu.archives-ouvertes.fr/hal-00134055
DOI : 10.1144/SP280.7

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : International audience
The seaward extension of onshore formations and structures were previously almost unknown in Provence. The interpretation of 2D high-resolution marine seismic profiles together with the integration of sea-bottom rock samples provides new insights into the stratigraphic, structural and paleogeographic framework of pre-Messinian Salinity Crisis (MSC) deposits of the Provence continental shelf. Seven post-Jurassic seismic units have been identified on seismic profiles, mapped throughout the offshore Provence area and correlated with the onshore series. The studied marine surface and sub-surface database provided new insights into the mid and late Cretaceous paleogeography and structural framework as well as into the syn-and post-rift deformation in Provence. Thick (up to 2000 m) Aptian-Albian series whose deposition is controlled by E-W-trending faults are evidenced offshore. The occurrence and location of the Upper Cretaceous South-Provence basin is confirmed by the thick (up to 1500 m) basinal series downlaping the Aptian-Albian unit. This basin was fed in terrigenous sediments by a southern massif (" Massif Méridional ") whose present-day relict is the Paleozoic basement and its sedimentary cover from the Sicié imbricate. In the bay of Marseille, thick syn-rift (Rupelian to Aquitanian) deposition occurred (>1000 m). During the rifting phase, syn-sedimentary deformations consist of dominant N040 to N060 sub-vertical faults with a normal component and N050 drag-synclines and anticlines. The syn-rift and early post-rift units (Rupelian to early Burdigalian) are deformed and form a set of E-W-trending en echelon folds that may result from sinistral strike-slip reactivation of N040 to N060 normal faults during a N-S com-pressive phase of early-to-mid Burdigalian age (18-20 Ma). Finally, minor fault reactivation and local folding affect post-rift deposits within a N160-trending corridor localized south of La Couronne, and could result from a later, post-Burdigalian and pre-Pliocene compressive phase.
Cadre tectonostratigraphique des formations anté-pliocènes du plateau continental de Provence (golfe du Lion oriental, SE France) Mots-clés. – Géologie marine, Tectonostratigraphie, Stratigraphie sismique, Paléogéographie crétacée, Rifting oligo-miocène, Compression post-rift Résumé. – Le prolongement en mer des formations et des structures provençales était jusqu'alors largement inconnu.L'interprétation de profils de sismique-réflexion marine 2D et l'intégration de dragages et carottages du fond-marin ont permis d'apporter des éléments nouveaux concernant le cadre stratigraphique, structural et paléogéographique des dé-pôts anté-Messiniens du plateau continental de Provence. Sept unités sismiques post-jurassiques ont été identifiées sur les profils sismiques, cartographiées à travers le plateau continental et corrélées avec les séries affleurant à terre. Une épaisse unité apto-albienne (jusqu'à 2000 m) dont le dépôt est contrôlé par des failles E-W a été mise en évidence en mer. L'existence d'un bassin subsident au Crétacé supérieur sur le plateau continental de Provence a été confirmée par le développement d'une épaisse série de bassin (jusqu'à 1500 m) reposant en downlap sur l'Apto-Albien. Le socle mé-tamorphique de l'écaille de Sicié et sa couverture sédimentaire peut être considéré comme une relique allochtone du « Massif Méridional » ayant alimenté le Bassin sud-provençal en éléments terrigènes au Crétacé supérieur. Dans la rade de Marseille, une épaisse unité syn-rift (Rupélien à Aquitanien) a été mise en évidence (>1000 m), structurée en une série de synformes en échelon d'axe E-W et affectée par des failles d'orientation dominante N040 à N060. Sur le flanc sud des synformes, la formation de plis d'axe N050 est associée à une déformation syn-sédimentaire. La formation des synformes en échelon d'axe E-W résulterait d'une réactivation en décrochement des failles N040 à N060 pendant une phase de compression N-S dont l'âge est compris entre le Burdigalien inférieur et moyen (18-20 Ma). Enfin, les dépôts post-rift sont affectés par des déformations mineures (réactivation de failles et plis associés), le long d'un couloir d'orientation N160 à l'ouest de la baie de Marseille, attribuables à une phase de compression post-burdigalienne et anté-pliocène.
ISSN: 0037-9409

hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727/document
https://hal-amu.archives-ouvertes.fr/hal-01463727/file/Fournier_et_al_Provence_2016.pdf
DOI : 10.2113/gssgfbull.187.4-5.187

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In Western Mediterranean, the Rif belt in Morocco is part of the Gibraltar Arc built during the Tertiary in the framework of Eurasia-Africa convergence. The structural and metamorphic evolution of the internal units of this belt as well as their timing, crucial to constrain the geodynamic evolution of the Alboran Sea, is still largely debated.Our study on the Ceuta Peninsula (Northern Rif) provides new structural, petrological and geochronological data (U-Th-Pb, Ar-Ar), which allow to precise the tectono-metamorphic evolution of the Lower Sebtides metamorphic units with:(1) a syn-metamorphic thrusting event developed under granulite facies conditions (7–10 kbar and 780–820 °C). A major thrust zone, the Ceuta Shear Zone, drove the emplacement of metapelites and peridotitic lenses from the Ceuta Upper Unit over the orthogneisses of the Monte Hacho Lower Unit. This compressional event ended during the Upper Oligocene.(2) an extensional event developed at the boundary between amphibolite and greenschist facies conditions (400–550 °C and 1–3 kbar). During this event, the Ceuta Shear Zone has been reactivated as a normal fault. Normal ductile shear zones contributed to the final exhumation of the metamorphic units during the Early Miocene.We propose that the compressional event is related to the formation of an orogenic wedge located in the upper plate, in a backward position, of the subduction zone driving the geodynamic evolution of the Alboran domain. In this context, the episode of lithospheric thinning could be related to the opening of the Alboran basin in a back-arc position.Furthermore, unlike the previous models proposed for the Rif belt, the tectonic coupling between mantle peridotites and crustal metamorphic rocks occurred in Ceuta Peninsula at a depth of 20–30 km under high temperature conditions, before the extensional event, and thus cannot be related to the back-arc extension.
ISSN: 0040-1951

insu-01682810
https://hal-insu.archives-ouvertes.fr/insu-01682810
DOI : 10.1016/j.tecto.2017.11.028

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
The Pyrenean mountain range is a slowly deforming belt with continuous and moderate seismic activity. To quantify its deformation field, we present the velocity field estimated from a GPS survey of the Pyrenees spanning 18 yr. The PotSis and ResPyr networks, including a total of 85 GPS sites, were installed and first measured in 1992 and 1995–1997, respectively, and remeasured in 2008 and 2010. We obtain a deformation field with velocities less than 1 mm yr−1 across the range. The estimated velocities for individual stations do not differ significantly from zero with 95 per cent confidence. Even so, we estimate a maximum extensional horizontal strain rate of 2.0 ± 1.7 nanostrain per year in a N–S direction in the western part of the range. We do not interpret the vertical displacements due to their large uncertainties. In order to compare the horizontal strain rates with the seismic activity, we analyse a set of 194 focal mechanisms using three methods: (i) the ‘r’ factor relating their P and T axes, (ii) the stress tensors obtained by fault slip inversion and (iii) the strain-rate tensors. Stress and strain-rate tensors are estimated for: (i) the whole data set, (ii) the eastern and western parts of the range separately, and (iii) eight zones, which are defined based on the seismicity and the tectonic patterns of the Pyrenees. Each of these analyses reveals a lateral variation of the deformation style from compression and extension in the east to extension and strike-slip in the west of the range. Although the horizontal components of the strain-rate tensors estimated from the seismic data are slightly smaller in magnitude than those computed from the GPS velocity field, they are consistent within the 2σ uncertainties. Furthermore, the orientations of their principal axes agree with the mapped active faults.
ISSN: 0956-540X

hal-01171752
https://hal.archives-ouvertes.fr/hal-01171752
DOI : 10.1093/gji/ggv052

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The emergent domain known as “Kasserine Island” in central Tunisia, to the West of the North–South Axis, was emerging during the Turonian. This area has undergone several changes during the Cretaceous–Eocene period. In the present study, the compilation of surface and sub-surface data provided new information about the boundaries variations of the emerged domain. The analysis of paleogeographic maps allowed the identification of three distinct stages of evolution. The first stage extents from the Middle Turonian to the Lower Maastrichtian where the emergent domain covers the area extending from Jebels Selloum-Sidi Aich in the West to Jebel Bouhedma in the East. The boundaries of this area coincide with the E–W Kasserine fault to the North, the N–S Lessouda-Boudinar fault in the East and the N 120 el Mech-Souinia flexure at the South. This emersion contemporaneous with a high eustatic level is most likely related to tectonic activity. The extensional tectonic regime that is characterized by a NE–SW minimal horizontal stress, has reactivated border faults with a normal component. The interference of the tilting of these border faults was at the origin of the emergence of this domain. The ascent of the Triassic salt may also have contributed in this uplift.In the second stage, the emerged domain has reached its maximum expansion to the North, the West and the South during the Middle Maastrichtian–Paleocene period. Its northern limit is irregular, while the southern limit coincides with the N120 Gafsa fault and the E–W fault of Jebels Orbata-Bouhedma. The N–S Lessouda-Boudinar fault forms the eastern limit. This expansion is mostly related to the global eustatic fall that is well characterized during this period, and partly to the compressive tectonic activity.The Lower Eocene is characterized by a marine transgression that has interested the northern edge of the Island, where the Ypresian deposits are discordant on older series. This edge was irregular and marked by the Gulf of Sbiba. The eastern, the southern, and the western boundaries kept the same shape as that of the previous stage. The compressive tectonic regime, characterized by a NW–SE maximum horizontal stress, is accentuated. This constraint state has generated NE–SW folds and NW–SE grabens. Some of these structures allowed the accumulation of a thick phosphate deposits at their edges, and continental deposits in the emerged area.During the Middle to Upper Eocene, the emergent area narrowed further at the North. The deposits are transgressive and discordant on older series. The Other limits always coincide with the Gafsa fault, the Jebels Orbata-Bouhedma and Jebels Lessouda-Boudinar faults. This period is characterized by the filling of the Gafsa basin by evaporate deposits before its emergence in the Oligocene. As a result, the southern-central Tunisia emerged as one area.
ISSN: 0899-5362

hal-01243490
https://hal.archives-ouvertes.fr/hal-01243490
DOI : 10.1016/j.jafrearsci.2015.07.027

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Giant earthquake (moment magnitude M-w >= 8.5) forecasts for subduction zones have been empirically related to both tectonic stresses and geometrical irregularities along the subduction interface. Both of these controls have been suggested as able to tune the ability of rupture to propagate laterally and, in turn, exert an important control on giant earthquake generation. Here we test these hypotheses, and their combined influence, by compiling a dataset of trench fill thickness (a proxy for smoothing of subducting plate relief by sediment input into the subduction channel) and upper plate strain (a proxy for the tectonic stresses applied to the subduction interface) for 44 segments of the global subduction network. We statistically compare relationships between upper plate strain, trench sediment thickness and maximal earthquake magnitude. We find that the combination of both large trench fill (>= 1 km) and neutral upper plate strain explains spatial patterns of giant earthquake occurrence to a statistically significant degree. In fact, the concert of these two factors is more highly correlated with giant earthquake occurrence than either factor on its own. Less frequent giant earthquakes of lower magnitude are also possible at subduction zones with thinner trench fill and compressive upper plate strain. Extensional upper plate strain and trench fill < 0.5 km appear to be unfavorable conditions, as giant earthquakes have not been observed in these geodynamical environments during the last 111 years. Citation: Heuret, A., C. P. Conrad, F. Funiciello, S. Lallemand, and L. Sandri (2012), Relation between subduction megathrust earthquakes, trench sediment thickness and upper plate strain, Geophys. Res. Lett., 39, L05304, doi: 10.1029/2011GL050712.
ISSN: 0094-8276

hal-00745636
https://hal.archives-ouvertes.fr/hal-00745636
https://hal.archives-ouvertes.fr/hal-00745636/document
https://hal.archives-ouvertes.fr/hal-00745636/file/heuretGRL2012.pdf
DOI : 10.1029/2011GL050712

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study analyzes the active tectonics within the northwestern and southeastern extensions of the Pambak-Sevan-Syunik fault (PSSF), a major right-lateral strike-slip fault cutting through Armenia. Quantifying the deformations in terms of geometry, kinematics, slip rates and earthquake activity, using cosmogenic 3He, OSL/IRSL and radiocarbon dating techniques, reveal different behaviors between the two regions. Within the northwestern extension, in the region of Amasia, the PSSF bends to the west and splits into two main WNW–ESE trending reverse faults defining a compressional pop-up structure. We estimate an uplift rate and a shortening rate of 0.5 ± 0.1 mm/y and 1.4 ± 0.6 mm/y, respectively. This suggests that most of the ∼2 mm/y right lateral movement of the PSSF seems to be absorbed within the Amasia pop-structure. Within the southeastern extension, the PSSF shows signs of dying out within the Tsghuk Volcano region at the southernmost tip of the Syunik graben. There, the tectonic activity is characterized by a very slow NS trending normal faulting associated with a slight right-lateral movement. Slip rates analyses (i.e. vertical slip rate, EW stretching rate at 90° to the fault, and right-lateral slip rate of ∼0.2 mm/y, ∼0.1 mm/y and ∼0.05 mm/y, respectively) lead to the conclusion that the right lateral movement observed further north along the PSSF is mainly transferred within other active faults further west within the Karabagh (Hagari fault or other structures further northwestwards). Comparing our slip rates with those estimated from GPS data suggests that most of the deformation is localized and seismic, at least within the Tsghuk region. The geometrical and kinematic pattern observed within the two terminations of the PSSF suggests that the fault and its surrounding crustal blocks are presently rotating anticlockwise, as also observed within the GPS velocity field. This is consistent with the recent kinematic models proposed for the Caucasus-Kura-South Caspian region and brings a new insight into the present geodynamics of Armenia.
ISSN: 1040-6182

hal-01307342
https://hal.archives-ouvertes.fr/hal-01307342
DOI : 10.1016/j.quaint.2015.05.021

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The South East Sayan area,Wof the Lake Baikal is subjected to a very complex tectonic setting where the extensional stress field of the Baikal Rift System meets the compressional stress field generated by the India­Asia collision further south. Using satellite images, aerial photographs, SRTM DEM, field mapping of geomorphological structures, and published neotectonics and geological data we show that most of the relief in the SE Sayan initiated during Late Pliocene­Pleistocene through compressive reactivation of inherited structures. By Late Quaternary, clockwise rotation of the compressive field generated strike­slip faulting and local, secondary extension still within a general compressional stress field. We demonstrate that the formation of the small-scale extensional basins within the East Sayan range is not linked to general the extension in the Baikal Rift System nor to a possible asthenospheric plume acting at the base of the crust but rather to the rotation of small rigid tectonic blocks driven by the compression.
ISSN: 0743-9547

insu-00605062
https://hal-insu.archives-ouvertes.fr/insu-00605062
DOI : 10.1016/j.jseaes.2010.10.011

Éditeur(s) : HAL CCSD
Résumé : International audience
High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. The question of their exhumation is nevertheless still unclear. The Aegean domain offers several HP-LT belts. Especially, the Attic-Cycladic Blueschist unit (ACBU) is an example of a HP-LT unit exhumed in a convergent and then in a divergent context. It actually appears in metamorphic core complexes (MCCs) formed in the back-arc of the subduction. The syn-convergence "message" is however difficult to read because of the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation remain unclear. We investigate theses questions with metamorphic petrology (Andros and Ios islands) and phengite population, single grain and in situ 40Ar-39Ar geochronology (Andros, Tinos, Syros and Ios islands). Based on these new constraints and a synthesis of published data, we are able to refine the geometry, the timing and the modes of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in the age and P-T conditions at the successive stages of syn-orogenic exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a basal thrust and a summital detachment. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. The change in boundary conditions is recorded by slowing of the exhumation and isobare heating. The conditions of post-orogenic exhumation differ from an island to another. The onset of post-orogenic exhumation is dated around 30 Ma in the northern Cyclades and 25 Ma in the southern Cyclades. It is related to top-to-the-North deformation in all the studied domain. The end of ductile deformation below the detachments is also diachronous (21 Ma in the North and 18 Ma in the South). Finally, we propose a model for the final steps of the exhumation related to the intrusion of granitic bodies around 14 Ma.
American Geophysical Union, Fall Meeting
San Francisco, United States

insu-00860510
https://hal-insu.archives-ouvertes.fr/insu-00860510
BIBCODE : 2010AGUFM.T23C2301L

Éditeur(s) : HAL CCSD
Résumé : This thesis aims to analyze the active tectonics and the seismic hazard for three main cities of NW Iran (Tehran, Tabriz and Zandjan) using morphotectonics and paleoseismology. Within the Tehran capital, we focused our analysis on the Mosha-North Tehran (M-NT) active fault system. Our investigations show that this fault system is mainly dominated by left-lateral faulting. Along the eastern part of the M-NT fault system, we found evidences of at least seven strong (M>7) paleoearthquakes during the past 10 ka (recurrence interval : 1100-1400 yrs). Our study along the central portion of the fault system (in Abali region) suggests that it corresponds probably to the source of the 1830 AD historical earthquake (M=7.1, Io= IX). Within Tabriz region, we studied the SE segment of the North Tabriz fault. We found evidences of at least three strong events, which occurred during the past 33.5 ka. The North Tabriz dextral fault corresponds to the central portion of a fault system (TFS), and contains two fault segments (NW and SE). Our paleoseismological analysis shows a variation of the slip rate, which decreases from NW to SE along the strike-slip fault. The western (Mishu) and eastern (Bozghush) terminations of the fault system correspond to oblique-compression zones. TFS belongs to the eastern portion of a regional fault system (GSKT), linking the active extension within the central part of the collision and the active compression to the East. Finally, we focus on the Zandjan area, where no important historical seismicitiy is recorded. There, based on morphotectonics analysis we discovered a large active fault network, whose southeastern part affects the Zandjan city. To conclude this work, we replace our observations within the general geodynamic framework of the Arabia- Eurasia collision. One of the striking pictures is the occurrence of opposite kinematics along the M-NT (and other range parallel faults within the south Central Alborz) and the North Tabriz fault systems that have the same trend. This shows the rapid variation of the regional stress field in the Northern Iran.
L'objectif de ce mémoire de thèse est l'étude de la tectonique récente et l'évaluation de l'aléa sismique pour trois villes importante, Téhéran, Tabriz et Zandjan, situées dans le nord-ouest de l'Iran. Dans la capitale de l'Iran, Téhéran, nous nous sommes concentrés sur le système de faille active de Mosha-Nord Téhéran. Nos travaux démontrent que ce système est essentiellement décrochant sénestre. Nos analyses paléosismologiques sur la portion est de ce système (dans la vallée de Tar) montrent au minimum les évidences de sept grands événements sismiques (M>7) pendant les derniers 10000 ans (l'intervalle de récurrence est de 1100 à 1400 ans). Les études que nous avons mené dans la partie centrale de ce système (région d'Abali) révèlent qu'il pourrait être la source du dernier événement sismique ayant affecté la ville de Téhéran en 1830 AD. Dans la région de Tabriz, nous nous sommes intéressés au segment SE de la faille décrochante dextre de Nord Tabriz où nous avons trouvé les évidences de trois grands séismes pendant les derniers 33500 ans. Nos études montrent que la faille Nord Tabriz qui est la portion centrale d'un système de faille (TFS) est constituée par deux segments NW et SE dextres. Notre étude paléosismologique suggère une variation de la vitesse qui diminue du NW vers SE le long de ces segments. Les extrémités ouest (Mishu) et est (Bozghush) de ce système correspondent à des zones compressives qui absorbent les déplacements horizontaux sur les segments NW et SE. D'un point de vue général la TFS est une partie d'un système de failles régionales (GSKT) qui relie une zone d'extension active dans la partie centrale de la collision Arabie-Eurasie et une zone de compression active à l'Est. Enfin, à Zandjan qui est une ville située dans une région de lacune sismique, nous avons découvert un important réseau de failles actives. Le tracé sud-est de ce réseau de failles passe par la ville de Zandjan. En conclusion, les localisations et les cinématiques des systèmes de faille étudiés sont discutées dans le cadre géodynamique général de la collision Arabie-Eurasie. On remarquera que la faille majeure de Nord Tabriz qui correspond essentiellement à un décrochement dextre a la même direction NW-SE que les décrochements sénestres présents dans la chaîne de l'Alborz (les failles de : Mosha, Talaghan et Manjil). Cette observation nécessite une variation de la direction de compression entre ces deux régions.
https://tel.archives-ouvertes.fr/tel-00539739

tel-00539739
https://tel.archives-ouvertes.fr/tel-00539739
https://tel.archives-ouvertes.fr/tel-00539739/document
https://tel.archives-ouvertes.fr/tel-00539739/file/thesesoleymani.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A network of continuous GPS stations has been installed in NW Iran since 2005 to complement the survey GPS network already existing in the region. We present the 1999-2009 GPS-derived velocity field for this region based on the continuous and survey-mode observations. The results confirm a right lateral slip of 7 +/- 1 mm/yr for the North Tabriz fault, in agreement with previous studies. This rate is consistent with earthquakes of magnitude 7-7.3 and recurrence times of 250-300 yr. The higher spatial coverage of the new network shows that deformation is localized in the vicinity of the Chalderan, south Gailatu-Siah Cheshmeh-Khoy fault and the North Tabriz fault. However the eastern end of the North Tabriz fault appears to cross Mount Bozgush rather than following its southern foothills. This new velocity field does not indicate the 8 mm/yr of NNE-SSW extension suggested earlier for the region, but rather shows lower extension of 1-2 +/- 1 mm/yr across the eastern segment of the North Tabriz fault and the Talesh. To the west, the Chalderan and the western North Tabriz fault segment act like pure strike slip faults without significant extension or compression. The denser network in the Rudbar earthquake region (Ms 7.3, 1992) shows no significant motion across the fault, suggesting that the recurrence time of earthquakes like the Rudbar event must be very long. The lack of substantial compressive strain and the sharp azimuth change of the velocity vectors in the transition zone from Arabia to Lesser Caucasus motion imply that processes other than "extrusion", possibly related to old subduction or delamination, contribute to active deformation.
ISSN: 0012-821X

hal-00617666
https://hal.archives-ouvertes.fr/hal-00617666
DOI : 10.1016/j.epsl.2011.04.029

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The El Oro metamorphic province of SW Ecuador is a composite massif made of juxtaposed terranes of both continental and oceanic affinity that has been located in a fore-arc position since Late Paleozoic times. Various geochemical, geochronological, and metamorphic studies have been undertaken on the El Oro metamorphic province, providing an understanding of the origin and age of the distinct units. However, the internal structures and geodynamic evolution of this area remain poorly understood. Our structural analysis and thermal modeling in the El Oro metamorphic province show that this fore-arc zone underwent four main geological events. (1) During Triassic times (230–225 Ma), the emplacement of the Piedras gabbroic unit at crustal-root level (~9 kbar) triggered partial melting of the metasedimentary sequence under an E-W extensional regime at pressure-temperature conditions ranging from 4.5 to 8.5 kbar and from 650 to 900°C for the migmatitic unit. (2) At 226 Ma, the tectonic underplating of the Arenillas-Panupalí oceanic unit (9 kbar and 300°C) thermally sealed the fore-arc region. (3) Around the Jurassic-Cretaceous boundary, the shift from trench-normal to trench-parallel subduction triggered the exhumation and underplating of the high-pressure, oceanic Raspas Ophiolitic Complex (18 kbar and 600°C) beneath the El Oro Group (130–120 Ma). This was followed by the opening of a NE-SW pull-apart basin, which tilted the massif along an E-W subhorizontal axis (110 Ma). (4) In Late Cretaceous times, an N-S compressional event generated heterogeneous deformation due to the presence of the Cretaceous Celica volcanic arc, which acted as a buttress and predominantly affected the central and eastern part of the massif.
ISSN: 0278-7407

hal-01115714
https://hal.archives-ouvertes.fr/hal-01115714
DOI : 10.1002/2014TC003618

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
In this paper we present and discuss new investigations performed on both the magmatic basement and the sedimentary formations of La Désirade. We report structural and sedimentary evidences for several episodes of deformation and displacement occurring prior to the present day tectonics. The main faults, respectively N130 ± 10°, N040 ± 10° and N090 ± 10°, previously considered as marker of the current tectonic regime corresponds to reactivated tectonic structures developed first during late Cretaceous compression and second during Pliocene to early Pleistocene extension. We demonstrate also the importance of late Pliocene-early Pleistocene and middle-late Pleistocene vertical movements in this part of the Lesser Antilles fore-arc as well as the role of compressive tectonics in the over thickened character of the arc basement in the Guadeloupe archipelago
EISSN: 1777-5817

hal-00830329
https://hal.archives-ouvertes.fr/hal-00830329
DOI : 10.2113/gssgfbull.184.1-2.21

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Recent field work and review of radiometric data obtained from Neogene lavas and plutonic rocks exposed in the Eastern Central Patagonian Cordillera (46–48ºS), which overlie subducted segments of the South Chile Ridge, suggest important Late Miocene to Pleistocene morphological changes in relation to base level variations and/or tectonic events. We present new field observations from a region south of Lago General Carrera-Buenos Aires, between the main Cordillera and the Meseta del Lago Buenos Aires, demonstrating that normal faulting controlled valley incisions and occurred during lava emplacement at 5–4 Ma and after 3 Ma. We also show that the 12 Ma basaltic flows of the Meseta del Lago Buenos Aires (~2000 m a.s.l.) have been subjected to deep incision, with younger lavas dated at 1.2 Ma partially filling the valleys. These incisions are thought to reflect progressive eastward tilting of the entire meseta. Our new observations, together with additional features from Central Patagonia, strongly suggest that tectonic events led to a regional widespread morphological change after 5 Ma. The coincidence in time and space between the subduction of segments of the South Chile Ridge at 6 and 3 Ma causing opening of a slab window, and strong base level variations in the studied area, suggests a cause-and-effect relationship. In Central Patagonia, compressional tectonics ended well before extensional events reported here. Causes of uplift and further extension are probably completely disconnected. The uplift is purely tectonic in origin and occurred prior to the subduction of the South Chile Ridge. Extension should be a consequence of this subduction.
ISSN: 0954-4879

insu-00272075
https://hal-insu.archives-ouvertes.fr/insu-00272075
DOI : 10.1111/j.1365-3121.2007.00766.x

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Physical modeling of oblique subduction is performed to study the mechanism of strain partitioning. The model is two-layer and includes the elasto-plastic lithosphere (the overriding and subducting plates) and the low-viscosity liquid asthenosphere. The subduction is driven by a push force from a piston and a pull force when the density contrast Ap between the subducting plate and the asthenosphere is positive. We vary both Ap and the interplate friction (frictional stresses). Slip partitioning is obtained only in the models with high interplate friction and only when the overriding plate contains a weak zone. This zone in the models corresponds either to locally thinned litho-sphere or to cut (fault). The horizontal, trench-normal component of the interplate friction force [Ffh[ can be comparable with the absolute value of the horizontal component of the nonhydrostatic interplate pressure force [Fph [ in the subduction zone. Ffh is always negative (compression), while Fph can be either negative (compressional subduction regime) or positive (extensional regime). High friction, which promotes partitioning, can completely cancel the extensional (suction) force Fph. Back arc tension and strike-slip faulting appear thus as conflicting processes, although they can coexist in the same subduction zone, depending on the relative values of relevant forces. It appears that high friction can exist only in compressional subduction zones where partitioning should develop more easily. This conclusion is supported by the comparison of two oblique subduction zones, having similar geometry: the compressional southern Kurile zone (strong partitioning) and extensional southern Ryukyu zone (no lithospheric-scale partitioning). Other factors controlling the strain partitioning are the length of the oblique subductlon zone, the boundary conditions at the transverse limits of the forearc sliver, and of course, the obliquity of subduction.
ISSN: 2169-9275

hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396/document
https://hal.archives-ouvertes.fr/hal-01261396/file/chemendaJGR2000.pdf
DOI : 10.1029/1999JB900332

Éditeur(s) : HAL CCSD
Résumé : International audience
The Transbaikal region extends over several hundreds of kilometres east of the Baikal Rift System. It is characterized by a number of sub-parallel Mesozoic grabens or half grabens generally filled with late Jurassic to Early Cretaceous clastic sediments interbedded with coal layers (1). Similar basins occur on an even larger area spanning from the Transbaikal region down to Korea implying a large-scale extensional process affecting most of the Amuria plate during the Mesozoic. In the Transbaikal region, the normal faults controlling the edges of the Mesozoic basins are generally superimposed to Palaeozoic ductile shear zones implying a strong localisation of the extensional deformation on inherited structures. Recent studies, associated to our own fieldwork demonstrated that some of the faults were again activated (2), still as extensional faults, during the Tertiary or Quaternary, and that some of them are presently active. The closure of the Mongol-Okhotsk ocean separating the Siberian plate from the Amurian block during the Mesozoic corresponds to a major event in the growth process of the East Asian continent. The oceanic suture zone is situated on the southern edge of the Transbaikal region and its roughly SW-NE direction is parallel to the basins (3). The timing of the closure of the Mongol-Okhotsk ocean is still highly debated: while sedimentological and tectonic data suggest that the oceanic closure and the following collision occurred in early Middle Jurassic (4), paleomagnetic studies advocate for a Early Cretaceous collision (5). Furthermore, several other questions remain on the localization, the size and the fate of the relief that most probably formed during the collision between the Amuria block and the Siberian craton. In order to answer those questions we used low temperature thermochronology data associated to tectonic, sedimentology and palinology to investigate the evolution of the Transbaikal grabens from Mesozoic to Present. Tectonic and thermochronology data provide evidences of exhumation and erosion along the eastern edge of the Siberian craton during the Middle Jurassic as well as a potential continuum of deformation between the Mesozoic extension and the initiation of the Baikal Rift System (6). Sedimentology and palinology reveals that the sediments deposited in the Transbaikal basin did not registered large-scale compressive deformation during or after their Late Jurassic - Early Cretaceous deposition and that they do not correspond to the dismantling of a strong compressive relief.
Geophysical Research Abstracts
Vienne, Austria

insu-00810487
https://hal-insu.archives-ouvertes.fr/insu-00810487

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf