Éditeur(s) : Leslie's Weekly Leslie's Weekly ( New York )
Résumé : Page 173 from Leslie's Weekly, Nov,. Article entitled "The Kingston earthquake at short range", by Francis E. Clark, Founder of the United Society of Christian Endeavor continues on verso.
Six illustrations: Plum Point Lighthouse, which was damaged by the earthquake and its ligth extinguished, causing the stranding of the steamship "Prinz Waldemar". -- Refugees each receiving the meagre food supply of two potatoes, a piece of bread, some brown sugar, and molasses. -- The American Consulate a mass of ruins - Vice-Counsul William H. Orrett standing in front of his demolished office. -- Hundreds of refugees in camp a the temporary market near the Parade ground. -- A crowd of homeless and hungry people waiting for the opening of the gate of the race-course relief station. -- Curious incident of the quake - Queen Victoria's statue, once facing the sea, turned completely around. -- Steamship "Prinz Waldemar," of the Hamburg-American Line, wrecked on the Jamaica coast because the Plum Point Light went out. -- Entrance to Up Park Camp, headquarters of the First West Indian Regiment, showing wreckage of gateways and buildings.
Kingston (Jamaica)

Droits : All rights reserved by the source institution.
2005-348-1

Éditeur(s) : Reprinted by NIMA ( Washington, D.C. )
Résumé : (Language) In English and Spanish.
Relief shown by contours and spot heights.
Includes indexes of selected buildings, location map, and boundaries map.
"Compiled in 1984 ..."
"NIMA ref. no. E952XTEGUCIGA."
(Statement of Responsibility) prepared and published under the direction of the Defense Mapping Agency Hydrographic-Topographic Center, Washington, D.C.
Honduras -- Tegucigalpa
Tegucigalpa (Honduras)

Droits : This item is a work of the U.S. federal government and not protected by copyright pursuant to 17 U.S.C. §105.
49951269
002802780
http://ufdc.ufl.edu/UF00098777/00001

Éditeur(s) : United States Defense Mapping Agency, Hydrographic / Topographic Center ( Washington, D. C. )
Résumé : "NIMA REF. NO. E952XLALIMA."
Relief shown by contours and spot heights. Contour interval 20 meters, supplementary contours 10 meters.
Indexed for selected buildings.
"Reprinted by NIMA 08-00."
Includes street index, location map, boundaries map, glossary, and notes.
(Statement of Responsibility) prepared and published by the Defense Mapping Agency Hydrographic/Topographic Center, Washington, D.C.
Honduras -- La Lima
La Lima (Honduras)

Droits : This item is a work of the U.S. federal government and not protected by copyright pursuant to 17 U.S.C. §105.
49863424
002802771
http://ufdc.ufl.edu/UF00098774/00001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Sedimentary rocks and detrital minerals sample large areas of the continental crust, and they are increasingly seen as a reliable archive for its global evolution. This study presents two approaches to model the growth of the continental crust through the sedimentary archive. The first builds on the variations in U-Pb, Hf and O isotopes in global databases of detrital zircons. We show that uncertainty in the Hf isotope composition of the mantle reservoir from which new crust separated, in the 176Lu/177Hf ratio of that new crust, and in the contribution in the databases of zircons that experienced ancient Pb loss(es), adds some uncertainty to the individual Hf model ages, but not to the overall shape of the calculated continental growth curves. The second approach is based on the variation of Nd isotopes in 645 worldwide fine-grained continental sedimentary rocks with different deposition ages, which requires a correction of the bias induced by preferential erosion of younger rocks through an erosion parameter referred to as K. This dimensionless parameter relates the proportions of younger to older source rocks in the sediment, to the proportions of younger to older source rocks present in the crust from which the sediment was derived. We suggest that a Hadean/Archaean value of K = 1 (i.e., no preferential erosion), and that post-Archaean values of K = 4–6, may be reasonable for the global Earth system. Models built on the detrital zircon and the fine-grained sediment records independently suggest that at least 65% of the present volume of continental crust was established by 3 Ga. The continental crust has been generated continuously, but with a marked decrease in the growth rate at ~ 3 Ga. The period from > 4 Ga to ~ 3 Ga is characterised by relatively high net rates of continental growth (2.9–3.4 km3 yr− 1 on average), which are similar to the rates at which new crust is generated (and destroyed) at the present time. Net growth rates are much lower since 3 Ga (0.6–0.9 km3 yr− 1 on average), which can be attributed to higher rates of destruction of continental crust. The change in slope in the continental growth curve at ~ 3 Ga is taken to indicate a global change in the way bulk crust was generated and preserved, and this change has been linked to the onset of subduction-driven plate tectonics. At least 100% of the present volume of the continental crust has been destroyed and recycled back into the mantle since ~ 3 Ga, and this time marks a transition in the average composition of new continental crust. Continental crust generated before 3 Ga was on average mafic, dense, relatively thin (< 20 km) and therefore different from the calc-alkaline andesitic crust that dominates the continental record today. Continental crust that formed after 3 Ga gradually became more intermediate in composition, buoyant and thicker. The increase in crustal thickness is accompanied by increasing rates of crustal reworking and increasing input of sediment to the ocean. These changes may have been accommodated by a change in lithospheric strength at around 3 Ga, as it became strong enough to support high-relief crust. This time period therefore indicates when significant volumes of continental crust started to become emergent and were available for erosion and weathering, thus impacting on the composition of the atmosphere and the oceans.
ISSN: 0037-0738

hal-01622696
https://hal.archives-ouvertes.fr/hal-01622696
DOI : 10.1016/j.sedgeo.2017.06.001

Éditeur(s) : United States Defense Mapping Agency, Hydrographic / Topographic Center ( Washington, D. C. )
Résumé : Relief shown by contours and spot heights.
Standard map series designation: Series E952.
Alternate title: La Lima.
Indexed for selected buildings.
"Printed by ... DMAHTC 8-91."
Includes street index, location map, boundaries map, and notes.
(Statement of Responsibility) prepared and published by the Defense Mapping Agency Hydrographic/Topographic Center, Washington, D.C.
Honduras -- La Lima
La Lima (Honduras)

Droits : This item is a work of the U.S. federal government and not protected by copyright pursuant to 17 U.S.C. §105.
26998455
001819330
http://ufdc.ufl.edu/UF00098773/00001

Éditeur(s) : Elsevier
Résumé : Analysis of new high-resolution seismic-reflection profiles, chirp profiles and previously published sidescan data, together with piston cores on the Danube Fan provide new insight into the recent sedimentation processes in the deep northwestern Black Sea.The latest channel-levee system on the Danube Fan developed probably during the Neoeuxinian lowstand (oxygene isotope stage 2) in a semi-freshwater basin with a water level about 100 m lower than today. Sediment supplied by the Danube was transported to the deep basin through the Viteaz Canyon, which was directly connected to the leveed channel of this system on the middle slope. Channel avulsion was common in the middle fan, as indicated by four main phases of bifurcation. Each phase developed after the same pattern: breaching of the lower and narrower left levee by turbidity currents, building of a unit of High Amplitude Reflection Packets (HARP) by the unchannelized flow while the former channel was abandoned, followed by initiation of a new meandering leveed channel. The northward migration through successive bifurcations is influenced by the asymmetry between levees, hence by the Coriolis effect. In the lower fan where the levees became too low to maintain a stable pathway for the turbiditic flows, channel migration occurred. Locations of HARPs and channels after bifurcation are controlled by the pre-existing bathymetry. Sedimentary deposits are confined between the high levees of unit 0 (the initial phase of the youngest channel-levee system) to the south, and the steep relief of the Dniepr Fan to the north.The HARPs of the most recent phase of avulsion are the most severely constrained by local topography and form a very narrow elongate structure that is at most half as thick as the previous HARPs. Their distal part is not covered by channel-levee systems and is visible both on sidescan mosaics and on chirp profiles and was sampled in core BLKS 98-20.Sea level controlled fan activity but the evolution of the last channel-levee system with several bifurcations during a single sea level lowstand suggests that the primary control of channel avulsion and sand delivery is probably autocyclic.The presence of important HARP sand bodies in the mud-rich Danube Fan is presumed by analogy with a similar seismic facies on the Amazon Fan and indicated by the sands cored in BLKS98-20. However, only drilling of the HARP units could verify this interpretation.
Marine Geology (0025-3227) (Elsevier), 2001-09 , Vol. 179 , N. 1-2 , P. 25-37

Droits : 2001 Elsevier Science B.V. All rights reserved
http://archimer.ifremer.fr/doc/2001/publication-474.pdf
DOI:10.1016/S0025-3227(01)00197-9
http://archimer.ifremer.fr/doc/00000/474/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The South East Sayan area,Wof the Lake Baikal is subjected to a very complex tectonic setting where the extensional stress field of the Baikal Rift System meets the compressional stress field generated by the India­Asia collision further south. Using satellite images, aerial photographs, SRTM DEM, field mapping of geomorphological structures, and published neotectonics and geological data we show that most of the relief in the SE Sayan initiated during Late Pliocene­Pleistocene through compressive reactivation of inherited structures. By Late Quaternary, clockwise rotation of the compressive field generated strike­slip faulting and local, secondary extension still within a general compressional stress field. We demonstrate that the formation of the small-scale extensional basins within the East Sayan range is not linked to general the extension in the Baikal Rift System nor to a possible asthenospheric plume acting at the base of the crust but rather to the rotation of small rigid tectonic blocks driven by the compression.
ISSN: 0743-9547

insu-00605062
https://hal-insu.archives-ouvertes.fr/insu-00605062
DOI : 10.1016/j.jseaes.2010.10.011

Éditeur(s) : Université de Bucarest - Université de Bretagne occidentale
Résumé : This study is focusing on the architecture and recent sedimentary evolution of the Danube channel, the youngest channel-levee system in the Danube deep-sea fan. The study was conducted as part of the BlaSON French-Romanian Project, and combined high-resolution seismic-reflection profiles and chirp profiles with multibeam bathymetry and piston cores. This data set was acquired in 1998 during a joint survey IFREMER-GeoEcoMar of the north-western Black Sea. Previous seismic and acoustic data were also used. The Danube deep-sea fan is a large passive-margin mud-rich fan. Like the other systems of this type (Amazon fan, Mississippi fan or Indus fan) the Danube fan consists of stacked channel-levee systems intercalated with mass-transport deposits. Seismic and sedimentary facies in the Danube fan are similar to those identified in most of the mud-rich systems. Nevertheless, the Danube fan is distinguished by a specific feature: its development in a freshwater environment. This is due to the peculiar water-level history of the Black Sea controlled by the link to the Mediterranean through the Strait of Bosphorus and the Sea of Marmara. This connexion was successively interrupted (during sea level lowstands) and re-established (when the sea level was rising above the Bosphorus). Temporary absence of marine water influx during lowstands together with large freshwater inputs from the Danube and other major rivers changed the Black Sea into a freshwater lake during times of fan activity. This peculiarity possibly favourised the development of hyperpycnal flow at the Danube mouth and the initiation of turbidity currents in the deep-sea fan. The Danube channel is directly connected to the large shelf-indenting Danube canyon (also known as Viteaz canyon). The Danube canyon is deeply incised into the shelf margin for 26 km landward of the shelfbreak. During lowstands this canyon acted as the most important path for sediment supply to the deep sea in this part of the continental margin. It consists of a main trough with steep flanks, and a meandering thalweg cut into the flat canyon floor, attesting for the development of the canyon by erosion in the entrenched axial thalweg. Sections with specific morphology, orientation and gradient identified along the canyon, are interpreted as phases of landward expansion of the canyon. Internal structure of the canyon shows several erosional surfaces, which indicate that the present morphology of the canyon is the result of its polyphasic evolution. Instability in the zone of the canyon is related to the important sediment supply at the Danube mouth, to the presence of the gas in the surficial sediment, and possibly under a structural control. The upper part of the Danube channel (between the Danube canyon and ~1400 m depth) consists in a single leveed-channel that has undergone significant overbank deposition, as attested by the well-developed levees. The levees are strongly asymmetrical, being higher and wider on the right-hand side looking downstream. This type of asymmetry is rather common in deep-sea fans, and is generally attributed to the Coriolis effect (Menard, 1955). The channel is slightly sinuous, partially filled and incised by an entrenched thalweg, connected to the axial thalweg of the Danube canyon. Detailed seismic investigation inside the channel trough documented several depositional phases within the channel fill, separated by erosional surfaces. These surfaces are associated with distinct terraces identified on the multibeam bathymetry, that can be followed downward along the main trough axis. The valley fill deposits (where not removed by the subsequent erosional event) show an axial HAR (High Amplitude Reflections) seismic facies with lateral lower amplitude continuous reflections consisting in a levee facies, as proved by sampling. This indicates that filling up was associated with flow within the channel, and not with interruption of fan activity. On the middle slope below 1400 m, this single channel bifurcates through repeated avulsions. As a result, several highly meandering channels developed. The onlap relationships between these channels indicate that only one channel was active at a time. Each phase of avulsion resulted in a depositional unit consisting in a basal unchannelized lobe defined as High Amplitude Reflection Packets (HARP, Flood et al., 1991) that underlies a channel-levee system. The deposition of HARPs was associated with the readjustment of the longitudinal profile of the channel after the breaching of a levee, which resulted in remobilization of upslope channel deposits and eroded levees. When this adjustment was complete, erosion ceased and levees began to develop above the HARPs (Pirmez et al., 1997). All the identified phases of avulsion followed the same pattern: (1) breaching of the lower and narrower left levee; (2) building of a unit of High Amplitude Reflector Packets (HARP) basinward of the bifurcation point by the unchannelized flow, while the former channel was abandoned; and (3) initiation of a new meandering leveed channel. The northward migration of the resulting units through repeated bifurcations is influenced by the asymmetry between levees (hence by the Coriolis effect), and confined between the high levees of the initial phase of the Danube channel (to the south) and the steep relief of the Dniepr fan (to the north). Structure of the fan valley fill indicate that the erosional surfaces inside the upper channel could be formed in response of successive avulsions, by the adjustment of the longitudinal profile of the channel following the breaching of a levee wall. Sediments removed by erosion formed the HARP lobes basinward of the avulsion point. When this adjustment was complete, a channel-levee system developed downward of the bifurcation, overlying the HARPs, but also upward of this point, as a confined channel-levee system inside the erosional trough of the fan valley. Fluvial incisions identified on the continental shelf, together with the coastline location during the last active period of the Danube channel, indicated that the paleo-Danube was directed towards the head of the Danube canyon. Paleo-Danube mouth was fairly close (ca. 10 km) to the Danube canyon, supplying sediment to the Danube channel. Furthermore, hyperpycnal flow probably prevailed in the freshwater environment that characterized the Black Sea during times of fan activity. These conditions would have enabled the development of a quasi-continuous river-canyon-deep-sea fan system, ensuring the effective transfer of the sediment between the coastal zone and the deep sea.
Ce travail est consacré à l'étude de l'architecture et de l'évolution sédimentaire récente de l'éventail profond du Danube, en particulier de son dernier système chenal-levée: le chenal du Danube. L'étude a été réalisée dans le cadre du projet de coopération franco-roumaine BlaSON, à partir des données sismiques, bathymétriques-acoustiques et sédimentologiques acquises en 1998 lors d'une campagne en mer Noire réalisée par IFREMER et GeoEcoMar. Des données sismiques et acoustiques antérieures ont été également utilisées. L'éventail profond du Danube s'enserre dans la catégorie des grands éventails vaseux. Comme les autres systèmes de ce genre (tel que les éventails de l'Amazone, du Mississippi ou de l'Indus) il est constitué d'une succession de systèmes chenaux-levées intercalés avec des dépôts de transport en masse. Le fonctionnement de l'éventail était conditionné par la baisse du niveau marin lors des périodes glaciaires. Ses faciès sismiques et sédimentaires s'apparentent aux faciès qui caractérisent la plupart des éventails de ce type. L'éventail du Danube constitue néanmoins un cas particulier parmi les autres systèmes étudiés, du fait de son fonctionnement dans un bassin lacustre. Ceci est dû à la situation spécifique de la mer Noire dont la connexion avec la Méditerranée, par le détroit de Bosphore et la mer de Marmara, a été successivement interrompue (au cours de périodes de bas niveau) et reprise (quand le niveau marin remontait en dépassant le seuil du Bosphore). L'absence de l'apport d'eau salée pendant les périodes glaciaires, associée avec l'augmentation de l'apport fluvial, ont déterminé l'installation d'un milieu d'eau douce dans la mer Noire à chaque fois que la baisse du niveau permettait la reprise du fonctionnement de l'éventail profond. Cette situation particulière aurait favorisé la formation des courants hyperpycnaux à l'embouchure d'un fleuve du débit du Danube qui déversait ses eaux turbides dans un bassin lacustre, et aurait donc influencé l'apparition de courants de turbidité dans l'éventail profond. Le chenal du Danube s'est développé sur la pente continentale en prolongation du canyon du Danube (ou Viteaz) auquel il est directement connecté. Le canyon est incisé de manière significative (26 km) dans la plate-forme continentale. Au cours de bas-niveaux marins il constituait la principale voie de transfert des sédiments terrigènes vers le bassin profond dans cette partie de la marge. Le canyon est constitué par une entaille avec des flancs abrupts et un talweg axial incisé, qui montre l'importance du processus d'érosion du fond pour le développement du canyon. Les segments qui ont été identifiés le long du canyon, avec des morphologies, des orientations et des pentes spécifiques, sont interprétés comme des phases d'avancement du canyon vers la côte. Plusieurs incisions sont visibles dans la structure interne du canyon et témoignent que la morphologie actuelle du canyon est le résultat de son évolution polyphasée. L'instabilité de la zone du canyon est en relation avec les apports sédimentaires importants à l'embouchure du Danube, avec la présence du gaz dans les sédiments superficiels, et possiblement sous un contrôle structural. Sur la pente supérieure (entre le canyon du Danube et environ 1400 m de profondeur) le chenal du Danube présente des levées bien développées et fortement asymétriques, avec la levée droite plus haute et plus large que la levée gauche. Ce type d'asymétrie, fréquemment décrit dans les éventails profonds est généralement attribué à l'effet Coriolis (Menard, 1955). Le chenal est légèrement sinueux, partiellement comblé et incisé par un talweg axial qui représente la continuation sur la pente du talweg incisé dans le canyon du Danube. L'analyse sismique détaillée du remplissage de la vallée montre plusieurs phases de dépôt, séparées par des discontinuités érosives. Ces surfaces d'érosion correspondent à des terrasses emboîtées, relativement parallèles le long de la vallée, visibles dans la bathymétrie. Les dépôts qui constituent le remplissage du chenal présentent un faciès sismique de type HAR (High Amplitude Reflections) dans l'axe du chenal, partiellement (ou parfois totalement) enlevé par les phases d'érosion subséquentes, qui continue latéralement avec des réflexions litées correspondant à un faciès sédimentaire de levée. Le remplissage de la vallée a été donc associé avec des écoulements dans le chenal, et non pas avec l'interruption de son fonctionnement. Sur la pente inférieure, le chenal unique bifurque plusieurs fois par avulsion et forme de nouveaux systèmes chenaux-levées méandriformes. Ces systèmes se succèdent verticalement en onlap, ce qui montre qu'un seul chenal a été actif à la fois. Chaque phase d'avulsion a eu comme résultat la mise en place d'une unité constituée par un lobe défini comme "High Amplitude Reflection Packets" (HARP, Flood et al., 1991) à la base, et un système chenal-levée au sommet. Le dépôt d'un lobe HARP est associé avec de l'érosion dans le chenal en amont du point d'avulsion pour l'ajustement de son profil après la rupture de la levée. Quand le chenal a retrouvé son profil d'équilibre, l'érosion a cessé et des levées ont commencé à se développer au-dessus des HARPs (Pirmez et al., 1997). Toutes les phases d'avulsion se sont développées d'après le même modèle: (1) la rupture de la levée gauche, plus étroite; (2) le dépôt d'un lobe HARP par les écoulements non-chenalisés en aval du point d'avulsion, et l'abandon de l'ancien chenal; (3) l'initiation d'un nouveau système chenal-levée. La migration systématique du chenal vers le nord est influencée par l'assymétrie des levées (donc par la force de Coriolis), et confinée entre les grandes levées de la phase initiale du chenal du Danube, au sud, et le relief abrupt de l'éventail du Dniepr au nord. La structure sédimentaire du chenal du Danube indique que les surfaces érosives à l'intérieur du remplissage du chenal se seraient formées en réponse aux avulsions, du fait de l'ajustement du profil du chenal après la rupture d'une levée. Les sédiments du chenal érodés au cours de ce processus ont formé les lobes HARP. Quand le chenal a retrouvé son profil d'équilibre, un système chenal-levée s'est développé en aval du point d'avulsion au dessus du lobe HARP, mais aussi en amont de ce point, où il se trouve confiné dans la vallée érosive. Les incisions fluviatiles identifiés sur la plate-forme continentale et la position de la ligne de côte pendant la dernière période d'activité du chenal du Danube montrent que le paléo-Danube se dirigeait directement vers la tête du canyon du Danube. Son embouchure était située à proximité du canyon, qui alimentait le chenal du Danube. Cependant, les courants hyperpycnaux devaient prévaloir dans le milieu de salinité réduite qui caractérisait la mer Noire lors des périodes actives de l'éventail. Ces conditions auraient favorisé la mise en place d'un système quasi-continu fleuve-canyon-éventail profond, qui contrôlait le transfert des sédiments entre la côte et le bassin profond.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2002/these-1206.pdf
http://archimer.ifremer.fr/doc/00000/1206/