Éditeur(s) : Amer Geophysical Union
Résumé : The Algerian margin has originated from the opening of the Algerian basin about 25-30 Ma ago. The central margin provides evidence for large-scale normal faults of Oligo-Miocene age, whereas transcurrent tectonics characterizes the western margin. A set of NW-SE oriented dextral transform faults was active during basin opening and divided the 600 km long central margin into segments of similar to 120-150 km. The upper Miocene, Plio-Quaternary, and present-day tectonic setting is, however, compressional and supports the occurrence of a margin inversion, a process still poorly documented worldwide. We show that the central Algerian margin represents a rare example of inverted margin, where the process of subduction inception is particularly well expressed and helps understand how extensional and transtensive structures are involved in margin shortening. Using multibeam bathymetry and multichannel seismic reflection sections from the MAR-ADJA 2003 and 2005 cruises, we evidence Pliocene-Pleistocene shortening with contrasting styles along the margin between west (Khayr Al Din bank) and east (Boumerdes-Dellys margin) of Algiers. Pre-Miocene structures such as basement highs and transform faults appear to control changes of the deformation pattern along this part of the margin, resulting in different widths, geometries, and relative positions of folds and faults. Plio-Quaternary and active blind thrust faults do not reuse Oligo-Miocene normal and transform faults during inversion, but instead grow within the continental margin (as testified for instance by the 21 May 2003 M-w 6.8 Boumerdes-Zemmouri earthquake), at the foot of the continental slope and at the northern sides of basement highs interpreted as stretched continental blocks of the rifted margin. The inherited structures of the margin appear, therefore, to determine this deformation pattern and ultimately the earthquake and tsunami sizes offshore. The complex geometry of the fault system along the Algerian margin suggests a process of initiation of subduction in its central and eastern parts.
Tectonics (0278-7407) (Amer Geophysical Union), 2010-03 , Vol. 29 , N. TC2008 , P. 1-22

Droits : 2010 American Geophysical Union
http://archimer.ifremer.fr/doc/00008/11883/9286.pdf
http://archimer.ifremer.fr/doc/00008/11883/9287.pdf
DOI:10.1029/2009TC002547
http://archimer.ifremer.fr/doc/00008/11883/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In southeastern Taiwan a slice of forearc basement belonging to the Philippine Sea Plate upper-plate is suspected to subduct under the Luzon arc as a consequence of the transition from oceanic to incipient continental subduction. Effects on the morphology, deformation, geometry of structures and tectonic evolution of the orogenic wedge in the collision area are numerous. This study examines the impact of foreare lithosphere subduction on forearc basin and accretionary wedge deformation. A morpho-structural analysis of the geological features observed onland and offshore allows describing in detail the complex deformation suffered by the area. A combined approach by analogue modeling is applied to better understand the phenomenon. Comparison between nature and experimental results shows that subduction of a forearc basement slice induces intense shortening and concomitant deformation in the foreare domain. Such process involves deformation of the foreare basin previously developed in a setting of oceanic subduction. Sediments of the forearc basin are involved in the growth of a new thrust ridge backthrusted against the basement slope of the volcanic arc edifice. Sediments coming from the growing orogenic wedge are trapped in the trough developed between its backpart and the topographic high of the new rising ridge. A syn-collisional orogenic basin develops which structural evolution characterizes the progressive shortening of the forearc domain. Most of the deformation and tectonic events recorded offshore or onland in the complex area south of Taiwan can be explained using results of our specific modeling which well describe the tectonic processes associated with continental subduction under a volcanic are.
ISSN: 0040-1951

hal-00420080
https://hal.archives-ouvertes.fr/hal-00420080
DOI : 10.1016/j.tecto.2007.11.016

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : The properties of the subduction interplate domain are likely to affect not only the seismogenic potential of the subduction area but also the overall subduction process, as it influences its viability. Numerical simulations are performed to model the long-term equilibrium state of the subduction interplate when the diving lithosphere interacts with both the overriding plate and the surrounding convective mantle. The thermomechanical model combines a non-Newtonian viscous rheology and a pseudo-brittle rheology. Rock strength here depends on depth, temperature and stress, for both oceanic crust and mantle rocks. I study the evolution through time of, on one hand, the brittle-ductile transition (BDT) depth, zBDT, and, on the other hand, of the kinematic decoupling depth, zdec, simulated along the subduction interplate. The results show that both a high friction and a low ductile strength at the asthenospheric wedge tip shallow zBDT. The influence of the weak material activation energy is of second order but not negligible. zBDT becomes dependent on the ductile strength increase with depth (activation volume) if the BDT occurs at the interplate decoupling depth. Regarding the interplate decoupling depth, it is shallowed (1) significantly if mantle viscosity at asthenospheric wedge tip is low, (2) if the difference in mantle and interplate activation energy is weak, and (3) if the activation volume is increased. Very low friction coefficients and/or low asthenospheric viscosities promote zBDT = zdec. I then present how the subducting lithosphere age affects the brittle-ductile transition depth and the kinematic decoupling depth in this model. Simulations show that a rheological model in which the respective activation energies of mantle and interplate material are too close hinders the mechanical decoupling at the down-dip extent of the interplate, and eventually jams the subduction process during incipient subduction of a young (20-Myr-old) and soft lithosphere under a thick upper plate. Finally, both the BDT depth and the decoupling depth are a function of the subducting plate age, but are not influenced in the same fashion: cool and old subducting plates deepen the BDT but shallow the interplate decoupling depth. Even if BDT and kinematic decoupling are intrinsically related to different mechanisms of deformation, this work shows that they are able to interact closely. Comparison between modelling results and observations suggests a minimum friction coefficient of 0.045 for the interplate plane, even 0.069 in some cases, to model realistic BDT depths. The modelled zdec is a bit deeper than suggested by geophysical observations. Eventually, the better way to improve the adjustment to observations may rely on a moderate to strong asthenosphere viscosity reduction in the metasomatised mantle wedge.
ISSN: 1869-9510

hal-00795559
https://hal.archives-ouvertes.fr/hal-00795559
DOI : 10.5194/se-3-467-2012, 2012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We analyze in this study a new set of marine data including 3D local tomography, 1992-2008 relocated earthquakes and two recent multichannel seismic lines to characterize the deformation style in the collision area offshore east Taiwan. We have mapped in detail the Mohos of the converging plates as well as the subduction interface with a resolution never reached before. We show that the sharp continental subduction of the Eurasia plate, beneath the middle part of the Central Range, indents the Philippine Sea plate (PSP) as attested by intra-oceanic slicing and incipient subduction of the PSP beneath the east coast of Taiwan. The westernmost part of the PSP slab is probably experiencing a beginning of break-off as attested by NW-trending en-échelon shear zones beneath the southern slope of the southern Ryukyu arc (SRA). These en-échelon shear zones have a sinistral component favored by the "collision-free" subduction of the PSP north of 24°30′N. The down-faulting of the subduction interface forms ramps along which earthquakes clusterize. Three M7 subduction earthquakes occurred offshore Suao city along these ramps with a recurrence interval of about 40 years: 1920 Mw7.7, 1963 Mw7.2 and 2002 Mw7.1 events. The 1966 Mw6.0-7.5 earthquakes sequence likely outlines a WNW-ESE left-lateral intra-slab shear zone. The SRA upper plate accommodates the complex geometry and deformation of the subducting PSP through seismic deformation. Shallow high velocities fringing the Luzon volcanic arc (LVA) beneath the Longitudinal Valley and north of the southernmost Ryukyu forearc basins are interpreted as relics of the LVA forearc basement squeezed in the collision zone. Based on the accommodation of a large part of the convergence through shortening within the PSP and the subsequent segmentation of the shallow subduction interface, we consider that the nucleation of a Mw ≥ 8 earthquake along the southernmost Ryukyu megathrust is unlikely.
ISSN: 0040-1951

hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365/document
https://hal.archives-ouvertes.fr/hal-00853365/file/publallemandifremer.pdf
DOI : 10.1016/j.tecto.2013.03.020

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Structural, metamorphic, and geochronologic work shows that the Ampelos/Dilek nappe of the Cycladic blueschist unit in the eastern Aegean constitutes a wedge of high-pressure rocks extruded during early stages of orogeny. The extrusion wedge formed during the incipient collision of the Anatolian microcontinent with Eurasia when subduction and deep underthrusting ceased and the Ampelos/Dilek nappe was thrust southward over the greenschist-facies Menderes nappes along its lower tectonic contact, the Cycladic-Menderes thrust, effectively cutting out a ∼30- to 40-km-thick section of crust. The upper contact of the Ampelos/Dilek extrusion wedge is the top-to-the-NE Selçuk normal shear zone, along which the Ampelos/Dilek nappe was exhumed by ∼30–40 km. Detailed Rb-Sr and 40Ar/39Ar dating of mylonites demonstrates that both shear zones operated between 42 and 32 Ma. There is no evidence for episodic motion during the ∼10 Myr life span of the shear zones, suggesting that both shear zones operated in a steady, nonepisodic fashion. Our data provide supporting evidence that simultaneous thrust-type and normal sense shearing can accomplish the early exhumation of deep-seated rocks
ISSN: 0278-7407

hal-00405013
https://hal.archives-ouvertes.fr/hal-00405013
DOI : 10.1029/2005TC001872

Éditeur(s) : HAL CCSD Elsevier
Résumé : In order to address the question of the processes involved during shear zone nucleation, we present a petro-structural analysis of millimetre-scale shear zones within the Roffna rhyolite (Suretta nappe, Eastern central Alps). Field and microscopic evidences show that ductile deformation is localized along discrete fractures that represent the initial stage of shear zone nucleation. During incipient brittle deformation, a syn-kinematic metamorphic assemblage of white mica + biotite + epidote + quartz precipitated at ca. 8.5 ± 1 kbar and 480 ± 50 °C that represent the metamorphic peak conditions of the nappe stacking in the continental accretionary wedge during Tertiary Alpine subduction. The brittle to ductile transition is characterized by the formation of two types of small quartz grains. The Qtz-IIa type is produced by sub-grain rotation. The Qtz-IIb type has a distinct CPO such that the orientation of c-axis is perpendicular to the shear fracture and basal and rhombhoedric slip systems are activated. These Qtz-IIb grains can either be formed by recrystallization of Qtz-IIa or by precipitation from a fluid phase. The shear zone widening stage is characterized by a switch to diffusion creep and grain boundary sliding deformation mechanisms. During the progressive evolution from brittle nucleation to ductile widening of the shear zone, fluid–rock interactions play a critical role, through chemical mass-transfer, metasomatic reactions and switch in deformation mechanisms.
ISSN: 0191-8141

hal-01355954
https://hal.archives-ouvertes.fr/hal-01355954
DOI : 10.1016/j.jsg.2016.02.015

Éditeur(s) : HAL CCSD
Résumé : International audience
Metamorphic soles correspond to m to 500m thick tectonic slices welded beneath most of the large-scale ophiolites.They typically show a steep inverted metamorphic structure where the pressure and temperature conditions ofcrystallization increase upward (from 500100ºC at 0.50.2 GPa to 800100ºC at 1.00.2 GPa), with isogradssubparallel to the contact with the overlying ophiolitic peridotite. The proportion of mafic rocks in metamorphicsoles also increases from the bottom (meta-sediments rich) to the top (approaching the ophiolite peridotites). Thesesoles are interpreted as the result of heat transfer from the incipient mantle wedge toward the nascent slab (associatedwith large-scale fluid transfer and possible shear heating) during the first My of intra-oceanic subduction(as indicated by radiometric ages). Metamorphic soles provide therefore major constraints on early subductiondynamics (i.e. thermal structure, fluid migration and rheology along the nascent slab interface).We present a detailed structural and petrological study of the metamorphic sole from 4 major cross-sections alongthe Oman ophiolite. We show precise pressure–temperature estimates obtained by pseudosection modelling andEBSD measurements performed on both the garnet-bearing and garnet-free high-grade sole. Results allow quantificationof the micro-scale deformation and highlight differences in pressure–temperature–deformation conditionsbetween the 4 different locations, showing that the inverted metamorphic gradient through the sole is not continuousin all locations.Based on these new constraints, we suggest a new tectonic–petrological model for the formation of metamorphicsoles below ophiolites. This model involves the stacking of several homogeneous slivers of oceanic crust leadingto the present-day structure of the sole. In this view, these thrusts are the result of rheological contrasts between thesole and the peridotite as the plate interface progressively cools down. These slivers later underwent several stagesof retrogression (partly mediated by ascending fluids from the slab) from amphibolite- to prehnite/pumpellite-faciesconditions.
Geophysical Research Abstracts
Vienne, Austria

insu-01309369
https://hal-insu.archives-ouvertes.fr/insu-01309369

Éditeur(s) : HAL CCSD
Résumé : International audience
Metamorphic soles correspond to m to 500 m thick highly strained metamorphic rock units found beneath myloniticbanded peridotites at the base of large-scale ophiolites, as exemplified in Oman. Metamorphic soles aremainly composed of metabasalts deriving from the downgoing oceanic lithosphere and metamorphosed up togranulite-facies conditions by heat transfer from the mantle wedge. Pressure–temperature peak conditions areusually estimated at 1.00.2 GPa and 800100ºC. The absence of HP–LT metamorphism overprint implies thatmetamorphic soles have been formed and exhumed during subduction infancy. In this view, metamorphic soleswere strongly deformed during their accretion to the mantle wedge (corresponding, now, to the base of the ophiolite).Therefore, metamorphic soles and banded peridotites are direct witnesses of the dynamics of early subductionzones, in terms of thermal structure, fluid migration and rheology evolution across the nascent slab interface.Based on fieldwork and EBSD analyses, we present a detailed (micro–) structural study performed on samplescoming from the Sumeini window, the better-preserved cross-section of the metamorphic sole of Oman. Largedifferences are found in the deformation (CPO, grain size, aspect ratio) of clinopyroxene, amphibole and plagioclase,related to mineralogical changes linked with the distance to the peridotite contact (e.g., hardening due to theappearance of garnet and clinopyroxene).To model the incipient slab interface in laboratory, we carried out 5 hydrostatic annealing and simple-shear experimentson Griggs solid-medium apparatus. Deformation experiments were conducted at axial strain rates of 10-6s-1. Fine-grained amphibolite was synthetized by adding 1 wt.% water to a (Mid-Ocean Ridge) basalt powder asa proxy for the metamorphic sole (amphibole + plagioclase + clinopyroxene garnet assemblage). To synthetizegarnet, 2 experiments were carried out in hydrostatic conditions and with deformation at 800C with confiningpressure of 2 GPa. Another simple-shear experiment has been carried out at 800C and 1 GPa with fined-grainednatural garnet. With the aim of mimicking the early slab interface (between the metamorphic sole and bandedperidotites at the base of the ophiolite), 2 simple-shear deformation experiments with 2 layers have been carriedout at 800C and confining pressure of 1 GPa. The bottom layer was made of hydrated basalt powder and the toplayer was made of olivine.Fined-grained garnet-free amphibolite is significantly weaker than dunite but the appearance of harder mineralsin the amphibolite (garnet and clinopyroxene) has major implications on its rheological evolution. These resultsallow liking field observations of strain localization at the interface to the metamorphic sole formation
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01309394
https://hal-insu.archives-ouvertes.fr/insu-01309394