Éditeur(s) : Amer Geophysical Union
Résumé : The Algerian margin has originated from the opening of the Algerian basin about 25-30 Ma ago. The central margin provides evidence for large-scale normal faults of Oligo-Miocene age, whereas transcurrent tectonics characterizes the western margin. A set of NW-SE oriented dextral transform faults was active during basin opening and divided the 600 km long central margin into segments of similar to 120-150 km. The upper Miocene, Plio-Quaternary, and present-day tectonic setting is, however, compressional and supports the occurrence of a margin inversion, a process still poorly documented worldwide. We show that the central Algerian margin represents a rare example of inverted margin, where the process of subduction inception is particularly well expressed and helps understand how extensional and transtensive structures are involved in margin shortening. Using multibeam bathymetry and multichannel seismic reflection sections from the MAR-ADJA 2003 and 2005 cruises, we evidence Pliocene-Pleistocene shortening with contrasting styles along the margin between west (Khayr Al Din bank) and east (Boumerdes-Dellys margin) of Algiers. Pre-Miocene structures such as basement highs and transform faults appear to control changes of the deformation pattern along this part of the margin, resulting in different widths, geometries, and relative positions of folds and faults. Plio-Quaternary and active blind thrust faults do not reuse Oligo-Miocene normal and transform faults during inversion, but instead grow within the continental margin (as testified for instance by the 21 May 2003 M-w 6.8 Boumerdes-Zemmouri earthquake), at the foot of the continental slope and at the northern sides of basement highs interpreted as stretched continental blocks of the rifted margin. The inherited structures of the margin appear, therefore, to determine this deformation pattern and ultimately the earthquake and tsunami sizes offshore. The complex geometry of the fault system along the Algerian margin suggests a process of initiation of subduction in its central and eastern parts.
Tectonics (0278-7407) (Amer Geophysical Union), 2010-03 , Vol. 29 , N. TC2008 , P. 1-22

Droits : 2010 American Geophysical Union
http://archimer.ifremer.fr/doc/00008/11883/9286.pdf
http://archimer.ifremer.fr/doc/00008/11883/9287.pdf
DOI:10.1029/2009TC002547
http://archimer.ifremer.fr/doc/00008/11883/

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The lateral variation of the mechanical properties of continental lithosphere is an important factor controlling the localization of deformation and thus the deformation history and geometry of intraplate mountain belts. A series of three-layer lithospheric-scale analog models, with a strong domain (SD) embedded at various depths, are presented to investigate the development of topography and deformation patterns by having lateral heterogeneities within a weak continental lithosphere. The experiments, performed at a constant velocity and under normal gravity, indicate that the presence or absence of the SD controls whether deformation is localized or distributed at a lithospheric scale. Deformation and topography localize above the edges of the SD, while the SD region itself is characterized by minor amounts of surficial deformation and topography. The depth of the SD (within the ductile crust, ductile mantle lithosphere, or both) controls the pattern of deformation and thus the topography. The presence of a SD in the ductile crust or in the mantle results in limited surficial topographic effects but large variations in the Moho topography. Strong Moho deflection occurs when the SD is in the ductile crust, while the Moho remains almost flat when the SD is in the mantle. When the SD occupies the ductile lithosphere, the SD is tilted. These analog experiments provide insights into intraplate strain localization and could in particular explain the topography around the Tarim Basin, a lithospheric-scale heterogeneity north of the India-Asia collision zone.
ISSN: 0278-7407

hal-01172472
https://hal.archives-ouvertes.fr/hal-01172472
DOI : 10.1002/2014TC003756

Éditeur(s) : HAL CCSD
Résumé : In SW Yukon – SE Alaska, the boundary between the Pacific and North America plates is characterized by a syntaxis at the transition between the Aleutian subduction to the W and the Fairweather – Queen Charlotte strike-slip faults to the SE. The relative motion is oblique to the main fault structures, and the area is marked by the Yakutat block collision. From the Chugach – Saint Elias mountains in the plate boundary zone (up to 6 000 m high) to the intraplate strike-slip faults, markers of the present-day deformation give information on its partition in the system.During my PhD, I first measure surface deformation using a dense GPS network, deployed up to 500 km inland the North America plate. After precise processing and corrections of transient effects in the area (postseismic and glacial isostatic rebound), a new residual velocity field is produced for the syntaxis area, from which I derive strain rates. Those data allow me to quantify the fault slip rates for Fairweather and southern Denali strike-slip faults, and to characterize a bi-modal deformation pattern: Along the plate boundary, the deformation is localized on large-scale structures (accretionary prism to the W, Fairweather to the E); In the syntaxis area, strain rates are the highest and the GPS data shows a diffuse intraplate deformation, similar to an indentor pattern. The Yakutat block seems to strongly drive the North America plate deformation.This indentor pattern induces strong lateral variations on the large intraplate faults: the Denali – Totschunda – Duke River system. In a second part, I realize a regional geomorphological study to characterize the role and slip rate of those faults. From very high-resolution Digital Elevation Models (~ 1 m), a detailed cartography is done. On the basis of fieldwork observations, I measure offsets of fluvial and glacial markers, which are sampled for dating. A dextral cumulative deformation is highlighted on the northern Denali Fault, where as all southern Denali is marked by vertical deformation. This study allows me to quantify new slip rates for the system Denali – Totschunda – Duke River, and to show the leading role of the Totschunda (~ 14 mm/a) and Duke River (~ 6 mm/a) faults, contrary to the Denali Fault (~ 1 mm/a) North of the syntaxis.The new tectonic model for the Yakutat collision provides an important case study for the understanding of indentor systems. The concomitance of a rigid-block deformation (to the West) and diffuse deformation (to the East), as well as the near-zero slip rate on the lithospheric-scale southern Denali Fault highlight the major control of boundary conditions and the structural heritage on the orogen deformation.
Au SO Yukon – SE Alaska, la frontière entre les plaques Pacifique et Nord-Amérique est marquée par une syntaxe à la transition entre la subduction des Aléoutiennes à l’O et le décrochement de Fairweather – Queen Charlotte au SE. Le mouvement relatif est oblique et la région est marquée par la collision du bloc Yakutat. De la chaine des Chugach – Saint Elias en frontière de plaque (jusqu’à 6 000 m d’altitude) aux grands décrochements intraplaque, les marqueurs de la déformation actuelle apportent des informations sur sa partition dans ce système.Au cours de cette thèse, je m’intéresse dans un premier temps à mesurer la déformation de surface à l’aide d’un réseau GPS dense, déployé jusqu’à 500 km à l’intérieur de la plaque Nord-Amérique. Après un travail minutieux de traitement des données et de correction des effets transitoires (rebond post-glaciaire et post-sismique), un champ de vitesses résiduelles robuste et inédit est produit au niveau de la syntaxe, dont je dérive des taux de déformation. Ces données me permettent de quantifier les vitesses de glissement les failles décrochantes de Fairweather et Denali au Sud, et également de caractériser une déformation bimodale : En frontière de plaques, la déformation est localisée sur les grandes structures (prisme d’accrétion à l’O, Fairweather à l’E) ; Au niveau de la syntaxe, les taux de déformation sont les plus importants et les données GPS mettent en évidence une déformation intraplaque diffuse, similaire à un champ attendu à l’aplomb d’un indenteur. Le bloc Yakutat semble donc contrôler fortement la déformation de la plaque Nord-Amérique.Ce champ de déformation induit des variations latérales fortes sur les grandes failles intraplaque : le système Denali-Totschunda-Duke River. Dans une seconde partie, je réalise une étude géomorphologique régionale pour caractériser le rôle et la vitesse de ces failles. À partir de Modèles Numériques de Terrain très haute résolution (~ 1 m), une cartographie de détail est réalisée. Puis une mission de terrain me permet de mesurer des décalages sur des marqueurs fluviatiles et glaciaires et collecter des échantillons pour les dater. Je mets en évidence une déformation cumulée dextre sur le segment Nord de la faille de Denali, alors que toute la partie Sud déforme verticalement la surface. Cette étude me permet de quantifier de nouvelles vitesses de failles sur le système Denali-Totschunda-Duke River, et de montrer le rôle prépondérant des failles de Totschunda (~ 14 mm/a) et Duke River (~ 6 mm/a) contrairement à la faille de Denali (~ 1 mm/a) au Nord de la syntaxe.Le nouveau modèle cinématique proposé pour la région de collision Yakutat permet d’apporter un nouvel exemple à la compréhension des systèmes d’indenteur. La concomitance d’une déformation de blocs (à l’Ouest) et diffuse (à l’Est), ainsi que l’absence de déformation sur la faille lithosphérique de Denali Sud met en évidence le contrôle majeur des conditions aux limites et de l’héritage structural dans la déformation des orogènes.
https://hal.archives-ouvertes.fr/tel-01241688

tel-01241688
https://hal.archives-ouvertes.fr/tel-01241688
https://hal.archives-ouvertes.fr/tel-01241688/document
https://hal.archives-ouvertes.fr/tel-01241688/file/manuscrit_anais_v2_optimise.pdf

Éditeur(s) : Wiley-blackwell Publishing, Inc
Résumé : P>Torsvik et al. recently presented a revised model for the opening of the South Atlantic Ocean. According to these authors, this new plate tectonic model is internally consistent and consistent with globally balanced plate motion solutions and takes into account realistic intraplate deformation. However, this model shows a number of kinematic and geological problems that we underline here, together with some comparisons with the new kinematic model recently proposed by Moulin et al.
Geophysical Journal International (0956-540X) (Wiley-blackwell Publishing, Inc), 2010-10 , Vol. 183 , N. 1 , P. 20-28

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00014/12504/9878.pdf
DOI:10.1111/j.1365-246X.2010.04727.x
http://archimer.ifremer.fr/doc/00014/12504/

Éditeur(s) : The Geological Society of London
Résumé : Conservational models, like simple shear, pure shear or polyphase models that exclude exchanges between the lower continental crust and upper mantle, are usually proposed to explain the lithospheric stretching and consequent crustal thinning of passive continental margins. These models need large amounts of horizontal movement, and have, therefore, important implications for plate kinematic reconstructions and intraplate deformation. In this paper we propose to show these implications in the Central Segment of the South Atlantic Ocean. In the Angola–Brazilian system, these models imply about 240 km of horizontal movement. This movement can be compensated by two end-member mechanisms: (1) an intraplate deformation located in Africa; and (2) an intraplate deformation located in South America. We detail for each solution the strong geological and geodynamical implications, and discuss the consequences for the genesis of passive continental margins.
Geological Society, special publication (0375-6440) (The Geological Society of London), 2012-02 , Vol. 369 , P. 75-90

Droits : The Geological Society of London 2012
http://archimer.ifremer.fr/doc/00087/19839/17757.pdf
DOI:10.1144/SP369.5
http://archimer.ifremer.fr/doc/00087/19839/

Éditeur(s) : Elsevier Science Bv
Résumé : The opening of the Equatorial and South Atlantic Oceans is still a matter of debate, particularly as concerns the locations of the intraplate deformation. We propose here a critical review of the kinematic models published since Bullard et al., 1965, based on a series of constraints: new interpretation of the magnetic anomalies, seafloor isochrons, flow lines, fracture zones, continental and oceanic homologous structures and radiometric dating of igneous rocks. All of these models present numerous unexplained misfits (gaps, overlaps and misalignments). We present here a new evolution of the Equatorial and South Atlantic Ocean from the tightest reconstruction to Chron C34. This new model confirms the hypothesis of a northward propagation of the South American deformation proposed by Eagles, but rejuvenates slightly the ages for this propagation and refines the plate reconstructions. In particular, we highlight the role of the kinematic "buffer" Santos block, located between the salty Aptian Central segment in the North and the Volcanic Hauterivian Austral segment in the South. The new initial fit presented in this study represents the tightest reconstruction that could be obtained and constitutes the base canvas on which the problem of the continental margin genesis should be addressed.
Earth Science Reviews (0012-8252) (Elsevier Science Bv), 2010 , Vol. 98 , N. 1-2 , P. 1-37

Droits : 2010 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00000/11160/7883.pdf
DOI:10.1016/j.earscirev.2009.08.001
http://archimer.ifremer.fr/doc/00000/11160/

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Large earthquakes nucleate at tectonic plate boundaries, and their occurrence within a plate's interior remains rare and poorly documented, especially offshore. The two large earthquakes that struck the northeastern Indian Ocean on 11 April 2012 are an exception: they are the largest strike-slip events reported in historical times1, 2 and triggered large aftershocks worldwide3. Yet they occurred within an intra-oceanic setting along the fossil fabric of the extinct Wharton basin, rather than on a discrete plate boundary4, 5, 6, 7, 8. Here we show that the 11 April 2012 twin earthquakes are part of a continuing boost of the intraplate deformation between India and Australia that followed the Aceh 2004 and Nias 2005 megathrust earthquakes, subsequent to a stress transfer process recognized at other subduction zones9, 10. Using Coulomb stress change calculations, we show that the coseismic slips of the Aceh and Nias earthquakes can promote oceanic left-lateral strike-slip earthquakes on pre-existing meridian-aligned fault planes. We further show that persistent viscous relaxation in the asthenospheric mantle several years after the Aceh megathrust explains the time lag between the 2004 megathrust and the 2012 intraplate events. On a short timescale, the 2012 events provide new evidence for the interplay between megathrusts at the subduction interface and intraplate deformation offshore. On a longer geological timescale, the Australian plate, driven by slab-pull forces at the Sunda trench, is detaching from the Indian plate, which is subjected to resisting forces at the Himalayan front6, 8, 11.
ISSN: 0028-0836

hal-00767569
https://hal.archives-ouvertes.fr/hal-00767569
DOI : 10.1038/nature11520

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Intraplate deformation is most often linked to major stress applied on plate margins. When such intraplate events are accompanied by magmatism, the use of several dating methods integrated within a multidisciplinary approach can bring constraints on the age, nature and source mobilized for generating the magma and in turn on the nature of the intraplate deformation. This study focuses on the large gabbro Arrikine sill (35 km in extension) emplaced within the Silurian sediments of the western margin of the Murzuq cratonic basin in southeastern Algeria. Its emplacement is dated during the early Devonian (415-400 Ma) through the determination of a reliable paleomagnetic pole by comparison with the Gondwana Apparent Polar Wander Path (APWP). This age can be correlated with deep phreatic eruptions before Pragian time thought to be at the origin of sand injections and associated circular structures in Algeria and Libya. For the sill, the K–Ar age of 325.6 ± 7.7 Ma is related to a K-rich aplitic phase that has K-enriched by more than 20% the Devonian gabbro. Laser-ICP-MS U–Pb method dates only inherited zircons mostly at c. 2030 Ma with additional ages at c. 2700 Ma and younger ones in the 766-598 Ma age range. The Arrikine sill is a high-Ti alkaline gabbro having the geochemical composition of a hawaiite akin to several intraplate continental and oceanic provinces, including the contemporaneous Aïr ring complexes province in Niger, but also to the Mauna Loa volcano in Hawaii. This peculiar composition akin to that of the contemporaneous Aïr province is in agreement with a lower Devonian age for the Arrikine sill.The lower Devonian Arrikine sill emplacement is related to a “Caledonian” transtensive reactivation of the western metacratonic boundary of the Murzuq craton. This event also generated in the Saharan platform the so-called “Caledonian unconformity” of regional extension, the Aïr ring complexes and magmatic rocks that produced sand injections. It could be related to rifting of the Hun terranes that occurred at the plate margin to the north (Stampfli and Borel, 2002, Blackey, 2008 and references therein). The mid-Carboniferous (c. 326 Ma) reactivation corresponds to Variscan compression on NW Africa generating aplitic fluids, but also to the major “Hercynian unconformity” of regional extension. The generation of the Arrikine magma is attributed to partial melting through adiabatic pressure release of uprising asthenosphere along tectonically reactivated mega-shear zones, here bordering the relictual Murzuq craton enclosed in the Saharan metacraton.
ISSN: 0899-5362

hal-01306637
https://hal.archives-ouvertes.fr/hal-01306637
DOI : 10.1016/j.jafrearsci.2015.11.019

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Terrane accretion and intraplate deformation are both common processes occurring during the assembly of large continental masses. The relative roles of these mechanisms are at the heart of a debate concerning the tectonic evolution of the Borborema Province, northeastern Brazil. In the Central subprovince, four terranes or domains have been proposed. In the Alto Moxotó domain, paragneiss of the Sertânia Complex were considered to record a distinct structural and geochronological evolution compared to those in the adjacent Rio Capibaribe domain, in the East. Here, we report the results of a geological study conducted in the type area of the Sertânia Complex. Kinematic criteria and metamorphic mineral assemblages indicate that the main foliation record top-to-the-W tectonic transport under upper amphibolite facies conditions (650–700 °C). The main foliation was affected by overturned folds and upright to inclined folds; the latter two formed coevally with the development of transcurrent shear zones. Samples of mafic orthogneiss and paragneiss tectonically intercalated in the same outcrop were dated by LA-ICP-MS. The orthogneiss sample yields a crystallization age of 1978 ± 8 Ma. Detrital zircons in the paragneiss sample show a multimodal pattern with a well-defined age peak at c. 700 Ma, showing that the paragneiss is younger than 700 Ma and so the main foliation is also younger than this age. In turn, these findings suggest that the occurrence of exclusively Paleoproterozoic zircons in three other dated samples of paragneiss cannot be used to accurately define the deposition age of the detritus. The structural and geochronological characteristics of the Sertânia Complex are similar to those of the Surubim Complex in the Rio Capibaribe domain. Together with previous results showing that the basement of the Alto Moxotó and Rio Capibaribe domains is also similar, we interpret these sequences as having been deposited on a once contiguous tract of continental crust. An accretionary terrane model is thus not required to account for the tectonic evolution of this portion of the Borborema Province. Instead, a model of intracontinental deformation of a preexistent continent is fully supported by the data and also by the lack of evidence for oceanic subduction.
ISSN: 0301-9268

hal-01622825
https://hal.archives-ouvertes.fr/hal-01622825
DOI : 10.1016/j.precamres.2017.07.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deformation of the continental lithosphere is traditionally modeled assuming that heat production in the subcontinental lithospheric mantle is negligible. Although this may be appropriate for highly depleted Archean lithosphere, studies of mantle xenoliths and lithospheric-derived mafic rocks suggest that heat productions of up to 0.4 ;μW/m3 may be attained in the mantle of Phanerozoic and Neoproterozoic regions due to modal metasomatism. To investigate the effect of a local enrichment in heat-producing elements within the lithospheric mantle on the continental deformation, we performed a series of 2D thermo-mechanical models simulating the deformation of a lithospheric plate 1000 km long, which contains in its central part a 200 km wide and 20 km-thick mantle layer with a heat production of 0.05;–0.25 ;μW/m3 between 40 and 80 km depth, leading to a local enhancement of the surface heat flow by 1;–5 mW/m2. Compression models show that a 20 km-thick layer with a heat production as low as 0.05 ;μW/m3 within the shallow lithospheric mantle leads to strain localization in both the enriched mantle and the overlying crust. Strain localization depends exponentially on the temperature increase in the lithosphere section, which is controlled by the volume of metasomatized mantle and the intensity of the metasomatic enrichment in heat-producing elements. A heat production of 0.25 μW/m3 between 60 and 80 km depth results, for instance, in strains within and above the metasomatized mantle 5 times higher than in the surrounding lithosphere. Strain localization also depends on the location of the heat-producing domain and on the plate rheological structure; deeper heat-producing domains and weaker plates leading to stronger localization. These results provide an explanation for strain localization in intraplate environments, leading to the formation of orogenic belts situated hundreds to thousands of kilometers away from known plate boundaries, as observed in the Neoproterozoic belts of Gondwana and in the present-day deformation of the Asian plate.
ISSN: 0012-821X

hal-00411386
https://hal.archives-ouvertes.fr/hal-00411386
DOI : 10.1016/j.epsl.2008.07.040

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Reactivation of structures inherited from previous collisional or rifting events, especially lithospheric-scale faults, is a major feature of plate tectonics. Its expression ranges from continental break-up along ancient collisional belts(1,2) to linear arrays of intraplate magmatism and seismicity(3,4). Here we use multiscale numerical models to show that this reactivation can result from an anisotropic mechanical behaviour of the lithospheric mantle due to an inherited preferred orientation of olivine crystals. We explicitly consider an evolving anisotropic viscosity controlled by the orientation of olivine crystals in the mantle. We find that strain is localized in domains where shear stresses on the inherited mantle fabric are high, and that this leads to shearing parallel to the inherited fabric. During rifting, structural reactivation induced by anisotropy results in oblique extension, followed by either normal extension or failure. Our results suggest that anisotropic viscosity in the lithospheric mantle controls the location and orientation of intraplate deformation zones that may evolve into new plate boundaries, and causes long-lived lithospheric-scale wrench faults, contributing to the toroidal component of plate motions on Earth.
ISSN: 1752-0894

hal-00413033
https://hal.archives-ouvertes.fr/hal-00413033
DOI : 10.1038/ngeo528

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The lithospheric mantle is intrinsically heterogeneous and anisotropic. These two properties govern the repartition of deformation, controlling intraplate strain localization and development of new plate boundaries. Geophysical and geological observations provide clues on the types, ranges, and characteristic length scales of heterogeneity and anisotropy in the lithospheric mantle. Seismic tomography points to variations in geothermal gradient and hence in rheological behavior at scales of hundreds of km. Seismic anisotropy data substantiate anisotropic physical properties consistent at scales of tens to hundreds of km. Receiver functions imply lateral and vertical heterogeneity at scales < 10 km, which might record gradients in composition or anisotropy. Observations on naturally deformed peridotites establish that compositional heterogeneity and Crystal Preferred Orientations (CPOs) are ubiquitous from the mm to the km scales. These data allow discussing the processes that produce/destroy heterogeneity and anisotropy and constraining the time scales over which they are active. This analysis highlights: (i) the role of deformation and reactive percolation of melts and fluids in producing compositional and structural heterogeneity and the feedbacks between these processes, (ii) the weak mechanical effect of mineralogical variations, and (iii) the low volumes of fine-grained microstructures and difficulty to preserve them. In contrast, olivine CPO and the resulting anisotropy of mechanical and thermal properties are only modified by deformation. Based on this analysis, we propose that strain localization at the plate scale is, at first order, controlled by large-scale variations in thermal structure and in CPO-induced anisotropy. In cold parts of the lithospheric mantle , grain size reduction may contribute to strain localization, but the low volume of fine-grained domains limits this effect.
ISSN: 0040-1951

hal-01277174
https://hal.archives-ouvertes.fr/hal-01277174
DOI : 10.1016/j.tecto.2015.07.026

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Temperature and fluid pressure conditions control rock deformation and mineralization on geological faults, and hence the distribution of earthquakes1. Typical intraplate continental crust has hydrostatic fluid pressure and a near-surface thermal gradient of 31 ± 15 degrees Celsius per kilometre2, 3. At temperatures above 300–450 degrees Celsius, usually found at depths greater than 10–15 kilometres, the intra-crystalline plasticity of quartz and feldspar relieves stress by aseismic creep and earthquakes are infrequent. Hydrothermal conditions control the stability of mineral phases and hence frictional–mechanical processes associated with earthquake rupture cycles, but there are few temperature and fluid pressure data from active plate-bounding faults. Here we report results from a borehole drilled into the upper part of the Alpine Fault, which is late in its cycle of stress accumulation and expected to rupture in a magnitude 8 earthquake in the coming decades4, 5. The borehole (depth 893 metres) revealed a pore fluid pressure gradient exceeding 9 ± 1 per cent above hydrostatic levels and an average geothermal gradient of 125 ± 55 degrees Celsius per kilometre within the hanging wall of the fault. These extreme hydrothermal conditions result from rapid fault movement, which transports rock and heat from depth, and topographically driven fluid movement that concentrates heat into valleys. Shear heating may occur within the fault but is not required to explain our observations. Our data and models show that highly anomalous fluid pressure and temperature gradients in the upper part of the seismogenic zone can be created by positive feedbacks between processes of fault slip, rock fracturing and alteration, and landscape development at plate-bounding faults.
ISSN: 0028-0836

hal-01685757
https://hal.archives-ouvertes.fr/hal-01685757
DOI : 10.1038/nature22355

Éditeur(s) : HAL CCSD
Résumé : Differentiation of the lithospheric mantle occurred principally through partial melting and extraction of melts. Harzburgites are generally considered as melting residues whereas lherzolites are regarded as pristine mantle weakly affected by melting. However, some orogenic peridotites show evidence of igneous refertilization. In this context, this work re-investigates the nature of the Lherz lherzolites (Pyrenees), type-locality of lherzolites, described as a piece of preserved fertile mantle. Structural and geochemical data show that these lherzolites are not pristine but formed through a refertilization reaction between MORB-like melts and refractory lithosphere. Moreover, the Lherz peridotites were partly used to infer the composition of the primitive upper mantle and these results may have important implications for the nature of the late veneer. Additionally, crystal-preferred orientations of minerals (CPO) highlight a strong feedback between melt percolation and finite strain in the percolated rocks. CPO variations are ruled by a subtle balance between instantaneous melt fraction and local strain rate. This work also investigated the effect of melt percolation on Hf, Nd and Sr isotopes. Isotope systematics in Lherz shows that strong isotopic decoupling may arise in a percolation front. The modelling suggests that decoupled isotopic signatures are generated during porous flow and governed by the melt/matrix elements concentrations, chemical diffusivities or efficiency of isotopic homogenization. Melt-rock interactions can generate “intraplate-like” isotopic signatures. This suggests that a part of isotopic signatures of mantle-related rocks could be generated by diffusional processes associated with melt transport.
La différenciation du manteau lithosphérique s'est principalement effectuée par fusion partielle et extraction de magmas. Les harzburgites sont généralement considérées comme des résidus de fusion tandis que les lherzolites représentent un manteau originel peu affecté par la fusion. Cependant, certaines péridotites orogéniques montrent des évidences de refertilisation magmatique. Dans ce contexte, ce travail remet en cause la nature primitive des lherzolites de Lherz (Pyrénées), lithotype de la lherzolite. Les données structurales et géochimiques montrent que ces lherzolites ne représentent pas du manteau préservé mais qu'elles se sont formées par une réaction de refertilisation entre un liquide de type MORB et une lithosphère réfractaire. De plus, les orientations préférentielles de réseau (OPR) des minéraux montrent une forte interdépendance entre la percolation magmatique et la déformation finie observée dans les roches percolées. Les variations d'OPR semblent contrôlées par un équilibre subtil entre fraction de liquide instantanée et taux de déformation local. Ce travail a également abordé les effets de la percolation magmatique sur la variabilité isotopique des roches mantelliques. Les résultats montrent qu'un fort découplage isotopique peut s'observer dans un front de percolation. Les modèles suggèrent que le découplage des signatures isotopiques se produit pendant la percolation, gouverné par le rapport des concentrations en éléments (magma/matrice), la diffusivité et le processus d'homogénéisation isotopique. Les réactions magma/roche peuvent générer des signatures isotopiques de type intraplaque. Ceci suggère qu'une part des signatures isotopiques des roches ou laves dérivées du manteau pourrait être produite par des processus diffusionnels associés à du transport de magma.
https://tel.archives-ouvertes.fr/tel-00431325

tel-00431325
https://tel.archives-ouvertes.fr/tel-00431325
https://tel.archives-ouvertes.fr/tel-00431325/document
https://tel.archives-ouvertes.fr/tel-00431325/file/theseleroux08.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : Geophysical Journal International, v. 173, n. 2, p. 473-482, 2008. http://dx.doi.org/10.1111/j.1365-246X.2008.03718.x
International audience
The western Provence in southern France is an intraplate low deforming region, cut by large sinistral strike-slip faults as the Nîmes Fault. The deformation rate of this fault was estimated at 0.1 mm yr−1 from geological and morphological observations. Nevertheless, some large earthquakes occurred in this area in historical times inducing well-documented partial destructions on the roman monument 'Pont-du-Gard'. In order to investigate if this area is seismically active, we installed a temporary seismological network of 14 stations between the cities of Nîmes and Avignon for a 1-yr period (2002 July–2003 June). We recorded and located a total amount of 80 earthquakes of magnitude Ml smaller than 2.8, and of 153 quarry blasts. The seismic event locations are interpreted in terms of regional tectonics as well as of geometry at depth of the Nîmes Fault and of possible seismic activity of the Roquemaure Fault. At the beginning of 2002 September, a catastrophic storm occurred in the same area with cumulated precipitations at 600 mm in 28 hr, causing casualties and major inundations and damages. We identified a clear and sudden increase of the seismic activity as an immediate consequence of this exceptional meteorological phenomenon. We interpret this rainfall triggering of earthquakes as the response of the crust to an abrupt vertical loading. The geological context of this zone is characterized by the presence of sedimentary basins and of an important karstic network in a calcareous environment allowing the retention of a third of the total rainwater volume during few weeks after the catastrophic storm. Month by month inversion of the seismic wave velocities for only the first 1-km thick layer of the crust allows investigating the influence of the stored water. A clear decrease of both P- and S-velocities, and an increase of the Vp/Vs ratio are evidenced. The variations obtained are at 2, 6 and 4.5 per cent for P-, S-velocities and Vp/Vs ratio, respectively. These variations are discussed in confront of previous studies and can be directly related to the known water volume.
ISSN: 0956-540X

hal-00407884
https://hal.archives-ouvertes.fr/hal-00407884
https://hal.archives-ouvertes.fr/hal-00407884v2/document
https://hal.archives-ouvertes.fr/hal-00407884/file/rigoGJI2008.pdf
DOI : 10.1111/j.1365-246X.2008.03718.x