Éditeur(s) : Elsevier
Résumé : High P-wave velocities (7.1-7.8 km/s) lower crustal bodies (LCBs) imaged along volcanic margins are commonly interpreted as plume and break-up-related thick mafic underplating. This interpretation is partly challenged in this paper based on new seismic observations and modelling of the outer Voring Basin (Norway). An exceptional strong amplitude reflection, the T Reflection, is particularly well defined below the North Gjallar Ridge (NGR) between 7 and 8 s TWT. The T Reflection is located near the volcanic lava flows emplaced during the NE Atlantic breakup (similar to 55-54 Ma ago) and coincides with the top of the LCB, forming a mid-crustal dome. Based on structural and temporal relationships, we show that the dome clearly influences the structural development of the NGR and predates the continental breakup at least by 10-15 Ma. Using a thermo-kinematical model, we tried also to investigate and quantify the relationships between the extension, LCB and the magmatic production. Modelling suggests that significant Paleocene-Early Eocene magmatism can be produced without any temperature anomaly in the mantle if differential stretching occurs during the break-up initiation. The conclusion of 2D thermo-kinematical parametric analysis is that the magmatic model predicts, either little extension (beta < 2) with no melting or high extension (beta > 5) with significant melting along the outer Voring Basin. We suggest that the continental part of the LCB could not necessarily be breakup-related and so magmatic, as has often been stated previously. It is concluded here that the continental part of the LCB observed beneath the outer Voring Basin may be partly (or fully) attributed to inherited, high-pressure granulite/eclogite lower crustal rocks. The real amount of mafic material emplaced along the outer Voring Basin could be 20-40% less than thought.
Tectonophysics (0040-1951) (Elsevier), 2006 , Vol. 412 , N. 3-4 , P. 255-278

Droits : 2005 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-1042.pdf
DOI:10.1016/j.tecto.2005.10.038
http://archimer.ifremer.fr/doc/00000/1042/

Éditeur(s) : Amer Geophysical Union
Résumé : The Algerian margin has originated from the opening of the Algerian basin about 25-30 Ma ago. The central margin provides evidence for large-scale normal faults of Oligo-Miocene age, whereas transcurrent tectonics characterizes the western margin. A set of NW-SE oriented dextral transform faults was active during basin opening and divided the 600 km long central margin into segments of similar to 120-150 km. The upper Miocene, Plio-Quaternary, and present-day tectonic setting is, however, compressional and supports the occurrence of a margin inversion, a process still poorly documented worldwide. We show that the central Algerian margin represents a rare example of inverted margin, where the process of subduction inception is particularly well expressed and helps understand how extensional and transtensive structures are involved in margin shortening. Using multibeam bathymetry and multichannel seismic reflection sections from the MAR-ADJA 2003 and 2005 cruises, we evidence Pliocene-Pleistocene shortening with contrasting styles along the margin between west (Khayr Al Din bank) and east (Boumerdes-Dellys margin) of Algiers. Pre-Miocene structures such as basement highs and transform faults appear to control changes of the deformation pattern along this part of the margin, resulting in different widths, geometries, and relative positions of folds and faults. Plio-Quaternary and active blind thrust faults do not reuse Oligo-Miocene normal and transform faults during inversion, but instead grow within the continental margin (as testified for instance by the 21 May 2003 M-w 6.8 Boumerdes-Zemmouri earthquake), at the foot of the continental slope and at the northern sides of basement highs interpreted as stretched continental blocks of the rifted margin. The inherited structures of the margin appear, therefore, to determine this deformation pattern and ultimately the earthquake and tsunami sizes offshore. The complex geometry of the fault system along the Algerian margin suggests a process of initiation of subduction in its central and eastern parts.
Tectonics (0278-7407) (Amer Geophysical Union), 2010-03 , Vol. 29 , N. TC2008 , P. 1-22

Droits : 2010 American Geophysical Union
http://archimer.ifremer.fr/doc/00008/11883/9286.pdf
http://archimer.ifremer.fr/doc/00008/11883/9287.pdf
DOI:10.1029/2009TC002547
http://archimer.ifremer.fr/doc/00008/11883/

Éditeur(s) : HAL CCSD
Résumé : In Taiwan , the subduction of the Chinese continental margin under the Luzon arc results in the progressive growth of an active orogenic wedge. It is one of the best places to study the complex relationships that occurs between the tectonic processes controlling deformation (plate rheology and kinematics, metamorphism and magmatism) and surface processes (erosion and sedimentation). In order to study the kinematics of the present day convergence of Philippine Sea plate to the Asian continent around Taiwan, we perform 2D and 3D sandbox modeling and we analyzed the models with PIV (Particle Image Velocimetry) software. In 2D experiments, a model Coulomb wedge is submitted to erosion and sedimentation under topography and flux steady state conditions. The 3D experiments are mainly used to study the escape tectonics occurring in the middle west and southwest Taiwan. A wedge shaped indenter and a basement relief were used to simulate the mechanical plate boundary between Philippine Sea plate and Eurasia plate and the basement topography to the west of Taiwan respectively. We examine the exhumation patterns, the mode of fault propagation and displacement patterns by strain partitioning of vertical vs. horizontal displacement and convergent parallel vs. orogen parallel components. The preliminary conclusions are: 1. The interactions between tectonics, erosion and sedimentation control geometry and kinematics of the doubly vergent transpressional orogen. 2. Exhumation processes are controlled by the balance between erosion, frontal accretion and underplating in different structural domains of the wedge. 3. Retrowedge erosion favorites backfolding and backthrusting, induces flower structures and fan shaped cleavage distribution. 4. Sedimentation promotes underplating and out-of sequences thrusting. 5. Continental subduction or subduction of topographic highs will enhance underthrusting/underplating, thick-skin tectonics and inversion of sedimentary basin.
Bolletino di Geofisica teorica ed applicata

hal-00411133
https://hal.archives-ouvertes.fr/hal-00411133

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
1] Recent statistical analysis by Lallemand et al. (2008) of subduction zone parameters revealed that the back-arc deformation mode depends on the combination between the subducting (nu(sub)) and upper (nu(up)) plate velocities. No significant strain is recorded in the arc area if plate kinematics verifies nu(up) = 0.5 vsub - 2.3 (cm/a) in the HS3 reference frame. Arc spreading ( shortening) occurs if nu(up) is greater ( lower) than the preceding relationship. We test this statistical law with numerical models of subduction, by applying constant plate velocities far away from the subduction zone. The subducting lithosphere is free to deform at all depths. We quantify the force applied on the two converging plates to sustain constant surface velocities. The simulated rheology combined viscous (non-Newtonian) and brittle behaviors, and depends on water content. The influence of subduction rate vs is first studied for a fixed upper plate. After 950 km of convergence ( steady state slab pull), the transition from extensional to compressive stresses in the upper plate occurs for vs similar to 1.4 cm/a. The effect of upper plate velocity is then tested at constant subduction rate. Upper plate retreat ( advance) with respect to the trench increases extension ( compression) in the arc lithosphere and increases ( decreases) the subducting plate dip. Our modeling confirms the statistical kinematic relationship between vsub and nu(up) that describes the transition from extensional to compressive stresses in the arc lithosphere, even if the modeled law is shifted toward higher rates of upper plate retreat, using our set of physical parameters ( e. g., 100 km thick subducting oceanic plate) and short- term simulations. Our results make valid the choice of the HS3 reference frame for assessing plate velocity influence on arc tectonic regime. The subduction model suggests that friction along the interplate contact and the mantle Stokes reaction could be the two main forces competing against slab pull for upper mantle subductions. Besides, our simulations show that the arc deformation mode is strongly time dependent.
ISSN: 1525-2027

hal-00412328
https://hal.archives-ouvertes.fr/hal-00412328
https://hal.archives-ouvertes.fr/hal-00412328/document
https://hal.archives-ouvertes.fr/hal-00412328/file/arcayG32008.pdf
DOI : 10.1029/2007GC001875

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Mosha and North Tehran faults correspond to the nearest seismic sources for the northern part of the Tehran megacity. The present-day structural relationships and the kinematics of these two faults, especially at their junction in Lavasanat region, is still a matter of debate. In this paper, we present the results of a morphotectonic analysis (aerial photos and field investigations) within the central part of the Mosha and eastern part of the North Tehran faults between the Mosha valley and Tehran City. Our investigations show that, generally, the traces of activity do not follow the older traces corresponding to previous long-term dip-slip thrusting movements. The recent faulting mainly occurs on new traces trending E-W to ENE-WSW affecting Quaternary features (streams, ridges, risers, and young glacial markers) and cutting straight through the topography. Often defining en-echelon patterns (right- and left-stepping), these new traces correspond to steep faults with either north- or south-dipping directions, along which clear evidences for left-lateral strike-slip motion are found. At their junction zone, the two sinistral faults display a left-stepping en-echelon pattern defining a positive flower structure system clearly visible near Ira village. Further west, the left-lateral strike-slip motion is transferred along the ENE-WSW trending Niavaran fault and other faults. The cumulative offsets associated with this left-lateral deformation is small compared with the topography associated with the previous Late Tertiary thrusting motion, showing that it corresponds to a recent change of kinematics.
ISSN: 0040-1951

hal-00617778
https://hal.archives-ouvertes.fr/hal-00617778
DOI : 10.1016/j.tecto.2010.09.013

Éditeur(s) : Amer Geophysical Union
Résumé : A tectonic model of the evolution of the northern half of the South Fiji Basin, including the Minerva Triple Junction and Cook Fracture Zone, is developed from regional gravity, multibeam bathymetry, and a new interpretation of magnetic anomalies pinned to radiometric dates of oceanic crust in the basin. The geometry and age of a portion of the Minerva Triple Junction and the Cook-Minerva spreading center (the connection from the triple junction to the Cook Fracture Zone, which accommodated coeval opening of the Norfolk Basin), are resolved with multibeam bathymetry and magnetics. The South Fiji Basin opened from about 34 to 15 Ma in an anticlockwise sweep about an Euler pole located at the northern end of the present Lau Ridge. This rotation and a rigidly straight southeastward motion of the Three Kings Ridge were accommodated by the configuration of the triple junction changing from ridge-fault-fault to ridge-ridge-fault to ridge-ridge-ridge. During this evolution the southeastern arm of the system, the Julia Fracture Zone, underwent several transformations and the Cook-Minerva spreading center experienced repeated ridge jumps. The kinematics of the northern South Fiji Basin dictate, to a large extent, the evolution of the southern South Fiji Basin and the Norfolk Basin. This in turn leads to the interpretation of a complex trench-trench-double transform fault framework at the northern New Zealand margin, which explains most aspects of the geology, structure, and arc volcanic history of the margin and provides a radical new setting for the origin of the Northland Allochthon.
Geochemistry Geophysics Geosystems (1525-2027) (Amer Geophysical Union), 2011-02 , Vol. 12 , N. Q02004 , P. 1-20

Droits : 2011 American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00030/14112/11362.pdf
DOI:10.1029/2010GC003291
http://archimer.ifremer.fr/doc/00030/14112/

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Subduction of a narrow slab of oceanic lithosphere beneath a tightly curved orogenic arc requires the presence of at least one lithospheric scale tear fault. While the Calabrian subduction beneath southern Italy is considered to be the type example of this geodynamic setting, the geometry, kinematics and surface expression of the associated lateral, slab tear fault offshore eastern Sicily remain controversial. Results from a new marine geophysical survey conducted in the Ionian Sea, using high-resolution bathymetry and seismic profiling reveal active faulting at the seafloor within a 140 km long, two-branched fault system near Alfeo Seamount. The previously unidentified 60 km long NW trending North Alfeo Fault system shows primarily strike-slip kinematics as indicated by the morphology and steep-dipping transpressional and transtensional faults. Available earthquake focal mechanisms indicate dextral strike-slip motion along this fault segment. The 80 km long SSE trending South Alfeo fault system is expressed by one or two steeply dipping normal faults, bounding the western side of a 500+ m thick, 5 km wide, elongate, syntectonic Plio-Quaternary sedimentary basin. Both branches of the fault system are mechanically capable of generating magnitude 6–7 earthquakes like those that struck eastern Sicily in 1169, 1542, and 1693.
ISSN: 0278-7407

insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887/document
https://hal-insu.archives-ouvertes.fr/insu-01256887/file/GutscherEtal_2015_Tectonics.pdf
DOI : 10.1002/2015TC003898

Éditeur(s) : HAL CCSD MAIK Nauka/Interperiodica
Résumé : International audience
The paper is concerned with the kinematics of the major faults, their pattern, and the time of occurrence of compression and extension deformations in the southeast of the Eastern Sayan. The geometry of the mountain ranges and the kinematics of the major faults exhibit northeast-oriented compression responsible for the current processes of relief formation, which corresponds to the direction of the vector of deformations associated with the Indo-Asian collision. The results obtained thus far may be indicative of the remote influence of collision on the orogenic activity and transpressional deformations in the Eastern Sayan since the end of the Miocene. Morphotectonic analysis has shown that the areas of Quaternary extension- related deformations in the Eastern Sayan are not a response to active rifting in the Baikal Rift Zone. The position and geometry of the subsided blocks and magma ruptures point to the fact that they form locally as extension structural elements near the strike-slip faults. The strike-slip and thrust faults are widespread and play the leading role in the development of the southeastern part of the Eastern Sayan.
ISSN: 0016-8521

insu-00667345
https://hal-insu.archives-ouvertes.fr/insu-00667345
DOI : 10.1134/S001685211101002X

Éditeur(s) : HAL CCSD MAIK Nauka/Interperiodica
Résumé : Interaction between surface processes and deep tectonic processes plays a key role in the structural evolution, kinematics and exhumation of rocks in orogenic wedges. The deformation patterns observed in analogue models applied to natural cases of present active or ancient mountain belts reflect several first order processes that result of these interactions. Internal strain partitioning due to mechanical behaviour of a thrust wedge has a strong impact on the vertical component of displacement of tectonic units that in return favour erosion in domains of important uplift. Such strain partitioning is first controlled by tectonic processes, but surface processes exert a strong feed back on wedge dynamics. Indeed, material transfer in thrust wedges not only depends on its internal dynamics, it is also influenced by climate controlled surface processes involving erosion and sedimentation. Effects of erosion are multiple: they allow long term localization of deformed domains, they favour important exhumation above areas of deep underplating and combined with sedimentation in the foreland they contribute to maintain the wedge in a critical state for long time periods. The simple models illustrate well how mountain belts structure, kinematics of tectonic units and exhumation are determined by these complex interactions.
ISSN: 0016-8521

hal-00561361
https://hal.archives-ouvertes.fr/hal-00561361
DOI : 10.1134/S0016852110060075

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Lithospheric-scale faults related to oblique subduction are responsible for some of the most hazardous earthquakes reported worldwide. The mega-thrust in the Sunda sector of the Sumatran oblique subduction has been intensively studied, especially after the infamous 2004 Mw 9.1 earthquake, but its onshore kinematic complement within the Sumatran subduction, the transform Sumatran Fault System, has received considerably less attention. In this paper, we apply a combination of analysis of Digital Elevation Models (ASTER GDEM) and field evidence to resolve the kinematics of the leading edge of deformation of the northern sector of the Sumatran Fault System. To this end, we mapped the northernmost tip of Sumatra, including the islands to the northwest, between 4.5°N and 6°N. Here, major topographic highs are related to different faults. Using field evidence and our GDEM structural mapping, we can show that in the area where the fault bifurcates into two fault strands, two independent kinematic regimes evolve, both consistent with the large-scale framework of the Sumatran Fault System. Whereas the eastern branch is a classic Riedel system, the western branch features a fold-and-thrust belt. The latter contractional feature accommodated significant amounts (c. 20%) of shortening of the system in the study area. Our field observations of the tip of the NSFS match a strain pattern with a western contractional domain (Pulau Weh thrust splay) and an eastern extensional domain (Pulau Aceh Riedel system), which are together characteristic of the tip of a propagating strike-slip fault, from a mechanical viewpoint. For the first time, we describe the strain partitioning resulting from the propagation of the NSFS in Sumatra mainland. Our study helps understanding complex kinematics of an evolving strike-slip system, and stresses the importance of field studies in addition to remote sensing and geophysical studies.
ISSN: 0040-1951

hal-01467196
https://hal.archives-ouvertes.fr/hal-01467196
DOI : 10.1016/j.tecto.2016.04.050

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : orogenic wedges
Interaction between surface and tectonic processes plays a key role in the structural evolution, kinematics, and exhumation of rocks in orogenic wedges. The deformation patterns observed in analog models show that strain partitioning has a strong impact on the vertical component of displacement of tectonic units, which in return favors erosion in domains of important uplift. Partitioning is controlled by tectonic processes and by climate-dependent surface processes, including erosion and sedimentation. The effects of partitioning include localization of deformed domains, exhumation above areas of deep underplating, and steady-state maintenance of wedges for long time periods. Simple models illustrate well how the morphostructural evolution of mountain belts is determined by these complex interactions.
ISSN: 1052-5173

hal-00558931
https://hal.archives-ouvertes.fr/hal-00558931
DOI : 10.1130/GSATG48A.1

Éditeur(s) : Amer Geophysical Union
Résumé : The origin of the Algerian margin remains one of the key questions still discussed in the Western Mediterranean sea, due to the imprecise nature and kinematics of the associated basin during the Neogene. For the first time, the deep structure of the Maghrebian margin was explored during the SPIRAL seismic survey. In this work, we present a N-S transect off Tipaza (west of Algiers), a place where the margin broadens due to a topographic high (Khayr-al-Din Bank). New deep penetration seismic profiles allow us to image the sedimentary sequence in the Algerian basin and the crustal structure at the continent-ocean boundary. Modeling of the wide-angle data shows thinning of the basement, from more than 15km in the continental upper margin to only 5–6km of oceanic-type basement in the Algerian basin, and reveals a very narrow or absent transitional zone. Analysis of the deep structure of the margin indicates features inherited from its complex evolution: (1) an oceanic-type crust in the deep basin, (2) similarities with margins formed in a transform-type setting, (3) a progressive deepening of the whole sedimentary cover, and the thickening of the Plio-Quaternary sediments at the margin foot, coeval with (4) a downward flexure of the basement in the basin. These features argue for a multiphased evolution of the margin, including (1) an early stage of rifting and/or spreading, (2) a late transcurrent episode related to the westward migration of the Alboran domain, and (3) a diffuse Plio-Quaternary compressional reactivation of the margin.
Journal Of Geophysical Research-solid Earth (0148-0027) (Amer Geophysical Union), 2013-08 , Vol. 118 , N. 8 , P. 3899-3916

Droits : 2013. American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00152/26333/24412.pdf
DOI:10.1002/jgrb.50318
http://archimer.ifremer.fr/doc/00152/26333/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
A network of 54 survey GPS sites, 28 continuous GPS stations and three absolute gravity (AG) observation sites have been set up in the Alborz mountain range to quantify the present-day kinematics of the range. Our results allow us to accurately estimate the motion of the South Caspian block (SCB) for the first time, and indicate rotation of the SCB relative to Eurasia, accounting for the left lateral motion in the Alborz range. In light of these new results, it clearly appears that deformation rates vary along the range, the eastern part accommodating mainly left lateral strike slip (2 mm yr(-1) south of the range and 5 mm yr(-1) north of the range) with a very low range normal shortening rate on the Khazar thrust fault (similar to 2 mm yr(-1)), and the western part accommodating range normal shortening (similar to 6 mm yr-1) on the Khazar thrust fault with a left lateral component of similar to 2 mm yr(-1) north of the range and 1 mm yr(-1) south of the range. These present-day kinematics agree with geomorphologic estimated slip rates, but not the long-term deformation, corroborating the idea that the kinematics of the range have changed recently due to the change of SCB motion.;Modelling of the interseismic deformation suggests a deep locking depth on the central-western segment of the Khazar fault (similar to 30 km) in agreement with the Baladeh earthquake rupture and aftershock ranging between 10 and 30 km. Given this unusual deep locking depth and the 34 degrees dip of the thrust, a large part of the Alborz range is located above the seismically coupled part of the fault. Based on our AG measurements this part of the range seems to uplift at a rate of 1-5 mm yr(-1), in agreement with terrace uplift.
ISSN: 0956-540X

hal-00617146
https://hal.archives-ouvertes.fr/hal-00617146
https://hal.archives-ouvertes.fr/hal-00617146v2/document
https://hal.archives-ouvertes.fr/hal-00617146/file/djamour2010.pdf
DOI : 10.1111/j.1365-246X.2010.04811.x

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] The Pyrenees, north of the North Pyrenean fault, display a complex structure involving a succession of peridotite massifs, basement massifs, and mid-Cretaceous to Late Cretaceous basins located in a narrow domain, which was affected by a mid-Cretaceous, preorogenic, high-temperature, low-pressure metamorphism. The Late Cretaceous basins were interpreted either as pull-apart basins formed during transcurrent motion of Iberia relative to Eurasia or as remnants of a larger extensional basin. Recent models support that peridotite massifs result from the exhumation of the mantle during this preorogenic event. The northern boundary of the Agly basement massif shows evidence of ductile deformation of the basal formations of the Agly sedimentary cover. Macroscopic and microscopic kinematics indicators consistent with asymmetry of crystallographic fabrics suggest normal sense of shear and thus suggest detachment, at least partial, of the Mesozoic cover from its basement. Triassic to Early Cretaceous limestones are mylonitic and consistently shows a foliation, a NS- to NE-trending lineation, shear criteria suggesting top-to-the-north shearing and locally boudinage. At the microscopic scale, mylonites are characterized by a very fine grain size, frequently <10 µm. They contain larger, partially recrystallized calcite parent grains and undeformed quartz grains with calcite fringes crystallized in pressure shadows. In these mylonites, calcite systematically shows a weak but well-defined crystallographic-preferred orientations, suggesting HT dislocation creep combined to diffusion creep and possibly grain boundary sliding in the finest fraction of the mylonites. Paleotemperatures determined using Raman spectrometry suggest synkinematic temperature conditions in the range 340-390°C, in good agreement with observed microstructures and calcite CPO. The mylonitic fabric in Mesozoic limestones is folded by EW-trending Pyrenean folds north of the Agly basement massif, attesting that this fabric formed before the Pyrenean orogeny. These data consistently support preorogenic extension under medium-temperature conditions of the northern Agly massif and likely of the massif itself. Since simultaneously (~100 Ma) a mid-Cretaceous basin opened south of the basement massif, we suggest a model of preorogenic exhumation of the Agly massif in response to the regional extension associated to the rotation of Iberia. This model may explain the exhumation of the North Pyrenean massifs during a single preorogenic event that allowed the opening of extensional basins and the exhumation of the lithospheric mantle. All these structures being subsequently reworked during the Pyrenean orogeny.
ISSN: 0278-7407

hal-00852833
https://hal.archives-ouvertes.fr/hal-00852833
DOI : 10.1002/tect.20015

Éditeur(s) : HAL CCSD
Résumé : The aim of this thesis is to analyze the variations in slip rates along strike-slip faults, in intracontinental domain, producing large earthquakes (M > 7.5). To illustrate these variations, this work has focused in two area located in the most tectonically active continental domains in the world: in the western part of Mongolia (Bogd and Bulnay faults) and in the northern part of Iran (Astaneh and Tabriz faults). Using morphotectonic and paleoseismological analyses, the kinematics, the slip rates and the recurrence times have been estimated and allow us to describe the characteristics of seismic cycle along these faults. In Mongolia, the slip rates are estimated at ~ 1,2 and ~ 2,6 mm/yr along the Bogd and the Bulnay faults, respectively, with no variations of geological slip rates over the late Pleistocene-Holocene period. These two faults present characteristic slips and similar recurrence times between large earthquakes. The paleoseismological investigations suggest that a cluster occurred 3000 years ago, similar to the seismic cluster recorded in Mongolia during the XX century. In Iran, the slip rate was estimated to 2 mm/yr along the Astaneh fault and the recurrence times are ranging from 1600 to 2200 years, associated with offsets comprised between 3 and 4,5 m. We have also estimated a slip rate of ~ 7 mm/yr along the Tabriz fault, in agreement with the present day rate estimated by GPS, suggesting no variations in the slip rate over the past 45 ka.
Ce travail de thèse a pour but d'analyser les variations de vitesses sur des grandes failles décrochantes en contexte intracontinental, capables de produire des séismes de très fortes magnitudes (M > 7.5). Afin d'illustrer ces variations d'activités, cette analyse a été effectuée sur deux zones d'études situées en domaine continental et sismiquement actives: la région ouest de la Mongolie (failles de Bogd et Bolnay) et le nord de l'Iran (failles d'Astaneh et de Tabriz). À partir d'une approche morphotectonique et paléosismologique, les cinématiques, les vitesses de failles et les intervalles de récurrence entre les séismes majeurs ont été estimés, permettant d'analyser les caractéristiques du cycle sismique sur chacune des failles. En Mongolie, les failles de Bogd et Bolnay présentent respectivement des vitesses de ~ 1,2 et 2,6 mm/an, qui semblent être constantes sur la période Pleistocène supérieur-Holocène. Ces deux failles présentent également des glissements caractéristiques et des intervalles de temps similaires entre les séismes majeurs. Les analyses paléosismologiques suggèrent qu'un essaim sismique comparable à celui enregistré au XXème siècle a eu lieu il y a environ 3000 ans. En Iran, une vitesse géologique de 2 mm/an a été estimée sur la faille d'Astaneh et les données paléosismologiques suggèrent des intervalles de récurrence de 1800 ans, associés à des déplacements en surface compris entre 3 et 4,5 m. Nous avons également estimé une vitesse de 7 mm/an sur la faille de Tabriz, en accord avec les données GPS, suggérant que la vitesse sur cette faille est constante depuis 45 ka.
https://tel.archives-ouvertes.fr/tel-00591794

tel-00591794
https://tel.archives-ouvertes.fr/tel-00591794
https://tel.archives-ouvertes.fr/tel-00591794/document
https://tel.archives-ouvertes.fr/tel-00591794/file/these_rizza.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use velocities from 65 continuous stations and 31 survey-mode GPS sites as well as kinematic modeling to investigate present day deformation along the Africa-Iberia plate boundary zone in the western Mediterranean region. The GPS velocity field shows southwestward motion of the central part of the Rif Mountains in northern Morocco with respect to Africa varying between 3.5 and 4.0 mm/yr, consistent with prior published results. Stations in the southwestern part of the Betic Mountains of southern Spain move west-southwest with respect to Eurasia (similar to 2-3 mm/yr). The western component of Betics motion is consistent with partial transfer of Nubia-Eurasia plate motion into the southern Betics. The southward component of Betics motion with respect to Iberia is kinematically consistent with south to southwest motion of the Rif Mountains with respect to Africa. We use block modeling, constrained by mapped surface faults and seismicity to estimate the geometry and rates of strain accumulation on plate boundary structures. Our preferred plate boundary geometry includes one block between Iberia and Africa including the SW Betics, Alboran Sea, and central Rif. This geometry provides a good fit to the observed motions, suggesting a wide transpressive boundary in the westernmost Mediterranean, with deformation mainly accommodated by the Gloria-Azores fault system to the West and the Rif-Tell lineament to the East. Block boundaries encompass aspects of earlier interpretations suggesting three main deformation styles: (i) extension along the NE-SW trending Trans-Alboran shear zone, (ii) dextral strike-slip in the Betics corresponding to a well defined E-W seismic lineament, and (iii) right lateral strike-slip motion extending West to the Azores and right-lateral motion with compression extending East along the Algerian Tell. We interpret differential motion in the Rif-Alboran-Betic system to be driven both by surface processes related the Africa-Eurasia oblique convergence and sub-crustal dynamic processes associated with the long history of subduction of the Neotethys ocean lithosphere. The dextral slip identified in the Betic Mountains in Southern Spain may be related to the offshore fault that produced the Great 1755 Lisbon Earthquake, and as such may represent a significant seismic hazard for the West Mediterranean region.
ISSN: 0012-821X

hal-00618337
https://hal.archives-ouvertes.fr/hal-00618337
DOI : 10.1016/j.epsl.2011.05.048

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Detailed structural and petrological mapping in the Beni Bousera peridotite (Rif Belt, northern Morocco) shows that this orogenic peridotite massif is composed of four tectono-metamorphic domains with consistent kinematics, marked by a pervasive, shallowly dipping foliation with a NW-SE stretching lineation that progressively rotates towards a NNE-SSW orientation in the lowermost part of the massif. From top to bottom, these domains are garnet-spinel mylonites, Ariègite subfacies fine-grained porphyroclastic spinel peridotites, Ariègite-Seiland subfacies porphyroclastic, and Seiland subfacies coarse-porphyroclastic to coarse-granular spinel peridotites. Microstructures and crystal preferred orientations point to deformation dominantly by dislocation creep in all domains, but the continuous increase in average olivine grain size indicates decreasing plastic work rates from top to bottom. This evolution in deformation conditions is consistent with the change in synkinematic pressure and temperature conditions, from 900°C at 2*0 GPa in garnet-spinel mylonites to 1150°C at 1*8 GPa in the Seiland domain. A pervasive diffuse dunitic-websteritic layering subparallel to the foliation suggests deformation in the presence of melt in the Seiland domain. Gravitational instabilities owing to local melt accumulation may account for <200 m wide areas exhibiting a vertical lineation in this domain. To account for the consistent kinematics and the tectono-metamorphic evolution, which implies a temperature gradient of c. 125°C km−1 preserved across the Beni Bousera massif, we propose that the entire massif records the functioning of a low-angle shear zone, a few kilometres wide, which accommodated exhumation of the base of the lithosphere from ∼90 to ∼60 km depth. Partial melting in the Seiland domain may be explained by fast decompression of the footwall, without the need for exotic heat sources. Moreover, if the present-day orientation of the shear zone is similar to that when it was active in the mantle, the stretching lineations at high angle to the metamorphic gradient imply that shearing parallel to the trend of the belt accompanied thinning; that is, a transtensional deformation of the margin.
ISSN: 0022-3530

hal-00950056
https://hal.archives-ouvertes.fr/hal-00950056
DOI : 10.1093/petrology/egt067

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimental modelling applied to the study of orogenic wedge dynamics has been a subject of fruitful research for more than 30 years, although the technique dates back as far as the early XIXth century. On one hand, several first order parameters controlling the structural evolution of mountain belts have been intensively investigated using the classic tectonic "sandbox" models. The main parameters are the properties of the basal décollement, the deforming material, the backstop, and fluxes, kinematics and surface processes. On the other hand, the morphological evolution of a mountain relief subjected to changing tectonic or climatic forcing has been addressed using another kind of approach called "geomorphic" models. Nowadays, the literature is extremely rich, particularly for the sandbox technique, so that it becomes difficult to have an exhaustive view of the effects of the above parameters on mountain evolution. In this article, we propose a detailed review of the main results obtained using both "tectonic" and "geomorphic" approaches. Our goal is to provide an almost complete state-of-the-art in the experimental study of relief dynamics to guide present and future researchers in their understanding of mountain belt evolution.
ISSN: 0040-1951

hal-00757713
https://hal.archives-ouvertes.fr/hal-00757713
DOI : 10.1016/j.tecto.2012.01.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Aegean domain is a key area for understanding the processes of back-arc extension. Observed deformation pattern and present day kinematics result from the interaction between the southward retreat of the Hellenic trench and the westward escape of Anatolia. Lithosphere-scale analogue models were employed to display that the overall pattern of Aegean extension requires not only the combination of trench retreat and Anatolia escape since middle Miocene but also the presence of an inherited lithosphere-scale mechanical discontinuity: the Vardar Suture Zone (VSZ). The reactivation in dextral shear of the eastern branch of the VSZ accommodates both the trench retreat (NS stretching) and the westward escape of Anatolia (EW shortening) in the Cyclades area since middle Miocene. Additionally, our model shows that the North Anatolian Fault (NAF) is a late structure in the evolution of the Aegean, initiated around 10 Ma after the onset of Anatolia escape. The displacement field at the surface of the model allows the identification of sub-domains, which result from strain partitioning instead of being "rigid microplates", directly comparable to the present-day displacement field (GPS) of the Aegean and western Anatolia. Our model provides a simple but powerful way to look at the dynamics of Aegean extension in two main stages. From middle Eocene to middle Miocene, extension was only driven by the southward retreat of the Hellenic trench at a rate lower than 1 cm*y− 1. Since middle Miocene, the combination of slab rollback with Anatolia westward escape resulted in a southwest direction of trench retreat, with an accelerating rate of up to 3 cm*y− 1.
ISSN: 0040-1951

insu-01066042
https://hal-insu.archives-ouvertes.fr/insu-01066042
https://hal-insu.archives-ouvertes.fr/insu-01066042/document
https://hal-insu.archives-ouvertes.fr/insu-01066042/file/Philippon-brun-tect-2014-HAL.pdf
DOI : 10.1016/j.tecto.2014.04.039

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study analyzes the active tectonics within the northwestern and southeastern extensions of the Pambak-Sevan-Syunik fault (PSSF), a major right-lateral strike-slip fault cutting through Armenia. Quantifying the deformations in terms of geometry, kinematics, slip rates and earthquake activity, using cosmogenic 3He, OSL/IRSL and radiocarbon dating techniques, reveal different behaviors between the two regions. Within the northwestern extension, in the region of Amasia, the PSSF bends to the west and splits into two main WNW–ESE trending reverse faults defining a compressional pop-up structure. We estimate an uplift rate and a shortening rate of 0.5 ± 0.1 mm/y and 1.4 ± 0.6 mm/y, respectively. This suggests that most of the ∼2 mm/y right lateral movement of the PSSF seems to be absorbed within the Amasia pop-structure. Within the southeastern extension, the PSSF shows signs of dying out within the Tsghuk Volcano region at the southernmost tip of the Syunik graben. There, the tectonic activity is characterized by a very slow NS trending normal faulting associated with a slight right-lateral movement. Slip rates analyses (i.e. vertical slip rate, EW stretching rate at 90° to the fault, and right-lateral slip rate of ∼0.2 mm/y, ∼0.1 mm/y and ∼0.05 mm/y, respectively) lead to the conclusion that the right lateral movement observed further north along the PSSF is mainly transferred within other active faults further west within the Karabagh (Hagari fault or other structures further northwestwards). Comparing our slip rates with those estimated from GPS data suggests that most of the deformation is localized and seismic, at least within the Tsghuk region. The geometrical and kinematic pattern observed within the two terminations of the PSSF suggests that the fault and its surrounding crustal blocks are presently rotating anticlockwise, as also observed within the GPS velocity field. This is consistent with the recent kinematic models proposed for the Caucasus-Kura-South Caspian region and brings a new insight into the present geodynamics of Armenia.
ISSN: 1040-6182

hal-01307342
https://hal.archives-ouvertes.fr/hal-01307342
DOI : 10.1016/j.quaint.2015.05.021