Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimental modelling applied to the study of orogenic wedge dynamics has been a subject of fruitful research for more than 30 years, although the technique dates back as far as the early XIXth century. On one hand, several first order parameters controlling the structural evolution of mountain belts have been intensively investigated using the classic tectonic "sandbox" models. The main parameters are the properties of the basal décollement, the deforming material, the backstop, and fluxes, kinematics and surface processes. On the other hand, the morphological evolution of a mountain relief subjected to changing tectonic or climatic forcing has been addressed using another kind of approach called "geomorphic" models. Nowadays, the literature is extremely rich, particularly for the sandbox technique, so that it becomes difficult to have an exhaustive view of the effects of the above parameters on mountain evolution. In this article, we propose a detailed review of the main results obtained using both "tectonic" and "geomorphic" approaches. Our goal is to provide an almost complete state-of-the-art in the experimental study of relief dynamics to guide present and future researchers in their understanding of mountain belt evolution.
ISSN: 0040-1951

hal-00757713
https://hal.archives-ouvertes.fr/hal-00757713
DOI : 10.1016/j.tecto.2012.01.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
An exploration 3D seismic data set from the Gjallar Ridge off mid-Norway images a giant fluid seep structure 3 × 5 km wide, which connects to late Palaeocene magmatic sills at depth. Two of the pipes that have developed as hydrothermal vents reach all the way to the modern seafloor implying that they either were active much longer than the original hydrothermal activity or have been reactivated. We combine detailed seismic analysis of the northern pipe and sandbox modeling to constrain pipe initiation and propagation. Although both the seismic data and the sandbox models suggest that fluids at depth are focused through a vertical conduit, sandbox models show that fluids ascend and reach a critical depth migration where focused migration abruptly transforms into distributed fluid flow through unconsolidated sediments. This indicates that at this level the sediments are intensely deformed during pipe propagation, creating a V-shaped structure, i.e. an inverted cone at depth and a positive relief anomaly, 5 to 10 m high, at the seafloor, which is clearly identified on 3D seismic data. Comparison of the geometries observed in sandbox modeling with the seismically observed geometries of the Giant Gjallar Vent suggests that the Giant Gjallar Vent may be a proto-fluid seep at an early stage of its development, preceding the future collapse of the structure forming a seafloor depression. Our results imply that the Gjallar Giant Vent can be used as a window into the geological processes active in the deep parts of the Vøring Basin.
ISSN: 0025-3227

hal-00772465
https://hal.archives-ouvertes.fr/hal-00772465
DOI : 10.1016/j.margeo.2012.08.010

Éditeur(s) : HAL CCSD
Résumé : In Taiwan , the subduction of the Chinese continental margin under the Luzon arc results in the progressive growth of an active orogenic wedge. It is one of the best places to study the complex relationships that occurs between the tectonic processes controlling deformation (plate rheology and kinematics, metamorphism and magmatism) and surface processes (erosion and sedimentation). In order to study the kinematics of the present day convergence of Philippine Sea plate to the Asian continent around Taiwan, we perform 2D and 3D sandbox modeling and we analyzed the models with PIV (Particle Image Velocimetry) software. In 2D experiments, a model Coulomb wedge is submitted to erosion and sedimentation under topography and flux steady state conditions. The 3D experiments are mainly used to study the escape tectonics occurring in the middle west and southwest Taiwan. A wedge shaped indenter and a basement relief were used to simulate the mechanical plate boundary between Philippine Sea plate and Eurasia plate and the basement topography to the west of Taiwan respectively. We examine the exhumation patterns, the mode of fault propagation and displacement patterns by strain partitioning of vertical vs. horizontal displacement and convergent parallel vs. orogen parallel components. The preliminary conclusions are: 1. The interactions between tectonics, erosion and sedimentation control geometry and kinematics of the doubly vergent transpressional orogen. 2. Exhumation processes are controlled by the balance between erosion, frontal accretion and underplating in different structural domains of the wedge. 3. Retrowedge erosion favorites backfolding and backthrusting, induces flower structures and fan shaped cleavage distribution. 4. Sedimentation promotes underplating and out-of sequences thrusting. 5. Continental subduction or subduction of topographic highs will enhance underthrusting/underplating, thick-skin tectonics and inversion of sedimentary basin.
Bolletino di Geofisica teorica ed applicata

hal-00411133
https://hal.archives-ouvertes.fr/hal-00411133

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox modeling is used to study the deformation of accretionary wedges caused by the subduction of oceanic ridges. The first experiment incorporates a massive ridge within a sand wedge. The wedge thickens and shortens when the forward propagation of the basal decollement ceases. The wedge thickening results in taper change, reactivation of preexisting thrusts, and retreat of the frontal part of the sand wedge. Similar mechanisms may have affected some margins that have undergone ridge subduction such as the Tonga margin after the subduction of the oblique Louisville oceanic ridge. The second experiment shows the effects of an active basement thrust slice as it enters a subduction zone. This process may have happened in the eastern Nankai accretionary wedge. Initially, the wedge in this experiment behaved similarly to that of the first experiment. Rapidly the topographic slope changed, the wedge thickened above the basement slice generating a slope break in the topography; a deeper propagating accretionary wedge again characterized by a small taper developed. These results, when compared with observations made in the Eastern Nankai Trench, are in agreement with the past subduction of a basement thrust slice in this area.
ISSN: 0278-7407

hal-01261549
https://hal.archives-ouvertes.fr/hal-01261549
https://hal.archives-ouvertes.fr/hal-01261549/document
https://hal.archives-ouvertes.fr/hal-01261549/file/Lallemand_et_al-1992-Tectonics.pdf
DOI : 10.1029/92TC00637

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Based on observations from both modem convergent margins and sandbox modeling, we examine the possible conditions favoring frontal accretion and/or frontal and basal tectonic erosion. Mean characteristic parameters (!.t, !.t* • and [) are used to discuss the mechanical stability of 28 transects across the frontal part of convergent margins where the Coulomb theory is applicable. Natural observations reveal that "typical accretionary wedges" are characterized by low tapers with smooth surface slope and subducting plate, low convergence rates and thick trench sediment, while "nonaccretionary wedges" display large tapers with irregular surface slopes and rough subducting plate, high convergence rates and almost no trench fill. Sandbox experiments were performed to illustrate the effects of seamounts/ridges in the subduction zone on the deformation of an accretionary wedge. These experiments show that a wedge of sand is first trapped and pushed in front of the seamount which acts as a moving bulldozer. This is followed by a tunnelling effect of the subducting seamount through the frontal wedge material, which results in considerable sand reworking. At an advanced subduction stage, the d6collement jumps back from a high level in the wedge to its former basal position. We conclude that a high trench sedimentation rate relative to the convergence rate leads to frontal accretion. In contrast, several conditions may favor tectonic erosion of the upper plate. First, oceanic features, such as grabens, seamounts or ridges, may trap upper plate material during their subduction process. Second, destabilization of the upper plate material by internal fluid overpressuring causing hydrofracturing is probably another important mechanism.
ISSN: 0148-0227

hal-01261600
https://hal.archives-ouvertes.fr/hal-01261600
https://hal.archives-ouvertes.fr/hal-01261600/document
https://hal.archives-ouvertes.fr/hal-01261600/file/lallemandJGR1994.pdf

Éditeur(s) : HAL CCSD Universidad de Oviedo
Résumé : In recent years attention has been paid to the major role of surface processes on the evolu- tion of mountain belts on different time scales. In this study, sandbox experiments are used to better characterize the complex interactions between surface processes and tectonics. Models results are then applied to better analyze deformation and kinematics of recent active or ancient orogens (case studies are chosen in the Taiwan belt, the Alps and the Hercynian belt).
ISSN: 0474-9588

hal-00853761
https://hal.archives-ouvertes.fr/hal-00853761

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The structure and dynamic evolution of a mountain belt piedmont are controlled by strong interactions between tectonics, surface processes (erosion, sedimentation), and climate. Studying these couplings relies on detailed geometric and kinematic analysis of morphostructural markers (folds, faults, terraces, alluvial surfaces) and analysis of syntectonic sedimentation. To study quantitatively how these markers form, evolve and record deformation, we developed a new analogue modelling approach using a specific composite granular material. The originality stands in the simultaneous modelling of orogenic deformation mechanisms and erosion-transport-sedimentation processes, but also in the use of techniques allowing quantitative measurement of morphostructural evolution. This methodology opens new perspectives in the fields of geomorphology (relief dynamics), seismotectonics (study of active faults), and sedimentology (including sequential stratigraphy).
ISSN: 0010-7999

hal-00411972
https://hal.archives-ouvertes.fr/hal-00411972
DOI : 10.1016/j.crte.2008.01.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analog sandbox models have been set up to study the impact of syntectonic erosion on thrust wedges with one and two decollement levels. Different accretion mechanisms are activated depending on interactions between surface processes and wedge mechanics: frontal accretion, backthrusting, underthrusting and underplating due to decollement induced duplex formation at depth. These mechanisms may function simultaneously, being located at different parts across the wedge. For all the experiments, a high friction is imposed at the base of models and the volume of eroded material remains equal to the volume of newly accreted material, maintaining a constant surface slope during the shortening. Erosion limits the forward propagation of thrust wedges and favors the underthrusting of basal layers allowing duplex formation. Erosion promotes development of major backthrusts in the thrust wedges without or with one decollement, but no backthrusts was formed in the wedges with two decollements. Slow erosion allows lower extent of basal underthrusting in comparison with regular-rate erosion. Variations in the erosion taper lead to changes in duplex geometry and exhumation rate in thrust wedges with one or two decollements. The 6 degrees erosion taper promotes formation of antiformal stack at the rear part of thrust wedge, high rate of basal underthrusting and high extent of erosional removal. The cover layers are nearly completely eroded above the antiformal stack and form the synformal klippe in frontal part of thrust wedges. The 8 degrees erosion taper allows development of individual ramp-anticlines and active forward thrusting of cover layers above the decollement and low rate of basal underplating below it, with consequent low extent of erosional removal. The results of our experiments support the observations on structural evolution and erosion in the Alberta Foothills of the Canadian Rockies.
ISSN: 0040-1951

hal-00617769
https://hal.archives-ouvertes.fr/hal-00617769
DOI : 10.1016/j.tecto.2011.01.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The investigation of deformation rates on a mountain piedmont can provide key information for improving our understanding of the overall dynamics of a mountain range. Here, we estimate the shortening rate absorbed by a Quaternary emergent detachment fold on the southeastern piedmont of the Tianshan (China). Our work is primarily based on new 10Be cosmogenic exposure dating of deformed alluvial surfaces. The method we have developed combines depth profiling with sampling of surface cobbles, thereby allowing exposure time, erosion rate and inheritance to be simultaneously constrained. The exposure ages of the uppermost uplifted alluvial surfaces are around 140±17 ka140±17 ka, 130±9 ka130±9 ka and 47±9 ka47±9 ka, from west to east. A terrace lying below the 140 ka surface is dated at 65±5 ka65±5 ka. The ages of the uplifted and folded alluvial surfaces were then combined with estimates of shortening obtained using two distinct methods: (1) the excess area method, where sedimentation rates, extracted from magnetostratigraphic studies, are used to determine the amount of sedimentation after the abandonment of the river; and (2) a folding model derived from sandbox experiments. The late Pleistocene shortening rates are shown to be between 0.4±0.1 mm/yr0.4±0.1 mm/yr and 0.8±0.5 mm/yr0.8±0.5 mm/yr on the western part of the fold and 2.1±0.4 mm/yr2.1±0.4 mm/yr along its central part. The central part of the frontal Yakeng anticline therefore accommodates up to 25% of the total shortening currently absorbed across the whole Eastern Tianshan range (8 mm/yr). However, this situation seems to have prevailed for only the last 150 ka, as the shortening rate absorbed by this nascent fold was previously ten times slower. While the initiation of folding of the Yakeng anticline can be traced back to 5.5 Ma ago, the basinward migration of the active deformation front onto the Yakeng fold is a relatively recent phenomenon and appears to be diachronous from west to east, probably in relation to the tectonic activity of the folds in the hinterland.
ISSN: 0012-821X

hal-01306997
https://hal.archives-ouvertes.fr/hal-01306997
DOI : 10.1016/j.epsl.2015.11.041

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox experiments, using a two-dimensional and a three-dimensional approach, are used to study the deformation of margins in response to seamount subduction. Successive mechanisms of deformation are activated during the subduction of conical seamounts. First, reactivation of the frontal thrusts and compaction of the accretionary wedge is observed. Then, back thrusting and, conjugate strike-slip faulting develops above the leading slope of the subducted seamount. The basal d6collement is deflected upward in the wake of the subducting high, and a large shadow zone develops behind the seamount trailing slope. Consequently, frontal accretion is inhibited and part of the frontal margin is dragged into the subduction zone. When the main d6collement returns to its basal level in the wake of the seamount, the margin records a rapid subsidence and a new accretionary wedge develops, closing the margin reentrant. The sediments underthrusted in the wake of the seamount into the shadow zone, are underplated beneath the rear part of the accretionary wedge. Substantial shortening and thickening of the deformable seaward termination of the upper plate basement, associated with basal erosion is observed. Seamount subduction induces significant material transfer within the accretionary wedge, favors large tectonic erosion of the frontal margin and thickening of the rear part of the margin. The subduction and underplating of relatively undeformed, water-ladden sediments, associated with fluid expulsion along the fractures affecting the margin could modify the fluid pressure along the basal ddcollement. Consequently, significant variations of the effective basal friction and local mechanical coupling between the two plates could be expected around the subducting seamount.
ISSN: 0278-7407

hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523/document
https://hal.archives-ouvertes.fr/hal-01261523/file/Dominguez2000-Tectonics.pdf
DOI : 10.1029/1999TC900055

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We analyze the kinematics of fault tip folding at the front of a fold-and-thrust wedge using a sandbox experiment. The analog model consists of sand layers intercalated with low-friction glass bead layers, deposited in a glass-sided experimental device and with a total thickness h = 4.8 cm. A computerized mobile backstop induces progressive horizontal shortening of the sand layers and therefore thrust fault propagation. Active deformation at the tip of the forward propagating basal décollement is monitored along the cross section with a high-resolution CCD camera, and the displacement field between pairs of images is measured from the optical flow technique. In the early stage, when cumulative shortening is less than about h/10, slip along the décollement tapers gradually to zero and the displacement gradient is absorbed by distributed deformation of the overlying medium. In this stage of detachment tip folding, horizontal displacements decrease linearly with distance toward the foreland. Vertical displacements reflect a nearly symmetrical mode of folding, with displacements varying linearly between relatively well defined axial surfaces. When the cumulative slip on the décollement exceeds about h/10, deformation tends to localize on a few discrete shear bands at the front of the system, until shortening exceeds h/8 and deformation gets fully localized on a single emergent frontal ramp. The fault geometry subsequently evolves to a sigmoid shape and the hanging wall deforms by simple shear as it overthrusts the flat ramp system. As long as strain localization is not fully established, the sand layers experience a combination of thickening and horizontal shortening, which induces gradual limb rotation. The observed kinematics can be reduced to simple analytical expressions that can be used to restore fault tip folds, relate finite deformation to incremental folding, and derive shortening rates from deformed geomorphic markers or growth strata.
ISSN: 2169-9313

hal-00138061
https://hal.archives-ouvertes.fr/hal-00138061
https://hal.archives-ouvertes.fr/hal-00138061/document
https://hal.archives-ouvertes.fr/hal-00138061/file/Bernard_et_al-2007-Journalsur Geophysical_Research__Solid_Earth_%281978-2012%29.pdf
DOI : 10.1029/2005JB004149