Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Subduction of a narrow slab of oceanic lithosphere beneath a tightly curved orogenic arc requires the presence of at least one lithospheric scale tear fault. While the Calabrian subduction beneath southern Italy is considered to be the type example of this geodynamic setting, the geometry, kinematics and surface expression of the associated lateral, slab tear fault offshore eastern Sicily remain controversial. Results from a new marine geophysical survey conducted in the Ionian Sea, using high-resolution bathymetry and seismic profiling reveal active faulting at the seafloor within a 140 km long, two-branched fault system near Alfeo Seamount. The previously unidentified 60 km long NW trending North Alfeo Fault system shows primarily strike-slip kinematics as indicated by the morphology and steep-dipping transpressional and transtensional faults. Available earthquake focal mechanisms indicate dextral strike-slip motion along this fault segment. The 80 km long SSE trending South Alfeo fault system is expressed by one or two steeply dipping normal faults, bounding the western side of a 500+ m thick, 5 km wide, elongate, syntectonic Plio-Quaternary sedimentary basin. Both branches of the fault system are mechanically capable of generating magnitude 6–7 earthquakes like those that struck eastern Sicily in 1169, 1542, and 1693.
ISSN: 0278-7407

insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887/document
https://hal-insu.archives-ouvertes.fr/insu-01256887/file/GutscherEtal_2015_Tectonics.pdf
DOI : 10.1002/2015TC003898

Éditeur(s) : HAL CCSD University of Arizona
Résumé : International audience
Taiwan is a young and seismically active mountain belt, where a series of strong earthquakes (M>7) have occurred over the past hundred years. Identifying historical earthquakes around Taiwan is a key to better constrain the geodynamic of this active region. Sedimentological and geochemical analyses of surface sediments from one station offshore east Taiwan revealed the presence of coarse-grained layers interpreted as turbidites. The age of these layers have been determined by 210Pb, 137Cs, and 241Am chronology. Dating of the three most recent turbidites provides ages of AD 2001±3, AD 1950±5, and AD 1928±10. The results show striking temporal correspondence of turbidite layers to large (M≥6.8) earthquakes recorded in the region since the 20th century. The chronologies of sediment layers lead us to believe that turbidites resulted from the 2003 Taitung earthquake (M 6.8), the 1951 Chengkong earthquake (M 7.1), and the 1935 Lutao earthquake (M 7.0), respectively. Such a good correlation between turbidites and high-magnitude (M≥6.8) historical and instrumental seismic events suggests that turbidite paleoseismology constitutes a valuable tool for earthquake assessment in the eastern Taiwan margin. Moreover, the modern reservoir radiocarbon age and the regional marine reservoir correction (ΔR) of the Kuroshio Current off Taiwan were estimated by comparing accelerator mass spectrometry (AMS) 14C ages with ages derived from corrected 210Pb profiles and historical accounts of identifiable seismic events. Such a determination is important to calibrate the 14C ages of marine materials for accurate comparison of marine and continental geological records. Our calculated mean ΔR value of 232±54 14C yr (n=2) is higher than its modern value of 86±40 14C yr. This high value can be explained by the presence of local upwelling cells and turbulence in the Kuroshio Current, north of Green Island. These upwelling cells bring 14C-depleted water to the surface, resulting in an increase of the modern ΔR value in this portion of the Kuroshio Current.
ISSN: 0033-8222

hal-01306986
https://hal.archives-ouvertes.fr/hal-01306986
DOI : 10.1017/RDC.2015.3

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimental modelling applied to the study of orogenic wedge dynamics has been a subject of fruitful research for more than 30 years, although the technique dates back as far as the early XIXth century. On one hand, several first order parameters controlling the structural evolution of mountain belts have been intensively investigated using the classic tectonic "sandbox" models. The main parameters are the properties of the basal décollement, the deforming material, the backstop, and fluxes, kinematics and surface processes. On the other hand, the morphological evolution of a mountain relief subjected to changing tectonic or climatic forcing has been addressed using another kind of approach called "geomorphic" models. Nowadays, the literature is extremely rich, particularly for the sandbox technique, so that it becomes difficult to have an exhaustive view of the effects of the above parameters on mountain evolution. In this article, we propose a detailed review of the main results obtained using both "tectonic" and "geomorphic" approaches. Our goal is to provide an almost complete state-of-the-art in the experimental study of relief dynamics to guide present and future researchers in their understanding of mountain belt evolution.
ISSN: 0040-1951

hal-00757713
https://hal.archives-ouvertes.fr/hal-00757713
DOI : 10.1016/j.tecto.2012.01.027

Éditeur(s) : HAL CCSD Bureau de recherches géologiques et minières
Résumé : Des modèles intégrateurs
ISSN: 0292-8477

hal-00795448
https://hal.archives-ouvertes.fr/hal-00795448

Éditeur(s) : HAL CCSD
Résumé : National audience
Les flux sédimentaires dans les bassins d'avant-pays dépendent de l'activité érosive des rivières qui drainent en amont les chaînes de montagnes. Les variations du flux sédimentaire sont généralement attribuées à des variations de l'activité érosive en réponse à la tectonique ou aux changements climatiques. À l'aide d'un dispositif expérimental nous étudions les interactions entre la déformation, la pluviométrie et le comportement intrinsèque d'un système géomorphologique que constitue un prisme orogénique soumis à l'érosion. Nous montrons que le réseau de drainage dans un tel prisme évolue toujours depuis un réseau dominé par des drains longitudinaux (parallèles aux structures tectoniques) vers un réseau dominé par des drains transversaux. Au cours de cette réorganisation, les captures de drains longitudinaux par les drains transversaux provoquent des modifications des pentes locales et des flux d'eau. Ces captures entraînent une augmentation subite de la vitesse d'érosion des drains transversaux provoquant celle-là même du flux de sédiment à la sortie du prisme (figure 1), alors que la vitesse de raccourcissement et la pluviométrie sont restées constantes. L'analyse de systèmes naturels montre que cette réorganisation progressive du système de drainage semble être une conséquence inéluctable de la croissance des chaînes de montagnes (Babault et al 2012). On doit par conséquent s'attendre à ce que le flux sédimentaire dans les chaînes soit contrôlé, non seulement par la tectonique et/ou le climat, mais aussi par la dynamique du réseau de drainage.
14 ème congrès français de sédimentologie, Paris, 4-8 novembre 2013, livre des résumés. Publication ASF
Paris, France

insu-00913436
https://hal-insu.archives-ouvertes.fr/insu-00913436

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use a strike-slip fault analog model to study experimentally the role played by along-fault non-uniform and asymmetric applied normal stress on both coseismic slip and long-term fault behavior. Our model is based on a visco-elasto-plastic multi-layered rheology that allows to produce several hundreds of scaled analog microquakes and associated seismic cycles. Uniform or heterogeneous applied normal stress along the fault plane is imposed and maintained constant during the whole experiment durations. Our results suggest that coseismic slip patterns are strongly controlled by spatial normal stress variations and subsequent accumulated shear stress along fault strike. Major microquakes occur preferentially in zones of major shear stress asperities. Coseismic slip distributions exhibit a pattern similar to the along-fault applied normal stress distribution. The occurrence of isolated low to moderate microquakes where residual stresses persist around secondary stress asperities, indicates that stress conditions along the fault also control the whole variability of fault slip events. Moreover, when fault slip stability conditions are modulated by normal stress distribution, our experiments suggest that the along-fault stress heterogeneity influences the seismic cycle regularity and, consequently, long-term fault slip behavior. Uniform applied normal stress favors irregular seismic cycles and the occurrence of earthquakes clustering, whereas non-uniform normal stress with a single high amplitude stress asperity generates strong characteristic microquake events with stable return periods. Together our results strengthen the assumption that coseismic slip distribution and earthquake variability along an active fault may provide relevant information on long term tectonic stress and could thus improve seismic hazard assessment.
ISSN: 0012-821X

hal-01666379
https://hal.archives-ouvertes.fr/hal-01666379
DOI : 10.1016/j.epsl.2017.10.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz lies astride the complex plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. We report on the results of recent bathymetric swathmapping and multi-channel seismic surveys carried out here. The seafloor is marked by contrasting morphological provinces, spanning the SW Iberian and NW Moroccan continental margins, abyssal plains and an elongate, arcuate, accretionary wedge. A wide variety of tectonic and gravitational processes appear to have shaped these structures. Active compressional deformation of the wedge is suggested by folding and thrusting of the frontal sedimentary layers as well as basal duplexing in deeper internal units. There is evidence for simultaneous gravitational spreading occurring upslope. The very shallow mean surface and basal slopes of the accretionary wedge (1° each) indicate a very weak decollement layer, geometrically similar to the Mediterranean Ridge accretionary complex. Locally steep slopes (up to 10°) indicate strongly focused, active deformation and potential gravitational instabilities. The unusual surface morphology of the upper accretionary wedge includes “raft-tectonics” type fissures and abundant sub-circular depressions. Dissolution and/or diapiric processes are proposed to be involved in the formation of these depressions.
ISSN: 0264-8172

insu-00401683
https://hal-insu.archives-ouvertes.fr/insu-00401683
DOI : 10.1016/j.marpetgeo.2007.11.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The growth of relief in active tectonic areas is mainly controlled by the interactions between tectonics and surface processes (erosion and sedimentation). The study of long-lived morphologic markers formed by these interactions can help in quantifying the competing effects of tectonics, erosion and sedimentation. In regions experiencing active extension, river-long profiles and faceted spurs (triangular facets) can help in un- derstanding the development of mountainous topography along normal fault scarps. In this study, we devel- oped analogue experiments that simulate the morphologic evolution of a mountain range bounded by a normal fault. This paper focuses on the effect of the fault slip rate on the morphologic evolution of the foot- wall by performing three analogue experiments with different fault slip rates under a constant rainfall rate. A morphometric analysis of the modelled catchments allows comparing with a natural case (Tunka half- graben, Siberia). After a certain amount of fault slip, the modelled footwall topographies of our models reaches a dynamic equilibrium (i.e., erosion balances tectonic uplift relative to the base level) close to the fault, whereas the topography farther from the fault is still being dissected due to regressive erosion. We show that the rates of vertical erosion in the area where dynamic equilibrium is reached and the rate of re- gressive erosion are linearly correlated with the fault throw rate. Facet morphology seems to depend on the fault slip rate except for the fastest experiment where faceted spurs are degraded due to mass wasting. A stream-power law is computed for the area wherein rivers reach a topographic equilibrium. We show that the erosional capacity of the system depends on the fault slip rate. Finally, our results demonstrate the pos- sibility of preserving convex river-long profiles on the long-term under steady external (tectonic uplift and rainfall) conditions.
ISSN: 0040-1951

hal-00646966
https://hal.archives-ouvertes.fr/hal-00646966
https://hal.archives-ouvertes.fr/hal-00646966/document
https://hal.archives-ouvertes.fr/hal-00646966/file/preprint_Strak_2011.pdf
DOI : 10.1016/j.tecto.2011.10.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The modern high topography of the Tianshan resulted from the reactivation of a Paleozoic orogenic belt by the India/Asia collision. Today, the range exhibits tectonically active forelands and intermontane basins. Based on quantitative morphotectonic observations and age constraints derived from cosmogenic 10Be dating, single-grain post-infrared infrared stimulated luminescence (p-IR IRSL) dating and modeling of fault scarp degradation, we quantify the deformation in the Nalati and Bayanbulak intermontane basins in the central Eastern Tianshan. Our results indicate that at least 1.4 mm/yr of horizontal crustal shortening is accommodated within these two basins. This shortening represents over 15% of the 8.5 ± 0.5 mm/yr total shortening rate across the entire range at this longitude. This shortening rate implies that the Eastern Central Tianshan is thickening at a mean rate of ∼1.4 mm/yr, a rate that is significantly higher than the average denudation rate of 0.14 mm/yr derived from our cosmogenic analysis. This discrepancy suggests that the Tianshan range has not yet reached a steady-state topography and remains in a transient state of topographic growth, most likely due to limited denudation rates driven by the arid climate of Central Asia.
ISSN: 0012-821X

insu-01610154
https://hal-insu.archives-ouvertes.fr/insu-01610154
DOI : 10.1016/j.epsl.2017.09.025

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Detailed seafloor mapping in the area east of Taiwan revealed trench-parallel stretching and folding of the Ryukyu forearc and lateral motion of the accretionary wedge under oblique convergence. East of 122ø40'E, a steep accretionary wedge is elongated in an E-W direction. A major transcurrent right-lateral strike-slip fault accommodates the strain partitioning caused by an oblique convergence of 40 ø. A spectacular out-of-sequence thrust may be related to the subduction of a structural high lying in the axis of the N-S trending Gagua Ridge. This asperity is likely responsible for the uplift of the accretionary wedge and forearc basement and may have augmented strain partitioning by increasing the coupling between the two plates. West of 122ø40'E, the low-taper accretionary wedge is sheared in a direction subparallel to the convergence vector with respect to the Ryukyu Arc. The bayonet shape of the southern Ryukyu Arc slope partly results from the recent (re)opening of the southern Okinawa Trough at a rate of about 2 to 4 cm/yr. Right-lateral shearing of the sedimentary forearc with respect to the nonlinear Ryukyu backstop generates trench-parallel extension in the forearc sediment sequence at dilational jogs and trench-parallel folding at compressive jogs. The Hoping Basin lies above a diffuse trench/trench/fault (TTF) or TFF unstable triple junction moving toward the south along a N-S transform zone which accommodates the southward drift of the Ryukyu Arc with respect to Eurasia.
ISSN: 0278-7407

hal-01261555
https://hal.archives-ouvertes.fr/hal-01261555
https://hal.archives-ouvertes.fr/hal-01261555/document
https://hal.archives-ouvertes.fr/hal-01261555/file/Lallemand_et_al-1999-Tectonics.pdf
DOI : 10.1029/1998TC900011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mass balances are often used to calculate sediment fluxes in foreland basins and denudation rates in adjacent mountain ranges on intermediate to long timescales (from a few tens of thousand to a million years). Here, we study the simple Quaternary catchment-alluvial fan system of the Kuitun River, in northern Tian Shan, to discuss some ideas about sediment storage, release, and bypass in relatively short (100 km long) sediment routing systems. This study shows that the Kuitun catchment and piedmont areas clearly present evidence of a significant and temporary storage of sediments during the Pleistocene. These sediments were then excavated and delivered farther into the foreland basin during the Holocene. The difference between the volumes of materials released from the catchment and piedmont areas (5.5 ± 1.7 km3) and the volume stored in a contemporaneous fan downstream (2.6 ± 0.6 km3) indicates that the latter did not trap the whole sediment load transported by the river. The alluvial fan was bypassed by 27 to 78% of this load toward its distal alluvial plain. If this value is well estimated, it implies a major volumetric partitioning of the deposits between the fan and the alluvial plain, with a very high sedimentation rate in the fan (1.97 ± 0.52 mm*y− 1) and a much lower one downstream (0.11 ± 0.11 mm*y− 1). However, this volumetric partitioning might only occur during periods with a very specific hydrological regime such as the Holocene deglaciation. Eventually, the peculiar sediment storage and release pattern within the Kuitun catchment and piedmont areas during the Pleistocene and Holocene complicates the calculation of mean paleodenudation rates using either sediment budgets or in situ produced cosmogenic nuclides.
ISSN: 0169-555X

insu-00985283
https://hal-insu.archives-ouvertes.fr/insu-00985283
https://hal-insu.archives-ouvertes.fr/insu-00985283/document
https://hal-insu.archives-ouvertes.fr/insu-00985283/file/jolivet-et_al-2014_HAL.pdf
DOI : 10.1016/j.geomorph.2014.01.024

Éditeur(s) : HAL CCSD Geological Society
Résumé : International audience
Deformation mechanisms, long-term kinematics and evolution of fold and thrust belts subjected to erosion are studied through 2D analogue experiments involving large convergence. First-order parameters tested include (1) décollements and/or plastic layers interbedded at different locations within analogue materials and (2) synconvergence surface erosion. Weak layers, depending on their location in the model, favour deformation partitioning characterized by the simultaneous development of underplating domains in the inner part of the wedge (basal accretion) and frontal accretion where the wedge grows forward. Interaction between tectonics and surface processes influences this behaviour. Development of antiformal thrust stacks controlled by underplating shows small- and large-scale cyclicity. Thin plastic layers induce folding processes, which are studied at wedge scale. Recumbent and overturned folds, with large inverted limbs, develop in a shear-induced asymmetric deformation regime via progressive unrolling of synclinal hinges. Surface erosion and underplating at depth induce further rotation (passive tilting) and horizontalization of fold limbs. Model results give insights to discuss the mechanisms responsible for the large-scale structures (i.e. antiformal nappe stacks, klippen and kilometre-scale recumbent fold-nappes) encountered in several mountain belts such as the Montagne Noire (French Massif Central), the Galicia Variscan belt (Spain) and the northern Apennines (Italy).
ISSN: 0016-7649

hal-00937644
https://hal.archives-ouvertes.fr/hal-00937644
DOI : 10.1144/jgs2013-012

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
Earth deformation is a multi-scale process ranging from seconds (seismic deformation) to millions of years (tectonic deformation). Bridging short- and long-term deformation and developing seismotectonic models has been a challenge in experimental tectonics for more than a century. Since the formulation of Reid's elastic rebound theory 100 years ago, laboratory mechanical models combining frictional and elastic elements have been used to study the dynamics of earthquakes. In the last decade, with the advent of high-resolution monitoring techniques and new rock analogue materials, laboratory earthquake experiments have evolved from simple spring-slider models to scaled analogue models. This evolution was accomplished by advances in seismology and geodesy along with relatively frequent occurrences of large earthquakes in the past decade. This coincidence has significantly increased the quality and quantity of relevant observations in nature and triggered a new understanding of earthquake dynamics. We review here the developments in analogue earthquake modelling with a focus on those seismotectonic scale models that are directly comparable to observational data on short to long timescales. We lay out the basics of analogue modelling, namely scaling, materials and monitoring, as applied in seismotectonic modelling. An overview of applications highlights the contributions of analogue earthquake models in bridging timescales of observations including earthquake statistics, rupture dynamics, ground motion, and seismic-cycle deformation up to seismotectonic evolution.
ISSN: 1869-9510

hal-01553120
https://hal.archives-ouvertes.fr/hal-01553120
https://hal.archives-ouvertes.fr/hal-01553120/document
https://hal.archives-ouvertes.fr/hal-01553120/file/rosenau2017.pdf
DOI : 10.5194/se-8-597-2017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Orogenic wedges locally present chaotic tectonostratigraphic units that contain exotic blocks of various size, origin, age and lithology, embedded in a sedimentary matrix. The occurrence of ophiolitic blocks, sometimes huge, in such “mélanges” raises questions on (i) the mechanisms responsible for the incorporation of oceanic basement rocks into an accretionary wedge and (ii) the mechanisms allowing exhumation and redeposition of these exotic elements in “mélanges” during wedge growth.To address these questions, we present the results of a series of analogue experiments performed to characterize the processes and parameters responsible for accretion, exhumation and tectonosedimentary reworking of oceanic basement lithospheric fragments in an accretionary wedge.The experimental setup is designed to simulate the interaction between tectonics, erosion and sedimentation. Different configurations are applied to study the impact of various parameters, such as irregular oceanic floor due to structural inheritance, or the presence of layers with contrasted rheology that can affect deformation partitioning in the wedge (frontal accretion vs basal accretion) influencing its growth. Image correlation technique allows extracting instantaneous velocity field, and tracking of passive particles. By retrieving the particle paths determined from models, the pressure-temperature path of mélange units or elementary blocks can be discussed. The experimental results are then compared with observations from ophiolite-bearing mélanges in Taiwan (Lichi and Kenting mélanges) and Raman spectroscopy of carbonaceous material (RSCM) Thermometry data on rocks from the northern Apennines (Casanova mélange). A geological scenario is proposed following basic observations. The tectonic evolution of the retroside of doubly vergent accretionary wedges is mainly controlled by backthrusting and backfolding. The retro wedge is characterized by steep slopes that are prone to gravitational instabilities. It triggers submarine landslides inducing huge mass transfers. This erosion combined with backthrusting could favour exhumation of the ophiolitic fragments formerly accreted at the base of the wedge along the rough seafloor-sediments interface. Such an exhumed material can be reworked and deposited as debris- flows in proximal basins located at the foot of the retrowedge slope forming a tectono-sedimentary mélange. These syntectonic basins are continuously deformed and involved in prograding backthrusting-induced deformation.
ISSN: 0264-3707

hal-01395127
https://hal.archives-ouvertes.fr/hal-01395127
DOI : 10.1016/j.jog.2016.05.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Zandjan province is situated in the NW of Iran, at the junction between the southern termination of the Tabriz right-lateral strike-slip fault and the western end of the Alborz active mountain range. Despite this key location, in terms of active tectonics, there is no destructive earthquake reported in available historical seismicity catalogues. Even if a few low magnitude instrumental earthquakes have been recorded indicating that this area is actively deforming, the Zandjan region can be considered as a seismic gap. Based on detailed field investigations, digital elevation models (DEMs), satellite image and aerial photo interpretations, we have identified a major active fault network affecting this regions. It is mainly constituted by several west and est verging thrust faults, trending NW-SE to N-S, that clearly cut Late Quaternary to Holocene deposits. Evidences in the morphology indicate also that they accommodate some right-lateral slip component. This fault network can be divided into four major fault zones affecting Zandjan city (present day population over 500,000) and part of the Zandjan-Mianeh basin more to the west. Based on fault geometrical characteristics (fault length, segmentation ... ) and kinematics, the Zandjan fault system is certainly capable to produce moderate to large earthquakes (Mw = 6.5-7.0) and serious damages in the Zandjan city and surrounding areas. The study of these faults is, then, of major interest for seismic hazard assessment in Zandjan province where total population exceed 1.5 million but also to better understand present day geodynamic of NW Iran.
ISSN: 0040-1951

hal-00617526
https://hal.archives-ouvertes.fr/hal-00617526
DOI : 10.1016/j.tecto.2011.04.012

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Nowadays, technological advances in satellite imagery measurements as well as the development of dense geodetic and seismologic networks allow for a detailed analysis of surface deformation associated with active fault seismic cycle. However, the study of earthquake dynamics faces several limiting factors related to the difficulty to access the deep source of earthquake and to integrate the characteristic time scales of deformation processes that extend from seconds to thousands of years. To overcome part of these limitations and better constrain the role and couplings between kinematic and mechanical parameters, we have developed a new experimental approach allowing for the simulation of strike-slip fault earthquakes and analyze in detail hundreds of successive seismic cycle. Model rheology is made of multilayered visco-elasto-plastic analog materials to account for the mechanical behavior of the upper and lower crust and to allow simulating brittle/ductile coupling, postseismic deformation phase and far-field stress transfers. The kinematic evolution of the model surface is monitored using an optical system, based on subpixel spectral correlation of high-resolution digital images. First, results show that the model succeed in reproducing the deformation mechanisms and surface kinematics associated to the main phases of the seismic cycle indicating that model scaling is satisfactory. These results are comforted by using numerical algorithms to study the strain and stress distribution at the surface and at depth, along the fault plane. Our analog modeling approach appears, then, as an efficient complementary approach to investigate earthquake dynamics.
ISSN: 0278-7407

hal-01174176
https://hal.archives-ouvertes.fr/hal-01174176
DOI : 10.1002/2014TC003701

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We have discovered in a marine core, located 20 km east of the Coastal Range of Taiwan at the top of a 1200 m deep submarine high, sheltered from rivers discharges and gravitational flows, a 23 cm-thick anomalous sequence topped with broken bivalves and wood fragments. Based on radiocarbon dating, we distinguish five sub-events within ∼ 100 yrs, about 3000 years ago. The oldest four sub-events are interpreted as the record of local submarine landslides, likely triggered by clustered earthquakes that are common in this tectonically active area. The last event including shells and wood has a different origin. Despite the high level of climatic and tectonic recent activity, no comparable event has been observed at the same site since that time, making it unique during the last 3.75 ka. Hydrodynamical modeling stimulated with a set of submarine landslide-triggered tsunami sources and combined with the regional oceanic circulation dominated by the Kuroshio Current, allow us to better constrain the transport paths of the suspended material, the expected run-up at the coast, and ultimately the trigger and source that best fit our observations. The Kuroshio Current appears as a strong constraint that generally prevents cross-shore transport of suspended material even during a major tsunami. Since the largest aerial debris flow observed along the east coast of Taiwan during the last 4 ka was synchronous with the marine deposit, our preferred scenario starts with the occurrence of four distinct large earthquakes within less than a century, triggering both submarine and aerial landslides in the study area. Then, a giant typhoon reworked the nearshore material as well as the slided material stored upstream resulting in a debris flow. It deeply modified the surface current, allowing the wood debris and shells to fastly reach the core site.
ISSN: 0040-1951

hal-01467640
https://hal.archives-ouvertes.fr/hal-01467640
DOI : 10.1016/j.tecto.2015.11.001

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The structure and dynamic evolution of a mountain belt piedmont are controlled by strong interactions between tectonics, surface processes (erosion, sedimentation), and climate. Studying these couplings relies on detailed geometric and kinematic analysis of morphostructural markers (folds, faults, terraces, alluvial surfaces) and analysis of syntectonic sedimentation. To study quantitatively how these markers form, evolve and record deformation, we developed a new analogue modelling approach using a specific composite granular material. The originality stands in the simultaneous modelling of orogenic deformation mechanisms and erosion-transport-sedimentation processes, but also in the use of techniques allowing quantitative measurement of morphostructural evolution. This methodology opens new perspectives in the fields of geomorphology (relief dynamics), seismotectonics (study of active faults), and sedimentology (including sequential stratigraphy).
ISSN: 0010-7999

hal-00411972
https://hal.archives-ouvertes.fr/hal-00411972
DOI : 10.1016/j.crte.2008.01.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In fold and thrust belts drainage organization and patterns of sedimentation depend conceptually on the ability or not for preexisting reaches to incise uplifting thrust sheets. In this study we investigate experimentally the dynamics of drainage network in a wedge submitted to shortening and erosion. It allows us to reproduce and to monitor the interactions between tectonics, erosion and sedimentation during the development of up to five successive thrust sheets. In the experiments channels adjust to uplift rate by both increasing their slope and narrowing their channels as it is observed in nature. The series of experiments shows that the proportion of persistent preexisting transverse channels increases with the ratio of rainfall over shortening rates. The experiments confirm the view that the competition between discharge and tectonic uplift controls along-strike variations in sediment flux in sedimentary basins by controlling the drainage organization. If the transverse channels draining a wedge are not diverted, a line-source dispersal system develops in front of the active structure. If channels are diverted in the backlimb of the frontal structure it results in point-sourced depositional systems separated by areas fed only by small channels developing in the front of the wedge. Fans accumulated in front of the active structures reveal two stages of sedimentation, one of progradation, while the frontal structure is active and a second one of valley backfilling and thrust sealing during internal deformation of the wedge. The experiments also suggest that spatial variations in rock uplift rate along a thrust front may be evidenced by minimum-discharge variations of persistent transverse channels.
ISSN: 0040-1951

insu-01252482
https://hal-insu.archives-ouvertes.fr/insu-01252482
DOI : 10.1016/j.tecto.2015.09.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gibraltar arc, spans a complex portion of the Africa-Eurasia plate boundary marked by slow oblique convergence and intermediate and deep focus seismicity. The seemingly contradictory observations of a young extensional marine basin surrounded by an arcuate fold-and-thrust belt, have led to competing geodynamic models (delamination and subduction). Geophysical data acquired in the past decade provide a test for these models and support a narrow east-dipping, subduction zone. Seismic refraction studies indicate oceanic crust below the western Gulf of Cadiz. Tomography of the upper mantle reveals a steep, east-dipping high P-wave velocity body, beneath Gibraltar. The anisotropic mantle fabric from SKS splitting shows arc-parallel "fast directions", consistent with toroidal flow around a narrow, westward retreating subducting slab. The accompanying WSW advance of the Rif-Betic mountain belt has constructed a thick pile of deformed sediments, an accretionary wedge, characterized by west-vergent thrust anticlines. Bathymetric swath‐mapping images an asymmetric embayment at the deformation front where a 2 km high basement ridge has collided. Subduction has slowed significantly since 5 Ma, but deformation of recent sediments and abundant mud volcanoes suggest ongoing activity in the accretionary wedge. Three possible origins for this deformation are discussed; gravitational spreading, overall NW-SE convergence between Africa and Iberia and finally a WSW tectonic push from slow, but ongoing roll-back subduction. In the absence of arc volcanism and shallow dipping thrust type earthquakes, evidence in favor of present-day subduction can only be indirect and remains the object of debate. Continued activity of the subduction offers a possible explanation for great (M > 8.5) earthquakes known to affect the area, like the famous 1755 Great Lisbon earthquake. Recent GPS studies show SW motion of stations in N Morocco at velocities of 3-6 mm/yr indicating the presence of an independent block, a "Rif-Betic-Alboran" microplate, situated between Iberia and Africa.
ISSN: 0040-1951

insu-00769762
https://hal-insu.archives-ouvertes.fr/insu-00769762
DOI : 10.1016/j.tecto.2012.08.038