Éditeur(s) : Gauthier-Villars
Résumé : We report here our findings on the chemistry of methane, manganese and chloride dissolved in the interstitial water of the Barbados accretionary complex. The decollement separating the subduction plate from the accretionary wedge is geochemically characterized by high methane and manganese and low chloride concentrations relative to buried seawater. Sandstone layers occurring below the decollement and the compressive structures recording some of the earliest effects of offscraping are also characterized by similar anomalies. A fluid with the same characteristics is also found six kilometres to the east of the deformation front within the oceanic plate. High manganese concentration and low chlorinity also occur in the pore water of the offscraped sediment packages, but without associated anomalous methane concentrations. These results suggest that: Dewatering processes occur below the decollement in association with thermogenic methane production; Fluid with low chlorinity and high methane concentrations circulates mainly along the decollement, its propagation in the oceanic domain and along the main fracture zones being associated with these detachment surfaces; Diagenetic processes essentially control the dissolved manganese concentration and probably affect the methane content of the interstitial waters; The observations made in this paper illustrate advective processes in the front of an accretionary prism.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1991 , Vol. 14 , N. 1 , P. 33-49

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00101/21262/18873.pdf
http://archimer.ifremer.fr/doc/00101/21262/

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
The activity of subhorizontal decollements mapped by geologists in extensional provinces is not explained by rock mechanics principles, which predict that only steep faults can slip. These exposed decollements are therefore suspected to be inactive; they may correspond to rotated, formerly active, high-angle faults. However, growing seismological evidence of earthquakes with low-angle fault-plane mechanisms has forced us to revisit this viewpoint. Using the example of the Gulf of Corinth in Greece, we propose a mechanical model that explains how a weak, high-angle fault may form a low-angle decollement at depth. This decollement is uplifted in a second stage of extension, which allows the exhumation of a metamorphic core complex such as the northern Snake Range, Nevada.
ISSN: 0091-7613

hal-01419920
https://hal.archives-ouvertes.fr/hal-01419920
DOI : 10.1130/0091-7613(2001)029<0439:CCMFTG>2.0

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analog sandbox models have been set up to study the impact of syntectonic erosion on thrust wedges with one and two decollement levels. Different accretion mechanisms are activated depending on interactions between surface processes and wedge mechanics: frontal accretion, backthrusting, underthrusting and underplating due to decollement induced duplex formation at depth. These mechanisms may function simultaneously, being located at different parts across the wedge. For all the experiments, a high friction is imposed at the base of models and the volume of eroded material remains equal to the volume of newly accreted material, maintaining a constant surface slope during the shortening. Erosion limits the forward propagation of thrust wedges and favors the underthrusting of basal layers allowing duplex formation. Erosion promotes development of major backthrusts in the thrust wedges without or with one decollement, but no backthrusts was formed in the wedges with two decollements. Slow erosion allows lower extent of basal underthrusting in comparison with regular-rate erosion. Variations in the erosion taper lead to changes in duplex geometry and exhumation rate in thrust wedges with one or two decollements. The 6 degrees erosion taper promotes formation of antiformal stack at the rear part of thrust wedge, high rate of basal underthrusting and high extent of erosional removal. The cover layers are nearly completely eroded above the antiformal stack and form the synformal klippe in frontal part of thrust wedges. The 8 degrees erosion taper allows development of individual ramp-anticlines and active forward thrusting of cover layers above the decollement and low rate of basal underplating below it, with consequent low extent of erosional removal. The results of our experiments support the observations on structural evolution and erosion in the Alberta Foothills of the Canadian Rockies.
ISSN: 0040-1951

hal-00617769
https://hal.archives-ouvertes.fr/hal-00617769
DOI : 10.1016/j.tecto.2011.01.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz lies astride the complex plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. We report on the results of recent bathymetric swathmapping and multi-channel seismic surveys carried out here. The seafloor is marked by contrasting morphological provinces, spanning the SW Iberian and NW Moroccan continental margins, abyssal plains and an elongate, arcuate, accretionary wedge. A wide variety of tectonic and gravitational processes appear to have shaped these structures. Active compressional deformation of the wedge is suggested by folding and thrusting of the frontal sedimentary layers as well as basal duplexing in deeper internal units. There is evidence for simultaneous gravitational spreading occurring upslope. The very shallow mean surface and basal slopes of the accretionary wedge (1° each) indicate a very weak decollement layer, geometrically similar to the Mediterranean Ridge accretionary complex. Locally steep slopes (up to 10°) indicate strongly focused, active deformation and potential gravitational instabilities. The unusual surface morphology of the upper accretionary wedge includes “raft-tectonics” type fissures and abundant sub-circular depressions. Dissolution and/or diapiric processes are proposed to be involved in the formation of these depressions.
ISSN: 0264-8172

insu-00401683
https://hal-insu.archives-ouvertes.fr/insu-00401683
DOI : 10.1016/j.marpetgeo.2007.11.008

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox modeling is used to study the deformation of accretionary wedges caused by the subduction of oceanic ridges. The first experiment incorporates a massive ridge within a sand wedge. The wedge thickens and shortens when the forward propagation of the basal decollement ceases. The wedge thickening results in taper change, reactivation of preexisting thrusts, and retreat of the frontal part of the sand wedge. Similar mechanisms may have affected some margins that have undergone ridge subduction such as the Tonga margin after the subduction of the oblique Louisville oceanic ridge. The second experiment shows the effects of an active basement thrust slice as it enters a subduction zone. This process may have happened in the eastern Nankai accretionary wedge. Initially, the wedge in this experiment behaved similarly to that of the first experiment. Rapidly the topographic slope changed, the wedge thickened above the basement slice generating a slope break in the topography; a deeper propagating accretionary wedge again characterized by a small taper developed. These results, when compared with observations made in the Eastern Nankai Trench, are in agreement with the past subduction of a basement thrust slice in this area.
ISSN: 0278-7407

hal-01261549
https://hal.archives-ouvertes.fr/hal-01261549
https://hal.archives-ouvertes.fr/hal-01261549/document
https://hal.archives-ouvertes.fr/hal-01261549/file/Lallemand_et_al-1992-Tectonics.pdf
DOI : 10.1029/92TC00637

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimental modelling applied to the study of orogenic wedge dynamics has been a subject of fruitful research for more than 30 years, although the technique dates back as far as the early XIXth century. On one hand, several first order parameters controlling the structural evolution of mountain belts have been intensively investigated using the classic tectonic "sandbox" models. The main parameters are the properties of the basal décollement, the deforming material, the backstop, and fluxes, kinematics and surface processes. On the other hand, the morphological evolution of a mountain relief subjected to changing tectonic or climatic forcing has been addressed using another kind of approach called "geomorphic" models. Nowadays, the literature is extremely rich, particularly for the sandbox technique, so that it becomes difficult to have an exhaustive view of the effects of the above parameters on mountain evolution. In this article, we propose a detailed review of the main results obtained using both "tectonic" and "geomorphic" approaches. Our goal is to provide an almost complete state-of-the-art in the experimental study of relief dynamics to guide present and future researchers in their understanding of mountain belt evolution.
ISSN: 0040-1951

hal-00757713
https://hal.archives-ouvertes.fr/hal-00757713
DOI : 10.1016/j.tecto.2012.01.027

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We analyze the kinematics of fault tip folding at the front of a fold-and-thrust wedge using a sandbox experiment. The analog model consists of sand layers intercalated with low-friction glass bead layers, deposited in a glass-sided experimental device and with a total thickness h = 4.8 cm. A computerized mobile backstop induces progressive horizontal shortening of the sand layers and therefore thrust fault propagation. Active deformation at the tip of the forward propagating basal décollement is monitored along the cross section with a high-resolution CCD camera, and the displacement field between pairs of images is measured from the optical flow technique. In the early stage, when cumulative shortening is less than about h/10, slip along the décollement tapers gradually to zero and the displacement gradient is absorbed by distributed deformation of the overlying medium. In this stage of detachment tip folding, horizontal displacements decrease linearly with distance toward the foreland. Vertical displacements reflect a nearly symmetrical mode of folding, with displacements varying linearly between relatively well defined axial surfaces. When the cumulative slip on the décollement exceeds about h/10, deformation tends to localize on a few discrete shear bands at the front of the system, until shortening exceeds h/8 and deformation gets fully localized on a single emergent frontal ramp. The fault geometry subsequently evolves to a sigmoid shape and the hanging wall deforms by simple shear as it overthrusts the flat ramp system. As long as strain localization is not fully established, the sand layers experience a combination of thickening and horizontal shortening, which induces gradual limb rotation. The observed kinematics can be reduced to simple analytical expressions that can be used to restore fault tip folds, relate finite deformation to incremental folding, and derive shortening rates from deformed geomorphic markers or growth strata.
ISSN: 2169-9313

hal-00138061
https://hal.archives-ouvertes.fr/hal-00138061
https://hal.archives-ouvertes.fr/hal-00138061/document
https://hal.archives-ouvertes.fr/hal-00138061/file/Bernard_et_al-2007-Journalsur Geophysical_Research__Solid_Earth_%281978-2012%29.pdf
DOI : 10.1029/2005JB004149

Éditeur(s) : HAL CCSD
Résumé : International audience
The Jaca basin is a thrust-sheet top basin transported southward andunderlain by basement and cover thrusts separated by a Triassic décollement.Basin-fill upper Cretaceous to lower Oligocene synorogenic sequencesrecord a southward depocenter migration, while growth stratadate a shift of deformation from the mid-Eocene in the N to the earlyMiocene in the S (S-Pyrenean front). However, the deep geometry andkinematic relationships between the cover and basement thrusts remainnon-consensual. We present a new structural and kinematic interpretationfor the eastern Jaca basin, based on subsurface structural maps andcross-sections constructed using industrial seismic reflection profiles.Raman Spectroscopy of Carbonaceous Material (RSCM), vitrinite reflectanceand apatite fission track (AFT) thermochronology data givefurther constraints for the restoration of the deformation and burialexhumationsequence. We define 3 main basement thrusts under thenorthern part of the basin, from N to S the Broto, Fiscal and Guargathrusts. The study also clarifies the deep structure of the cover thrustsand their links with these basement thrusts and those located more tothe north in the Axial Zone (AZ), which altogether define the timing ofthe basement thrust sequence as follows : the Lakoura-Eaux Chaudesthrust system (northern AZ) active up to the end Bartonian, the Gavarnie(central AZ) and Broto thrusts during the Priabonian-Rupelian andthe Fiscal and Guarga thrusts during the late Oligocene-early Miocene.AFT results in the basin fill and AZ date the exhumation of the basinto the late Oligocene-early Miocene, in relation to the Fiscal-Guargathrusting. AFT partial reset argues for a maximum burial < 6 km forthe base of the Eocene detrital sequence (Hecho Group turbidites). Bycontrast, RSCM and vitrinite thermometry at the same level indicatesTmax around 180°C, locally up to 240°C, attesting to a temperature anomalypossibly related to transient fluid circulation.
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080836
https://hal-insu.archives-ouvertes.fr/insu-01080836

Éditeur(s) : HAL CCSD
Résumé : National audience
La Zone Nord-Pyrénéenne (ZNP) résulte de l’inversion debassins albo-cénomaniens ouverts entre les plaques Europe etIbérie. Le manteau subcontinental a été exhumé dans le fond decertains de ces bassins et la couverture sédimentaire mésozoïquepré-rift, désolidarisée du soubassement paléozoïque, est venue localementen contact tectonique avec les péridotites. Ceci faitde la ZNP un analogue pour l’étude des marges continentalespassives à manteau exhumé. L’extension crustale s’est produiteen régime thermique chaud comme le montre le métamorphismecrétacé des sédiments pré-rift. Les Chaînons Béarnais (PyrénéesOccidentales) représentent un témoin peu inversé de ce type demarge chaude et sont donc propices à l’étude des modalités del’amincissement crustal dans un tel système. Les analyses detempératures par spectrométrie Raman réalisées sur la couverturesédimentaire aux abords du manteau (Saraillé, Urdach, Turon dela Técouère), montrent que la totalité du système a été soumis àdes températures maximales variant de 253C à 482C. Le contacttectonique majeur entre les sédiments pré-rift décollés et lemanteau est une zone d’intense circulation de fluides avec formationde roches métasomatiques à talc+chlorite+pyrite dans lesconditions du faciès schistes verts. La géochimie isotopique (O, C,Sr) et les inclusions fluides triphasées montrent une circulation desaumures chaudes (~200C), à travers toute la couverture sédimentairedans les derniers stades de l’exhumation du manteau.Nous montrons pour la première fois que pendant l’exhumationdes péridotites : (1) les sédiments pré-rift ont subi un amincissementsyn-métamorphique avec génèse d’une foliation S0/S1 et,(2) le socle paléozoïque a été réduit à de fines lentilles tectoniquesdéformées ductilement et restées adhérentes au manteau. Ainsi, larhéologie de la croûte supérieure durant l’amincissement est contrôléeen grande partie par la présence d’une couverture sédimentairepré- et syn-rift épaisse décollée jouant le rôle d’un couverclethermique efficace. Ces nouvelles données mettent en avant le caractèrede marge passive distale chaude de la ZNP. Cela constitueun élément important pour la compréhension des mécanismes del’amincissement crustal en contexte d’exhumation du manteau etses conséquences comme héritage structural lors de l’inversion tectoniquedes bassins.
RST 2016, livre des résumés
Caen, France

insu-01387892
https://hal-insu.archives-ouvertes.fr/insu-01387892

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Paleozoic-early Mesozoic geology of Tibet was controlled by the rift-drift, seafloor spreading and subduction zone tectonics of a Paleo-Tethyan realm, which evolved between the West Cathaysides (WC) and the East Cimmerides (EC). Different suture zones with ophiolites and ophiolitic mélanges, high-pressure metamorphic belts, magmatic arcs and accretionary prism complexes separating different terranes mark multiple subduction-accretion systems within this Paleo-Tethyan domain, reminiscent of the modern Western Pacific Ocean. Discrete basins separated by different continental blocks and magmatic arcs constituted a complex paleogeography of Paleo-Tethys, and these oceanic strands were closed as a result of subduction with different polarities during the late Paleozoic-Triassic. The Longmu Tso Shuanghu-Changning Menglian Suture zone (LS-CMS) in Tibet represents the main tectonic boundary between the WC and EC that developed in the Devonian. The East Kunlun-A’nyemaqen oceanic slab was subducted northward beneath the East Kunlun terrane in northern Tibet, whereas the Sumdo oceanic slab was subducted northward beneath the South Qiangtang-North Lhasa terrane in southern Tibet. The Longmu Tso Shuanghu-Changning Menglian and Jinshajiang-Ailaoshan-Song Ma ophiolites were developed and emplaced in subduction-accretion systems with opposite polarities (westward and eastward) beneath the North Qiangtang-Qamdo-Simao-Indochina terrane in central Tibet. The Jinshajiang-Ailaoshan-Song Ma oceanic slab was subducted westward beneath the North Qiangtang-Simao-Indochina terrane along the Jinshajiang and Ailaoshan-Song Ma trenches in a trench-ridge-trench triple junction plate configuration. The Emeishan mantle plume produced a large Permian basaltic terrane, developed on the western passive margin of the South China block. The final closure of the Paleo-Tethyan oceanic branches resulted in continental collisions and development of a vast Indosinian orogenic collage in the latest Triassic-Jurassic.
ISSN: 0743-9547

insu-01119604
https://hal-insu.archives-ouvertes.fr/insu-01119604
https://hal-insu.archives-ouvertes.fr/insu-01119604/document
https://hal-insu.archives-ouvertes.fr/insu-01119604/file/Xu-JAES-2015.pdf
DOI : 10.1016/j.jseaes.2015.01.021

Éditeur(s) : HAL CCSD
Résumé : 1 p.
International audience
The 12th May 2008 Wenchuan earthquake in the Longmen Shan occurred on a large thrust fault largely inherited from an Indosinian structure itself probably controlled by an older structural heritage of the South China block continental margin. Within the whole northeast Tibet region, such a structural inheritance has had a major impact on the Tertiary deformation. It appears of primary importance to assess the pre-Tertiary tectonic evolution of the main blocks involved to understand the actual deformation in the eastern edge of Tibet. Over the past decades, the Proterozoic to Cenozoic tectonic, metamorphic and geochronologic history of the Longmen Shan and Songpan Garzê area have been largely studied. We present a synthesis of the tectonic evolution of the Songpan Garzê fold and thrust belt from Triassic to present. The Songpan-Garzê belt was formed during closure of a wide oceanic basin ?lled with a thick (5 to 15 km) sequence of Triassic ?yschoid sediments. Closure of the basin due to Triassic subduction involved strong shortening, intense folding and faulting of the Triassic series. A large-scale décollement, that presently outcrops along the eastern boundary of the belt (Danba area), allowed the growth of a wide and thick accretionary wedge. It develops in the Paleozoic and Triassic series and separates the accretionary prism from an autochthonous crystalline basement which shares many similarities with the basement of the Yangtze Craton (0.7-0.9 Ga). To the north and northwest, below the thickened Triassic series of the belt, the composition (oceanic or continental) of the basement remains unknown. During the Indosinian orogeny the emplacement of orogenic granites (220 - 150 Ma) was associated to crustal thickening. The isotopic composition of granitoids shows that their magma source were predominantly derived from melting of the proterozoic basement with varying degrees of sedimentary material and negligible mantle source contribution. In the Danba area, the décollement outcrops in a large tertiary antiform with a NNW-SSE axis. It has been exhumed too in the hanging wall of the NE-SW faults of the Tertiary Longmen-Shan belt that marks the present day transition from the Tibetan plateau to the Sichuan basin. These faults have episodically absorbed signi?cant shortening since the Late Triassic. The amount and precise timing of post-triassic deformation are dif?cult to constrain especially because of the dif?culty to isolate the tertiary thermochronological signal from the protracted late Triassic - Cretaceous thermal history. Nonetheless it is generally accepted that Jurassic - Cretaceous tectonism did not modi?ed the general Triassic architecture of eastern Tibet contrarily to the Tertiary deformation. The long-term cooling histories obtained on Mesozoic granites and on the metamorphic series of the Danba dome are very similar showing a very slow and regular cooling during Jurassic andCretaceous, con?rming the absence of major tectonic event between c.a. 150 and 30 Ma. Low temperature thermochronology data indicate that ?nal exhumation and cooling occurred in theTertiary with an acceleration between 10 and 5 Ma along the major tectonic structures. Within the Longmen Shan range, a total denudation of 7 to 10 km is estimated for the late Cenozoic period. Similar amounts of late Tertiary denudation have been estimated along an east-west section across the Xianshuihe fault
Asian climate and tectonics seminar
Utrecht, Netherlands

insu-00610298
https://hal-insu.archives-ouvertes.fr/insu-00610298
DOI : 10.1016/j.jseaes.2010.03.008

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Iberian Massif is the best exposed segment of the European Variscan Belt. It includes relatively well preserved terranes that were accreted by transpression along time and resulted in a number of geotectonic units that formed part of the Late Paleozoic assembly of the Pangaea Supercontinent. In SW Iberia, these units are the Central Iberian Zone (CIZ), Ossa Morena Zone (OMZ), and the South Portuguese Zone (SPZ). A 210 km long NE-SW magnetotelluric profile was carried out through the CIZ, from the OMZ-CIZ boundary toward the north, reaching the Tagus (Cenozoic) basin. Data dimensionality analysis resulted in a suitable 2-D electrical resistivity structure, allowing a 2-D inversion of the data set. Complementary available geophysical data (deep seismic, gravity and aeromagnetic) and a comparison with a detailed geological cross section led us to constrain the interpretation of the 2-D electrical resistivity structure of the CIZ crust. The results show, for the upper crust, the existence of diverse conductive/resistive bodies that correlate well with known geological features (sedimentary basins, faults, granitic plutons, mineralized systems). A mild but steady conductive band is located along the middle and lower crust that is interpreted as a mafic granulite basement. The upper section of this band connects with several elongated shallow conductors, providing further evidence for the existence, in the Central Iberian Zone, of a complex decollement system where the major faults are rooted. Such a crustal architecture is viewed as the northward continuation of the Variscan large-scale structures previously recognized in the southern sectors (OMZ and SPZ).
ISSN: 0148-0227

hal-00671036
https://hal.archives-ouvertes.fr/hal-00671036
DOI : 10.1029/2010JB007538

Éditeur(s) : Elsevier Science Bv
Résumé : The rollback of a segmented slab of oceanic lithosphere is typically accompanied by vertical lithospheric tear fault(s) along the lateral slab edge(s) and by strike slip movement in the upper plate, defined as a STEP fault (Subduction Tear Edge Propagator). The Neogene evolution of the Central Mediterranean is dominated by the interaction between the slow Africa–Eurasia convergence and the SE-ward rollback of the Ionian slab, that leads to the back-arc opening of the Tyrrhenian Sea. Here, we present post-stack time migrated and pre-stack depth migrated Archimede (1997) multichannel seismic lines, that were acquired offshore eastern Sicily, at the foot of the Malta escarpment. First, we identify the recent deformation along the lateral ramp of the Calabrian accretionary wedge. Towards the east, the Calabrian wedge is formed by the accretion of the post-evaporitic sediments, above a decollement at the base of the Messinian evaporites. At the latitude of Syracuse, 50 km east of the Malta escarpment, a major N150°E trending crustal scale and vertical fault slices through the entire accretionary wedge. This fault cuts by several kilometers, through the pre-evaporitic Messinian sediments and into the basement. The vertical offset along this vertical fault decreases from north to south, and the fault is no longer observed on the seismic lines, 50 km SE of the Alfeo seamount. A previously published Moho depth isocontour map, offshore Sicily and the recent GPS data, combined with the presence of strike slip movements NE onshore Sicily, allow us to identify this 200 km long crustal-scale fault as the surface expression of a STEP fault. The presence of syntectonic Pleistocene sediments on top this crustal-scale fault suggests a recent lithospheric vertical movement of the STEP fault, in response to the rollback of the Ionian slab and to the SE-ward advance of the Calabria-Peloritan block
Tectonophysics (0040-1951) (Elsevier Science Bv), 2013-08 , Vol. 602 , P. 141-152

Droits : 2013 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00118/22878/21386.pdf
DOI:10.1016/j.tecto.2012.12.026
http://archimer.ifremer.fr/doc/00118/22878/

Éditeur(s) : Elsevier Science Bv
Résumé : We present the results from a new grid of deep penetration multichannel seismic (MCS) profiles over the 280-km-long north-central segment of the Lesser Antilles subduction zone. The 14 dip-lines and 7 strike-lines image the topographical variations of (i) the subduction interplate décollement, (ii) the top of the arcward subducting Atlantic oceanic crust (TOC) under the huge accretionary wedge up to 7 km thick, and (iii) the trenchward dipping basement of the deeply buried forearc backstop of the Caribbean upper plate. The four northernmost long dip-lines of this new MCS grid reveal several-kilometres-high topographic variations of the TOC beneath the accretionary wedge offshore Guadeloupe and Antigua islands. They are located in the prolongation of those mapped on the Atlantic seafloor entering subduction, such as the Barracuda Ridge. This MCS grid also provides unexpected evidences on huge along-strike topographical variation of the backstop basement and of the deformation style affecting the outer forearc crust and sediments. Their mapping clearly indicates two principal areas of active deformation in the prolongation of the major Barracuda and Tiburon ridges and also other forearc basement highs that correspond to the prolongation of smaller oceanic basement highs recently mapped on the Atlantic seafloor. Although different in detail, the two main deforming forearc domains share similarities in style. The imaged deformation of the sedimentary stratification reveals a time- and space-dependent faulting by successive warping and unwarping, which deformation can be readily attributed to the forearc backstop sweeping over the two obliquely-oriented elongated and localized topographical ridges. The induced faulting producing vertical scarps in this transport does not require a regional arc-parallel extensional regime as proposed for the inner forearc domain, and may support a partitioned tectonic deformation such as in the case of an outer forearc sliver. A contrasted reflectivity of the sedimentary layering at the transition between the outer forearc and accretionary domains was resolved and used to define the seaward edge of the outer forearc basement interpreted as being possibly a proxy to the updip limit of the interplate seismogenic zone. Its mapping documents along-arc variations of some tens of kilometres the subduction backstop with respect to the negative gravity anomaly commonly taken as marking the subduction trench. With the exception of the southernmost part, the newly mapped updip limit reaches 25 km closer to the trench, thus indicating a possible wider seismogenic zone over almost the whole length of the study area.
Tectonophysics (0040-1951) (Elsevier Science Bv), 2013-09 , Vol. 603 , P. 32-54

Droits : 2013 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/00139/25003/23109.pdf
DOI:10.1016/j.tecto.2013.05.028
http://archimer.ifremer.fr/doc/00139/25003/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The eastern margin of the Tibetan Plateau is a key region to understand the formation and tectonic evolution of the plateau. Most studies concentrated on the Longmen Shan range that corresponds to the tectonically very active boundary between the Tibetan Plateau and the Sichuan Basin. This work addresses the deformation and exhumation pattern in the poorly understood metamorphic Danba dome situated at the conjunction between the southern Longmen Shan range and the major strike-slip Xian Shui He fault. The Early Mesozoic and Cenozoic evolution of the dome are then compared to the regional evolution of eastern Tibet. The about 830 Ma zircon U–Pb ages obtained on the Gezong and Gongcai gneiss as well as U–Pb ages on inherited zircons in the Early Mesozoic granites confirm the occurrence of Neo-Proterozoic magmatic episodes in the Danba basement at 800–900 Ma and 650–750 Ma. Following the closure of the Palaeotethys Ocean, granitoids were emplaced in the Danba metamorphic basement and Triassic cover from about 230 Ma to about 170 Ma. The western part of the Lian He Kau granitic massif, emplaced (between 210 and 200 Ma) within the Triassic cover sequence of the dome was only slightly affected by the Early Mesozoic deformation. However, in the eastern, deeper level compartment of the massif, ductile deformation occurred between 200 and 190 Ma, contemporaneous with the onset of the Barrovian-type metamorphism dated at 200–180 Ma. That deformation is compatible with the Early Mesozoic deformation observed in the Longmen Shan range and with the development of the large-scale décollement level in the Songpan Garzê area. Apatite fission track data then indicate that, following the Oligocene–Middle Eocene onset of eastward motion of the Songpan Garzê terrane, the Danba dome developed as a crustal-scale antiform during the Late Miocene–Early Pliocene (10–4 Ma). The exhumation was controlled by the Lian He Kau fault (a major transpressive structure parallel to the Xian Shui He fault) and the associated Manai thrust faults. Regionally, while the Oligocene–Middle Miocene exhumation phase seems to have been of regional extent, the Late Miocene to Present day phase is localised along the Longmen Shan range thrusts as well as along the back-thrusts formed by the Lian He Kau, Manai and associated faults.
ISSN: 0743-9547

insu-01117657
https://hal-insu.archives-ouvertes.fr/insu-01117657
DOI : 10.1016/j.jseaes.2015.02.009

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
In south China the Lushan massif forms a topographic high of the South China Block south of the Qinling-Dabie belt. The Lushan massif consists of two main lithotectonic units separated by a major tectonic contact: a Neoproterozoic (upper Sinian)-Paleozoic unit comprising primarily unmetamorphosed sandstones overlies a Paleoproterozoic unit mainly composed of low-pressure, high-temperature gneisses and micaschists. Both units are cut by Cretaceous granitic intrusions. Three primary tectono-metamorphic and magmatic events are recognized. The eastern part of the Lushan massif is cut by a NNE-SSW trending ductile normal fault (D3 deformation) coeval to the emplacement of a 100-110 Ma leucogranite dated by 40Ar/39Ar laserprobe on biotite and muscovite. D2 deformation is responsible for the formation of a decakilometer-scale NE-SW trending upright anticline characterized by NE-SW stretching and NW-SE shortening. The age of this folding event is defined by a 127±1 (2σ) Ma U/Pb titanite date obtained for a syntectonic granodiorite and 40Ar/39Ar ages of 133 Ma for amphibole. This Cretaceous age also corresponds to the 40Ar/39Ar ages of 126 Ma found on syntectonic muscovites at the base of the Sinian unit. An older deformation event, D1, characterized by a top-to-the-NW extensional decollement of the Sinian-Paleozoic series above Proterozoic metamorphic rocks is related to the Triassic tectonics of the Dabieshan. Lastly, in the lower part of Sinian rocks, the occurrence of kyanite cataclased during D1 documents an older, poorly preserved, late Paleozoic-early Mesozoic tectonometamorphic event (Dx) related to a blind thrust in the continental crust of the South China Block in the southern foreland of the Dabieshan.
ISSN: 0278-7407

insu-00717721
https://hal-insu.archives-ouvertes.fr/insu-00717721
https://hal-insu.archives-ouvertes.fr/insu-00717721/document
https://hal-insu.archives-ouvertes.fr/insu-00717721/file/Lin-Tectonics-2000.pdf
DOI : 10.1029/2000TC900009

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We present Contact Dynamics discrete element simulations of the earthquake-triggered Jiufengershan avalanche, which mobilized a 60 m thick, 1.5 km long sedimentary layer, dipping similar to 22 degrees SE toward a valley. The dynamic behavior of the avalanche is simulated under different assumptions about rock behavior, water table height, and boundary shear strength. Additionally, seismic shaking is introduced using strong motion records from nearby stations. We assume that seismic shaking generates shearing and frictional heating along the surface of rupture, which, in turn, may induce dynamic weakening and avalanche triggering; a simple "slip-weakening'' criterion was adopted to simulate shear strength drop along the rupture surface. We investigate the mechanical processes occurring during triggering and propagation of an avalanche mobilizing shallowly dipping layers. Incipient deformation forms a pop-up structure at the toe of the dip slope. As the avalanche propagates, the pop-up deforms into an overturned fold, which overrides the surface of separation along a decollement. Simultaneously, uphill layers slide at high velocity (125 km/h) and are folded and disrupted as they reach the toe of the dip slope. The avalanche foot forms a wedge that is pushed forward as deformed rocks accrete at its rear. We simulated five cross sections across the Jiufengershan avalanche, which differ in the geometry of the surface of separation. Topographic and simulated surface profiles are similar. The friction coefficient at the surface of separation determined from back analysis is abnormally low (mu(SS) = 0.2), possibly due to lubrication by liquefied soils. The granular deposits of simulated earthquake- and rain-triggered avalanches are similar.
ISSN: 0148-0227

hal-00420882
https://hal.archives-ouvertes.fr/hal-00420882
DOI : 10.1029/2008JF001075

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The western margin of the Gulf of Mexico (Veracruz State, Mexico) displays an extensive Neogene gravitational system, whereby the Neogene siliciclastic sediments are detached from underlying Mesozoic carbonates along decollement surface in Oligocene underpressured clays. Rapidly subsiding half-grabens develop above the footwall associated with major listric faults, whereas mini-basins develop in the deepest parts of the slope, in conjunction with the growth of west-verging compressional features. Between the high-angle normal faults in the west and the thrust anticlines in the east, a wide roll-over structure has grown progressively, resulting in a major topographic break in the morphology of the slope profile. Coupled forward kinematic modelling (Thrustpack) and stratigraphic modelling (Dionisos), calibrated against seismic profiles and two key nearshore wells, have been applied to representative regional transects across the margin, in order to quantify the vertical (subsidence) and horizontal (gravitational) deformations, and to discuss the impact of various key parameters on the distribution of debris flow depositions. These simulations are compared with data from distant ODP wells and discussed in the scope of current exploration strategies in both the US and Mexican portions of the Gulf of Mexico basin.
ISSN: 0040-1951

hal-00424595
https://hal.archives-ouvertes.fr/hal-00424595
DOI : 10.1016/j.tecto.2008.06.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017