Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cerro del Almirez massif (Nevado–Filábride Complex, Betic Cordillera, SE Spain) is composed of antigorite (Atg-) serpentinite and chlorite (Chl-) harzburgite separated by a thin reaction front formed in a palaeo-subduction setting. These ultramafic rocks preserve unique prograde structures related to the pre- and peak high-pressure event (1.6–1.9 GPa and 680–710 °C). The oldest subduction-related structures are preserved in Atg-serpentinites: a penetrative S1 foliation and associated L1 stretching lineation that formed in a non-coaxial regime with a top-to-the-W sense of shear. This planar–linear fabric is crosscut by olivine ± Ti-clinohumite veins, formed during the prograde breakdown of brucite and pre-metamorphic clinopyroxene, which form a system of veins decimetres long. They record embrittlement processes due to the release of 6 vol.% of H2O associated with brucite dehydration. The growth of prograde olivine and/or tremolite porphyroblasts is syn- to post-kinematic in relation to the S1 foliation. Further reactions at higher temperature related to the complete breakdown of the Atg (i.e. Atg-out) are post-kinematic to S1. Prograde Chl-harzburgite is crosscut by sets of conjugate zones associated with grain-size reduction of olivine grains. These grain-size reduction zones are interpreted as brittle structures generated by hydrofracturing due to overpressure fluids in a compressional setting at low-differential stresses.Structures related to the exhumation process are mainly preserved in the metasedimentary host rock, where an S2/L2 planar–linear fabric developed within a shear zone dominated by a non-coaxial regime with a top-to-the-W sense of movement in a transpressional regime. Peak metamorphic conditions deduced for the schists are similar in pressure (1.3–1.9 GPa) but lower in temperature (560–590 °C) compared to the ultramafic rocks in contact with them, suggesting a major shear zone at the base of the ultramafic massif during D2 deformation in a right-handed transpressional regime.
ISSN: 0040-1951

hal-01172303
https://hal.archives-ouvertes.fr/hal-01172303
DOI : 10.1016/j.tecto.2014.12.022

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Mélange rocks outcrop widely in the central and western frontal sectors of the Betic Cordillera, as in many other collisional orogens where they form part of the accretionary wedges. Extrusion of Triassic plastic clays and evaporites was favored by the progressive accretion of the Betic External Zones, mixing rocks of different provenance and forming a synorogenic frontal mélange unit. MT data coupled with gravity data are a valid combined methodology to characterize the geometry of these mélange units, since the characterization of plastic rocks geometry is usually uncertain using seismic techniques. The results correlate well with known geological features (sedimentary basins, calcareous ranges, evaporitic rocks) and reveal the deep geometry. A resistive body, slightly dipping toward the SE, points to the continuity of the Iberian Massif below the Guadalquivir basin (2°) and the External Zones (6-8°). To the south, gravity models show the Iberian continental crust subducting below the Internal Zones with a roughly 20-35° slope. The main conductive bodies are related to the location of evaporitic rocks involved in the frontal mélange. They overlie the Iberian Massif and, southwards, the frontal Jurassic and Cretaceous limestone sequences of the External and Median Subbetics. In this setting, thick plastic rock units placed above the foreland could act as a lubricant facilitating continental subduction, and being progressively accreted toward a frontal mélange.
ISSN: 1525-2027

hal-00750364
https://hal.archives-ouvertes.fr/hal-00750364
DOI : 10.1029/2012GC004153

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The nucleation, propagation, and associated folding of ramp-flat-ramp normal faults were analyzed from field examples developed in a brittle/ductile multilayer sequence of the Huércal-Overa Basin (SE Spain). Gently dipping sandy silt layers, which display a low cohesive strength (C0 = 7 kPa, μ = 34°), favor the development of extensional detachments. A tectonic origin instead of a possible gravitational origin is supported by the perpendicularity between the paleoslope direction of the fluvial-deltaic environment inferred from imbricated pebbles, and the senses of movement deduced from fault slicken-lines. The link between high-angle normal faults (HANFs) --formed at different levels in the layered sequence-- with horizontal fault segments comes to develop ramp-flat-ramp normal faults with associated roll-over in the hanging wall. Observed extensional duplexes are formed by parallel detachments connected through synthetic Riedel faults. These Riedel faults would produce the back-rotation of the individual blocks (horses), i.e., extensional folding of the originally subhorizontal layers. There is no correlation between the analyzed ramp-flat-ramp normal faults, accommodating south-southeastward extension during Serravallian-lower Tortonian, and either the regional Alpujarride/Nevado-Filabride west-directed extensional shear zone or the top-to-the-north detachments within Alpujarride units, which are clearly sealed by Serravallian-lower Tortonian sediments. Therefore, the studied normal faults are restricted to the brittle/ductile multilayer fluvio/deltaic sequence and accommodate moderate late extension instead of belonging to a large crustal extensional system connected with a regional detachment at depth. Therefore, the basin formed in a moderate crustal thickness context where small and medium-scale extensional systems were subordinate structures. These natural examples support the development of low-angle normal faults at very shallow crustal levels in multilayer sequences with suitable rheological conditions.
ISSN: 0278-7407

hal-00750352
https://hal.archives-ouvertes.fr/hal-00750352
DOI : 10.1029/2012TC003130

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Iberian Massif is the best exposed segment of the European Variscan Belt. It includes relatively well preserved terranes that were accreted by transpression along time and resulted in a number of geotectonic units that formed part of the Late Paleozoic assembly of the Pangaea Supercontinent. In SW Iberia, these units are the Central Iberian Zone (CIZ), Ossa Morena Zone (OMZ), and the South Portuguese Zone (SPZ). A 210 km long NE-SW magnetotelluric profile was carried out through the CIZ, from the OMZ-CIZ boundary toward the north, reaching the Tagus (Cenozoic) basin. Data dimensionality analysis resulted in a suitable 2-D electrical resistivity structure, allowing a 2-D inversion of the data set. Complementary available geophysical data (deep seismic, gravity and aeromagnetic) and a comparison with a detailed geological cross section led us to constrain the interpretation of the 2-D electrical resistivity structure of the CIZ crust. The results show, for the upper crust, the existence of diverse conductive/resistive bodies that correlate well with known geological features (sedimentary basins, faults, granitic plutons, mineralized systems). A mild but steady conductive band is located along the middle and lower crust that is interpreted as a mafic granulite basement. The upper section of this band connects with several elongated shallow conductors, providing further evidence for the existence, in the Central Iberian Zone, of a complex decollement system where the major faults are rooted. Such a crustal architecture is viewed as the northward continuation of the Variscan large-scale structures previously recognized in the southern sectors (OMZ and SPZ).
ISSN: 0148-0227

hal-00671036
https://hal.archives-ouvertes.fr/hal-00671036
DOI : 10.1029/2010JB007538

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Before attaining the mantle wedge, where they trigger partial melting, volatiles released from dehydration reactions in the slab have to migrate across a relatively cold (<750 degrees C), peridotite-layer above the incoming slab. In order to unravel the mechanisms allowing for this initial stage of fluid transport, we performed a detailed field and microstructural study of metamorphic prograde peridotites in the Cerro del Almirez ultramafic massif (Betic Cordillera, Spain), where evidences of one of the most important dehydration reactions in subduction zones, the high-pressure antigorite breakdown (P = 1.6-1.9 GPa and T approximate to 680 degrees C), can be mapped in the field. This reaction led to arborescent growth of centimeter-size olivine and orthopyroxene, producing a chlorite-harzburgite with a spinifex-like texture. Microstructural observations and crystal preferred (CPO) mapping show no evidences of solid-state deformation during the prograde growth of olivine and orthopyroxene at the expenses of antigorite. However, a few tens to a hundred meters away from the reaction front, the metamorphic texture is partially obliterated by grain-size reduction in roughly planar conjugate zones, a few mm to meters wide. Grain size reduction zones (GSRZ) are characterized by (1) sharp contacts with undeformed spinifex-like texture domains, (2) important reduction of the olivine grain size (60-250 mu m), (3) olivine color change from brownish to colorless, (4) decrease in the modal amount of orthopyroxene, and (5) at the mm- to cm-scale, irregular shapes and abrupt terminations. Field and microstructural observations exclude that relative displacement took place across these GSRZ. Changes in modal composition imply reactions with fluids undersaturated in silica. Analysis of olivine crystal-preferred orientations (CPO) in GSRZ shows patterns similar, but more dispersed, than those in neighboring spinifex-like domains. It also reveals mm- to cm-scale discrete domains with rather homogeneous crystallographic orientations suggesting inheritance from the preexisting spinifex-like olivines in the host peridotite. Misorientation angles between neighboring grains in the GSRZ show peaks at similar to 5-10 degrees and similar to 20 degrees, but rotations are not crystallographically controlled. Based on these observations, we rule out the formation of the GSRZ by dynamic recrystallization during dislocation creep and propose that they record brittle deformation (microcraking) of the spinifex-like chlorite-harzburgite, probably induced by hydrofracturing at high pressure and relative low temperature conditions (680-710 degrees C). High-pressure hydrofracturing can, thus, be invoked as an efficient mechanism for fluid flow across the cold top-slab mantle layer, hence allowing the slab-derived fluids to ingress in the wedge.
ISSN: 0012-821X

hal-00534035
https://hal.archives-ouvertes.fr/hal-00534035
DOI : 10.1016/j.epsl.2010.06.029

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
New magnetotelluric and receiver transfer function studies provide insights from the upper to the lower crust of the eastern Betic Cordillera, which is deformed by large folds, normal faults, and a major transcurrent left-lateral fault, the Carboneras Fault Zone (CFZ). Receiver function analysis determines a NNW dipping Moho reaching 20 degrees that increases in depth, from 20 km south of the CFZ up to 34 km in the Sierra de Los Filabres. In addition, seismic discontinuities determined in the upper crust are interpreted as major contacts between metamorphic complexes that are detached and folded. The MT inversion model reveals a conductive zone, also representing a crustal seismic discontinuity, associated with the Alpujarride/Nevado-Filabride contact and fitting the N vergent geometry of the Sierra Alhamilla antiform. A small flexure at Moho coincides with the CFZ, as revealed by the Bouguer anomaly trend, in agreement with the receiver function results. Moreover, the Bahr strike and tipper angle at the stations placed closest to the CFZ clearly reveal the continuity of the CFZ at least down to approximately 15 km in depth, crossing all the detected crustal discontinuities up to the Moho. The lack of a clear Moho offset associated with the Carboneras Fault supports the idea that some large strike-slip faults tend to accommodate the deformation by a broadening fault zone at lower crustal levels. Its nucleation could occur at the base of a thin crust, where melting processes critically reduced the lithospheric strength during the late Miocene, to then propagate upward, reaching the topographic surface. Northward, the lithosphere comprised moderately larger strength, and the crustal discontinuities favored the development of larger folds with kilometric amplitude instead of strike-slip faults since the late Miocene.
ISSN: 1525-2027

hal-00671024
https://hal.archives-ouvertes.fr/hal-00671024
DOI : 10.1029/2010GC003274

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Atlas Mountains are characterized by high elevations and Quaternary volcanism. Long period magnetotelluric data acquired along a NNW-SSE transect reveal the presence of a conductive anomalous mantle below the High Atlas. Data dimensionality analyses show a preferent N80 degrees E strike of the deep resistivity structure in agreement with the induction vector alignment at long periods. Accordingly, a 2D inversion of the data set was carried out. Large resistive bodies at the crustal basement most likely correspond to batholiths emplaced in more conductive metapelites. They are covered by outcropping conductive sedimentary detritic and carbonate rocks. Lithospheric thinning producing anomalous mantle and basin development in the Atlas probably started during Triassic-Jurassic rifting. Inversion tectonics since the Oligocene produced low shortening on previous lithospheric weak zones, with thrusting of the Atlas above the stable African plate. Melting at the top of the anomalous mantle is connected with Quaternary basaltic volcanism in the Middle Atlas.
ISSN: 0278-7407

hal-00671017
https://hal.archives-ouvertes.fr/hal-00671017
DOI : 10.1029/2010TC002859

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
A NE-SW magnetotelluric 110 km-long profile including 18 sites was acquired across the western Rif Cordillera along the Eurasian-African plate boundary, allowing to constrain its poorly known deep structure. It extends from the Internal Zones, close to the Alboran coast, crossing the External Zones and up to the Gharb foreland basin. The periods recorded range from 0.001 s to 1000 s. The combination of magnetotelluric data with available geological data provides new insight regarding the relationship between deep and shallow crustal structures of the Rif Cordillera. Analyses of structural dimensionality suggest a preferential NW-SE direction, and a 2D joint inversion was performed. A 3D inversion extending the 2D model along the strike confirmed the reliability of this approach. The magnetotelluric model shows a heterogeneous upper crust in agreement with the geological structures observed at surface. The Internal Zones correspond to resistive (metamorphic rocks) and conductive (peridotites) bodies, while the External Zones and the foreland basin are characterized by large conductive bodies of variable thickness. A crustal detachment level separating shallow geological units from a probable variscan basement was inferred. At depth, the most relevant feature consists of large resistive bodies with a shallow irregular top, located below the frontal part of the Rif. The outcrops of exotic metapelitic, granitic and gneissic blocks in the frontal part of the Cordillera suggest that these large resistive bodies may correspond to a gneissic or granitic basement surrounded by metapelitic rocks. Late contractive thrust and diapiric processes were responsible for their uplift and shallow emplacement. The Rif constitutes an active southwestward vergent orogenic wedge, oblique to the present-day NW-SE convergent Eurasian-African plate boundary.
ISSN: 1525-2027

hal-00670999
https://hal.archives-ouvertes.fr/hal-00670999
DOI : 10.1029/2011GC003783

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Active faults from the Campo de Dalías (SE Betic Cordillera) allow us to constrain the deformation styles involved in the development of segmented oblique-slip faults. This sector constitutes the widest outcrop of Plio-Quaternary sediments in the northern boundary of the Alboran Sea. It has emerged since the Late Pliocene, and therefore provides recent deformation markers that are not disturbed by erosive processes. The faults started to grow during the Pleistocene, reactivating previous hybrid joints, with a normal-dextral slip. We present a detailed map of the largest fault in the area, the Loma del Viento fault, comprising six onshore segments. Based on field work and aerial photography, the distributions of the contiguous joints have been mapped, and the joints reactivated as faults are identified. Some of these fault segments are hard-linked, and fault slip enhances toward the linkage sectors between them with associated sedimentary depocenters. An electrical tomography profile reveals the wedge geometry of a unit of Pleistocene conglomerates and red silts that were coevally deposited during the fault movement. Long-term slip rate in the central part of the fault is estimated at 0.07 ± 0.03 mm/y. In addition, a seismic crisis nucleated close to the Loma del Viento fault during November 2010 was recorded. Moment tensor analysis of the two mainshocks (Mw 3.5 and 4.2) provides a focal solution indicating a N120°E striking right-lateral strike-slip fault. The corrugated morphology of the Loma del Viento fault may have influenced its seismic behavior. Some of the fault segments are oblique to the general motion of the fault. These oblique segments would provide higher resistance against the general fault motion and could lock the fault, leading to accumulate elastic energy.
ISSN: 0040-1951

hal-00750357
https://hal.archives-ouvertes.fr/hal-00750357
DOI : 10.1016/j.tecto.2011.12.001

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We analyze focal mechanisms of shallow-intermediate earthquakes in a NW-SE transect along the western Betic Cordillera and Alboran Sea, and deep earthquakes located in the central Betics to constrain the state of stress at the Gibraltar Arc slow convergence area. Shallow earthquakes (< 40 km) are preferably clustered at the mountain front. A general NW-SE horizontal compression is compatible with the convergence, and NW plunging compression axes are in agreement with frontal thrust activity. Toward the Alboran Sea the earthquakes are progressively deeper, reaching intermediate depths (40-120 km) near the coast and supporting the present-day activity of subduction only in this area. The Iberian continental crust concentrates most of the intermediate seismicity and is forced to partially sink into the mantle, probably through the pull of the oceanic slab. This downdip pull together with the buoyancy of the Iberian continental crust produces the slab curvature, downdip extension in the external arc of the continental slab, and downdip compression in the inner arc. T axes highly dipping to the southeast at 90-120 km depth occur at the oceanic/continental transition. Deep earthquakes (> 620 km) show very similar focal mechanisms, fitting the general slab behavior of resistance to further descent at the 660 km discontinuity. Seismicity features evidence the present-day stress distribution in a context of transition from subduction to continental collision.
ISSN: 1525-2027

hal-00669889
https://hal.archives-ouvertes.fr/hal-00669889
DOI : 10.1029/2011GC003824

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
without
ISSN: 0278-7407

hal-00464176
https://hal.archives-ouvertes.fr/hal-00464176
DOI : 10.1029/2009TC002527