Éditeur(s) : HAL CCSD Universidad Complutense de Madrid
Résumé : Based on new seismological and recent faulting data, we analyze five main sectors in the western part of the Betic Cordillera from an active tectonic perspective: i. The northwestern frontal sector of the cordillera, including the Morón de la Frontera area, with shallow (< 15 km depth) seismogenic active NE-SW reverse and strike-slip faults that do not reach the surface. ii. The Teba area, in the External Zones, which is deformed by sparse N-S to NW-SE normal faults with associated wedges of Quaternary sediments and active strike-slip faults at intermediate crustal levels. iii. The Ronda Basin, representing the major Late Miocene intramontane basin of the western Betic Cordillera, is mainly deformed by NNE-SSW and WNW-ESE folds and locally by NW-SE normal faults. iv. The internal part of the orogen, which is characterized by shallow (<40 km) and intermediate (40 to 120 km depth) seismicity beneath Málaga and the Alborán Sea, ENE-WSW folding, relief uplift, river incision and scarce active faults with surface expression. v. The Spanish Atlantic coast, which coincides with the western end of the Betic orogen, where Pliocene to Quaternary shallowmarine sedimentary rocks are deformed by meso-scale NW-SE oriented normal faults and few ENE-WSW reverse faults. These data support the recent tectonic activity of the western Betic Cordillera determined by the NW-SE Eurasian-African convergence with variable features from the mountain front, characterized by shallow deformations, up to the Internal Zones that mainly undergo uplift and intermediate seismicity.
ISSN: 1698-6180

hal-00750359
https://hal.archives-ouvertes.fr/hal-00750359
DOI : 10.5209/rev_JIGE.2012.v38.n1.39211

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cerro del Almirez massif (Nevado–Filábride Complex, Betic Cordillera, SE Spain) is composed of antigorite (Atg-) serpentinite and chlorite (Chl-) harzburgite separated by a thin reaction front formed in a palaeo-subduction setting. These ultramafic rocks preserve unique prograde structures related to the pre- and peak high-pressure event (1.6–1.9 GPa and 680–710 °C). The oldest subduction-related structures are preserved in Atg-serpentinites: a penetrative S1 foliation and associated L1 stretching lineation that formed in a non-coaxial regime with a top-to-the-W sense of shear. This planar–linear fabric is crosscut by olivine ± Ti-clinohumite veins, formed during the prograde breakdown of brucite and pre-metamorphic clinopyroxene, which form a system of veins decimetres long. They record embrittlement processes due to the release of 6 vol.% of H2O associated with brucite dehydration. The growth of prograde olivine and/or tremolite porphyroblasts is syn- to post-kinematic in relation to the S1 foliation. Further reactions at higher temperature related to the complete breakdown of the Atg (i.e. Atg-out) are post-kinematic to S1. Prograde Chl-harzburgite is crosscut by sets of conjugate zones associated with grain-size reduction of olivine grains. These grain-size reduction zones are interpreted as brittle structures generated by hydrofracturing due to overpressure fluids in a compressional setting at low-differential stresses.Structures related to the exhumation process are mainly preserved in the metasedimentary host rock, where an S2/L2 planar–linear fabric developed within a shear zone dominated by a non-coaxial regime with a top-to-the-W sense of movement in a transpressional regime. Peak metamorphic conditions deduced for the schists are similar in pressure (1.3–1.9 GPa) but lower in temperature (560–590 °C) compared to the ultramafic rocks in contact with them, suggesting a major shear zone at the base of the ultramafic massif during D2 deformation in a right-handed transpressional regime.
ISSN: 0040-1951

hal-01172303
https://hal.archives-ouvertes.fr/hal-01172303
DOI : 10.1016/j.tecto.2014.12.022

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report gabbroic dikes in the plagioclase tectonite domains of the Ojén and Ronda massifs (Betic Cordillera, southern Spain), which record crystallization at low-pressure syn-, or slightly postkinematic to the late ductile history of the Betic Peridotite in the westernmost Mediterranean. We present mineral major and trace element compositional data of discordant gabbroic dikes in the Ojén massif and gabbroic patches in the Ronda massif, complemented by the whole rock and electron backscattered diffraction (EBSD) data of the Ojén occurrence. In the Ojén massif, gabbro occurs as 1–3 centimeter wide discordant dikes that crosscut the plagioclase tectonite foliation at high angle. These dikes are composed of cm-scale igneous plagioclase and clinopyroxene crystals that show shape preferred orientations subparallel to the lineation of the host peridotite and oblique to the trend of the dike. Intrusion of Ojén gabbro dikes is coherent with the stress field that formed the high temperature, ductile plagioclase tectonite foliation and then attests for a mantle igneous event prior to the intracrustal emplacement of the massif. In the Ronda massif, gabbroic rocks crystallized in subcentimeter wide anastomozing veins, or as interstitial patches in the host dunite. They are mostly composed of plagioclase and clinopyroxene. Plagioclase composition is bytownitic in the Ojén, and andesinic in the Ronda massif. Clinopyroxene in both places shows identical, light Rare-Earth Element (LREE) depleted trace element patterns. The calculated trace element composition of melts in exchange equilibrium with the studied igneous clinopyroxenes reflects LREE-enriched character coupled with negative Eu anomaly, and indicates that gabbro-forming melts in Ronda and Ojén share a common melt source with an island arc tholeiitic affinity. Geothermobarometric data and liquidus mineralogy indicate that gabbro crystallization occurred at shallow depths (0.2–0.5 GPa) in a 7–16 km thick lithospheric section. These data suggest that gabbro-forming melts in the Betic Peridotite record a mantle igneous event at very shallow depths and provide evidence for the hyperextension of the continental lithosphere compatible with extreme backarc basin extension induced by the slab rollback of the Cenozoic subduction system in the westernmost Mediterranean.
ISSN: 0040-1951

hal-01172246
https://hal.archives-ouvertes.fr/hal-01172246
DOI : 10.1016/j.tecto.2015.03.011

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Mélange rocks outcrop widely in the central and western frontal sectors of the Betic Cordillera, as in many other collisional orogens where they form part of the accretionary wedges. Extrusion of Triassic plastic clays and evaporites was favored by the progressive accretion of the Betic External Zones, mixing rocks of different provenance and forming a synorogenic frontal mélange unit. MT data coupled with gravity data are a valid combined methodology to characterize the geometry of these mélange units, since the characterization of plastic rocks geometry is usually uncertain using seismic techniques. The results correlate well with known geological features (sedimentary basins, calcareous ranges, evaporitic rocks) and reveal the deep geometry. A resistive body, slightly dipping toward the SE, points to the continuity of the Iberian Massif below the Guadalquivir basin (2°) and the External Zones (6-8°). To the south, gravity models show the Iberian continental crust subducting below the Internal Zones with a roughly 20-35° slope. The main conductive bodies are related to the location of evaporitic rocks involved in the frontal mélange. They overlie the Iberian Massif and, southwards, the frontal Jurassic and Cretaceous limestone sequences of the External and Median Subbetics. In this setting, thick plastic rock units placed above the foreland could act as a lubricant facilitating continental subduction, and being progressively accreted toward a frontal mélange.
ISSN: 1525-2027

hal-00750364
https://hal.archives-ouvertes.fr/hal-00750364
DOI : 10.1029/2012GC004153

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Serpentinites form by hydration of mantle peridotite and constitute the largest potential reservoir of fluid-mobile elements entering subduction zones. Isotope ratios of one such element, boron, distinguish fluid contributions from crustal versus serpentinite sources. Despite 85% of boron hosted within abyssal peridotite being lost at the onset of subduction at the lizardite-to-antigorite transition, a sufficient cargo of boron to account for the composition of island arc magma is retained (c. 7 μg g− 1, with a δ11B of + 22‰) until the down-going slab reaches the antigorite-out isograd. At this point a 11B-rich fluid, capable of providing the distinctive δ11B signature of island arc basalts, is released. Beyond the uniquely preserved antigorite-out isograd in serpentinites from Cerro del Almirez, Betic Cordillera, Spain, the prograde lithologies (antigorite–chlorite–orthopyroxene–olivine serpentinite, granofels-texture chlorite-harzburgite and spinifex-texture chlorite-harzburgite) have very different boron isotope signatures (δ11B = − 3 to + 6‰), but with no significant difference in boron concentration compared to the antigorite-serpentinite on the low P–T side of the isograd. 11B-rich fluid, which at least partly equilibrated with pelagic sediments, is implicated in the composition of these prograde lithologies, which dehydrated under open-system conditions. Serpentinite-hosted boron lost during the early stages of dehydration is readily incorporated into forearc peridotite. This, in turn, may be dragged to sub-arc depths as a result of subduction erosion and incorporated in a mélange comprising forearc serpentinite, altered oceanic crust and pelagic sediment. At the antigorite-out isograd it dehydrates, thus potentially providing an additional source of 11B-rich fluids.
ISSN: 0009-2541

hal-01172276
https://hal.archives-ouvertes.fr/hal-01172276
DOI : 10.1016/j.chemgeo.2014.03.015

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Mantle xenoliths in Pliocene alkali basalts of the eastern Betics (SE Iberia, Spain) are spinel ± plagioclase lherzolite, with minor harzburgite and wehrlite, displaying porphyroclastic or equigranular textures. Equigranular peridotites have olivine crystal preferred orientation (CPO) patterns similar to those of porphyroclastic xenoliths but slightly more dispersed. Olivine CPO shows [100]-fiber patterns characterized by strong alignment of [100]-axes subparallel to the stretching lineation and a girdle distribution of [010]-axes normal to it. This pattern is consistent with simple shear or transtensional deformation accommodated by dislocation creep. One xenolith provides evidence for synkinematic reactive percolation of subduction-related Si-rich melts/fluids that resulted in oriented crystallization of orthopyroxene. Despite a seemingly undeformed microstructure, the CPO in orthopyroxenite veins in composite xenoliths is identical to those of pyroxenes in the host peridotite, suggesting late-kinematic crystallization. Based on these observations, we propose that the annealing producing the equigranular microstructures was triggered by melt percolation in the shallow subcontinental lithospheric mantle coeval to the late Neogene formation of veins in composite xenoliths. Calculated seismic properties are characterized by fast propagation of P waves and polarization of fast S waves parallel to olivine [100]-axis (stretching lineation). These data are compatible with present-day seismic anisotropy observations in SE Iberia if the foliations in the lithospheric mantle are steeply dipping and lineations are subhorizontal with ENE strike, implying dominantly horizontal mantle flow in the ENE-WSW direction within vertical planes, that is, subparallel to the paleo-Iberian margin. The measured anisotropy could thus reflect a lithospheric fabric due to strike-slip deformation in the late Miocene in the context of WSW tearing of the subducted south Iberian margin lithosphere.
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809/document
https://hal.archives-ouvertes.fr/hal-01685809/file/Hidas_et_al-2016-Tectonics.pdf
DOI : 10.1002/2016TC004165

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Regional-scale deformation taking place in a strongly anisotropic, yet homogeneous metapelitic protolith during an apparently single tectonic event was systematically investigated as a function of the distance to the main tectonic contact (i.e., the Filabres shear zone, a major detachment in the Betic Cordilleras, Spain). The density of C3' shear bands (or extensional crenulation cleavage) reworking the earlier S2 schistosity increases exponentially towards the contact, in parallel with the decrease in the size of the shear domains. Systematic variations in angles and shape ratios are also reported. Deformation and age patterns, however, suggest that this spectacular trend at least partly results from a progressive localization of the deformation through time. This fossilized shear strain gradient was thus produced somewhat diachronously. Such shear strain patterns nevertheless provide a mean to constrain the rheological properties for such weak lithologies and a mean to better understand crustal deformation.
ISSN: 0191-8141

insu-00545043
https://hal-insu.archives-ouvertes.fr/insu-00545043
https://hal-insu.archives-ouvertes.fr/insu-00545043/document
https://hal-insu.archives-ouvertes.fr/insu-00545043/file/JSGagardetal2.pdf
DOI : 10.1016/j.jsg.2010.11.011

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The nucleation, propagation, and associated folding of ramp-flat-ramp normal faults were analyzed from field examples developed in a brittle/ductile multilayer sequence of the Huércal-Overa Basin (SE Spain). Gently dipping sandy silt layers, which display a low cohesive strength (C0 = 7 kPa, μ = 34°), favor the development of extensional detachments. A tectonic origin instead of a possible gravitational origin is supported by the perpendicularity between the paleoslope direction of the fluvial-deltaic environment inferred from imbricated pebbles, and the senses of movement deduced from fault slicken-lines. The link between high-angle normal faults (HANFs) --formed at different levels in the layered sequence-- with horizontal fault segments comes to develop ramp-flat-ramp normal faults with associated roll-over in the hanging wall. Observed extensional duplexes are formed by parallel detachments connected through synthetic Riedel faults. These Riedel faults would produce the back-rotation of the individual blocks (horses), i.e., extensional folding of the originally subhorizontal layers. There is no correlation between the analyzed ramp-flat-ramp normal faults, accommodating south-southeastward extension during Serravallian-lower Tortonian, and either the regional Alpujarride/Nevado-Filabride west-directed extensional shear zone or the top-to-the-north detachments within Alpujarride units, which are clearly sealed by Serravallian-lower Tortonian sediments. Therefore, the studied normal faults are restricted to the brittle/ductile multilayer fluvio/deltaic sequence and accommodate moderate late extension instead of belonging to a large crustal extensional system connected with a regional detachment at depth. Therefore, the basin formed in a moderate crustal thickness context where small and medium-scale extensional systems were subordinate structures. These natural examples support the development of low-angle normal faults at very shallow crustal levels in multilayer sequences with suitable rheological conditions.
ISSN: 0278-7407

hal-00750352
https://hal.archives-ouvertes.fr/hal-00750352
DOI : 10.1029/2012TC003130

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We analyze focal mechanisms of shallow-intermediate earthquakes in a NW-SE transect along the western Betic Cordillera and Alboran Sea, and deep earthquakes located in the central Betics to constrain the state of stress at the Gibraltar Arc slow convergence area. Shallow earthquakes (< 40 km) are preferably clustered at the mountain front. A general NW-SE horizontal compression is compatible with the convergence, and NW plunging compression axes are in agreement with frontal thrust activity. Toward the Alboran Sea the earthquakes are progressively deeper, reaching intermediate depths (40-120 km) near the coast and supporting the present-day activity of subduction only in this area. The Iberian continental crust concentrates most of the intermediate seismicity and is forced to partially sink into the mantle, probably through the pull of the oceanic slab. This downdip pull together with the buoyancy of the Iberian continental crust produces the slab curvature, downdip extension in the external arc of the continental slab, and downdip compression in the inner arc. T axes highly dipping to the southeast at 90-120 km depth occur at the oceanic/continental transition. Deep earthquakes (> 620 km) show very similar focal mechanisms, fitting the general slab behavior of resistance to further descent at the 660 km discontinuity. Seismicity features evidence the present-day stress distribution in a context of transition from subduction to continental collision.
ISSN: 1525-2027

hal-00669889
https://hal.archives-ouvertes.fr/hal-00669889
DOI : 10.1029/2011GC003824

Éditeur(s) : HAL CCSD
Résumé : International audience
The Rif Chain (Northern Morocco) belongs, with the Betic Cordillera(Southern Spain), to the western termination of the Alpine belt. Deepestunits of the Rif Internal Zones (i.e. Lower Sebtides) outcrop in three areas, from North to South : Ceuta, Cabo Negro and Beni Bousera.The quick exhumation of these units during the Late Oligocene-EarlyMiocene is related with a crustal thinning and the Alboran Sea rifting.Despite Beni Bousera massif has been well investigated, no data areavailable in Ceuta and Cabo Negro areas. This study aims to constrainthe last steps of cooling and exhumation in the Lower Sebtides usingmedium- and low-temperature thermochronological data. Combinationof Ar-Ar on micas, fission tracks and (U-Th)/He on apatites (respectivelyAFT and AHe) from high-grade rocks allows understanding thermalhistory between 450-350°C and surface temperatures. These datasuggest a similar cooling evolution of the Ceuta and Cabo Negro units.Ages obtained with all these methods are comprised in the same interval,between 22 and 18 Ma. These data record an almost instantaneouscooling (between 50 and 200°C/Ma) associated to final exhumation afterthe Oligo-Miocene thermal event affecting these units at shallowdepths (10 km). Low-temperature data suggest that Ceuta and CaboNegro units cooled at surface temperatures before Beni Bousera ones.Since the end of Burdigalian, the Rif internal zones vertical movementsdid not exceed 1km, even during the Messinian Salinity. AFT and AHeages in the whole Sebtides are also slightly older than these obtainedin their Spanish equivalent (Alpujarrides). The Gibraltar arc is dividedinto several independent crustal blocks separated by major fault zonesperpendicular to the coast that could have induced independent verticalmovements during the entire Neogene
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080768
https://hal-insu.archives-ouvertes.fr/insu-01080768

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We have inferred the deformation mechanisms of antigorite by high-resolution EBSD mapping of samples from Cerro del Almirez ultramafic massif (Betic Cordillera, SE Spain). Textural relations and phase diagram calculations constrain the foliation development conditions to the subduction prograde path at up to 600-630 °C and 1.6-1.9 GPa. Deformation was followed by static annealing of antigorite at ca. 680 °C. The Crystal Preferred Orientation (CPO) of antigorite is characterised by a strong alignment of (001) poles normal to the foliation plane and a weaker, but clear, parallelism between [100] axes and the macroscopic lineation defined by the elongation of magnetite aggregates. Analysis of misorientations across subgrains shows predominance of [010] rotation axis, consistent with activation of the [100](001) slip system. However, tilt subgrain boundaries subparallel to (100), probably formed by edge dislocations of this system, are subsidiary. Most subgrain boundaries are subparallel to (001) planes. They are interpreted as (001) twins wherein continuing viscoplastic deformation resulted in a slight increase of the misorientation between the twins. Modelling of the evolution of the antigorite CPO using a lower bound approach and considering different deformation regimes and sets of basal and non-basal slip systems has shown that intensities of [100] and [010] maxima reflect the relative strength of the antigorite [100](001) and [010](001) systems. Activation of other basal or non-basal slip systems does not change significantly the CPO patterns, but results in less concentrated CPO. 3D transpression models better reproduce the CPO of natural antigorite serpentinites. We propose that the widespread occurrence of strong CPO in high-pressure antigorite serpentinite is consistent with deformation by dislocation creep with dominant glide on [hk0](001), together with the activation of twinning, implying that a power law rheology would better account for the mechanical behaviour of antigorite serpentinite deep in the subduction channel and mantle wedge.
ISSN: 0012-821X

hal-00795511
https://hal.archives-ouvertes.fr/hal-00795511
DOI : 10.1016/j.epsl.2012.06.049

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present new Sr-Nd-Pb isotope data of the western Alpujárride metamorphic basement and the pre-Miocene Flysch sediments of the Betic Cordillera (southern Spain). Nd model ages are consistent with an increasing detrital input from the Alborán domain to the Flysch Trough in the western Mediterranean during the late Oligocene. The Alpujárride metamorphic crustal rocks derived from Archean-Paleoproterozoic terranes located along the northern margin of Gondwana in the Neoproterozoic. The heterogeneous isotopic signatures of the Alpujárride units indicate that they have different sedimentary protoliths and underwent contrasted Variscan and pre-Variscan tectono-magmatic evolutions. Melts/fluids derived from the western Alpujárride gneisses contaminated the mantle source of the Ronda high-Mg pyroxenite dykes, implying that the Alpujárride lower crust underthrusted the subcontinental lithospheric mantle of the Alborán domain generating subduction-like magmatism in the late Oligocene. The western Alpujárride upper crust is involved in the Neogene volcanism of the Alborán Sea basin, but only contaminated some LREE-enriched calc-alkaline lavas erupted along the continental margins. On the other hand, tholeiitic lavas in the center of the basin show no isotopic evidence of crustal assimilation. This indicates that most of the crust in the central Alborán Sea accreted by Miocene tholeiitic magmatism and that Alpujárride lower crust is absent and likely foundered close to the continental margins of the basin.
ISSN: 0024-4937

hal-01526912
https://hal.archives-ouvertes.fr/hal-01526912
DOI : 10.1016/j.lithos.2016.10.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Before attaining the mantle wedge, where they trigger partial melting, volatiles released from dehydration reactions in the slab have to migrate across a relatively cold (<750 degrees C), peridotite-layer above the incoming slab. In order to unravel the mechanisms allowing for this initial stage of fluid transport, we performed a detailed field and microstructural study of metamorphic prograde peridotites in the Cerro del Almirez ultramafic massif (Betic Cordillera, Spain), where evidences of one of the most important dehydration reactions in subduction zones, the high-pressure antigorite breakdown (P = 1.6-1.9 GPa and T approximate to 680 degrees C), can be mapped in the field. This reaction led to arborescent growth of centimeter-size olivine and orthopyroxene, producing a chlorite-harzburgite with a spinifex-like texture. Microstructural observations and crystal preferred (CPO) mapping show no evidences of solid-state deformation during the prograde growth of olivine and orthopyroxene at the expenses of antigorite. However, a few tens to a hundred meters away from the reaction front, the metamorphic texture is partially obliterated by grain-size reduction in roughly planar conjugate zones, a few mm to meters wide. Grain size reduction zones (GSRZ) are characterized by (1) sharp contacts with undeformed spinifex-like texture domains, (2) important reduction of the olivine grain size (60-250 mu m), (3) olivine color change from brownish to colorless, (4) decrease in the modal amount of orthopyroxene, and (5) at the mm- to cm-scale, irregular shapes and abrupt terminations. Field and microstructural observations exclude that relative displacement took place across these GSRZ. Changes in modal composition imply reactions with fluids undersaturated in silica. Analysis of olivine crystal-preferred orientations (CPO) in GSRZ shows patterns similar, but more dispersed, than those in neighboring spinifex-like domains. It also reveals mm- to cm-scale discrete domains with rather homogeneous crystallographic orientations suggesting inheritance from the preexisting spinifex-like olivines in the host peridotite. Misorientation angles between neighboring grains in the GSRZ show peaks at similar to 5-10 degrees and similar to 20 degrees, but rotations are not crystallographically controlled. Based on these observations, we rule out the formation of the GSRZ by dynamic recrystallization during dislocation creep and propose that they record brittle deformation (microcraking) of the spinifex-like chlorite-harzburgite, probably induced by hydrofracturing at high pressure and relative low temperature conditions (680-710 degrees C). High-pressure hydrofracturing can, thus, be invoked as an efficient mechanism for fluid flow across the cold top-slab mantle layer, hence allowing the slab-derived fluids to ingress in the wedge.
ISSN: 0012-821X

hal-00534035
https://hal.archives-ouvertes.fr/hal-00534035
DOI : 10.1016/j.epsl.2010.06.029

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
New magnetotelluric and receiver transfer function studies provide insights from the upper to the lower crust of the eastern Betic Cordillera, which is deformed by large folds, normal faults, and a major transcurrent left-lateral fault, the Carboneras Fault Zone (CFZ). Receiver function analysis determines a NNW dipping Moho reaching 20 degrees that increases in depth, from 20 km south of the CFZ up to 34 km in the Sierra de Los Filabres. In addition, seismic discontinuities determined in the upper crust are interpreted as major contacts between metamorphic complexes that are detached and folded. The MT inversion model reveals a conductive zone, also representing a crustal seismic discontinuity, associated with the Alpujarride/Nevado-Filabride contact and fitting the N vergent geometry of the Sierra Alhamilla antiform. A small flexure at Moho coincides with the CFZ, as revealed by the Bouguer anomaly trend, in agreement with the receiver function results. Moreover, the Bahr strike and tipper angle at the stations placed closest to the CFZ clearly reveal the continuity of the CFZ at least down to approximately 15 km in depth, crossing all the detected crustal discontinuities up to the Moho. The lack of a clear Moho offset associated with the Carboneras Fault supports the idea that some large strike-slip faults tend to accommodate the deformation by a broadening fault zone at lower crustal levels. Its nucleation could occur at the base of a thin crust, where melting processes critically reduced the lithospheric strength during the late Miocene, to then propagate upward, reaching the topographic surface. Northward, the lithosphere comprised moderately larger strength, and the crustal discontinuities favored the development of larger folds with kilometric amplitude instead of strike-slip faults since the late Miocene.
ISSN: 1525-2027

hal-00671024
https://hal.archives-ouvertes.fr/hal-00671024
DOI : 10.1029/2010GC003274

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Active faults from the Campo de Dalías (SE Betic Cordillera) allow us to constrain the deformation styles involved in the development of segmented oblique-slip faults. This sector constitutes the widest outcrop of Plio-Quaternary sediments in the northern boundary of the Alboran Sea. It has emerged since the Late Pliocene, and therefore provides recent deformation markers that are not disturbed by erosive processes. The faults started to grow during the Pleistocene, reactivating previous hybrid joints, with a normal-dextral slip. We present a detailed map of the largest fault in the area, the Loma del Viento fault, comprising six onshore segments. Based on field work and aerial photography, the distributions of the contiguous joints have been mapped, and the joints reactivated as faults are identified. Some of these fault segments are hard-linked, and fault slip enhances toward the linkage sectors between them with associated sedimentary depocenters. An electrical tomography profile reveals the wedge geometry of a unit of Pleistocene conglomerates and red silts that were coevally deposited during the fault movement. Long-term slip rate in the central part of the fault is estimated at 0.07 ± 0.03 mm/y. In addition, a seismic crisis nucleated close to the Loma del Viento fault during November 2010 was recorded. Moment tensor analysis of the two mainshocks (Mw 3.5 and 4.2) provides a focal solution indicating a N120°E striking right-lateral strike-slip fault. The corrugated morphology of the Loma del Viento fault may have influenced its seismic behavior. Some of the fault segments are oblique to the general motion of the fault. These oblique segments would provide higher resistance against the general fault motion and could lock the fault, leading to accumulate elastic energy.
ISSN: 0040-1951

hal-00750357
https://hal.archives-ouvertes.fr/hal-00750357
DOI : 10.1016/j.tecto.2011.12.001

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Dehydration reactions result in minerals’ replacement and a transient fluid-filled porosity. These reactions involve interface-coupled dissolution–precipitation and might therefore lead to fixed crystallographic orientation relations between reactant (protolith) and product phases (i.e. topotaxy). We investigate these two phenomena in the dehydration of a foliated antigorite (atg) serpentinite by comparing the crystallographic preferred orientation (CPO) developed by olivine (ol), orthopyroxene (opx) and chlorite (chl) during high-pressure antigorite and chlorite dehydration in piston-cylinder experiments and in natural samples recording the dehydration of antigorite (Cerro del Almirez, Betic Cordillera, Spain). Experiments were performed under undrained conditions resulting in fluid-filled porosity and in strong CPO of the prograde minerals, controlled by the pre-existing antigorite CPO in the reactant foliated serpentinite. The orientation of a ol,opx and c∗chl is parallel to c∗atg from the protolith. The Cerro del Almirez samples show similar, locally well-developed topotactic relations between orthopyroxene, chlorite and antigorite, but the product CPOs are weaker and more complex at the thin section scale. In contrast to the experiments, olivine from natural samples shows a weak correlation between b ol and the former c∗atg. We relate the strengthening of local topotactic relations and the weakening of the inherited CPO at a larger scale in natural samples to compaction and associated fluid migration. Microstructural features that might be related to compaction in the natural samples include: (1) smooth bending of the former foliation, (2) gradual crystallographic misorientation (up to 16°) of prismatic orthopyroxene due to buckling by dislocation creep, (3) inversion of enstatite to low clinoenstatite (P21/c) along lamellae and (4) brittle fracturing of prismatic orthopyroxene enclosed by plastically deformed chlorite. The coexistence of orthopyroxene buckling and clinoenstatite lamellae enables estimating the local strain rates and shear stresses generated during compaction. An lower bound for the strain rates in the order of 10−12 to 10−13 s−1 and shear stresses of 60–70 MPa are estimated based on creep data. Lower shear stresses (20–40 MPa) are retrieved using a theoretical approach. These data point to slow compaction (and fluid extraction) in nature if the system is not perturbed by external forces, with rates only marginally higher than the viscoplastic deformation of the solid matrix.
ISSN: 0010-7999

hal-01174158
https://hal.archives-ouvertes.fr/hal-01174158
DOI : 10.1007/s00410-015-1129-4