Éditeur(s) : HAL CCSD Ocean Drilling Programm
Résumé : This paper provides a summary of postcruise scientific results from Ocean Drilling Program (ODP) Leg 209 available to date, building upon shipboard observations and syntheses summarized in the Leg 209 Initial Results volume. During Leg 209, 19 holes were drilled at 8 sites along the Mid-Atlantic Ridge from 14°43´ to 15°44´N, mainly in residual mantle peridotite intruded by gabbroic rocks, in order to understand the tectonic and structural processes responsible for formation of oceanic lithosphere with abundant residual peridotite exposed on the seafloor coupled with a relatively low proportion of volcanic rocks. Based on proportions of recovered lithologies, the entire area may be underlain by mantle peridotite with ~20%–40% gabbroic intrusions and impregnations. Impregnated peridotites with olivine + two pyroxenes + plagioclase + spinel that apparently formed in equilibrium probably record crystallization from primitive mid-ocean-ridge basalt at pressures of 0.5–0.6 GPa. Metamorphic equilibria record isobaric cooling to ~1100°C at this pressure. Thus, the conductively cooled thermal boundary layer beneath the Mid-Atlantic Ridge in this region is >15 km thick. Combined crystallization and reaction with residual peridotite formed a series of impregnated peridotites recording increasing Na content at nearly constant Mg#; this process could explain some of the variation in fractionation-corrected Na (e.g., Na = 8.0) observed in mid-ocean-ridge basalts. Clinopyroxene textures and compositions record such impregnation processes, and they are particularly well documented for Site 1274. Other Leg 209 gabbroic rocks formed from extensive crystallization of highly evolved melts, indicating that a substantial proportion of melt entering the thermal boundary layer crystallizes entirely beneath the seafloor, with no volcanic equivalent. Alteration of peridotites occurred over a range of temperatures and is the result of three distinct processes: rock-dominated serpentinization with formation of brucite in olivine-rich lithologies, fluid-dominated serpentinization with formation of magnetite and no brucite, and fluid-dominated talc alteration with addition of SiO2 as well as H2O and oxygen. The latter two processes also exhibit detectable trace element metasomatism that is distinct in its character from the igneous impregnation described in the previous paragraph. Microstructures show that most residual peridotites were not ductilely deformed at temperatures less than ~1200°C. Structural and paleomagnetic data require tectonic rotations of relatively undeformed blocks; some rotations probably exceeded 60° around nearly horizontal axes parallel to the rift axis. Rotations occurred along several generations of high-temperature mylonitic shear zones extending deeper than 15 km depth and numerous faults at lower temperature. Early formed shear zones and faults were passively rotated around later features; such a process could have produced low-angle fault surfaces without slip on low-angle faults. This region provides end-member examples of processes that are common at many or most slow-spreading ridges. Osmium isotope ratios indicate an ancient history of depletion for residual peridotites from the 14°–16°N region along the Mid-Atlantic Ridge. Though depleted Os isotope ratios in peridotite have been reported elsewhere along the global ridge system, the values from this region are among the most depleted. In general, Os isotope ratios from mid-ocean-ridge basalts are systematically more radiogenic than Os isotope ratios from ridge peridotite samples, suggesting a polygenetic heterogeneous source for mid-ocean-ridge basalts. Geochemical studies of zircons from Leg 209 gabbroic rocks and impregnated peridotites, together with other ridge and arc-related zircons, indicate that ridge zircons have systematically lower fractionation-corrected U and Th concentrations compared to arc zircons. This observation provides a tool for interpreting the tectonic provenance of ancient detrital zircons and indicates an arclike provenance for Hadean detrital zircons. Geobiological studies and aerobiological studies were also undertaken during Leg 209. The geobiological work found no measurable microbial enhancement of olivine dissolution rate, possibly because the samples from Leg 209 were sterile. The aerobiological study determined that dust from North Africa, collected from the derrick of the JOIDES Resolution during Leg 209, contains a variety of abundant microorganisms.
Proceedings ODP, scientific results, 209

hal-00407966
https://hal.archives-ouvertes.fr/hal-00407966
DOI : 10.2973/odp.proc.sr.209.001.2007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
IODP Site U1309 was drilled at Atlantis Massif, an oceanic core complex, at 30 degrees N on the Mid-Atlantic Ridge (MAR). We present the results of a bulk rock geochemical study (major and trace elements) carried out on 228 samples representative of the different lithologies sampled at this location. Over 96% of Hole U1309D is made up of gabbroic rocks. Diabases and basalts cross-cut the upper part of the section; they have depleted MORB compositions similar to basalts sampled at MAR 30 degrees N. Relics of mantle were recovered at shallow depth. Mantle peridotites show petrographic and geochemical evidence of extensive melt-rock interactions. Gabbroic rocks comprise: olivine-rich troctolites (>70% modal olivine) and troctolites having high Mg# (82-89), high Ni (up to 2300 ppm) and depleted trace element compositions (Yb 0.06-0.8 ppm); olivine gabbros and gabbros (including gabbronorites) with Mg# of 60-86 and low trace element contents (Yb 0.125-2.5 ppm); and oxide gabbros and leucocratic dykes with low Mg# (<50), low Ni (similar to 65 ppm) and high trace element contents (Yb up to 26 ppm). Troctolites and gabbros are amongst the most primitive and depleted oceanic gabbroic rocks. The main geochemical characteristics of Site U1309 gabbroic rocks are consistent with a formation as a cumulate sequence after a common parental MORB melt, although (lack of systematic) downhole variations indicate that the gabbroic series were built by multiple magma injections. In detail, textural and geochemical variations in olivine-rich troctolites and gabbronorites suggest chemical interaction (assimilation?) between the parental melt and the intruded lithosphere. Site U1309 gabbroic rocks do not represent the complementary magmatic product of 30 degrees N volcanics, although they sample the same mantle source. The bulk trace element composition of Site U1309 gabbroic rocks is similar to primitive MORB melt compositions; this implies that there was no large scale removal of melts from this gabbro section. The occurrence of such a large magmatic sequence implies that a high magmatic activity is associated with the formation of Atlantis Massif. Our results suggest that almost all melts feeding this magmatic system stays trapped into the intruded lithosphere.
ISSN: 0012-821X

hal-00413562
https://hal.archives-ouvertes.fr/hal-00413562
DOI : 10.1016/j.epsl.2008.12.034

Éditeur(s) : Amer Geophysical Union
Résumé : A tectonic model of the evolution of the northern half of the South Fiji Basin, including the Minerva Triple Junction and Cook Fracture Zone, is developed from regional gravity, multibeam bathymetry, and a new interpretation of magnetic anomalies pinned to radiometric dates of oceanic crust in the basin. The geometry and age of a portion of the Minerva Triple Junction and the Cook-Minerva spreading center (the connection from the triple junction to the Cook Fracture Zone, which accommodated coeval opening of the Norfolk Basin), are resolved with multibeam bathymetry and magnetics. The South Fiji Basin opened from about 34 to 15 Ma in an anticlockwise sweep about an Euler pole located at the northern end of the present Lau Ridge. This rotation and a rigidly straight southeastward motion of the Three Kings Ridge were accommodated by the configuration of the triple junction changing from ridge-fault-fault to ridge-ridge-fault to ridge-ridge-ridge. During this evolution the southeastern arm of the system, the Julia Fracture Zone, underwent several transformations and the Cook-Minerva spreading center experienced repeated ridge jumps. The kinematics of the northern South Fiji Basin dictate, to a large extent, the evolution of the southern South Fiji Basin and the Norfolk Basin. This in turn leads to the interpretation of a complex trench-trench-double transform fault framework at the northern New Zealand margin, which explains most aspects of the geology, structure, and arc volcanic history of the margin and provides a radical new setting for the origin of the Northland Allochthon.
Geochemistry Geophysics Geosystems (1525-2027) (Amer Geophysical Union), 2011-02 , Vol. 12 , N. Q02004 , P. 1-20

Droits : 2011 American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00030/14112/11362.pdf
DOI:10.1029/2010GC003291
http://archimer.ifremer.fr/doc/00030/14112/

Éditeur(s) : HAL CCSD American Geophysical Union - AGU
Résumé : IODP Expedition 335 "Superfast Spreading Rate Crust 4" returned to ODP Hole 1256D with the intent of deepening this reference penetration of intact ocean crust several hundred meters into cumulate gabbros. This was the fourth cruise of the superfast campaign to understand the formation of oceanic crust accreted at fast spreading ridges, by exploiting the inverse relationship between spreading rate and the depth to low velocity zones seismically imaged at active mid-ocean zones, thought to be magma chambers. Site 1256 is located on 15-million-year-old crust formed at the East Pacific Rise during an episode of superfast ocean spreading (>200 mm/yr full rate). Three earlier cruises to Hole 1256D have drilled through the sediments, lavas and dikes and 100 m into a complex dike-gabbro transition zone. The specific objectives of IODP Expedition 335 were to: (1) test models of magmatic accretion at fast spreading ocean ridges; (2) quantify the vigor of hydrothermal cooling of the lower crust; (3) establish the geological meaning of the seismic Layer 2-3 boundary at Site 1256; and (4) estimate the contribution of lower crustal gabbros to marine magnetic anomalies. It was anticipated that even a shortened IODP Expedition could deepen Hole 1256D a significant distance (300 m) into cumulate gabbros. Operations on IODP Expedition 335 proved challenging from the outset with almost three weeks spent re-opening and securing unstable sections of the Hole. When coring commenced, the destruction of a hard-formation C9 rotary coring bit at the bottom of the hole required further remedial operations to remove junk and huge volumes of accumulated drill cuttings. Hole-cleaning operations using junk baskets returned large samples of a contact-metamorphic aureole between the sheeted dikes and a major heat source below. These large (up to 3.5 kg) irregular samples preserve magmatic, hydrothermal and structural relationships hitherto unseen because of the narrow diameter of drill core and previous poor core recovery. Including the ~60 m-thick zone of granoblastic dikes overlying the uppermost gabbro, the dike-gabbro transition zone at Site 1256 is over 170 m thick, of which more than 100 m are recrystallized granoblastic basalts. This zone records a dynamically evolving thermal boundary layer between the principally hydrothermal domain of the upper crust and a deeper zone of intrusive magmatism. The recovered samples document a sequence of evolving geological conditions and the intimate coupling between temporally and spatially intercalated intrusive, hydrothermal, contact-metamorphic, partial melting and retrogressive processes. Despite the operational challenges, we achieved a minor depth advance to 1522 m, but this was insufficient penetration to complete any of the primary objectives. However, Hole 1256D has been thoroughly cleared of junk and drill cuttings that have hampered operations during this and previous Expeditions. At the end of Expedition 335, we briefly resumed coring and stabilized problematic intervals with cement. Hole 1256D is open to its full depth and ready for further deepening in the near future.
InterRidge News

hal-00688821
https://hal.archives-ouvertes.fr/hal-00688821

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
In the Oman ophiolite crustal section, a contact zone between the gabbro unit and the volcanics and diabase sheeted dikes, called the root zone of the sheeted dike complex, has been recently mapped at a fine scale in a selected area. The Oman ophiolite is derived from a fast spreading ridge which had a melt lens located between the main gabbro unit and the root zone of the sheeted dike complex. With a few exceptions accounted for, this horizon has a fairly constant thickness, similar to 100 m, and a crude internal pseudo-stratigraphy. At the base of the root zone are isotropic ophitic gabbros interpreted as a thermal boundary layer. This layer is transitional between the magmatic system of the melt lens, convecting at 1200 degrees C, and a high-temperature (< 1100 degrees C) hydrothermal system, convecting within the root zone. Above this level, the isotropic gabbros have been, locally, largely molten due to an influx of seawater, at similar to 1100 degrees C, thus generating varitextured ophitic and pegmatitic gabbros. These latter gabbros constitute the upper part of the root zone and are associated with trondjhemitic intrusions as screens in the lower sheeted dikes. Diorites and trondjhemites were also generated by hydrous melting, at temperatures below 1000 degrees C. The whole root zone is a domain of very sharp average thermal gradient (similar to 7 degrees C/m). At the top of the root zone, a new thermal boundary layer, with diabase dikes hydrated in amphibolite facies conditions, separates the preceding high- temperature convective system from the well-known greenschist facies (< 450 degrees C) hydrothermal system operating throughout the sheeted dike complex, up to the seafloor. The isotropic gabbros near the base of the root zone are intruded by protodikes with distinctive microgranular margins and an ophitic center. Protodike swarms are exceptional because, intruding a medium at similar to 1100 degrees C, they are largely destroyed by dike-in-dike intrusions and by hydrous melting. However, they demonstrate that this zone was generated by melt conduits issued from the underlying melt lens. Each dike of the sheeted dike complex is thus fed by one protodike. As this zone has been recently drilled by IODP in the eastern Pacific Ocean, a brief comparison is proposed.
ISSN: 1525-2027

hal-00411331
https://hal.archives-ouvertes.fr/hal-00411331
DOI : 10.1029/2007GC001918

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : The Chile-Argentina Patagonian Cordillera is a natural laboratory to study the interactions between oceanic and continental lithosphere during the subduction of an active spreading ridge beneath a continent. Subduction of the South Chile spreading ridge, which separates the Nazca plate from the Antarctic plate, started around 15–14 Ma at the southern tip of Patagonia. Presently, the southernmost segment of the Chile Ridge enters the Peru-Chile trench at 46°S, at the site of the Chile Triple Junction (CTJ). We review the main events which occurred on land in the CTJ region (46–47°S), related with processes of ridge subduction. We summarize tectonic, sedimentary, and magmatic features in a 30 Ma-to Present chronological table. A preridge subduction stage, from 30 to 15 Ma, is characterized by the onset and growth of Patagonian relief and by a shift from marine to continental detrital sedimentation in the foreland at 20–22 Ma. The change from pre-ridge subduction to ridge subduction is marked on land by a transition from calc-alkaline to alkaline volcanism, at 14–12 Ma, and by the onset of eruption of very large fl ood basalt provinces (future volcanic plateaus) following rapid erosion of the eastern foreland belt. Post-plateau basaltic volcanism (<4 Ma) is coeval with a period of tectonic and morphological rejuvenation during which the eastern foreland of the Cordillera has been affected by extensional/transtensional tectonics. We place these events in the framework of a tectonomagmatic model involving the opening of slab windows due to both slab tear and ridge axis subduction.
Subduction Zone Geodynamics

hal-00421053
https://hal.archives-ouvertes.fr/hal-00421053
DOI : 10.1007/978-3-540-87974-9_12

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Chenaillet Ophiolite in the Franco-Italian Alps represents a well-exposed ocean-floor sequence that was only weakly overprinted by Alpine metamorphism during its emplacement in the Alpine nappe stack. Pillow lavas showing a Mid Ocean Ridge Basalt (MORB) signature overlie tectonically exhumed gabbros and serpentinized mantle rocks similar to oceanic core complexes (OCC) described from present-day slow- to ultraslow-spreading ridges. Based on detailed mapping it can be shown that: 1) syn-magmatic high-temperature shear zones are truncated by oceanic detachment faults; 2) sediments consisting exclusively of clasts derived from the footwall of the detachment are overlain by voluminous lavas, and 3) emplacement of lavas is linked with high-angle faulting that overprint the oceanic detachment fault. Based on stratigraphic and cross cutting relationships we conclude that: 1) a complex relation between high- and low-temperature shear zones exists, 2) oceanic detachment faults may be obliterated by later emplaced of MOR basalts, and 3) high-angle faults may serve at shallow levels as feeder channels for the overlying pillow basalts. These observations raise questions about the relative relations in time and space between magmatic, hydrothermal and tectonic processes at spreading systems. We propose that the observed change from exhumation along an oceanic detachment fault to high-angle faulting associated with extrusion of volcanic rocks may represent an evolution within a life cycle of a spreading system that may be comparable to present-day slow- to ultraslow-spreading ridges.
ISSN: 0024-4937

hal-00617678
https://hal.archives-ouvertes.fr/hal-00617678
DOI : 10.1016/j.lithos.2010.10.017

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
Peridotites exhumed in the footwall of axial detachment faults at slow-spreading ridges are highly serpentinized. Most mid-ocean ridge detachment settings are magmatically active and hydrous fluid circulation in and near the fault has been shown to be influenced by the presence of melt or magmatic lithologies. Our working area along the Southwest Indian Ridge (62–65°E) is nearly amagmatic and represents an end-member to study the hydrous alteration of exhumed peridotites without these magmatic influences. We use an integrated petrological approach combining microstructural, mineralogical and chemical observations to unravel the sequence of serpentinization in 272 dredged samples of variably serpentinized peridotites and to document the circulation of serpentinizing fluids in and near the exhumation faults. We find that serpentine recrystallization and veins overprint the initial serpentinite mesh texture in ∼25% of the samples. Oxygen isotope data suggest that this sequence developed at relatively high temperatures (271–336°C) and under increasing fluid–rock ratios, from near stoichiometry for mesh texture formation to >10 during recrystallization. Increasing fluid supersaturation relative to serpentine favors the replacement of mesh texture lizardite by chrysotile and polygonal or polyhedral serpentine. We attribute local recrystallization into antigorite to moderate Si-metasomatism, possibly following pyroxene serpentinization. We do not observe the more pronounced Si-metasomatism leading to talc replacing serpentine that is reported for the more magmatically active Mid-Atlantic Ridge detachment settings and is attributed to prior leaching of magmatic rocks. Scales of preferential fluid pathways in our samples evolved from pervasive and close-spaced (<500 µm) microfractures during the formation of the initial serpentine mesh texture, to centimeter-thick planar domains of enhanced fluid flux, spaced at ∼10 cm intervals and probably grouped in corridors that may be up to ∼100 m across. Serpentine minerals are enriched in some fluid-mobile elements (Cl, B, U) relative to the peridotite protolith, and several elements (Al, Fe, Si, Cu, As, Sb, REE) are redistributed at the millimeter to decimeter scale. Serpentinizing fluids were seawater-derived, probably mildly alkaline (small to no europium anomalies), reducing and H2-enriched (formation of magnetite). These fluids may have been similar to, though warmer than, those venting at the ultramafic-hosted Lost City hydrothermal fluid (30°N, Mid-Atlantic Ridge).
ISSN: 0022-3530

hal-01174047
https://hal.archives-ouvertes.fr/hal-01174047
DOI : 10.1093/petrology/egv014

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
Replenished axial melt lenses at fast-spreading mid-oceanic ridges may move upward and intrude into the overlying hydrothermally altered sheeted dikes, resulting in high-grade contact metamorphism with the potential to trigger anatexis in the roof rocks. Assumed products of this process are anatectic melts of felsic composition and granoblastic, two-pyroxene hornfels, representing the residue after partial melting. Integrated Ocean Drilling Program Expeditions 309, 312, and 335 at Site 1256 (eastern equatorial Pacific) sampled such a fossilized oceanic magma chamber. In this study, we simulated magma chamber roof rock anatectic processes by performing partial melting experiments using six different protoliths from the Site 1256 sheeted dike complex, spanning a lithological range from poorly to strongly altered basalts to partially or fully recrystallized granoblastic hornfels. Results show that extensively altered starting material lacking primary magmatic minerals cannot reproduce the chemistry of natural felsic rocks recovered in ridge environments, especially elements sensitive to hydrothermal alteration (e.g., K, Cl). Natural geochemical trends are reproduced through partial melting of moderately altered basalts from the lower sheeted dikes. Two-pyroxene hornfels, the assumed residue, were reproduced only at low melting degrees (<20 vol%). The overall amphibole absence in the experiments confirms the natural observation that amphibole is not produced during peak metamorphism. Comparing experimental products with the natural equivalents reveals that water activity (aH2O) was significantly reduced during anatectic processes, mainly based on lower melt aluminum oxide and lower plagioclase anorthite content at lower aH2O. High silica melt at the expected temperature (1000–1050 °C; peak thermal overprint of two-pyroxene hornfels) could only be reproduced in the experimental series performed at aH2O = 0.1.
ISSN: 0010-7999

hal-01174139
https://hal.archives-ouvertes.fr/hal-01174139
DOI : 10.1007/s00410-015-1136-5

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : We designed a thermo-mechanical numerical model for fast-spreading mid-ocean ridge with variable viscosity, hydrothermal cooling, latent heat release, sheeted dyke layer, and variable melt intrusion possibilities. The model allows for modulating several accretion possibilities such as the "gabbro glacier" (G), the "sheeted sills" (S) or the "mixed shallow and MTZ lenses" (M). These three crustal accretion modes have been explored assuming viscosity contrasts of 2 to 3 orders of magnitude between strong and weak phases and various hydrothermal cooling conditions depending on the cracking temperatures value. Mass conservation (stream-function), momentum (vorticity) and temperature equations are solved in 2-D cartesian geometry using 2-D, alternate direction, implicit and semi-implicit finite-difference scheme. In a first step, an Eulerian approach is used solving iteratively the motion and temperature equations until reaching steady states. With this procedure, the temperature patterns and motions that are obtained for the various crustal intrusion modes and hydrothermal cooling hypotheses display significant differences near the mid-ocean ridge axis. In a second step, a Lagrangian approach is used, recording the thermal histories and cooling rates of tracers travelling from the ridge axis to their final emplacements in the crust far from the mid-ocean ridge axis. The results show that the tracer's thermal histories are depending on the temperature patterns and the crustal accretion modes near the mid-ocean ridge axis. The instantaneous cooling rates obtained from these thermal histories betray these discrepancies and might therefore be used to characterize the crustal accretion mode at the ridge axis. These deciphering effects are even more pronounced if we consider the average cooling rates occurring over a prescribed temperature range. Two situations were tested at 1275-1125 °C and 1050-850 °C. The first temperature range covers mainly the crystallization range that is characteristic of the high temperature areas in the model (i.e. the near-mid-oceanic-ridge axis). The second temperature range corresponds to areas in the model where the motion is mainly laminar and the vertical temperature profiles are closer to conductive. Thus, this situation results in less discriminating efficiency among the crustal accretion modes since the thermal and dynamic properties that are described are common to all the crustal accretion modes far from the ridge axis. The results show that numerical modeling of thermo-mechanical properties of the lower crusts may bring useful information to characterize the ridge accretion structure, hydrothermal cooling and thermal state at the fast-spreading ridges and may open discussions with petrological cooling rate results.
ISSN: 1991-959X

hal-00907012
https://hal.archives-ouvertes.fr/hal-00907012
DOI : 10.5194/gmd-6-1659-2013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tethyan ophiolites show an apparent poorly organized association of ultramafic andmafic rocks. By contrast tothe complete mantle-crustal sections of Semail-type ophiolite sheets, Tethyan ophiolites are characterized by asmaller amount of mafic rocks (gabbros and basalts), by the absence of any sheeted dyke complex and by thefrequent occurrence of oceanic sediments stratigraphically overlying mantle-derived peridotites and associatedgabbroic intrusions. Therefore, they are considered as typical remnants of oceanic lithosphere formed in slowspreadingenvironment or in ocean–continent transition at distal passive margins. In the very first models offormation of the Tethyan ophiolites, in the years 1980, the geodynamical processes leading to mantle unroofingwere poorly understood due to the paucity of data and concepts available at that time from the present-dayoceans. In particular, at that time, little work had focused on the distribution, origin and significance ofmafic rocks with respect to the dominant surrounding ultramafics. Here, we reconsider the geology of sometypical metaophiolites from the Western Alps and Corsica, and we show how results from the past decadeobtained in the current oceans ask for reassessing the significance of the Tethyan ophiolites in general. Revisitedexamples include a set of representative metaophiolites from the blueschists units of the Western Alps (Queyrasregion) and from Alpine Corsica (Golo Valley). Field relationships between the ophiolitic basement andthe metasedimentary/metavolcanic oceanic cover are described, outlining a typical character of the Tethyanophiolite lithological associations. Jurassic marbles and polymictic ophiolite metabreccias are unconformablyoverlying the mantle-gabbo basement, in a way strictly similar to what is observed in the non-metamorphicAppennine ophiolites or Chenaillet massif. This confirms that very early tectonic juxtaposition of ultramafic andmafic rocks occurred in the oceanic domain before subduction. This juxtaposition resulted from tectonic activitythat is now assigned to the development of detachment faults and to the formation of Oceanic Core Complexes(OCCs) at the axis of slow spreading ridges. This fundamental Plate Tectonics process is responsible for the exhumationand for the axial denudation of mantle rocks and gabbros at diverging plate boundaries. In addition, fieldrelationships between the discontinuous basaltic formations and the ultramafic–mafic basement indicate that thistectonic stage is followed or not by a volcanic stage.We discuss this issue in the light of available field constraints.
ISSN: 0012-8252

insu-01096467
https://hal-insu.archives-ouvertes.fr/insu-01096467
https://hal-insu.archives-ouvertes.fr/insu-01096467/document
https://hal-insu.archives-ouvertes.fr/insu-01096467/file/Lagabrielle-EarthSciRev-2014.pdf
DOI : 10.1016/j.earscirev.2014.11.004

Éditeur(s) : American Geophysical Union
Résumé : We present four companion digital models of the age, age uncertainty, spreading rates, and spreading asymmetries of the world's ocean basins as geographic and Mercator grids with 2 arc min resolution. The grids include data from all the major ocean basins as well as detailed reconstructions of back-arc basins. The age, spreading rate, and asymmetry at each grid node are determined by linear interpolation between adjacent seafloor isochrons in the direction of spreading. Ages for ocean floor between the oldest identified magnetic anomalies and continental crust are interpolated by geological estimates of the ages of passive continental margin segments. The age uncertainties for grid cells coinciding with marine magnetic anomaly identifications, observed or rotated to their conjugate ridge flanks, are based on the difference between gridded age and observed age. The uncertainties are also a function of the distance of a given grid cell to the nearest age observation and the proximity to fracture zones or other age discontinuities. Asymmetries in crustal accretion appear to be frequently related to asthenospheric flow from mantle plumes to spreading ridges, resulting in ridge jumps toward hot spots. We also use the new age grid to compute global residual basement depth grids from the difference between observed oceanic basement depth and predicted depth using three alternative age-depth relationships. The new set of grids helps to investigate prominent negative depth anomalies, which may be alternatively related to subducted slab material descending in the mantle or to asthenospheric flow. A combination of our digital grids and the associated relative and absolute plate motion model with seismic tomography and mantle convection model outputs represents a valuable set of tools to investigate geodynamic problems.
Geochemistry Geophysics Geosystems - G3 (1525-2027) (American Geophysical Union), 2008-04 , Vol. 9 , P. NIL_18-NIL_36

Droits : 2008 American Geophysical Union
http://archimer.ifremer.fr/doc/2008/publication-3900.pdf
DOI:10.1029/2007GC001743
http://archimer.ifremer.fr/doc/00000/3900/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : Mid-ocean ridges magmatism is, by and large, considered to be mostly dry. Nevertheless, numerous works in the last decade have shown that a hydrous component is likely to be involved in ocean ridges magmas genesis and/or evolution. The petrology and geochemistry of peculiar coarse grained gabbros sampled in the upper part of the gabbroic sequence from the northern Oman ophiolite (Wadi Rajmi) provide information on the origin and fate of hydrous melts in fast-spreading oceanic settings. Uncommon crystallization sequences for oceanic settings (clinopyroxene crystallizing before plagioclase), extreme mineral compositions (plagioclase An% up to 99, and clinopyroxene Mg # up to 96), and the presence of magmatic amphibole, imply the presence of a high water activity during crystallization. Various petrological and geochemical constraints point to hydration, resulting from the recycling of hydrothermal fluids. This recycling event may have occurred at the top of the axial magma chamber where assimilation of anatectic hydrous melts is recurrent along mid-ocean ridges or close to segments ends where fresh magma intrudes previously hydrothermally altered crust. In ophiolitic settings, hydration and remelting of hydrothermally altered rocks producing hydrous melts may also occur during the obduction process. Although dry magmatism dominates oceanic magmatism, the dynamic behavior of fast-spreading ocean ridge magma chambers has the potential to produce the observed hydrous melts (either in ophiolites or at spreading centers), which are thus part of the general mid-ocean ridges lineage.
ISSN: 1525-2027

hal-00939400
https://hal.archives-ouvertes.fr/hal-00939400
DOI : 10.1002/ggge.20137

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
The Lanzo peridotite massif is a fragment of oceanic lithosphere generated in an ocean-continent transition context and eclogitized during alpine collision. Despite the subduction history, the massif has preserved its sedimentary oceanic cover, suggesting that it may have preserved its oceanic structure. It is an exceptional case for studying the evolution of a fragment of the lithosphere from its oceanization to its subduction and then exhumation. We present a field and petrological study retracing the different serpentinization episodes and their impact on the massif structure. The Lanzo massif is composed of slightly serpentinized peridotites (<20% serpentinization) surrounded by an envelope of foliated serpentinites (100% serpentinization) bordered by oceanic metabasalts and metasedimentary rocks. The limit between peridotites and serpentinites defines the front of serpentinization. This limit is sharp: it is marked by the presence of massive serpentinites (80% serpentinization) and, locally, by dykes of metagabbros and mylonitic gabbros. The deformation of these gabbros is contemporaneous with the emplacement of the magma. The presence of early lizardite in the peridotites testifies that serpentinization began during the oceanization, which is confirmed by the presence of meta-ophicarbonates bordering the foliated serpentinite envelope. Two additional generations of serpentine occur in the ultramafic rocks. The first is a prograde antigorite that partially replaced the lizardite and the relict primary minerals of the peridotite during subduction, indicating that serpentinization is an active process at the ridge and in the subduction zone. Locally, this episode is followed by the deserpentinization of antigorite at peak P-T (estimated in eclogitized metagabbros at 2-2.5 GPa and 550-620 °C): it is marked by the crystallization of secondary olivine associated with chlorite and/or antigorite and of clinopyroxene, amphibole and chlorite assemblages. A second antigorite formed during exhumation partially to completely obliterating previous textures in the massive and foliated serpentinites. Serpentinites are an important component of the oceanic lithosphere generated in slow to ultraslow spreading settings, and in these settings, there is a serpentinization gradient with depth in the upper mantle. The seismic Moho limit could correspond to a serpentinization front affecting the mantle. This partially serpentinized zone constitutes a less competent level where, during subduction and exhumation, deformation and fluid circulation are localized. In this zone, the reaction kinetics are increased and the later steps of serpentinization obliterate the evidence of this progressive zone of serpentinization. In the Lanzo massif, this zone fully recrystallized into serpentinite during alpine subduction and collision. Thus, the serpentinite envelope represents the oceanic crust as defined by geophysicists, and the sharp front of serpentinization corresponds to an eclogitized seismic palaeo-Moho.
ISSN: 0263-4929

hal-00823051
https://hal.archives-ouvertes.fr/hal-00823051
DOI : 10.1111/jmg.12008

Éditeur(s) : HAL CCSD
Résumé : This historical perspective provides an overall view of the main steps that led to the acceptance of the concept of mantle exhumation accompanying lithosphere stretching and extreme crustal thinning. We first remember that the presence of exposures of mantle rocks along oceanic spreading ridges was early reported in the 60's due to the results of sediment cores and dredge hauls collected along the Mid-Atlantic Ridge. In the meantime, detailed analysis of the relationships between oceanic sediments of Late Jurassic age and their primary basement in the Apennine ophiolites led many authors to point to the importance of exhumation of mantle rocks on ancient seafloors. By contrast to the thick sections of classical ophiolites (e.g. Oman), the Alpine-Corsican-Appennine ophiolites are characterized by a relatively small amount of mafic rocks (gabbros and basalts), by the absence of any sheeted dyke complex and by the frequent occurrence of oceanic sediments stratigraphically overlying mantle-derived peridotites and associated gabbroic intrusions. They display some of the characteristics of slow-spreading ridge systems, but, due to their highly tectonized character, they have been interpreted successively either as remnants of oceanic fracture zones of normal ocean or as remnants of very-poorly organized, abnormal oceanic basement. This review shows how the concept of mantle exhumation has been elaborated more or less in the same period both by marine geoscientists and by geologists conducting investigations in ophiolitic units of the Alps-Apennines mountain belt. Dredging and diving results from the Gorringe Bank, the Iberia margin, the Thyrrenian Sea and the Central Atlantic in the 1980's and 1990's provided additional proofs that the mantle is currently exhumed in various oceanic environments, including distal continental margins, back-arc basins and slow-spreading ridges of wide oceans. It is shown finally how renewed cross-information from mountain belts and the oceans, multiplying the examples of sedimentary reworking of mantle material, help better constrain the mechanisms of mantle exhumation. This mechanism progressively appeared as a fundamental step during the processes of extension of both continental and oceanic lithospheres in numerous geological situations worldwide.
Bollettino della Società Geologica Italiana

hal-00475653
https://hal.archives-ouvertes.fr/hal-00475653
DOI : 10.3301/IJG.2009.128.2.279

Éditeur(s) : Gauthier-villars
Résumé : 69 new hydrothermal sites were discovered during the Naudur diving cruise. Dives were conducted between 17 degrees 5 and 18 degrees 40'5 on four segments showing marked contrast in morphology, volcanic, tectonic and hydrothermal activity. At 17 degrees 10'5, 17 degrees 25'5 and 18 degrees 37'5 the ridge has a dome shaped cross-section and is dominated by very active volcanic activity. Early widespread low temperature (<50 degrees C) diffuse hydrothermal discharge is followed by focused high temperature black smokers. At 18 degrees 15'S tectonic activity is dominant, no recent lava was observed, and only two of the 20 hydrothermal sites are active. At 18 degrees 32'5 recent lava representing a new volcanic episode partly covers the bottom of the graben. Deep hydrothermal convection is reactivated with new black smokers along the graben wall. Also, there is low temperature shimmering water from cooling lava flows. These three segments can be considered as successive volcanic/tectonic episodes typical of a fast spreading ridge. Further, the observations support a new model for the temporal evolution of episodic hydrothermal activity. Hydrothermal convection is unstable and superficial during the volcanic stage (dykes injection). At the beginning of the teaonic stage (graben formation) faults allow deep circulation and hot fluid to reach the surface. As the graben widens hydrothermal activity is less important and may cease. The heat of a new volcanic episode reactivates the deep hot water circulation along the graben faults completing a cycle.
69 nouveaux sites hydrothermaux ont été découverts entre 17'5 et 18'40'5 sur quatre segments présentant des activités volcaniques et tectoniques contrastées. A 17°10'S,17025'S et 18'37'5, la ride forme un dôme et l'activité volcanique est dominante. Les émissions hydrothermales sont d'abord diffuses et de basse température, puis focalisées et de haute température. A 18°15'S la majorité des sites hydrothermaux sont inactifs dans un graben axial dépourvu de laves récentes. A 18'32'5, des laves récentes s'épanchent au fond du graben. Les circuits hydrothermaux réactivés par le nouvel épisode volcanique se traduisent par des diffusions sur les laves récentes et par une reprise des émissions de haute température le long des murs du graben. Ces quatre segments traduisent des épisodes volcanoltectoniques successifs, caractéristiques de I'évolution temporelle des dorsales rapides. Les observations permettent de proposer un nouveau modèle de l'activité hydrothermale. Les circuits hydrothermaux sont diffus, peu structurés, instables et superficiels durant les épisodes volcaniques. Au début des épisodes tectoniques, les failles du graben drainent les fluides chauds en profondeur, puis lorsque le graben s'élargit, l'activité s'interrompt. La reprise de l'activité volcanique réamorce les circulations profondes le long des failles du graben.
Comptes Rendus de l'Academie des Sciences Serie II (1251-8069) (Gauthier-villars), 1994-12 , Vol. 319 , N. 11 , P. 1399-1406

Droits : Académie des Sciences
http://archimer.ifremer.fr/doc/00183/29455/27889.pdf
http://archimer.ifremer.fr/doc/00183/29455/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Oman ophiolite is regarded as derived from a fast spreading oceanic ridge. As in its present-day marine analogs, expectedly, the gabbro unit crystallized in a large magma chamber underneath a small melt lens. In ophiolites, this melt lens is reduced to a horizon mapped in the field, where the floor and the roof of the melt lens joined. The magmatic activity of the former melt lens has been studied in gabbros located below the melt lens horizon. Beneath a stable melt lens, gabbros subside and drift through the steep walls of the magma chamber as steeply foliated gabbros. In contrast, in unstable melt lenses more specifically considered here, flat-lying gabbros are exposed beneath the lens. These gabbros were settling on the floor while the melt lens was retreating. Their strong magmatic foliations and lineations point to a dynamic deposition on the floor, and lineation trends record the structure of convection rolls within the lens. Time constraints suggest a similar to 100 year periodicity of melt recharge by short and powerful melt pulses followed by a shorter time of convection activity after recharge and a longer period of static magma settling, as recently proposed for the East Pacific Rise. At each new melt pulse, the lens nearly doubles its volume by surface expansion, within a short time lapse, before slowly and progressively retreating to feed crustal accretion. Large horizontal surface inflation of the lens better explains the seawater hydration of the accreting crust than melt lens vertical motion through the lid.
ISSN: 0148-0227

hal-00617452
https://hal.archives-ouvertes.fr/hal-00617452
DOI : 10.1029/2010JB007934

Éditeur(s) : HAL CCSD
Résumé : The northern Mirdita ophiolite massifs in Albanian Dinarides formed at a slow-spreading ridge, active during the Jurassic (160–165 Ma). They share a common horizontal Jurassic–Lower Cretaceous sedimentary cover showing that they were not deeply and intrinsically affected by later Alpine thrusting. The western massifs of Mirdita, first oceanic core complex (OCC) and detachment shear zone described in ophiolites, compare with OCCs in slow-spreading ridges and provide continuous exposure of the deep internal structure of this system, revealing its kinematics, thanks to detailed structural mapping in peridotites and gabbros. The Mirdita detachments root in the Moho transition zone (MTZ), a weak zone at the top of asthenospheric mantle, where basaltic melts impregnate dunites. The OCC domes are plagioclase-amphibole–bearing mylonitic peridotites, ∼400 m thick, grading downward within 200 m to harzburgitic mantle. The mylonitic detachments crossed Moho beneath a NNE-SSW–trending ridge. On the western side of OCC domes, the hanging wall of the ridge, crustal gabbros, and basalts are still preserved, despite being deeply affected by hydrothermal alteration. From there, the partially molten MTZ was detached as a shear zone, mixing with lower gabbros. The OCC emerged, migrating upsection and eastward over 5 km. Finally, the OCC front is observed in hornblende-rich syntectonic mylonites derived from upper gabbros and from the overlying former lid. Serpentinization is static within these mylonites. A low-temperature detachment fault is expressed as a sheared antigoritic mélange at the margin of the mylonitic shear zone. Asthenospheric flow in the harzburgitic mantle beneath the ridge of origin has been preserved below the OCC rooting. The dominant asthenospheric flow direction trends parallel to the ridge axis. This mantle flow rotates over 200 m into the low-temperature mylonitic detachments, where OCC motion turns transversal to the ridge. Crystal preferred orientation measurements on six samples point to brown hornblende crystal growth during mylonitic flow and illustrate the change of olivine intra-crystalline slip system in mylonites compared to porphyroclastic harzburgite.
ISSN: 1553-040X

hal-01504440
https://hal.archives-ouvertes.fr/hal-01504440
DOI : 10.1130/GES01383.1

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition between the small melt lens observed on top of fast spreading ridge magma chambers and the overlying sheeted dike complex marks the interface between magma and the hydrothermal convective system. It is therefore critical to our understanding of fast spreading ridge accretion processes. We present maps of two areas of the Oman ophiolite where this transition zone is observed as continuous outcrops. Our observations, which include the base of the sheeted dike being crosscut by gabbros, are consistent with episodic dike injections in a steady state model but also suggest that the root of these dikes is commonly erased by vertical movements of the top of the melt lens. Dike assimilation is a possible mechanism for incorporating hydrated phases, which result from hydrothermal alteration, to the melt lens during upward migrations of its upper boundary. Upward migrations are also responsible for a granoblastic overprint of the root of the dikes that is also observed in the stoped diabase xenoliths. This granoblastic overprint attests to reheating of previously hydrothermally altered lithologies which can even trigger hydrous partial melting due to the lowering of the solidus of mafic lithologies by the presence of a water activity. Clinopyroxenes present in these granoblastic lithologies are typically low in Ti and Al content, thus strongly contrasting with corresponding magmatic clinopyroxene. This may attest to the recrystallization of clinopyroxenes after amphiboles under the peculiar conditions present at the root zone of the sheeted dike complex. Downward migrations of the top of the melt lens result in the crystallization of the isotropic gabbros at its roof, which represent the partly fossilized melt lens. Melt lens fossilization eventually occurs when magma supply is stopped or at the melt lens margins where the thermal conditions become cooler. Melt lens migration, recrystallization of hydrothermally altered sheeted dikes during reheating stages, and assimilation processes observed in the Oman ophiolite are consistent with the observations made in IODP Hole 1256D. We propose a general dynamic model in which the melt lens at fast spreading ridges undergoes upward and downward movements as a result of either eruption/replenishment stages or variations in the hydrothermal/magmatic fluxes.
ISSN: 1525-2027

hal-00445249
https://hal.archives-ouvertes.fr/hal-00445249
DOI : 10.1029/2009GC002652

Éditeur(s) : HAL CCSD
Résumé : This PhD work is based on field, petrographic, and geochemical observations of rocks originated at the base of the sheeted dike complex, in the Oman ophiolite and at IODP Site 1256, coupled with an experimental study. It provides new constrains on processes that occur at the magma / hydrothermal system transition in oceanic crust formed at fast spreading ridges. The base of the sheeted dike complex is truncated by intrusive isotropic gabbros, and therefore reheated and recrystallized to the "granoblastic dikes" under temperatures up to 1030°C. Xenoliths of granoblastic microgabbros and microgabbronorites derived from the granoblastic dikes are commonly observed in the about 100 meters thick horizon of isotropic gabbro that underlies the sheeted dike complex. These features can be explained by upward migrations of the melt lens that is present at fast spreading centers. The occurrence of several assimilation features (xenoliths and granoblastic patches) in the isotropic gabbro horizon supports the hypothesis that this horizon represents the fossilization of the upper melt lens. The experimental study was designed to simulate experimentally the effect of partial melting of hydrothermally altered sheeted dikes. The results show that melting starts at 850°C, confirm the residual origin of granoblastic dikes and xenoliths, and attest to the anatectic origin of the oceanic plagiogranites that are commonly present close to the base of the sheeted dike complex. The major and trace element composition of the experimental anatectic melt that represents the main contaminant for primitive MORBs at fast spreading ridges has been determined. The upper axial melt lens at fast spreading mid-ocean ridges is herein described as a dynamic system that can migrate vertically, and which fossilizes when moving off-axis.
Ce travail de thèse est basé sur des observations de terrain, sur une étude pétrographique et géochimique des roches formées à la base du complexe filonien dans l'ophiolite d'Oman et au niveau du Site IODP 1256, ainsi que sur une étude expérimentale. De nouvelles contraintes sont apportées sur les processus se produisant à la transition magma / système hydrothermal dans la croute océanique formée au niveau des dorsales à expansion rapide. L'intrusion de gabbros isotropes dans la base du complexe filonien a provoqué son réchauffement et sa recrystallization en « dikes granoblastiques » jusqu'à des températures de 1030°C. Des xénolites de microgabbro à orthopyroxene dérivées des dikes granoblastiques sont souvent observées dans le niveau de gabbros isotropes épais de 100 mètres environ qui est présent à la base du complexe filonien. Ces différentes caractéristiques sont à relier à des migrations verticales vers le haut du sommet de la lentille magmatique supérieure qui est observée aux dorsales rapides. Les nombreuses évidences d'assimilation (xénolites et patchs granoblastiques) dans le niveau des gabbros isotropes appuient l'hypothèse que ce niveau représente la fossilisation de la lentille magmatique supérieure. L'étude expérimentale a consisté à tester l'effet de la fusion partielle du complexe filonien préalablement hydrothermalisé. Les résultats montrent que la fusion commence à 850°C, confirment l'origine résiduelle des dikes granoblastiques et des xénolites associées, et attestent de l'origine anatectique des plagiogranites océaniques qui sont couramment observés à proximité de la base du complexe filonien. La composition en éléments majeurs et traces du liquide anatectique a été déterminée. Ce liquide représente le principal contaminant pour les MORBs primitifs émis au niveau des dorsales rapides. La lentille magmatique supérieure présente au niveau des dorsales médio-océaniques à expansion rapide est ici décrite comme un système dynamique qui peut migrer verticalement, et qui est fossilisée lorsqu'elle se déplace hors axe.
https://tel.archives-ouvertes.fr/tel-00448699

tel-00448699
https://tel.archives-ouvertes.fr/tel-00448699
https://tel.archives-ouvertes.fr/tel-00448699/document
https://tel.archives-ouvertes.fr/tel-00448699/file/France_2009_PhD.pdf