Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The decay of 187Re to 187Os provides a unique tracer of recycled lithosphere in the Earth's upper mantle, and the radiogenic Os isotope compositions of many mid-ocean ridge basalts (MORB) have been taken to indicate the presence of recycled oceanic crust in the mantle source. However, others have attributed the data to contamination by seawater or an age effect (due to 187Re decay following igneous crystallisation). This study presents new Re Os, U Th Ra and B isotope data for normal-MORB (N-MORB) glass (including 18 samples analysed previously). The scale of the variation in 187Os/188Os observed here in N-MORB glass ranges from 0.126 to 0.148, with a mean value of 0.133 ± 0.009 (2?). Previously published Os isotope data for MORB is shown to have been affected by an analytical artefact, and in particular the very radiogenic Os isotope compositions reported earlier are now shown not to exist. Nevertheless, some radiogenic Os isotope compositions are still seen in the data obtained here. Coupled Th and Ra excesses appear to rule out an age effect, at least, for those samples studied, however, ?11B covariations with 187Os/188Os are consistent with the assimilation of older oceanic crust (affected by seawater contamination). Individual sulphides (less likely to be affected by such contamination) are always less radiogenic than their glass host, with 187Os/188Os values ranging from 0.123 to 0.131. This indicates that sulphide precipitation occurred prior to contamination of the surrounding melt, but the data also suggest that low-Os sulphides have been affected by contamination through partial equilibration with that melt. Taken together, these indicate that dominant process responsible for the radiogenic Os isotope compositions of N-MORB glass is contamination by older oceanic crust. Although the influence of age effects and the presence of recycled material cannot be completely ruled out, Os-rich sulphides yield sub-chondritic Os isotope compositions which point rather to a long-term depletion in Re in the MORB source likely to have resulted from formation of the continental crust over much of Earth's history.
ISSN: 0012-821X

hal-00320075
https://hal.archives-ouvertes.fr/hal-00320075
DOI : 10.1016/J.EPSL.2007.05.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mid-ocean ridge basalts (MORBs) are the most abundant magmas produced on Earth. They are widely studied to infer mantle compositions and melting processes. However, MORB liquids are also the complex end-product of a variety of intra-crustal processes such as partial or fractional crystallization, melt–rock interaction, and contamination. Deciphering the relative contribution of these different processes is of first-order importance. Contamination at ocean crustal levels is likely, and may occur at magma chamber margins where fresh magmas can interact with previously hydrothermally altered rocks. Characterizing the composition of this crustal contaminant component is critical if we are to understand the relative importance of each component in the resulting MORB liquid.Here we present the results of experiments designed to reproduce the processes occurring at oceanic magma chamber roofs, where crustal contamination should be most extensive, by melting a representative sample of the sheeted dike complex. Anatectic melts thus produced are likely to represent the principal crustal contaminant in MORB. These melts were characterized for major and trace elements, showing B, Zr, Hf, and U enrichment, and Sr, Ti, and V depletion relative to original MORB liquids. In comparison to the starting material, relative element fractionations are observed in the anatectic melts, with enrichments of: U relative to Ba, Nb, and Th; LREE and MREE relative to Sr; and Zr–Hf relative to LREE. Bulk partition coefficients for element partitioning during magma chamber roof anatexis are derived and proposed as valuable tools for tracking MORB contamination.Comparison with natural samples from the East Pacific Rise and the Oman ophiolite shows that anatectic melts can crystallize in situ to form oceanic plagiogranite intrusions, and that residual assemblages associated with the hydrous partial melting stage are represented by hornfelsic dikes and enclaves (also named granoblastic basalts). We now recognize these as commonplace at the root of the sheeted dike complex both at present-day and fossil oceanic spreading centers.
ISSN: 0024-4937

hal-01115500
https://hal.archives-ouvertes.fr/hal-01115500
DOI : 10.1016/j.lithos.2014.05.018

Éditeur(s) : HAL CCSD
Résumé : This PhD work is based on field, petrographic, and geochemical observations of rocks originated at the base of the sheeted dike complex, in the Oman ophiolite and at IODP Site 1256, coupled with an experimental study. It provides new constrains on processes that occur at the magma / hydrothermal system transition in oceanic crust formed at fast spreading ridges. The base of the sheeted dike complex is truncated by intrusive isotropic gabbros, and therefore reheated and recrystallized to the "granoblastic dikes" under temperatures up to 1030°C. Xenoliths of granoblastic microgabbros and microgabbronorites derived from the granoblastic dikes are commonly observed in the about 100 meters thick horizon of isotropic gabbro that underlies the sheeted dike complex. These features can be explained by upward migrations of the melt lens that is present at fast spreading centers. The occurrence of several assimilation features (xenoliths and granoblastic patches) in the isotropic gabbro horizon supports the hypothesis that this horizon represents the fossilization of the upper melt lens. The experimental study was designed to simulate experimentally the effect of partial melting of hydrothermally altered sheeted dikes. The results show that melting starts at 850°C, confirm the residual origin of granoblastic dikes and xenoliths, and attest to the anatectic origin of the oceanic plagiogranites that are commonly present close to the base of the sheeted dike complex. The major and trace element composition of the experimental anatectic melt that represents the main contaminant for primitive MORBs at fast spreading ridges has been determined. The upper axial melt lens at fast spreading mid-ocean ridges is herein described as a dynamic system that can migrate vertically, and which fossilizes when moving off-axis.
Ce travail de thèse est basé sur des observations de terrain, sur une étude pétrographique et géochimique des roches formées à la base du complexe filonien dans l'ophiolite d'Oman et au niveau du Site IODP 1256, ainsi que sur une étude expérimentale. De nouvelles contraintes sont apportées sur les processus se produisant à la transition magma / système hydrothermal dans la croute océanique formée au niveau des dorsales à expansion rapide. L'intrusion de gabbros isotropes dans la base du complexe filonien a provoqué son réchauffement et sa recrystallization en « dikes granoblastiques » jusqu'à des températures de 1030°C. Des xénolites de microgabbro à orthopyroxene dérivées des dikes granoblastiques sont souvent observées dans le niveau de gabbros isotropes épais de 100 mètres environ qui est présent à la base du complexe filonien. Ces différentes caractéristiques sont à relier à des migrations verticales vers le haut du sommet de la lentille magmatique supérieure qui est observée aux dorsales rapides. Les nombreuses évidences d'assimilation (xénolites et patchs granoblastiques) dans le niveau des gabbros isotropes appuient l'hypothèse que ce niveau représente la fossilisation de la lentille magmatique supérieure. L'étude expérimentale a consisté à tester l'effet de la fusion partielle du complexe filonien préalablement hydrothermalisé. Les résultats montrent que la fusion commence à 850°C, confirment l'origine résiduelle des dikes granoblastiques et des xénolites associées, et attestent de l'origine anatectique des plagiogranites océaniques qui sont couramment observés à proximité de la base du complexe filonien. La composition en éléments majeurs et traces du liquide anatectique a été déterminée. Ce liquide représente le principal contaminant pour les MORBs primitifs émis au niveau des dorsales rapides. La lentille magmatique supérieure présente au niveau des dorsales médio-océaniques à expansion rapide est ici décrite comme un système dynamique qui peut migrer verticalement, et qui est fossilisée lorsqu'elle se déplace hors axe.
https://tel.archives-ouvertes.fr/tel-00448699

tel-00448699
https://tel.archives-ouvertes.fr/tel-00448699
https://tel.archives-ouvertes.fr/tel-00448699/document
https://tel.archives-ouvertes.fr/tel-00448699/file/France_2009_PhD.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
In ophiolites and in present-day oceanic crust formed at fast spreading ridges, oceanic plagiogranites are commonly observed at, or close to the base of the sheeted dike complex. They can be produced either by differentiation of mafic melts, or by hydrous partial melting of the hydrothermally altered sheeted dikes. In addition, the hydrothermally altered base of the sheeted dike complex, which is often infiltrated by plagiogranitic veins, is usually recrystallized into granoblastic dikes that are commonly interpreted as a result of prograde granulitic metamorphism. To test the anatectic origin of oceanic plagiogranites, we performed melting experiments on a natural hydrothermally altered dike, under conditions that match those prevailing at the base of the sheeted dike complex. All generated melts are water saturated, transitional between tholeiitic and calc-alkaline, and match the compositions of oceanic plagiogranites observed close to the base of the sheeted dike complex. Newly crystallized clinopyroxene and plagioclase have compositions that are characteristic of the same minerals in granoblastic dikes. Published silicic melt compositions obtained in classical MORB fractionation experiments also broadly match the compositions of oceanic plagiogranites; however, the compositions of the coexisting experimental minerals significantly deviate from those of the granoblastic dikes. Our results demonstrate that hydrous partial melting is a likely common process in the root zone of the sheeted dike complex, starting at temperatures exceeding 850A degrees C. The newly formed melt can either crystallize to form oceanic plagiogranites or may be recycled within the melt lens resulting in hybridized and contaminated MORB melts. It represents the main MORB crustal contamination process. The residue after the partial melting event is represented by the granoblastic dikes. Our results support a model with a dynamic melt lens that has the potential to trigger hydrous partial melting reactions in the previously hydrothermally altered sheeted dikes. A new thermometer using the Al content of clinopyroxene is also elaborated.
ISSN: 0010-7999

hal-00534058
https://hal.archives-ouvertes.fr/hal-00534058
DOI : 10.1007/s00410-010-0502-6

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : National audience
Late Triassic submarine alkali basalts and hawaiites were collected from two superimposed tectonic slices belonging to the Kara Dere – Sayrun unit of the Middle Antalya nappes, southwestern Turkey. New determinations on conodont faunas allow to date this sequence to the Lower Carnian (Julian). The volcanic rocks show rather homogeneous compositions, with high TiO2 and relatively low MgO and Ni contents which suggest olivine fractionation. Their primitive mantle-normalised multi-elements plots show Nb and Ta enrichments relative to La, Pb negative anomalies and heavy rare earth element and Y depletions typical of intraplate ocean island basalts. These characteristics are consistent with the major and trace element compositions of their primary clinopyroxene phenocrysts, which do not show any feature ascribable to crustal contamination. The studied lavas display a restricted range of {varepsilon}Nd (+4.6 to +5.2) which falls within the range of ocean island basalts. Their initial (143Nd/144Nd)i ratios are too low to be explained by a simple mixing line between depleted MORB mantle (DMM) and HIMU components. Their Pb and Nd isotopic compositions plot along a mixing line between HIMU component and an enriched mantle, the composition of which could be the result of the addition of about 5 to 8% of an EM2 component (recycled marine sediments) to DMM. The lack of evidence for any continental crustal component in their genesis could be consistent with their emplacement in an intra-oceanic setting.
EISSN: 1777-5817

insu-00338829
https://hal-insu.archives-ouvertes.fr/insu-00338829
DOI : 10.2113/gssgfbull.179.4.397

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The ODP/IODP multileg campaign at ODP Site 1256 (Cocos plate, eastern equatorial Pacific) provides the first continuous in situ sampling of fast spreading ocean crust from the extrusive lavas, through the sheeted dikes and down into the uppermost gabbros. This paper focuses on a detailed petrographic and microanalytical investigation of the gabbro section drilled during IODP Expedition 312. The marked patchy and spotty features that can be observed in many Hole 1256D gabbros is mostly due to a close association of two different lithological domains in variable amounts: (1) subophitic domains and (2) a granular matrix. Major and trace element mineral compositions, geothermometry, and petrological modeling suggest that subophitic and granular domains follow one single magma evolution trend formed by in situ fractionation. The subophitic domains correspond to the relative primitive, high-temperature end-member, compositionally similar to the basalts and dikes from the extrusive unit upsection, while the granular domains fit with a magma evolution by crystal fractionation to lower temperatures, up to a degree of crystallization of similar to 80%. Our results support the following scenario for the fossilization of the axial melt lens at ODP Site 1256: relatively primitive MORB melts under near-liquidus conditions fill the melt lens and feed the upper, extrusive crust. Near the melt lens-sheeted dike boundary at lower temperatures, crystallization starts with first plagioclase before clinopyroxene in a mushy zone forming the subophitic domains. At decreasing temperatures, the subophitic domains continue to crystallize, finally forming a well-connected framework. Evolved, residual melt is finally trapped within the subophitic network, crystallizing at near-solidus conditions to the granular matrix. Another important textural feature in Hole 1256D gabbros is the presence of microgranular domains which are interpreted as relics of stoped/assimilated sheeted dikes (transformed to "granoblastic dikes" by contact metamorphism). All these different domains can be observed in close association, often at the thin section scale, demonstrating the extremely complex petrological record of combined crystallization/assimilation processes ongoing in the axial melt lens. Very similar gabbros with a marked spotty/patchy appearance, and bearing the same close association of lithological domains as observed at Site 1256, are known in the so-called "varitextured gabbro" unit from the Oman Ophiolite located at the same structural level, between cumulate gabbros and granoblastic dikes. The close petrological similarity of the gabbro/dike transition between both IODP Hole 1256D and the Oman ophiolite suggests that in situ fractionation and dike assimilation/contamination are major magmatic processes controlling the dynamics and fossilization of the axial melt lens at fast spreading oceanic ridges.
ISSN: 1525-2027

hal-00644798
https://hal.archives-ouvertes.fr/hal-00644798
DOI : 10.1029/2011GC003655

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
At oceanic spreading centers, interactions between magma and hydrothermal convecting systems trigger major physical, thermal, and chemical exchanges. The two-pyroxene hornfels recovered from the base of the sheeted dike sequence at Integrated Ocean Drilling Program (IODP) Site 1256 (equatorial Eastern Pacific) are interpreted as a conducting boundary layer between the underlying axial melt lens and the hydrothermally cooled sheeted dikes. They are cut by numerous small, felsic veins, which were recently interpreted as a product of hydrous partial melting of sheeted dikes. Here, we present trace element compositions of products (melts and residues) of hydrous partial melting experiments using basalts and hornfels from IODP Site 1256 as starting material. The experimental products generated between 910 °C and 970 °C match the natural lithologies from Site 1256 in terms of major and trace element compositions. The compositions of the anatectic melts correspond to the compositions of the felsic veins, while the residual minerals match the compositions of the two-pyroxene hornfels, evidencing that hydrous partial melting is an important magmatic process in the gabbro/dike transition of fast-spreading mid-oceanic ridges. Our results complement previous experimental studies on anatectic processes occurring at the roof of the magma chambers from fast-spreading mid-ocean ridges. Moreover, calculations of mixing and assimilation fractional crystallization using the experimental partial melts as contaminant/assimilant showed that anatectic melts can only be a minor contributor to the contamination process.
ISSN: 0024-4937

hal-01419949
https://hal.archives-ouvertes.fr/hal-01419949
DOI : 10.1016/j.lithos.2016.05.001