Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
Replenished axial melt lenses at fast-spreading mid-oceanic ridges may move upward and intrude into the overlying hydrothermally altered sheeted dikes, resulting in high-grade contact metamorphism with the potential to trigger anatexis in the roof rocks. Assumed products of this process are anatectic melts of felsic composition and granoblastic, two-pyroxene hornfels, representing the residue after partial melting. Integrated Ocean Drilling Program Expeditions 309, 312, and 335 at Site 1256 (eastern equatorial Pacific) sampled such a fossilized oceanic magma chamber. In this study, we simulated magma chamber roof rock anatectic processes by performing partial melting experiments using six different protoliths from the Site 1256 sheeted dike complex, spanning a lithological range from poorly to strongly altered basalts to partially or fully recrystallized granoblastic hornfels. Results show that extensively altered starting material lacking primary magmatic minerals cannot reproduce the chemistry of natural felsic rocks recovered in ridge environments, especially elements sensitive to hydrothermal alteration (e.g., K, Cl). Natural geochemical trends are reproduced through partial melting of moderately altered basalts from the lower sheeted dikes. Two-pyroxene hornfels, the assumed residue, were reproduced only at low melting degrees (<20 vol%). The overall amphibole absence in the experiments confirms the natural observation that amphibole is not produced during peak metamorphism. Comparing experimental products with the natural equivalents reveals that water activity (aH2O) was significantly reduced during anatectic processes, mainly based on lower melt aluminum oxide and lower plagioclase anorthite content at lower aH2O. High silica melt at the expected temperature (1000–1050 °C; peak thermal overprint of two-pyroxene hornfels) could only be reproduced in the experimental series performed at aH2O = 0.1.
ISSN: 0010-7999

hal-01174139
https://hal.archives-ouvertes.fr/hal-01174139
DOI : 10.1007/s00410-015-1136-5

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Although magmatism may occur during the earliest stages of continental rifting, its role in strain accommodation remains weakly constrained by largely 2-D studies. We analyze seismicity data from a 13 month, 39-station broadband seismic array to determine the role of magma intrusion on state-of-stress and strain localization, and their along-strike variations. Precise earthquake locations using cluster analyses and a new 3-D velocity model reveal lower crustal earthquakes beneath the central basins and along projections of steep border faults that degas CO2. Seismicity forms several disks interpreted as sills at 6-10 km below a monogenetic cone field. The sills overlie a lower crustal magma chamber that may feed eruptions at Oldoinyo Lengai volcano. After determining a new ML scaling relation, we determine a b-value of 0.87±0.03. Focal mechanisms for 65 earthquakes, and 13 from a catalogue prior to our array reveal an along-axis stress rotation of ∼60° in the magmatically active zone. New and prior mechanisms show predominantly normal slip along steep nodal planes, with extension directions ∼N90°E north and south of an active volcanic chain consistent with geodetic data, and ∼N150°E in the volcanic chain. The stress rotation facilitates strain transfer from border fault systems, the locus of early-stage deformation, to the zone of magma intrusion in the central rift. Our seismic, structural, and geochemistry results indicate that frequent lower crustal earthquakes are promoted by elevated pore pressures from volatile degassing along border faults, and hydraulic fracture around the margins of magma bodies. Results indicate that earthquakes are largely driven by stress state around inflating magma bodies.
ISSN: 1525-2027

hal-01667198
https://hal.archives-ouvertes.fr/hal-01667198
DOI : 10.1002/2017GC007027

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : Mid-ocean ridges magmatism is, by and large, considered to be mostly dry. Nevertheless, numerous works in the last decade have shown that a hydrous component is likely to be involved in ocean ridges magmas genesis and/or evolution. The petrology and geochemistry of peculiar coarse grained gabbros sampled in the upper part of the gabbroic sequence from the northern Oman ophiolite (Wadi Rajmi) provide information on the origin and fate of hydrous melts in fast-spreading oceanic settings. Uncommon crystallization sequences for oceanic settings (clinopyroxene crystallizing before plagioclase), extreme mineral compositions (plagioclase An% up to 99, and clinopyroxene Mg # up to 96), and the presence of magmatic amphibole, imply the presence of a high water activity during crystallization. Various petrological and geochemical constraints point to hydration, resulting from the recycling of hydrothermal fluids. This recycling event may have occurred at the top of the axial magma chamber where assimilation of anatectic hydrous melts is recurrent along mid-ocean ridges or close to segments ends where fresh magma intrudes previously hydrothermally altered crust. In ophiolitic settings, hydration and remelting of hydrothermally altered rocks producing hydrous melts may also occur during the obduction process. Although dry magmatism dominates oceanic magmatism, the dynamic behavior of fast-spreading ocean ridge magma chambers has the potential to produce the observed hydrous melts (either in ophiolites or at spreading centers), which are thus part of the general mid-ocean ridges lineage.
ISSN: 1525-2027

hal-00939400
https://hal.archives-ouvertes.fr/hal-00939400
DOI : 10.1002/ggge.20137

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Oman ophiolite, the horizon where the melt lens pinched during drifting away from the ocean ridge axis has been identified. Starting in the Root Zone of the Sheeted Dike Complex (RZSDC) located above this horizon, 18 Sections down to the upper gabbros unit have been mapped in great detail, in selected areas of the southern massifs of this ophiolite. They are complemented by 133 sites, located throughout the entire ophiolite, where the transition from the RZSDC to the uppermost foliated gabbros is well exposed. Altogether, half the sites and 11 cross sections display, within a few tens of meters beneath the RZSDC, a magmatic foliation which is parallel to the overlying sheeted dikes. In the other sites and cross sections, the gabbro foliation is either flat-lying or steep but not parallel to the sheeted dikes. Compared to the RZSDC isotropic ophitic gabbros where clinopyroxene is interstitial between plagioclase laths, in the topmost steeply foliated gabbros, clinopyroxene is idiomorphic, becoming rapidly granular and tabular down section by recrystallization and peripheral alteration to hornblende. Moving down from these uppermost gabbros and over one hundred meters, the steep foliation becomes stronger and the poorly recovered top gabbros grade into the recrystallized, granular gabbros of the gabbro unit. These repeated observations indicate to ascribe these gabbros to subsidence of a compacting mush from the floor of the melt lens into the underlying, main magma chamber. The topmost gabbros beneath RZSDC, which were expelled from the melt lens by drifting very soon after settling on the melt lens floor, display in plagioclase a spectacular zoning pointing to a fast cooling. Moving downwards, stronger foliation, increased compaction and recovery-recrystallization are explained by the time spent by the subsiding mush inside the magma chamber increasing by one order of magnitude (similar to 50 to 500 yr) over this vertical distance. This field-based study brings compelling field evidence supporting the former models of subsidence which were based on the assumption that the mush that settled onto the floor of the melt lens is sucked downwards during drifting of the crust away from the ridge axis.
ISSN: 0012-821X

hal-00420903
https://hal.archives-ouvertes.fr/hal-00420903
DOI : 10.1016/j.epsl.2009.04.012

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition between the small melt lens observed on top of fast spreading ridge magma chambers and the overlying sheeted dike complex marks the interface between magma and the hydrothermal convective system. It is therefore critical to our understanding of fast spreading ridge accretion processes. We present maps of two areas of the Oman ophiolite where this transition zone is observed as continuous outcrops. Our observations, which include the base of the sheeted dike being crosscut by gabbros, are consistent with episodic dike injections in a steady state model but also suggest that the root of these dikes is commonly erased by vertical movements of the top of the melt lens. Dike assimilation is a possible mechanism for incorporating hydrated phases, which result from hydrothermal alteration, to the melt lens during upward migrations of its upper boundary. Upward migrations are also responsible for a granoblastic overprint of the root of the dikes that is also observed in the stoped diabase xenoliths. This granoblastic overprint attests to reheating of previously hydrothermally altered lithologies which can even trigger hydrous partial melting due to the lowering of the solidus of mafic lithologies by the presence of a water activity. Clinopyroxenes present in these granoblastic lithologies are typically low in Ti and Al content, thus strongly contrasting with corresponding magmatic clinopyroxene. This may attest to the recrystallization of clinopyroxenes after amphiboles under the peculiar conditions present at the root zone of the sheeted dike complex. Downward migrations of the top of the melt lens result in the crystallization of the isotropic gabbros at its roof, which represent the partly fossilized melt lens. Melt lens fossilization eventually occurs when magma supply is stopped or at the melt lens margins where the thermal conditions become cooler. Melt lens migration, recrystallization of hydrothermally altered sheeted dikes during reheating stages, and assimilation processes observed in the Oman ophiolite are consistent with the observations made in IODP Hole 1256D. We propose a general dynamic model in which the melt lens at fast spreading ridges undergoes upward and downward movements as a result of either eruption/replenishment stages or variations in the hydrothermal/magmatic fluxes.
ISSN: 1525-2027

hal-00445249
https://hal.archives-ouvertes.fr/hal-00445249
DOI : 10.1029/2009GC002652

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Search String Advanced > Saved Searches >ARTICLE TOOLS Get PDF (3653K) Save to My Profile E-mail Link to this Article Export Citation for this Article Get Citation Alerts Request PermissionsMore Sharing ServicesShare|Share on citeulikeShare on facebookShare on deliciousShare on www.mendeley.comShare on twitter Abstract Article References Cited ByView Full Article (HTML) Enhanced Article (HTML) Get PDF (3653K)AbstractFor the first time, the crystallized remnant of an oceanic ridge magma chamber is documented in the Oman ophiolite. It exists in the centre of a 40 km long monoclinal ridge (Jebel Dihm, Wadi Tayin massif), exposing a full crustal section perpendicular to the spreading direction. New detailed mapping supported by U-Pb zircon geochronology suggests that the active, fast-spreading ridge that died just prior to detachment of the ophiolite is preserved and largely intact. Our observations provide insights into the crystallizing mush zone of a magma chamber, before it crosses the external walls and solidifies as deformed gabbros. Our data provide new constraints on the shape and internal dynamics of a magma chamber, including gabbro subsidence from the floor of a perched melt lens and the limited contribution of sills to crustal accretion. By locating precisely the palaeo-ridge axis, prior full spreading rate estimates can be increased to ~140 km Ma−1.
ISSN: 0954-4879

hal-01121586
https://hal.archives-ouvertes.fr/hal-01121586
DOI : 10.1111/ter.12130

Éditeur(s) : HAL CCSD IODP
Résumé : Integrated Ocean Drilling Program (IODP) Expedition 335 (14 April–4 June 2011) will be the fourth ocean cruise of the "Superfast" campaign to drill a deep hole into intact oceanic basement and will return to Ocean Drilling Program (ODP) Hole 1256D to deepen this scientific reference penetration a significant distance into cumulate gabbros. Cores and data recovered during the Superfast 4 expedition will provide hitherto unavailable observations that will test models of the accretion and evolution of the oceanic crust. Site 1256 was specifically located on oceanic crust that formed at a superfast spreading rate (>200 mm/y) to exploit the observed relationship between spreading rate and depth to axial low velocity zones, thought to be magma chambers, seismically imaged at active mid-ocean ridges. This was a deliberate strategy to reduce the drilling distance to gabbroic rocks because thick sequences of lavas and dikes have proved difficult to penetrate in past. ODP Leg 206 (2002) initiated operations at Site 1256, including the installation in Hole 1256D of a reentry cone with 16 inch casing inserted through the 250 m thick sedimentary cover and cemented into basement to facilitate deep drilling. The hole was then cored ~500 m into basement. IODP Expeditions 309 and 312 (2005) successfully completed the first sampling of an intact section of upper oceanic crust from lavas, through the sheeted dikes, and into the upper gabbros. Hole 1256D now penetrates >1500 meters below seafloor (mbsf) and >1250 m subbasement and currently resides in the dike–gabbro transition zone. The first gabbroic rocks were encountered at 1407 mbsf. Below this lies a ~100 m complex zone of fractionated gabbros intruded into contact metamorphosed dikes. Although previous cruises achieved the benchmark objective of reaching gabbro in intact ocean crust, critical scientific questions remain. These include the following: 1. Does the lower crust form by the recrystallization and subsidence of a high-level magma chamber (gabbro glacier), crustal accretion by intrusion of sills throughout the lower crust, or some other mechanism? 2. Is the plutonic crust cooled by conduction or hydrothermal circulation? 3. What is the geological nature of Layer 3 and the Layer 2/3 boundary at Site 1256? 4. What is the magnetic contribution of the lower crust to marine magnetic anomalies? Hole 1256D is poised at a depth where samples that should conclusively address these questions can be obtained, possibly with only a few hundred meters of drilling. Importantly, as of the end of Expedition 312, the hole was clear of debris and open to its full depth. Increased rates of penetration (1.2 m/h) and enhanced core recovery (>35%) in the gabbros indicate that this return to Hole 1256D could deepen the hole >300 m into plutonic rocks, past the transition from dikes to gabbro, and into a region of solely cumulate gabbroic rocks.
https://hal.archives-ouvertes.fr/hal-00564953

hal-00564953
https://hal.archives-ouvertes.fr/hal-00564953
DOI : 10.2204/iodp.sp.335.2010

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We propose a new thermomechanical numerical model of mid-ocean ridge accretion aimed at investigating asymmetric spreading rates, diverse configurations of lens and sill magma injections, crystallization and depth, and on- and off-axis patterns of hydrothermal cooling. The numerical algorithm iteratively resolves temperature and motion equations until it reaches a stationary solution. The motion equation was written in a vorticity-stream function formalism, with boundary and internal conditions applied to the stream function to impose the style of magma injection. Unlike in previous models, our model does not assume an a priori shape for the temperature field, which is initiated by an initial half-space cooling according to the left and right spreading rates. Complex patterns of hydrothermal cooling are simulated by enhanced thermal diffusivity. The model succeeds in describing the dynamic and thermal effects of spreading rates, the style of magma intrusion, and the hydrothermal cooling. Accurate descriptions of these are essential to study the cooling histories of crustal rocks and geophysical observables.
ISSN: 1525-2027

hal-00413118
https://hal.archives-ouvertes.fr/hal-00413118
DOI : 10.1029/2008GC002270

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mid-ocean ridge basalt (MORB) is the most abundant magma on Earth, and provides a geochemical window into the mantle. Deriving mantle composition and melting processes from the erupted lavas requires correction to be made for their evolution as they pass through and generate the oceanic crust. This is typically done by assuming that modification of melts in crustal magma chambers occurs exclusively by fractional crystallisation. However, extensive mineral major- and trace element data from a full section of fast-spread lower crustal rocks exposed in Hess Deep (equatorial Pacific Ocean) demonstrate that their evolution is instead controlled by reactive porous flow. These reactions lead to a strong enrichment in, and fractionation of, incompatible trace elements in the melt (as recorded by clinopyroxene compositions), leading to melt compositions far outside of the compositional realm of MORB both in terms of trace element abundances and ratios. The reactive signature increases in strength up section, peaking in varitextured gabbros interpreted to represent the fossilised axial melt lens, indicating that reactive porous flow occurred on the scale of the entire lower crust. The enrichment of the melt is coupled with a strong trace element depletion of plagioclase, olivine, and, to a lesser extent, clinopyroxene cores, suggesting that these phases represent the residues of the reactions from which trace elements have been removed. The dominant role of reactive porous flow, and the resulting deviations from fractional crystallisation predictions, suggest that the lower oceanic crust plays a much more complex and significant role in modifying the compositions of MORB than previously expected, with consequent implications for models of mantle processes.
ISSN: 0012-821X

hal-00814075
https://hal.archives-ouvertes.fr/hal-00814075
DOI : 10.1016/j.epsl.2012.11.012

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
A comprehensive model for the activity of the elementary accretion segment at fast-spreading ridges relies on integration of structural data from the Oman ophiolite and geophysical results from the East Pacific Rise (EPR) around 9°N, which are of comparable size and spreading rates. The axial melt lens at shallow crustal level provides a link between Deval segmentation at the seafloor and a lower melt sill at Moho level, imaged at the EPR as a crustal melt zone (CMZ) and mapped in Oman as the Moho transition zone (MTZ). Both are attached to a mantle upwelling at the EPR, and to a frozen diapir in Oman. The physical link between diapiric mantle uprising at the Moho and Devals segmentation at the seafloor is the melt being injected from the mantle into the lower MTZ, ponding there, and then being released by powerful injections into the upper melt lens. The magma chamber covers the diapir at a distance of 5 km from the ridge axis.
ISSN: 0954-4879

hal-01171958
https://hal.archives-ouvertes.fr/hal-01171958
DOI : 10.1111/ter.12137

Éditeur(s) : American Geophysical Union
Résumé : Magmatism associated with subducting plate edges or slab tears has been suggested in the southern Okinawa Trough. The cross back-arc volcanic trail, which consists of a cluster of about 70 seamounts, is located above a Ryukyu slab tear lying along the 123.3°E meridian. In November 2003, more than 3300 earthquakes recorded in this area by 15 ocean bottom seismometers and surrounding land stations during a period of 12 days were used to determine the three-dimensional Vp and Vs velocity structures and Vp/Vs ratios. A mantle inflow characterized by low Vp and Vs and high Vp/Vs passing through the slab tear is imaged. The fluid and/or melt component is rising obliquely from the slab tear in the directions of the cross back-arc volcanic trail, the northern slope of the southern Okinawa Trough and to north of Iriomote Island. The asthenospheric intake is also imaged by an inclined chip-like high Vp/Vs and low Vp and Vs body dipping northerly, which might be linked to the slab retreat. West of the slab tear, most of the earthquakes are located around low Vp and Vs and high Vp/Vs bodies, which suggests that the seismicity is related to magmatic and/or fluid activities. East of it, earthquakes are concentrated in an area characterized by high Vp and Vs velocities and low Vp/Vs, suggesting that the magma chamber is absent beneath the axial part of the trough and that normal faulting is the main factor controlling the seismicity.
Journal of Geophysical Research ( JGR ) - Solid earth (0148-0227) (American Geophysical Union), 2007-08 , Vol. 112 , N. B8 , P. NIL_13-NIL_32

Droits : 2007 AGU
http://archimer.ifremer.fr/doc/2007/publication-3032.pdf
DOI:10.1029/2006JB004703
http://archimer.ifremer.fr/doc/00000/3032/

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Microstructures and crystallographic preferred orientation (CPO) of anorthosite samples interlayered in the upper and lower gabbro sections in the Oman ophiolite were analyzed in this paper. In the anorthosites registering the dynamics of the melt lenses, foliation is flat lying and starts to develop a few meters below the root zone of the sheeted dike complex (RZSDC). Microstructures and CPO of these rocks were developed in response to four different mechanisms: (1) density-controlled settling of plagioclase on the lens floor, (2) deposition of anorthosites related to convection currents, (3) melt compaction, and (4) uncompacted melt accumulation. In these anorthosites, the poles to (010) of plagioclase are parallel to the flow plane of convection, whereas the [100] axes and poles to (001) express the convection flow direction and the axis of convection rolls, respectively. The effect of subsidence of melt lens floor is recorded immediately below the RZSDC and is characterized by the rapid (but progressive) development of dipping foliation and lineation, reflecting the increase of deformation downsection. The degree of foliation and CPO development in the anorthosites is directly related to the distance of the center of the melt lenses before the subsidence starts. Despite the uncertain origin of the anorthosites from the lower gabbro section, all the samples lost the magmatic microstructural characteristics and presently are reequilibrated aggregates. However, they still preserve plagioclase CPO, where some of these patterns present similarities with the anorthosites from the upper gabbro section, but no evidence of intracrystalline deformation under high temperatures.
ISSN: 0278-7407

hal-00617446
https://hal.archives-ouvertes.fr/hal-00617446
DOI : 10.1029/2010TC002697

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The ODP/IODP multileg campaign at ODP Site 1256 (Cocos plate, eastern equatorial Pacific) provides the first continuous in situ sampling of fast spreading ocean crust from the extrusive lavas, through the sheeted dikes and down into the uppermost gabbros. This paper focuses on a detailed petrographic and microanalytical investigation of the gabbro section drilled during IODP Expedition 312. The marked patchy and spotty features that can be observed in many Hole 1256D gabbros is mostly due to a close association of two different lithological domains in variable amounts: (1) subophitic domains and (2) a granular matrix. Major and trace element mineral compositions, geothermometry, and petrological modeling suggest that subophitic and granular domains follow one single magma evolution trend formed by in situ fractionation. The subophitic domains correspond to the relative primitive, high-temperature end-member, compositionally similar to the basalts and dikes from the extrusive unit upsection, while the granular domains fit with a magma evolution by crystal fractionation to lower temperatures, up to a degree of crystallization of similar to 80%. Our results support the following scenario for the fossilization of the axial melt lens at ODP Site 1256: relatively primitive MORB melts under near-liquidus conditions fill the melt lens and feed the upper, extrusive crust. Near the melt lens-sheeted dike boundary at lower temperatures, crystallization starts with first plagioclase before clinopyroxene in a mushy zone forming the subophitic domains. At decreasing temperatures, the subophitic domains continue to crystallize, finally forming a well-connected framework. Evolved, residual melt is finally trapped within the subophitic network, crystallizing at near-solidus conditions to the granular matrix. Another important textural feature in Hole 1256D gabbros is the presence of microgranular domains which are interpreted as relics of stoped/assimilated sheeted dikes (transformed to "granoblastic dikes" by contact metamorphism). All these different domains can be observed in close association, often at the thin section scale, demonstrating the extremely complex petrological record of combined crystallization/assimilation processes ongoing in the axial melt lens. Very similar gabbros with a marked spotty/patchy appearance, and bearing the same close association of lithological domains as observed at Site 1256, are known in the so-called "varitextured gabbro" unit from the Oman Ophiolite located at the same structural level, between cumulate gabbros and granoblastic dikes. The close petrological similarity of the gabbro/dike transition between both IODP Hole 1256D and the Oman ophiolite suggests that in situ fractionation and dike assimilation/contamination are major magmatic processes controlling the dynamics and fossilization of the axial melt lens at fast spreading oceanic ridges.
ISSN: 1525-2027

hal-00644798
https://hal.archives-ouvertes.fr/hal-00644798
DOI : 10.1029/2011GC003655

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
In ophiolites and in present-day oceanic crust formed at fast spreading ridges, oceanic plagiogranites are commonly observed at, or close to the base of the sheeted dike complex. They can be produced either by differentiation of mafic melts, or by hydrous partial melting of the hydrothermally altered sheeted dikes. In addition, the hydrothermally altered base of the sheeted dike complex, which is often infiltrated by plagiogranitic veins, is usually recrystallized into granoblastic dikes that are commonly interpreted as a result of prograde granulitic metamorphism. To test the anatectic origin of oceanic plagiogranites, we performed melting experiments on a natural hydrothermally altered dike, under conditions that match those prevailing at the base of the sheeted dike complex. All generated melts are water saturated, transitional between tholeiitic and calc-alkaline, and match the compositions of oceanic plagiogranites observed close to the base of the sheeted dike complex. Newly crystallized clinopyroxene and plagioclase have compositions that are characteristic of the same minerals in granoblastic dikes. Published silicic melt compositions obtained in classical MORB fractionation experiments also broadly match the compositions of oceanic plagiogranites; however, the compositions of the coexisting experimental minerals significantly deviate from those of the granoblastic dikes. Our results demonstrate that hydrous partial melting is a likely common process in the root zone of the sheeted dike complex, starting at temperatures exceeding 850A degrees C. The newly formed melt can either crystallize to form oceanic plagiogranites or may be recycled within the melt lens resulting in hybridized and contaminated MORB melts. It represents the main MORB crustal contamination process. The residue after the partial melting event is represented by the granoblastic dikes. Our results support a model with a dynamic melt lens that has the potential to trigger hydrous partial melting reactions in the previously hydrothermally altered sheeted dikes. A new thermometer using the Al content of clinopyroxene is also elaborated.
ISSN: 0010-7999

hal-00534058
https://hal.archives-ouvertes.fr/hal-00534058
DOI : 10.1007/s00410-010-0502-6

Éditeur(s) : HAL CCSD
Résumé : National audience
New experimental data on electrical and anelastic properties of oceanic rocks at high pressures and temperatures are compared with the field data of seismic and electrical anomalies observed at oceanic spreading centers. The laboratory results of electrical conductivity and internal friction on gabbro and peridotites permit to estimate a degree of partial melting and maximum temperature in axial magma chambers (12-15% of melting at 1155-1165°C) and at the upper boundary of a source zone at the depth of 40-90 km (less than 5% of melting in the absence of pyroxene crystals and up to 11-14% in the pyroxene reach rocks at 1360-1370°C) at mid-oceanic ridges.
ISSN: 0934-6554

hal-01322920
http://hal.univ-reunion.fr/hal-01322920

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
At oceanic spreading centers, interactions between magma and hydrothermal convecting systems trigger major physical, thermal, and chemical exchanges. The two-pyroxene hornfels recovered from the base of the sheeted dike sequence at Integrated Ocean Drilling Program (IODP) Site 1256 (equatorial Eastern Pacific) are interpreted as a conducting boundary layer between the underlying axial melt lens and the hydrothermally cooled sheeted dikes. They are cut by numerous small, felsic veins, which were recently interpreted as a product of hydrous partial melting of sheeted dikes. Here, we present trace element compositions of products (melts and residues) of hydrous partial melting experiments using basalts and hornfels from IODP Site 1256 as starting material. The experimental products generated between 910 °C and 970 °C match the natural lithologies from Site 1256 in terms of major and trace element compositions. The compositions of the anatectic melts correspond to the compositions of the felsic veins, while the residual minerals match the compositions of the two-pyroxene hornfels, evidencing that hydrous partial melting is an important magmatic process in the gabbro/dike transition of fast-spreading mid-oceanic ridges. Our results complement previous experimental studies on anatectic processes occurring at the roof of the magma chambers from fast-spreading mid-ocean ridges. Moreover, calculations of mixing and assimilation fractional crystallization using the experimental partial melts as contaminant/assimilant showed that anatectic melts can only be a minor contributor to the contamination process.
ISSN: 0024-4937

hal-01419949
https://hal.archives-ouvertes.fr/hal-01419949
DOI : 10.1016/j.lithos.2016.05.001