Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Oman ophiolite is regarded as derived from a fast spreading oceanic ridge. As in its present-day marine analogs, expectedly, the gabbro unit crystallized in a large magma chamber underneath a small melt lens. In ophiolites, this melt lens is reduced to a horizon mapped in the field, where the floor and the roof of the melt lens joined. The magmatic activity of the former melt lens has been studied in gabbros located below the melt lens horizon. Beneath a stable melt lens, gabbros subside and drift through the steep walls of the magma chamber as steeply foliated gabbros. In contrast, in unstable melt lenses more specifically considered here, flat-lying gabbros are exposed beneath the lens. These gabbros were settling on the floor while the melt lens was retreating. Their strong magmatic foliations and lineations point to a dynamic deposition on the floor, and lineation trends record the structure of convection rolls within the lens. Time constraints suggest a similar to 100 year periodicity of melt recharge by short and powerful melt pulses followed by a shorter time of convection activity after recharge and a longer period of static magma settling, as recently proposed for the East Pacific Rise. At each new melt pulse, the lens nearly doubles its volume by surface expansion, within a short time lapse, before slowly and progressively retreating to feed crustal accretion. Large horizontal surface inflation of the lens better explains the seawater hydration of the accreting crust than melt lens vertical motion through the lid.
ISSN: 0148-0227

hal-00617452
https://hal.archives-ouvertes.fr/hal-00617452
DOI : 10.1029/2010JB007934

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
Replenished axial melt lenses at fast-spreading mid-oceanic ridges may move upward and intrude into the overlying hydrothermally altered sheeted dikes, resulting in high-grade contact metamorphism with the potential to trigger anatexis in the roof rocks. Assumed products of this process are anatectic melts of felsic composition and granoblastic, two-pyroxene hornfels, representing the residue after partial melting. Integrated Ocean Drilling Program Expeditions 309, 312, and 335 at Site 1256 (eastern equatorial Pacific) sampled such a fossilized oceanic magma chamber. In this study, we simulated magma chamber roof rock anatectic processes by performing partial melting experiments using six different protoliths from the Site 1256 sheeted dike complex, spanning a lithological range from poorly to strongly altered basalts to partially or fully recrystallized granoblastic hornfels. Results show that extensively altered starting material lacking primary magmatic minerals cannot reproduce the chemistry of natural felsic rocks recovered in ridge environments, especially elements sensitive to hydrothermal alteration (e.g., K, Cl). Natural geochemical trends are reproduced through partial melting of moderately altered basalts from the lower sheeted dikes. Two-pyroxene hornfels, the assumed residue, were reproduced only at low melting degrees (<20 vol%). The overall amphibole absence in the experiments confirms the natural observation that amphibole is not produced during peak metamorphism. Comparing experimental products with the natural equivalents reveals that water activity (aH2O) was significantly reduced during anatectic processes, mainly based on lower melt aluminum oxide and lower plagioclase anorthite content at lower aH2O. High silica melt at the expected temperature (1000–1050 °C; peak thermal overprint of two-pyroxene hornfels) could only be reproduced in the experimental series performed at aH2O = 0.1.
ISSN: 0010-7999

hal-01174139
https://hal.archives-ouvertes.fr/hal-01174139
DOI : 10.1007/s00410-015-1136-5

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Middle Atlas is a region where xenolith-bearing volcanism roughly coincides with the maximum of lithospheric thinning beneath continental Morocco. It is therefore a key area to study the mechanisms of lithospheric thinning and constrain the component of mantle buoyancy that is required to explain the Moroccan topography. Samples from the two main xenolith localities, the Bou Ibalghatene and Tafraoute maars, have been investigated for their mineralogy, microstructures, crystallographic preferred orientation, and whole-rock and mineral compositions. While Bou Ibalghatene belongs to the main Middle Atlas volcanic field, in the ‘tabular’ Middle Atlas, Tafraoute is situated about 45 km away, on the North Middle Atlas Fault that separates the ‘folded’ Middle Atlas, to the South-East, from the ‘tabular’ Middle Atlas, to the North-West. Both xenolith suites record infiltration of sub-lithospheric melts that are akin to the Middle Atlas volcanism but were differentiated to variable degrees as a result of interactions with lithospheric mantle. However, while the Bou Ibalghatene mantle was densely traversed by high melt fractions, mostly focused in melt conduits, the Tafraoute suite records heterogeneous infiltration of smaller melt fractions that migrated diffusively, by intergranular porous flow. As a consequence the lithospheric mantle beneath Bou Ibalghaten was strongly modified by melt–rock interactions in the Cenozoic whereas the Tafraoute mantle preserves the record of extensional lithospheric thinning, most likely related to Mesozoic rifting. The two xenolith suites illustrate distinct mechanisms of lithospheric thinning: extensional thinning in Tafraoute, where hydrous incongruent melting triggered by decompression probably played a key role in favouring strain localisation, vs. thermal erosion in Bou Ibalghatene, favoured and guided by a dense network of melt conduits. Our results lend support to the suggestion that lithospheric thinning beneath the Atlas mountains results from the combination of different mechanisms and occurred in a piecewise fashion at a short wavelength scale.
ISSN: 0040-1951

hal-01171756
https://hal.archives-ouvertes.fr/hal-01171756
DOI : 10.1016/j.tecto.2014.11.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : The Erro-Tobbio peridotites (Voltri Massif, Ligurian Alps) represent subcontinental lithospheric mantle tectonically exhumed during Permo-Mesozoic extension of the Europe-Adria lithosphere. Previous studies have shown that exhumation started during Permian times, and occurred along kilometer-scale lithospheric shear zones which enhanced progressive deformation and recrystallization from spinel- to plagioclase-facies conditions. Ongoing field and petrologic investigations have revealed that the peridotites experienced, during uplift, a composite history of diffuse melt migration and multiple episodes of ultramafic-mafic intrusions. In this paper we present the results of field, structural and petrologic-geochemical investigations into a sector of the Erro-Tobbio peridotite unit that preserves well this multiple intrusion history. Melt impregnation in the peridotites is evidenced by significant plagioclase enrichment and crystallization of unstrained orthopyroxene replacing kinked mantle olivine and clinopyroxene; impregnating melts were thus opx-saturated. Melt-rock interaction caused chemical changes in mantle minerals (e.g. Al decrease and REE increase in cpx; Ti and Cr# enrichment in spinel). Nevertheless, clinopyroxenes still exhibit LREE depletion (Ce;N;/Sm;N; = 0.006-0.011), indicating a depleted signature for the percolating melts. Melt impregnation was thus related to diffuse porous flow migration of depleted MORB-type melt fractions that modified their compositions towards opx saturation by mantle-melt interaction during ascent. The impregnated peridotites are intruded by a hectometer-scale stratified cumulate body, mostly consisting of troctolites and plagioclase wehrlites, showing gradational, interfingered contacts with the host mantle rocks. Subsequent intrusion events are revealed by the occurrence of olivine gabbros as decameter-wide lenses, variably thick (centimeter- to meter-scale) dykes and thin dykelets, which crosscut both the peridotite foliation and the magmatic layering in the cumulates. Overall, major and trace element compositions of minerals in the intrusives indicate that they represent variably differentiated cumulus products crystallized from rather primitive N-MORB-type aggregated melts. Slightly more evolved compositions are shown by olivine gabbros, relative to the troctolites and plagioclase wehrlites of the cumulate body. Mineral chemistry features (e.g. the Fo-An correlation and high Na, Ti, Mg# in cpx) indicate that the studied intrusive rocks crystallized at moderate pressure conditions (3-5 kbar, i.e. 9-15 km depth). Our study thus points to a progressive transition from porous flow melt migration to emplacement of magmas in fractures, presumably related to progressive change of lithospheric mantle rheology during extension-related uplift and cooling.
ISSN: 0024-4937

hal-00407669
https://hal.archives-ouvertes.fr/hal-00407669
DOI : 10.1016/j.lithos.2006.06.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We studied the deformation in a partially molten mantle through detailed petrostructural analysis of plagioclase lherzolites from the northwestern part of the central Lanzo massif. These peridotites display a pervasive anastomosed network of millimetre to centimetre-scale plagioclase-rich bands, which grades locally into a planar layering marked by an intercalation of plagioclase-rich and olivine-rich layers up to tens of centimetres wide. Both the anastomosed and the planar layering are subparallel to the deformation fabric, characterized by a foliation defined by the shape-preferred orientation of olivine and by crystal preferred orientation (CPO) of olivine, orthopyroxene, and clinopyroxene. This parallelism, the coexistence of microstructural evidence for melt-rock reactions and for deformation by dislocation creep, and the predominance of axial-[010] olivine CPO patterns, characterized by [010] axes clustered normal to the layering, indicate that deformation and the reactive melt percolation that formed the layering were coeval. Strong heterogeneity in mineral composition in the planar layering domains, with Fe-enrichment in olivine and spinel and highly variable Ti content in spinel in cm-scale plagioclase-rich bands, implies that the latter interacted with higher melt volumes. High Ti contents in pyroxenes and spinel in the anastomosed layering domains point to changes in melt composition, hinting to less effective melt transport. We propose therefore that the planar layering records melt segregation in layers parallel to the shear plane, whereas the anastomosed layering results from melt alignment along grain boundaries subparallel to the shear plane, without segregation. Finite strain in the different layers cannot be quantified, but comparison of the present observations with data from experiments and from other mantle outcrops displaying shear-controlled melt organization suggests that the transition from the anastomosed to the planar layering might record an increase in finite strain, that is, strain localization associated with variations in the instantaneous melt fraction.
ISSN: 0040-1951

hal-01053509
https://hal.archives-ouvertes.fr/hal-01053509
DOI : 10.1016/j.tecto.2014.01.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Melt generation in the continental crust is thought to significantly influence seismic bulk velocities and anisotropy, although existing laboratory data provide limited constraints on such seismic attributes. In this study we measured ultrasonic compressional wave speeds (Vp) and anisotropy during sample compaction, mica-breakdown and melt-generation in synthetic, foliated quartz–muscovite aggregates. Measurements were performed at peak conditions of 300 MPa hydrostatic confining pressure and 750 °C, over a six hour time period, for three separate samples where wave propagation directions were aligned at 0°, 45° and 90° with respect to the foliation plane. The experiments are initially marked by sample compaction and rapid reduction in porosity (from 25% to <2 vol%), with a corresponding increase in Vp. During initial stages of the experiment Vp ranges from 4.65 to 5.45 km/s, depending on the direction of the P wave propagation, resulting in up to ∼16% anisotropy, which originates mainly from the preferred orientation of muscovite and possible incipient melt lenses oriented parallel to foliation. As the experiment progresses the bulk Vp decreases gradually and Vp anisotropy drops from ∼16% to ∼2% after five hours into the experiment. The drop in anisotropy is caused by muscovite-breakdown and increasing amount of partial melting of the aggregate. The bulk velocities are considerably lower than predicted for a mixture of muscovite and β-quartz (stable at 300 MPa and 750 °C). Thermodynamic modeling indicates that mica breakdown and production of melt with ∼2 wt% dissolved water in the aggregate can explain the low Vp, even though β-quartz is stable; the modeled Vp is ∼4.75 km/s at 300 MPa and 750 °C. These ultrasonic attributes signify movement of the melt to fill vacant pores and coating grain boundaries, effectively connecting melt films and reducing seismic anisotropy. The results may apply to regions where crustal melting is on-going, in particular regions of elevated temperature that are only weakly deforming, with coupled anomalously low bulk velocities and seismic anisotropy.
ISSN: 0012-821X

hal-01243569
https://hal.archives-ouvertes.fr/hal-01243569
DOI : 10.1016/j.epsl.2015.05.039

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
At Cima di Gagnone, garnet peridotite and chlorite harzburgite lenses within pelitic schists and gneisses correspond to eclogite-facies breakdown products of hydrated peridotites and are suitable for studying dehydration of serpentinized mantle. Thermobarometry and pseudosection modelling yield peak temperatures of 750-850°C and pressures <3 GPa. The minimum temperature recorded by the garnet peridotite corresponds to the maximum conditions experienced by the chlorite harzburgite, suggesting that these rocks recrystallized cofacially at ∼800°C. Alternatively, they might have decoupled during subduction, as achieved in tectonically active plate interface boundaries. The major and rare earth element (REE) variability of the peridotites was mostly acquired during pre-subduction mantle evolution as a result of partial melting and reactive melt flow. The ultramafic suite is also characterized by fluid-mobile element enrichments (B, Pb, As, Sb, Cs, Li, U, Be), which confirm derivation from variably serpentinized protoliths. Similarity in the U, Pb, B, Li and Sr contents of the Gagnone peridotites to present-day oceanic serpentinites suggests that these elements were partly taken up during initial serpentinization by seawater-derived fluids. Positive Be, As and Sb anomalies suggest involvement of fluids equilibrated with crustal (metasedimentary) reservoirs during subsequent subduction metamorphism and peridotite entrainment in (meta)sediments. Fluid-mobile element enrichment characterizes all peak eclogitic minerals, implying that multiple hydration events and element influx pre-dated the eclogite-facies dehydration. Peak anhydrous minerals retain B, Li, As and Sb concentrations exceeding primitive mantle values and may introduce geochemical anomalies into the Earth's mantle. The relatively low contents of large ion lithophile elements and light REE in the Gagnone peridotites with respect to much higher enrichments shown by metasomatized garnet peridotite pods hosted in migmatites (Ulten Zone, Eastern Alps) suggest that the crustal rocks at Gagnone did not experience partial melting. The Gagnone garnet peridotite, despite showing evidence for chlorite dehydration, retains significant amounts of fluid-mobile elements documenting that no partial melting occurred upon chlorite breakdown. We propose that the Gagnone ultramafic rocks represent a prime example of multi-stage peridotite hydration and subsequent dehydration in a plate interface setting.
ISSN: 0022-3530

hal-01054319
https://hal.archives-ouvertes.fr/hal-01054319
DOI : 10.1093/petrology/egt068

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The mantle above a subducting slab is the site of complex interactions between deformation, partial melting, fluid migration and magma transport. To constrain these interactions and their effects on olivine deformation, we analyze microstructures, crystal preferred orientations, and water contents of peridotite xenoliths entrained by andesites of the Avacha volcano, southern Kamchatka arc. These xenoliths are refractory spinel harzburgites that have coarse-grained microstructures with widely spaced subgrain boundaries and sinuous grain boundaries in olivine, consistent with deformation by dislocation creep under low deviatoric stress (< 13 MPa) and with a significant contribution from diffusional processes. Analysis of crystal preferred orientations (CPO) indicates dominant activation of high-temperature, low-stress {0kl}[100] slip systems in olivine and of(100)[001] in orthopyroxene. In most samples, coarse opx crystals, elongated parallel to the lineation, enclose small olivine grains in crystallographic continuity with neighbouring crystals, indicating crystallization of orthopyroxene at the expense of olivine as a result of reactive percolation of Si-rich fluids coeval with the high-temperature deformation. Secondary crystallization of interstitial orthopyroxene led locally to development of opx-rich lenses parallel to the foliation, characterized by a decrease in olivine grain size and dispersion of the olivine CPO without changing the dominant slip systems. Half of the samples also show acicular orthopyroxene aggregates with which is associated a fine-grained matrix composed of rounded strain-free olivine, orthopyroxene, spinel, and rare amphibole crystals. This matrix occurs pervasively along grain boundaries or forms millimeter-scale irregular lenses and anastomosing veinlets that crosscut the coarse crystals and their ductile deformation structures. Both acicular orthopyroxene and the fine-grained matrix are interpreted as resulting from reactive transport of H2O-rich fluids under static conditions, probably in the lithospheric mantle. Infrared analyses show that olivine contains 1-8 center dot 6 ppm by weight of water. These low water contents are similar to those observed in spinel peridotites from other subduction zones and probably record both the low solubility of water in olivine at low pressure and dehydration during exhumation of the xenoliths. Water contents in orthopyroxene are highly variable (25-506 ppm H2O), probably recording spatially heterogeneous interaction with fluids or melts and compositional disequilibrium in the studied samples. Change in the dominant percolation mechanism from porous flow to fracturing suggests cooling, consistent with the low temperatures estimated from pyroxene thermometry (< 800-900 degrees C). The Avacha xenoliths therefore record pervasive deformation of a region of the mantle under asthenospheric conditions, followed by its accretion to the base of the lithosphere, probably as a result of cooling of the mantle wedge. Percolation of Si-rich fluids or hydrous melts is recorded at all stages; this probably enhanced diffusion and lowered deviatoric stresses during ductile deformation, but did not change the dominant slip direction in olivine from [100] to [001].
ISSN: 0022-3530

hal-00456053
https://hal.archives-ouvertes.fr/hal-00456053
DOI : 10.1093/petrology/egp085

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Microstructures and crystallographic preferred orientation (CPO) of anorthosite samples interlayered in the upper and lower gabbro sections in the Oman ophiolite were analyzed in this paper. In the anorthosites registering the dynamics of the melt lenses, foliation is flat lying and starts to develop a few meters below the root zone of the sheeted dike complex (RZSDC). Microstructures and CPO of these rocks were developed in response to four different mechanisms: (1) density-controlled settling of plagioclase on the lens floor, (2) deposition of anorthosites related to convection currents, (3) melt compaction, and (4) uncompacted melt accumulation. In these anorthosites, the poles to (010) of plagioclase are parallel to the flow plane of convection, whereas the [100] axes and poles to (001) express the convection flow direction and the axis of convection rolls, respectively. The effect of subsidence of melt lens floor is recorded immediately below the RZSDC and is characterized by the rapid (but progressive) development of dipping foliation and lineation, reflecting the increase of deformation downsection. The degree of foliation and CPO development in the anorthosites is directly related to the distance of the center of the melt lenses before the subsidence starts. Despite the uncertain origin of the anorthosites from the lower gabbro section, all the samples lost the magmatic microstructural characteristics and presently are reequilibrated aggregates. However, they still preserve plagioclase CPO, where some of these patterns present similarities with the anorthosites from the upper gabbro section, but no evidence of intracrystalline deformation under high temperatures.
ISSN: 0278-7407

hal-00617446
https://hal.archives-ouvertes.fr/hal-00617446
DOI : 10.1029/2010TC002697

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Oman ophiolite, a fossil fast-spreading oceanic ridge had a melt lens perched on top of the magma chamber wherein the gabbro unit was crystallizing. In ophiolites, this melt lens is reduced to a horizon that has been identified in the field. The gabbros that subsided from the lens horizon and drifted out of the magma chamber, while developing a steep magmatic foliation, provide insights into the active melt lens processes. A gabbro, sampled right below the horizon where the lens closed, has virtually not subsided and it offers a direct glance at the floor of the lens. Below, the deeper the gabbros are sampled, the more they have subsided before drifting out of the magma chamber, and the closer they derive from the center of the lens floor. Cross sections in these gabbros record successive events occurring within the lens. In particular, anorthosite layers and lenses that are interlayered within the foliated gabbros record the intrusion of a new melt where plagioclase is the first mineral to crystallize on liquidus. Detailed mapping of anorthosite swarms suggest that melt intrusions are massive, lasting less than 4 yr and that their frequency is similar to 100 yr. Their large volume controls the stability of melt lenses. A new melt surge induces rapid and large inflation of the lens. Melt lens deflation follows, that is due to the ongoing process of crustal accretion both in the gabbro unit by continuous subsidence of a thick gabbroic mush from the lens floor, and in the lid above the lens roof by sheeted dike intrusions feeding basalt extrusions at the higher frequency of similar to 10 yr.
ISSN: 0012-821X

hal-00617444
https://hal.archives-ouvertes.fr/hal-00617444
DOI : 10.1016/j.epsl.2011.01.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Oman ophiolite includes both a fossil fast spreading axis, defined by five mantle diapirs, and an off-axis mantle diapir emplaced 30 km from the axis, providing a natural laboratory for the study of off-axis magmatic processes. We compare field and petrological observations coupled with geochemical and isotopic analyses of samples from the off-axis diapir with those of the nearest on-axis diapir, with a particular focus on the Moho Transition Zone (MTZ). Both diapirs are defined by the presence of steeply plunging lineations, but in the on-axis case, these lineations rotate gradually into parallelism with the horizontal magmatic lineations of the overlying crust, while in the off-axis case, a shear zone separates the steeply plunging lineations from the horizontal lineations of the surrounding mantle. In the on-axis diapir, the MTZ is 50 to 500 m thick and composed of dunite with layered gabbro lenses whereas in the off-axis diapir, the MTZ is thicker and composed of dunite with massive (∼20% of MTZ) clinopyroxenite lenses and a notable absence of plagioclase. Moreover, the off-axis diapir is associated with amphibole-bearing intrusions, consisting of Mg-rich gabbroic sills in the mantle peripheral to the diapir, and microgabbroic lenses of broadly basaltic composition in the overlying crust. The ε Nd values of the pyroxenites in the MTZ of the off-axis diapir fully overlap with those of the intrusions in the surrounding mantle and crust, suggesting that they are genetically related. Calculated rare earth element (REE) abundances of liquids in equilibrium with clinopyroxene imply that the magmas that traversed the MTZ of the off-axis diapir were more depleted in highly incompatible elements than their counterparts in the MTZ of the on-axis diapir. On the other hand, Nd isotopic compositions of the off-axis samples (εNd=6.2–7.9εNd=6.2–7.9 in 18 of 19 samples) indicate derivation of their parental magmas from a less depleted source than that which produced the magma associated with the on-axis gabbro (εNd=7.8–9.2εNd=7.8–9.2, 10 analyses).To explain these observations, we suggest that the earliest magmas in the uprising off-axis diapir formed from the partial melting of pyroxenite veins with less radiogenic Nd isotopic compositions than those of the ambient peridotite. As the diapir traversed the cool, hydrated lithosphere these early melts interacted with depleted harzburgites, lowering the incompatible element contents of the melt products while having little effect on their Nd isotopic compositions. The great abundance of clinopyroxene in the off-axis MTZ might be explained by the high pyroxene component in the original melt but perhaps also by the presence of water in the lithosphere, which would favor the crystallization of clinopyroxene while inhibiting that of plagioclase. The intrusions in the overlying crust could represent, to first order, the secondary melts produced by the melt–harzburgite reaction, while the sills in the surrounding mantle may be cumulates from such secondary melts.These results shed light on processes occurring during interaction between rising off-axis material and depleted, hydrated lithospheric mantle. Furthermore, if our interpretation is correct, the low εNd values of the off-axis samples contribute to the growing body of evidence for the presence of pyroxenite veins in the MORB mantle source.
ISSN: 0012-821X

hal-01306575
https://hal.archives-ouvertes.fr/hal-01306575
DOI : 10.1016/j.epsl.2015.12.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Interactions between deformation and melt percolation yield important consequences for the evolution of the mantle lithosphere, controlling its composition and mechanical behavior. In the Lherz massif (Pyrenees, France), the analysis of structural relationships between harzburgites, lherzolites and pyroxenites and of the crystal-preferred orientations (CPO) of olivine and pyroxenes highlights a strong feedback between percolation of basaltic melts and deformation under near-solidus conditions at the lithosphere–asthenosphere boundary. Elongated harzburgite bodies up to tens of meters wide, which are the remnants of an old lithospheric mantle, preserve a constant foliation. This foliation is locally outlined by cm-scale flattened websteritic lenses. At the contact with the enclosing lherzolites, the harzburgite foliation is crosscut by the lherzolites foliation and by cm-wide websterite bands parallel to the contact. Strain intensity in the lherzolites increases with distance to the harzburgites. Based on these observations, we propose that reactive percolation was synchronous to the deformation and propose that variations in instantaneous melt fraction, due to pyroxenes and spinel crystallization during reactive melt transport, guided strain localization. Accordingly, the observed decrease in olivine CPO intensity and change in CPO patterns from harzburgites to distal lherzolites are interpreted as recording changes in the relative contribution of dislocation glide and diffusion processes, which is ruled by a balance between the instantaneous melt fraction and the local strain rate. We also propose that the pervasive websteritic layering in the refertilized lherzolites may result from deformation-assisted melt segregation in a system with decreasing permeability due to refertilization reactions. Finally, we discuss the possible timing and geodynamical context of the refertilization episode.
ISSN: 0012-821X

hal-00411724
https://hal.archives-ouvertes.fr/hal-00411724
DOI : 10.1016/j.epsl.2008.07.053

Éditeur(s) : HAL CCSD Elsevier
Résumé : Hot collisional orogens are characterized by abundant syn-kinematic granitic magmatism that profoundly affects their tectono-thermal evolutions. Voluminous granitic magmas, emplaced between 360 and 270 Ma, played a visibly important role in the evolution of the Variscan Orogen. In the Limousin region (western Massif Central, France), syntectonic granite plutons are spatially associated with major strike-slip shear zones that merge to the northwest with the South Armorican Shear Zone. This region allowed us to assess the role of magmatism in a hot transpressional orogen. Microstructural data and U/Pb zircon and monazite ages from a mylonitic leucogranite indicate synkinematic emplacement in a dextral transpressional shear zone at 313 +/- 4 Ma. Leucogranites are coeval with cordierite-bearing migmatitic gneisses and vertical lenses of leucosome in strike-slip shear zones. We interpret U/Pb monazite ages of 315 +/- 4 Ma for the gneisses and 316 +/- 2 Ma for the leucosomes as the minimum age of high-grade metamorphism and migmatization respectively. These data suggest a spatial and temporal relationship between transpression, crustal melting, rapid exhumation and magma ascent, and cooling of high-grade metamorphic rocks.;Some granites emplaced in the strike-slip shear zone are bounded at their roof by low dip normal faults that strike N-S, perpendicular to the E-W trend of the belt. The abundant crustal magmatism provided a low-viscosity zone that enhanced Variscan orogenic collapse during continued transpression, inducing the development of normal faults in the transpression zone and thrust faults at the front of the collapsed orogen.
ISSN: 0040-1951

hal-00445260
https://hal.archives-ouvertes.fr/hal-00445260
DOI : 10.1016/j.tecto.2009.03.022

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Several recent studies have documented that reactions between melt and crystal mush in primitive gabbroic rocks (via reactive porous flow) have an important control in the formation of the lower oceanic crust and the evolution of MORBs. In this context, olivine-rich rocks can form either by fractional crystallization of primitive melts or by open system reactive percolation of pre-existing (possibly mantle-derived) olivine matrix. To address this question, we performed in-situ trace element analyses (by LA-ICP-MS) of olivine from the Erro-Tobbio ophiolite Unit (Ligurian Alps), where mantle peridotites show gradational contacts with an hectometer-scale body of troctolites and plagioclase wehrlites, and both are cut by later decameter-wide lenses and dykes of olivine gabbros. Previous studies inferred that troctolites and olivine gabbros represent variably differentiated crystallization products from primitive MORB-type melts. Olivines in the three rock types (mantle peridotites, troctolites, olivine gabbros) exhibit distinct geochemical signature and well-defined elemental correlations. As expected, compatible elements (e.g. Ni) show the highest concentrations in peridotites (2580–2730 ppm), intermediate in troctolites (2050–2230 ppm) and lowest in gabbros (1355–1420 ppm), whereas moderate incompatible elements (e.g. Mn, Zn) show the opposite behaviour. By contrast, highly incompatible elements like Zr, Hf, Ti, HREE are variably enriched in olivines of troctolites, and the enrichment in absolute concentrations is coupled to development of significant HFSE/REE fractionation (ZrN/NdN up to 80). AFC modelling shows that such large ZrN/NdN ratios in olivines are consistent with a process of olivine assimilation and plagioclase crystallization at decreasing melt mass, in agreement with textural observations. In-situ trace element geochemistry of olivine, combined with microstructural investigations, thus appears a powerful tool to investigate reactive percolation and the origin of olivine-rich rocks in the lower oceanic crust.
ISSN: 0016-7037

hal-01419938
https://hal.archives-ouvertes.fr/hal-01419938
DOI : 10.1016/j.gca.2016.06.029

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : We designed a thermo-mechanical numerical model for fast-spreading mid-ocean ridge with variable viscosity, hydrothermal cooling, latent heat release, sheeted dyke layer, and variable melt intrusion possibilities. The model allows for modulating several accretion possibilities such as the "gabbro glacier" (G), the "sheeted sills" (S) or the "mixed shallow and MTZ lenses" (M). These three crustal accretion modes have been explored assuming viscosity contrasts of 2 to 3 orders of magnitude between strong and weak phases and various hydrothermal cooling conditions depending on the cracking temperatures value. Mass conservation (stream-function), momentum (vorticity) and temperature equations are solved in 2-D cartesian geometry using 2-D, alternate direction, implicit and semi-implicit finite-difference scheme. In a first step, an Eulerian approach is used solving iteratively the motion and temperature equations until reaching steady states. With this procedure, the temperature patterns and motions that are obtained for the various crustal intrusion modes and hydrothermal cooling hypotheses display significant differences near the mid-ocean ridge axis. In a second step, a Lagrangian approach is used, recording the thermal histories and cooling rates of tracers travelling from the ridge axis to their final emplacements in the crust far from the mid-ocean ridge axis. The results show that the tracer's thermal histories are depending on the temperature patterns and the crustal accretion modes near the mid-ocean ridge axis. The instantaneous cooling rates obtained from these thermal histories betray these discrepancies and might therefore be used to characterize the crustal accretion mode at the ridge axis. These deciphering effects are even more pronounced if we consider the average cooling rates occurring over a prescribed temperature range. Two situations were tested at 1275-1125 °C and 1050-850 °C. The first temperature range covers mainly the crystallization range that is characteristic of the high temperature areas in the model (i.e. the near-mid-oceanic-ridge axis). The second temperature range corresponds to areas in the model where the motion is mainly laminar and the vertical temperature profiles are closer to conductive. Thus, this situation results in less discriminating efficiency among the crustal accretion modes since the thermal and dynamic properties that are described are common to all the crustal accretion modes far from the ridge axis. The results show that numerical modeling of thermo-mechanical properties of the lower crusts may bring useful information to characterize the ridge accretion structure, hydrothermal cooling and thermal state at the fast-spreading ridges and may open discussions with petrological cooling rate results.
ISSN: 1991-959X

hal-00907012
https://hal.archives-ouvertes.fr/hal-00907012
DOI : 10.5194/gmd-6-1659-2013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonic mixing of slab- and mantle-derived materials at the interface between converging plates highly enhances fluid-mediated mass transfer from the slab to the overlying mantle. Subduction mélanges can provide information about the interaction among different slices accreted at plate interface domains, with implications on the tectonic and geochemical evolution of the plate-interface itself. At Cima di Gagnone, pelitic schists and gneiss enclose chlorite harzburgite and garnet peridotite lenses, like in subduction mélanges located in-between downgoing slabs and overlying mantle. These peridotites host MORB-type eclogite and metarodingite, and derive from dehydration of serpentinized mantle protoliths. Their enrichment in fluid-mobile B, As, Sb, U, Th is the result of an early-stage oceanic serpentinization, followed by interaction with host metasediments during subduction burial. Here we define the element exchange process in the Gagnone mélange by means of the B, Sr and Pb isotope analysis of its main lithologies (ultramafic, mafic rocks and paragneiss). The 87Sr/86Sr and 206Pb/204Pb ratios of ultramafic rocks (0.7090–0.7124 and 18.292–18.837, respectively) show enrichments in radiogenic Sr and Pb after exchange with the host paraschist (up to 0.7287 87Sr/86Sr; 18.751 206Pb/204Pb). The δ11B values of peridotites (down to −10‰) point to a combined effect of (1) 11B release to deserpentinization fluids (serpentinized protoliths likely had positive δ11B and lower radiogenic Sr, Pb), and of (2) exchange with fluids from the surrounding metasediments. The whole Gagnone rock-suite is finally overprinted by retrograde fluids that essentially bring to an increase in radiogenic Pb (about 19.0 206Pb/204Pb) and to values of 0.710 87Sr/86Sr and of −10‰ δ11B. The recognition of different stages of interaction between mantle rocks and sedimentary/crustal reservoirs allows us to define the geochemical effects related to the early coupling of such rocks along the plate-interface. Our study shows that ultramafic rocks involved in subduction-zone metamorphism and serpentinization uptake radiogenic Pb and Sr released by associated sedimentary reservoirs. The exchange process envisioned here is not only representative of subduction mélanges: it can also be a proxy of mass transfer between slab and serpentinized supra-subduction mantle, as occurs in forearcs. Dehydration of the Gagnone-type serpentinized mantle releases crust-derived components to arcs, without direct involvement of metasediment dehydration and/or melting in subarc environments. The retention of appreciable amounts of fluid-mobile elements, radiogenic Pb and Sr in dehydrated Gagnone peridotites has implications on element recycling in the deep Earth’s mantle.
ISSN: 0016-7037

hal-01174137
https://hal.archives-ouvertes.fr/hal-01174137
DOI : 10.1016/j.gca.2015.04.024