Éditeur(s) : HAL CCSD Ocean Drilling Programm
Résumé : This paper provides a summary of postcruise scientific results from Ocean Drilling Program (ODP) Leg 209 available to date, building upon shipboard observations and syntheses summarized in the Leg 209 Initial Results volume. During Leg 209, 19 holes were drilled at 8 sites along the Mid-Atlantic Ridge from 14°43´ to 15°44´N, mainly in residual mantle peridotite intruded by gabbroic rocks, in order to understand the tectonic and structural processes responsible for formation of oceanic lithosphere with abundant residual peridotite exposed on the seafloor coupled with a relatively low proportion of volcanic rocks. Based on proportions of recovered lithologies, the entire area may be underlain by mantle peridotite with ~20%–40% gabbroic intrusions and impregnations. Impregnated peridotites with olivine + two pyroxenes + plagioclase + spinel that apparently formed in equilibrium probably record crystallization from primitive mid-ocean-ridge basalt at pressures of 0.5–0.6 GPa. Metamorphic equilibria record isobaric cooling to ~1100°C at this pressure. Thus, the conductively cooled thermal boundary layer beneath the Mid-Atlantic Ridge in this region is >15 km thick. Combined crystallization and reaction with residual peridotite formed a series of impregnated peridotites recording increasing Na content at nearly constant Mg#; this process could explain some of the variation in fractionation-corrected Na (e.g., Na = 8.0) observed in mid-ocean-ridge basalts. Clinopyroxene textures and compositions record such impregnation processes, and they are particularly well documented for Site 1274. Other Leg 209 gabbroic rocks formed from extensive crystallization of highly evolved melts, indicating that a substantial proportion of melt entering the thermal boundary layer crystallizes entirely beneath the seafloor, with no volcanic equivalent. Alteration of peridotites occurred over a range of temperatures and is the result of three distinct processes: rock-dominated serpentinization with formation of brucite in olivine-rich lithologies, fluid-dominated serpentinization with formation of magnetite and no brucite, and fluid-dominated talc alteration with addition of SiO2 as well as H2O and oxygen. The latter two processes also exhibit detectable trace element metasomatism that is distinct in its character from the igneous impregnation described in the previous paragraph. Microstructures show that most residual peridotites were not ductilely deformed at temperatures less than ~1200°C. Structural and paleomagnetic data require tectonic rotations of relatively undeformed blocks; some rotations probably exceeded 60° around nearly horizontal axes parallel to the rift axis. Rotations occurred along several generations of high-temperature mylonitic shear zones extending deeper than 15 km depth and numerous faults at lower temperature. Early formed shear zones and faults were passively rotated around later features; such a process could have produced low-angle fault surfaces without slip on low-angle faults. This region provides end-member examples of processes that are common at many or most slow-spreading ridges. Osmium isotope ratios indicate an ancient history of depletion for residual peridotites from the 14°–16°N region along the Mid-Atlantic Ridge. Though depleted Os isotope ratios in peridotite have been reported elsewhere along the global ridge system, the values from this region are among the most depleted. In general, Os isotope ratios from mid-ocean-ridge basalts are systematically more radiogenic than Os isotope ratios from ridge peridotite samples, suggesting a polygenetic heterogeneous source for mid-ocean-ridge basalts. Geochemical studies of zircons from Leg 209 gabbroic rocks and impregnated peridotites, together with other ridge and arc-related zircons, indicate that ridge zircons have systematically lower fractionation-corrected U and Th concentrations compared to arc zircons. This observation provides a tool for interpreting the tectonic provenance of ancient detrital zircons and indicates an arclike provenance for Hadean detrital zircons. Geobiological studies and aerobiological studies were also undertaken during Leg 209. The geobiological work found no measurable microbial enhancement of olivine dissolution rate, possibly because the samples from Leg 209 were sterile. The aerobiological study determined that dust from North Africa, collected from the derrick of the JOIDES Resolution during Leg 209, contains a variety of abundant microorganisms.
Proceedings ODP, scientific results, 209

hal-00407966
https://hal.archives-ouvertes.fr/hal-00407966
DOI : 10.2973/odp.proc.sr.209.001.2007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study presents microstructural evidence for deformation-controlled melt organization and for changes in olivine deformation associated with the presence of melt in an 80 m vertical section of the crust-mantle transition zone in the Oman ophiolite. This zone represents an 'end member' case for analyzing feedbacks between deformation and melt distribution in the upper mantle, since it experienced strong shear strains in presence of large melt fractions. It is characterized by a subhorizontal compositional layering at the mm to meter scale, from weakly impregnated dunites to olivine-rich gabbros, which parallels a pervasive foliation containing a strong stretching lineation. The parallelism between the compositional layering and the foliation, the diffuse limits of the layers, the alignment of elongated plagioclase-rich aggregates devoid of internal deformation structures with the elongation of olivine crystals in the dunitic layers, and the sharp compositional changes across some, but not all layer limits suggest deformation plays an essential role on the development of the layering. The variation on a mm-scale of the olivine crystal preferred orientation (CPO) symmetry as a function of the modal content: from axial-[100] symmetry in layers with <70% modal olivine to axial-[010] in more gabbroic levels (<40% olivine), which is repeated over the entire section, implies deformation in presence of variable melt fractions. Axial-[100] olivine CPO in olivine-rich layers is consistent with deformation by dislocation creep under high temperature, low pressure, dry conditions. Axial-[010] olivine CPO patterns imply additional sliding along preferentially wetted (010) grain boundaries, increase in the activity of [001] glide, or transpression localized in the melt-rich layers. Since the change in CPO symmetry is not accompanied by dispersion, instantaneous melt fractions must have remained <30-40% in all layers. The continuous variation in olivine CPO symmetry with decreasing olivine content implies therefore that the former depends on the cumulated strain in presence of melt rather than on the instantaneous melt fraction.
ISSN: 0012-821X

hal-00795508
https://hal.archives-ouvertes.fr/hal-00795508
DOI : 10.1016/j.epsl.2012.10.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : The Erro-Tobbio peridotites (Voltri Massif, Ligurian Alps) represent subcontinental lithospheric mantle tectonically exhumed during Permo-Mesozoic extension of the Europe-Adria lithosphere. Previous studies have shown that exhumation started during Permian times, and occurred along kilometer-scale lithospheric shear zones which enhanced progressive deformation and recrystallization from spinel- to plagioclase-facies conditions. Ongoing field and petrologic investigations have revealed that the peridotites experienced, during uplift, a composite history of diffuse melt migration and multiple episodes of ultramafic-mafic intrusions. In this paper we present the results of field, structural and petrologic-geochemical investigations into a sector of the Erro-Tobbio peridotite unit that preserves well this multiple intrusion history. Melt impregnation in the peridotites is evidenced by significant plagioclase enrichment and crystallization of unstrained orthopyroxene replacing kinked mantle olivine and clinopyroxene; impregnating melts were thus opx-saturated. Melt-rock interaction caused chemical changes in mantle minerals (e.g. Al decrease and REE increase in cpx; Ti and Cr# enrichment in spinel). Nevertheless, clinopyroxenes still exhibit LREE depletion (Ce;N;/Sm;N; = 0.006-0.011), indicating a depleted signature for the percolating melts. Melt impregnation was thus related to diffuse porous flow migration of depleted MORB-type melt fractions that modified their compositions towards opx saturation by mantle-melt interaction during ascent. The impregnated peridotites are intruded by a hectometer-scale stratified cumulate body, mostly consisting of troctolites and plagioclase wehrlites, showing gradational, interfingered contacts with the host mantle rocks. Subsequent intrusion events are revealed by the occurrence of olivine gabbros as decameter-wide lenses, variably thick (centimeter- to meter-scale) dykes and thin dykelets, which crosscut both the peridotite foliation and the magmatic layering in the cumulates. Overall, major and trace element compositions of minerals in the intrusives indicate that they represent variably differentiated cumulus products crystallized from rather primitive N-MORB-type aggregated melts. Slightly more evolved compositions are shown by olivine gabbros, relative to the troctolites and plagioclase wehrlites of the cumulate body. Mineral chemistry features (e.g. the Fo-An correlation and high Na, Ti, Mg# in cpx) indicate that the studied intrusive rocks crystallized at moderate pressure conditions (3-5 kbar, i.e. 9-15 km depth). Our study thus points to a progressive transition from porous flow melt migration to emplacement of magmas in fractures, presumably related to progressive change of lithospheric mantle rheology during extension-related uplift and cooling.
ISSN: 0024-4937

hal-00407669
https://hal.archives-ouvertes.fr/hal-00407669
DOI : 10.1016/j.lithos.2006.06.014

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The 1415 m deep IODP Hole U1309D (Mid-Atlantic Ridge, 30 degrees N) is the second deepest hole drilled into slow spreading oceanic lithosphere. The recovered section comprises essentially gabbroic rocks, with a large range of compositions. The most primitive end-members of the gabbroic sequence, herein referred to as olivine-rich troctolites (ol > similar to 70%), have textures and geochemical compositions intermediate between that of mantle peridotites and primitive cumulates, indicative of melt impregnation processes. We carried out a detailed microstructural study to further characterize the petrogenetic processes leading to their formation, as well as discuss their mode of emplacement and relationship with neighboring mantle lithosphere. In olivine-rich troctolites, olivines range from coarse-grained subhedral crystals, commonly containing well-developed subgrains, to medium-grained rounded crystals with fewer or no substructures. They are embedded in large, undeformed pyroxene and plagioclase poikiloblasts. Olivine substructures reveal dislocation creep that is consistent with activation of the main high-temperature slip systems, dominantly (010)[100]. Olivine crystallographic preferred orientation is very weak but generally shows a relatively stronger, uncommon [001] concentration. These unusual olivine fabrics are interpreted as resulting from melt impregnation of a previously deformed olivine matrix: the solid olivine framework is disrupted by olivine corrosion along grain and subgrain boundaries, and the high-temperature plastic fabric is modified in a liquid-dominated regime. Based on mineral composition and fabrics and in comparison with what is observed in impregnated mantle rocks elsewhere, we posit that olivine represents relicts of mantle peridotites disaggregated by large melt influx, although the mantle origin of olivine is not unequivocally demonstrated yet. Whatever the initial lithology, impregnation by large volumes of melt has strongly modified the original composition and microstructure. If the mantle origin hypothesis is correct, the original olivine fabric could have been efficiently weakened by dunitization prior to disruption of the olivine framework by melt impregnation. Incorporation, at the base of the lithosphere, of small slivers of impregnated dunite into gabbroic sections, trapped between successive igneous units, may be a common mechanism of lower crustal accretion at slow spreading ridges. Extensive melt-rock interaction processes are expected to contribute significantly to the final chemical composition of erupted lavas.
ISSN: 1525-2027

hal-00496391
https://hal.archives-ouvertes.fr/hal-00496391
DOI : 10.1029/2009GC002995

Éditeur(s) : HAL CCSD
Résumé : IODP Hole U1309D (IODP Exp. 304-305, 30°N) and ODP Site 1275 (ODP Lag 209, 15°45?N) sampled two oceanic core complexes, at the Mid-Atlantic Ridge. The recovered rocks are mostly gabbroic with some very primitive and olivine rich (Ol>70%). In Hole U1309D, trace element compositions of clinopyroxene and plagioclase poikiloblasts from olivine-rich rocks ndicate that they crystallized from the same melt in all lithologies. Olivine trace element compositions are in disequilibrium with the two other minerals. Olivine crystallographic preferred orientations are weak, with a relatively strong uncommon [001] concentration but consistent with deformation by dislocation creep with activation of the high temperature (010) [100] slip system, commonly described in asthenospheric mantle. The joint study of geochemical processes and microstructures in these rocks suggest a complex crystallization history in an open system with percolation of large volume of MORBtype melt and interaction with the depleted shallow mantle. Olivine-rich rocks are interpreted as the ultimate residue of these melt-mantle reaction processes. At Site 1275, the formation of the more evolved rocks of the gabbroic series is not related to the impregnation event creating olivine-rich rocks.
These rocks represent late magmatic injections, which are completely crystallized at depth as intrusivegabbroic bodies. The results presented in this thesis are consistent with the formation of oceanic core complexes associated with relatively strong magmatic activity, and with the crystallization of most of melt in the lithosphere without basaltic counterpart erupted on the seafloor.
Le puits IODP U1309D (Exp. IODP 304-305, 30°N) et le Site ODP 1275 (Leg ODP 209, 15°45'N) ont permis d'échantillonner deux core complexes océaniques de la dorsale Médio-Atlantique. Les roches récupérées sont principalement gabbroïques dont certaines très primitives et riches en olivine (ol >70%). Dans le puits U1309D, les compositions en éléments en trace des poeciloblastes de clinopyroxène et de plagioclase des roches riches en olivine indiquent qu'ils précipitent depuis le même magma dans toutes les lithologies. La composition en éléments en trace des olivines est en déséquilibre avec ces deux minéraux. Les fabriques cristallographiques de l'olivine sont faibles avec une concentration sur [001] inhabituelle, néanmoins compatibles avec une déformation plastique de haute température, avec l'activation du système de glissement (010) [100] communément décrit dans le manteau asthénosphérique. L'étude conjointe des caractéristiques géochimiques et microstructurales de ces roches met en lumière une histoire complexe de cristallisation dans un système ouvert où de larges volumes de magma de type MORB ont percolé et interagi avec le manteau appauvri superficiel. Ces roches riches en olivine représenteraient le résidu ultime de ces réactions liquide-manteau. Au site 1275, la formation des roches les plus évoluées de la série n'apparaît pas liée à l'événement d'imprégnation formant les roches riches en olivine. Ces roches correspondent à des injections tardives de magma qui ont entièrement cristallisé en profondeur sous forme de plutons intrusifs. Les résultats présentés dans ce mémoire sont compatibles avec une formation des core complexes océaniques associée à une activité magmatique relativement importante, et à une cristallisation complète de tout ou partie de ces magmas dans la lithosphère sans contre-partie volcanique en surface.
https://tel.archives-ouvertes.fr/tel-00354807

tel-00354807
https://tel.archives-ouvertes.fr/tel-00354807
https://tel.archives-ouvertes.fr/tel-00354807/document
https://tel.archives-ouvertes.fr/tel-00354807/file/these_MD.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
IODP Hole U1309D (Atlantis Massif, Mid-Atlantic Ridge 30 degrees N) is the second deepest hole drilled into slow spread gabbroic lithosphere. It comprises 5.4% of olivine-rich troctolites (->70% olivine), possibly the most primitive gabbroic rocks ever drilled at mid-ocean ridges. We present the result of an in situ trace element study carried out on a series of olivine-rich troctolites, and neighbouring troctolites and gabbros, from olivine-rich intervals in Hole U1309D. Olivine-rich troctolites display poilkilitic textures; coarse-grained subhedral to medium-grained rounded olivine crystals are included into large undeformed clinopyroxene and plagioclase poikiloblasts. In contrast, gabbros and troctolites have irregularly seriate textures, with highly variable grain sizes, and locally poikilitic clinopyroxene oikocrysts in troctolites. Clinopyroxene is high Mg# augite (Mg# 87 in olivine-rich troctolites to 82 in gabbros), and plagioclase has anorthite contents ranging from 77 in olivine-rich troctolites to 68 in gabbros. Olivine has high forsterite contents (82-88 in olivine-rich troctolites, to 78-83 in gabbros) and is in Mg-Fe equilibrium with clinopyroxene. Clinopyroxene cores and plagioclase are depleted in trace elements (e.g., Yb-cpx similar to 5-11 x Chondrite), they are in equilibrium with the same MORB-type melt in all studied rock-types. These compositions are not consistent with the progressively more trace element enriched (evolved) compositions expected from olivine rich primitive products to gabbros in a MORB cumulate sequence. They indicate that clinopyroxene and plagioclase crystallized concurrently, after melts having the same trace element composition, consistent with crystallization in an open system with a buffered magma composition. The slight trace element enrichments and lower Cr contents observed in clinopyroxene rims and interstitial grains results from crystallization of late-stage differentiated melts, probably indicating the closure of the magmatic system. In contrast to clinopyroxene and plagioclase, olivine is not in equilibrium with MORB, but with a highly fractionated depleted melt, similar to that in equilibrium with refractory oceanic peridotites, thus possibly indicating a mantle origin. In addition, textural relationships suggest that olivine was in part assimilated by the basaltic melts after which clinopyroxene and plagioclase crystallized (impregnation). These observations suggest a complex crystallization history in an open system involving impregnation by MORB-type melt(s) of an olivine-rich rock or mush. The documented magmatic processes suggest that olivine-rich troctolites were formed in a zone with large magmatic transfer and accumulation, similar to the mantle-crust transition zone documented in ophiolites and at fast spreading ridges.
ISSN: 0009-2541

hal-00420916
https://hal.archives-ouvertes.fr/hal-00420916
DOI : 10.1016/j.chemgeo.2009.02.013

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : The Oman ophiolite consists of several massifs cropping out along a 500 km long band trending NW-SE along the coast of Oman; it is one of the best exposed sections of oceanic crust and mantle in the world. There is a gradient in igneous processes and composition in the ophiolite, with the northern massifs recording a polygenetic igneous history involving an increasingly important subduction component, whereas the southern massifs were formed primarily via a mid-ocean ridge basalt (MORB)-like, single-stage process at a submarine spreading ridge. In this study we use geochemical data from Wadi Tayin, which is one of the southern massifs of the Oman ophiolite, to constrain the composition and genesis of oceanic crust and upper mantle. The Wadi Tayin harzburgites are residues of partial melting that are as depleted as the most depleted mid-ocean ridge peridotites. They have low middle- to heavy rare earth element ratios, most probably reflecting melting close to and beyond the exhaustion of clinopyroxene. Like many abyssal peridotites, the Wadi Tayin samples show enrichment in highly incompatible elements, giving rise to U-shaped MORB-normalized trace element patterns. We favor the idea that this is caused by enrichment of highly incompatible elements along grain boundaries in peridotite, which may be the result of near-equilibrium partitioning between grain boundaries and grain interiors, rather than disequilibrium processes. Equilibrium partitioning between crystals and grain boundaries during melting and melt extraction is also our preferred explanation for ubiquitous high Pb contents relative to Ce and La in our samples as well as in most abyssal peridotites. The Wadi Tayin samples record substantial variability in terms of osmium isotopic composition and platinum group element (PGE) concentrations. The more radiogenic nature of the dunites and impregnated peridotites compared with the residual harzburgites may be due to relatively high Os-187/Os-188 in melt transported through the dunites. The presence of residual peridotites with whole-rock osmium isotopic compositions less radiogenic than MORB may be explained by melting of a veined (upwelling) mantle forming mixed melts in which much of the Os derives from veins with high Re/Os in a matrix of previously depleted peridotite. An important result of this study is that the shallowest samples are refertilized (i.e. anomalously enriched in incompatible elements), and record relatively high metamorphic closure temperatures. These observations suggest that migrating melt underwent crystallization during rapid cooling in the uppermost mantle during and immediately after ridge magmatism. A variety of geothermometers all yield the result that the stratigraphically highest harzburgites equilibrated at higher temperature than the deeper ones. The systematic decrease in closure temperature with increasing depth below the Moho transition zone probably reflects systematic variation in cooling rate as a function of depth in the mantle section. We hypothesize that the refertilization and higher closure temperatures recorded by the uppermost mantle samples are linked. More rapid cooling led to higher closure temperatures, and to partial crystallization of migrating melts in the shallowest part of the mantle section, yielding slightly elevated abundances of elements such as Ca and Na, and incompatible trace elements.
ISSN: 0022-3530

hal-00456056
https://hal.archives-ouvertes.fr/hal-00456056
DOI : 10.1093/petrology/egp077

Éditeur(s) : HAL CCSD Elsevier
Résumé : Carbon emission at volcanic centers requires a constant balance between output (mostly by volcanism, either at plate boundaries or intraplate) and input (mostly at trench settings) of carbon from and to the Earth's mantle. The form of carbon that resides in the mantle is controlled by depth (pressure) and oxygen fugacity, the latter in turn depending on the depth and the concentration of iron in the mantle. In the shallow, lithospheric mantle, carbon is likely to be present in the oxidized form of CO2 (except under cratons where carbon is reduced to graphite or diamond). Below approximately 90 km, in the asthenosphere, the oxidized form of carbon is carbonate, either mineral or melt, depending on the thermal regime. At depths greater than approximately 150 km, the asthenospheric mantle is too reducing for carbon to stay in its oxidized form and only diamond is present, unless there is sufficient hydrogen to form reduced C–H fluids. Hence, the region located in the depth range of 90 to 150 km deep is where carbonatitic melts can most likely be produced and impregnate the surrounding mantle through metasomatism. The upper bound of this region is called the carbonate ledge. This limit prevents carbonate (either solid or molten) from ascending because of degassing and CO2 liberation. The lower bound is a redox front where redox melting (that is, melting caused by oxidation) may take place in an ascending portion of carbon-containing mantle. Carbonatite eruptions and presence of carbonate mineral inclusions in deep-seated diamonds provide evidence that these boundaries can be trespassed in some cases.An analysis of the experimental data that has bearing on silicate melting in the presence of carbon further shows that the carbonate ledge is a melting curve with a negative or flat Clapeyron (dP/dT) slope. In the carbonated ultrabasic (peridotite) systems, the carbonate ledge is located between ~ 2–3 GPa. The ledge divides the pressure–temperature space into a region of low-pressure silicate melt production, and a high-pressure region where carbonatites can be produced. Carbonatitic melts in equilibrium with mantle peridotite have compositions close to dolomitic (approximately equal amounts of Ca and Mg) with a general trend of becoming markedly more magnesian with increasing pressure. Calcic carbonatites may be stable at pressures < 2 GPa if clinopyroxene is absent. At mantle transition zone pressure range, there seems to be a melting temperature decrease (negative fusion slope), which may be caused by the stabilization of majoritic garnet.The carbonated basic (broadly eclogitic) system is more complex than the peridotitic one, because of the strong control of bulk silicate composition on melting temperatures, and hence, on melt composition. In carbonated eclogite systems, we propose that the effect of bulk composition upon all observed features can perhaps be related to silica super-saturation, or lack thereof. In some cases, high calcium (> 80 mol% CaCO3) melts can be produced, making the melting of carbonated eclogites an appealing scenario for the genesis of calcio-carbonatites in the Earth's mantle. Comparison with modeled pressure–temperature paths of subducted oceanic lithosphere shows that fusion of carbonated eclogite at depths shallower than 200 km should be expected for hot (Cascadian-type) subduction thermal regimes. On the other hand, in the case of cooler thermal regimes (Honshu-type, for instance), subducted carbonates may be stable to greater depths in Earth at trench settings, depending on the bulk composition of the system.Furthermore, high-pressure experiments show evidence of a continuum among carbonatitic, kimberlitic, melilititic, and basaltic liquids, for increasing melting degree of carbonated peridotite. This continuum has not been documented in the case of fusion of carbonated eclogite. It may be present, however, when certain sediments are fused, although the silicate melts are granitic to rhyodacitic instead of being kimberlitic in composition. Additional high-pressure work on phase relations in the simple binary system CaCO3–MgCO3 and specific focus on oxide solubility in the vapor phase have the potential to further clarify phase relations on complex silicate–carbonate systems at mantle conditions.
ISSN: 0009-2541

hal-01277770
https://hal.archives-ouvertes.fr/hal-01277770
DOI : 10.1016/j.chemgeo.2015.05.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The New Caledonia ophiolite (Peridotite Nappe) is dominated by mantle lithologies, composed of forearc-related refractory harzburgites and minor lherzolites in both the spinel and plagioclase facies.In this study, a comprehensive geochemical data set (major, trace elements and Sr–Nd isotopes) is used to constrain the mantle evolution of the lherzolites and their relationships with the basalts from the Poya Terrane, which tectonically underlies the mantle rocks. The majority of the lherzolites are low-strain porphyroclastic tectonites. They likely record an asthenospheric origin followed by re-equilibration at lithospheric conditions, as supported by geothermometric estimates (T = 1100–940 °C and 920–890 °C for porphyroclastic and neoblastic spinel-facies assemblages, respectively). Olivine composition (Fo = 88.5–90.0 mol%), spinel Cr# ([molar 100 • Cr/(Cr + Al)] = 13–17) and relatively high amounts (7–8 vol%) of Al2O3- and Na2O-rich clinopyroxene (up to 0.5 and 6.5 wt.%, respectively) indicate a moderately depleted geochemical signature for the spinel lherzolites. Bulk rock and clinopyroxene rare earth elements (REE) patterns display a typical abyssal-type signature, i.e. steeply plunging LREE accompanied by nearly flat HREE to MREE. Clinopyroxene REE compositions of the spinel lherzolites may be reproduced by small amounts of fractional melting of a garnet lherzolite precursor (~ 4%), followed by 4%–5% melting in the spinel peridotite field. The plagioclase lherzolites show melt impregnation microstructures, Cr- and Ti-rich spinels and incompatible trace element enrichments (REE, Ti, Y, and Zr) in bulk rocks and clinopyroxenes. Impregnation modelling for these elements suggests that the plagioclase lherzolites originated from residual spinel lherzolites by entrapment of highly depleted (non-aggregated) MORB melt fractions in the shallow oceanic lithosphere. Nd isotope compositions of the investigated peridotites are consistent with derivation from an asthenospheric mantle source that experienced a recent MORB-producing depletion event. This evolution was most likely accomplished in a spreading ridge. However, geochemical trace element modelling and Nd isotopes do not support a genetic mantle–crust link between the lherzolites and enriched-MOR-type basalts from the Poya Terrane.
ISSN: 0024-4937

hal-01412440
https://hal.archives-ouvertes.fr/hal-01412440
DOI : 10.1016/j.lithos.2016.04.030

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : International audience
The Jurassic Mirdita ophiolite crops out in the western branch of the Hellenide-Dinaride ophiolite belt in the Balkan Peninsula; it represents a remnant of the Tethyan oceanic lithosphere developed between the Apulian and Pelagonian microcontinents. Emplaced during the Cretaceous on the western margin of Pelagonia, the Mirdita ophiolite was involved in southwestward thrusting of the Hellenide-Dinaride tectonic units during the Eocene alpine tectonics. It was little affected, however, by these alpine events as marked by nearly horizontal Cretaceous limestone deposits overlying the ophiolite. A continuous section of Middle Jurassic oceanic crust, including thin gabbros, a N-S-trending sheeted dike complex, and extrusive rocks, is exposed in the central part of the ophiolite and thickens eastward within a regional, N-S-trending synform. Peridotite massifs exposed along the western and eastern edges of this synform show major structural and petrological differences. The eastern ultramafic domain has a harzburgitic mantle exhibiting a high-temperature asthenospheric foliation dipping steeply to moderately to the west. Major chromite deposits are restricted to these eastern ultramafic massifs. The western ultramafic domain has a zoned mantle, with asthenospheric harzburgite exposed at its western margin, progressively replaced eastward by plagioclase-peridotites that were highly strained at low temperatures, and that are bounded by amphibole-peridotites along with crustal rocks. The occurrence of plagioclase is ascribed to melt impregnation processes that occurred immediately before or during intense lithospheric deformation. The gabbros in the eastern massifs are thicker (1-2 km and layered, whereas they are highly thin and discontinuous in the western massifs. Mantle peridotites of the western massifs locally are in direct contact with the overlying diabase and volcanic rocks along ductile shear zones. Development of epidote-amphibolite facies metamorphism in upper-crustal rocks was produced by hydrothermal alteration in the oceanic realm, and was intense and widespread in the western domain. The Mirdita ophiolite likely originated in a short-lived, narrow ocean basin, which was closed during the Middle Jurassic by eastward overthrusting of the western domain, and westward subduction of the eastern domain. This constrictional phase was followed by dextral oblique convergence between the Pelagonian and Apulian microcontinents. This model implies a parautochtonous origin of the Mirdita ophiolite between these two microcontinents.
ISSN: 0020-6814

hal-00456063
https://hal.archives-ouvertes.fr/hal-00456063
DOI : 10.1080/00206810902823982

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Analysis of the microstructures in the km-scale mantle shear zone that separates the northern and the central parts of the Lanzo peridotite massif provides evidence of an evolution in time and space of deformation processes accommodating shearing in the shallow mantle within an extensional setting. This shear zone displays an asymmetric distribution of deformation facies. From south to north, gradual reorientation of the foliation of coarse porphyroclastic plagioclase-bearing peridotites is followed by development of protomylonites, mylonites, and mm-scale ultramylonite bands. A sharp grain size gradient marks the northern boundary. Early deformation under near-solidus conditions in the south is recorded by preservation of weakly deformed interstitial plagioclase and almost random clinopyroxene and plagioclase crystal orientations. Feedback between deformation and melt transport probably led to melt focusing and strain weakening in the shear zone. Overprint of melt-rock reaction microstructures by solid-state deformation and decrease in recrystallized grain size in the protomylonites and mylonites indicate continued deformation under decreasing temperature. Less enriched peridotite compositions and absence of ultramafic dykes or widespread melt-impregnation microstructures north of the shear zone and clinopyroxene and amphibole enrichment in the mylonites and ultramylonites suggest that the shear zone acted as both a thermal barrier and a high-permeability channel for late crystallizing fluids. These observations, together with chemical data indicating faster cooling of central Lanzo relative to the northern body, corroborate that this shear zone is a mantle detachment fault. All deformation facies have crystal preferred orientations consistent with deformation by dislocation creep with dominant activation of the (010)[100] and (100)[001] systems in olivine and orthopyroxene, respectively. Dynamic recrystallization produces dispersion of olivine CPO but not a change of dominant deformation mechanism. Evidence for activation of grain boundary sliding is limited to mm-scale ultramylonite bands, where solid-state reactions produced very fine grained polymineralic aggregates. Except for these latest stages of deformation, strain localization does not result from the microstructural evolution; the grain size decrease is a consequence of the need to deform a rock volume whose strength continuously increases because of decreasing temperature conditions. Strain localization in the intermediate levels thus essentially results from the more localizing behavior of both the deep, partially molten, and shallow parts of this extensional shear zone distribution.
ISSN: 1525-2027

hal-00644844
https://hal.archives-ouvertes.fr/hal-00644844
DOI : 10.1029/2011GC003627

Éditeur(s) : HAL CCSD
Résumé : The northern Mirdita ophiolite massifs in Albanian Dinarides formed at a slow-spreading ridge, active during the Jurassic (160–165 Ma). They share a common horizontal Jurassic–Lower Cretaceous sedimentary cover showing that they were not deeply and intrinsically affected by later Alpine thrusting. The western massifs of Mirdita, first oceanic core complex (OCC) and detachment shear zone described in ophiolites, compare with OCCs in slow-spreading ridges and provide continuous exposure of the deep internal structure of this system, revealing its kinematics, thanks to detailed structural mapping in peridotites and gabbros. The Mirdita detachments root in the Moho transition zone (MTZ), a weak zone at the top of asthenospheric mantle, where basaltic melts impregnate dunites. The OCC domes are plagioclase-amphibole–bearing mylonitic peridotites, ∼400 m thick, grading downward within 200 m to harzburgitic mantle. The mylonitic detachments crossed Moho beneath a NNE-SSW–trending ridge. On the western side of OCC domes, the hanging wall of the ridge, crustal gabbros, and basalts are still preserved, despite being deeply affected by hydrothermal alteration. From there, the partially molten MTZ was detached as a shear zone, mixing with lower gabbros. The OCC emerged, migrating upsection and eastward over 5 km. Finally, the OCC front is observed in hornblende-rich syntectonic mylonites derived from upper gabbros and from the overlying former lid. Serpentinization is static within these mylonites. A low-temperature detachment fault is expressed as a sheared antigoritic mélange at the margin of the mylonitic shear zone. Asthenospheric flow in the harzburgitic mantle beneath the ridge of origin has been preserved below the OCC rooting. The dominant asthenospheric flow direction trends parallel to the ridge axis. This mantle flow rotates over 200 m into the low-temperature mylonitic detachments, where OCC motion turns transversal to the ridge. Crystal preferred orientation measurements on six samples point to brown hornblende crystal growth during mylonitic flow and illustrate the change of olivine intra-crystalline slip system in mylonites compared to porphyroclastic harzburgite.
ISSN: 1553-040X

hal-01504440
https://hal.archives-ouvertes.fr/hal-01504440
DOI : 10.1130/GES01383.1