Éditeur(s) : HAL CCSD Elsevier
Résumé : Folds with hinge lines subparallel to stretching lineation are common features in shear zones and represent extreme cases of fold modification. However, their microstructures and in particular their kinematic significance remain poorly understood. Here we describe the meso- and micro-scale structures and crystallographic preferred orientation (CPO) of quartz and muscovite from a metric-scale shear-modified fold from Plattjen, Saas Fee, Western Internal Alps. The studied fold is of class-2 and the samples collected around the fold have essentially the same microstructures. Quartz [c]-axes plotted in the tectonic coordinate system exhibit an apparent reverse obliquity on opposing limbs. Muscovite fabrics are controlled essentially by the orientation of {001} planes. If the CPO data are plotted in a common reference frame (e.g. either fold or geographical), all samples exhibit essentially the same patterns for both minerals. In particular, relative to the fold axis and axial surface, the reversal of quartz CPO obliquity on opposing limbs is no longer evident. The small obliquity (~ 15°) between the intersection lineation of the two planes of {001} of muscovite and the fold axis results in the apparent reversal of shear sense on opposite limbs when viewing the CPO related to the macroscopic fabric. The homogeneity of the microstructures and CPOs of quartz and muscovite across the fold support the interpretation that the fold developed during simultaneous activation of heterogeneous and homogeneous simple shear, with the former responsible for fold development and the latter responsible for fold rotation and the overwhelming of the heterogeneous deformation. These processes led to the observed parallelism between fold hinge line and local stretching lineation.
ISSN: 0040-1951

hal-00824537
https://hal.archives-ouvertes.fr/hal-00824537
DOI : 10.1016/j.tecto.2011.03.003

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : A differential effective medium (DEM) model is used to predict elastic properties for a set of porous and anisotropic aggregates, comprised of mixtures of calcite and muscovite. The DEM takes into consideration an anisotropic background medium with triclinic or higher symmetry, in which inclusions of idealized ellipsoidal shape are added incrementally. In general, the calculated elastic properties of a solid that contains inclusions representing "dry" pores/cracks are strongly dependent on the orientation and aspect ratio of the inclusions. Aspect ratios of inclusions in the synthetic aggregates, which consist of air-filled pores, are estimated from anisotropy of magnetic susceptibility (AMS) of samples whose pore space has been impregnated with a colloidal ferrofluid. The AMS derived pore shape geometry is used as an input value for inclusions in the DEM. Modeling results are compared with laboratory determined elastic properties, measured with ultrasonic waves. Calculated shear wave velocities agree in general well with laboratory measured S wave velocities, whereas calculated P wave velocities are typically 0.5-1.1 km/s higher than measured values. Differences between calculated and measured P wave velocities are attributed mainly to incomplete and biased ferrofluid saturation of pores. Spherical pores are preferably filled during imbibition, in comparison to thin cracks, which leads to overprediction of the calculated P wave velocities. The amount of ferrofluid that fills the pore space is dependent on the ratio of calcite to muscovite and the load used for compaction during sample synthesis. The permeability decreases with increasing muscovite content and increasing compaction load. Incomplete saturation of samples with high-muscovite content is confirmed by X-ray microtomography density contrast imaging of dry and ferrofluid saturated specimens.
ISSN: 0148-0227

hal-00617717
https://hal.archives-ouvertes.fr/hal-00617717
DOI : 10.1029/2010JB007750

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Major and trace element signatures and Sr-Nd-Pb isotope data for muscovite (Ms)-bearing amphibolite blocks and associated muscovite-bearing trondhjemite and quartz-muscovite rocks from the Sierra del Convento melange (eastern Cuba) indicate that Proto-Caribbean oceanic crust underwent wet partial melting processes during Mesozoic subduction and after accretion to the upper plate. Trace element normalized patterns of Ms-bearing amphibolites are enriched in light rare earth elements (LREE) and large-ion lithophile elements (LILE) and evidence variable trace element transfer from the Proto-Caribbean subducting slab to the mantle wedge. Ms-bearing trondhjemites show LREE enrichment and HREE depletion and have geochemical features similar to adakites, including SiO2>56 wt.%, high Na2O contents (5.5-9.0 wt.%) and high Sr/Y (16-644). We consider that the trondhjemites represent primary and natural melts formed by deep partial melting of the subducting slab which did not significantly react with the mantle wedge before intrusion in the subduction channel. The Ms-bearing trondhjemites show different geochemical and petrological signatures compared with the Ms-free tonalites-trondhjemites from Sierra del Convent, that are interpreted as primary slab melts. These differences support the idea that partial melting processes in the Sierra del Convento subduction channel were triggered by the infiltration of fluids derived from three distinct subducted sources: sediments, altered mid-ocean ridge basalts (MORB), and serpentinites. In this scenario, the pegmatitic quartz-muscovite rocks, which are highly enriched in LILE, probably represent the crystallization products of fluids derived by differentiation of the trondhjemitic melts.
ISSN: 0024-4937

hal-00669881
https://hal.archives-ouvertes.fr/hal-00669881
DOI : 10.1016/j.lithos.2011.07.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Melt generation in the continental crust is thought to significantly influence seismic bulk velocities and anisotropy, although existing laboratory data provide limited constraints on such seismic attributes. In this study we measured ultrasonic compressional wave speeds (Vp) and anisotropy during sample compaction, mica-breakdown and melt-generation in synthetic, foliated quartz–muscovite aggregates. Measurements were performed at peak conditions of 300 MPa hydrostatic confining pressure and 750 °C, over a six hour time period, for three separate samples where wave propagation directions were aligned at 0°, 45° and 90° with respect to the foliation plane. The experiments are initially marked by sample compaction and rapid reduction in porosity (from 25% to <2 vol%), with a corresponding increase in Vp. During initial stages of the experiment Vp ranges from 4.65 to 5.45 km/s, depending on the direction of the P wave propagation, resulting in up to ∼16% anisotropy, which originates mainly from the preferred orientation of muscovite and possible incipient melt lenses oriented parallel to foliation. As the experiment progresses the bulk Vp decreases gradually and Vp anisotropy drops from ∼16% to ∼2% after five hours into the experiment. The drop in anisotropy is caused by muscovite-breakdown and increasing amount of partial melting of the aggregate. The bulk velocities are considerably lower than predicted for a mixture of muscovite and β-quartz (stable at 300 MPa and 750 °C). Thermodynamic modeling indicates that mica breakdown and production of melt with ∼2 wt% dissolved water in the aggregate can explain the low Vp, even though β-quartz is stable; the modeled Vp is ∼4.75 km/s at 300 MPa and 750 °C. These ultrasonic attributes signify movement of the melt to fill vacant pores and coating grain boundaries, effectively connecting melt films and reducing seismic anisotropy. The results may apply to regions where crustal melting is on-going, in particular regions of elevated temperature that are only weakly deforming, with coupled anomalously low bulk velocities and seismic anisotropy.
ISSN: 0012-821X

hal-01243569
https://hal.archives-ouvertes.fr/hal-01243569
DOI : 10.1016/j.epsl.2015.05.039

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A set of synthetic aggregates, containing mixtures of calcite and muscovite, were compacted with varying uniaxial loads ranging from 20 MPa up to 400 MPa. Their elastic properties have been measured using compressional and shear waves in confining hydrostatic pressures up to 475 MPa. Measured seismic velocities are shown to depend on 1) the ratio of calcite to muscovite, 2) the uniaxial load used during sample manufacturing, and 3) the porosity amount prior to velocity measurements. The matrix framework may also affect the seismic velocities, but this effect is not easily quantifiable. In general, measured seismic velocities decrease with increasing muscovite content and porosity. Elastic properties have been calculated based on texture measurements, which were obtained by neutron diffraction. The calculated velocities are based on the calcite and muscovite single crystal elastic tensors, their orientation distribution functions, and their modal fractions. A large discrepancy is apparent between calculated and measured velocities, where the former always overestimate the actual velocities. Shear waves display less of a difference between calculated and measured values, than do compressional waves, indicating that waves propagating by shearing are less affected by sample porosity and matrix framework. A better agreement between measured and calculated seismic velocities arises when the initial porosity is taken into account, using a differential effective medium model. Seismic anisotropy is evident from both measured and calculated velocities, and is low for samples containing pure calcite, but becomes prominent as the muscovite concentration increases. The intensity of anisotropy further depends on the uniaxial load used during sample compaction and the initial porosity.
ISSN: 0148-0227

hal-00512666
https://hal.archives-ouvertes.fr/hal-00512666
DOI : 10.1029/2009JB006523

Éditeur(s) : HAL CCSD
Résumé : International audience
Tsavorite is exclusively hosted in the Neoproterozoic Metamorphic Mozambique Belt (NMMB). The gemstone mines, widespread between Kalalani (Tanzania) and Mgama Ridge (Kenya), define a continuous corridor over a hundred kilometers in length. The tsavorite is hosted by a metasedimentary sequence defined as the Kurase tsavorite-bearing metasediments (Kurase-TB metasediments) that also hosts rubies. These metasediments underwent amphibolite-facies metamorphism and are surrounded by granulitic gneisses that are also of sedimentary origin (the Kurase high-temperature gneisses). All these rocks lie below the Kasigau Group, a unit dominated by granulite-facies metamagmatic rocks.To constrain the timing of events that led to this peculiar occurrence of tsavorite, we have performed geochronological analyses of thin sections and of separated grains of zircon, monazite, and rutile using LA-ICP-MS and ID-TIMS, as well as 40Ar/39Ar of muscovite and phlogopite from various lithologies. The results show that the different terranes were metamorphosed synchronously between 620–580 Ma but under different P-T strain conditions. The Kurase-HT gneisses and the rocks from the Kasigau Group are highly strained and underwent granulite-facies metamorphism with abundant partial melting and emplacement of felsic melts between 620 and 600 Ma. Textural observations also underlined a late regional water flux controlling the occurrence of V-free muscovite and monazite mineralizations at 585 Ma. The latter event can be related to the activity of the Galana shear zone, in the east. The Kurase-TB metasediments escaped strain and partial melting. They record amphibolite-facies conditions with static heating, since initial sedimentary structures were locally preserved. The age of the tsavorite mineralization was inferred at 600 Ma from metamorphic zircon rims and monazite from the closest host-rocks, sampled in the mines. Hence, tsavorite crystallization occurred statically at the end of the metamorphic event, probably when the temperature and the amount of volatiles were at maximum levels.Conversely, the ruby formed by local metasomatism of felsic dikes and isolated ultramafic bodies. The rubies are older and zircons and monazites from a ruby-bearing felsic dike (plumasite) were dated at 615 Ma. Finally, data from rutile and micas indicate a global cooling below 430 °C of the whole region between 510 and 500 Ma.
The Canadian Mineralogist

hal-01616037
https://hal.archives-ouvertes.fr/hal-01616037
https://hal.archives-ouvertes.fr/hal-01616037/document
https://hal.archives-ouvertes.fr/hal-01616037/file/JEM.pdf
DOI : 10.3749/canmin.1700019

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Kazdag Massif exposes an extensional metamorphic dome in the Biga Peninsula of northwest Turkey, bounded on both flanks by detachments and/or shear zones. The northern flank is marked by the extensional Alakeci shear zone (ASZ), with poorly known P-T-t path. We therefore focus on metamorphic conditions and temporal history of the ASZ to determine its tectono-metamorphic evolution. ASZ mylonites were derived from both the footwall Kazdag Massif core metamorphic rocks and the hanging wall Cetmi melange lithologies. The mylonitic fabrics in the ASZ depict a top-to-the NNE shearing, parallel to the NNE-plunging stretching lineation and NNW-dipping mylonitic foliation. This geometry implies normal sense movement i.e. north-side down-dip extensional displacement along this flank of the Kazdag Massif. The northward transition from ductile to brittle-ductile shear regime through the ASZ shows that the non-coaxial deformation occurred at decreasing temperatures and degree of metamorphism. The paragenesis in equilibrium of the mylonitic gneisses and schists contains quartz + feldspar + muscovite + biotite + garnet staurolite, with late retrogressive chlorite after biotite and garnet. Calculated thermo-barometric conditions for ASZ rocks yielded pressures between 6.9 and 5.7 kbar and temperatures between 706 and 587 degrees C, which constrain the peak metamorphism. The mylonitic rocks supplied isochron Ar-39/Ar-40 mica ages between 26.97 and 24.19 Ma, which we interpret to date the cooling of the mylonites following the P-T decrease across the ASZ. The metamorphic data support the structural record and strengthen the extensional character of the ASZ. The transition from sillimanite-bearing footwall Kazdag Massif core gneisses in the deeper structural levels to chlorite schists; towards the shallow structural levels at the top of the ASZ, is consistent with an extensional exhumation of the metamorphic pile. These data allow us to determine the peak P-T conditions and the temporal evolution in the northern flank of the Kazdag Massif, where Late Oligocene extensional exhumation was assisted by NNE-directed ductile-brittle ASZ, which had operated from amphibolite to greenschist facies. The ASZ, together with similar time-constrained ductile-brittle activity of SW-directed detachment along the southern flank of the massif, collectively indicates a bivergent mode of extension in the western Kazdag Massif. The latter is likely influenced by magmatic activity spatially and temporally related to these extensional zones. At the regional scale, the bivergent tectono-metamorphic pattern of the Kazdag Massif is similar to those observed on other places of the north-central Aegean domain.
ISSN: 0024-4937

hal-00445246
https://hal.archives-ouvertes.fr/hal-00445246
DOI : 10.1016/j.lithos.2009.02.010

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Strain and strain rate partitioning in partially molten rocks are two of the important mechanisms that govern the process of coupling and/or decoupling of the partially molten lithosphere. Consequently, the proportion of partial melt and crystals and their network in partially molten rocks influence the degree of the partitioning along with the bulk rheology of the system. This study explores the possible role of finite strain and strain rate on the rate and volume of partial melting and crystallization in a metapelitic system undergoing deformation. Cylinders of synthetic quartz-muscovite aggregate (7: 3 volume ratio) were deformed in torsion at 750 C, 300 MPa and constant shear strain rate ((gamma) over dot = 3 x 10(-4) s(-1)) for finite shear strains (gamma) 1-15. The deformed samples were studied along the longitudinal tangential ( LT) and axial ( LA) sections to obtain the data along a range of strain rates for a given finite strain and vice versa. The results showed that deformation plays an important role on the kinetics of partial melting and crystallization. With increasing strain rate, amount and rate of crystallization comprise the volumetrically dominant process compared to partial melting at a given finite strain. In contrast, when the strain rate is constant, partial melting is the dominant process over crystallization up to moderate strain (gamma < 5). The dominant process reverses at higher strain, and the system shows more crystallization than partial melting. Application of the experimental data to geological systems implies that for metapelites a significant amount (similar to 20%) of partial melt can generate at high strain rate and moderate strain (gamma similar to 7), but at high strain (gamma = 15) the system is melt depleted. Under such conditions, decoupling should take place in brittle-ductile mode. On the other hand, rocks undergoing deformation with low strain rates and strain (gamma < 3) contain more than 25% partial melt, which can act as a major decoupling agent by localizing ductile shear zones.
ISSN: 0148-0227

hal-00617714
https://hal.archives-ouvertes.fr/hal-00617714
DOI : 10.1029/2010JB007865

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite bodies are exhumed extensions at depth of shallow structural level brittle faults. They are characterised by intense strain localisation involving large volumes of middle to lower continental crust. The analysis of shear zone geometry and microstructures is a useful tool to decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of the deformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However, only rare examples provide geochronological data that can be unambiguously interpreted and cooling, recrystallisation and neocrystallisation are difficult to tell from each other. Thus, time-scales over which major mylonite zones develop and remain active under ductile conditions as well as their strain rate often remain poorly documented. We investigated two sections across the South-Armorican Shear Zone (SASZ), a crustal-scale pluri-km thick dextral shear zone active during a single tectonic event of late-Variscan age and associated with syntectonic granite emplacement.. Finite strain profiles on these cross-sections, quantified from average Quartz grain-size in 34 samples, show a strong deformation partitioning towards the center of the SASZ, with a decrease, for each section, from 150µm in slightly deformed zones to less than 7-5 µm in the core of the ultramylonite. Furthermore, toward the core of the SASZ, development of a penetrative shear band network progressively eliminates lenses of less deformed rocks and results in homogenisation of the Quartz grain sizes. In parallel, we performed in-situ UV-laser Ar/Ar dating on the fabric-forming white micas. White micas population can be decomposed into inherited muscovites carried by the folation and newly-formed, syn-tectonic substituted phengites located along the shear bands yielding 2 age groups for each sample. Along the profiles, the difference between these two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, mylonite-forming phengites yielded the same age irrespectively of their position on the section or of the rock strain.. On the regional point of view, this study brings deformation-ages for the late-orogenic evolution of the South Armorican domain. Strain accumulated along the SASZ in a time-span extending to 300-298 Ma, i.e. contemporaneously with the activity of nearby major extensional shear zones. These results support a new model of crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history (defined as the largest age difference through the section), i.e. the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves with time, with an increasingly large fraction partitioned in the ultramylonitic core.
EGU General Assembly
Vienne, Austria

insu-00839320
https://hal-insu.archives-ouvertes.fr/insu-00839320
BIBCODE : 2010EGUGA..12.9881A

Éditeur(s) : HAL CCSD
Résumé : Thrusting fault zone in foreland basins are characterized by highly foliated zones generally enriched in phyllosilicates which can play a major role on the mechanical behaviour of the fault. In this context, investigations of synkinematic clay minerals permit to determine the origin of the fluid from which they precipitated as well as the mechanisms of deformation. Our study is focused on clay mineral assemblages (illite and chlorite) in a major thrust fault located in the Monte Perdido massif (southern Pyrenees), a shallow thrust that affects upper cretaceous-paleocene platform carbonates and lower Eocene marls and turbidites. It implied 3 km of displacement of the Monte Perdido thrust unit with respect to the underlying Gavarnie unit. In this area the cleavage development by pressure-solution is linked to the Monte Perdido and Gavarnie thrust activity. The core zone of the fault, about 6 m thick, consists of an interval of intensely deformed clay-bearing rocks bounded by major shear surfaces. The deformed sediment is markedly darker than the protolith. Calcite-quartz shear veins along the shear planes are abundant. Detailed SEM and TEM observations of highly deformed fault zone samples indicate that clay mineral enrichment in the core zone of the fault is not only related to passive increase by pressure-solution mechanism but that dissolution-recrystallization of phyllosilicates occurs during deformation. A mineral segregation is observed in the highly deformed zone. Newly formed 2M 1 muscovite is present along the cleavage whereas IIb chlorite crystals fill SV2 shear veins suggesting syntectonic growth of phyllosilicates in the presence of fluids in low-grade metamorphic conditions. These mineralogical reactions act as weakening processes and would favour Monte Perdido fault creeping.
Swiss Journal of Geosciences

hal-00795553
https://hal.archives-ouvertes.fr/hal-00795553
DOI : 10.1007/s00015-012-0098-0

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
In south China the Lushan massif forms a topographic high of the South China Block south of the Qinling-Dabie belt. The Lushan massif consists of two main lithotectonic units separated by a major tectonic contact: a Neoproterozoic (upper Sinian)-Paleozoic unit comprising primarily unmetamorphosed sandstones overlies a Paleoproterozoic unit mainly composed of low-pressure, high-temperature gneisses and micaschists. Both units are cut by Cretaceous granitic intrusions. Three primary tectono-metamorphic and magmatic events are recognized. The eastern part of the Lushan massif is cut by a NNE-SSW trending ductile normal fault (D3 deformation) coeval to the emplacement of a 100-110 Ma leucogranite dated by 40Ar/39Ar laserprobe on biotite and muscovite. D2 deformation is responsible for the formation of a decakilometer-scale NE-SW trending upright anticline characterized by NE-SW stretching and NW-SE shortening. The age of this folding event is defined by a 127±1 (2σ) Ma U/Pb titanite date obtained for a syntectonic granodiorite and 40Ar/39Ar ages of 133 Ma for amphibole. This Cretaceous age also corresponds to the 40Ar/39Ar ages of 126 Ma found on syntectonic muscovites at the base of the Sinian unit. An older deformation event, D1, characterized by a top-to-the-NW extensional decollement of the Sinian-Paleozoic series above Proterozoic metamorphic rocks is related to the Triassic tectonics of the Dabieshan. Lastly, in the lower part of Sinian rocks, the occurrence of kyanite cataclased during D1 documents an older, poorly preserved, late Paleozoic-early Mesozoic tectonometamorphic event (Dx) related to a blind thrust in the continental crust of the South China Block in the southern foreland of the Dabieshan.
ISSN: 0278-7407

insu-00717721
https://hal-insu.archives-ouvertes.fr/insu-00717721
https://hal-insu.archives-ouvertes.fr/insu-00717721/document
https://hal-insu.archives-ouvertes.fr/insu-00717721/file/Lin-Tectonics-2000.pdf
DOI : 10.1029/2000TC900009

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
New petrographic and microstructural observations, mineral equilibria modelling and U/Pb (monazite) geochronological studies were carried out to investigate the relationships between deformation and metamorphism across the Rehamna massif (Moroccan Variscan belt). In this area, typical Barrovian (muscovite to staurolite) zones developed in Cambrian to Carboniferous metasedimentary rocks that are distributed around a dome-like structure. First assemblages are characterized by the presence of locally preserved andalusite, followed by prograde evolution culminating at 6 kbar and 620 °C in the structurally deepest staurolite zone rocks. This Barrovian sequence was subsequently uplifted to supracrustal levels, heterogeneously reworked at greenschist facies conditions, which was followed locally by static growth of andalusite, indicating heating to 2.5–4 kbar and 530–570 °C. The 206Pb/238U monazite age of 298.3 ± 4.1 Ma is interpreted as minimum age of peak metamorphic conditions, whereas the ages of 275.8 ± 1.7 Ma and 277.0 ± 1.1 Ma date decompression and heating at low pressure, in agreement with previous dating of Permian granitoids intruding the Rehamna massif. The prograde metamorphism occurred during thickening and associated horizontal flow in the deeper crust (S1 horizontal schistosity). The horizontally disposed metamorphic zones were subsequently uplifted by a regional scale antiform during ongoing N–S compression. The re-heating of the massif follows late massive E–W shortening, refolding and retrograde shearing of all previous fabrics coevally with regionally important intrusions of Permian granitoids. We argue that metamorphic evolution of the Rehamna massif occurred several hundred kilometres from the convergent plate boundaries in the interior of continental Gondwanan plate. The tectonometamorphic history of the Rehamna massif is put into Palaeozoic plate tectonic perspective and Late Carboniferous reactivation of (Devonian)–Early Carboniferous basins formed during stretching of the north Gondwana margin and formation of the Palaeotethys Ocean. The inherited heat budget of these magma-rich basins plays a role in the preferential location of this intracontinental orogen. It is shown that rapid transition from lithospheric stretching to compression is characterized by specific HT type of Barrovian metamorphism, which markedly differs from similar Barrovian sequences along Palaeozoic plate boundaries reported from Variscan Europe.
ISSN: 0263-4929

hal-01468009
https://hal.archives-ouvertes.fr/hal-01468009
DOI : 10.1111/jmg.12214

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Oisans Massif, located in the external zones of the western Alps, experienced significant shortening during the Alpine collision. While a series of major top-to-the west shear zones was recently described, the general low grade of the metamorphism has not attracted much petrological and geochronological studies. This paper provides combined temperature and age constraints on the evolution of the Oisans Massif. Temperature was estimated with the Raman Spectrometry of Carbonaceous Material (RSCM) method and chlorite geothermometry. Maximum temperature reached by the Mesozoic cover (Tmax) from Grenoble to the Galibier pass (E-W) and from Saint Jean de Maurienne to Embrun (N-S) yielded almost constant ca. 330 °C temperatures all through the Massif. Temperatures however strongly decrease either westward towards the top of the Vercors sedimentary sequence or eastward towards the Penninic Frontal Thrust. Age constraints were retrieved using 40Ar/39Ar in situ analyses performed on variously strained samples from Alpine shear zones. Over strain gradients, incipient Alpine recrystallizations progressively develop at the expense of former Variscan parageneses. A combined textural and EPMA approach permitted to identify newly formed chlorite and phengite that unequivocally grew in response to deformation or to low grade metamorphism. Chlorites recorded temperatures from ca. 350–150 °C during the activity of shear zones. In parallel, 40Ar/39Ar in situ experiments enabled dating deformation using both synkinematic phengites crystallized below the closure temperature of white-micas and former Variscan muscovite whose isotopic system have been, at least partially re-opened. Activity of top-to-the-west shear zones responsible for the shortening and thickening of the Oisans massif thus occurred between 34 and 33 and 25 Ma. Integrating these new age-constraints, Tmax estimates, and published geological data on the Oisans Massif and neighbouring areas allow proposing a new shortening scenario for the external zones. From ca. 34–33 Ma, the Oisans Massif was buried as a rigid block below more internal units and reached a temperature of ca. 330 °C. Shearing progressively localized along a series of top-to-the-W shear zones in the basement until 25 Ma. Deformation then localized along a major thrust at the base of the ECM massif and propagated along the basement-cover interface below the Vercors massif after 16 Ma.
ISSN: 0264-3707

Droits : info:eu-repo/semantics/OpenAccess
insu-01093878
https://hal-insu.archives-ouvertes.fr/insu-01093878
https://hal-insu.archives-ouvertes.fr/insu-01093878/document
https://hal-insu.archives-ouvertes.fr/insu-01093878/file/GEOD1326RA.pdf
DOI : 10.1016/j.jog.2014.09.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Field evidence for syn-deformation migmatization and crystallization along the Karakorum fault contradicts the study of Wang et al. (2012). The ages of such magmatic rocks provide minimum ages for the onset of deformation at similar to 23 Ma in North Ayilari and similar to 19 Ma in Tangtse. The onset of deformation at 12 Ma in the Ayilari range inferred by Wang et al. (2012) from a muscovite Ar/Ar age is a cooling age, thus only a minimum age. The similar to 60 Ma granodiorite bodies, the ophiolitic rocks and the south Kailash thrust that are correlated across the fault to provide a 52 +/- 2 km finite offset do not define reliable piercing points. Such observations as well as our previous work concur to show that the Karakorum fault initiated in the Oligo-Miocene, and has a long-term dextral slip-rate between 7.5 and 13 mm/yr, approximately twice that proposed by Wang et al. (2012).
ISSN: 0012-821X

hal-00829469
https://hal.archives-ouvertes.fr/hal-00829469
DOI : 10.1016/j.epsl.2012.12.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The timing of E–W extension of the Tibetan plateau provides a test of mechanical models of the geodynamic evolution of the India–Asia convergence zone. In this work we focus on the Kung Co half graben (Southern Tibet, China), bounded by an active N–S normal fault with a minimum vertical offset of 1600 m. To estimate the onset of normal faulting we combined high and medium temperature (U–Pb, Ar/Ar) and low temperature ((U–Th)/He) thermochronometry of the Kung Co pluton, a two-mica granite of the northern Himalayan granitic belt that outcrop in the footwall of the fault. Biotite and muscovite Ar/Ar ages , are close from each other [not, vert, similar 16 Ma ± 0.2 (Ms) and not, vert, similar 15 ± 0.4 Ma (Bt)], which is typical of fast cooling. The zircon and apatite (U–Th)/He ages range from 11.3 to 9.6 Ma and 9.9 to 3.7 Ma respectively. These He ages are indicative of (1) fast initial cooling, from 11.3 to not, vert, similar 9 Ma, gradually decreasing with time and (2) a high geothermal gradient (not, vert, similar 400 °C/km), close to the surface at not, vert, similar 10 Ma. The Kung Co pluton was emplaced at about 22 Ma (U–Pb on zircon) at less than 10 km depth and 520–545 °C. Subsequent to its shallow emplacement, the pluton underwent fast thermal re-equilibration ending around 7.5 Ma, followed by a period of slow cooling caused either by the end of the thermal re-equilibration or by very slow exhumation (0.02–0.03 mm/yr) from not, vert, similar 7.5 Ma to at least 4 Ma. In either case the data suggest that the exhumation rate increased after 4 Ma. We infer this increase to be related to the initiation of the Kung Co normal fault. A critical examination of previously published data show that most not, vert, similar N–S Tibetan normal faults may have formed less than 5 Ma ago rather than in the Miocene as assumed by several authors. Such a young age implies that E–W extension is not related to the Neogene South Tibetan magmatism (25 to 8 Ma). Consequently, models relating E–W extension to magmatism, such as convective removal of the lower lithosphere, may be inappropriate. We rather think that this extension is related with local accommodation of boundary forces and displacements.
ISSN: 0012-821X

hal-00311791
https://hal.archives-ouvertes.fr/hal-00311791
DOI : 10.1016/j.epsl.2007.01.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Synkinematic phyllosilicates in fault zones can be used to deduce the deformation mechanisms and the conditions of fault activity, as their chemical composition, crystal structure and texture can record the different stages of deformation and fluid-rock interactions. The Pic de Port Vieux, a second-order thrust related to the major Gavarnie thrust in the southern central part of the Pyrenees Axial Zone, juxtaposes Triassic pelites of the hanging wall and Cretaceous limestones of the footwall. In order to investigate the mineralogical and geochemical changes and constrain the deformation conditions of thrusting, characterization of phyllosilicates was performed along a transect in the fault hanging wall pelites. The Triassic pelites are mainly composed of quartz, calcite, phyllosilicates (chlorite and K-white mica) and ± hematite. The core fault zone thickness is estimated to be about one meter of intensively foliated green pelites, whereas the damage zone is composed of several meters of red pelites. XRD data demonstrated that the difference in color is related to hematite which is only present in the damage zone. Phyllosilicates of the damage zone are mainly inherited/diagenetic K-white mica and chlorite. In the core zone, newly formed chlorite is abundant and preferentially located in veins. It is enriched in Fe compared to the chlorite of the red pelites. The well-defined foliation in the core zone is overlaid by preferentially oriented muscovite grains which have homogeneous compositions, with less Na and relatively more Fe than mica from the red pelites. Newly formed chlorite and muscovite in the core zone are synkinematic to the fault activity. They are both related to deformation processes and fluid rock interactions. Kübler index measurements and chlorite thermometry show that synkinematic phyllosilicates have registered a temperature of 270°C ± 23°C for the damage zone and 285°C ± 28°C for the core zone which are corresponding to lower-anchizone/epizone grade conditions. Numerical modelling with the geochemical modelling program PhreeqC was performed to determine the favorable conditions for the mineralogical change between red and green pelites. It suggests that the main critical parameter favoring hematite dissolution and chlorite precipitation in the core zone, is the redox conditions. According to the model, the chemical changes in the core zone occurred due to interactions with highly reductive fluids. In addition, the hematite dissolution maybe the source of iron for newly formed phyllosilicates in the core zone that are more iron rich compared to those from the red pelites.
ISSN: 0169-1317

hal-01536006
https://hal.archives-ouvertes.fr/hal-01536006
DOI : 10.1016/j.clay.2017.05.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Unusual high-pressure inner thermal aureoles are described from the Minador and Angico Torto epidote-bearing tonalitic plutons that emplaced into green schist-facies metasedimentary rocks of the Neoproterozoic Cachoeirinha-Salgueiro belt, northeastern Brazil. The foliated pelitic hornfelses display the mineral assemblage garnet, kyanite, staurolite, muscovite, biotite, plagioclase +/- quartz. Rare fibrolite is only found very close to the contacts. Hornfelses display steep mineral lineations and steeply-dipping foliations concordant with magmatic contacts. Leucocratic veinlets containing quartz, oligoclase, garnet, kyanite, staurolite, rutile and ilmenite suggest that limited melting conditions were reached very close to magmatic contacts (T >= 650 degrees C, P around 8 kbar). These high-pressure hornfelses form a few meters thick, rigid envelopes around the two plutons. Contrary to known examples of kyanite-bearing hornfelses that recorded high-temperature decompression, the nearly isobaric cooling down to ca. 450 degrees C is constrained by 3.20-3.30 Si contents of retrogressive phengites from both inner hornfelses and ductilely-deformed tonalite at the pluton margins. Isograds and bathograds are, therefore, apparently telescoped due to HP/LT shearing, possibly caused by subsequent differential vertical movements affecting these two solidified plutons. The unusual depth of emplacement of these syn-kinematic calc-alkaline plutons is explained by a tentative geodynamic model involving a pre-620 Ma-subduction setting.
ISSN: 0895-9811

hal-00424503
https://hal.archives-ouvertes.fr/hal-00424503
DOI : 10.1016/j.jsames.2008.09.005

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : This study focuses on the petrology, geochronology and thermochronology of metamorphic rocks within the northern Menderes Massif in western Turkey. Metasediments belonging to the cover series of the Massif record pervasive amphibolite-facies metamorphism culminating at ca. 625–670 °C and 7–9 kbars. U–Th–Pb in situ ages on monazite and allanite from these metapelites record crustal thickening and nappe stacking associated with the internal imbrication of the Anatolide–Taurides platform during the Eocene. In addition, new 39Ar/40Ar single muscovite grain analyses on deformed rocks were performed in three localities within the northern Menderes Massif and ages range from 19.8 to 25.5 Ma. These mylonites may be related to both well-known detachments, Simav to the north and Alaşehir to the south, which accommodate Oligo–Miocene exhumation of the Menderes core complex. U–Th–Pb data on monazite grains (22.2 ± 0.2 Ma) from migmatites emplaced within the Simav detachment confirm these ages.
ISSN: 1437-3254

hal-01355967
https://hal.archives-ouvertes.fr/hal-01355967
DOI : 10.1007/s00531-015-1271-2

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Investigation of an eclogite xenolith, discovered in a Cretaceous granite from the Central Domain of the Dabieshan massif in eastern China, yields new petrological insights into the high to ultrahigh-pressure metamorphism, experienced by the Qinling-Dabie orogen. Prior to inclusion as a xenolith in the granite during the Early Cretaceous, this eclogite xenolith had recorded a complex metamorphic evolution that complies with subduction and exhumation processes experienced by the continental crust of the South China Block. Well-preserved mineral parageneses substantiate the prograde and retrograde stages revealed by inclusions in porphyroblastic garnet and zoned minerals such as garnet, comphacite and amphibole in the matrix. The relatively low P/T re-equilibration during a latemetamorphic stage was textually inferred by the presence of aluminous and calcic-subcalcic amphiboles such as katophorite, edenite, taramite and pargasite as main matrix phases. According to our U/Pb, Rb/Sr and new 40Ar/39Ar geochronological results, namely 109 ± 1 and 112 ± 2 Ma plateau ages for muscovite and amphiboles, respectively, two successive but distinct cooling stages account for the thermal history of the granite–migmatite gneiss dome that forms the Central Dabieshan Domain. We argue that prior to the Cretaceous doming, the Central Dabieshan Domain experienced a tectono-metamorphic evolution similar to that observed in the high-pressure to ultra high-pressure units developed in the Southern Dabieshan Domain and Hong'an massif.
ISSN: 1437-3254

hal-00104224
https://hal-insu.archives-ouvertes.fr/hal-00104224
https://hal-insu.archives-ouvertes.fr/hal-00104224/document
https://hal-insu.archives-ouvertes.fr/hal-00104224/file/Lin-IntJEarthSciences-2007.pdf
DOI : 10.1007/s00531-006-0129-z

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Heletz sandstone (Israel) reactivity is studied by means of CO2-rich brine percolation experiments and modeling. Experiments are performed at in situ temperature and pressure conditions with two distinctly different injection flow rates and for two different brine compositions: the genuine Heletz brine and a similar brine but in equilibrium with gypsum. The Heletz sandstone is composed of quartz, dolomite, ankerite, K-feldspar, clay minerals and minor amounts of gypsum and pyrite. The main reaction is the dissolution of the carbonates which is fastest for the highest flow rate injection and for the genuine Heletz brine. Permeability increases during the five percolation experiments, regardless of flow rate and brine type. This increase in permeability is associated to a decrease in porosity during the gypsum-equilibrated brine experiments due to gypsum precipitation. The precipitation of secondary minerals (kaolinite, muscovite and smectite) is mainly controlled by the dissolution of K-feldspar and largest at low flow rate injection, indicating that these precipitation processes are diffusion-controlled and localized in immobile zones where favorable chemical micro-environments exist. These processes are quantified by means of a reactive transport model. These results indicated that the CO2 injection at the Heletz site should trigger both permeability increase in interface between brine and CO2, which may extend over a large extension and where mixing processes are very active, especially near the well under intermittent injection conditions.
ISSN: 1750-5836

hal-01356329
https://hal.archives-ouvertes.fr/hal-01356329
DOI : 10.1016/j.ijggc.2015.10.023