Éditeur(s) : HAL CCSD
Résumé : International audience
Fish is a rich source of essential nutrients for fetal development, but in contrast, it is also a well-known route of exposure to environmental pollutants. We assessed whether fish intake during pregnancy is associated with fetal growth and the length of gestation in a panel of European birth cohort studies. The study sample of 151,880 mother-child pairs was derived from 19 population-based European birth cohort studies. Individual data from cohorts were pooled and harmonized. Adjusted cohort-specific effect estimates were combined by using a random- and fixed-effects meta-analysis. Women who ate fish >1 time/wk during pregnancy had lower risk of preterm birth than did women who rarely ate fish (≤ 1 time/wk); the adjusted RR of fish intake >1 but <3 times/wk was 0.87 (95% CI: 0.82, 0.92), and for intake ≥ 3 times/wk, the adjusted RR was 0.89 (95% CI: 0.84, 0.96). Women with a higher intake of fish during pregnancy gave birth to neonates with a higher birth weight by 8.9 g (95% CI: 3.3, 14.6 g) for >1 but <3 times/wk and 15.2 g (95% CI: 8.9, 21.5 g) for ≥ 3 times/wk independent of gestational age. The association was greater in smokers and in overweight or obese women. Findings were consistent across cohorts. This large, international study indicates that moderate fish intake during pregnancy is associated with lower risk of preterm birth and a small but significant increase in birth weight.
The American Journal of Clinical Nutrition

hal-01118513
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01118513
PUBMED : 24335057
DOI : 10.3945/ajcn.113.067421

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Production rates in horizontal shale gas wells display declines that are controlled by the low permeability and the intrinsic heterogeneity of the shale matrix. We present an original multi-continuum approach that yields a physical model able to reproduce the complexity of the decreasing gas rates. The model describes the dynamics of gas rate as function of the physical reservoir parameters and geometry, while the shale matrix heterogeneity is accounted for by a stochastic description of transmissivity field. From the 3D (Dimensional) problem setting, including the heterogeneous shale matrix, the fractures generated by the hydrofracking operations, as well as the production well characteristics, we establish an effective upscaled 1D model for the gas pressures in fracture and matrix as well as the volumetric flux. We analyse the decline curves behaviour, and we identify the time scales that characterize the dynamics of the gas rate decline using explicit analytical Laplace space solutions of the upscaled process model. Asymptotically, the flux curves decrease exponentially, while in an intermediate regime we find a power-law behaviour, in which the flux scales with a power law in time as (t^{-beta }), where (beta ) reflects the medium heterogeneity. We use this solution to fit a set of real data displaying distinctly different decline trends and study the sensitivity of the model to the reservoir parameters in order to identify their respective controls at the different stages of the decline curve dynamics. Results indicate that the initial value of the gas rate is determined by the transmissivity of the fractures and the initial pressure of the gas in the shale matrix. The latter causes mainly a shift in the entire decline curve. The early time of decline curve shape is primarily controlled by the fracture properties (compressibility and transmissivity). During the main part of the economically valuable production times, i.e. before the production rate drops exponentially, the decline curve is strongly controlled by the properties of the shale rocks including their heterogeneity, which is modelled by two parameters describing the non-Fickian pressure diffusion effects in a stochastic framework.
ISSN: 0169-3913

hal-01217247
https://hal.archives-ouvertes.fr/hal-01217247
DOI : 10.1007/s11242-015-0504-y

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Heletz sandstone (Israel) reactivity is studied by means of CO2-rich brine percolation experiments and modeling. Experiments are performed at in situ temperature and pressure conditions with two distinctly different injection flow rates and for two different brine compositions: the genuine Heletz brine and a similar brine but in equilibrium with gypsum. The Heletz sandstone is composed of quartz, dolomite, ankerite, K-feldspar, clay minerals and minor amounts of gypsum and pyrite. The main reaction is the dissolution of the carbonates which is fastest for the highest flow rate injection and for the genuine Heletz brine. Permeability increases during the five percolation experiments, regardless of flow rate and brine type. This increase in permeability is associated to a decrease in porosity during the gypsum-equilibrated brine experiments due to gypsum precipitation. The precipitation of secondary minerals (kaolinite, muscovite and smectite) is mainly controlled by the dissolution of K-feldspar and largest at low flow rate injection, indicating that these precipitation processes are diffusion-controlled and localized in immobile zones where favorable chemical micro-environments exist. These processes are quantified by means of a reactive transport model. These results indicated that the CO2 injection at the Heletz site should trigger both permeability increase in interface between brine and CO2, which may extend over a large extension and where mixing processes are very active, especially near the well under intermittent injection conditions.
ISSN: 1750-5836

hal-01356329
https://hal.archives-ouvertes.fr/hal-01356329
DOI : 10.1016/j.ijggc.2015.10.023

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A shallow field experimental site for CO2 injection was established at Maguelone (Languedoc, France), in order to test in an integrated manner a suite of surface and downhole hydrogeophysical monitoring methods. The objective is to improve monitoring of gas transport in the shallow subsurface and to determine the sensitivity of CO2 monitoring systems for leakage detection. The site offers a natural laboratory to study the processes associated with CO2 injection in a clastic and clay-rich context saturated with saline fluids. Prior to CO2 injection, three nitrogen (N2) injections were undertaken in 2012 to measure the site response to neutral gas injection. In 2013, a volume of 111 m3 (mass of 220 kg) of CO2 was injected during 3.5 h at 15 m depth. During each experiment, the gas plumes were successfully detected from pressure monitoring, time-lapse induction logging and downhole resistivity monitoring with dipole–dipole array. Increases in resistivity are attributed to free gas propagation (either N2 or CO2) whereas decreases in resistivity correlate with CO2 dissolution in the pore fluid. Chemical analyses confirm this hypothesis with a decrease in pH and an increase in the concentration of dissolved species in the latter case.
ISSN: 1750-5836

hal-01355943
https://hal.archives-ouvertes.fr/hal-01355943
DOI : 10.1016/j.ijggc.2015.12.005

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
This paper presents a multicontinuum approach to model fractal temporal scaling of catchment response in hydrological systems. The temporal scaling of discharge is quantified in frequency domain by the transfer function HðxÞ, which is defined as the ratio between the spectra of catchment response and recharge time series. The transfer function may scale with frequency x as HðxÞ x2b. While the classical linear and Dupuit models predict exponents of b52 and b51, observations indicate scalings with noninteger exponents b. Such behaviors have been described by multifractal models, which, however, often lack a relation to the medium characteristics. We revisit and extend the classical linear Dupuit aquifer models and discuss their physical meanings in the light of the resulting aquifer dynamics. On the basis of these classical models, we derive a multicontinuum approach that provides physical recharge models which are able to explain fractal behaviors with exponents 1=2 < b < 2. Furthermore, this approach allows to link the fractal dynamics of the discharge process to the physical aquifer characteristics as reflected in the distribution of storage time scales. We systematically analyze the catchment responses in the proposed multicontinuum models, and identify and quantify the time scales which characterize the dynamics of the catchment response to recharge.
ISSN: 0043-1397

insu-00952537
https://hal-insu.archives-ouvertes.fr/insu-00952537
https://hal-insu.archives-ouvertes.fr/insu-00952537/document
https://hal-insu.archives-ouvertes.fr/insu-00952537/file/russian.pdf
DOI : 10.1002/2013WR014255

Éditeur(s) : HAL CCSD Elsevier
Résumé : The correct characterization of the effective reactive transport dynamics is an important issue for modeling reactive transport on the Darcy scale, specifically in situations in which reactions are localized, that is when different reactions occur in different portions of the porous medium. Under such conditions the conventional approach of homogenizing only the porous medium chemistry is not appropriate. We consider here reactive transport in a porous medium that is characterized by mass transfer between a mobile and a distribution of immobile regions. Chemical and physical heterogeneities are reflected by distributions of kinetic reaction rate constants and residence times in the immobile zones. We derive an effective reactive transport equation for the mobile solute that is characterized by non-local physical mass transfer and reaction terms. Specifically, chemical heterogeneity is upscaled in terms of a reactive memory function that integrates both chemical and physical heterogeneity. Mass transfer limitations due to physical heterogeneity yield effective kinetic rate coefficients that can be much smaller than the volumetric average of the local scale coefficients. These results help to explain and quantify the often reported discrepancy between observed field reaction rate constants and the ones obtained under well mixed laboratory conditions. Furthermore, these results indicate that transport under physical and chemical heterogeneity cannot be upscaled separately.
ISSN: 0169-7722

hal-00617674
https://hal.archives-ouvertes.fr/hal-00617674
DOI : 10.1016/j.jconhyd.2010.06.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We study diffusion in a heterogeneous medium that is characterized by spatially varying diffusion properties from a random walk point of view. We show that an inhomogeneous continuous time random walk (CTRW) with a spatially variable exponential transition time distribution solves the spatially discretized heterogeneous diffusion equation. This demonstrates the equivalence of the widely used time-domain random walk (TDRW) scheme and spatially inhomogeneous CTRW and at the same time provides a demonstration of the formal equivalence of the TDRW particle formulation and the heterogeneous diffusion equation. Based on this equivalence, we develop a TDRW method for heterogeneous diffusion under spatially variable multirate mass transfer properties. We discuss the implementation of these schemes and study the diffusion behavior in the presence of traps that are characterized by a truncated power-law trapping time distribution.
ISSN: 0309-1708

hal-00767566
https://hal.archives-ouvertes.fr/hal-00767566
DOI : 10.1016/j.advwatres.2012.07.015

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We derive a general formulation of the time domain random walk (TDRW) approach to model the hydrodynamic transport of inert solutes in complex geometries and heterogeneous media. We demonstrate its formal equivalence with the discretized advection-dispersion equation and show that the TDRW is equivalent to a continuous time random walk (CTRW) characterized by space-dependent transition times and transition probabilities. The transition times are exponentially distributed. We discuss the implementation of different concentration boundary conditions and initial conditions as well as the occurrence of numerical dispersion. Furthermore, we propose an extension of the TDRW scheme to account for mobile-immobile multirate mass transfer. Finally, the proposed TDRW scheme is validated by comparison to analytical solutions for spatially homogeneous and heterogeneous transport scenarios.
ISSN: 0043-1397

hal-01356319
https://hal.archives-ouvertes.fr/hal-01356319
DOI : 10.1002/2015WR018511

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The main goal of the monitoring stage of Carbon Capture and Storage (CCS) is to obtain an accurate estimation of the subsurface CO2 accumulation and to detect any possible leakage. Laboratory experiments are necessary to investigate the small scale processes governing the CO2–brine–rock interaction. They also provide a means to calibrate the results coming from field scale geophysical methods. In this work we set up an experimental system which is able to perform Electrical Resistivity Tomography (ERT) measurements on centimeter-scale rock samples at various P–T conditions. We present the results of two new experiments related to CO2 monitoring, performed on a cylindrical (4 × 8 cm) Fontainebleau rock sample. In the first one, we have quantified the CO2 saturation at different volume fractions, representing zones from a deep saline aquifer with varying degrees of saturation. In the second one, we have monitored and quantified the effect of CO2 dissolution in the brine at a pressure of 40 bar during eight days, emulating the invasion of CO2 into a shallow aquifer. Results highlight the importance of accounting for the contribution of surface conductivity in highly CO2-saturated regions, even in clay-free rocks, and also for brine conductivity variation due to CO2 dissolution. Ignoring any of these effects will end up in a CO2 saturation underestimation. We present a modified CO2 saturation equation to account for these two influences.
ISSN: 0926-9851

hal-01356323
https://hal.archives-ouvertes.fr/hal-01356323
DOI : 10.1016/j.jappgeo.2016.03.039

Éditeur(s) : HAL CCSD Elsevier
Résumé : We investigate experimentally the alteration of fractured class-G cement flowed by CO2-rich brine. The experiment mimics a mechanically damaged rough-walled fractured cement annulus at temperature 60 °C and pressure 10 MPa. The experiment consists of flowing a reservoir-equilibrated brine mixed with CO2 (partial pressure of 2.3 MPa) through the fracture of average aperture 14 μm at constant flow rate (100 μL min−1). This flow rate corresponds to pressure gradient representative of an average in situ hydrodynamic condition. Results indicate an intense alteration of the cement with a large removal of mass at the scale of the sample. However, the fracture alteration patterns are triggered by the initial heterogeneity of the fracture aperture; the aperture of the low aperture zones tends to decrease due to calcite precipitation whereas preferential paths develop in the zones of higher aperture associated. Nevertheless, the expected large permeability increase triggered by the mass removal is mitigated by the precipitation of a low density Si-rich amorphous material. The alteration rate will decrease with time because of the increasing distance of diffusion between the fracture where the reactants are actively renewed by advection and the portlandite and C-S-H dissolution fronts. The different zones of reaction can be adequately modeled by a simple 1D diffusion-reaction model using published kinetics coefficients and extrapolation to larger times than the experiment time can be drawn. Altogether, and in addition to the previous studies of the alteration of fractured well cement annulus, this study shows that the leakage potential is strongly controlled by the initial distribution of the aperture along the fracture: low aperture zones will tend to self-heal while localized flow in connected high aperture paths will be perennial.
ISSN: 1750-5836

hal-01346006
https://hal.archives-ouvertes.fr/hal-01346006
DOI : 10.1016/j.ijggc.2016.01.032