Éditeur(s) : HAL CCSD
Résumé : Geological storage of CO2 is one of diverse technologies being explored to reduce atmospheric carbon fromindustrial processes (i.e. fossil fuel combustion). One of the specific features of CO2 injection is the possibility ofgeochemical reactions (dissolution – precipitation) between mobile reactive brine (e.g. formation water enrichedin CO2) and the host rock during the spatial and temporal evolution of CO2. That leads to modifications in thepore structure, which in turn change the flow dynamics of the reservoir (e.g. the permeability k). Then, thesesstructural modifications can largely control the injectivity, so that the pressure field in the reservoir and also theCO2 propagation. Accordingly, it is crucial to explore the changes in the reservoir properties (e.g. structural andhydrodynamic) induced during a CO2 injection and specially the relationships between them (e.g. k or reactivesurface-Sr versus porosity-φ , k versus rock heterogeneity), for developing predictive modelling tools of thetransport and reaction processes occurring during a CO2 injection and reliable risk assessment. In the case ofcarbonate rocks, the application of the predictive models of transport and reaction is still challenging, because oftheir high heterogeneity so that the incertitude in the reaction kinetics of carbonate minerals.From this perspective, we realized brine-enriched in CO2 percolation experiments through carbonate rocksamples in thermodynamic conditions expected during CO2 injection in deep reservoirs (T = 100°C et P =12MPa). The permeability changes k(t) is monitored during the experiments and the porosity variationφ (t) iscalculated from chemical analyses of the sampled outlet fluids, using ICP-EAS. The pore structure modificationsare investigated from high resolution X ray micro tomography images acquired from the synchrotron ofGrenoble (ESRF). Depending to the dissolution regime, controlled by the reservoir rock fabric and the chemicalcomposition of the brine (e.g. PCO2), we observed that a modification of pore structure can either improve(atypical result in dissolution context) or impair the value of the permeability k.
Le stockage géologique du CO2 est l’une des diverses technologies étant explorées afin deréduire les émissions de carbone atmosphérique des processus industriels (i.e. combustion del’énergie fossile). L’une des spécifiques caractéristiques de l’injection du CO2 en profondeurreste la possibilité de réactions géochimiques (dissolution-précipitation) entre la saumureréactive mobile (e.g. eau de formation enrichie en CO2) et la roche encaissante durantl’évolution spatiale et temporelle du CO2, conduisant à des modifications dans la structure despores et par conséquent dans les propriétés d’écoulement du réservoir (e.g. la perméabilité k).Donc, ces changements structuraux peuvent largement contrôler l’injectivité, ainsi que lechamp de pression dans le réservoir et aussi la propagation du CO2. Il demeure ainsi cruciald’explorer les changement dans les propriétés de réservoirs (e.g. structurales ethydrodynamiques) induits durant une injection de CO2 et explicitement les relations existantesentre eux (e.g. k ou surface réactive-Sr versus porosité-φ , k versus hétérogénéité de la roche),afin de développer des outils de modélisation prédictive des processus de transport etréactionnels se produisant durant une injection de CO2 et d’évaluer de façon fiable les risques.Dans le cas des réservoirs carbonatés, l’application des modèles prédictifs de transport réactifdemeure toujours un enjeu, car contrainte par la forte hétérogénéité en leur sein ainsi que parl’incertitude dans la cinétique de réactions des minéraux carbonatés dans ce contexte. Danscette optique, nous avons réalisé des expériences de percolation à travers des échantillons deroches carbonatées dans les conditions thermodynamiques de stockage en profondeur (T =100°C et P =12 MPa). L’évolution de la perméabilité k(t) est suivie au cours desexpériences ; et la variation de la porosité φ (t) est calculée à partir des résultats d’analyseschimiques au ICP-AES des fluides de sortie échantillonnés. L’investigation des modificationsapportées à la structure des pores est réalisée par le biais de la Micro-Tomographie hauterésolution à rayon X, acquise au synchrotron de Grenoble (e.g. ESRF).Dépendant du régime de dissolution, contrôlé par la fabrique de la roche réservoir et lacomposition chimique de la saumuré chargée en CO2 (e.g. PCO2 engagée), on a observéqu’une modification de la structure de la roche peut soit améliorer soit détériorer (résultatatypique en contexte de dissolution) la valeur de la perméabilité k.
https://hal.archives-ouvertes.fr/tel-01142136

tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136/document
https://hal.archives-ouvertes.fr/tel-01142136/file/thesemangane2013.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A shallow field experimental site for CO2 injection was established at Maguelone (Languedoc, France), in order to test in an integrated manner a suite of surface and downhole hydrogeophysical monitoring methods. The objective is to improve monitoring of gas transport in the shallow subsurface and to determine the sensitivity of CO2 monitoring systems for leakage detection. The site offers a natural laboratory to study the processes associated with CO2 injection in a clastic and clay-rich context saturated with saline fluids. Prior to CO2 injection, three nitrogen (N2) injections were undertaken in 2012 to measure the site response to neutral gas injection. In 2013, a volume of 111 m3 (mass of 220 kg) of CO2 was injected during 3.5 h at 15 m depth. During each experiment, the gas plumes were successfully detected from pressure monitoring, time-lapse induction logging and downhole resistivity monitoring with dipole–dipole array. Increases in resistivity are attributed to free gas propagation (either N2 or CO2) whereas decreases in resistivity correlate with CO2 dissolution in the pore fluid. Chemical analyses confirm this hypothesis with a decrease in pH and an increase in the concentration of dissolved species in the latter case.
ISSN: 1750-5836

hal-01355943
https://hal.archives-ouvertes.fr/hal-01355943
DOI : 10.1016/j.ijggc.2015.12.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The main goal of the monitoring stage of Carbon Capture and Storage (CCS) is to obtain an accurate estimation of the subsurface CO2 accumulation and to detect any possible leakage. Laboratory experiments are necessary to investigate the small scale processes governing the CO2–brine–rock interaction. They also provide a means to calibrate the results coming from field scale geophysical methods. In this work we set up an experimental system which is able to perform Electrical Resistivity Tomography (ERT) measurements on centimeter-scale rock samples at various P–T conditions. We present the results of two new experiments related to CO2 monitoring, performed on a cylindrical (4 × 8 cm) Fontainebleau rock sample. In the first one, we have quantified the CO2 saturation at different volume fractions, representing zones from a deep saline aquifer with varying degrees of saturation. In the second one, we have monitored and quantified the effect of CO2 dissolution in the brine at a pressure of 40 bar during eight days, emulating the invasion of CO2 into a shallow aquifer. Results highlight the importance of accounting for the contribution of surface conductivity in highly CO2-saturated regions, even in clay-free rocks, and also for brine conductivity variation due to CO2 dissolution. Ignoring any of these effects will end up in a CO2 saturation underestimation. We present a modified CO2 saturation equation to account for these two influences.
ISSN: 0926-9851

hal-01356323
https://hal.archives-ouvertes.fr/hal-01356323
DOI : 10.1016/j.jappgeo.2016.03.039

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We describe an experimental system including monitoring of temperature, pressure, pH, oxidation reduction potential and optical density at 600 nm, designed for studying the role of microorganisms on the geological sequestration Of CO2 and its transformation into solid carbonate phases. Measurements were performed in an artificial ground water (AGW) supplemented with urea (2 g.l(-1)) and equilibrated at controlled temperatures with a gaseous phase before bacterial inoculation. We used the ureolytic strain Bacillus pasteurii as a model carbonate precipitating bacteria and showed that it can successfully promote strong pH increases by ureolysis in the AGW equilibrated with CO2 pressures of up to I bar. Increasing salinities (5.8,13.5 and 35.0 g.l(-1)) have a positive effect on the rate of pH increase, whereas the effect of increasing temperatures (30,35 and 38 degrees C) is less important. Calcium is also shown to have a specific positive influence on the rate of ureolysis. The number of viable cells present in solution decreases greatly during the carbonate precipitation event but the population partially recovers once precipitation is over.
ISSN: 0009-2541

hal-00445282
https://hal.archives-ouvertes.fr/hal-00445282
DOI : 10.1016/j.chemgeo.2008.12.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To evaluate the performance of downhole and surface geophysical monitoring methods, a series of shallow gas injection-monitoring experiments has been performed in a coastal saline aquifer at Maguelone, France. The recorded data include pressure measurements with a Westbay multilevel completion and CO2 saturation at an observation well derived from electrical resistivity with a modified Waxman-Smits (MWS) model. In this work, the aim is to develop a simulation model capturing the gas transport behavior and consistent with field data. For this purpose, the simulation of the CO2 injection experiment is carried out with two conceptual models, a homogeneous model and a heterogeneous model treated with multiple realization Monte Carlo simulations. Numerical simulator TOUGH2 with the equation of state module EOS7C is used for the simulations. Comparison of the model results with field data suggests that the pressure responses are captured with relatively good accuracy. Similarly, the model also provides an overall reasonable agreement and correct order of magnitude for predicted gas saturation values. However, as the heterogeneity pattern in the field data remains largely unknown, the model predictions can only be used to capture the mean behavior as well as to provide insights into how heterogeneity can influence the system behavior, by means of sensitivity analyses of the influence of heterogeneities on individual realizations.
ISSN: 1750-5836

hal-01467240
https://hal.archives-ouvertes.fr/hal-01467240
DOI : 10.1016/j.ijggc.2016.09.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : Adequate hydrogeophysical monitoring of CO2 geological storage remains a challenge as different parameters might be modified during storage. That implies to compare real-time measurements to an adequate baseline. At the Maguelone shallow experimental site a representative baseline for electrical resistivity was built from a large number of downhole geophysical measurements. At this coastal site this issue is particularly important due to the production of biogenic gas from the subsurface sediments. For this, a modified petrophysical model based on the Waxman-Smits model is proposed to estimate gas saturation found to vary from 2 to 7% within shallow sand layers.
ISSN: 1876-6102

hal-01412685
https://hal.archives-ouvertes.fr/hal-01412685
https://hal.archives-ouvertes.fr/hal-01412685/document
https://hal.archives-ouvertes.fr/hal-01412685/file/pezard2015.pdf
DOI : 10.1016/j.egypro.2015.07.910

Éditeur(s) : HAL CCSD American Chemical Society
Résumé : Experiments were conducted to assess the potential impact of fractured well-cement degradation on leakage rate. Permeability was monitored while CO2-enriched reservoir-equilibrated brine was flowed at constant rate through a single fracture in a class G cement core under conditions mimicking geologic sequestration environments (temperature 60 °C, pressure 10 MPa). The results demonstrate that, at least for the conditions used in the experiment, an initial leakage in a 42 μm aperture fracture (permeability = 1.5 × 10-10 m2) can be self-mitigated due to the decrease of the fracture hydraulic aperture after about 15 h. This decrease results from the development of continuous highly hydrated amorphous Si-rich alteration products at the edge of the fracture and the dense carbonation of the bulk cement that mitigate the penetration of the alteration front.
ISSN: 0013-936X

hal-00950088
https://hal.archives-ouvertes.fr/hal-00950088
DOI : 10.1021/es401317c