Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The nucleation and growth processes of spherulitic alkali feldspar have been investigated in this study through X-ray microtomography and electron backscatter diffraction (EBSD) data. Here we present the first data on Shape Preferred Orientation (SPO) and Crystal Preferred Orientation (CPO) of alkali feldspar within spherulites. The analysis of synchrotron X-ray microtomography and EBSD datasets allowed us to study the morphometric characteristics of spherulites in trachytic melts in quantitative fashion, highlighting the three-dimensional shape, preferred orientation, branching of lamellae and crystal twinning, providing insights about the nucleation mechanism involved in the crystallization of the spherulites. The nucleation starts with a heterogeneous nucleus (pre-existing crystal or bubble) and subsequently it evolves forming “bow tie” morphologies, reaching radially spherulitic shapes in few hours. Since each lamella within spherulite is also twinned, these synthetic spherulites cannot be considered as single nuclei but crystal aggregates originated by heterogeneous nucleation. A twin boundary may have a lower energy than general crystal–crystal boundaries and many of the twinned grains show evidence of strong local bending which, combined with twin plane, creates local sites for heterogeneous nucleation.This study shows that the growth rates of the lamellae (10− 6–10− 7 cm/s) in spherulites are either similar or slightly higher than that for single crystals by up to one order of magnitude. Furthermore, the highest volumetric growth rates (10− 11–10− 12 cm3/s) show that the alkali feldspar within spherulites can grow fast reaching a volumetric size of ~ 10 μm3 in 1 s.
ISSN: 0024-4937

hal-01172356
https://hal.archives-ouvertes.fr/hal-01172356
DOI : 10.1016/j.lithos.2014.12.003

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : A differential effective medium (DEM) model is used to predict elastic properties for a set of porous and anisotropic aggregates, comprised of mixtures of calcite and muscovite. The DEM takes into consideration an anisotropic background medium with triclinic or higher symmetry, in which inclusions of idealized ellipsoidal shape are added incrementally. In general, the calculated elastic properties of a solid that contains inclusions representing "dry" pores/cracks are strongly dependent on the orientation and aspect ratio of the inclusions. Aspect ratios of inclusions in the synthetic aggregates, which consist of air-filled pores, are estimated from anisotropy of magnetic susceptibility (AMS) of samples whose pore space has been impregnated with a colloidal ferrofluid. The AMS derived pore shape geometry is used as an input value for inclusions in the DEM. Modeling results are compared with laboratory determined elastic properties, measured with ultrasonic waves. Calculated shear wave velocities agree in general well with laboratory measured S wave velocities, whereas calculated P wave velocities are typically 0.5-1.1 km/s higher than measured values. Differences between calculated and measured P wave velocities are attributed mainly to incomplete and biased ferrofluid saturation of pores. Spherical pores are preferably filled during imbibition, in comparison to thin cracks, which leads to overprediction of the calculated P wave velocities. The amount of ferrofluid that fills the pore space is dependent on the ratio of calcite to muscovite and the load used for compaction during sample synthesis. The permeability decreases with increasing muscovite content and increasing compaction load. Incomplete saturation of samples with high-muscovite content is confirmed by X-ray microtomography density contrast imaging of dry and ferrofluid saturated specimens.
ISSN: 0148-0227

hal-00617717
https://hal.archives-ouvertes.fr/hal-00617717
DOI : 10.1029/2010JB007750

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Results are reported for an acidic water flow-through experiment conducted in a fractured argillaceous limestone sample (73% carbonates). The change in fracture geometry and related parameters is reported for six data sets obtained from synchrotron X-ray microtomography experiments. High-resolution three-dimensional images of the sample allowed quantification of the changes in fracture morphology at a spatial resolution of 6 ;μm. Mineral mass loss and permeability changes in the sample were also determined. Several physico-chemical phenomena were identified during the experiment. Initial smooth fracture surfaces evolved rapidly toward rough surfaces with uneven clay coverage due to the preferential dissolution of carbonate minerals compared to clay minerals whose dissolution rate is about 106 slower. A microporous clay coating progressively developed at the fluid-rock interface during heterogeneous dissolution of the fracture, while the global dissolution rate of the fracture walls exponentially decreased. The increase in surface roughness and the presumed reorganization of clays caused a progressive reduction in permeability. During the last flow-through stage, a large decrease in sample permeability was attributed to the large removal of clay particles; this process was responsible for a dramatic collapse of the fracture walls near the sample inlet and led to the development of preferential flow pathways. The development of the clay coating also acted as a barrier to flow and mass transfer between calcite grains and bulk solution and affected transport processes within the fracture
ISSN: 0043-1397

hal-00405333
https://hal.archives-ouvertes.fr/hal-00405333
DOI : 10.1029/2006WR005379

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
It is well known that sedimentary rocks having same porosity can have very different pore size distribution. The pore distribution determines many characteristics of the rock, among which its transport properties are often the most useful. Multifractal analysis is a powerful tool that is increasingly used to characterize the pore space. In this study, we performed multifractal analysis of pore distribution on simulated sedimentary rocks using the relaxed bidisperse ballistic deposition model (RBBDM). The RBBDM can generate a 3-D structure of sedimentary rocks of variable porosity by tuning the fraction p of particles of two different sizes. We also performed multifractal analysis on two samples of real sedimentary rock to compare with the simulation studies. One sample, an oolitic limestone is of high porosity (40 per cent) while the other is a reefal carbonate of low porosity, around 7 per cent. 2-D sections of X-ray microtomographs of the real rocks were stacked sequentially to reconstruct the real rock specimens. Both samples show multifractal character. The results from analysis of real rock agree quite well with the simulated structure of low porosity. The simulated rock of high porosity showed a weak multifractal nature though the real rock sample of similar porosity was found to be strongly multifractal. We propose a ‘structure parameter’ ξ which is a function of porosity and the generalized dimensions, and controls the transport properties of the rock.
ISSN: 0956-540X

hal-01174142
https://hal.archives-ouvertes.fr/hal-01174142
DOI : 10.1093/gji/ggu417

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A CO2-rich brine core-flood experiment in calcite limestone for conditions representative of underground storage (P = 12 MPa and T = 100°C) was performed in order to explore the dissolution mechanisms arising at moderate CO2 partial pressure (0.3 MPa). An increase of the total porosity (φT) accompanied by a persistent permeability (k) decrease was measured. The mechanisms controlling this atypical anticorrelated k − φT relationship were investigated from the analysis of high-resolution X-ray microtomography images of the sample acquired before and after the experiment. All the evidences converge to the conclusion that the ubiquitous decrease of permeability measured during the 44 h of dissolution is due to the clogging of a fraction of the macroporosity by microporous material triggered by the rearrangement of the detached undissolved particles. This mechanism results in the development of low permeability zones bridging the macroporosity.
ISSN: 0094-8276

hal-00903585
https://hal.archives-ouvertes.fr/hal-00903585
DOI : 10.1002/grl.50595

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
The dissolution of carbonate rocks usually leads to both porosity (ϕ) and permeability (k) increase. We present experimental evidences and physical-based models of positive and anti-correlated dynamics of k and ϕ observed during dissolution experiments of carbonate rocks. We study the way the rate of change of ϕ and k is controlled by the degree of undersaturation of the percolating solution for two different types of carbonate rocks. We document the occurrence of an anti-correlated k−ϕ trend when the flowing fluid (deionized water) has a weak capacity of dissolution. A positive correlation is found when CO2 is added to the deionized water to increase the potential dissolution rate. Detailed analyses of the microstructures of the rock performed by X-ray microtomography reveal that low dissolution rate favors detachment of solid particles and their subsequent accumulation at the pore-throat inlet. Particles are detached from the rock matrix due to the differential dissolution rate of the indurated grains and the microporous cement. We then propose a simple phenomenological model to interpret the effect of the pore-throat clogging by the accumulation of partially dissolved carbonate particles. We conjecture that permeability is controlled by the decrease of the effective hydraulic radius and the increase of the tortuosity due to partial and localized obstruction of the pore network. Conversely, increasing the level of undersaturation of the flowing solution leads to an augmented potential of dissolving most of the transported particles before they reach the throats. In this case, both k and ϕ increase and display power-law correlations.
ISSN: 0169-3913

hal-01174145
https://hal.archives-ouvertes.fr/hal-01174145
DOI : 10.1007/s11242-015-0456-2

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : In reservoir engineering, hydrodynamic properties can be estimated from downhole electrical data using heuristic models (e.g., Archie and Kozeny-Carman's equations) relating electrical conductivity to porosity and permeability. Although proven to be predictive for many sandstone reservoirs, the models mostly fail when applied to carbonate reservoirs that generally display extremely complex pore network structures. In this article, we investigate the control of the three-dimensional (3-D) geometry and morphology of the pore network on the electrical and flow properties, comparing core-scale laboratory measurements and 3-D x-ray microtomography image analysis of samples from a Miocene reefal carbonate platform located in Mallorca (Spain). The results show that micrometer- to centimeter-scale heterogeneities strongly influence the measured macroscopic physical parameters that are then used to evaluate the hydrodynamic properties of the rock, and therefore, existing models might not provide accurate descriptions because these heterogeneities occur at scales smaller than those of the integration volume of the borehole geophysical methods. However, associated with specific data processing, 3-D imagery techniques are a useful and probably unique mean to characterize the rock heterogeneity and, thus, the properties variability.
ISSN: 0149-1423

hal-00950066
https://hal.archives-ouvertes.fr/hal-00950066
DOI : 10.1306/05221312134

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Mobile-immobile mass transfer is widely used to model non-Fickian dispersion in porous media. Nevertheless, the memory function, implemented in the sink/source term of the transport equation to characterize diffusion in the matrix (i.e., the immobile domain), is rarely measured directly. Therefore, the question can be posed as to whether the memory function is just a practical way of increasing the degrees of freedom for fitting tracer test breakthrough curves or whether it actually models the physics of tracer transport. In this paper we first present a technique to measure the memory function of aquifer samples and then compare the results with the memory function fitted from a set of field-scale tracer tests performed in the same aquifer. The memory function is computed by solving the matrix diffusion equation using a random walk approach. The properties that control diffusion (i.e., mobile-immobile interface and immobile domain cluster shapes, porosity, and tortuosity) are investigated by X-ray microtomography. Once the geometry of the matrix clusters is measured, the shape of the memory function is controlled by the value of the porosity at the percolation threshold and of the tortuosity of the diffusion path. These parameters can be evaluated from microtomographic images. The computed memory function compares well with the memory function deduced from the field-scale tracer tests. We conclude that for the reservoir rock studied here, the atypical non-Fickian dispersion measured from the tracer test is well explained by microscale diffusion processes in the immobile domain. A diffusion-controlled mobileimmobile mass transfer model therefore appears to be valid for this specific case.
ISSN: 0043-1397

insu-00373705
https://hal-insu.archives-ouvertes.fr/insu-00373705
https://hal-insu.archives-ouvertes.fr/insu-00373705/document
https://hal-insu.archives-ouvertes.fr/insu-00373705/file/Gouze_et_al-2008-Water_Resources_Research.pdf
DOI : 10.1029/2007WR006690

Éditeur(s) : HAL CCSD
Résumé : In order to minimize CO2 atmospheric concentration, a solution consists in sequestrating CO2 in geological reservoirs. To estimate long term risks, it is necessary to quantify the couplings between reaction processes as well as structural and hydrodynamical modifications. We realised two experimental benches enabling injecting CO2-enriched-brine in conditions corresponding to in situ storage (T < 200 oC and P < 200 bar) and developed
an experimental protocol using X-Ray microtomography and fluid and rock analyses in order to measure the variations of physical and chemical parameters.
The study of carbonated reservoirs near the injection well, allows quantifying different k-phi relationships depending on the dissolution processes and triggered by the local fluid chemical composition and initials conditions. Away from the injection well, we observe carbonate precipitation decreasing the permeability. The study of fracturated caprock samples shows that alternative percolation of CO2-enriched-brine and CO2 gas increases the fracture permeability.
The study of silicated rocks indicates carbonate precipitation in zeolite sandstone and sintered dunite grains. Nevertheless, in zeolite sandstone we also observe the precipitation of clay particles located in the uid pathways which decrease strongly the permeability.
Afin de minimiser la concentration en CO2 dans l'atmosphère une solution consiste à le séquestrer dans les réservoirs géologiques. Pour évaluer les risques à long terme, il est nécessaire de quantifier les couplages entre les processus réactionnels et les modifications structurales et hydrodynamiques. Dans cette optique, nous avons construit deux dispositifs expérimentaux permettant d'injecter des saumures chargées en CO2 dans les conditions de stockage (T < 200 °C et P < 200 bar) et mis en oeuvre un protocole expérimental utilisant la microtomographie RX et l'analyse des roches et des fuides pour quantifier les variations des paramètres physiques et chimiques. Dans le cas des réservoirs carbonatés, on observe, près du puits d'injection, une forte variabilité des relations k-phi en fonction du régime de dissolution contrôlé par la chimie locale du fluide, ainsi que par les conditions initiales. A plus grande distance, on observe des processus de précipitation diminuant fortement la perméabilité. L'étude des roches de couverture fracturées (argilite) a montré qu'une percolation alternée d'une saumure chargée en CO2 et de CO2 gaz augmentait la perméabilité de fracture. Dans le cas des roches silicatées, la précipitation de carbonates est mise en évidence aussi bien dans les grès à zéolites que dans les frittés de dunite de San Carlos. Cependant, dans les grès à zéolites, la précipitation d'une phase argileuse est observée dans les chemins d'écoulement et engendre une forte diminution de la perméabilité.
https://tel.archives-ouvertes.fr/tel-00416408

tel-00416408
https://tel.archives-ouvertes.fr/tel-00416408
https://tel.archives-ouvertes.fr/tel-00416408/document
https://tel.archives-ouvertes.fr/tel-00416408/file/These_Luquot.pdf

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Sea cows (manatees, dugongs) are the only living marine mammals to feed solely on aquatic plants. Unlike whales or dolphins (Cetacea), the earliest evolutionary history of sirenians is poorly documented, and limited to a few fossils including skulls and skeletons of two genera composing the stem family of Prorastomidae (Prorastomus and Pezosiren). Surprisingly, these fossils come from the Eocene of Jamaica, while stem Hyracoidea and Proboscidea - the putative sister-groups to Sirenia - are recorded in Africa as early as the Late Paleocene. So far, the historical biogeography of early Sirenia has remained obscure given this paradox between phylogeny and fossil record. Here we use X-ray microtomography to investigate a newly discovered sirenian petrosal from the Eocene of Tunisia. This fossil represents the oldest occurrence of sirenians in Africa. The morphology of this petrosal is more primitive than the Jamaican prorastomids' one, which emphasizes the basal position of this new African taxon within the Sirenia clade. This discovery testifies to the great antiquity of Sirenia in Africa, and therefore supports their African origin. While isotopic analyses previously suggested sirenians had adapted directly to the marine environment, new paleoenvironmental evidence suggests that basal-most sea cows were likely restricted to fresh waters.
ISSN: 1932-6203

hal-00807308
https://hal.archives-ouvertes.fr/hal-00807308
DOI : 10.1371/journal.pone.0054307

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study explores the dynamics of porosity and reactive surface area changes during porous limestone dissolution by CO2-rich water. The Sr and Ca concentrations in both the rock and the outlet solution are used to evaluate the reactive surface area changes of the two rock-forming calcites, i.e. micrite grains and sparite crystals, which have different trace element signatures. The geometric surface area measured with X-ray microtomography decreases slightly whereas the reactive surface area increases continuously with increasing porosity from 20.3 to 30.2%. Surprisingly, changes in reactive surface areas are very different between the two calcites. The reactive surface area changes in the micrite are parabolic while the reactive surface area of sparite increases greatly. The numerical model HYTEC is used to model the change in reactive surface areas during the experiment. Different geometrical models are tested. The model based on spherical-grain dissolution and spherical-pore growth fails to reproduce the experimental results, while the sugar-lump model provides reasonable agreement with the experiment.
ISSN: 0009-2541

hal-00445274
https://hal.archives-ouvertes.fr/hal-00445274
DOI : 10.1016/j.chemgeo.2009.01.032

Éditeur(s) : HAL CCSD
Résumé : Geological storage of CO2 is one of diverse technologies being explored to reduce atmospheric carbon fromindustrial processes (i.e. fossil fuel combustion). One of the specific features of CO2 injection is the possibility ofgeochemical reactions (dissolution – precipitation) between mobile reactive brine (e.g. formation water enrichedin CO2) and the host rock during the spatial and temporal evolution of CO2. That leads to modifications in thepore structure, which in turn change the flow dynamics of the reservoir (e.g. the permeability k). Then, thesesstructural modifications can largely control the injectivity, so that the pressure field in the reservoir and also theCO2 propagation. Accordingly, it is crucial to explore the changes in the reservoir properties (e.g. structural andhydrodynamic) induced during a CO2 injection and specially the relationships between them (e.g. k or reactivesurface-Sr versus porosity-φ , k versus rock heterogeneity), for developing predictive modelling tools of thetransport and reaction processes occurring during a CO2 injection and reliable risk assessment. In the case ofcarbonate rocks, the application of the predictive models of transport and reaction is still challenging, because oftheir high heterogeneity so that the incertitude in the reaction kinetics of carbonate minerals.From this perspective, we realized brine-enriched in CO2 percolation experiments through carbonate rocksamples in thermodynamic conditions expected during CO2 injection in deep reservoirs (T = 100°C et P =12MPa). The permeability changes k(t) is monitored during the experiments and the porosity variationφ (t) iscalculated from chemical analyses of the sampled outlet fluids, using ICP-EAS. The pore structure modificationsare investigated from high resolution X ray micro tomography images acquired from the synchrotron ofGrenoble (ESRF). Depending to the dissolution regime, controlled by the reservoir rock fabric and the chemicalcomposition of the brine (e.g. PCO2), we observed that a modification of pore structure can either improve(atypical result in dissolution context) or impair the value of the permeability k.
Le stockage géologique du CO2 est l’une des diverses technologies étant explorées afin deréduire les émissions de carbone atmosphérique des processus industriels (i.e. combustion del’énergie fossile). L’une des spécifiques caractéristiques de l’injection du CO2 en profondeurreste la possibilité de réactions géochimiques (dissolution-précipitation) entre la saumureréactive mobile (e.g. eau de formation enrichie en CO2) et la roche encaissante durantl’évolution spatiale et temporelle du CO2, conduisant à des modifications dans la structure despores et par conséquent dans les propriétés d’écoulement du réservoir (e.g. la perméabilité k).Donc, ces changements structuraux peuvent largement contrôler l’injectivité, ainsi que lechamp de pression dans le réservoir et aussi la propagation du CO2. Il demeure ainsi cruciald’explorer les changement dans les propriétés de réservoirs (e.g. structurales ethydrodynamiques) induits durant une injection de CO2 et explicitement les relations existantesentre eux (e.g. k ou surface réactive-Sr versus porosité-φ , k versus hétérogénéité de la roche),afin de développer des outils de modélisation prédictive des processus de transport etréactionnels se produisant durant une injection de CO2 et d’évaluer de façon fiable les risques.Dans le cas des réservoirs carbonatés, l’application des modèles prédictifs de transport réactifdemeure toujours un enjeu, car contrainte par la forte hétérogénéité en leur sein ainsi que parl’incertitude dans la cinétique de réactions des minéraux carbonatés dans ce contexte. Danscette optique, nous avons réalisé des expériences de percolation à travers des échantillons deroches carbonatées dans les conditions thermodynamiques de stockage en profondeur (T =100°C et P =12 MPa). L’évolution de la perméabilité k(t) est suivie au cours desexpériences ; et la variation de la porosité φ (t) est calculée à partir des résultats d’analyseschimiques au ICP-AES des fluides de sortie échantillonnés. L’investigation des modificationsapportées à la structure des pores est réalisée par le biais de la Micro-Tomographie hauterésolution à rayon X, acquise au synchrotron de Grenoble (e.g. ESRF).Dépendant du régime de dissolution, contrôlé par la fabrique de la roche réservoir et lacomposition chimique de la saumuré chargée en CO2 (e.g. PCO2 engagée), on a observéqu’une modification de la structure de la roche peut soit améliorer soit détériorer (résultatatypique en contexte de dissolution) la valeur de la perméabilité k.
https://hal.archives-ouvertes.fr/tel-01142136

tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136/document
https://hal.archives-ouvertes.fr/tel-01142136/file/thesemangane2013.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Both flow field heterogeneity and mass transfer between mobile and immobile domains have been studied separately for explaining observed anomalous transport. Here we investigate non-Fickian transport using high-resolution 3-D X-ray microtomographic images of Berea sandstone containing microporous cement with pore size below the setup resolution. Transport is computed for a set of representative elementary volumes and results from advection and diffusion in the resolved macroporosity (mobile domain) and diffusion in the microporous phase (immobile domain) where the effective diffusion coefficient is calculated from the measured local porosity using a phenomenological model that includes a porosity threshold ( inline image) below which diffusion is null and the exponent n that characterizes tortuosity-porosity power-law relationship. We show that both flow field heterogeneity and microporosity trigger anomalous transport. Breakthrough curve (BTC) tailing is positively correlated to microporosity volume and mobile-immobile interface area. The sensitivity analysis showed that the BTC tailing increases with the value of inline image, due to the increase of the diffusion path tortuosity until the volume of the microporosity becomes negligible. Furthermore, increasing the value of n leads to an increase in the standard deviation of the distribution of effective diffusion coefficients, which in turn results in an increase of the BTC tailing. Finally, we propose a continuous time random walk upscaled model where the transition time is the sum of independently distributed random variables characterized by specific distributions. It allows modeling a 1-D equivalent macroscopic transport honoring both the control of the flow field heterogeneity and the multirate mass transfer between mobile and immobile domains.
ISSN: 0043-1397

hal-01278285
https://hal.archives-ouvertes.fr/hal-01278285
DOI : 10.1002/2015WR017645

Éditeur(s) : HAL CCSD
Résumé : The heterogeneous nature and sometimes karstified carbonate environments has a direct impact on many environmental issues, such as coastal aquifers affected by saltwater intrusion. At the south of the island of Mallorca (Spain), the Llucmajor carbonate platform offers a privileged site for the study of such intrusions including the experimental site of Campos who meets the intrusion at shallow depth. The characterization of heterogeneous properties passes through a preliminary description of the properties of carbonate reservoirs, including those of the porosity. According to the wide range of sizes of heterogeneities from micrometer to hundreds of meters, the use of multiscale methods is required. This thesis focused on the determination of multiscale porosities from the microporosity to karstic porosity, and of relationships between observation scale changes of these properties. At the micron scale, high-resolution X-ray microtomography allows to extract the microporosity and the microporous network connectivity. At lower resolution (mm), X-ray tomography is also used to study the micro- and macro-porous network at the core scale which is already allocated to number of observations and measurements, including petrophysical. At the borehole scale, the wall images are used to identify the dissolved zones from centimeter macropores to plurimetric karstic cavities. At the larger scale, surface geophysics study the lateral extension of the karsts and heterogeneities. Finally, the porous structure of the studied site is integrated with its wide range of scales into the regional geology of the Llucmajor platform. Thus, the hydrogeophysical observatory set up on the site of Campos to monitor the spreading of salt water in the aquifer is integrated in its geological and petrophysical context, in order to refine the interpretation of its variations of salinity measurements during the time.
La nature hétérogène et parfois karstifiée des milieux carbonatés a un impact direct sur nombre de problématiques environnementales, comme celle des aquifères côtiers affectés par une intrusion d'eau salée. Au sud de l'ile de Majorque (Baléares, Espagne), la plate-forme carbonatée de Llucmajor offre un site privilégié pour l'étude de telles intrusions notamment avec le site expérimental de Campos, qui rencontre l'intrusion à faible profondeur. La caractérisation des propriétés hétérogènes du réservoir passe par une description préalable des propriétés des réservoirs carbonatés et notamment celle de la porosité. Au regard de la large gamme d'échelles d'hétérogénéités allant du micromètre à la centaine de mètre, l'utilisation de méthodes multi-échelles est nécessaire. Ce travail de thèse a porté sur la caractérisation multi-échelle de la porosité, allant de la microporosité à la porosité karstique, et l'établissement de relations entre les changements d'échelles d'observation de ces propriétés. A très petite échelle, la microtomographie haute-résolution à rayons X extrait à l'échelle du micron la microporosité et la connectivité des réseaux microporeux. A plus basse fréquence (celle du mm), la tomographie est également utilisée afin d'étudier le réseau micro- et macroporeux à l'échelle des carottes, à laquelle sont réalisées nombre d'observations et de mesures, notamment pétrophysiques. A l'échelle du puits, les images de paroi permettent d'identifier les zones de dissolution allant des macropores centimétriques aux cavités karstiques plurimétriques. A plus grande échelle, la géophysique de surface permet d'étudier l'extension latérale de ces karsts et hétérogénéités. Enfin, la structure poreuse du site étudié sur cette vaste gamme d'échelles est intégrée à la géologie régionale de la plate-forme de Llucmajor. Ainsi, l'observatoire installé sur le site pour surveiller la propagation de l'eau salée dans l'aquifère a pu être replacé dans son contexte géologique et pétrophysique, afin d'affiner l'interprétation de ses mesures de variations de salinité au cours du temps.
https://tel.archives-ouvertes.fr/tel-00633488

tel-00633488
https://tel.archives-ouvertes.fr/tel-00633488
https://tel.archives-ouvertes.fr/tel-00633488/document
https://tel.archives-ouvertes.fr/tel-00633488/file/TheseHebert.pdf

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
The extinct Odontopterygiformes are the sole birds known to possess strong and sharp bony pseudoteeth, the shape and location of which are closely mimetic of real teeth. The structure of the pseudoteeth is investigated here in a late Pliocene/early Pleistocene species, Pelagornis mauretanicus, using X-ray microtomography and thin sections. The results are interpreted with regard to the pseudotooth mode of growth, and have implications concerning aspects of Pelagornis ecology. The larger pseudoteeth are hollow and approximately cone-shaped, and the smaller ones are rostro-caudally constricted. The walls of pseudoteeth are composed of bone tissue of the fibro-lamellar type, which is intensively remodeled by Haversian substitution. The jaw bones display the same structure as the pseudoteeth, but their vascular canals are oriented parallel to the long axis of the bones, whereas they are perpendicular to this direction in the pseudoteeth. There is no hiatus or evidence of a fusion between the pseudoteeth and the jaw bones. Two possible models for pseudotooth growth are derived from the histological data. The most plausible model is that pseudotooth growth began after the completion of jaw bone growth, as a simple local protraction of periosteal osteogenic activity. Pseudotooth development thus occurred relatively late during ontogeny. The highly vascularized structure and the relative abundance of parallel-fibered bone tissue in the pseudoteeth suggest poor mechanical capabilities. The pseudoteeth were most likely covered and protected by the hardened, keratinized rhamphotheca in the adult during life. The late development of the pseudoteeth would involve a similarly late and/or partial hardening of the rhamphotheca, as displayed by extant Anseriformes, Apterygiformes and some Charadriiformes. This would add support to the hypothesis of a close phylogenetic relationship between Odontopterygiformes and Anseriformes. The late maturation of the Pelagornis feeding apparatus, and hence the delayed capability for efficient prey catching, suggests that Pelagornis was altricial.
ISSN: 1932-6203

hal-01545486
https://hal.archives-ouvertes.fr/hal-01545486
DOI : 10.1371/journal.pone.0080372

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Numerical programs for simulating flow and reactive transport in porous media are essential tools for predicting reservoir properties changes triggered by CO2 underground injection. At reservoir scale, meshed models in which equations are solved assuming that constant macroscopic properties can be defined in each cells, are widely used. However, the parameterization of the dissolution-precipitation problem and of the feedback effects of these processes on the flow field is still challenging. The problem arises from the mismatch between the scales at which averaged parameters are defined in the meshed model and the scale at which chemical reactions occur and modify the pore network geometry. In this paper we investigate the links between the dissolution mechanisms that control the porosity changes and the related changes of the reactive surface area and of the permeability. First, the reactive surface area is computed from X-ray microtomography data obtained before and after a set of dissolution experiments of pure calcite rock samples using distinctly different brine-CO2 mixtures characterizing homogeneous to heterogeneous dissolution regimes. The results are used to validate the power law empirical model relating the reactive surface area to porosity proposed by Luquot and Gauze (2009). Second, we investigate the spatial distribution of the effective hydraulic radius and of the tortuosity, two structural parameters that control permeability, in order to explain the different porosity-permeability relationships observed for heterogeneous and homogeneous dissolution regimes. It is shown that the increase of permeability is due to the decrease of the tortuosity for homogeneous dissolution, whereas it is due to the combination of tortuosity decrease and hydraulic radius increase for heterogeneous dissolution. For the intermediate dissolution regime, identified to be the optimal regime for increasing permeability with small changes in porosity, the increase of permeability results from a large increase in the mean effective hydraulic radius of the sample.
ISSN: 0169-7722

hal-00617671
https://hal.archives-ouvertes.fr/hal-00617671
DOI : 10.1016/j.jconhyd.2010.07.004

Éditeur(s) : HAL CCSD
Résumé : In coastal carbonate aquifers submitted to a saline intrusion, water - rock interactions processes at the interface between freshwater and saltwater are a cause for heterogeneities development within the porous media. The dissolutions and precipitations induced by the mixing zone play a major role in the transport properties of the reservoir and so in the long term evolution of the saltwater intrusion. The characterization and the in situ observation of a current saline intrusion in the Llucmajor carbonate platform at the experimental site of Ses Sitjoles (South-Easth of Mallorca Island, Spain), allowed to study the temporal evolution of the saltwater intrusion and the biogeochemical processes active in the mixing zone. The influence of microstructure, characterized using X-Ray microtomography, on the petrophysical and flow properties was investigated in laboratory and flow-through experiments were also conducted to study the modifications of the microstructures when submitted to water - rock interactions processes. The mixing zone at the Ses Sitjoles site appears as quite thick and not very sensitive to climate and anthropic stress and is proved to be the locus of active microbiological activity. Laboratory studies highlight a strong control of the microporosity on transport processes and of pCO2 on water - rock interactions. The percolation experiments of slightly reactive waters reveal calcite dissolution together with a decrease in permeability due to a rearrangement of micro-grains within the microporous network.
Les processus d'interactions fluide-roche à l'interface eau douce-eau salée, dans les aquifères carbonatés côtiers soumis à une intrusion saline, sont une des causes du développement d'hétérogénéités dans la structure du milieu poreux. Les dissolutions et/ou précipitations engendrées par la présence de cette zone de mélange jouent un rôle déterminant pour les propriétés de transport du réservoir et donc l'évolution à long terme de l'intrusion d'eau salée. En prenant l'exemple de la plateforme carbonatée de Llucmajor au niveau du site expérimental de Ses Sitjoles (Sud-Est de Majorque, Espagne), un travail de caractérisation et d'observation in situ à moyen terme de l'intrusion saline actuelle de ce réservoir permet de décrire son évolution temporelle et les processus biogéochimiques actifs dans la zone de mélange. L'influence de la microstructure du milieu poreux, caractérisée par microtomographie RX, sur les propriétés pétrophysiques et hydrodynamiques est étudiée en laboratoire et des expériences de percolations d'eaux réactives (mélanges eau douce - eau salée et eau pure chargée en CO2) sont réalisées afin d'étudier les modifications de ces microstructures lorsqu'elles sont soumises à des interactions eau - roche. La zone de mélange eau douce - eau salée rencontrée au niveau du site de Ses Sitjoles est large et peu sensible aux contraintes extérieures (climatologiques et anthropiques) et constitue un lieu d'activité microbiologique particulièrement actif. En laboratoire, on observe un fort contrôle des phénomènes de transport par la microporosité et des processus d'interactions eau - roche par la pCO2. Dans le cas d'une percolation de fluides moyennement réactifs, les expériences mettent en évidence une dissolution de calcite accompagnée par une diminution de la perméabilité, liée à un réarrangement des micro-grains à l'intérieur du réseau microporeux.
https://tel.archives-ouvertes.fr/tel-00767152

tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152/document
https://tel.archives-ouvertes.fr/tel-00767152/file/thesegaring.pdf

Éditeur(s) : HAL CCSD
Résumé : The main purpose of this thesis was to characterize and to model the hydrodynamic and thermochemical processes leading to the alteration of the wellbore cement materials under borehole conditions. Percolation experiments were performed on fractured cement samples under CO2 storage conditions (60°C and 10MPa). Injection flow rate was dictated by the fracture aperture of each sample. CO2 enriched brine was flowed along the fracture aperture, and permeability changes as well as chemical evolution of major cations were continuously acquired during the experiment time. Reaction paths developed by the alteration of the cement were characterized using microtomography and ESEM images. The experiments conducted using samples presenting large fracture apertures during 5h showed that permeability was maintained constant during the experiment time. Three reacted layers were displaying by the alteration of portlandite and CSH. Long term experiment (26h) conducted with large initial fracture aperture showed a decrease of the permeability after 15hours of CO2 exposure. Otherwise, experiments performed on samples presenting narrow apertures indicated the conversion of portlandite and CSH to calcite leading to the permeability reduction and the fracture clogging. Assemblages of phases and chemical changes were modelled using GEMS-PSI speciation code. We studied also using a coupled transport-reactive model the conditions leading to the cement alteration and the formation of associated layers.
L'objectif de cette thèse était de modéliser à partir des expériences de percolation-réactive, les processus hydrodynamique et réactionnel qui gouvernent l'altération des ciments de puits. Différentes expériences ont été réalisées dans des conditions représentatives de celles du stockage du CO2. Des échantillons fracturés ont été utilisés pour injecter une saumure enrichie en CO2 à 60°C et 10MPa et à différentes pressions partielles de CO2. Le débitd'injection variait en fonction des propriétés hydrauliques de l'échantillon exposé. L'injection d'une saumure enrichie en CO2 à débit constant à travers une fracture supposée plane a permis d'étudier les modifications des propriétés hydrodynamiques et ces conséquences sur la géochimie et la microstructure du ciment altéré. L'impact dynamique de l'évolution microstructurale a été mis en évidence. Les expériences conduites sur des échantillons présentant de larges ouvertures, réalisées sur une durée de 5 h, ont montré que la perméabilité était maintenue constante le long de l'expérience. Trois couches d'altération se sont développées consécutivement à la dissolution de la portlandite et la décalcification des CSH. L'altération a entrainé la précipitation des carbonates et de la silice amorphe à proximité de la fracture. Dans le cas d'une expérience longue durée appliquant les mêmes conditions que précédemment on a observé que la croissance de la silice amorphe a entrainé la diminution de la perméabilité. Par ailleurs les expériences effectuées sur des échantillons présentant de faibles ouvertures, ont indiqué que la conversion de la portlandite en calcite conduit au colmatage de la fracture. L'évolution des assemblages de phases conduisant à la formation des carbonates et de la silice amorphe a été modélisée à partir du code géochimique GEMS. Les mécanismes de diffusion et les processus de mise en place des couches d'altération ont été étudiés à partir d'un modèle analytique et d'un modèle de transport réactif à partir du code géochimique PHREEQC.
https://tel.archives-ouvertes.fr/tel-01038034

tel-01038034
https://tel.archives-ouvertes.fr/tel-01038034
https://tel.archives-ouvertes.fr/tel-01038034/document
https://tel.archives-ouvertes.fr/tel-01038034/file/theseabdoulghafour.pdf