Éditeur(s) : Université des Antilles AREBio Groupe de recherche BIOSPHERES : BIOlogie, Sciences Physiques & Humaines pour les énergies Renouvelables, l
Extrait de : 1er colloque international BIOSPHERES, du 18 au 20 juin 2019. Université des Antilles
Description : The Chemical Purification, analysis and Screening core laboratories (CPAS) are located at the University of South Florida campus in Tampa. This core offers instrumentation and expertise in fractionation, purification, and various chemical analyses to support synthetic and natural products drug discovery research groups. Our main equipment are dedicated to chromatographic separation and purification (MPLC, HPLC) and mass-spectrometry for analytic detection, quantification and identification (LC-MS SQ, QqQ and QToF). The CPAS services also include Circular Dichroism spectrometry, general spectroscopic characterization (UV, FTIR), lyophilization (bench top and high capacity freeze-dryers), synthesis (microwave reactor), ADME screening (permeability and drug solubility testing), and high-throughput screening development capability (automated liquid handler and multimode plate reader). An example of three significant studies will be presented at the conference to illustrate the CPAS core facility services: 1) Identification of new bioactive compounds from mangrove endophytic fungi as potential alternatives to malaria drug resistance, 2) Myricanol isolated from Bayberry (Myrica Cerifera) and its synthetic derivatives targeting the microtubuleassociated protein tau accumulation in the Alzheimer's disease and 3) New ent-labdane diterpenes with solid tumor cell lines antiproliferative properties from the endemic plant Eupatorium obtusissmum from the island of Hispaniola. The core provides research lab training workshops in advanced technology and assistance so users can operate any instruments available in the laboratories to successfully accomplish their analyses and research projects.

Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V19063
V19063

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A reactive percolation experiment was conducted by injecting seawater into a permeable olivine aggregate at 190 °C and 19 MPa to explore the relationships between hydration reactions and hydrodynamic properties during the onset of serpentinization in the ultramafic lithosphere exposed at mid-ocean ridges. The experiment was stopped after 23 days when the sample became impermeable. The initial flow rate was 0.2 mL/h and then was decreased down to 0.06 mL/h after 8 days. Permeability decreased continuously throughout the experiment. The analyses of fluid chemistry time series and of the mineralogy and structure of the reacted sample showed olivine dissolution and precipitation of proto-serpentine, brucite and Fe-oxides. These reactions are controlled by coupled hydrodynamic and chemical processes interacting at different time and spatial scales. Their first characteristic is the production of silica rich outlet fluids in disequilibrium with the observed reacted mineral assemblages. These compositions are interpreted as resulting from a suite of coupled dissolution-precipitation reactions, controlled at the pore scale by surface kinetic processes, that rapidly reaches steady-state (constant fluid composition independent of fluid flux). Hence, the effective rate of serpentinization was controlled, to the first order, by the transport of reactants during the experiment. Mass balance calculations show that the rate of olivine conversion was fast (0.2-0.5 wt%/day), yet only ∼8 wt% of the olivine sample reacted, because the permeability drop limited fluid circulation. Porosity varied little during the experiment compared to permeability changes: the decrease of permeability was explained by the structure of the newly formed serpentine favouring the clogging of fluid paths. The rate at which permeability decreased was the fastest at low flux conditions. This suggests that permeability changes were not controlled simply by the kinetics of the serpentinization reactions, but mainly reflected the development of low Peclet pore scale zones forming micro-environments that control the serpentinization reaction-paths. These results outline the need to take into account the coupling of hydrodynamic and chemical processes when modelling the effects of reactive transport within the hydrating oceanic lithosphere.
ISSN: 0012-821X

hal-00855043
https://hal.archives-ouvertes.fr/hal-00855043
DOI : 10.1016/j.epsl.2013.03.052

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : International audience
We describe the structure, microstructure, and petrophysical properties of fault rocks from two normal fault zones formed in low-porosity turbiditic arkosic sandstones, in deep diagenesis conditions similar to those of deeply buried reservoirs. These fault rocks are characterized by a foliated fabric and quartz-calcite sealed veins, which formation resulted from the combination of the (1) pressure solution of quartz, (2) intense fracturing sealed by quartz and calcite cements, and (3) neoformation of synkinematic white micas derived from the alteration of feldspars and chlorite. Fluid inclusion microthermometry in quartz and calcite cements demonstrates fault activity at temperatures of 195degC to 268degC. Permeability measurements on plugs oriented parallel with the principal axes of the finite strain ellipsoid show that the Y axis (parallel with the foliation and veins) is the direction of highest permeability in the foliated sandstone (10-2 md for Y against 10-3 md for X, Z, and the protolith, measured at a confining pressure of 20 bars). Microstructural observations document the localization of the preferential fluid path between the phyllosilicate particles forming the foliation. Hence, the direction of highest permeability in these fault rocks would be parallel with the fault and subhorizontal, that is, perpendicular to the slickenlines representing the local slip direction on the fault surface. We suggest that a similar relationship between kinematic markers and fault rock permeability anisotropy may be found in other fault zone types (reverse or strike-slip) affecting feldspar-rich lithologies in deep diagenesis conditions.
ISSN: 0149-1423

hal-00903428
https://hal.archives-ouvertes.fr/hal-00903428
DOI : 10.1306/03071312127

Éditeur(s) : HAL CCSD Royal Society of Chemistry
Résumé : International audience
Abstract View references (60)Here we show the long term performance at high temperatures of a multi-tube module containing 8 membranes in 4 parallel lines with a total of 545 cm 2 area. The membranes were prepared via thin film dip coating of cobalt oxide silica (CoO xSi) sol-gel on tubular alumina supports. A preliminary study found that the sol-gel containing 20 mol% cobalt oxide formed the best microporous structure with the highest surface area and pore volume. All resulting membranes delivered permeances of ∼1 × 10 -7 mol m -2 s -1 Pa -1 at 500 °C, indicating a high repeatability for the membrane fabrication process. The permselectivities of helium (He) and hydrogen (H 2) over carbon dioxide (CO 2) and nitrogen (N 2) increased from 10-20 at 100 °C to values close to 1000 at 500 °C. Additionally, the apparent energies of activation (E act) for the smaller kinetic diameter gases He and H 2 at 12.2 and 19.5 kJ mol -1 were high and contrary to the negative values for larger gases N 2 and CO 2 at -1.8 and -7.4 kJ mol -1. These remarkable results were attributed to the molecular sieving mechanism of the microporous silica which was enhanced by the embedding of cobalt oxide into the matrix, delivering structural control with an average pore size of 3 Å. The E act for H 2 permeance was higher than that of He, indicating that the cobalt oxide played an important role in H 2 transport. Two membrane lines performed exceptionally well for binary gas mixture processing with H 2 purity reaching values close to 100% in the permeate stream for argon (Ar) concentrations of up to 80% in the retentate stream. A major finding here is that the binary gas selectivity was independent of temperature, contrary to the permselectivity observed for single gas permeance. Further, the H 2 flow rate was greatly affected by the concentration of Ar in the mixture, while the temperature dependency played only a marginal role. In particular, competitive adsorption in the percolative pathways containing pore constrictions or bottlenecks of the anisotropic CoO xSi matrix allowed Ar to impede H 2 diffusion. Finally, the CoO xSi membranes proved thermally stable and robust for 2000 h of testing for various thermal cycles up to 500 °C. © The Royal Society of Chemistry 2012.
Energy & Environmental Science

hal-01683199
https://hal.univ-antilles.fr/hal-01683199
DOI : 10.1039/c2ee03247c

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A set of four reactive flow-through experiments at temperature T = 100 degrees C and total pressure P=12 MPa was performed in limestone reservoir samples. By using various ranging from 0.7 to 10 MPa, these experiments mimic mass transfers occurring (1) near the injection well, where the brine is almost saturated with CO2 (i.e. P-CO2 approximate to P), and (2) at increasing distances from the injection well, where the fluid displays lower values and higher divalent cation concentrations due rock dissolution along the fluid pathway. Results for P-CO2 = 10 MPa show non-uniform dissolution features associated with transport-controlled mass transfer, while reaction-controlled uniform dissolution is observed for P-CO2 = 2.5 MPa. The experiment with P-CO2 = 6 MPa allows investigating in detail the transition from transport-to reaction-controlled dissolution. Conversely, the experiment reproducing conditions far from the injection well (P-CO2 = 0.7 MPa), shows a decrease of porosity triggered by the precipitation of Mg-rich calcite. For all the dissolution experiments, the time-resolved porosity phi(t) can be modeled by a simple non-linear equation including parameters that characterise the dissolution regime triggered by the reactivity of the inlet fluid (measured by the Damkohler number, Da). Furthermore, all dissolution experiments display power scaling between permeability (k) and porosity (phi) with distinctly different scaling exponents characterising the reactivity of the fluid percolating the sample, independently from the decrease with time of the reactive surface area. It is shown also that dissolution at moderate positive values of Da seems the most efficient to increase permeability and promote a rapid spreading of the reaction front, while inducing minimal modification of the porosity in the vicinity of the CO2 injection well. These results can be used to parameterize the k-phi function for modeling the earliest dissolution processes occurring in the vicinity of the reaction front.
ISSN: 0009-2541

hal-00445277
https://hal.archives-ouvertes.fr/hal-00445277
DOI : 10.1016/j.chemgeo.2009.03.028

Éditeur(s) : Wiley-blackwell Publishing, Inc
Résumé : Vibrio splendidus, strain LGP32, is an oyster pathogen associated with the summer mortalities affecting the production of Crassostrea gigas oysters worldwide. Vibrio splendidus LGP32 was shown to resist to up to 10 mu M Cg-Def defensin and Cg-BPI bactericidal permeability increasing protein, two antimicrobial peptides/proteins (AMPs) involved in C. gigas immunity. The resistance to both oyster Cg-Def and Cg-BPI and standard AMPs (polymyxin B, protegrin, human BPI) was dependent on the ompU gene. Indeed, upon ompU inactivation, minimal bactericidal concentrations decreased by up to fourfold. AMP resistance was restored upon ectopic expression of ompU. The susceptibility of bacterial membranes to AMP-induced damages was independent of the ompU-mediated AMP resistance. Besides its role in AMP resistance, ompU proved to be essential for the adherence of V. splendidus LGP32 to fibronectin. Interestingly, in vivo, ompU was identified as a major determinant of V. spiendidus pathogenicity in oyster experimental infections. Indeed, the V. splendidus-induced oyster mortalities dropped from 56% to 11% upon ompU mutation (Kaplan Meier survival curves, P < 0.01). Moreover, in co-infection assays, the ompU mutant was out competed by the wild-type strain with competitive indexes in the range of 0.1-0.2. From this study, ompU is required for virulence of V. splendidus. Contributing to AMP resistance, conferring adhesive properties to V. splendidus, and being essential for in vivo fitness, the OmpU porin appears as an essential effector of the C. gigas/V. splendidus interaction.
Environmental Microbiology (1462-2912) (Wiley-blackwell Publishing, Inc), 2010-04 , Vol. 12 , N. 4 , P. 951-963

Droits : 2010 Society for Applied Microbiology and Blackwell Publishing Ltd
http://archimer.ifremer.fr/doc/00003/11421/8044.pdf
DOI:10.1111/j.1462-2920.2009.02138.x
http://archimer.ifremer.fr/doc/00003/11421/

Éditeur(s) : HAL CCSD MDPI
Résumé : International audience
Intestinal absorption and brain permeation constitute key parameters of toxicokinetics for pesticides, conditioning their toxicity, including neurotoxicity. However, they remain poorly characterized in humans. The present study was therefore designed to evaluate human intestine and brain permeation for a large set of pesticides (n = 338) belonging to various chemical classes, using an in silico graphical BOILED-Egg/SwissADME online method based on lipophilicity and polarity that was initially developed for drugs. A high percentage of the pesticides (81.4%) was predicted to exhibit high intestinal absorption, with a high accuracy (96%), whereas a lower, but substantial, percentage (38.5%) displayed brain permeation. Among the pesticide classes, organochlorines (n = 30) constitute the class with the lowest percentage of intestine-permeant members (40%), whereas that of the organophosphorus compounds (n = 99) has the lowest percentage of brain-permeant chemicals (9%). The predictions of the permeations for the pesticides were additionally shown to be significantly associated with various molecular descriptors well-known to discriminate between permeant and non-permeant drugs. Overall, our in silico data suggest that human exposure to pesticides through the oral way is likely to result in an intake of these dietary contaminants for most of them and brain permeation for some of them, thus supporting the idea that they have toxic effects on human health, including neurotoxic effects.
ISSN: 1660-4601

hal-01560242
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01560242
PUBMED : 28665355
DOI : 10.3390/ijerph14070708

Éditeur(s) : HAL CCSD
Résumé : We present an experimental study of relations between hydraulic properties of clayey rocks and their deformation at bulk and micro scale. The experimentation is based on triaxial deformation of kaolinitic core samples, on permeability measurements, and on several methods of analysis of the microstructure. To produce the samples, remoulded kaolinite material is consolidated by axial loading up to 20 MPa in an oedometric cell. Then, in a triaxial cell, an undrained stress path is applied in order to induce shearing damage in the sample. The permeability of the sample is measured by fluid flow across the sample. Before and after these hydro-mechanical tests, the evolution and the homogeneity of the pore space and moreover the texture of the material are analysed by X-ray tomography, environmental scanning electron microscopy and thermic neutron diffraction. Contrary to expectations, the permeability at the sample scale does not vary significantly, although quite large deformation is reached. The final deformation is heterogeneous, with well-developed shear bands. It appears that the development of compacting and dilating zones generates a heterogeneous permeability field, which results in a negligible variation of the bulk permeability at the sample scale.
International Journal of Rock Mechanics and Mining Science

hal-00496407
https://hal.archives-ouvertes.fr/hal-00496407
DOI : 10.1016/j.ijrmms.2010.04.007

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The brittle to ductile transition (BDT) in rocks may strongly influence their transport properties (i.e., permeability, porosity topology ...) and the maximum depth and temperature where hydrothermal fluids may circulate. To examine this transition in the context of Icelandic crust, we conducted deformation experiments on a glassy basalt (GB) and a glass-free basalt (GFB) under oceanic crust conditions. Mechanical and micro-structural observations at a constant strain rate of 10(-5) s(-1) and at confining pressure of 100-300 MPa indicate that the rocks are brittle and dilatant up to 700-800 degrees C. At higher temperatures and effective pressures the deformation mode becomes macroscopically ductile, i.e., deformation is distributed throughout the sample and no localized shear rupture plane develops. The presence of glass is a key component reducing the sample strength and lowering the pressure of the BDT. In the brittle field, strength is consistent with a Mohr-Coulomb failure criterion with an internal coefficient of friction of 0.42 for both samples. In the ductile field, strength is strain rate-and temperature-dependent and both samples were characterized by the same stress exponent in the range 3 < n < 4.2 but by very different activation energy Q(GB) = 59 +/- 15 KJ/mol and Q(GFB) = 456 +/- 4 KJ/mol. Extrapolation of these results to the Iceland oceanic crust conditions predicts a BDT at similar to 100 degrees C for a glassy basalt, whereas the BDT might occur in non-glassy basalts at deeper conditions, i.e., temperatures higher than 550 +/- 100 degrees C, in agreement with the Icelandic seismogenic zone.
ISSN: 0148-0227

hal-00760905
https://hal.archives-ouvertes.fr/hal-00760905
DOI : 10.1029/2011JB008884

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Underground CO2 sequestration is highly recommended as an effective means of significantly decreasing CO2 concentration in the atmosphere. Mineral storage is the more secure technology, but requires the presence of high concentration of divalent cations in the pore-fluid. Results from CO2 percolation experiments through chlorite/zeolite-rich sandstone samples from the Pretty Hill Formation (Otway Basin, Australia) are presented. The dissolution of the laumontite (7 wt.%) and chamosite (7 wt.%) are the potential sources of calcium, iron and magnesium required for carbonate precipitation. The percolation experiment was setup to reproduce, at laboratory scale, the in situ temperature and pressure conditions (T = 95 degrees C and P = 10 MPa). The fluid injected at constant flow rate is a rock-equilibrated brine subsequently enriched in CO2 up to partial pressure of 6 MPa. We observe feldspars, laumontite and chamosite dissolution, kaolinite and silica precipitation and a noticeable sink of CO2 in the sample which is attributed to the precipitation of both amorphous carbon due to the reduction of CO2 and Fe-rich carbonate. Permeability decreases of about one order of magnitude due to the localization of the kaolinite precipitation in the main flow paths, while porosity increases. The high reactivity of this sandstone makes this reservoir a valuable target for CO2 mineralization, but the associated permeability decrease may limit the injection rate and the spreading of the CO2 in the reservoir.
ISSN: 0009-2541

hal-00712829
https://hal.archives-ouvertes.fr/hal-00712829
DOI : 10.1016/j.chemgeo.2011.11.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Improving the prediction of sub-seismic structures and their petrophysical properties is essential for realistic characterization of deformed sandstone reservoirs. In the present paper, we describe permeability contrasts induced by cataclastic deformation bands and faults in porous sandstones (766 data synthesized from field examples and the literature). We also discuss the influence of several factors, including tectonic regime, presence of a fault, burial depth, host sandstone porosity, and grain size and sorting for their initiation and permeability. This analysis confirms that permeability decrease is as a function of grain-crushing intensity in bands. Permeability reduction ranges from very limited in crush-microbreccia of compaction bands to high permeability reduction in cataclasites and ultracataclasites of shear-dominated bands, band clusters and faults. Tectonic regime, and especially normal-fault regime, with its tendency to localize strain and generate faults, is identified as the most important factor, leading to the formation of cataclastic bands with high permeability contrasts. Moreover, moderate burial depth (1–3 km) favors cataclastic bands with high permeability contrasts with respect to the host sandstone. High porosity, coarse-grain size and good grain sorting can slightly amplify the permeability reductions recorded in bands.
ISSN: 0191-8141

hal-01218408
https://hal.archives-ouvertes.fr/hal-01218408
DOI : 10.1016/j.jsg.2015.03.013

Éditeur(s) : HAL CCSD American Chemical Society
Résumé : International audience
Carbonation of ultramafic rocks in geological reservoirs is, in theory, the most efficient way to trap CO2 irreversibly; however, possible feedback effects between carbonation reactions and changes in the reservoir permeability must be considered to realistically assess the efficiency and sustainability of this process. We investigated changes in the hydrodynamic properties of sintered dunite samples by means of percolation experiments, under conditions analogous to that of in situ carbonation. Our results show that carbonation efficiency is controlled by the local renewal of the reactants and the heterogeneity of the pore structure. Preferential flow zones are characterized by the formation of magnetite and of a silica-rich layer at the olivine surfaces, which eventually inhibits olivine dissolution. Conversely, sustainable olivine dissolution together with coprecipitation of magnesite, siderite, and minor Mg-TOT-phyllosilicates, occur in reduced-flow zones. Thus carbonate precipitation only decreases porosity in zones where diffusion-controlled transport is dominant. Consequently, while high flow rates will decrease the carbonation efficiency of the reservoir and low flow rates may reduce the permeability irreversibly close to the injection point, moderate injection rates will ensure a partial carbonation of the rock and maintain the reservoir permeability.
ISSN: 0013-936X

hal-00424540
https://hal.archives-ouvertes.fr/hal-00424540
DOI : 10.1021/es8018429

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Results are reported for an acidic water flow-through experiment conducted in a fractured argillaceous limestone sample (73% carbonates). The change in fracture geometry and related parameters is reported for six data sets obtained from synchrotron X-ray microtomography experiments. High-resolution three-dimensional images of the sample allowed quantification of the changes in fracture morphology at a spatial resolution of 6 ;μm. Mineral mass loss and permeability changes in the sample were also determined. Several physico-chemical phenomena were identified during the experiment. Initial smooth fracture surfaces evolved rapidly toward rough surfaces with uneven clay coverage due to the preferential dissolution of carbonate minerals compared to clay minerals whose dissolution rate is about 106 slower. A microporous clay coating progressively developed at the fluid-rock interface during heterogeneous dissolution of the fracture, while the global dissolution rate of the fracture walls exponentially decreased. The increase in surface roughness and the presumed reorganization of clays caused a progressive reduction in permeability. During the last flow-through stage, a large decrease in sample permeability was attributed to the large removal of clay particles; this process was responsible for a dramatic collapse of the fracture walls near the sample inlet and led to the development of preferential flow pathways. The development of the clay coating also acted as a barrier to flow and mass transfer between calcite grains and bulk solution and affected transport processes within the fracture
ISSN: 0043-1397

hal-00405333
https://hal.archives-ouvertes.fr/hal-00405333
DOI : 10.1029/2006WR005379

Éditeur(s) : HAL CCSD
Résumé : In order to minimize CO2 atmospheric concentration, a solution consists in sequestrating CO2 in geological reservoirs. To estimate long term risks, it is necessary to quantify the couplings between reaction processes as well as structural and hydrodynamical modifications. We realised two experimental benches enabling injecting CO2-enriched-brine in conditions corresponding to in situ storage (T < 200 oC and P < 200 bar) and developed
an experimental protocol using X-Ray microtomography and fluid and rock analyses in order to measure the variations of physical and chemical parameters.
The study of carbonated reservoirs near the injection well, allows quantifying different k-phi relationships depending on the dissolution processes and triggered by the local fluid chemical composition and initials conditions. Away from the injection well, we observe carbonate precipitation decreasing the permeability. The study of fracturated caprock samples shows that alternative percolation of CO2-enriched-brine and CO2 gas increases the fracture permeability.
The study of silicated rocks indicates carbonate precipitation in zeolite sandstone and sintered dunite grains. Nevertheless, in zeolite sandstone we also observe the precipitation of clay particles located in the uid pathways which decrease strongly the permeability.
Afin de minimiser la concentration en CO2 dans l'atmosphère une solution consiste à le séquestrer dans les réservoirs géologiques. Pour évaluer les risques à long terme, il est nécessaire de quantifier les couplages entre les processus réactionnels et les modifications structurales et hydrodynamiques. Dans cette optique, nous avons construit deux dispositifs expérimentaux permettant d'injecter des saumures chargées en CO2 dans les conditions de stockage (T < 200 °C et P < 200 bar) et mis en oeuvre un protocole expérimental utilisant la microtomographie RX et l'analyse des roches et des fuides pour quantifier les variations des paramètres physiques et chimiques. Dans le cas des réservoirs carbonatés, on observe, près du puits d'injection, une forte variabilité des relations k-phi en fonction du régime de dissolution contrôlé par la chimie locale du fluide, ainsi que par les conditions initiales. A plus grande distance, on observe des processus de précipitation diminuant fortement la perméabilité. L'étude des roches de couverture fracturées (argilite) a montré qu'une percolation alternée d'une saumure chargée en CO2 et de CO2 gaz augmentait la perméabilité de fracture. Dans le cas des roches silicatées, la précipitation de carbonates est mise en évidence aussi bien dans les grès à zéolites que dans les frittés de dunite de San Carlos. Cependant, dans les grès à zéolites, la précipitation d'une phase argileuse est observée dans les chemins d'écoulement et engendre une forte diminution de la perméabilité.
https://tel.archives-ouvertes.fr/tel-00416408

tel-00416408
https://tel.archives-ouvertes.fr/tel-00416408
https://tel.archives-ouvertes.fr/tel-00416408/document
https://tel.archives-ouvertes.fr/tel-00416408/file/These_Luquot.pdf

Éditeur(s) : HAL CCSD
Résumé : This study is designed to improve the understanding of structural, mechanical and petrophysical characteristics of deformation bands in porous sandstone such as their potential influence on fluid storage or migration in reservoir setting. Structural and petrophysical analysis of band networks from Provence show that permeability of band is mainly controlled by the degree of cataclasis and diagenetic processes at depth. Map-scale analysis of band networks underlines the major influence of tectonic regime on band distribution, organization and permeability. Band associated to normal-fault regime (cataclasis and low-permeability) are located around map-sclae-fault whereas band associated to thurst-fault regime (moderate cataclasis and permeability) are pervasively distributed in all the area. Reverse-sense band are cataclastic and low-permeabiilty around the Roquemaure thrust, which show the potential role of large-scale fault on structural and petrophysical characteristics of bands. This analysis also shows the influence of fault propagation on formation of low permeability catacastic bands. This analysis suggests also granulometry as factor controlling organization of band networks.A mechanical analysis of deformation bands is realized based on results from Provence. Yield envelopes of these materials are calculated from analytical solution. Triaxial tests done on sandstone (L'Etang quarry, Orange) confirm the shape of yield envelope theoretically calculated. Triaxial tests done on the poorly-lithified sands (Boncavaï quarry, Uchaux) show grain size, sorting and packing influencing yield envelope and cataclastic band localization at shallow burial depth. Stress paths are calculated for burial and tectonic event (extension and contraction) using the relationship between main stress and secondary stresses (K0) calibrated from well data. These different results are integrated into a model which allows to estimate type and structural characteristics of bands susceptible to form for a known geological setting.A structural, mechanical and petrophysical model is established form these results. This model is calibrated by permeability data from deformation bands of Provence and results from the mechanical model of strain localization. This model is also confronted to a synthesis of permeability data from literature, which confirms the influence of the different controlling parameters integrated to the model. This model is applied for two sites of uranium exploration/exploitation in porous sandstone reservoirs and validated by field observations.
Cette étude est destinée à améliorer la compréhension des caractéristiques structurales, pétrophysiques et mécaniques des bandes de déformation dans les grès poreux ainsi que de leur rôle potentiel sur la migration ou le piégeage des fluides en milieu réservoir. L'analyse structurale et pétrophysique des réseaux de bandes de Provence montre que leur perméabilité découle principalement de l'intensité de la cataclase dans leur microstructure et des processus diagénétiques qui peuvent s'y localiser avec la profondeur. L'analyse régionale de ces réseaux de bandes souligne l'influence majeure du régime tectonique sur leur distribution, leur organisation et leur perméabilité. Les bandes associées au régime normal (cataclactiques et peu perméables) sont localisées autour des failles cartographiques, tandis que les bandes associées au régime inverse (modérement cataclastiques et perméables) sont distribuées dans toute la région. Les bandes inverses sont fortement cataclastiques et imperméables uniquement autour du chevauchement de Roquemaure ce qui montre le rôle potentiel de la présence de grande faille sur les caractéristiques structurales et pétrophysiques de ces bandes. D'autre part, cette analyse suggère que la granulométrie de l'encaissant peut influencer l'initiation et l'organisation des réseaux. L'analyse mécanique des bandes de déformation a ensuite été réalisée à partir des résultats obtenus en Provence. L'enveloppe de plasticité de ces matériaux est calculée à l'aide d'une solution analytique. Les essais triaxiaux menés sur le grès de la carrière de l'Etang (orange) confirment la forme de ces enveloppes estimées théoriquement. Les essais réalisés sur les sables de Boncavaï (Uchaux) montrent que la taille des grains, le tri et de la compaction dans ces matériaux peu lithifiés influent sur leurs enveloppes de plasticité et la localisation des bandes cataclastiques à faibles profondeurs. Les trajets de contraintes sont estimés pour les phases d'enfouissement et de chargement tectonique (extension et compression) à partir de la relation entre contrainte principale et contraintes secondaires (K0), calibrée à partir de données de forage. Ces résultats sont intégrés à un modèle permettant d'estimer la nature et les caractéristiques structurales des bandes susceptibles de se former dans un contexte géologique donné. Un modèle structural, mécanique et pétrophysique a été établir à partir de ces différents résultats. Ce modèle est calibré à partir des données de perméabilité mesurées sur les bandes de Provence et des résultats du modèle mécanique de localisation cité précédemment. Ce modèle a ensuite été confronté à une synthèse des données de perméabilité disponibles dans la littérature et confirme l'influence des différents paramètres de contrôle pris en compte dans le modèle. Ce modèle a enfin pu être appliqué sur deux sites d'explorations/exploitations d'uranium en réservoir gréseux poreux et validé par les résultats obtenus, en concordance avec les observations de terrain.
https://tel.archives-ouvertes.fr/tel-01001389

NNT : 2013MON20067
tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389
https://tel.archives-ouvertes.fr/tel-01001389/document
https://tel.archives-ouvertes.fr/tel-01001389/file/36072_BALLAS_2013_archivage-1_cor.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : The relationship between deformation and so-called fluid paleotransfers in minor faults has been analysed in an argillaceous formation located in the Causses Basin in France. The fluid paleotransfers are related to the fault activity to a large extent. We attempt to estimate the intensity of paleo-deviatoric stress magnitudes under which the fault activity may have occurred and consequently, the change in the structural fault permeability. The paleo-deviatoric stress magnitudes were calculated with the inverse method of Etchecopar applied to calcite twinning. The measured crystals are contained within the core zone of minor faults and this study is based on a previous complete microtectonic and microstructural analysis of the faults. In this paper, analysis of calcite twinning has been applied for the first time to vein fillings associated small faults in a context of relatively weak deformation, a condition ensured by the tectonic and structural analysis. Calculation and discussion of the paleo-deviatoric stress tensors in relation to the evolution of the structural fault permeability and to the hydraulic behaviour of the faults are the aim of this paper. The analysed faults, created and active during the same tectonic event, were permeable under a (;σ;1;–;σ;3;) mean value of 40–50 MPa. On the other hand, the reactivation of faults during a second tectonic event implies mean (;σ;1;–;σ;3;) value higher than 40–50 MPa, especially for the faults that are poorly oriented with respect to the principal tectonic stress directions. The core zone of these faults remained sealed and impermeable or became permeable by development of microcracks inside the pre-existing fillings.
ISSN: 0040-1951

hal-00407577
https://hal.archives-ouvertes.fr/hal-00407577
DOI : 10.1016/j.tecto.2006.09.014

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A CO2-rich brine core-flood experiment in calcite limestone for conditions representative of underground storage (P = 12 MPa and T = 100°C) was performed in order to explore the dissolution mechanisms arising at moderate CO2 partial pressure (0.3 MPa). An increase of the total porosity (φT) accompanied by a persistent permeability (k) decrease was measured. The mechanisms controlling this atypical anticorrelated k − φT relationship were investigated from the analysis of high-resolution X-ray microtomography images of the sample acquired before and after the experiment. All the evidences converge to the conclusion that the ubiquitous decrease of permeability measured during the 44 h of dissolution is due to the clogging of a fraction of the macroporosity by microporous material triggered by the rearrangement of the detached undissolved particles. This mechanism results in the development of low permeability zones bridging the macroporosity.
ISSN: 0094-8276

hal-00903585
https://hal.archives-ouvertes.fr/hal-00903585
DOI : 10.1002/grl.50595

Éditeur(s) : HAL CCSD Elsevier
Résumé : Deficient sealing in the well cement plugs and annulus due to mechanical fracturing is an important risk of CO2 leakage from the reservoir to others permeable layers and the surface. Such situation was reproduced at laboratory scale in order to determine the hydro-chemical control on the fracture permeability. Specifically, we investigated the effect of CO2 rich-brine flowing through fractured Portland cements at T = 60 °C and P = 10 MPa and variable flow rates. We showed that carbonation process is dominant and induces permeability decrease and leakage mitigation for extremely low flow rate whereas for high flow rate injection the permeability remains constant due to the precipitation of a low density secondary Si-rich phase which maintains the initial fracture aperture. At intermediate flow rate the hydraulic aperture can increase due to the densification of the material triggered by the net precipitation of low porosity calcite. These results emphasize that more complex behaviors than those considered from batch experiments may take place in the vicinity of flowing fractures. Specifically, the redissolution of the neoformed calcite as well as the development of amorphous phases, both controlled by the CO2-rich brine renewing rate in the fracture may prevent the healing fracture.
ISSN: 1750-5836

hal-00857555
https://hal.archives-ouvertes.fr/hal-00857555
DOI : 10.1016/j.ijggc.2013.04.002

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
The dissolution of carbonate rocks usually leads to both porosity (ϕ) and permeability (k) increase. We present experimental evidences and physical-based models of positive and anti-correlated dynamics of k and ϕ observed during dissolution experiments of carbonate rocks. We study the way the rate of change of ϕ and k is controlled by the degree of undersaturation of the percolating solution for two different types of carbonate rocks. We document the occurrence of an anti-correlated k−ϕ trend when the flowing fluid (deionized water) has a weak capacity of dissolution. A positive correlation is found when CO2 is added to the deionized water to increase the potential dissolution rate. Detailed analyses of the microstructures of the rock performed by X-ray microtomography reveal that low dissolution rate favors detachment of solid particles and their subsequent accumulation at the pore-throat inlet. Particles are detached from the rock matrix due to the differential dissolution rate of the indurated grains and the microporous cement. We then propose a simple phenomenological model to interpret the effect of the pore-throat clogging by the accumulation of partially dissolved carbonate particles. We conjecture that permeability is controlled by the decrease of the effective hydraulic radius and the increase of the tortuosity due to partial and localized obstruction of the pore network. Conversely, increasing the level of undersaturation of the flowing solution leads to an augmented potential of dissolving most of the transported particles before they reach the throats. In this case, both k and ϕ increase and display power-law correlations.
ISSN: 0169-3913

hal-01174145
https://hal.archives-ouvertes.fr/hal-01174145
DOI : 10.1007/s11242-015-0456-2

Éditeur(s) : HAL CCSD
Résumé : Fault zones are major discontinuities in sedimentary basins. Understanding their role on fluid migrations is an essential issue to (i) characterize the mechanisms and kinematics of deformation and (ii) to determine the parameters which control the distribution of energetic or mineral resources. This work applies to faulting under a temperature range of 200-250°C, corresponding to that of deeply buried reservoirs as well as potentially seismogenic fault zones. The studied faults are normal faults affecting the “Grès d’Annot” Formation, a Priabonian-Rupelian siliclastic turbidite succession of the Alpine foreland basin. They are located in two distinct areas: the Moutière-Restefond area in the eastern part of the basin and the Estrop area in the western part. Vitrinite reflectance outside fault zones indicates maximal temperatures of 240-260°C at Moutière-Restefond and 170-200°C at Estrop, i.e. burial depths around 8 km and 6 km, respectively, assuming a mean geothermal gradient of 30°C/km. Burial was due to underthrusting below the Embrunais-Ubaye Alpine nappes, the difference in burial between the two areas traducing the westward taper of the nappe front.The studied faults affect alternating arkosic sandstone beds and pelite layers with offsets from centimeters to decameters. Two types of core zones are recognized: (1) the foliated core zones of the Moutière-Restefond area, where deformation dominated by pressure solution and synkinematic phyllosilicate neoformation resulted in a foliated fabric, and (2) the core zones of the Estrop area, characterized by dilatant quartz-mineralized veins and breccia. Fault and host rock petrophysical properties were measured on drill plugs, using the water porosity technique and nitrogen permeability technique under 2 Mpa of confining pressure. In the Moutière-Restefond fault zones, plug axes were oriented in three orthogonal directions corresponding to the main deformation axes (X, Y, Z) of the foliated arkose to characterize the effect of structural anisotropy. In the Estrop fault zones, where deformation does not show equivalent anisotropy, the plug axes were oriented according to the main fault plane orientation (i.e., parallel to azimuth, parallel to dip and normal). In each fault zone, the porosity of fault rocks is equivalent to that of host rocks. In the Moutière-Restefond fault zones, the plugs parallel to the X and Z axes of deformation have a permeability similar to that of the host rocks, whereas permeability parallel to the Y axis (i.e. parallel to the foliation and the main fault plane) is one order of magnitude higher. By contrast, the permeability values in the Estrop fault zones are isotropic and equivalent to the host rock values. This study highlights the importance of various types of deformation mechanisms and related fluid-rock interactions in determining different fault rock types within a similar protolith, ultimately controlling distinct petrophysical properties of fault zones.
Les zones de failles constituent des discontinuités majeures dans la croûte supérieure. Ce mémoire s’intéresse aux failles actives à des profondeurs de 5-8 km, i.e. dans des conditions pouvant jouer un rôle important (i) sur le comportement mécanique de de la croûte, en particulier sur son potentiel sismogénique et (ii) sur la compartimentation des réservoirs géologiques profondément enfouis.Les failles étudiées sont des failles normales (rejet jusqu’à 50 mètres) affectant des alternances de bancs de grès arkosiques et de pélites dans les Grès d’Annot, une formation turbiditique d’âge priabonien-rupélien du bassin d’avant-chaine alpin. Les Grès d’Annot ont été enfouis sous les nappes de l’Embrunais-Ubaye peu de temps après leur dépôt et exhumés au Miocène moyen-supérieur. L’étude a été réalisée dans deux secteurs des Alpes de Haute-Provence, (1) le secteur de l’Estrop (chaine des Trois Evéchés, dans la partie occidentale du bassin) et (2) le secteur de Point Vert-Restefond (alentours du col de la Bonette, dans la partie orientale du bassin). La réflectance de la vitrinite dans les Grès d’Annot indique des températures maximales de 160-190°C dans le secteur (1) et de 240-260 °C dans le secteur (2) , soit des profondeurs d’enfouissement de 5-6 km et 8-10 km, respectivement, dans l’hypothèse d’un gradient géothermique moyen de 25-30°C/km. A partir des observations microstructurales, de données d’inclusions de fluides, de modélisations thermodynamiques sur chlorites syncinématiques et des indices de cristallinité de l’illite, on a établi que les failles du secteur (1) ont fonctionné à une température d’environ 200°C pour une pression de 0.6Kbar et celles du secteur (2) dans une gamme de température de 200-220°C et de pression comprise entre 0.6 et 1.1 Kba. L’activité de la faille de Point-Vert a été datée par la méthode 40Ar/39Ar au Miocène inférieur (21 Ma). Ces failles sont interprétées comme associées aux premiers stades du soulèvement résultant de l’activité des chevauchements dans le socle sous-jacent.Deux types principaux de roches de failles caractérisent les failles étudiées. Les brèches dilatantes sont majoritaires dans les zones de failles du secteur (1) alors que les arkoses foliées sont majoritaires dans les zones de failles du secteur (2). Les brèches dilatantes témoignent de mécanismes de déformation dominés par la fracturation transgranulaire et la pression-solution des silicates. Ce dernier mécanisme se manifeste principalement par d’abondantes précipitations cycliques de quartz, les stylolites restant peu développés. Les géométries structurales sont associées à l’activation de plans T de Riedel déterminant l’ouverture de relais extensifs et un régime localement dilatant. Nous associons ce type de roche de faille à une faible pression effective au cours de la déformation.La déformation cisaillante exprimée dans les arkoses foliées témoigne de mécanismes de déformation dominés par (i) la fracturation intragranulaire et transgranulaire, (ii) la pressionsolution/ précipitation des silicates, principalement le quartz, (iii) la néoformation de micas blancs liée à l’altération des feldspaths et (iv) la précipitation de chlorite. Ce travail montre également que les transformations minéralogiques liées aux interactions fluide-roche dans la zone de faille (forte augmentation de la proportion des phyllosilicates au dépend des feldspaths) changent radicalementla composition minéralogique de la roche. Nous associons ce type de roche de faille à une forte pression effective au cours de la déformation.La pétrophysique montre que les brèches de failles (secteur 1) ont une perméabilité isotrope et équivalente à celle du protolithe (10-3mD sous 2 MPa de confinement) tandis que les roches foliées (secteur 2) montrent une augmentation de perméabilité (10-2mD) selon l’axe Y de la déformation, d’un ordre de grandeur supérieure aux perméabilités suivant les axes X et Z et dans la roche hôte (10-3mD). Ce drain préférentiel potentiel est associé à l’orientation des phyllosilicates dans la foliation.
https://hal.archives-ouvertes.fr/tel-01310382

tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382/document
https://hal.archives-ouvertes.fr/tel-01310382/file/Th%C3%A8seCAVAILHES2012.pdf