Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Despite many studies, our understanding of silica precipitation from natural waters remains limited, in particular for geothermal waters. Here we present a detailed study on the kinetics of silica polymerization as a function of fluid temperature and pH using high-temperature (250-260 °C) seawater-derived geothermal fluids as those discharged from the Bouillante geothermal site.We monitored the on-site decrease in monomeric silica concentration(initial SiO2 concentration of about 600 mg/l)with time using the molybdenum blue spectrophotometric method on samples of separated water collected from the high-pressure separator at 167 °C and cooled to 25, 50, 75, and 90 °C and for pH values ranging from 5 to 8. During all these experiments, only silica polymerization was observed, with the formation of colloidal particles in suspension in the solutions. No scaling of amorphous silica was formed. The collected data were after modeled in order to determine the useful kinetic parameters for predicting and preventing amorphous silica precipitation in the production wells during fluid exploitation in the specific context of Bouillante. Results under the investigated experimental conditions show that the kinetics of silica precipitation is affected more strongly by pH than by temperature change. The reaction in the acidic Bouillante solution begins with a transition period that significantly decreases the kinetics of silica polymerization. Modeling the experimental data indicates that the silica polymerization up to the state of equilibrium is characterized by a 2nd-order kinetic law relative to dissolved silica; this could indicate that the polymerization is controlled mainly by the formation of dimers. However, the first hour of the experiments is better characterized by a 4th-order kinetic law, suggesting more complex polymerization reactions in the initial stage with the formation of nanocolloidal particles containing 3 to 4 monomers. In both cases, the corresponding kinetics rate constant k is linearly dependent on pH for pH between 5 and 7. The activation energy Ea for the overall reaction, calculated using the Arrhenius equation under the considered pH and temperature conditions, ranges between 41±9.8 and 54±9.6 kJ/mol. To complete this work, the colloid particles formed at the end of the kinetics experiments were extracted and analyzed by SEM and TEM microscopy, X-ray Diffraction and the BET method. Results show that the size of the colloids increase and their specific surface decrease with increasing pH and are thus dependent on pH. Globally, our work provides a reliable database for understanding silica polymerization kinetics in natural geothermal brines or geologic waters characterized by a near neutral pH and moderate dissolved silica concentrations.
ISSN: 0009-2541

hal-01403092
https://hal-brgm.archives-ouvertes.fr/hal-01403092
DOI : 10.1016/j.chemgeo.2016.08.031

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Purpose The objective of this article was to estimate the social cost of respiratory cancer cases attributable to occupational risk factors in France in 2010. Methods According to the attributable fraction method and based on available epidemiological data from the lit- erature, we estimated the number of respiratory cancer cases due to each identified risk factor. We used the cost- of-illness method with a prevalence-based approach. We took into account the direct and indirect costs. We estimated the cost of production losses due to morbidity (absenteeism and presenteeism) and mortality costs (years of production losses) in the market and nonmarket spheres. Results The social cost of lung, larynx, sinonasal and mesothelioma cancer caused by exposure to asbestos, chromium, diesel engine exhaust, paint, crystalline silica, wood and leather dust in France in 2010 were estimated at between 917 and 2,181 million euros. Between 795 and 2,011 million euros (87-92 %) of total costs were due to lung cancer alone. Asbestos was by far the risk factor representing the greatest cost to French society in 2010 at between 531 and 1,538 million euros (58-71 %), ahead of diesel engine exhaust, representing an estimated social cost of between 233 and 336 million euros, and crystalline silica (119-229 million euros). Indirect costs represented about 66 % of total costs. Conclusion Our assessment shows the magnitude of the economic impact of occupational respiratory cancers. It allows comparisons between countries and provides valu- able information for policy-makers responsible for defining public health priorities.
ISSN: 1618-7598

halshs-00922838
https://halshs.archives-ouvertes.fr/halshs-00922838
DOI : 10.1007/s10198-013-0528-6
PUBMED : 23974964

Éditeur(s) : HAL CCSD MDPI AG, Basel, Switzerland
Résumé : International audience
Abstract View references (46)This work shows the preparation of silica membranes by a two-step sol-gel method using tetraethyl orthosilicate in ethanolic solution by employing nitric acid and ammonia as co-catalysts. The sols prepared in pH 6 resulted in the lowest concentration of silanol (Si-OH) species to improve hydrostability and the optimized conditions for film coating. The membrane was tested to desalinate 0.3-15 wt % synthetic sodium chloride (NaCl) solutions at a feed temperature of 22 °C followed by long term membrane performance of up to 250 h in 3.5 wt % NaCl solution. Results show that the water flux (and salt rejection) decrease with increasing salt concentration delivering an average value of 9.5 kg m-2 h-1 (99.6%) and 1.55 kg m-2 h-1 (89.2%) from the 0.3 and 15 wt % saline feed solutions, respectively. Furthermore, the permeate salt concentration was measured to be less than 600 ppm for testing conditions up to 5 wt % saline feed solutions, achieving below the recommended standard for potable water. Long term stability shows that the membrane performance in water flux was stable for up to 150 h, and slightly reduced from thereon, possibly due to the blockage of large hydrated ions in the micropore constrictions of the silica matrix. However, the integrity of the silica matrix was not affected by the long term testing as excellent salt rejection of >99% was maintained for over 250 h. © 2013 by the authors; licensee MDPI, Basel, Switzerland.
ISSN: 2077-0375

hal-01683203
https://hal.univ-antilles.fr/hal-01683203
DOI : 10.3390/membranes3030136

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Talc is a hydrous magnesium rich layered silicate that is widely disseminated in the Earth from the seafloor to over 100 km depth, in ultra-high pressure metamorphism of oceanic crust. In this paper we determine the single crystal elastic constants at pressures from 0 to 12 GPa of talc triclinic (C 1¯) and monoclinic (C2/c) polytypes using ab initio methods. We find that talc has an extraordinarily high elastic anisotropy at zero pressure that reduces with increasing pressure. The exceptional anisotropy is complemented by a negative Poisson's ratio for many directions in crystal space. Calculations show that talc is not only one of very few common minerals to exhibit auxetic behaviour, but the magnitude of this effect may be the largest reported so far for a mineral. The compression (Vp) and shear (Vs) wave velocity anisotropy is 80% and 85% for the triclinic polytype. At pressures where talc is known be stable in the Earth (up to 5 GPa) the Vp and Vs anisotropy is reduced to about 40% for both velocities, which is still a very high value. Vp is slow parallel to the c-axis and fast perpendicular to it. This remains unchanged with increasing pressure and is observed in both polytypes. The shear wave splitting (difference between fast and slow S-wave velocities) at low pressure has high values in the plane normal to the c-axis, with a maximum near the alow asterisk-axis in the triclinic and the b-axis in the monoclinic polytype. The c-axis is the direction of minimum splitting. The pattern of shear wave splitting does not change significantly with pressure. The volume fraction of talc varies between 11 and 41% for hydrated mantle rocks, but the lack of data on the crystallographic preferred orientation (CPO) precludes a detailed analysis of the impact of talc on seismic anisotropy in subduction zones. However, it is highly likely that CPO can easily develop in zones of deformation due to the platy habit of talc crystals. For random aggregates of talc, the isotropic Vp, Vs and Vp/Vs ratio have significantly lower values than those of antigorite and may explain low-velocity regions in the mantle wedge. Vp/Vs ratios are more complex in anisotropic media because there are fast and slow S-waves, resulting in Vp/Vs1 and Vp/Vs2 ratios for every propagation direction, making interpretation difficult in deformed polycrystalline talc with a CPO. Talc on the subduction plate boundary can strongly influence guided wave velocity as CPO would develop in this region of intense shearing. The very low coefficient of friction (< 0.1) of talc above 100 °C could also explain silent earthquakes at shallow depths (ca 30 km) along the subduction plate boundaries, frequently responsible for tsunami.
ISSN: 0012-821X

hal-00411481
https://hal.archives-ouvertes.fr/hal-00411481
DOI : 10.1016/j.epsl.2008.07.047

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Carbonised template silica membranes were synthesised and investigated for water desalination for brackish (0.3wt%), sea water (3.5wt%) and brine (7.5wt%) NaCl solutions at temperatures range from 22 to 60°C. The membranes were prepared by a two-step base catalysed sol-gel method using tetraethyl orthosilicate TEOS as the silica precursor and triblock copolymer of Pluronic® P123 as the templating agent. The P123 silica membranes calcined under vacuum only produced high quality membranes by the interlayer-free method. The membranes were stable during testing of up to 250h under different thermal and salt concentration solutions, always delivering very high salt rejections >99.5%. It was found that by increasing the template concentration in the silica matrix from 5 to 50wt%, salt concentration polarisation was greatly reduced. As such, high water fluxes were measured up to 8.5kgm-2h-1 for brackish water and 6.6kgm-2h-1 for brine water. © 2014 Elsevier B.V.
ISSN: 0376-7388

hal-01683210
https://hal.univ-antilles.fr/hal-01683210
DOI : 10.1016/j.memsci.2014.10.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The origin of plate tectonics is one of the most fundamental issues in earth and planetary sciences. Laboratory experiments indicate that the viscosity of silicate rocks is so strongly temperature-dependent that the entire surface of the Earth should be one immobile rigid plate. The rheology of oceanic lithosphere is, however, still poorly understood, and there exist few constraints on the temperature dependency of viscosity on the field scale. Here we report a new kind of observational constraint based on the geoid along oceanic fracture zones. We identify a large number of conspicuous small-scale geoid anomalies, which cannot be explained by the standard evolution model of oceanic lithosphere, and estimate their source density perturbations using a new Bayesian inversion method. Our results suggest that they are caused most likely by small-scale convection involving temperature perturbations of ∼300 K±100 K∼300 K±100 K. Such thermal contrast requires the activation energy of mantle viscosity to be as low as View the MathML source100±50 kJmol−1 in case of diffusion creep, and View the MathML source225±112 kJmol−1 in case of dislocation creep, substantially reducing the thickness of the stiffest part of oceanic lithosphere. Oceanic lithosphere may thus be broken and bent much more easily than previously thought, facilitating the operation of plate tectonics.
ISSN: 0012-821X

hal-01467827
https://hal.archives-ouvertes.fr/hal-01467827
DOI : 10.1016/j.epsl.2016.05.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : The dense hydrous magnesium silicate called the D phase is the most likely candidate to recycle hydrogen into the lower mantle in subduction zones. As seismology represents the preferred method to detect this mineral in subduction zones, the single crystal elastic tensor has been calculated using first principle methods. A triple cell (View the MathML source) was used to account for an ordered ideal composition of the D phase to lower mantle pressures. The elastic tensor of the mineral at ambient conditions is predicted to be C11 = 387.7, C33 = 287.7, C44 = 100.4, C12 = 108.0, C13 = 51.1, C14 = − 14.6 in GPa with bulk modulus at zero pressure Ko = 163 GPa and a statistical error of about 4.0 GPa for all constants. The pressure derivatives of the elastic constants have been determined to pressure of 80 GPa. Our tensor correctly predicts the published experimental measurements of linear compressibility along the a- and c-axes, the logarithmic pressure derivative of the c/a axial ratio and bulk modulus at zero pressure. It contradicts the experimentally measured elastic tensor reported by (Liu, L.-G., Okamoto, K., Yang, Y.-J., Chen, C.-C., Lin, C.-C., 2004. Elasticity of single-crystal phase D (a dense hydrous magnesium silicate) by Brillouin spectroscopy. Solid State Commun. 132, 517–520), which fails to reproduce the experimental compressibility data. Using the elastic constants and density predicted to 85 GPa, the seismic anisotropy of P- and S-waves has been calculated as a function of pressure. The single crystal has high P-wave velocities and shear wave splitting in the basal plane below 20 GPa. At high pressures, the maximum P-wave velocities have threefold symmetry normal to a-axes in the basal plane, whereas the maximum shear wave splitting is parallel to a-axes with twofold symmetry. The D phase has high Vp and Vs anisotropy at ambient pressure, 17.6% for Vp and 19.9% for Vs. The Vp anisotropy decreases with increasing pressure to about 30 GPa, while it remains constant at 8% from 30 to 85 GPa. The Vs anisotropy decreases to 17% at 20 GPa and then increases to 22% at 85 GPa. The isotropic velocity ratios of S to P (Rs/p), bulk sound to S (Rphi/s) and density to S (Rρ/s) are calculated as a function of pressure. The Rs/p shows very little variation with pressure with low value of 0.6, whereas both Rphi/s and Rρ/s increase with pressure to peak values of 2.8 and 2.0 respectively at about 60 GPa. The presence of the D phase in subducted horizontal ‘stagnant' plates in the circum Pacific could contribute to a number of seismic observations, such as the observed velocity heterogeneity at depths between 500 and 1000 km and the fast S-waves travelling horizontally with horizontal polarization in this depth range. Further the lower density of the D phase compared with anhydrous minerals could influence buoyancy of the hydrated ‘stagnant' slabs. The transformation of the D phase to perovskite plus ferripericlase during thermal annealing may be responsible for horizontal slab seismogenesis.
ISSN: 0012-821X

hal-00406379
https://hal.archives-ouvertes.fr/hal-00406379
DOI : 10.1016/j.epsl.2007.04.053

Éditeur(s) : HAL CCSD American Society for Biochemistry and Molecular Biology
Résumé : International audience
Background: We used evolutionary analysis of alkaline phosphatase (tissue nonspecific alkaline phosphatase, TNSALP) to predict missense mutations leading to hypophosphatasia. Results: We found 469 sensitive positions and validated 99% of the 204 known mutations. Conclusion: It is a more powerful method than in silico models to validate missense mutations in TNSALP. Significance: Such an approach should be widely used to support genetic diagnostics. ALPL encodes the tissue nonspecific alkaline phosphatase (TNSALP), which removes phosphate groups from various substrates. Its function is essential for bone and tooth mineralization. In humans, ALPL mutations lead to hypophosphatasia, a genetic disorder characterized by defective bone and/or tooth mineralization. To date, 275 ALPL mutations have been reported to cause hypophosphatasia, of which 204 were simple missense mutations. Molecular evolutionary analysis has proved to be an efficient method to highlight residues important for the protein function and to predict or validate sensitive positions for genetic disease. Here we analyzed 58 mammalian TNSALP to identify amino acids unchanged, or only substituted by residues sharing similar properties, through 220 millions years of mammalian evolution. We found 469 sensitive positions of the 524 residues of human TNSALP, which indicates a highly constrained protein. Any substitution occurring at one of these positions is predicted to lead to hypophosphatasia. We tested the 204 missense mutations resulting in hypophosphatasia against our predictive chart, and validated 99% of them. Most sensitive positions were located in functionally important regions of TNSALP (active site, homodimeric interface, crown domain, calcium site, ...). However, some important positions are located in regions, the structure and/or biological function of which are still unknown. Our chart of sensitive positions in human TNSALP (i) enables to validate or invalidate at low cost any ALPL mutation, which would be suspected to be responsible for hypophosphatasia, by contrast with time consuming and expensive functional tests, and (ii) displays higher predictive power than in silico models of prediction.
ISSN: 0021-9258

hal-01545479
https://hal.archives-ouvertes.fr/hal-01545479
DOI : 10.1074/jbc.M114.576843

Éditeur(s) : HAL CCSD
Résumé : International audience
Symbiosis is a widespread phenomenon in the biosphere. In marine benthic environments breakdown of symbiosis is responsible for coral bleaching and dramatically affects coral reef ecosystems functioning [1]. In the water column, planktonic organisms are key component of pelagic ecosystems and a number of species form mutualistic association with microalgae forming a photosymbiosis [2]. Here we intended to investigate the genetic basis of photosymbiosis, through a transcriptomic approach on marine plankton organisms. We focused more specifically on associations occurring between radiolarian host (protist, zooplankton) and dinoflagellates symbiont (protist, phytoplankton) living inside the host cell. It has recently been highlighted that these holobionts are widespread in oligotrophic open oceans and there are also evidences of their fundamental implication in biogeochemical carbon, silica and strontium cycles [3, 4, 5, 6]. RNA-seq technologies allow obtaining an unprecedented amount of data for unicellular organisms isolated from the environment [7]. The study of such non-model holobionts datasets requires de novo assembly, which implies considerable computational resources and the potential production of chimeric sequences [8, 9].We therefore developed an original strategy aiming at accelerating and improving de novo assembly for holobiont datasets. We chose SIMKA [10] a fast kmer-based method initially developed to estimate the similarity between numerous metagenomic datasets, and which has been recently adapted to extract their common sequences. As our symbionts are identified, we used SIMKA to compare our holobionts transcriptomes to publicly available dinoflagellates transcriptomes [11] generating two datasets, one composed of reads from the symbionts and another with reads from the host (for which no reference data are currently available). Independent assemblies were then performed in parallel, accelerating the study process, and minimizing the proportion of resulting chimeric sequences. Our strategy produced a unique and comprehensive genomic dataset for Radiolaria [12, 13], and offers a pragmatic, large scale, comparison strategy to assemble and study holobionts [9]. Our new sequences obtained from holobionts study will be used for phylogenomics investigation, as reference for environmental metagenomic studies and ultimately to understand and characterize the molecular basis of symbiotic relationships in the plankton.Bibliografic references :[1] Simon K. Davy, Denis Allemand, and Virginia M. Weis. “Cell Biology of Cnidarian-Dinoflagellate Symbiosis”. In: Microbiology and Molecular Biology Reviews 76.2 (June 1, 2012), pp. 229–261. issn: 1092-2172, 1098- 5557. doi: 10.1128/MMBR.05014-11.[2] Janouškovec, J. et al. “Major transitions in dinoflagellate evolution unveiled by phylotranscriptomics”. in: PNAS 201614842 (2016). doi:10.1073/pnas.1614842114[3] Tristan Biard et al. “In situ imaging reveals the biomass of giant protists in the global ocean”. In: Nature advance online publication (Apr. 20, 2016). issn: 0028-0836. doi: 10.1038/nature17652.[4] Lionel Guidi et al. “Plankton networks driving carbon export in the olig- otrophic ocean”. In: Nature 532.7600 (Apr. 28, 2016), pp. 465–470. issn: 0028-0836. doi: 10.1038/nature16942.[5] Diane K. Stoecker et al. “Acquired phototrophy in aquatic protists”. In: Aquatic Microbial Ecology 57.3 (Nov. 24, 2009), pp. 279–310. doi: 10.3354/ame01340.[6] Johan Decelle et al. “An original mode of symbiosis in open ocean plankton”. In: Proceedings of the National Academy of Sciences 109.44 (Oct. 30, 2012), pp. 18000–18005. issn: 0027-8424, 1091-6490. doi: 10. 1073/pnas.1212303109.[7] Sergio Balzano et al. “Transcriptome analyses to investigate symbiotic relationships between marine protists”. In: Frontiers in Microbiology 6 (Mar. 17, 2015). issn: 1664-302X. doi: 10.3389/fmicb.2015.00098.[8] Li, B. et al. “Evaluation of de novo transcriptome assemblies from RNA-Seq data”. In: Genome Biology 15, 553 (2014).[9] Sangwan, N., Xia, F. & Gilbert, J. A. “Recovering complete and draft population genomes from metagenome datasets”. In: Microbiome 4, 8 (2016).[10] Gaëtan Benoit et al. “Multiple comparative metagenomics using mul- tiset k -mer counting”. In: PeerJ Computer Science 2 (Nov. 14, 2016). doi: 10.7717/peerj-cs.94.[11] Patrick J. Keeling et al. “The Marine Microbial Eukaryote Transcriptome Sequencing Project (MMETSP): Illuminating the Functional Diversity of Eukaryotic Life in the Oceans through Transcriptome Sequencing”. In: PLOS Biol 12.6 (June 2014), e1001889. issn: 1545-7885. doi: 10.1371/journal.pbio.1001889.[12] Burki, F. et al. “Evolution of Rhizaria: new insights from phylogenomic analysis of uncultured protists”. In BMC Evolutionary Biology 10, 377 (2010).
International Conference on Holobionts
Paris, France

hal-01575069
https://hal.inria.fr/hal-01575069

Éditeur(s) : HAL CCSD MDPI
Résumé : International audience
Intestinal absorption and brain permeation constitute key parameters of toxicokinetics for pesticides, conditioning their toxicity, including neurotoxicity. However, they remain poorly characterized in humans. The present study was therefore designed to evaluate human intestine and brain permeation for a large set of pesticides (n = 338) belonging to various chemical classes, using an in silico graphical BOILED-Egg/SwissADME online method based on lipophilicity and polarity that was initially developed for drugs. A high percentage of the pesticides (81.4%) was predicted to exhibit high intestinal absorption, with a high accuracy (96%), whereas a lower, but substantial, percentage (38.5%) displayed brain permeation. Among the pesticide classes, organochlorines (n = 30) constitute the class with the lowest percentage of intestine-permeant members (40%), whereas that of the organophosphorus compounds (n = 99) has the lowest percentage of brain-permeant chemicals (9%). The predictions of the permeations for the pesticides were additionally shown to be significantly associated with various molecular descriptors well-known to discriminate between permeant and non-permeant drugs. Overall, our in silico data suggest that human exposure to pesticides through the oral way is likely to result in an intake of these dietary contaminants for most of them and brain permeation for some of them, thus supporting the idea that they have toxic effects on human health, including neurotoxic effects.
ISSN: 1660-4601

hal-01560242
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01560242
PUBMED : 28665355
DOI : 10.3390/ijerph14070708

Éditeur(s) : HAL CCSD SAGE Publications (UK and US)
Résumé : International audience
Molecular evolutionary analysis is an efficient method to predict and/or validate amino acid substitutions that could lead to a genetic disease and to highlight residues and motifs that could play an important role in the protein structure and/or function. We have applied such analysis to amelotin (AMTN), a recently identified enamel protein in the rat, mouse, and humans. An in silico search for AMTN provided 42 new mammalian sequences that were added to the 3 published sequences with which we performed the analysis using a dataset representative of all lineages (circa 220 million years of evolution), including 2 enamel-less species, sloth and armadillo. During evolution, of the 209 residues of human AMTN, 17 were unchanged and 34 had conserved their chemical properties. Substituting these important residues could lead to amelogenesis imperfecta (AI). Also, AMTN possesses a well-conserved signal peptide, 2 conserved motifs whose function is certainly important but unknown, and a putative phosphorylation site (SXE). In addition, the sequences of the 2 enamel-less species display mutations revealing that AMTN underwent pseudogenization, which suggests that AMTN is an enamel-specific protein.
ISSN: 0022-0345

hal-01545488
https://hal.archives-ouvertes.fr/hal-01545488
DOI : 10.1177/0022034512460551

Éditeur(s) : HAL CCSD
Résumé : International audience
Objective: To estimate the social cost of respiratory cancers attributable to occupational risk factors in France in 2010. Methods: We estimated the number of cases ofrespiratory cancers attributable to each identified occupational risk factor according to the attributable fractions method. We also estimated direct (costs of hospital stays, drugs, outpatient care) and indirect costs (production losses) related to morbidity (absenteeism and presenteeism) and mortality (years of lost production). Production losses for paid work and unpaid domestic activities were taken into account. Results: The social cost of respiratory cancers (lung, larynx, sinonasal, pleural mesothelioma) attributable to exposure to asbestos, chromium, diesel engine exhaust, polycyclic aromatic hydrocarbons, painting occupations (unidentified carcinogen), crystalline silica, wood and leather dust in France in 2010 was estimated to be between 960 and 1,866 million. The cost of lung cancer represents between 804 and 1,617 million. The three risk factors with the greatest impact are asbestos ((sic)530 to 890 million), diesel engine exhaust ((sic)227 to 394 million), and crystalline silica ( 116 to 268 million). Conclusion: These results provide a conservative estimate of the public health and economic burden of respiratory cancers attributable to occupational risk factors from a societal perspective.
ISSN: 0995-3914

hal-01659246
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01659246
DOI : 10.3917/spub.174.0509
PUBMED : 29034666

Résumé : Tahiti’s pearl farming industry plays a major socio-economic role in French Polynesia. In an increasingly competitive market where the production of high quality pearls becomes essential, research can help secure and ensure sustainable production. In that context, Ifremer, in close collaboration with the “direction des resources marines” (French Polynesian government agency) has developed research projects on the “sustainable development of pearl farming”. This program is organized along 3 axes: (1) understanding the animal physiology and initiating a genetically selective breeding program of donor oysters; (2) understanding pearl oyster larvae dispersal and recruitment; (3) understanding the molecular mechanisms underlying biomineralization processes during shell and pearl formation. It is in this frame that we have developed a highthroughput Expressed Sequence Tags pyrosequencing program on the calcifying mantle, combined with proteomic analyses of the shell and pearl. We analyzed 276738 EST sequences, leading to the constitution of a P. margaritifera mantle transcripts catalogue of 82 sequences potentially involved in biomineralization. Our results provided direct evidence that our ESTs data set covers a large number of the matrix proteins of P. margaritifera. In addition, our proteomic analysis enabled us to retrieve, in silico, all the sequences from P. margaritifera involved in the biomineralization process already published on databases. Integration of these two methods allowed, for the first time, the global composition of calcifying tissue and calcified structures to be examined in tandem.
Recent Advances in Pearl Research—Proceedings of the International Symposium on Pearl Research 2011.Edited by Shugo Watabe, Kaoru Maeyama and Hiromichi Nagasawa. 2013. ISBN : 978-4-88704-158-5. pp.184-194

Droits : 2013 TERRAPUB. All rights reserved.
http://archimer.ifremer.fr/doc/00167/27840/26049.pdf
http://archimer.ifremer.fr/doc/00167/27840/

Éditeur(s) : HAL CCSD
Résumé : Fault zones are major discontinuities in sedimentary basins. Understanding their role on fluid migrations is an essential issue to (i) characterize the mechanisms and kinematics of deformation and (ii) to determine the parameters which control the distribution of energetic or mineral resources. This work applies to faulting under a temperature range of 200-250°C, corresponding to that of deeply buried reservoirs as well as potentially seismogenic fault zones. The studied faults are normal faults affecting the “Grès d’Annot” Formation, a Priabonian-Rupelian siliclastic turbidite succession of the Alpine foreland basin. They are located in two distinct areas: the Moutière-Restefond area in the eastern part of the basin and the Estrop area in the western part. Vitrinite reflectance outside fault zones indicates maximal temperatures of 240-260°C at Moutière-Restefond and 170-200°C at Estrop, i.e. burial depths around 8 km and 6 km, respectively, assuming a mean geothermal gradient of 30°C/km. Burial was due to underthrusting below the Embrunais-Ubaye Alpine nappes, the difference in burial between the two areas traducing the westward taper of the nappe front.The studied faults affect alternating arkosic sandstone beds and pelite layers with offsets from centimeters to decameters. Two types of core zones are recognized: (1) the foliated core zones of the Moutière-Restefond area, where deformation dominated by pressure solution and synkinematic phyllosilicate neoformation resulted in a foliated fabric, and (2) the core zones of the Estrop area, characterized by dilatant quartz-mineralized veins and breccia. Fault and host rock petrophysical properties were measured on drill plugs, using the water porosity technique and nitrogen permeability technique under 2 Mpa of confining pressure. In the Moutière-Restefond fault zones, plug axes were oriented in three orthogonal directions corresponding to the main deformation axes (X, Y, Z) of the foliated arkose to characterize the effect of structural anisotropy. In the Estrop fault zones, where deformation does not show equivalent anisotropy, the plug axes were oriented according to the main fault plane orientation (i.e., parallel to azimuth, parallel to dip and normal). In each fault zone, the porosity of fault rocks is equivalent to that of host rocks. In the Moutière-Restefond fault zones, the plugs parallel to the X and Z axes of deformation have a permeability similar to that of the host rocks, whereas permeability parallel to the Y axis (i.e. parallel to the foliation and the main fault plane) is one order of magnitude higher. By contrast, the permeability values in the Estrop fault zones are isotropic and equivalent to the host rock values. This study highlights the importance of various types of deformation mechanisms and related fluid-rock interactions in determining different fault rock types within a similar protolith, ultimately controlling distinct petrophysical properties of fault zones.
Les zones de failles constituent des discontinuités majeures dans la croûte supérieure. Ce mémoire s’intéresse aux failles actives à des profondeurs de 5-8 km, i.e. dans des conditions pouvant jouer un rôle important (i) sur le comportement mécanique de de la croûte, en particulier sur son potentiel sismogénique et (ii) sur la compartimentation des réservoirs géologiques profondément enfouis.Les failles étudiées sont des failles normales (rejet jusqu’à 50 mètres) affectant des alternances de bancs de grès arkosiques et de pélites dans les Grès d’Annot, une formation turbiditique d’âge priabonien-rupélien du bassin d’avant-chaine alpin. Les Grès d’Annot ont été enfouis sous les nappes de l’Embrunais-Ubaye peu de temps après leur dépôt et exhumés au Miocène moyen-supérieur. L’étude a été réalisée dans deux secteurs des Alpes de Haute-Provence, (1) le secteur de l’Estrop (chaine des Trois Evéchés, dans la partie occidentale du bassin) et (2) le secteur de Point Vert-Restefond (alentours du col de la Bonette, dans la partie orientale du bassin). La réflectance de la vitrinite dans les Grès d’Annot indique des températures maximales de 160-190°C dans le secteur (1) et de 240-260 °C dans le secteur (2) , soit des profondeurs d’enfouissement de 5-6 km et 8-10 km, respectivement, dans l’hypothèse d’un gradient géothermique moyen de 25-30°C/km. A partir des observations microstructurales, de données d’inclusions de fluides, de modélisations thermodynamiques sur chlorites syncinématiques et des indices de cristallinité de l’illite, on a établi que les failles du secteur (1) ont fonctionné à une température d’environ 200°C pour une pression de 0.6Kbar et celles du secteur (2) dans une gamme de température de 200-220°C et de pression comprise entre 0.6 et 1.1 Kba. L’activité de la faille de Point-Vert a été datée par la méthode 40Ar/39Ar au Miocène inférieur (21 Ma). Ces failles sont interprétées comme associées aux premiers stades du soulèvement résultant de l’activité des chevauchements dans le socle sous-jacent.Deux types principaux de roches de failles caractérisent les failles étudiées. Les brèches dilatantes sont majoritaires dans les zones de failles du secteur (1) alors que les arkoses foliées sont majoritaires dans les zones de failles du secteur (2). Les brèches dilatantes témoignent de mécanismes de déformation dominés par la fracturation transgranulaire et la pression-solution des silicates. Ce dernier mécanisme se manifeste principalement par d’abondantes précipitations cycliques de quartz, les stylolites restant peu développés. Les géométries structurales sont associées à l’activation de plans T de Riedel déterminant l’ouverture de relais extensifs et un régime localement dilatant. Nous associons ce type de roche de faille à une faible pression effective au cours de la déformation.La déformation cisaillante exprimée dans les arkoses foliées témoigne de mécanismes de déformation dominés par (i) la fracturation intragranulaire et transgranulaire, (ii) la pressionsolution/ précipitation des silicates, principalement le quartz, (iii) la néoformation de micas blancs liée à l’altération des feldspaths et (iv) la précipitation de chlorite. Ce travail montre également que les transformations minéralogiques liées aux interactions fluide-roche dans la zone de faille (forte augmentation de la proportion des phyllosilicates au dépend des feldspaths) changent radicalementla composition minéralogique de la roche. Nous associons ce type de roche de faille à une forte pression effective au cours de la déformation.La pétrophysique montre que les brèches de failles (secteur 1) ont une perméabilité isotrope et équivalente à celle du protolithe (10-3mD sous 2 MPa de confinement) tandis que les roches foliées (secteur 2) montrent une augmentation de perméabilité (10-2mD) selon l’axe Y de la déformation, d’un ordre de grandeur supérieure aux perméabilités suivant les axes X et Z et dans la roche hôte (10-3mD). Ce drain préférentiel potentiel est associé à l’orientation des phyllosilicates dans la foliation.
https://hal.archives-ouvertes.fr/tel-01310382

tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382/document
https://hal.archives-ouvertes.fr/tel-01310382/file/Th%C3%A8seCAVAILHES2012.pdf

Éditeur(s) : HAL CCSD RSC Publishing
Résumé : International audience
Abstract View references (36)The size or alkyl chain length of cationic surfactants can be used to tailor both the pore morphology and the functionality or oxidation state of cobalt in silica materials. This work shows for the first time that these two mechanisms are interconnected. Cobalt oxide silica materials, with the same cobalt loading (Co:Si = 1:4), were prepared using an acid catalysed sol-gel method where the cobalt/surfactant ratio was systematically varied. The alkyl chain length of the cationic surfactant was also varied from 2 to 12 by using tetraethyl (C2-AB) ammonium bromide, and triethyl hexyl (C6-AB) and dodecyl trimethyl (C12-AB) ammonium bromides as the templating agents. Initial addition of C2-AB, C6-AB or C12-AB enhanced the oxidation of cobalt to cobalt (ii,iii) oxide in the xerogels. However, as more surfactant is added the enhancement effect is reversed and the cobalt (ii,iii) oxide content of the sample begins to decline. The point at which this transition occurs is a function of the alkyl chain length of the surfactant, with a longer chain indicating an earlier transition. Pore morphology was influenced in a similar fashion with the longer alkyl chain C12-AB surfactant undergoing an earlier transition (i.e. at lower concentrations) towards mesoporosity, than either of the smaller C2-AB and C6-AB surfactants. In both mechanisms it was the increased propensity of the C12-AB surfactant to aggregate (given its larger size and lower solubility) that was the controlling factor. This journal is © the Partner Organisations 2014.
EISSN: 2046-2069

hal-01683205
https://hal.univ-antilles.fr/hal-01683205
DOI : 10.1039/c4ra05934d

Éditeur(s) : HAL CCSD Society of Exploration Geophysicists
Résumé : Read More: http://library.seg.org/doi/10.1190/geo2015-0411.1
International audience
Understanding the role of the unsaturated zone in aquifer recharge and contaminant attenuation processes is a major challenge for the protection and management of karstic water resources. We present the potential of the magnetic resonance soundings (MRS) geophysical method for characterizing the vadose zone of karst aquifers composed of epikarst and infiltration layers. To investigate the hydraulic functioning of the Durzon karst system located on the Larzac plateau (southern France), we used the MRS method at 16 sites. The MRS results have been compared with available geologic information and to core water content measurements. The remarkable spatial variability of the MRS response observed in the study area makes it possible to determine ranges of water storage properties in relation to the lithology of the investigated carbonate formations (dolomite, marly, and siliceous limestone). All soundings found either constant or increasing MRS water content with depth, which demonstrates that the infiltration zone might be the major water storage entity for permanent water storage, with important consequences for recharge quality and quantity. These results show the feasibility and potential of the MRS method for the characterization of the karst unsaturated zone and for understanding the vertical distribution of water content, which impacts the overall functioning of karst systems.Read More: http://library.seg.org/doi/10.1190/geo2015-0411.1
ISSN: 0016-8033

hal-01412654
https://hal.archives-ouvertes.fr/hal-01412654
https://hal.archives-ouvertes.fr/hal-01412654/document
https://hal.archives-ouvertes.fr/hal-01412654/file/mazilli2016.pdf
DOI : 10.1190/GEO2015-0411.1

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : The seismology is the most effective method to explore the Structure of subduction zones to great depth. The distinguishing feature of the mantle in the subduction regions is the presence of hydrated phases, which transport water into the Earth's interior and release it with dramatic local consequences, triggering earthquakes and melting. The seismological detection of these hydrous phases and geo-dynamic interpretation of flow in the hydrous mantle depend on knowledge of the anisotropic elastic properties and the characteristics of the wave propagation in anisotropic media. In this paper we briefly recall the distinguishing features of anisotropic wave propagation and the observable parameters. We suggest the Vp/Vs ratio is a physically sound parameter than can be observed by seismology in anisotropic regions of the Earth, whereas the Poisson's ratio, which is often quoted, is not directly observable and does not correspond to the characteristics of wave propagation in an anisotropic or isotropic medium. We report for the first time the ratios of Vp/Vs1 and Vp/Vs2, where Vs1 is the fastest and Vs2 slowest S-wave velocities of an anisotropic media. We present the current knowledge of the anisotropic seismic properties of hydrous minerals in the upper mantle, transition zone, and lower mantle that are stable along low temperature geotherms associated with subduction, and identify which minerals are likely to influence seismological observations because they have very high volume fractions, or very high anisotropies, or both of these.;In the upper mantle antigorite and talc are exceptionally anisotropic (Vp 71% Vs 68% and Vp 65%, Vs 68%, respectively) and chlorite is also very anisotropic for S-waves (Vp 35%, Vs 76%). Comparatively less anisotropic are hornblende (Vp 27%, Vs 31%), used as proxy for tremolite in subduction zones, and clinohumite (21.8%, Vs 15.9%). Brucite at 4 GPa (Vp 26.5%, Vs 30.9%) and the dense hydrogen magnesium silicate (DHMS) phase A at 9GPa (Vp 9.3%, Vs 17.6%) are the only hydrous minerals stable in the upper mantle that have had their elastic properties measured at in situ mantle pressures. Except for the phase A, all these minerals are more anisotropic than olivine for at least one parameter (Vp, Vs, Vp/Vs1, or Vp/Vs2). In the transition zone the major phases hydrous wadsleyite and ringwoodite C have moderate to weak anisotropies (Vp 16.3%, Vs 16.5%, and Vp 1.9%, Vs 4.4%, respectively). The DHMS Superhydrous B has a moderate anisotropy (Vp 6.9%, Vs 11.6%). At greater depth the DHMS phase D Lit 24 GPa (Vp 10.8%, Vs 18.0%) is the only hydrous phase that can transport hydrogen from the transition zone into the lower mantle. The phase D is more anisotropic for S than P waves like many of the hydrous phases. From these data it is clear that hydrous phases are in general very anisotropic. However, pressure can play a strong role in reducing anisotropy. It is the case for brucite and talc, in which increasing pressure from ambient to 4 GPa reduces the anisotropy by about 50% for both P and S waves. In contrast, the anisotropy of the DHMS phase A does not change significantly with pressure.;Our picture of the seismic anisotropy of hydrated minerals remains incomplete; the elastic properties of many have not been measured even at ambient conditions (e.g., 10 angstrom phase and phase E) or not measured in their true elastic symmetry (e.g., clinochlore). The majority of hydrous minerals have not been measured at high pressure. and none related to hydrated mantle have been measured at elevated temperature. We have shown in the few cases where hydrous minerals have been measured as a function of pressure, that this variable has an important effect oil the velocity distribution and in most cases reduces the degree of anisotropy, hence we Would expect seismic anisotropy to play a key role in the determination of the shallow structure of subduction zones in the upper mantle.
Subduction zone geodynamics

hal-00420893
https://hal.archives-ouvertes.fr/hal-00420893

Éditeur(s) : HAL CCSD
Résumé : International audience
OBJECTIVES: To detect new hazards ("signals"), occupational health monitoring systems mostly rest on the description of exposures in the jobs held and on reports by medical doctors; these are subject to declarative bias. Our study aims to assess whether job-exposure matrices (JEMs) could be useful tools for signal detection by improving exposure reporting. METHODS: Using the French national occupational disease surveillance and prevention network (RNV3P) data from 2001 to 2011, we explored the associations between disease and exposure prevalence for 3 well-known pathology/exposure couples and for one debatable couple. We compared the associations measured when using physicians' reports or applying the JEMs, respectively, for these selected diseases and across non-selected RNV3P population or for cases with musculoskeletal disorders, used as two reference groups; the ratio of exposure prevalences according to the two sources of information were computed for each disease category. RESULTS: Our population contained 58,188 subjects referred with pathologies related to work. Mean age at diagnosis was 45.8 years (95% CI 45.7; 45.9), and 57.2% were men. For experts, exposure ratios increase with knowledge on exposure causality. As expected, JEMs retrieved more exposed cases than experts (exposure ratios between 12 and 194), except for the couple silica/silicosis, but not for the MSD control group (ratio between 0.2 and 0.8). CONCLUSIONS: JEMs enhanced the number of exposures possibly linked with some conditions, compared to experts' assessment, relative to the whole database or to a reference group; they are less likely to suffer from declarative bias than reports by occupational health professionals.
International Archives of Occupational and Environmental Health

hal-01560279
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01560279
DOI : 10.1007/s00420-017-1215-1
PUBMED : 28299449

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Background: Researchers sorely need markers and approaches for biodiversity exploration (both specimen linked and metagenomics) using the full potential of next generation sequencing technologies (NGST). Currently, most studies rely on expensive multiple tagging, PCR primer universality and/or the use of few markers, sometimes with insufficient variability. Methodology/Principal Findings: We propose a novel approach for the isolation and sequencing of a universal, useful and popular marker across distant, non-model metazoans: the complete mitochondrial genome. It relies on the properties of metazoan mitogenomes for enrichment, on careful choice of the organisms to multiplex, as well as on the wide collection of accumulated mitochondrial reference datasets for post-sequencing sorting and identification instead of individual tagging. Multiple divergent organisms can be sequenced simultaneously, and their complete mitogenome obtained at a very low cost. We provide in silico testing of dataset assembly for a selected set of example datasets. Conclusions/Significance: This approach generates large mitogenome datasets. These sequences are useful for phylogenetics, molecular identification and molecular ecology studies, and are compatible with all existing projects or available datasets based on mitochondrial sequences, such as the Barcode of Life project. Our method can yield sequences both from identified samples and metagenomic samples. The use of the same datasets for both kinds of studies makes for a powerful approach, especially since the datasets have a high variability even at species level, and would be a useful complement to the less variable 18S rDNA currently prevailing in metagenomic studies.
ISSN: 1932-6203

hal-01544766
https://hal.archives-ouvertes.fr/hal-01544766
DOI : 10.1371/journal.pone.0051263