Éditeur(s) : HAL CCSD Landes Bioscience
Résumé : International audience
In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
Autophagy

hal-00735751
https://hal.archives-ouvertes.fr/hal-00735751
PUBMED : 22966490

Éditeur(s) : HAL CCSD MDPI AG, Basel, Switzerland
Résumé : International audience
Abstract View references (46)This work shows the preparation of silica membranes by a two-step sol-gel method using tetraethyl orthosilicate in ethanolic solution by employing nitric acid and ammonia as co-catalysts. The sols prepared in pH 6 resulted in the lowest concentration of silanol (Si-OH) species to improve hydrostability and the optimized conditions for film coating. The membrane was tested to desalinate 0.3-15 wt % synthetic sodium chloride (NaCl) solutions at a feed temperature of 22 °C followed by long term membrane performance of up to 250 h in 3.5 wt % NaCl solution. Results show that the water flux (and salt rejection) decrease with increasing salt concentration delivering an average value of 9.5 kg m-2 h-1 (99.6%) and 1.55 kg m-2 h-1 (89.2%) from the 0.3 and 15 wt % saline feed solutions, respectively. Furthermore, the permeate salt concentration was measured to be less than 600 ppm for testing conditions up to 5 wt % saline feed solutions, achieving below the recommended standard for potable water. Long term stability shows that the membrane performance in water flux was stable for up to 150 h, and slightly reduced from thereon, possibly due to the blockage of large hydrated ions in the micropore constrictions of the silica matrix. However, the integrity of the silica matrix was not affected by the long term testing as excellent salt rejection of >99% was maintained for over 250 h. © 2013 by the authors; licensee MDPI, Basel, Switzerland.
ISSN: 2077-0375

hal-01683203
https://hal.univ-antilles.fr/hal-01683203
DOI : 10.3390/membranes3030136

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : While Amazonian forests are extraordinarily diverse, the abundance of trees is skewed strongly towards relatively few 'hyperdominant' species. In addition to their diversity, Amazonian trees are a key component of the global carbon cycle, assimilating and storing more carbon than any other ecosystem on Earth. Here we ask, using a unique data set of 530 forest plots, if the functions of storing and producing woody carbon are concentrated in a small number of tree species, whether the most abundant species also dominate carbon cycling, and whether dominant species are characterized by specific functional traits. We find that dominance of forest function is even more concentrated in a few species than is dominance of tree abundance, with only ≈1% of Amazon tree species responsible for 50% of carbon storage and productivity. Although those species that contribute most to biomass and productivity are often abundant, species maximum size is also influential, while the identity and ranking of dominant species varies by function and by region.
ISSN: 2041-1723

hal-01204225
https://hal.archives-ouvertes.fr/hal-01204225
DOI : 10.1038/ncomms7857
PRODINRA : 305614
PUBMED : 25919449

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Upon subduction, the oceanic crust transforms to blueschists and eclogites, with seismic properties that gradually become similar to those of the surrounding mantle. In order to evaluate the anisotropy of blueschists and glaucophane-bearing eclogites, the elastic constants of glaucophane single-crystal plates from the Sesia-Lanzo Zone (Aosta Valley, Western Alps) were measured using Brillouin spectroscopy at ambient conditions. The mean P- and S-wave velocities are 7.8 and 4.6 km s−1 respectively, and the anisotropy is high (38.1% (AVP) and 27.3% (AVS)). Glaucophane develops strong LPO, characterized by the [001]-axes concentrated sub-parallel to the lineation, and the {110} poles concentrated sub-perpendicular to the foliation in both blueschist and eclogite rocks. The measured LPO is in good agreement with viscoplastic selfconsistent numerical models. Seismic properties of glaucophane-bearing blueschist and eclogite are calculated by combining measured LPO and the single-crystal elastic moduli of glaucophane with the other main mineral constituents of the rock: mostly epidote for blueschist, and omphacite and garnet for eclogite. Blueschists present stronger anisotropies (AVP=16.1% and AVS=10.3%) than eclogites (AVP=2.9% and AVS=1.7%). The shear-wave splitting and resulting delay times for a 7-km thick layer of eclogite or blueschist are low for the eclogite (b0.03 s), but signi!cant for blueschist (0.16 s). Application to the subducted oceanic crust yields a decrease of velocity contrast with the surrounding mantle and of anisotropy at depth depending on the temperature of the slab. The details of the velocity variations in subducted oceanic crust are dif!cult to reconcile with the blueschist-eclogite transition as probed by exhumed metamorphic rocks and may require additional phases such as lawsonite or chemical variations such as oxidation state.
ISSN: 0040-1951

hal-00564518
https://hal.archives-ouvertes.fr/hal-00564518
DOI : 10.1016/j.tecto.2010.09.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The modern high topography of the Tianshan resulted from the reactivation of a Paleozoic orogenic belt by the India/Asia collision. Today, the range exhibits tectonically active forelands and intermontane basins. Based on quantitative morphotectonic observations and age constraints derived from cosmogenic 10Be dating, single-grain post-infrared infrared stimulated luminescence (p-IR IRSL) dating and modeling of fault scarp degradation, we quantify the deformation in the Nalati and Bayanbulak intermontane basins in the central Eastern Tianshan. Our results indicate that at least 1.4 mm/yr of horizontal crustal shortening is accommodated within these two basins. This shortening represents over 15% of the 8.5 ± 0.5 mm/yr total shortening rate across the entire range at this longitude. This shortening rate implies that the Eastern Central Tianshan is thickening at a mean rate of ∼1.4 mm/yr, a rate that is significantly higher than the average denudation rate of 0.14 mm/yr derived from our cosmogenic analysis. This discrepancy suggests that the Tianshan range has not yet reached a steady-state topography and remains in a transient state of topographic growth, most likely due to limited denudation rates driven by the arid climate of Central Asia.
ISSN: 0012-821X

insu-01610154
https://hal-insu.archives-ouvertes.fr/insu-01610154
DOI : 10.1016/j.epsl.2017.09.025

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This work shows the preparation and separation performance assessment of carbon membranes derived from phenolic resin by a vacuum-assisted method and carbonisation in an inert atmosphere. The vacuum time played an important role in tailoring the structure of the membranes. For instance, pore volumes and surface areas increased from 0.81 and 834 to 2.2 cm3g−1and 1910 m2g−1, respectively, as the vacuum time exposure increased from 0 to 1200 s. The significant structural changes correlated very well with water permeation, as fluxes increased by 91% as the vacuum time increased from 0 to 1200 s reaching up to 169 L m−2h−1at 5 bar. Molecular weight cut-off tests showed no rejection for the smaller glucose and sucrose molecules, though this increased to ~ 80% and full rejection for 36 kDa and 400 kDa polyvinyl pyrrolidine. Interestingly, FTIR spectra showed that the peaks of C–H stretching vibration (2800–3200 cm−1) and C–O stretching (1030 cm−1) became more pronounced as a function of increasing vacuum time, strongly suggesting that the use of vacuum further assisted in the polycondensation of phenolic oligomers. Based on these outcomes, a cluster to cluster model is proposed, whereby vacuum application promoted crosslinking reactions of the phenolic resin, creating microporous regions within the clusters, and mesoporous regions between the clusters. © 2016 Elsevier B.V
ISSN: 0376-7388

hal-01683220
https://hal.univ-antilles.fr/hal-01683220
DOI : 10.1016/j.memsci.2016.11.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Carbonised template silica membranes were synthesised and investigated for water desalination for brackish (0.3wt%), sea water (3.5wt%) and brine (7.5wt%) NaCl solutions at temperatures range from 22 to 60°C. The membranes were prepared by a two-step base catalysed sol-gel method using tetraethyl orthosilicate TEOS as the silica precursor and triblock copolymer of Pluronic® P123 as the templating agent. The P123 silica membranes calcined under vacuum only produced high quality membranes by the interlayer-free method. The membranes were stable during testing of up to 250h under different thermal and salt concentration solutions, always delivering very high salt rejections >99.5%. It was found that by increasing the template concentration in the silica matrix from 5 to 50wt%, salt concentration polarisation was greatly reduced. As such, high water fluxes were measured up to 8.5kgm-2h-1 for brackish water and 6.6kgm-2h-1 for brine water. © 2014 Elsevier B.V.
ISSN: 0376-7388

hal-01683210
https://hal.univ-antilles.fr/hal-01683210
DOI : 10.1016/j.memsci.2014.10.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mesoporous cobalt oxide silica matrices and membranes were successfully prepared using a dual acid-base catalysed sol-gel and interlayer-free approach for desalination applications. The effects of cobalt addition (0-35 mol%) on the structure-property relationship of the silica materials and membrane performance were systematically studied as a function of feed salt concentration (0.3-7.5 wt.% NaCl) and temperature (22-60 °C). As cobalt concentration increases beyond 5 mol%, the concentration of tricobalt tetroxide and proportion of silica mesopores were found to increase within the matrices. Silica membranes with high amount of tricobalt tetroxide (35 mol%) were found to be highly mesoporous with water fluxes of 20, 11.3 and 7.7 kg m-2 h-1 for the 0.3, 3.5 and 7.5 wt.% solutions at 60 °C, respectively, with >99.7% salt rejection at all times. This is attributed to the high pore volume (mesopores formation) and structural robustness of the silica network provided by the presence of tricobalt tetroxide. Even higher performance was achieved for low tricobalt tetroxide (mol%) silica membranes with water fluxes of 47.6 (0.3 wt.%) and 31.5 (3.5 wt.%) kg m-2 h-1 at 60 °C, respectively, though with reduced salt rejections of 90%. © 2015 Elsevier B.V.
ISSN: 0011-9164

hal-01683209
https://hal.univ-antilles.fr/hal-01683209
DOI : 10.1016/j.desal.2015.02.034

Éditeur(s) : HAL CCSD Oxford University Press
Résumé : International audience
The BioMart Community Portal (www.biomart.org) is a community-driven effort to provide a unified interface to biomedical databases that are distributed worldwide. The portal provides access to numerous database projects supported by 30 scientific organizations. It includes over 800 different biological datasets spanning genomics, proteomics, model organisms, cancer data, ontology information and more. All resources available through the portal are independently administered and funded by their host organizations. The BioMart data federation technology provides a unified interface to all the available data. The latest version of the portal comes with many new databases that have been created by our ever-growing community. It also comes with better support and extensibility for data analysis and visualization tools. A new addition to our toolbox, the enrichment analysis tool is now accessible through graphical and web service interface. The BioMart community portal averages over one million requests per day. Building on this level of service and the wealth of information that has become available, the BioMart Community Portal has introduced a new, more scalable and cheaper alternative to the large data stores maintained by specialized organizations.
ISSN: 0305-1048

hal-01146849
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01146849
DOI : 10.1093/nar/gkv350
PUBMED : 25897122

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present an integrated study of geochemistry, petrofabrics and seismic properties of strongly sheared eclogites from the Chinese Continental Scientific Drilling (CCSD) project in the Sulu ultrahigh-pressure (UHP) metamorphic terrane, eastern China. First, geochemical data characterize diverse protoliths of the studied eclogites. The positive Eu- and Sr-anomalies, negative Nb anomaly and flat portion of heavy rare earth elements in coarse-grained rutile eclogites (samples B270 and B295) suggest a cumulate origin in the continental crust, whereas the negative Nb anomaly and enrichment of light rare earth elements in retrograde eclogites (samples B504, B15 and B19) imply an origin of continental basalts or island arc basalts. Second, P-wave velocities (V-p) of three typical eclogite samples were measured under confining pressures up to 500 MPa and temperatures to 700 degrees C. At 500 MPa and room temperature, the mean V-p reaches 8.50-8.53 km/s in samples B270 and B295 but drops to 7.86 km/s in sample B504, and the P-wave anisotropy changes from 1.7-2.7% to 5.5%, respectively. The pressure and temperature derivatives of V-p are larger in the retrograde eclogite than in fresh ones. Third, the electron backscatter diffraction (EBSD) measurements of the eclogites reveal random crystal preferred orientation (CPO) of garnet and pronounced CPO of omphacite, which is characterized by a strong concentration of [001]-axes sub-parallel to the lineation and of (010)-poles perpendicular to the foliation. The asymmetric CPO of omphacite in sample B270 recorded a top-to-the-south shear event during subduction of the Yangtze plate. The calculated fastest V-p is generally sub-parallel to the lineation, but a different deformation environment during exhumation could form second-order variations in omphacite CPO and affect the V-p distribution in eclogites (e.g., the fastest V-p is at similar to 35 degrees from the foliation in sample 13295). Comparison between measured and calculated seismic properties indicates that the CPO of omphacite controls the seismic anisotropy of eclogites at high pressure, and compositional layering and retrograde minerals will increase the anisotropy. Calculated P-wave velocities agree well with velocities measured at 500 MPa and room temperature for fresh eclogites, but much higher than those of retrograde eclogite. As a case study, the laboratory-derived V-p-P and V-p-T relationships were used to estimate P-wave velocities of eclogites and peridotites beneath the Western Superior Province, Canada. The results indicate that besides the fabric-induced anisotropy, the direction dependence of pressure and temperature derivatives of V-p can significantly increase seismic anisotropy of eclogites with depth, which results in eclogites being an important candidate for the seismic anisotropy in the upper mantle. Due to their very high density and velocity, garnet-rich eclogites within peridotite could be detected in seismic reflections in subduction zones.
ISSN: 0040-1951

hal-00463512
https://hal.archives-ouvertes.fr/hal-00463512
DOI : 10.1016/j.tecto.2008.09.027

Éditeur(s) : HAL CCSD MDPI
Résumé : International audience
This work investigates the structural formation and analyses of titania membranes (TM) prepared using different vacuum exposure times for molecular weight (MW) cut-off performance and oil/water separation. Titania membranes were synthesized via a sol-gel method and coated on macroporous alumina tubes followed by exposure to a vacuum between 30 and 1200 s and then calcined at 400 °C. X-ray diffraction and nitrogen adsorption analyses showed that the crystallite size and particle size of titania increased as a function of vacuum time. All the TM membranes were mesoporous with an average pore diameter of ~3.6 nm with an anatase crystal morphology. Water, glucose, sucrose, and polyvinylpyrrolidone with 40 and 360 kDa (PVP-40 kDa and PVP-360 kDa) were used as feed solutions for MW cut-off and hexadecane solution for oil filtration investigation. The TM membranes were not able to separate glucose and sucrose, thus indicating the membrane pore sizes are larger than the kinetic diameter of sucrose of 0.9 nm, irrespective of vacuum exposure time. They also showed only moderate rejection (20%) of the smaller PVP-40 kDa, however, all the membranes were able to obtain an excellent rejection of near 100% for the larger PVP-360 kDa molecule. Furthermore, the TM membranes were tested for the separation of oil emulsions with a high concentration of oil (3000 ppm), reaching high oil rejections of more than 90% of oil. In general, the water fluxes increased with the vacuum exposure time indicating a pore structural tailoring effect. It is therefore proposed that a mechanism of pore size tailoring was formed by an interconnected network of Ti-O-Ti nanoparticles with inter-particle voids, which increased as TiO2 nanoparticle size increased as a function of vacuum exposure time, and thus reduced the water transport resistance through the TM membranes. © 2016 by the authors.
ISSN: 1996-1944

hal-01683214
https://hal.univ-antilles.fr/hal-01683214
DOI : 10.3390/ma9110938

Éditeur(s) : HAL CCSD MDPI
Résumé : International audience
AbstractThis review provides a global overview of microporous silica based membranes for desalination via pervaporation with a focus on membrane synthesis and processing, transport mechanisms and current state of the art membrane performance. Most importantly, the recent development and novel concepts for improving the hydro-stability and separating performance of silica membranes for desalination are critically examined. Research into silica based membranes for desalination has focussed on three primary methods for improving the hydro-stability. These include incorporating carbon templates into the microporous silica both as surfactants and hybrid organic-inorganic structures and incorporation of metal oxide nanoparticles into the silica matrix. The literature examined identified that only metal oxide silica membranes have demonstrated high salt rejections under a variety of feed concentrations, reasonable fluxes and unaltered performance over long-term operation. As this is an embryonic field of research several target areas for researchers were discussed including further improvement of the membrane materials, but also regarding the necessity of integrating waste or solar heat sources into the final process design to ensure cost competitiveness with conventional reverse osmosis processes. © 2012 by the authors.
ISSN: 2073-4441

hal-01683200
https://hal.univ-antilles.fr/hal-01683200
DOI : 10.3390/w4030629