Éditeur(s) : DAC : Direction des affaires culturelles de Guyane
Extrait de : Journées de l'archéologie en Guyane 2020. "Actualités des découvertes en Guyane", le 5 décembre 2020. Université de Guyane
Siècle(s) traité(s) : 20
Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V21008
V21008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Laboratory models have been conducted to improve our understanding of the role that the resistance of the slab to bending and its coupling to the ambient mantle play in subduction dynamics over geological time scales. Our models are set up with a viscous plate of silicone (lithosphere) subducting under negative buoyancy in a viscous layer of glucose syrup (mantle). For our study, the lithosphere/upper mantle viscosity contrast has been systematically varied, from similar to 10 to similar to 10(5) in order to explore the parameter space between weak and strong slab dynamics. We found that subduction is characterized by a retreating mode for viscosity ratios > 10(4), by the coexistence of a retreating mode and an advancing mode for viscosity ratios between similar to 10(4) and similar to 10(2), and quasi-stationary, Rayleigh-Taylor like behaviour for ratios < 10(2). By combining our experimental results and kinematic data from current subduction zones in four reference frames which differ in the amount of net rotation, we infer that a lithosphere/upper mantle viscosity contrast of 150-500 is necessary to obtain realistic trench/subducting plate velocity ratios as well as the variability of subduction styles observed in nature.
ISSN: 0012-821X

hal-00412008
https://hal.archives-ouvertes.fr/hal-00412008
DOI : 10.1016/j.epsl.2008.04.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Although subducting slabs undergo a bending deformation that resists tectonic plate motions, the magnitude of this resistance is not known because of poor constraints on slab strength. However, because slab bending slows the relatively rapid motions of oceanic plates, observed plate motions constrain the importance of bending. We estimated the slab pull force and the bending resistance globally for 207 subduction zone transects using new measurements of the bending curvature determined from slab seismicity. Predicting plate motions Using a global mantle flow model, we constrain the viscosity of the bending slab to be at most similar to 300 times more viscous than the upper mantle: stronger slabs are intolerably slowed by the bending deformation. Weaker slabs, however, cannot transmit a pull force sufficient to explain rapid trenchward plate motions unless slabs stretch faster than seismically observed rates of similar to 10(-15) s(-1). The constrained bending viscosity (similar to 2 x 10(23) Pa s) is larger than previous estimates that yielded similar or larger bending resistance (here similar to 25% of forces). This apparent discrepancy occurs because slabs bend more gently than previously thought, with an average radius of curvature of 390 km that permits subduction Of Strong slabs. This gentle bending may ultimately permit plate tectonics on Earth.
ISSN: 0012-821X

hal-00412383
https://hal.archives-ouvertes.fr/hal-00412383
DOI : 10.1016/j.epsl.2008.05.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : The motion of oceanic plates is commonly related to the subduction of cold and dense oceanic material into the mantle. These models predict plate velocities from subduction velocities but the trench motion is not directly included in the computation. Here, using a recent compilation of a global data set, we found that the motion of trenches (either advancing or retreating with respect to upper plates) scales with their corresponding subducting plates motion. Based on simple experimental tests, we found that subduction of strong slabs inside the upper mantle correctly predicts these kinematic relationships. We deduce that the motion of the trenches represent the surface manifestation of the resistance encountered by the subducting lithosphere to bend and penetrate within the upper mantle.
ISSN: 0012-821X

hal-00407200
https://hal.archives-ouvertes.fr/hal-00407200
DOI : 10.1016/j.epsl.2007.02.016

Éditeur(s) : HAL CCSD
Résumé : The DRADEM campaign was performed from July 9th to 21th 2016 on board the Pourquoi Pas?, in the Exclusive Economic Zones of Suriname and French Guyana. This campaign belongs to a program dedicated to geological investigations of the Demerara plateau, following the GUYAPLAC (2003) and IGUANES (2013) campaigns, and before the MARGATS campaign (2016). The aims of the DRADEM campaign were to map the continental slope of the transform margin north of the Demerara plateau, and to dredge the rocks outcropping in the slope.We completed the bathymetric mapping of the continental slope, including part of the edged of the Demerara plateau. These new bathymetric data confirm the segmentation of the transform margin in three parts with very different morphologies. In addition, two circular structures were interpreted as mud volcanoes, one on the northern edge of the plateau, the other one in the distal part of the Orinoco deep sea fan.Twelve dredges were performed between 4700 and 3500 m depths. Four from these twelve did not recovered rocks. The eight others brought back variables amounts of rocks, often encrusted, but of various natures: sediments (breccia, coarse sandstones, sandstones with plants debris, sandstones with shells, clayey ooze), micro-granular rocks and metamorphic rocks (including mylonite). The nature of the rocks was determined from macroscopic observation of the rocks, which are currently altered. Of course, these determinations need to be validated and specified by onshore further studies. Anyway, most of these rocks were previously unknown in this area, and they will strongly influence our understanding of the structure and evolution of this margin. They evidence huge vertical displacements that brought back to the surface some of these rocks that formed in a deep setting.
https://hal.archives-ouvertes.fr/hal-01418244

Droits : http://creativecommons.org/licenses/by-nc/
hal-01418244
https://hal.archives-ouvertes.fr/hal-01418244
https://hal.archives-ouvertes.fr/hal-01418244/document
https://hal.archives-ouvertes.fr/hal-01418244/file/DRADEM-Campaign%20Report.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Giant earthquake (moment magnitude M-w >= 8.5) forecasts for subduction zones have been empirically related to both tectonic stresses and geometrical irregularities along the subduction interface. Both of these controls have been suggested as able to tune the ability of rupture to propagate laterally and, in turn, exert an important control on giant earthquake generation. Here we test these hypotheses, and their combined influence, by compiling a dataset of trench fill thickness (a proxy for smoothing of subducting plate relief by sediment input into the subduction channel) and upper plate strain (a proxy for the tectonic stresses applied to the subduction interface) for 44 segments of the global subduction network. We statistically compare relationships between upper plate strain, trench sediment thickness and maximal earthquake magnitude. We find that the combination of both large trench fill (>= 1 km) and neutral upper plate strain explains spatial patterns of giant earthquake occurrence to a statistically significant degree. In fact, the concert of these two factors is more highly correlated with giant earthquake occurrence than either factor on its own. Less frequent giant earthquakes of lower magnitude are also possible at subduction zones with thinner trench fill and compressive upper plate strain. Extensional upper plate strain and trench fill < 0.5 km appear to be unfavorable conditions, as giant earthquakes have not been observed in these geodynamical environments during the last 111 years. Citation: Heuret, A., C. P. Conrad, F. Funiciello, S. Lallemand, and L. Sandri (2012), Relation between subduction megathrust earthquakes, trench sediment thickness and upper plate strain, Geophys. Res. Lett., 39, L05304, doi: 10.1029/2011GL050712.
ISSN: 0094-8276

hal-00745636
https://hal.archives-ouvertes.fr/hal-00745636
https://hal.archives-ouvertes.fr/hal-00745636/document
https://hal.archives-ouvertes.fr/hal-00745636/file/heuretGRL2012.pdf
DOI : 10.1029/2011GL050712

Éditeur(s) : HAL CCSD
Résumé : La campagne DRADEM s’est déroulée du 9 au 21 Juillet 2016 à bord du Pourquoi Pas ?, dans les zones économique exclusives du Suriname et de la Guyane. Cette campagne s’inscrit dans un programme d’étude géologique du plateau de Demerara, dans la suite des campagnes GUYAPLAC (2003), IGUANES (2013), et avant MARGATS (2016). Les objectifs de la campagne DRADEM étaient de cartographier la pente continentale de la marge transformante bordant au Nord le Plateau de Demerara, et d’échantillonner par dragage les roches qui y affleurent.La bathymétrie de la totalité de la pente continentale et une partie de la bordure du plateau ont été cartographiées, confirmant la segmentation de cette marge en trois parties avec des caractéristiques morphologiques très différentes. Deux probables volcans de boue ont été identifiés, l’un sur la bordure nord du plateau, l’autre dans la partie distale du cône sous-marin de l’Orénoque.Douze dragages ont été réalisés entre 4700 et 3500 m de profondeur. Quatre dragues n’ont pas remonté d’échantillons. Les huit autres ont remonté des quantités variables de roches, très souvent encroûtées, mais à chaque fois de natures différentes : sédiments (brèche, grès grossiers, grès à plantes, grès coquillers, marne calcaire), roches grenues et métamorphiques (dont mylonites). Les déterminations lithologiques sont basées sur l’observation macroscopique de roches souvent altérées, et restent bien sûr à confirmer par les études à terre ; mais dans tous les cas ces roches pour la plupart inconnues dans ce secteur vont radicalement modifier notre compréhension de la structure et de l’évolution de cette marge. Elles mettent en évidence des mouvements verticaux importants qui ont ramené à l’affleurement des roches formées en profondeur.
https://hal.archives-ouvertes.fr/hal-01418119

Droits : http://creativecommons.org/licenses/by-nc/
hal-01418119
https://hal.archives-ouvertes.fr/hal-01418119
https://hal.archives-ouvertes.fr/hal-01418119/document
https://hal.archives-ouvertes.fr/hal-01418119/file/DRADEM-Rapport%20de%20campagne.pdf
https://hal.archives-ouvertes.fr/hal-01418119/file/DRADEM-Campaign%20Report.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Past studies have shown that high coastal uplift rates are restricted to active areas, especially in a subduction context. The origin of coastal uplift in subduction zones, however, has not yet been globally investigated. Quaternary shorelines correlated to the last interglacial maximum (MIS 5e) were defined as a global tectonic benchmark (Pedoja et al. (2011)). In order to investigate the relationships between the vertical motion and the subduction dynamic parameters, we cross-linked this coastal uplift database with the "geodynamical" databases from Heuret (2005), Conrad and Husson (2009) and Müller et al. (2008). Our statistical study shows that: [1] the most intuitive parameters one can think responsible for coastal uplift (e.g., subduction obliquity, trench motion, oceanic crust age, interplate friction and force, convergence variation, dynamic topography, overriding and subducted plate velocity) are not related with the uplift (and its magnitude); [2] the only intuitive parameter is the distance to the trench which shows in specific areas a decrease from the trench up to a distance of ~300 km; [3] the slab dip (especially the deep slab dip), the position along the trench and the overriding plate tectonic regime are correlated with the coastal uplift, probably reflecting transient changes in subduction parameters. Finally we conclude that the first order parameter explaining coastal uplift is small-scale heterogeneities of the subducting plate, as for instance subducting aseismic ridges. The influence of large-scale geodynamic setting of subduction zones is secondary.
ISSN: 0264-3707

hal-00968538
https://hal.archives-ouvertes.fr/hal-00968538
https://hal.archives-ouvertes.fr/hal-00968538/document
https://hal.archives-ouvertes.fr/hal-00968538/file/henryterraces_v2.pdf
DOI : 10.1016/j.jog.2014.04.001

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
New estimates of trench migration rates allow us to address the dynamics of trench migration and back-arc strain. We show that trench migration is primarily controlled by the subducting plate velocity V-sub, which largely depends on its age at the trench. Using the hot and weak arc to back-arc region as a strain sensor, we define neutral arcs characterized by the absence of significant strain, meaning places where the forces (slab pull, bending, and anchoring) almost balance along the interface between the plates. We show that neutral subduction zones satisfy the kinematic relation between trench and subducting plate absolute motions: V-t = 0.5V(sub) - 2.3 (in cm a(-1)) in the HS3 reference frame. Deformation occurs when the velocity combination deviates from kinematic equilibrium. Balancing the torque components of the forces acting at the trench indicates that stiff (old) subducting plates facilitate trench advance by resisting bending.
ISSN: 0278-7407

hal-00411731
https://hal.archives-ouvertes.fr/hal-00411731
https://hal.archives-ouvertes.fr/hal-00411731/document
https://hal.archives-ouvertes.fr/hal-00411731/file/Lallemand2008-Tectonics.pdf
DOI : 10.1029/2007TC002212

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
[1] Statistical analysis of modern oceanic subduction zone parameters, such as the age of a downgoing plate or the absolute plate motions, is performed in order to investigate which parameter controls the dip of a slab and, conversely, what the influence of slab geometry is on upper plate behavior. For that purpose, parameters have been determined from global databases along 159 transects from all subduction zones that are not perturbed by nearby collision or ridge/plateau/seamount subduction. On the basis of tomographic images, slabs that penetrate through, or lie on, the 670 km discontinuity are also identified. The results of the statistical analysis are as follows: (1) Back-arc stress correlates with slab dip, i.e., back-arc spreading is observed for deep dips (deeper than 125 km) larger than 50°, whereas back-arc shortening occurs only for deep dips less than 30°. (2) Slab dip correlates with absolute motion of the overriding plate. The correlation is even better when the slab lies on, or even more penetrates through, the 670 km discontinuity. (3) Slabs dip more steeply, by about 20° on average, beneath oceanic overriding plates than beneath continental ones. (4) Slabs dip more steeply on average by about 10° near edges. (5) Slab dip does not correlate with the magnitude of slab pull, the age of subducting lithosphere at the trench, the thermal regime of the subducting lithosphere, the convergence rate, or the subduction polarity (east versus west). The present study provides evidence that the upper plate absolute motion plays an important role on slab dip, as well as on upper plate strain. Retreating overriding plates are often oceanic ones and thus may partially explain the steeper slab dips beneath oceanic upper plates. One can infer that low slab dips correlate well with compression in continental advancing upper plates, whereas steep dips are often associated with extension in oceanic retreating upper plates. Excess weight of old slabs is often counterbalanced by other forces, probably asthenospheric in origin, such as lateral mantle flow near slab edges or anchor forces, to determine slab dip. Components: 12,676 words, 13 figures, 1 table.
ISSN: 1525-2027

hal-01261567
https://hal.archives-ouvertes.fr/hal-01261567
https://hal.archives-ouvertes.fr/hal-01261567/document
https://hal.archives-ouvertes.fr/hal-01261567/file/lallemandG32005.pdf
DOI : 10.1029/2005GC000917

Éditeur(s) : HAL CCSD Elsevier
Résumé : A combination of statistical studies on present-day subduction zones and three-dimensional (3D) laboratory models is performed with the aim to clarify the way that plate kinematics control the geometry of the slab and the overriding plate deformation in subduction zones. In 3D laboratory models, the analogue of a two layer linearly viscous lithosphere–upper mantle system is achieved by means of silicon putty glucose syrup tank experiment. The subducting and overriding plate velocities are systematically changed by exploring the variability field of natural plate kinematics. Both statistical and modelling approaches recognize the importance of overriding plate motion on subduction process behavior: (1) trenches migrate at a rate close to the overriding plate motion, but always move slower than the overriding plates. The mechanism at work is a direct consequence of “slab anchoring” opposed by both lithosphere and mantle viscous resistance and is responsible for overriding plate deformation and slab geometry variability. (2) An overriding plate shortens when the overriding plate moves toward the trench and conditions that are favourable for overriding plate extension are created when the overriding plate moves away from the trench. (3) Shallow and steep dips are found if the overriding plate moves toward and away from the trench, respectively.
ISSN: 0012-821X

hal-00406598
https://hal.archives-ouvertes.fr/hal-00406598
DOI : 10.1016/j.epsl.2007.02.004

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Based on global earthquake catalogs, the hypocenters, nodal planes, and seismic moments of worldwide subduction plate interface earthquakes were extracted for the period between 1900 and 2007. Assuming that the seismogenic zone coincides with the distribution of 5.5 <= M < 7 earthquakes, the subduction interface seismogenic zones were mapped for 80% of the trench systems and characterized with geometrical and mechanical parameters. Using this database, correlations were isolated between significant parameters to identify cause-effect relationships. Empirical laws obtained in previous studies were revisited in light of this more complete, accurate, and uniform description of the subduction interface seismogenic zone. The seismogenic zone was usually found to end in a fore-arc mantle, rather than at a Moho depth. The subduction velocity was the first-order controlling parameter for variations in the physical characteristics of plate interfaces, determining both the geometry and mechanical behavior. As such, the fast subduction zones and cold slabs were associated with large and steep plate interfaces, which, in turn, had large seismic rates. The subduction velocity could not account for the potential earthquake magnitude diversity that was observed along the trenches. Events with M-w >= 8.5 preferentially occurred in the vicinity of slab edges, where the upper plate was continental and the back-arc strain was neutral. This observation was interpreted in terms of compressive normal stresses along the plate interface. Large lateral ruptures should be promoted in neutral subduction zones due to moderate compressive stresses along the plate interface that allow the rupture to propagate laterally.
ISSN: 1525-2027

hal-00617681
https://hal.archives-ouvertes.fr/hal-00617681
https://hal.archives-ouvertes.fr/hal-00617681/document
https://hal.archives-ouvertes.fr/hal-00617681/file/heuretG32011.pdf
DOI : 10.1029/2010GC003230