Éditeur(s) : HAL CCSD Ocean Drilling Programm
Résumé : This paper provides a summary of postcruise scientific results from Ocean Drilling Program (ODP) Leg 209 available to date, building upon shipboard observations and syntheses summarized in the Leg 209 Initial Results volume. During Leg 209, 19 holes were drilled at 8 sites along the Mid-Atlantic Ridge from 14°43´ to 15°44´N, mainly in residual mantle peridotite intruded by gabbroic rocks, in order to understand the tectonic and structural processes responsible for formation of oceanic lithosphere with abundant residual peridotite exposed on the seafloor coupled with a relatively low proportion of volcanic rocks. Based on proportions of recovered lithologies, the entire area may be underlain by mantle peridotite with ~20%–40% gabbroic intrusions and impregnations. Impregnated peridotites with olivine + two pyroxenes + plagioclase + spinel that apparently formed in equilibrium probably record crystallization from primitive mid-ocean-ridge basalt at pressures of 0.5–0.6 GPa. Metamorphic equilibria record isobaric cooling to ~1100°C at this pressure. Thus, the conductively cooled thermal boundary layer beneath the Mid-Atlantic Ridge in this region is >15 km thick. Combined crystallization and reaction with residual peridotite formed a series of impregnated peridotites recording increasing Na content at nearly constant Mg#; this process could explain some of the variation in fractionation-corrected Na (e.g., Na = 8.0) observed in mid-ocean-ridge basalts. Clinopyroxene textures and compositions record such impregnation processes, and they are particularly well documented for Site 1274. Other Leg 209 gabbroic rocks formed from extensive crystallization of highly evolved melts, indicating that a substantial proportion of melt entering the thermal boundary layer crystallizes entirely beneath the seafloor, with no volcanic equivalent. Alteration of peridotites occurred over a range of temperatures and is the result of three distinct processes: rock-dominated serpentinization with formation of brucite in olivine-rich lithologies, fluid-dominated serpentinization with formation of magnetite and no brucite, and fluid-dominated talc alteration with addition of SiO2 as well as H2O and oxygen. The latter two processes also exhibit detectable trace element metasomatism that is distinct in its character from the igneous impregnation described in the previous paragraph. Microstructures show that most residual peridotites were not ductilely deformed at temperatures less than ~1200°C. Structural and paleomagnetic data require tectonic rotations of relatively undeformed blocks; some rotations probably exceeded 60° around nearly horizontal axes parallel to the rift axis. Rotations occurred along several generations of high-temperature mylonitic shear zones extending deeper than 15 km depth and numerous faults at lower temperature. Early formed shear zones and faults were passively rotated around later features; such a process could have produced low-angle fault surfaces without slip on low-angle faults. This region provides end-member examples of processes that are common at many or most slow-spreading ridges. Osmium isotope ratios indicate an ancient history of depletion for residual peridotites from the 14°–16°N region along the Mid-Atlantic Ridge. Though depleted Os isotope ratios in peridotite have been reported elsewhere along the global ridge system, the values from this region are among the most depleted. In general, Os isotope ratios from mid-ocean-ridge basalts are systematically more radiogenic than Os isotope ratios from ridge peridotite samples, suggesting a polygenetic heterogeneous source for mid-ocean-ridge basalts. Geochemical studies of zircons from Leg 209 gabbroic rocks and impregnated peridotites, together with other ridge and arc-related zircons, indicate that ridge zircons have systematically lower fractionation-corrected U and Th concentrations compared to arc zircons. This observation provides a tool for interpreting the tectonic provenance of ancient detrital zircons and indicates an arclike provenance for Hadean detrital zircons. Geobiological studies and aerobiological studies were also undertaken during Leg 209. The geobiological work found no measurable microbial enhancement of olivine dissolution rate, possibly because the samples from Leg 209 were sterile. The aerobiological study determined that dust from North Africa, collected from the derrick of the JOIDES Resolution during Leg 209, contains a variety of abundant microorganisms.
Proceedings ODP, scientific results, 209

hal-00407966
https://hal.archives-ouvertes.fr/hal-00407966
DOI : 10.2973/odp.proc.sr.209.001.2007

Éditeur(s) : HAL CCSD Elsevier
Résumé : Carbon emission at volcanic centers requires a constant balance between output (mostly by volcanism, either at plate boundaries or intraplate) and input (mostly at trench settings) of carbon from and to the Earth's mantle. The form of carbon that resides in the mantle is controlled by depth (pressure) and oxygen fugacity, the latter in turn depending on the depth and the concentration of iron in the mantle. In the shallow, lithospheric mantle, carbon is likely to be present in the oxidized form of CO2 (except under cratons where carbon is reduced to graphite or diamond). Below approximately 90 km, in the asthenosphere, the oxidized form of carbon is carbonate, either mineral or melt, depending on the thermal regime. At depths greater than approximately 150 km, the asthenospheric mantle is too reducing for carbon to stay in its oxidized form and only diamond is present, unless there is sufficient hydrogen to form reduced C–H fluids. Hence, the region located in the depth range of 90 to 150 km deep is where carbonatitic melts can most likely be produced and impregnate the surrounding mantle through metasomatism. The upper bound of this region is called the carbonate ledge. This limit prevents carbonate (either solid or molten) from ascending because of degassing and CO2 liberation. The lower bound is a redox front where redox melting (that is, melting caused by oxidation) may take place in an ascending portion of carbon-containing mantle. Carbonatite eruptions and presence of carbonate mineral inclusions in deep-seated diamonds provide evidence that these boundaries can be trespassed in some cases.An analysis of the experimental data that has bearing on silicate melting in the presence of carbon further shows that the carbonate ledge is a melting curve with a negative or flat Clapeyron (dP/dT) slope. In the carbonated ultrabasic (peridotite) systems, the carbonate ledge is located between ~ 2–3 GPa. The ledge divides the pressure–temperature space into a region of low-pressure silicate melt production, and a high-pressure region where carbonatites can be produced. Carbonatitic melts in equilibrium with mantle peridotite have compositions close to dolomitic (approximately equal amounts of Ca and Mg) with a general trend of becoming markedly more magnesian with increasing pressure. Calcic carbonatites may be stable at pressures < 2 GPa if clinopyroxene is absent. At mantle transition zone pressure range, there seems to be a melting temperature decrease (negative fusion slope), which may be caused by the stabilization of majoritic garnet.The carbonated basic (broadly eclogitic) system is more complex than the peridotitic one, because of the strong control of bulk silicate composition on melting temperatures, and hence, on melt composition. In carbonated eclogite systems, we propose that the effect of bulk composition upon all observed features can perhaps be related to silica super-saturation, or lack thereof. In some cases, high calcium (> 80 mol% CaCO3) melts can be produced, making the melting of carbonated eclogites an appealing scenario for the genesis of calcio-carbonatites in the Earth's mantle. Comparison with modeled pressure–temperature paths of subducted oceanic lithosphere shows that fusion of carbonated eclogite at depths shallower than 200 km should be expected for hot (Cascadian-type) subduction thermal regimes. On the other hand, in the case of cooler thermal regimes (Honshu-type, for instance), subducted carbonates may be stable to greater depths in Earth at trench settings, depending on the bulk composition of the system.Furthermore, high-pressure experiments show evidence of a continuum among carbonatitic, kimberlitic, melilititic, and basaltic liquids, for increasing melting degree of carbonated peridotite. This continuum has not been documented in the case of fusion of carbonated eclogite. It may be present, however, when certain sediments are fused, although the silicate melts are granitic to rhyodacitic instead of being kimberlitic in composition. Additional high-pressure work on phase relations in the simple binary system CaCO3–MgCO3 and specific focus on oxide solubility in the vapor phase have the potential to further clarify phase relations on complex silicate–carbonate systems at mantle conditions.
ISSN: 0009-2541

hal-01277770
https://hal.archives-ouvertes.fr/hal-01277770
DOI : 10.1016/j.chemgeo.2015.05.018

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : ODP Leg 209 Site 1274 mantle peridotites are highly refractory in terms of lack of residual clinopyroxene, olivine Mg# (up to 0.92) and spinel Cr# (∼0.5), suggesting high degree of partial melting (>20%). Detailed studies of their microstructures show that they have extensively reacted with a pervading intergranular melt prior to cooling in the lithosphere, leading to crystallization of olivine, clinopyroxene and spinel at the expense of orthopyroxene. The least reacted harzburgites are too rich in orthopyroxene to be simple residues of low-pressure (spinel field) partial melting. Cu-rich sulfides that precipitated with the clinopyroxenes indicate that the intergranular melt was generated by no more than 12% melting of a MORB mantle or by more extensive melting of a clinopyroxene-rich lithology. Rare olivine-rich lherzolitic domains, characterized by relics of coarse clinopyroxenes intergrown with magmatic sulfides, support the second interpretation. Further, coarse and intergranular clinopyroxenes are highly depleted in REE, Zr and Ti. A two-stage partial melting/melt–rock reaction history is proposed, in which initial mantle underwent depletion and refertilization after an earlier high pressure (garnet field) melting event before upwelling and remelting beneath the present-day ridge. The ultra-depleted compositions were acquired through melt re-equilibration with residual harzburgites. Electronic supplementary material Supplementary material is available in the online version of this article at ;; and is accessible for authorized users
ISSN: 0010-7999

hal-00404655
https://hal.archives-ouvertes.fr/hal-00404655
DOI : 10.1007/s00410-006-0148-6

Éditeur(s) : HAL CCSD Elsevier
Résumé : The ultramafic–mafic complexes located at the base of obducted paleo-island arcs are commonly interpreted as evidence for intra-crustal fractionation of primitive (high-Mg#) mantle melts. The present study, realized on the Jijal mafic–ultramafic basal section of the Cretaceous Kohistan oceanic arc (N Pakistan), discards a crystal fractionation model from a single parental magma to take into account the geochemical and isotope variations observed between the plutonic crust and the underlying ultramafic section. The basal ultramafic rocks, i.e. dunites, wehrlites and clinopyroxenites, show high Mg#, extremely depleted REE patterns, no marked HFSE anomalies and high LILE enrichment. Cpx and leached whole rocks from this unit yield restricted εNd values (+ 5.5 to + 6.8), a large εSr range (− 5.9 to + 8.8) and mainly radiogenic 207Pb/204Pb ratios. The overlying mafic section, i.e. gabbroic rocks, displays low Mg# (46 < Mg# < 54), enriched REE patterns and marked HFSE anomalies. These plutonic rocks have also very homogeneous Sr and Pb isotopic compositions defining a restricted domain, which does not overlap that of the ultramafic samples. Moreover, Cpx from the basal ultramafics yield an Sm–Nd isochron at 117 ± 7 Ma interpreted as dating crystallization of the ultramafic section. Together, these results indicate that the mafic rocks on one hand and the ultramafic rocks on the other hand, originate from separate sources with specific emplacement underneath the subduction zone. A lherzolite lens, collected from the top of the mafic section, plots on the early Cretaceous Sm–Nd isochron and therefore yields the same 143Nd/144Nd initial ratio. This suggests that the ultramafic part of the lower Kohistan arc complex sampled the initiation stages of the subduction with production of magmas with boninite-like features. At this stage, the mantle wedge has been already modified by percolation of the first slab-derived fluids. On such a scenario the lherzolite lens would correspond to the lithospheric mantle underneath the arc before its initiation. A multi-stage history is proposed for the evolution for the Kohistan arc through not, vert, similar 30 Ma. Stage #1 reflects the spontaneous initiation of subduction associated with extensive boninitic affinity magmatism, stages #2 and #3 are related to arc building by tholeiitic melts and, a fourth step (stage #4) corresponds to the intra-crustal differentiation.
ISSN: 0012-821X

hal-00407206
https://hal.archives-ouvertes.fr/hal-00407206
DOI : 10.1016/j.epsl.2007.06.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The origin of plate tectonics is one of the most fundamental issues in earth and planetary sciences. Laboratory experiments indicate that the viscosity of silicate rocks is so strongly temperature-dependent that the entire surface of the Earth should be one immobile rigid plate. The rheology of oceanic lithosphere is, however, still poorly understood, and there exist few constraints on the temperature dependency of viscosity on the field scale. Here we report a new kind of observational constraint based on the geoid along oceanic fracture zones. We identify a large number of conspicuous small-scale geoid anomalies, which cannot be explained by the standard evolution model of oceanic lithosphere, and estimate their source density perturbations using a new Bayesian inversion method. Our results suggest that they are caused most likely by small-scale convection involving temperature perturbations of ∼300 K±100 K∼300 K±100 K. Such thermal contrast requires the activation energy of mantle viscosity to be as low as View the MathML source100±50 kJmol−1 in case of diffusion creep, and View the MathML source225±112 kJmol−1 in case of dislocation creep, substantially reducing the thickness of the stiffest part of oceanic lithosphere. Oceanic lithosphere may thus be broken and bent much more easily than previously thought, facilitating the operation of plate tectonics.
ISSN: 0012-821X

hal-01467827
https://hal.archives-ouvertes.fr/hal-01467827
DOI : 10.1016/j.epsl.2016.05.027

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Mantle-derived xenoliths hosted by melilitite lavas from In Teria (Ahaggar, SE Algeria) include garnet and spinel peridotites, pyroxenite and phlogopite megacrysts. The spinel and garnet peridotites record an early deformation event, which formed porphyroclastic microstructures and olivine crystal preferred orientations, followed by static infiltration of hydrous alkaline melts. This metasomatic stage (stage 1) is characterized by the crystallization of phlogopite in the garnet and spinel peridotites, amphibole in the spinel peridotites and clinopyroxene in the garnet peridotite, which record chemical equilibration with an alkaline silicate melt. These early events were largely overprinted by carbonatitic metasomatism (stage 2), which is observed only in the spinel peridotites. Spinel peridotite major and trace element compositions, as well as the compositions of newly formed minerals, are characteristic of interaction with carbonate melt, associated with strong enrichment in incompatible trace elements in clinopyroxene. This second stage was followed by crystallization of pyroxenites (stage 3) in vein conduits, probably segregated from alkaline melts. We propose a scenario in which the different metasomatic imprints record successive stages of interaction between lithospheric mantle and sublithospheric melts throughout the Cenozoic. In Sr–Nd isotope space, the host melilitites and several xenoliths are clustered and plot close to the HIMU mantle end-member. However, some peridotite xenoliths are shifted towards more radiogenic 87Sr/86Sr values. In 207Pb/204Pb–206Pb/204Pb and 208Pb/204Pb–06Pb/204Pb space the In Teria samples define a relatively large domain characterized by high 206Pb/204Pb and 208Pb/204Pb, consistent with a contribution of an HIMU component, considered to represent a sublithospheric signature. The highest 87Sr/86Sr values are comparable with those ascribed to the EM1 mantle end-member, representing the signature of the lower continental lithosphere, and are probably inherited from the pre-metasomatic lithospheric mantle beneath In Teria. Numerical modelling of porous percolation of melt of sublithospheric origin through an EM1-like lithospheric mantle protolith reproduces the In Teria peridotite compositions, using moderately sub-chondritic Sr/Nd values for the peridotite (e.g. In Teria garnet peridotite) and moderately super-chondritic Sr/Nd values in the melt (approximately ocean island basalt values). A few spinel peridotites require a component characterized by a 143Nd/144Nd signature higher than both the EM1 end-member and the local Ahaggar basalts; the 208Pb/204Pb compositions of several samples point to a component with a depleted mid-ocean ridge basalt (MORB) mantle (DMM) signature. Thus the lithospheric mantle beneath In Teria probably did not have a uniform EM1 signature before the onset of metasomatism; it included a DMM peridotite component as well as some peridotites with elevated 143Nd/144Nd values recording long-term LREE depletion.
ISSN: 0022-3530

hal-01356781
https://hal.archives-ouvertes.fr/hal-01356781
DOI : 10.1093/petrology/egw009

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Phase equilibrium data pertaining to melting of simplified carbonated peridotite in the systems CaO-MgO-SiO2-CO2 and CaO-MgO-Al2O3-SiO2-CO2 at pressures of 10-26 GPa, corresponding to similar to 300-750 km depths in the Earth, are presented. In both the studied systems, liquid compositions, with changing crystalline phase assemblage, are carbonatitic throughout the studied pressure range. In the system CMS-CO2, melting phase relations are isobarically invariant; liquid is in equilibrium with forsterite + clinoenstatite + clinopyroxene + magnesite, forsterite + majorite + clinopyroxene + magnesite, wadsleyite + majorite + clinopyroxene + magnesite, ringwoodite + majorite + calcium-silicate perovskite + magnesite, magnesium-silicate perovskite + periclase + calcium-silicate perovskite + magnesite at 12, 14, 16, 20, and 26 GPa, respectively. In the system CMAS-CO2, a phase assemblage consisting of forsterite + orthopyroxene + clinopyroxene + magnesite + garnet + melt from 10 to 14 GPa is isobarically invariant. However, owing to the disappearance of orthopyroxene at pressures greater than 14 GPa, from 16 and up to at least 26 GPa, the solidus of simplified carbonated peridotite spans a divariant surface in pressure-temperature space. The liquid coexists with wadsleyite + clinopyroxene + garnet + magnesite, ringwoodite + calcium-silicate perovskite + garnet + magnesite, and magnesium-silicate perovskite + periclase + calcium-silicate perovskite + magnesite at 16, 20, and 26 GPa, respectively. A curious, and as yet unexplained, feature of our study is an abrupt drop in the solidus temperature between 14 and 16 GPa that causes a small amount of melting of carbonated mantle in the Transition Zone of the Earth. In the systems CMS-CO2 and CMAS-CO2 liquid compositions at 16 and 20 GPa are highly calcic bona fide carbonatites; however, these liquids revert to being magnesiocarbonatites at 10-14 and 26 GPa. In the system CMS-CO2, at 16 GPa we locate an isobaric invariant point consisting of wadsleyite + clinopyroxene + anhydrous B + magnesite + melt. The presence of anhydrous B at 16 GPa and 1475 degrees C is interesting, as it lies outside the composition space of the mantle peridotite analog we have studied. However, despite the presence of two highly magnesian silicate crystalline phases, wadsleyite and anhydrous B, at 16 GPa and 1475 degrees C, the liquid composition remains calcic with molar Ca-number [Ca/(Ca + Mg) x 100] of about 63. The melting reactions at 16 and 20 GPa (with or without anhydrous B) show that lime-bearing crystalline silicates play a fairly large part in generating and controlling the composition of the liquids. At 16 GPa, in the system CMS-CO2, we also report an experimental run at 1575 degrees C, in which liquid coexists with only wadsleyite and majorite. The liquid composition is less calcic (Ca-number 54) than that for other runs at lower temperatures, but is still more calcic than liquids at 10-14 and 26 GPa in both the studied systems. At present, the likely cause for these changes in the reported phase relations is not known. For normally assumed mantle temperatures, melting in the Transition Zone of the Earth, owing to the presence of carbonate, is probably unavoidable. The depth range of the drop in the carbonated peridotite solidus closely matches that of commonly observed low seismic velocities at similar to 400-600 km depth in the Earth.
ISSN: 0022-3530

hal-00669945
https://hal.archives-ouvertes.fr/hal-00669945
DOI : 10.1093/petrology/egr048

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigated the response of the crystal structure, lattice parameters, and unit-cell volume of hydrous layered silicate phlogopite at conditions relevant to subduction zone settings. We have used first principles simulation based on density functional theory to calculate the equation of state and full elastic constant tensor. Based on the generalized gradient approximation, the full single crystal elastic constant tensor with monoclinic symmetry shows significant anisotropy with the compressional elastic constants: c11 = 181 GPa, c22 = 185 GPa, c33 = 62 GPa, the shear elastic constants c44 = 14 GPa, c55 = 20 GPa, c66 = 68 Ga, and c46 = −6 GPa; the off diagonal elastic constants c12 = 48 GPa, c13 = 12 GPa, c23 = 12 GPa, c15 = −16 GPa, c25 = −5 GPa and c35 = −1 GPa at zero pressure. The elastic anisotropy of phlogopite is larger than most of the layered hydrous phases relevant in the subduction zone conditions. The shear anisotropy, AVS for phlogopite is ∼77% at zero pressure condition and although it decreases upon compression it remains relatively high compared to other hydrous phases relevant in the subduction zone settings. We also note that the shear elastic constants for phlogopite are relatively low. Phlogopite also has a high isotropic bulk VP/VS ratio ∼2.0. However, the VP/VS ratio also exhibits significant anisotropy with values as low as 1.49. Thus, phlogopite bearing metasomatized mantle could readily explain unusual VP/VS ratio as observed from seismological studies from the mantle wedge regions of the subduction zone.
ISSN: 0031-9201

hal-01115670
https://hal.archives-ouvertes.fr/hal-01115670
DOI : 10.1016/j.pepi.2014.05.004

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : National audience
The late Lower to Middle Permian Panjal Traps (NW Himalaya, India-Pakistan) represent the greatest magmatic province erupted on the northern Indian platform during the Neotethys opening. New geochemical and isotopic analyses were performed on basalts from the eastern borders of the traps (SE Zanskar-NW Spiti area) in order to characterize this volcanism, to discuss its compositional variations in comparison to Panjal counterparts and its relationships with the opening of Neotethys. Lavas show features of tholeiitic low-Ti (< 1.6%) continental flood basalts with LREE, Th enrichments and Nb-Ta negative anomalies. Trace element ratios combined with {varepsilon}Ndi values (–3.6 to +0.9) and high Pb isotopic ratios suggest that these tholeiitic basalts were derived from an OIB-like mantle contaminated at various degrees by a continental crust component. Previous geochemical features are broadly similar to those of the coeval Panjal volcanic sequences identified westwards (Ladakh, Kashmir and Pakistan). Present geochemical constraints obtained for the Panjal Traps basalts suggest they originated from rapid effusion of tholeiitic melts during opening of the Neotethys Ocean. Similar magmatism implying an OIB-type reservoir is contemporaneously recognized on and along the adjacent Arabian platform. Both Indian and Arabian Permian volcanics were emplaced during coeval syn-rift to post rift transition. These Lower to Middle Permian south Neotethyan continental flood magmatism are regarded as associated to a passive rifting. In this scheme, OIB-type isotopic signature would be related either to a melting episode of syn-rift up-welling mantle plumes or to a melting of a regional abnormally hot and enriched mantle.
EISSN: 1777-5817

insu-00338862
https://hal-insu.archives-ouvertes.fr/insu-00338862
DOI : 10.2113/gssgfbull.179.4.383

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Sapat peridotite in Kohistan (NW Pakistan) is a 12x1 km sized body of meta-harzburgites, dunites, pyroxenites and meta-gabbros in the hanging wall of the Indus Suture Zone. Field relations, micro-textures, bulk and mineral chemistry document melt-rock reactions producing dunites at the expense of meta-harzburgites, and a consecutive olivine-clinopyroxenite formation from the same melt type. The association of mesa-gabbros, dunites, and pyroxenites is interpreted as a crust-mantle transition zone produced by the percolation of highly depleted primitive arc melt. The meta-harzburgites represent large portions of refractoty mantle that have suffered melt extraction and metasomatism prior to their interaction with the dunite-forming primitive arc melt and the establishment of the crust-mantle transition zone. Uncommon vein assemblages in the dunites that include Cr-clinochlore, calcite and olivine document a late percolation of slab-related, volatile-rich fluids. Taking into account the highly refractory composition of the Sapat mantle, its structural position, the evidence for interaction with highly depleted arc melts and the sub-solidus interaction with volatile-rich arc fluids, the Sapat ultramafic rocks are interpreted as being derived from the frontal Kohistan arc, representing a crust-mantle transition formed by arc magmatism.
ISSN: 0024-4937

hal-00424515
https://hal.archives-ouvertes.fr/hal-00424515
DOI : 10.1016/j.lithos.2008.07.004

Éditeur(s) : Oxford Univ Press
Résumé : In subduction zones, melting and dehydration of the subducted slab introduce material into the mantle wedge and modify its chemical and isotopic composition. As a consequence, island arc lavas differ significantly from mid-ocean ridge basalts and ocean island basalts. In some arcs, the composition of lavas is strongly influenced by the sedimentary material introduced with the slab; in others, magma composition is mainly affected by aqueous fluids released by the slab. The Lesser Antilles arc is known for its extreme continental-crust-like signature but for some Lesser Antilles lavas subducted sediments are barely involved and enrichment in fluid-mobile elements (Ba, U, Sr, Pb, etc.) is the dominant feature. Here we evaluate whether La/Sm is a quantitative proxy of sediment involvement in volcanic arcs, and we relate dehydration and melting processes to the temperature and pressure conditions of the slab. We use Martinique as a case study because in this island both dehydration and sediment melting fingerprints coexist. We measured major and trace elements for about 130 age-constrained samples, carefully chosen to cover all volcanic phases of Martinique (25 Ma to present). Using these results we demonstrate that: (1) weathering does not modify the La/Sm ratio; (2) fractional crystallization of amphibole and/or garnet does not increase La/Sm by more than 20%; (3) rare earth element transfer from wall-rock to magma during fractionation is not significant; (4) melting of the mantle source increases La/Sm by only about 20%. As a consequence, we show that the proportion of slab sediment incorporated in the mantle wedge controls the La/Sm ratio of the source. The observed correlations between La/Sm and Nd and Hf isotopic compositions indicate that the effect of sediment addition is the overwhelming factor: La/Sm is a good proxy for slab sediment proportion in Martinique. We observe a geographical gradient between slab dehydration and sediment melting on the island. Whereas lavas located on the western side of the island display a clear sedimentary input in their source, lavas located on the eastern side of the island, closer to the trench, are clearly influenced by dehydration of the subducted slab. In addition, the aqueous fluids clearly come from the subducted basalt and they did not interact with the overlying sediments. The influence of sediment added to the source of the magmas increases from the eastern part to the western part of the island. We relate this geographical change to the pressure and temperature conditions at the slab surface. Sediments probably cross their solidus under Martinique and hydrous melting is triggered. Finally, we show that under all volcanic arcs where the signature of sediments overwhelms the signature of fluids, the slab surface reaches P-T conditions that allow the subducted sediments to melt. Inversely, under most volcanic arcs where the signal of aqueous fluids dominates over sediment melts, the subducted slab is not hot enough for the sedimentary pile to melt.
Journal Of Petrology (0022-3530) (Oxford Univ Press), 2012-12 , Vol. 53 , N. 12 , P. 2441-2464

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00113/22392/20234.pdf
DOI:10.1093/petrology/egs055
http://archimer.ifremer.fr/doc/00113/22392/

Éditeur(s) : HAL CCSD Copernicus Publications
Résumé : This workshop report describes plans for scientific drilling in the Samail ophiolite in Oman in the context of past, current, and future research. Long-standing plans to study formation and evolution of the Samail crust and upper mantle, involving igneous and metamorphic processes at an oceanic spreading center, have been augmented by recent interest in ongoing, low temperature processes. These include alteration and weathering, and the associated sub-surface biosphere supported by chemical potential energy due to disequilibrium between mantle peridotite and water near the surface. This interest is motivated in part by the possibility of geological carbon capture and storage via engineered, accelerated mineral carbonation in Oman.
ISSN: 1816-8957

hal-00858243
https://hal.archives-ouvertes.fr/hal-00858243
DOI : 10.2204/iodp.sd.15.10.2013

Éditeur(s) : HAL CCSD
Résumé : The mantle deformation processes that control the thinning and break-up of continental lithosphere remain poorly understood. Our knowledge is restricted to either lithospheric scale thermo-mechanical models --that use experimentally derived flow laws--, geophysical imaging and/or rare xenoliths from active continental rifts, such as the East African Rift System. The originality of this work relies on the study of the two largest outcrops of diamond facies subcontinental lithospheric mantle in the world: the Beni Bousera and Ronda peridotite massifs in N Morocco and S Spain, respectively. The structures and petrologic and metamorphic zoning preserved in these massifs --implying a polybaric and polythermal evolution-- provides a unique opportunity to investigate the thermo-mechanical evolution of thick subcontinental lithospheric mantle in extensional settings. In this thesis we studied the deformation mechanisms in both peridotites and pyroxenites to constrain the modes of exhumation of subcontinental lithospheric mantle from garnet-, to spinel-, and finally, to plagioclase lherzolite facies conditions. We combined field mapping of tectonometamorphic domains and structural mapping of ductile structures, microstructural analysis, crystal preferred orientations (CPO) measurements and conventional thermobarometric calculations and thermodynamic modeling (Perple_X) to unravel the pressure and temperature conditions of deformation. We showed that exhumation from garnet- to spinel lherzolite facies conditions was accommodated by fast shearing --in thermal disequilibrium--along a lithospheric scale transtensional shear zone. In this context, the petrological zoning and the large temperature gradient (ca. 100ºC/km) preserved in the Beni Bousera massif represent the mechanical juxtaposition of progressively deeper and hotter lithospheric levels at depths of ca. 60 km in the latest Oligocene (ca. 25 Ma). Final exhumation from spinel- to plagioclase facies lherzolite and emplacement into the crust is best recorded in the Ronda massif where it occurred by inversion and lithospheric scale folding of the highly attenuated continental lithosphere in a back-arc region, probably in relation with southward slab rollback and subsequent collision with the palaeo-Maghrebien passive margin in the early Miocene (21-23 Ma).
Les processus de déformation contrôlant l'amincissement de la lithosphère continentale sont encore mal contraints. Nos connaissances sont principalement basées sur la modélisation thermomécanique d'extension à l'échelle de la lithosphère--utilisant des lois rhéologiques derivées expérimentalement, l'imagerie géophysique et l'analyse de xénolithes provenant de rift continentaux actifs à ce jour, tels que le Rift Est-Africain. L'originalité de ce travail reside dans l'étude des deux plus grands massifs de péridotites sous-continentales ayant enregistrées des conditions primaires du facies à diamant: les massifs de Beni Bousera au nord du Maroc et de Ronda au sud de l'Espagne, respectivement. Les structures et la zonation petrologique et métamorphique --impliquant une évolution polybarique et polythermique-- préservéees dans ces massifs offrent une opportunité unique pour étudier l'évolution thermo-mécanique du manteau sous-continental dans un contexte extensif. Dans ce travail, nous avons étudié les mécanismes de déformation des péridotites et des pyroxénites afin de contraindre les modes d'exhumation du manteau lithosphérique sous-continental, depuis des conditions du facies des lherzolites à grenat, jusqu'au facies à spinelle et enfin à plagioclase. Nous avons combiné la cartographie des faciès tectono-métamorphiques et des structures ductiles de déformation, l'analyse des microstructures, la mesure d'orientations préférentielles de réseau (OPR), et la géothermobarométrie conventionelle couplée à la modélisation thermodynamique (PerpleX) afin de contraindre les conditions de pression et température de la déformation. Nous avons montré que l'exhumation précoce du facies à grenat au facies à spinelle était accomodée par une faille transtensive affectant le manteau lithosphérique. Dans ce contexte, la zonation tectono-métamorphique et le gradient thermique important (ca. 100ºC/km) préservés à Beni Bousera résultent de la juxtaposition mécanique de domaines lithosphériques initialement équilibrés à différentes pressions et températures, fossilisée à une profondeur de ca. 60 km durant l'Oligocène supérieur (ca. 25 Ma). L'exhumation finale du facies de lherzolite à spinelle au facies à plagioclase et l'emplacement final dans la croûte, mieux enregistrés dans Ronda, se sont produits par inversion et plissement de la section lithosphérique fortement amincie dans un contexte arrière-arc, probablement lors du retrait vers le sud de la lithosphère subduite et la collision de l'arc avec les paléo-marges maghrébines au Miocène inférieur (21-23 Ma).
https://tel.archives-ouvertes.fr/tel-00767700

tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700/document
https://tel.archives-ouvertes.fr/tel-00767700/file/THESE_Frets.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the southeastern corner of the Tyrrhenian basin, in the central Mediterranean Sea, a tight alignment of earthquakes along a well-defined Benioff zone marks one of the narrowest active trenches worldwide, where one of the last fragment of the former Tethys ocean is consumed. Seismic tomography furnishes snapshot images of the present-day position of this slab, and seismic anisotropy allows to reconstruct the past kinematics of the subduction process. Using seismic anisotropy fast directions as a proxy for the present and past mantle flow, we look backward for the seismic traces of the slab motion through the western-central Mediterranean mantle, from the starting locus of subduction toward its present day position. The result of combining independent data sets provides a coherent pattern of anisotropy that illustrates an example of slab rollback from its initiation point to its present-day position.
ISSN: 0012-821X

hal-01389115
http://hal.univ-reunion.fr/hal-01389115
http://hal.univ-reunion.fr/hal-01389115/document
http://hal.univ-reunion.fr/hal-01389115/file/Lucente_medit_EPSL2006_hal.pdf
DOI : 10.1016/j.epsl.2005.10.041

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The lithospheric mantle is intrinsically heterogeneous and anisotropic. These two properties govern the repartition of deformation, controlling intraplate strain localization and development of new plate boundaries. Geophysical and geological observations provide clues on the types, ranges, and characteristic length scales of heterogeneity and anisotropy in the lithospheric mantle. Seismic tomography points to variations in geothermal gradient and hence in rheological behavior at scales of hundreds of km. Seismic anisotropy data substantiate anisotropic physical properties consistent at scales of tens to hundreds of km. Receiver functions imply lateral and vertical heterogeneity at scales < 10 km, which might record gradients in composition or anisotropy. Observations on naturally deformed peridotites establish that compositional heterogeneity and Crystal Preferred Orientations (CPOs) are ubiquitous from the mm to the km scales. These data allow discussing the processes that produce/destroy heterogeneity and anisotropy and constraining the time scales over which they are active. This analysis highlights: (i) the role of deformation and reactive percolation of melts and fluids in producing compositional and structural heterogeneity and the feedbacks between these processes, (ii) the weak mechanical effect of mineralogical variations, and (iii) the low volumes of fine-grained microstructures and difficulty to preserve them. In contrast, olivine CPO and the resulting anisotropy of mechanical and thermal properties are only modified by deformation. Based on this analysis, we propose that strain localization at the plate scale is, at first order, controlled by large-scale variations in thermal structure and in CPO-induced anisotropy. In cold parts of the lithospheric mantle , grain size reduction may contribute to strain localization, but the low volume of fine-grained domains limits this effect.
ISSN: 0040-1951

hal-01277174
https://hal.archives-ouvertes.fr/hal-01277174
DOI : 10.1016/j.tecto.2015.07.026

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We determine the elasticity of FeSiO3 perovskite for various spin configurations using density-functional theory calculations. The elastic moduli and the bulk seismic wave velocities are weakly affected by the spin transition. However we show that the intrinsic differences in seismic anisotropy between the high-spin and low-spin phases of Fe-bearing perovskite coupled with lattice preferred orientation that can develop due and during the convection may lead to distinct seismic signatures between the top and the bottom of the lower mantle. These signatures should be detectable in observations and they need to be taken into account in tomographic studies of the Earth's lower mantle.
ISSN: 0094-8276

hal-00512662
https://hal.archives-ouvertes.fr/hal-00512662
DOI : 10.1029/2010GL043320

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The western part of the Ronda peridotite massif (Southern Spain) consists mainly of highly foliated spinel-peridotite tectonites and undeformed granular peridotites that are separated by a recrystallization front. The spinel tectonites are interpreted as volumes of ancient subcontinental lithospheric mantle and the granular peridotites as a portion of subcontinental lithospheric mantle that underwent partial melting and pervasive percolation of basaltic melts induced by Cenozoic asthenospheric upwelling. The Re-Os isotopic signature of sulfides from the granular domain and the recrystallization front mostly coincides with that of grains in the spinel tectonites. This indicates that the Re-Os radiometric system in sulfides was highly resistant to partial melting and percolation of melts induced by Cenozoic lithospheric thermal erosion. The Re-Os isotopic systematics of sulfides in the Ronda peridotites thus mostly conserve the geochemical memory of ancient magmatic events in the subcontinental lithospheric mantle. Os model ages record two Proterozoic melting episodes at similar to 1.6 to 1.8 and 1.2-1.4 Ga, respectively. The emplacement of the massif into the subcontinental lithospheric mantle probably coincided with one of these depletion events. A later metasomatic episode caused the precipitation of a new generation of sulfides at similar to 0.7 to 0.9 Ga. These Proterozoic Os model ages are consistent with results obtained for several mantle suites in Central/Western Europe and Northern Africa as well as with the Nd model ages of the continental crust of these regions. This suggests that the events recorded in mantle sulfides of the Ronda peridotites reflect different stages of generation of the continental crust in the ancient Gondwana supercontinent.
ISSN: 0010-7999

hal-00564508
https://hal.archives-ouvertes.fr/hal-00564508
DOI : 10.1007/s00410-009-0429-y

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Chromitite pods in the Mayarí-Cristal ophiolitic massif (eastern Cuba) were formed in the Late Cretaceous when island arc tholeiites and MORB-like back-arc basin basalts reacted with residual mantle peridotites and generated chromite-rich bodies enclosed in dunite envelopes. Platinum-group minerals (PGM) in the podiform chromitites exhibit important Os-isotope heterogeneities at the kilometric, hand sample and thin section scales. 187Os/188Os calculated at the time of chromitite crystallization (~90 Ma) ranges between 0.1185 and 0.1295 (γOs = −7.1 to +1.6, relative to enstatite chondrite), and all but one PGM have subchondritic 187Os/188Os. Grains in a single hand sample have initial 187Os/188Os that spans from 0.1185 to 0.1274, and in one thin section it varies between 0.1185 and 0.1232 in two PGM included in chromite which are only several millimeters apart. As the Os budget of a single micrometric grain derives from a mantle region that was at least several m3 in size, the variable Os isotopic composition of PGM in the Mayarí-Cristal chromitites probably reflects the heterogeneity of their mantle sources on the 10-100 m scale. Our results show that this heterogeneity was not erased by pooling and mingling of individual melt batches during chromitite crystallization but was transferred to the ore deposits on mineral scale. The distribution of the Os model ages calculated for PGM shows four main peaks, at ~100, 500, 750 and 1,000 Ma. These variable Os model ages reflect the presence of different depleted domains in the oceanic (Pacific-related) upper mantle of the Greater Antilles paleo-subduction zone. The concordance between the age of crystallization of the Mayarí-Cristal chromitites and the most recent peak of the Os model age distribution in PGM supports that Os in several grains was derived from fertile domains of the upper mantle, whose bulk Os isotopic composition is best approximated by that of enstatite chondrites; on the other hand, most PGM are crystallized by melts that tapped highly refractory mantle sources.
ISSN: 0010-7999

hal-00822742
https://hal.archives-ouvertes.fr/hal-00822742
DOI : 10.1007/s00410-010-0575-2

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Two-dimensional simulations using a thermomechanical model based on a finite-difference method on a staggered grid and a marker in cell method are performed to study the plume-lithosphere interaction beneath moving plates. The plate and the convective mantle are modelled as a homogeneous peridotite with a Newtonian temperature- and pressure-dependent viscosity. A constant velocity, ranging from 5 to 12.5 cm yr−1, is imposed at the top of the plate. Plumes are generated by imposing a thermal anomaly of 150 to 350 K on a 50 km wide domain at the base of the model (700 km depth); the plate atop this thermal anomaly is 40 Myr old. We analyse (1) the kinematics of the plume as it impacts the moving plate, (2) the dynamics of time-dependent small-scale convection (SSC) instabilities developing in the low-viscosity layer formed by spreading of hot plume material at the base of the lithosphere and (3) the resulting thermal rejuvenation of the lithosphere. The spreading of the plume material at the base of the lithosphere, characterized by the ratio between the maximum down- and upstream horizontal (dimensionless) velocities in the plume-fed sublithospheric layer, Peup/Pedown depends on the ratio between the maximum plume upwelling velocity and the plate velocity, Peplume/Peplate. For fast plate velocities and sluggish plumes (low Peplume/Peplate), plate motion drags most plume material and downstream flow is dominant. As Peplume/Peplate increases, an increasing part of the plume material flows upstream. SSC systematically develops in the plume-fed sublithospheric layer, downstream from the plume. Onset time of SSC decreases with the Rayleigh number. For vigorous plumes, it does not depend on plate velocity. For more sluggish plumes, however, variations in the plume spreading behaviour at the base of the lithosphere result in a decrease in the onset time of SSCs with increasing plate velocity. In any case, SSC results in uplift of the isotherm 1573 K by up to 20 km relative to its initial equilibrium depth at the impact point.
ISSN: 0956-540X

hal-00856763
https://hal.archives-ouvertes.fr/hal-00856763
DOI : 10.1093/gji/ggt128

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Sedimentary rocks and detrital minerals sample large areas of the continental crust, and they are increasingly seen as a reliable archive for its global evolution. This study presents two approaches to model the growth of the continental crust through the sedimentary archive. The first builds on the variations in U-Pb, Hf and O isotopes in global databases of detrital zircons. We show that uncertainty in the Hf isotope composition of the mantle reservoir from which new crust separated, in the 176Lu/177Hf ratio of that new crust, and in the contribution in the databases of zircons that experienced ancient Pb loss(es), adds some uncertainty to the individual Hf model ages, but not to the overall shape of the calculated continental growth curves. The second approach is based on the variation of Nd isotopes in 645 worldwide fine-grained continental sedimentary rocks with different deposition ages, which requires a correction of the bias induced by preferential erosion of younger rocks through an erosion parameter referred to as K. This dimensionless parameter relates the proportions of younger to older source rocks in the sediment, to the proportions of younger to older source rocks present in the crust from which the sediment was derived. We suggest that a Hadean/Archaean value of K = 1 (i.e., no preferential erosion), and that post-Archaean values of K = 4–6, may be reasonable for the global Earth system. Models built on the detrital zircon and the fine-grained sediment records independently suggest that at least 65% of the present volume of continental crust was established by 3 Ga. The continental crust has been generated continuously, but with a marked decrease in the growth rate at ~ 3 Ga. The period from > 4 Ga to ~ 3 Ga is characterised by relatively high net rates of continental growth (2.9–3.4 km3 yr− 1 on average), which are similar to the rates at which new crust is generated (and destroyed) at the present time. Net growth rates are much lower since 3 Ga (0.6–0.9 km3 yr− 1 on average), which can be attributed to higher rates of destruction of continental crust. The change in slope in the continental growth curve at ~ 3 Ga is taken to indicate a global change in the way bulk crust was generated and preserved, and this change has been linked to the onset of subduction-driven plate tectonics. At least 100% of the present volume of the continental crust has been destroyed and recycled back into the mantle since ~ 3 Ga, and this time marks a transition in the average composition of new continental crust. Continental crust generated before 3 Ga was on average mafic, dense, relatively thin (< 20 km) and therefore different from the calc-alkaline andesitic crust that dominates the continental record today. Continental crust that formed after 3 Ga gradually became more intermediate in composition, buoyant and thicker. The increase in crustal thickness is accompanied by increasing rates of crustal reworking and increasing input of sediment to the ocean. These changes may have been accommodated by a change in lithospheric strength at around 3 Ga, as it became strong enough to support high-relief crust. This time period therefore indicates when significant volumes of continental crust started to become emergent and were available for erosion and weathering, thus impacting on the composition of the atmosphere and the oceans.
ISSN: 0037-0738

hal-01622696
https://hal.archives-ouvertes.fr/hal-01622696
DOI : 10.1016/j.sedgeo.2017.06.001