Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Propagation energies for five examples of deformation bands in porous sandstones from four field sites in Nevada, Utah, and France were calculated by using the J-integral approach. Pure compaction bands that accommodate primarily closing displacements from the Valley of Fire (Nevada) site have a closing-mode band propagation energy of J I = 5.5 ± 1.6 kJ/m2. Shear-enhanced compaction bands having subequal amounts of normal (closing) and shear strains across them from the same site have propagation energies of J I = 6.11 ± 1.8 kJ/m2 and J II = 1.52 ± 0.5 kJ/m2 for closing and shearing modes respectively. Closing- and shearing-mode band propagation energies for shear-enhanced compaction bands from the Buckskin Gulch (Utah) site, 5.63 ± 1.7 and 1.91 ± 0.57 kJ/m2 and the Uchaux (France) site, 11.0 ± 3.3 and 2.35 ± 0.7 kJ/m2 respectively are comparable to the values for similar structures from the Valley of Fire site. Cataclastic deformation bands at the Orange (France) site accommodate significantly larger values of shear offset than do shear-enhanced compaction bands, with a ratio of shear to closing offset that exceeds 7. The calculated closing- and shearing-mode propagation energies for these shear bands, 17.8 ± 5.4 and 3.3 ± 1.0 kJ/m2 respectively are comparable to those for pure or shear-enhanced compaction bands deformed at approximately the same depth of burial. Strain softening of cataclastic compactional shear bands implies unstable shearing, whereas stable and perhaps strain-hardening shearing may be inferred for shear-enhanced compaction bands. Displacement-length scaling relations for shear-enhanced compaction bands of the form D∝L are consistent with the results and with suggestions of band thickening during growth obtained from bifurcation analyses and with field observations of shear zones in porous host rock.
ISSN: 0376-9429

hal-00750341
https://hal.archives-ouvertes.fr/hal-00750341
DOI : 10.1007/s10704-012-9730-2

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Extensional fault systems in the Earth's crust can exhibit two end-member geometries that we identify as distributed and localized faulting regimes. A satellite image analysis of fault populations from the Main Ethiopian Rift-Afar area reveals that the rift architecture contains these two faulting regimes. The occurrence of these regimes reveals a jump in the scale of fault segmentation and linkage. Strain localization at rift border zones exhibits particularly large-scale fault linkage and a power law size distribution. This regime replaces prior distributed fault systems, showing small-scale fault linkage and an exponential size distribution. The distributed faulting is interpreted as confined to the thick trap basalt carapace. We show that continental fault systems can develop by a combination of these two geometries, and we demonstrate how to quantitatively decipher the jump between them.
ISSN: 0278-7407

hal-00411147
https://hal.archives-ouvertes.fr/hal-00411147
DOI : 10.1029/2007TC002148

Éditeur(s) : HAL CCSD Elsevier
Résumé : Displacement-length data from faults, joints, veins, igneous dikes, shear deformation bands, and compaction bands define two groups. The first group, having a power-law scaling relation with a slope of n = 1 and therefore a linear dependence of maximum displacement and discontinuity length (D-max = gamma L), comprises faults and shear (non-compactional or non-dilational) deformation bands. These shearing-mode structures, having shearing strains that predominate over volumetric strains across them, grow under conditions of constant driving stress, with the magnitude of near-tip stress on the same order as the rock's yield strength in shear. The second group, having a power-law scaling relation with a slope of n = 0.5 and therefore a dependence of maximum displacement on the square root of discontinuity length (D-max = alpha L-0.5), comprises joints, veins, igneous dikes, cataclastic deformation bands, and compaction bands. These opening- and closing-mode structures grow under conditions of constant fracture toughness, implying significant amplification of near-tip stress within a zone of small-scale yielding at the discontinuity tip. Volumetric changes accommodated by grain fragmentation, and thus control of propagation by the rock's fracture toughness, are associated with scaling of predominantly dilational and compactional structures with an exponent of n = 0.5.
ISSN: 0191-8141

hal-00411173
https://hal.archives-ouvertes.fr/hal-00411173
DOI : 10.1016/j.jsg.2008.08.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present field data from segmented normal faults having particular displacement and overlapping geometries that may be related to down-dip branching of the fault segments. Based on a 3-D numerical modeling study of computed displacement and stress fields around different geometries of down-dip branched normal fault segments, we show that the bends of fault surfaces that coalesce at depth exert a significant influence on (I) the displacement distribution on the fault segment branches and (2) the quasi-static stress fields around the relay zones. The asymmetry in the displacement profiles and low fault interaction at relay zones modeled are consistent with the fault segment geometries observed in field data. As an application, we model the geometry and interaction of the Vallo di Diano normal fault which is segmented at the Earth's surface and which produced an earthquake of magnitude 6.4 along a single fault surface at depth. Numerical modeling of the segmented fault produces an asymmetric displacement profile and low shear stress at the relay zone consistent with the profile and fault interaction inferred from the held. We conclude that asymmetry of the displacement profile and large overlap/separation ratio of the unlinked relay zone can be indicators of the presence of a continuous fault surface underneath. These geometrical attributes are therefore important to consider in the probabilistic analysis of seismic hazard along segmented normal faults.
ISSN: 0191-8141

hal-00411161
https://hal.archives-ouvertes.fr/hal-00411161
DOI : 10.1016/j.jsg.2008.07.005