Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Mediterranean geodynamic system is an exceptional natural laboratory to study the complexities of back-arc extension during subduction rollback. Corsica is a key locality that recorded the Alpine subduction-collision history followed by 30 Ma of the Apennines slab rollback, responsible for the successive opening, from West to East, of the Liguro-Provençal basin and the Tyrrhenian Sea. The overall strain pattern of the Alpine metamorphic units of Alpine Corsica is studied through a synthesis of i) available geological maps, ii) geochronological data and iii) newly acquired structural data relative to successive events of ductile and brittle extension, Three main stages of extension are recorded: 1/ Syn-metamorphic Oligocene extension accommodated by N140° trending ductile shear zones, that correspond to the reactivation of a major Alpine thrust; 2/ Burdigalian ramp-flat extension with N60°-70° trending fault zones that controlled the deposition of onshore piggy-back basins (e.g. St Florent basin), and 3/ Serravalian N-S trending fault zones. From a geodynamical point of view, these successive extensional deformations in Alpine Corsica can be correlated to the history of the Apennines slab rollback. The two first stages are related to a southeastward rollback of the Appennines slab that successively triggered: 1/ Continental rifting in Oligocene leading to the opening of the Liguro-Provençal basin and 2/ Burdigalian extension with N60°-70° trending fault zone, oblique to the Alpine thrust that, after a counterclockwise rotation of the Corso-Sardinian block, became unable to accommodate extension. Finally, the third stage that gave NS-trending fault zones developed in Serravalian, at the onset of Tyrrhenian rifting, related to an eastward rollback of the Apennines slab, as a response of slab tearing in Sicily.
ISSN: 0040-1951

insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859/document
https://hal-insu.archives-ouvertes.fr/insu-01424859/file/gueydan-tectonoph-2017.pdf
DOI : 10.1016/j.tecto.2016.12.028

Éditeur(s) : HAL CCSD
Résumé : International audience
Aegean extension is a process driven by slab rollback that since 45 Ma shows a two-stage evolution. From 45 to13 Ma it is accommodated by localized deformation leading to i) the exhumation of high-pressure metamorphicrocks from mantle to crustal depths, ii) the exhumation of high-temperature rocks in core complexes and iii) thedeposition of Paleogene sedimentary basins. Since 13 Ma, extension is distributed over the whole Aegean domaingiving a widespread development of onshore and offshore Neogene sedimentary basins. The 3D reconstruction atAegean scale of this two-stage evolution shows that the rate of trench retreat was around 0.6 cm/y during the first30 My and then accelerated up to 3.2 cm/y during the last 13 My. Using available tomographic evidence, timingof metamorphic and sedimentary processes, paleomagnetic data and geometry and kinematics of deformation, wepropose that the sharp transition in trench retreat and deformation mode, localized vs distributed, at 13 Ma wascontrolled to slab tearing. Moreover, the development of dextral NE-SW strike-slip faults and related pull-apartbasins in the North Aegean domain, from the Cyclades to the Rhodope, strongly suggests that this sharp transitionalso corresponds to the onset of Anatolia westward escape.
Geophysical Research Abstracts
Vienne, Austria

insu-01137631
https://hal-insu.archives-ouvertes.fr/insu-01137631

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Deciphering Variscan versus Alpine history in the internal Rif system is a key to constraining the tectonic evolution of the Alboran domain and hence the geodynamics of the western Mediterranean system during the Cenozoic. This study focuses on the evolution of the metamorphic envelope of the Beni Bousera massif and its relation to the underlying peridotites. Combining structural geology, metamorphic petrology, and LA-ICP-MS U-Th-Pb dating of monazite, this study contributes to the understanding of the tectonic history of the western internal Rif. The regional foliation (S2) is characterized by LP/HT mineral assemblages and obliterates a former foliation (S1) developed along a barrovian (MP/MT) metamorphic gradient. The dating of some metamorphic monazite grains from a micaschist and a migmatitic gneiss demonstrates that the crustal envelope of the peridotite recorded two distinct tectonometamorphic episodes. Data from monazite inclusions in S1 garnet suggest that the first event, D1, is older than 250-170 Ma and likely related to the Variscan collision, in agreement with the barrovian type of the metamorphic gradient. The second event, D2, is Alpine in age (at circa 21 Ma) and corresponds to a strong lithosphere thinning allowing subsequent subcontinental mantle exhumation. Such a tectonic context provides an explanation for the LP/HT metamorphic gradient that is recorded in the regional foliation of the western Betic-Rif system. This extension is probably related to a subduction slab roll-back in the western end of the Mediterranean realm during the Oligo-Miocene times. No evidences for a Tertiary HP/LT metamorphism have been identified in the studied area
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
insu-01152517
https://hal-insu.archives-ouvertes.fr/insu-01152517
https://hal-insu.archives-ouvertes.fr/insu-01152517/document
https://hal-insu.archives-ouvertes.fr/insu-01152517/file/gueydan-2015.pdf
DOI : 10.1002/2014TC003769

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Highly restitic rocks from the Antananarivo Block in northern Madagascar are investigated in this study in order to unravel processes of H2O-rich biotite formation in HT rocks. Polyphase metamorphism and melt migration occurred at 0.6 GPa and 850 °C. Biotite remains stable together with orthopyroxene and makes up to 45 vol% of the rock. In addition, three well-characterised and delimited microdomains having different textural, chemical and petrological characteristics are preserved. Thermodynamic models using the specific bulk compositions of the domains are in agreement with petrological observations. These rocks provide evidence that the lower crust may be strongly heterogeneous, locally associated to the formation of hydrous restites controlled by episodes of melt production and melt escape. This has significant consequences for understanding of the lower crust.
ISSN: 1437-3254

hal-01356313
https://hal.archives-ouvertes.fr/hal-01356313
DOI : 10.1007/s00531-015-1265-0

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Ronda peridotite supplies one of the best objects to document subcontinental mantle deformation, but its internal deformation and exhumation mechanisms remain controversial. Here we provide new structural data and numerical results that constrain the Oligocene-Miocene deformation history of the Ronda massif. We first describe a mantle shear zone in the northern massif that developed subcrustal strain localization during decompression and related partial melting. The deformation regime of this mantle shear zone evolved from penetrative NE-SW stretching to sinistral shear highlighted by discrete shear bands. We then show structural observations that document a viscous deformation in the southern massif occurring prior to the thrust-assisted emplacement of the peridotite during large decompression. Finally, we performed numerical investigations that quantify a high temperature of 980°C for the basal peridotite lens at the time of its crustal emplacement. Our numerical results constrain the timing of ductile deformation of the peridotite just before 22 Ma, probably between 30 and 22 Ma. Altogether, these features led us to conclude that the deformation and exhumation of the Ronda peridotite results from lithosphere thinning subsequently inverted in the course of the Oligocene-Miocene. Among available models, our findings support the hypothesis of peridotite exhumation by the inversion of a thinned back-arc continental lithosphere during westward slab rollback through the Alboran region.
ISSN: 0278-7407

insu-00924180
https://hal-insu.archives-ouvertes.fr/insu-00924180
https://hal-insu.archives-ouvertes.fr/insu-00924180/document
https://hal-insu.archives-ouvertes.fr/insu-00924180/file/tect20062.pdf
DOI : 10.1002/tect.20062

Éditeur(s) : HAL CCSD
Résumé : International audience
The Aegean domain is a key area for understanding the processes of back-arc extension. Observed deformation pattern and present day kinematics result from the interaction between the southward retreat of the Hellenic trench and the westward escape of Anatolia. Using laboratory experiments designed to study lithosphere-scale deformation, we show that the overall pattern of Aegean extension requires not only the combination of trench retreat and Anatolia escape since 15 Ma but also the presence of an inherited lithosphere-scale mechanical discontinuity: the Vardar Suture Zone (VSZ). The reactivation in dextral shear of the eastern branch of the VSZ accommodates both the trench retreat (NS stretching) and the westward escape of Anatolia (EW shortening) in the Cyclades area since 15 Ma. Additionally, our model shows that the North Anatolian Fault (NAF) is a late structure in the evolution of the Aegean, initiated 10 Ma after the onset of Anatolia escape. The model displays displacement sub-domains, which result from strain partitioning instead of being “rigid microplates”, directly comparable to the present-day displacement field (GPS) of the Aegean and western Anatolia. Our modelling provides a simple way to look at the dynamics of Aegean extension in two main stages. From middle Eocene to middle Miocene, extension was only driven by the southward retreat of the Hellenic trench at a rate lower than 1 cm.y-1. Since middle Miocene, the combination of slab rollback with Anatolia westward escape, resulted in a southwest direction of trench retreat, with an accelerating rate of up to 3 cm.y-1.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242045
https://hal-insu.archives-ouvertes.fr/insu-01242045

Éditeur(s) : HAL CCSD
Résumé : International audience
EGU General Assembly
Vienne, Austria

insu-01091969
https://hal-insu.archives-ouvertes.fr/insu-01091969

Éditeur(s) : HAL CCSD
Résumé : International audience
Two opposing visions of the Aegean backarc tectonics implicitly contain contrasting images of the rheological behaviour of the lihosphere, supported by different sets of observations. The propagation of the NAF and extension in the Corinth Rift suggest a strongly localising rheology whereas the formation of MCC in the Cyclades and the Rhodope suggests instead a more viscous behaviour. This paradox was the seminal question addressed by the ANR-EGEO programme (2007-2010) that leads to the following conclusions: (1) The exhumation of the Cycladic MCC's is accommodated by the N-dipping North Cycladic Detachment System (NCDS) that partly reworks the Vardar suture and at the base by a series of thrusts, including the basal contact of the Cycladic Blueschists (CBS) over the Cycladic Basement (CB). The activity of LANF is due to the reactivation of pre-existing discontinuities such as thrusts or earlier detachments and much less to the interaction with granitic plutons. (2) Exhumation in the Cyclades has proceeded in two stages: (a) Eocene syn-orogenic exhumation within the subduction lower/upperplate interface while the post-orogenic Rhodope MCC formed further north, (b) Oligo-Miocene post-orogenic extension in an MCC mode coeval with syn-orogenic exhumation in Crete and the Peloponnese. (3) Both stages were associated with slab retreat, as early as the Eocene with an acceleration at 30-35 Ma. (4) The localisation of the presently active steeply-dipping normal faults on the southern margin of the Corinth Rift may have been preceded by a partial reworking of thrusts and syn-orogenic detachments by shallow-dipping decollements. (5) The localisation of the NAF in the Marmara Sea region and the Northern Aegean Sea is now accurately dated between 5.3 and 5 Ma Ma using the erosion and deposition surfaces that mark the Messinian salinity Crisis and nannofossils ages. (6) The formation of MCCs in the Cyclades resulted in the draining of the low viscosity lower crust from the northern Aegean Sea and led to an easier coupling between upper mantle and upper crust, easing the localisation and propagation of the NAF. (7) A comparison between crustal and mantle finite strain suggests that mantle flow due to slab retreat controls the stretching of the crust. Our model involves progressive slab retreat and mantle flow below the overriding plate inducing the observed succession of tectonic episodes with a progressive localisation of extension due to several slab tearing events. There is no paradox in the tectonic history and rheological behaviour of the Aegean lithosphere but an evolution of the kinematic boundary conditions due to slab deformation at depth.
American Geophysical Union
San Francisco, United States

insu-00860518
https://hal-insu.archives-ouvertes.fr/insu-00860518
BIBCODE : 2010AGUFM.T13G..04J

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analogue and numerical models have shown that the strength of the lithospheric mantle controls the mode of lithosphere deformation. In extension, the presence or absence of a high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysical data question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling to quantify the impact of a ductile localizing mantle - instead of brittle - in triggering continental rifting. As a novelty, the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction, which may promote a significant strength drop and subsequent strain localization at low mantle temperature (< 700-800 °C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting that mainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. A medium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding to narrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductile localizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at large strain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting, although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geological and mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustal faulting that are commonly observed in nature.
ISSN: 0040-1951

Droits : info:eu-repo/semantics/OpenAccess
insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254/document
https://hal-insu.archives-ouvertes.fr/insu-00924254/file/Gueydan_precigout_2014_Tectonophysics.pdf
DOI : 10.1016/j.tecto.2013.11.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The identification of the structures and deformation patterns in magma-poor continental rifted margins is essential to characterize the processes of continental lithosphere necking. Brittle faults, often termed mantle detachments, are believed to play an essential role in the rifting processes that lead to mantle exhumation. However, ductile shear zones in the deep crust and mantle are rarely identified and their mechanical role remains to be established. The western Betics (Southern Spain) provides an exceptional exposure of a strongly thinned continental lithosphere, formed in a supra-subduction setting during Oligocene-Lower Miocene. A full section of the entire crust and the upper part of the mantle is investigated. Variations in crustal thickness are used to quantify crustal stretching that may reach values larger than 2000% where the ductile crust almost disappear, defining a stage of hyper-stretching. Opposite senses of shear top-to-W and top-to-E are observed in two extensional shear zones located close to the crust-mantle boundary and along the brittle-ductile transition in the crust, respectively. At locations where the ductile crust almost disappears, concordant top-to-E-NE senses of shear are observed in both upper crust and serpentinized mantle. Late high-angle normal faults with ages of ca. 21 Ma or older (40Ar/39Ar on white mica) crosscut the previously hyper-stretched domain, involving both crust and mantle in tilted blocks. The western Betics exemplifies, probably better than any previous field example, the changes in deformation processes that accommodate the progressive necking of a continental lithosphere. Three successive steps can be identified: i/a mid-crustal shear zone and a crust-mantle shear zone, acting synchronously but with opposite senses of shear, accommodate ductile crust thinning and ascent of subcontinental mantle; ii/hyper-stretching localizes in the neck, leading to an almost disappearance of the ductile crust and bringing the upper crust in contact with the subcontinental mantle, each of them with their already acquired opposite senses of shear; and iii/high-angle normal faulting, cutting through the Moho, with related block tilting, ends the full exhumation of the mantle in the zone of localized stretching. The presence of a high strength sub-Moho mantle is responsible for the change in sense of shear with depth. Whereas mantle exhumation in the western Betics occurred in a backarc setting, this deformation pattern controlled by a high-strength layer at the top of the lithosphere mantle makes it directly comparable to most passive margins whose formation lead to mantle exhumation. This unique field analogue has therefore a strong potential for the seismic interpretation of the so-called “hyper-extended margins”.
ISSN: 0264-8172

insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895/document
https://hal-insu.archives-ouvertes.fr/insu-01310895/file/Frasca-MarPetGeol-2016.pdf
DOI : 10.1016/j.marpetgeo.2016.04.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017

Éditeur(s) : HAL CCSD
Résumé : International audience
The Alboran Domain, situated at the western end of the Mediterranean subduction system, is characterized by theRonda Peridotites, one of the world largest exposures of sub-continental mantle. Using U-Pb (LA-ICP-MS) and Ar-Ar dating, we precisely dated two tectonic events associated with the Tertiary exhumation of the Ronda Peridotites.First, shearing along the Crust-Mantle Extensional Shear Zone caused, at ca. 22.5 Ma, mantle exhumation, localpartial melting in the deep crust and coeval cooling in the upper crust. Second, the Ronda Peridotites Thrusttriggered the final crustal emplacement of the peridotites onto the continental crust at ca. 21 Ma, as testified bygranitic intrusions in the thrust hanging-wall. The tectonic evolution of the western Alboran Domain is thereforecharacterized by a fast switch from a continental lithosphere extension in a backarc setting, with sub-continentalmantle exhumation, to a rift inversion by thrusting driven by shortening of the subduction upper plate
European Geosciences Union General Assembly 2017
Vienne, Austria

insu-01510393
https://hal-insu.archives-ouvertes.fr/insu-01510393

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The initiation and subsequent evolution of intra-plate orogens, resulting from continental plate interior deformation due to transmission of stresses over large distances from the active plate boundaries, is controlled by lateral and vertical strength contrasts in the lithosphere. We present lithospheric-scale analogue models combining 1) lateral strength variations in the continental lithosphere, and 2) different vertical rheological stratifications. The experimental continental lithosphere has a four-layer brittle–ductile rheological stratification. Lateral heterogeneity is implemented in all models by increased crustal strength in a central narrow block. The main investigated parameters are strain rate and strength of the lithospheric mantle, both playing an important role in crust–mantle coupling. The experiments show that the presence of a strong crustal domain is effective in localizing deformation along its boundaries. After deformation is localized, the evolution of the orogenic system is governed by the mechanical properties of the lithosphere such that the final geometry of the intra-plate mountain depends on the interplay between crust–mantle coupling and folding versus fracturing of the lithospheric mantle. Underthrusting is the main deformation mode in case of high convergence velocity and/or thick brittle mantle with a final asymmetric architecture of the deep lithosphere. In contrast, lithospheric folding is dominant in case of low convergence velocity and low strength brittle mantle, leading to the development of a symmetric lithospheric root. The presented analogue modelling results provide novel insights for 1) strain localization and 2) the development of the asymmetric architecture of the Pyrenees.
ISSN: 0012-821X

hal-01243577
https://hal.archives-ouvertes.fr/hal-01243577
DOI : 10.1016/j.epsl.2015.05.022