Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Mechanical forces influence the growth and shape of virtually all tissues and organs. Recent studies show that increased cell contractibility, growth and differentiation might be normalized by modulating cell tensions. Particularly, the role of these tensions applied by the extracellular matrix during liver fibrosis could influence the hepatocarcinogenesis process. The objective of this study is to determine if 3D stiffness could influence growth and phenotype of normal and transformed hepatocytes and to integrate extracellular matrix (ECM) stiffness to tensional homeostasis. We have developed an appropriate 3D culture model: hepatic cells within three-dimensional collagen matrices with varying rigidity. Our results demonstrate that the rigidity influenced the cell phenotype and induced spheroid clusters development whereas in soft matrices, Huh7 transformed cells were less proliferative, well-spread and flattened. We confirmed that ERK1 played a predominant role over ERK2 in cisplatin-induced death, whereas ERK2 mainly controlled proliferation. As compared to 2D culture, 3D cultures are associated with epithelial markers expression. Interestingly, proliferation of normal hepatocytes was also induced in rigid gels. Furthermore, biotransformation activities are increased in 3D gels, where CYP1A2 enzyme can be highly induced/activated in primary culture of human hepatocytes embedded in the matrix. In conclusion, we demonstrated that increasing 3D rigidity could promote proliferation and spheroid developments of liver cells demonstrating that 3D collagen gels are an attractive tool for studying rigidity-dependent homeostasis of the liver cells embedded in the matrix and should be privileged for both chronic toxicological and pharmacological drug screening.
ISSN: 0730-2312

hal-01196600
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01196600
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01196600/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01196600/file/Increasing%203D%20Matrix%20Rigidity_accepted.pdf
DOI : 10.1002/jcb.25356

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
CMAS 3D, developed in MATLAB (R), is a program to support visualization of major element chemical data in three dimensions. Such projections are used to discuss correlations, metamorphic reactions and the chemical evolution of rocks, melts or minerals. It can also project data into 2D plots. The CMAS 3D interface makes it easy to use, and does not require any knowledge of Matlab (R) programming. CMAS 3D uses data compiled in a Microsoft Excel (TM) spreadsheet. Although useful for scientific research, the program is also a powerful tool for teaching.
ISSN: 0098-3004

hal-00413570
https://hal.archives-ouvertes.fr/hal-00413570
DOI : 10.1016/j.cageo.2008.07.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : A synthesis of backscatter imagery coupled with a large 3D seismic dataset in the Lower Congo Basin (LCB) reveals a patchy distribution of features interpreted to be associated with fluid seepage from 300 m to 2500 m water depth. With the exception of one region of anomalous backscatter positive-relief mounds, all inferred seep sites occur in negative-relief pockmarks. The extensive 3D seismic dataset in the LCB offers a unique opportunity to study the plumbing system that is feeding surface cold seep systems, and in general, to reconstruct the relationship between tectonics and fluid flow in continental margins. The fluid seeps in the LCB are associated with morphologically, stratigraphically or tectonically controlled focused fluid flow. The integration of the geophysical datasets, backscatter imagery coupled to 3D seismic, clearly indicates that fluid seeps are not randomly distributed, but their seabed organization reflects 1) the location of the underlying structure (reservoir or trap) where the fluids are coming from, 2) the geometry and morphology of the reservoir/trap, and 3) the discontinuities in the sedimentary column along which fluids have migrated. In the LCB seafloor pockmarks are always associated with underlying tectonic structures (fault zones, salt diapirs, polygonal faults) or buried sedimentary bodies (turbiditic channels, erosional surfaces), whereas they never occur above sub-horizontal parallel-stratified fine-grained sediments. Even if triggering processes can not be clearly defined here, we propose a model of seafloor fluid seep organization, which represents a new tool for identifying the geometry of flow pathways and the underlying buried bodies where the fluids are originating from. This qualitative 3D model provides insight into the geohydrologic processes of continental margins.
ISSN: 0025-3227

hal-00406640
https://hal.archives-ouvertes.fr/hal-00406640
DOI : 10.1016/j.margeo.2007.06.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Absolute earthquake hypocenter locations have been determined in the area offshore eastern Taiwan, at the Southernmost Ryukyu subduction zone. Location process is run within a 3D velocity model by combining the Taiwanese and neighboring Japanese networks and using the 3D MAXI technique. The study focuses on the most active seismic cluster in the Taiwan region that occurs in the forearc domain offshore eastern Taiwan. Earthquakes distribute mainly along 2 active planes. The first one aligns along the subduction interface and the second one, shallower affects the overriding margin. Focal mechanisms within the shallow group indicate that nodal planes are either compatible with high-angle back-thrusts or low-angle thrusts. The active seismic deformation exclusively indicates reverse faulting revealing that the forearc basement undergoes trench-perpendicular strong compression. By integrating the seismological image into the regional context, we favor the hypothesis in which the dense seismicity occurring offshore marks the activity of en-échelon high-angle reverse faults accommodating the uplift of a broken piece of Ryukyu Arc basement, called Hoping Basement Rise. The uplift is inferred to be caused by the subduction of an oceanic relief, either exotic block, seamount or oceanic crust sliver. Our favored solution satisfies the narrowness of epicenter's cluster along the Hoping Canyon, and the observation of high-angle active faults on seismic lines crossing the area. Furthermore, this solution is compatible with the active uplift of the Hoping Rise demonstrated from morphological and sedimentological data. We do not exclude the branching of the high-angle reverse faults system onto a splay fault connected with the subduction interface but further investigations are needed to map precisely the 3D distribution of active faults that break the margin.
ISSN: 0040-1951

hal-00407726
https://hal.archives-ouvertes.fr/hal-00407726
DOI : 10.1016/j.tecto.2007.11.018

Éditeur(s) : HAL CCSD
Résumé : The purpose of this work is to specify the deformation offshore East of Taiwan by characterizing major active faults in particular at the level of the Ryukyu forearc. The major problem associated with the study of this region is that earthquakes are located outside the permanent networks. Consequently, this led to some unprecise earthquake locations limiting tectonic and statistical analyses, and therefore the correct estimation of the seismic hazard. This work is included in the project ANR ACTS (Active Tectonics and Seismic Hazard in Taiwan). To achieve this goal, we worked on three different timescales for which a different localization method has been proposed to obtain a clear image of seismic deformation and highlight major faults offhore East of Taiwan. First, at the scale of the century (from the analysis of a seismicity catalogue with homogeneous magnitude), the instrumental historical earthquakes (1897-2007) show that the Ryukyu margin was affected by 6 earthquakes of magnitude greater than 7 with 4 of them for which the responsible fault is unknown. We propose a method of relative location to relocate the historic events from the time difference of P and S arrival times (Ts-Tp) at each station. The location is obtained by searching for "analogue" earthquakes in the recent instrumental catalogue (1991-2008) for which Ts-Tp at each station is close. This method has been applied to the largest (in terms of magnitude) earthquake ever recorded in Taiwan, the earthquake of June 5, 1920 (M7.7 +/- 0.2). A rupture along the interplate of the Ryukyu subduction with a possible nucleation at the downdip limit of a splay-fault is certainly responsible of this earthquake. Then, at the scale of the decade, the improvement of the method of absolute location based on MAXimum of Intersection of EDT (MAXI, EDT: Equal Differential Time) allows to better extract the erroneous arrival times and prevents the "trade-off" between depth and origin time, and between depth and epicentral position when the azimuthal coverage is low (gap Azimuthal > 180degre). Synthetic tests show the effectiveness of MAXI (using P-wave only) to determine the parameters x, y and z even when the azimuthal gap is important. In the latter case, the quality of the results is dependent on the velocity model to represent the 3D structure of the Earth. We propose an approach involving the use of a 3D a priori P-wave velocity model to locate earthquakes which are lateral and remote to the seismic network. An application to the case of Taiwan and Ecuador validates this approach. Finally, at the level of a few months, the marine geophysical campaign RATS (Ryukyu Arc: Tectonics and Seismology) was conducted in two stages. A passive seismology experiment from July to October, 2008 (RATS1) has been conducted over the forearc of the Ryukyus and then active seismic experiment (refraction and reflection) was conducted in May 2009 in a NNE - SSW line through the Ryukyu margin. These two combined experiments allow improving our knowledge about the crustal structure of the margin. At the level of the forearc, the basement of the forearc is characterized by vertical backstop and a very deformed basis certainly associated with a significant out of sequence deformation. In depth, the downgoing plate is certainly affected by a tear that controls the seismicity in the region of transition between the subduction and collision.
Le but de ce travail est de préciser la déformation en mer à l'est de Taïwan et de notamment caractériser les failles actives majeures en particulier au niveau de l'avant-arc des Ryukyus. Le problème majeur associé à l'étude de cette région est que les séismes sont localisés en dehors des réseaux permanents et que cela conduit à des localisations peu précises limitant les analyses statistiques, tectoniques et donc l'estimation correcte de l'aléa sismique. Ce travail est inclus dans le projet ANR ACTS (Active Tectonics and Seismic Hazard in Taiwan). Pour atteindre cet objectif, nous travaillons à trois échelles de temps différentes pour lesquelles une méthode de localisation différente a été proposée pour obtenir une image précise de la déformation sismique et mettre en évidence les failles majeures en mer à l'est de Taïwan. D'abord, à l'échelle du siècle (à partir de l'analyse d'un catalogue de sismicité homogène en magnitude), les séismes historiques instrumentaux (1897-2007) montrent que la marge des Ryukyus a été affectée par 6 séismes de magnitude supérieure à 7 dont 4 pour lesquels la faille responsable n'est pas connue. Nous proposons une méthode de localisation relative qui permet de relocaliser les évènements historiques à partir des différences de temps d'arrivées P et S (Ts-Tp) à chaque station. La localisation est obtenue en recherchant les séismes analogues dans le catalogue instrumental récent (1991-2008) pour lesquels Ts-Tp à chaque station est proche. Cette méthode a été appliquée au plus gros séisme (en terme de magnitude) jamais enregistré à Taïwan, le séisme du 5 juin 1920 (M7.7 $pm$ 0.2). Ce séisme a certainement pour origine une rupture sur l'interplaque sismogène de la subduction des Ryukyus avec une possible nucléation à la base d'une faille hors-séquence. Ensuite, à l'échelle de la dizaine d'années, l'amélioration de la méthode de localisation absolue du MAXimum d'Intersection EDT (MAXI, EDT: Equal Differential Time) permet de mieux extraire les temps d'arrivées erronés et empêche les "trade-off" entre profondeur et temps d'origine et, entre profondeur et position épicentrale lorsque la couverture azimutale est faible (gap azimutal > 180°). Des tests synthétiques montrent l'efficacité de MAXI (en utilisant les ondes P uniquement) à déterminer les paramètres x, y et z même lorsque le gap azimutal est important. Dans ce dernier cas, la qualité des résultats reste dépendant du modèle de vitesse à représenter la structure 3D de la Terre. Nous proposons une démarche associant l'utilisation d'un modèle de vitesse des ondes P 3D a priori avec la méthode MAXI pour localiser les séismes qui sont latéraux et éloignés du réseau. Une application au cas de Taïwan et en Équateur valide cette approche. Enfin, à l'échelle de quelques mois, la campagne de géophysique marine RATS (Ryukyu Arc: Tectonics and Seismology) a été menée en deux temps. Une expérience de sismologie passive de juillet à octobre 2008 (RATS1) a été menée au-dessus de l'avant-arc des Ryukyus puis une expérience de sismique active (réfraction et réflexion) a été menée en mai 2009 sur une ligne NNE-SSW à travers la marge des Ryukyus. Ces deux expériences combinées permettent d'améliorer notre connaissance de la structure crustale de la marge. Au niveau de l'avant-arc, le socle de l'avant-arc est caractérisé par une extrémité formant un butoir vertical et une base très déformée certainement associée à une importante déformation hors-séquence. En profondeur, la plaque plongeante est certainement affectée par une déchirure qui contrôle la sismicité dans cette région de transition entre la subduction et la collision.
https://tel.archives-ouvertes.fr/tel-00660737

tel-00660737
https://tel.archives-ouvertes.fr/tel-00660737
https://tel.archives-ouvertes.fr/tel-00660737/document
https://tel.archives-ouvertes.fr/tel-00660737/file/Thesis_small.pdf

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Ro 31-8220 is a potent protein kinase C (PKC) inhibitor belonging to the chemical class of bisindolylmaleimides (BIMs). Various PKC-independent effects of Ro 31-8220 have however been demonstrated, including inhibition of the ATP-binding cassette drug transporter breast cancer resistance protein. In the present study, we reported that the BIM also blocks activity of the solute carrier organic cation transporter (OCT) 1, involved in uptake of marketed drugs in the liver, in a PKC-independent manner. Ro 31-8220, in contrast to other pan-PKC inhibitors such as staurosporine and chelerythrine, was thus shown to cis-inhibit uptake of the reference OCT1 substrate tetraethylammonium in OCT1-transfected HEK293 cells in a concentration-dependent manner (IC50 = 0.18 μM) and without altering membrane expression of OCT1. This blockage of OCT1 was also observed in human hepatic HepaRG cells that constitutionally express OCT1. It likely occurred through a mixed mechanism of inhibition. Ro 31-8220 additionally trans-inhibited TEA uptake in OCT1-transfected HEK293 cells, which likely discards a transport of Ro 31-8220 by OCT1. Besides Ro 31-8220, 7 additional BIMs, including the PKC inhibitor LY 333531, inhibited OCT1 activity, whereas 4 other BIMs were without effect. In silico analysis of structure-activity relationships next revealed that various molecular descriptors, especially 3D-WHIM descriptors related to total size, correspond to key physico-chemical parameters for inhibition of OCT1 activity by BIMs. In addition to activity of OCT1, Ro 31-8220 inhibited those of other organic cation transporters such as multidrug and toxin extrusion protein (MATE) 1 and MATE2-K, whereas, by contrast, it stimulated that of OCT2. Taken together, these data extend the nature of cellular off-targets of the BIM Ro 31-8220 to OCT1 and other organic cation transporters, which has likely to be kept in mind when using Ro 31-8220 and other BIMs as PKC inhibitors in experimental or clinical studies
ISSN: 1932-6203

hal-01255837
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01255837
DOI : 10.1371/journal.pone.0144667
PUBMED : 26657401
PUBMEDCENTRAL : PMC4675551

Éditeur(s) : HAL CCSD Société des américanistes
Résumé : International audience
Experimental approach of the pre-Columbian navigation in the Antilles. Understanding the navigation capacities of the Eastern Caribbean pre-Columbian population is crucial for the community working in the Antilles. We have chosen to focus our work on an experimental approach of these techniques. Our ambition was to set up an experimental program including all the aspects associated with the building and the utilization of the kanawa. Thus, we have conducted an ethno-archaeological study of the kanawa building process followed by the Kali'ña from French Guyana. Then, the « Akayouman » kanawa was made into a 3D model to support a hydrostatic analyse. Finally, the heart of the project was composed of gathering and studying the data collected during our expeditions in the kanawa.
La comprensión de las capacidades de navegación de las poblaciones precolombinas del Caribe Oriental es actualmente fundamental para la comunidad que trabaja en las Antillas. Hemos optado por centrar nuestro trabajo en una practica experimental de estas técnicas. Nuestra ambición era crear un programa de experimentación que incluye todos los aspectos asociados a la construcción y la utilización de las kanawa. Por lo tanto, hemos realizado un estudio etnoarqueológica del proceso de construcción de las kanawa seguido por los Kali'na de Guyana Francesa. Entonces, la kanawa « Akayouman » ha sido modelizado en 3D para apoyar un estudio hidrostático. Por fin, el corazón del proyecto está constituido por la recopilación y el estudio de los datos recogidos durante nuestras expediciones .
Devenue plus centrale au cours des dernières années, la question des capacités de navigation des populations amérindiennes n'est pas nouvelle dans l'archéologie antillaise. Nous avons choisi de principalement concentrer nos efforts sur une approche expérimentale de ces techniques. Notre ambition était de mettre en place un programme d'expérimentation prenant en compte les différents aspects liés à la construction et à l'utilisation des kanawa. Nous avons donc mené une étude ethnoarchéologique de la chaîne opératoire de construction des kanawa mise en place par les artisans kali'ña en Guyane française. Puis, une fois produite, la kanawa « Akayouman » a fait l'objet d'une modélisation numérique 3D qui a servi de support à une analyse hydrostatique. Enfin, le coeur du projet a été constitué par la collecte et le traitement des données issues de notre programme de navigation.
ISSN: 0037-9174

hal-01671143
https://hal.univ-antilles.fr/hal-01671143
https://hal.univ-antilles.fr/hal-01671143/document
https://hal.univ-antilles.fr/hal-01671143/file/JSA102_2_20_art_berard2.pdf
DOI : 10.4000/jsa.14843

Éditeur(s) : HAL CCSD Elsevier
Résumé : Remerciements :- Dr. Jacques Delabie- Andrea Yockey-Dejean- Geoff Brown- Jean-Pierre Andrieu
Background: Most ant venoms consist predominantly of small linear peptides, although some contain disulfide linked peptides as minor components. However, in striking contrast to other ant species, some Anochetus venoms are composed primarily of disulfide-rich peptides. In this study, we investigated the venom of the ant Anochetus emarginatus with the aim of exploring these novel disulfide-rich peptides.Methods: The venom peptidome was initially investigated using a combination of reversed-phase HPLC and mass spectrometry, then the amino acid sequences of the major peptides were determined using a combination of Edman degradation and de novo MS/MS sequencing. We focused on one of these peptides, U-1-PONTX-Ae1a (Ae1a), because of its novel sequence, which we predicted would form a novel 3D fold. Ae1a was chemically synthesized using Fmoc chemistry and its 3D structure was elucidated using NMR spectroscopy. The peptide was then tested for insecticidal activity and its effect on a range of human ion channels.Results: Seven peptides named poneritoxins (PONTXs) were isolated and sequenced. The three-dimensional structure of synthetic Ae1a revealed a novel, compact scaffold in which a C-terminal beta-hairpin is connected to the N-terminal region via two disulfide bonds. Synthetic Ae1a reversibly paralyzed blowflies and inhibited human L-type voltage-gated calcium channels (Ca(v)1).Conclusions: Poneritoxins from Anochetus emarginatus venom are a novel class of toxins that are structurally unique among animal venoms.General significance: This study demonstrates that Anochetus ant venoms are a rich source of novel ion channel modulating peptides, some of which might be useful leads for the development of biopesticides.
ISSN: 0304-4165

hal-01511987
https://hal.archives-ouvertes.fr/hal-01511987
https://hal.archives-ouvertes.fr/hal-01511987/document
https://hal.archives-ouvertes.fr/hal-01511987/file/2016_Touchard_Biochimica_Biophysica_%7B4B3BE6A3-AE83-4C6E-B678-BBFB5CC84AF7%7D.pdf
DOI : 10.1016/j.bbagen.2016.07.027

Éditeur(s) : HAL CCSD
Résumé : Different applications of linear elasticity in structural geology are presented in this thesis through the development of three types of numerical computer codes. The first one uses forward modeling to study displacement and perturbed stress fields around complexly faulted regions. We show that incorporating inequality constraints, such as static Coulomb friction, enables one to explain the angle of initiation of jogs in extensional relays. Adding heterogeneous material properties and optimizations, such as parallelization on multicore architectures and complexity reduction, admits more complex models. The second type deals with inverse modeling, also called parameter estimation. Linear slip inversion on faults with complex geometry, as well as paleo-stress inversion using a geomechanical approach, are developed. The last type of numerical computer code is dedicated to restoration of complexly folded and faulted structures. It is shown that this technique enables one to check balanced cross-sections, and also to retrieve fault chronology. Finally, we show that this code allows one to smooth noisy 3D interpreted faulted and folded horizons using geomechanics.
Différentes applications de l'élasticité linéaire en géologie structurale sont présentées dans cette thèse à travers le développement de trois types de codes numériques. Le premier utilise la modélisation directe pour étudier les déplacements et champs de contraintes autour de zones faillées complexes. On montre que l'ajout de contraintes inégalitaires, telles que la friction de Coulomb, permet d'expliquer l'angle d'initiation des dominos dans les relais extensifs. L'ajout de matériaux hétérogènes et d'optimisations, telles la parallélisation sur processeurs multi-coeurs ainsi que la réduction de complexité des modèles, permettent l'étude de modèles beaucoup plus complexes. Le second type de code numérique utilise la modélisation inverse, aussi appelée estimation de paramètres. L'inversion linéaire de déplacements sur les failles ainsi que la détermination de paléo-contraintes utilisant une approche géomécanique sont développées. Le dernier type de code numérique concerne la restauration de structures complexes plissées et faillées. Il est notamment montré qu'une telle méthode permet de vérifier l'équilibre de coupes géologiques, ainsi que de retrouver la chronologie des failles. Finalement, nous montrons que ce même code permet de lisser des horizons 3D faillés, plissés et bruités en utilisant la géomécanique.
https://tel.archives-ouvertes.fr/tel-00537899

tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899/document
https://tel.archives-ouvertes.fr/tel-00537899/file/thesemaerten.pdf

Éditeur(s) : Université Nice Sophia Antipolis
Résumé : The Lesser Antilles is a case study of a very slow subduction (~2 cm/yr) of an old oceanic lithosphere (~84-100 Ma). The region presents a relatively low seismic activity, especially along the interplate contact, and the seismic hazard associated with a possible mega-thrust earthquake is still poorly known. This PhD thesis is a first step toward assessing the ability of the Lesser Antilles subduction zone to produce such a large subduction event. To do so, it aims at constraining the downdip width of the interplate's seismogenic zone. The lack of coverage of permanent seismological stations is a major limitation in the exploration of the Lesser Antilles subduction zone. It is due to the presence of only small aligned islands at far distances from the potentially seismogenic interplate area. Several oceanographic cruises were therefore planned that notably allowed the repeated deployment of ocean bottom seismometers; some of them being left for a few months of background seismicity recording. This thesis specifically focuses on two sets of wide-angle seismic data acquired offshore the Dominica and Martinique islands. From their analysis 3D and 2D tomographic models were produced respectively over the forearc region and across the whole subduction complex. These models constrain the plates' seismic structure as well as their geometry. They allow the discussion of how the imaged structures affect the subduction processes and give a first estimation of the downdip width of the seimogenic zone, defined as the segment of the interplate between the backstop and the upper plate's Moho. The joint interpretation of seismic models and earthquake localizations then refine this first assessment. Epicenter distribution from height months of seismic recording shows indeed that seismicity concentrates within the inner forearc region. The strong velocity gradient that characterize its basement suggests it is denser and more rigid than the more deformable outer forearc basement. The updip limit of the seismogenic zone could then lie arcward of the backstop at the contact of the interplate and the seaward end of the inner forearc crust. At depth, interplate earthquake mechanisms are observed between 35 and 45 km depth and interpreted to have occurred at the downdip limit of the seismogenic zone. The latter could reach a depth over 10,km deeper than the contact of the upper plate's Moho with the interplate, and therefore lie within the mantle wedge. All together, these results imply a large downdip width of the seismogenic zone (~70 km) offshore the Dominica and Martinique islands. Further work is, however, needed in order to fully comprehend the ability of the Lesser Antilles subduction zone to produce a possible mega-thrust earthquake. This would necessitate the evaluation of seismic coupling at the interplate contact and the possible segmentation of the seismogenic zone, for instance, due to the subduction of oceanic ridges.
Les Petites Antilles présentent un contexte géodynamique caractérisé par la subduction à très faible vitesse (~2 cm/an) d'une lithosphère océanique âgée (~84-100 Ma). L'activité sismique y est relativement faible, notamment à l'interplaque, où l'aléa sismique lié à un éventuel séisme de méga-chevauchement reste encore mal contraint. Cette thèse se veut être une première étape dans l'évaluation de la capacité de la zone de subduction des Petites Antilles à générer un tel évènement. Dans ce but, ces travaux tentent d'appréhender l'extension en profondeur du domaine sismogène de l'interplaque. Le manque de couverture des stations sismologiques permanentes est un inconvénient majeur dans l'exploration des Petites Antilles. Il s'explique en raison du peu de terres émergées et de leur éloignement de la zone potentiellement sismogène de l’interplaque. La région a donc fait l'objet de plusieurs campagnes océanographiques qui ont permis, notamment, le déploiement de sismomètres fond de mer (OBS); certains instruments étant restés immergés plusieurs mois afin de procéder à une écoute de la sismicité. Les travaux réalisés au cours de cette thèse se sont focalisés sur deux jeux de données de sismique grand-angle acquis au large des îles de la Dominique et de la Martinique. Leur analyse a permis la construction de modèles tomographiques 3D et 2D respectivement à l'échelle de l'avant-arc et de l'ensemble de la subduction. Ces modèles renseignent sur la structure sismique des plaques en convergence ainsi que sur leur géométrie. Ils permettent de discuter le rôle de la structure dans le fonctionnement de la subduction et d’obtenir une première estimation de l'extension en profondeur de la zone sismogène en considérant la portion de l'interplaque comprise entre le butoir et le Moho de la plaque supérieure. Dans un second temps, l'interprétation conjointe des modèles tomographiques et des localisations des séismes locaux a permis d'affiner cette estimation. Huit mois d'enregistrement de la sismicité montrent en effet une concentration des épicentres dans la région interne de l’avant-arc. Celle-ci présente un socle épais, à fort gradient de vitesse interprété comme plus dense et rigide que le socle de la région externe de l'avant-arc, plus déformable. La limite amont de la zone sismogène pourrait donc se situer en retrait de la position du butoir au contact de l'interplaque et de la limite entre ces deux zones de l'avant-arc. En profondeur, des mécanismes interplaques sont observés entre 35 et 45 km et interprétés comme des marqueurs de la limite aval de la zone sismogène. Cette dernière pourrait donc atteindre une profondeur jusqu'à 10 km supérieure à la limite précédemment évoquée et se trouver, par conséquent, au contact du manteau lithosphérique. L'ensemble de ces résultats suggèrent une extension en profondeur de la zone sismogène (i.e une largeur) de près de 70 km face aux îles de la Dominique et de la Martinique. Ces travaux doivent cependant être poursuivis afin d’évaluer pleinement la capacité de la zone de subduction des Petites Antilles à générer un éventuel séisme de méga-chevauchement. Le taux de couplage à l'interplaque doit être précisé ainsi que sa possible segmentation en lien, par exemple, avec à l'entrée en subduction des rides océaniques.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00172/28335/26628.pdf
http://archimer.ifremer.fr/doc/00172/28335/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This work combines structural and geochronological data to improve our understanding of the mechanical behaviour of continental crust involving large amount of magma or partially melted material in an abnormally hot collisional belt. We performed a magnetic and geochronological (U/Pb) study on a huge tonalitic batholith from the Neoproterozoic Araçuaí belt of East Brazil to determine the strain distribution through space and time. Anisotropy of magnetic susceptibility, combined with rock magnetism investigations, supports that the magnetic fabric is a good proxy of the structural fabric. Field measurements together with the magnetic fabrics highlight the presence in the batholith of four domains characterized by contrasted magmatic flow patterns. The western part is characterized by a gently dipping, orogen-parallel (∼NS) magmatic foliation that bears down-dip lineations, in agreement with westward thrusting onto the São Francisco craton. Eastward, the magmatic foliation progressively turns sub-vertical with a lineation that flips from sub-horizontal to sub-vertical over short distances. This latter domain involves an elongated corridor in which the magmatic foliation is sub-horizontal and bears an orogen-parallel lineation. Finally the fourth, narrow domain displays sub-horizontal lineations on a sub-vertical magmatic foliation oblique (∼N150°E) to the trend of the belt. U/Pb dating of zircons from the various domains revealed homogeneity in age for all samples. This, together with the lack of solid-state deformation suggests that: 1) the whole batholith emplaced during a magmatic event at ∼580 Ma, 2) the deformation occurred before complete solidification, and 3) the various fabrics are roughly contemporaneous. The complex structural pattern mapped in the studied tonalitic batholith suggests a 3D deformation of a slowly cooling, large magmatic body and its country rock. We suggest that the development of the observed 3D flow field was promoted by the low viscosity of the middle crust that turned gravitational force as an active tectonic force combining with the East-West convergence between the São Francisco and Congo cratons.
ISSN: 0191-8141

hal-00745696
https://hal.archives-ouvertes.fr/hal-00745696
DOI : 10.1016/j.jsg.2012.02.015

Éditeur(s) : Public Library Science
Résumé : Studying the larval dispersal of bottom-dwelling species is necessary to understand their population dynamics and optimize their management. The black-lip pearl oyster (Pinctada margaritifera) is cultured extensively to produce black pearls, especially in French Polynesia's atoll lagoons. This aquaculture relies on spat collection, a process that can be optimized by understanding which factors influence larval dispersal. Here, we investigate the sensitivity of P. margaritifera larval dispersal kernel to both physical and biological factors in the lagoon of Ahe atoll. Specifically, using a validated 3D larval dispersal model, the variability of lagoon-scale connectivity is investigated against wind forcing, depth and location of larval release, destination location, vertical swimming behavior and pelagic larval duration (PLD) factors. The potential connectivity was spatially weighted according to both the natural and cultivated broodstock densities to provide a realistic view of connectivity. We found that the mean pattern of potential connectivity was driven by the southwest and northeast main barotropic circulation structures, with high retention levels in both. Destination locations, spawning sites and PLD were the main drivers of potential connectivity, explaining respectively 26%, 59% and 5% of the variance. Differences between potential and realistic connectivity showed the significant contribution of the pearl oyster broodstock location to its own dynamics. Realistic connectivity showed larger larval supply in the western destination locations, which are preferentially used by farmers for spat collection. In addition, larval supply in the same sectors was enhanced during summer wind conditions. These results provide new cues to understanding the dynamics of bottom-dwelling populations in atoll lagoons, and show how to take advantage of numerical models for pearl oyster management.
Plos One (1932-6203) (Public Library Science), 2014-04 , Vol. 9 , N. 4 , P. e95050

Droits : 2014 Thomas et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
http://archimer.ifremer.fr/doc/00197/30843/29210.pdf
DOI:10.1371/journal.pone.0095050
http://archimer.ifremer.fr/doc/00197/30843/

Éditeur(s) : HAL CCSD
Résumé : This work focus on the characterization of the source and dynamic of compactional fluids during sedimentary burial, through two complementary examples of late orogenic oil‐field half‐grabens: The exhumed Lodève Permian Basin and a deep buried Jurassic basin in the North Viking Graben (North Sea).Constituting the main part of the thesis, a multi‐disciplinary approach was conducted in the Lodève Basin where Ba‐F‐Cu‐Pb polymetallic mineralized systems are trapped into synrift faults and paleokarsts in the carbonate basement at the hinge point of the rollover. The source, timing and P/T conditions of fluid migration were deduced from the analysis of the microfabric, the fluid inclusions microthermometry, and the isotopic (Sr, S, O, H) and Rare Earth Element (REE) signature. Results are then crossed with a structural and thermal modeling that consolidates the sequence and dynamics of fluid during burial.A similar approach was conducted in the North Viking Graben where fluid markers are restricted to 3D seismic and well core data. Comparable Ba‐Pb‐Zn veins are reported in basin margin, plugging one of the most important siliciclastic hydrocarbon reservoir in the substratum. This analysis provides additional constraints on basinal fluid behavior and allows us to propose a global dynamic model for various compositions of fluids and reservoirs.We conclude to a polyphase fluid sequence history including:(a) In the carbonate basement of the Lodève Basin, karstic paleocanyon incisions and associated cavities coupled to synrift fault, act as major drain for fluids. These structures are early affected by hypogen‐sulfuric karstification in response to the interaction between bacterial oxidation of sulfides entrapped within Lower Permian blackshales and the basement oxidizing aquifer.(b) Disequilibrium compaction initiates overpressure‐driven basinal fluid migration towards basin margins, characterized by temperatures around 150‐180°C and salinities between 9 et 18wt%eq.NaCl. Isotopic (Sr, S, O) and REE analyses reveal that Ba‐M+‐rich mineralizing fluids derived mainly from buried blackshales diagenesis. External fluids coming from the lower crust are also identified that play a key role in fluorite precipitation by the leaching of late hercynian granites (mean temperature of 250°C and salinity > 20wt%eq.NaCl).(c) During the synrift period, fluid overpressure is responsible for the periodic reactivation of fault plane according to seismic‐valve process, bedded‐control shearing and hydraulic brecciation at the basement‐seal interface. These mechanisms induce cyclic polymetallic mineralization by the mixing between in‐situ formation water and deep ascending basinal fluids.(d) Thermogenic fluids expulsion starts with last basinal fluids during late burial stage. Hydrocarbons thus migrate along the same regional pathways up to the rollover crest, where they are partly rerouted by the previous mineralized baffle.(e) In the Lodève basin, post‐rift exhumation of the margins led to the remobilization of synrift deposits by subaerial biochemical processes at the sulfate‐methane transition. The latter results from the interaction between the still active hydrocarbon dysmigration with a playa lake sulfate‐rich aquifer. Secondary low‐temperature barite fronts precipitate then within basement meteoric karsts.In addition to the « source to sink » model of basinal fluids, this work provides new insights on the early plugging of hydrocarbon reservoirs and for the metallogenesis of Mississippi Valley‐Type deposits.
Ce travail porte sur la caractérisation de la source et de la dynamique des fluides de bassin au cours de leur chargement à travers deux exemples complémentaires de demi‐grabens tardi‐orogéniques pétroliers : Le Bassin Permien de Lodève, aujourd’hui à l’affleurement et un bassin jurassique enfouis dans le North Viking Graben (Mer du Nord).Le coeur de la thèse concerne le Bassin de Lodève où, à partir d’une approche pluridisciplinaire intégrée, nous avons caractérisé l’architecture des minéralisations (Ba, F, Cu, Pb) piégées dans un réseau paléokarstique alimenté par les failles syn‐rift, dans le substratum carbonaté à l’apex du roll‐over. La source, le calendrier et les conditions de migration des fluides ont été approchés à partir de l’analyse de la micro‐fabrique, la microthermométrie sur inclusions fluides, les analyses isotopiques (Sr, S, O, H) et de Terres Rares. Les résultats analytiques ont été enfin croisés avec un modèle thermique et structural du bassin qui conforte la séquence et la dynamique du système fluide en cours d’enfouissement.Une démarche similaire, mais plus limitée, a été conduite dans le bassin du North Viking Graben où l’accès aux marqueurs fluides est restreint aux données de sismique 3D et de carottes. Comme à Lodève, les minéralisations Ba‐Pb‐Zn colmatent un réservoir dans le substratum à l’apex du roll‐over. Elles se présentent sous forme de ciments dans des grès ou des fractures. Cette analyse apporte des contraintes complémentaires et permet de proposer un modèle dynamique général avec des variantes en fonction de la nature des fluides et des réservoirs.On retiendra donc la séquence fluide suivante :(a) Dans le cas du bassin de Lodève sur substratum carbonaté, les chemins préférentiels de drainage se développent dans des paléocanyons N‐S couplés à un réseau de fractures et d’endokarsts météoriques. Ces derniers sont élargis en début de rifting par la dissolution hypogène sulfurique produite par l’oxydation bactérienne des sulfates et des pyrites des blackshales, au contact de l’aquifère oxydant du Cambrien.(b) Le déséquilibre de compaction initie la migration des fluides interstitiels en surpression vers les marges avec des températures autour de 150‐180°C et des salinités entre 9 et 18wt%eq.NaCl. Les analyses isotopiques (Sr, S, O) révèlent que la majorité des fluides provient de l’altération diagénétique des blackshales riches en métaux. Des interactions sont également mises en évidence avec des fluides profonds (entre 240°C et 260°C ; salinités > à 20wt%eq.NaCl), qui lessivent les granites tardi‐hercyniens.(c) Pendant le syn‐rift, les conditions de surpression de fluide permettent la réactivation cyclique des failles, les décollements stratigraphiques et la formation de brèches hydrauliques, favorisant la mise en connexion avec les réservoirs superficiels à l’apex du rollover. Le modèle de Sibson ajusté aux fluides de bassins est alors le moteur de la migration verticale.(d) Les fluides thermogéniques commencent à être expulsés avec les derniers fluides de compaction au cours d’un stade plus évolué de l’enfouissement en empruntant les mêmes chemins jusqu’à l’apex du roll over. Ils sont alors partiellement freinés et déviés par les colmatages minéralisés antérieurs.(e) A Lodève, la continentalisation des minéralisations antérieures au cours de l’exhumation post‐rift conduit à leur remaniement partiel au niveau de la transition sulfate‐méthane induite par l’interaction entre une playa évaporitique et la dysmigration des hydrocarbures. Des barytines secondaires de basse température, déprimées en Sr sont alors précipitées de manière synsédimentaire dans des karsts météoriques du socle.Outre l’illustration d’un modèle complet (source to sink) de dynamique des fluides dans un bassin, ce travail apporte de nouvelles contraintes dans l’approche du colmatage des réservoirs à hydrocarbures sur les têtes de blocs basculés et sur la genèse des gîtes miniers de type Mississippi Valley‐Type.
https://hal.archives-ouvertes.fr/tel-01457583

tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583/document
https://hal.archives-ouvertes.fr/tel-01457583/file/th%C3%A8seLaurent2015V2.pdf

Éditeur(s) : Université de Bretagne Occidentale
Résumé : The negative impact of the man on the environment unquestionably increases. The coastal environment as a whole is the maritime environment which is the most exposed to man-made eutrophication. For instance, nitrate loads to coastal waters off Brittany (France) have increased 10 times (from 3 to s 30mg L-1NO3) during the four last decades. Eutrophication of this coastal zone is now a recurrent problem, more and more worrying. This eutrophication exhibits two main forms : " green tides ", which are caused by local proliferations and stranding of green macro-algae (particularly the Ulva species) in nitrogen-enriched areas ; phytoplanktonic blooms, which are responsible for coloured water events, toxic species can be present (Pseudo-Nitzschia, Alexandrium, Dinophysis), and induce banning of shellfish consumption. The objectives of this study are to assess the respective role of various rivers (especially the Loire and the Vilaine) in the eutrophication of the Brittany shelf ecosystem and test the impact of nitrogen enrichment in the triggering of Pseudo-Nitzchia toxicity. For these purposes, a coupled hydrodynamical/ biogeochemical 3D model has been developed and validated against past measured time-series and satellite images. After a brief analysis of primary production over the Brittany shelf under different conditions, we show a description of the real time adaptation of this model. Daily results are currently presented in real time on www.previmer.org web site. The inability of the model to correctly simulate near shore phytoplankton is worsened in this model by the fact that the turbidity field used is a climatological one, made by satellite images averaged on a decadal basis. First, near shore pixels of satellite images are scarcely reliable, secondly a climatological mean cannot represent the sudden bursts or drops of the real turbidity, highly dependent on the actual sea-state : this can explain also why the model at this moment fails to reproduce a sudden bloom occurring in a short period of sunny and calm weather. The simulated Pseudo-Nitzschia biomass and induced risk of toxicity in the water column cannot really be validated offshore, because monitoring measurements are available only near the coast, and deal only with toxicity in benthic filter feeders. To get temporarily rid of that problem, an interesting improvement would be to add to the operational model the bio-accumulation of toxin in the shellfishes : simulated concentrations in shellfish fresh would become directly comparable with usual measurements of the monitoring networks. Our model points out the important impact of Loire river loads on the primary production on the western and southern Brittany. This result is crucial for administrations in charge of reducing the terrestrial loadings responsible for eutrophication, because it can delay reduction programs on small tributaries until the main input from the Loire has been significantly reduced. A question arises, about the reliability of the haline stratification in the model, because the horizontal extent of the Loire plume will be enhanced by a stronger stratification.
L'eutrophisation des milieux marins côtiers, de plus en plus importante, représente un des impacts majeurs des activités humaines sur l'environnement. Les phénomènes d'eutrophisation sont en constante augmentation ; ces dernières décennies ont vu le nombre de sites touchés augmenter de par le monde. La bande côtière bretonne est particulièrement concernée par ce phénomène. L'eutrophisation s'y manifeste de deux façons : "Des phénomènes de marée vertes, très localisées, qui sont provoqués par la croissance excessive et l'échouage de macro-algues du genre Ulva dans ces zones riches en azote ; Des blooms de phytoplancton à l'origine des phénomènes d'eaux colorées, qui peuvent aussi provoquer des interdictions de consommation de coquillages lorsque les espèces mises en jeu sont toxiques (Pseudo-Nitzschia, Alexandrium, Dinophysis). L'objectif de ce travail est multiple : il vise à mettre en évidence et à comprendre l'impact et le rôle des apports en nutriments sur la production primaire et l'eutrophisation des milieux côtiers. Ce travail a aussi pour ambition l'identification et la compréhension des causes des phénomènes d'eutrophisation et permettre ainsi d'apporter des solutions ou des pistes d'amélioration. En n, il a aussi un objectif de prévision à court terme de l'état biologique sur la zone. Pour atteindre ces objectifs, un modèle en temps réel a été mis en oeuvre. Les résultats de simulations numériques et de mesures satellitaires sont présentés sur internet : www.previmer.org. L'outil principal de ce travail est un modèle couplé physique/biogéochimie. La partie hydrodynamique est fournie par le code Mars3D (3D hydrodynamical Model for Application at Regional Scale) développé à IFREMER. Au code hydrodynamique Mars3D est couplé le modèle des cycles de l'azote, du phosphore et du silicium d'IFREMER. Le modèle couplé permet de simuler en 3 dimensions et de manière dynamique les courants, le brassage horizontal et vertical, les champs de température et de salinité, mais aussi les principaux cycles de nutriments, reproduisant ainsi les conditions déterminantes de la production primaire. La croissance des algues est modélisée, et nous permet de voir l'influence des panaches de dilution des principales rivières bretonnes sur leur croissance. Les diffcultés du modèle à correctement simuler les concentrations en phytoplancton près des zones côtières, sont probablement dues à l'utilisation d'une climatologie de concentration en matière en suspension fondée sur des données satellitaires. Tout d'abord, les pixels côtiers des images satellitaires sont entachés d'erreurs, ensuite une climatologie n'est pas capable de représenter les apports soudains des fleuves lors des crues. Cela peut expliquer l'incapacité du modèle a représenter certains blooms liés à des périodes ensoleilées et calmes. A ce modèle de base nous avons ajouté un genre spécifique de phytoplancton : le genre Pseudo-Nitzschia. Certaines espèces de Pseudo-Nitzschia sont réputées toxiques. En effet, ce phytoplancton a la capacité de synthétiser une toxine : l'acide domoïque. Cette toxine est responsable du syndrome ASP (Amnesic Shellfish Poisoning). Le modèle reproduit globalement les mêmes zones de toxicité que les mesures du REPHY, et donne des résultats encourageants. L'étude montre que la Loire influence une large partie de la bande côtière bretonne ; son panache remonte jusqu'au nord de la mer d'Iroise, et contribue pour une grande part à l'enrichissement du sud et de l'ouest de la Bretagne. Le traçage de l'azote en provenance de la Loire au sein des cycles biogéochimiques nous a permis de quantifier cet enrichissement.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00015/12603/9481.pdf
http://archimer.ifremer.fr/doc/00015/12603/

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. The area is characterized by very localized NSextension at a rate of1.5cm/year, the occurrence of frequent and intensive microseismic crises and occasionalmoderate to large earthquakes like in 1995 (Mw=6.1).Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary naturalobservatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studieshave improved our view about fault geometry and mechanics within CRL, but there is still a critical need for a betterknowledge of the structure at depth both for the accuracy of earthquake locations and for mechanical interpretationof the seismicity.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by usingrecently developed methodologies of structural imaging, in order to determine at the same time and with highresolution, the local 3D structure and the earthquake locations.We perform an iterative joint determination of 3D velocity model and earthquake coordinates. In a first step, Pand S velocity models are determined using first arrival time tomography method proposed by Taillandier et al.(2009). It consists in the minimization of the cost function between observed and theoretical arrival times which isachieved by the steepest descent method (e.g. Tarantola 1987). This latter requires computing the gradient of thecost function by using the adjoint state method (Chavent 1974). In a second step, earthquakes are located in thenew velocity model with a non-linear inversion method based on a Bayesian formulation (Gesret et al. 2015). Step1 and 2 are repeated until the cost function no longer decreases.We present preliminary results consisting in: (1) the adjustement of a 1D velocity model that is used as initialmodel of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquakelocation.In addition to the tomographic imaging, we perform a preliminary receiver function analysis of teleseismic datarecorded by the broadband stations of the CRL network. The RF analysis should provide the interface depthsbeneath seismometers and increase the imaging resolution of the upper crustal structures provided by the 3Dtomography. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar aspossible to the observed RF for a subset of data. We compare the identified interfaces with structures imaged bythe tomography.
EGU general assembly 2016
Vienne, Austria

hal-01306224
https://hal-mines-paristech.archives-ouvertes.fr/hal-01306224

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
The hydrogen content of nominally anhydrous minerals is of great interest, because it can influence many physical and mechanical properties of mantle rocks. Moreover, the hydrogen diffusion profiles can be used to constrain timescales related to magma eruptions. Here, we report models of ionic diffusion for trace elements in anisotropic crystals and apply them to hydrogen diffusing out of mantle-derived olivine. We first compare and discuss the characteristics of 1D and 3D models and show that only 3D anisotropic diffusion models can lead to diffusion profiles exhibiting non-equilibrium plateau at the center of the solid along the slowest axis, as measured in natural samples. In a second part, we discuss the differences between hydration and dehydration of olivine for diffusion that is linked to two different atomic sites involved in hydrogen mobility. Finally, we apply our 3D anisotropic model to previous results on mantle-derived olivine from Pali-aike to better characterize diffusion coefficients and their anisotropy that could be relevant for dehydration of olivine. Our results show that dehydration has to be strongly anisotropic, with a fast [100] axis and a significantly slower [001] axis.
ISSN: 0342-1791

hal-01115253
https://hal.archives-ouvertes.fr/hal-01115253
DOI : 10.1007/s00269-014-0685-x

Résumé : Ce travail est l'expression d'une volonté de chercheurs, de la Carabe d'améliorer les connaissances scientifiques méso- et micro-météorologiques appliquées aux milieux insulaires sous influence des alizés et de développer la recherche dans ces domaines.On sait que le phénomène météorologique le plus remarquable impactant les îles de la Caraïbe reste le cyclone tropical. Mais d'autres phénomènes, a des échelles inferieures, telles que les pluies intenses, les houles, la dégradation de la qualité de l'air ont une importance aigüe en termes de risques naturels ou de risques sur la sante. Ces exemples attestent la nécessité d'utiliser des méthodes de descente d'échelle pour exploiter l'information météorologique et/ou climatique de grande échelle et dériver des scenarios locaux et régionaux appliques aux territoires insulaires. Ce défi est important car l'attente d'analyses scientifiques pertinentes dans ces domaines est grande.Les travaux présentés dans ce mémoire ont pour principaux objectifs la simulation numérique puis l'analyse des mécanismes méso- et micro-échelles qui induisent des circulations locales diurnes et nocturnes sur l'archipel de la Guadeloupe à l'aide de codes numériques météorologiques éprouves car largement utilises en recherche et en prévision opérationnelle.Ils constituent donc la première étude de modélisation numérique à haute résolution en basse atmosphère, par descente d'échelle dynamique, pour des intervalles d'espace compris entre 1 km et 111 m sur cet archipel.Le modelé atmosphérique Weather Research and Forecasting ARW V3.4 (WRF ARW), non-hydrostatique, a été utilise pour l'ensemble des simulations pour modéliser la troposphère depuis l'échelle globale à l'échelle de la turbulence.Trois situations météorologiques classiques réelles d'une durée de 48 heures, correspondant à 80 % des situations météorologiques observées dans la zone, alizes soutenus (AS), alizes moyens (AM), alizes faibles (AF) ont été examinées. Ces situations sont caractérisées par les valeurs du nombre de Froude local suivantes : 0,82 (AS), 0,41 (AM) et 0,21 (AF). Six domaines de modélisation ont été sélectionnés pour effectuer les descentes d'échelle dynamiques : D01 (maille de 27 km), D02 (maille de 9 km), D03 (maille de 3 km), D04 (maille de 1 km), D05 (maille de 333 m) et D06 (maille de 111 m) avec soixante-dix niveaux verticaux. Les quatre premiers domaines (D01 à D04) couvrent l'archipel de la Guadeloupe et sont utilisés en mode méso-échelle à l'aide d'un schéma d'ensemble de couche limite planétaire YSU. Les domaines D05 (couvrant l'île de la Basse-Terre et le centre de l'archipel) et D06 (couvrant la zone littorale et rurale du Petit Cul-de-Sac Marin et la zone urbaine de l'agglomération pointoise) sont utilisés en mode Large Eddy Simulation avec une fermeture de la turbulence 1,5 TKE 3D. Le modèle WRF a été forcé toutes les six heures par l'assimilation des champs d'analyses globales du modèle NCEP FNL (1° de résolution). Les simulations effectuées ont permis d'obtenir des champs de variables météorologiques 10-minutes à très hautes résolutions spatiales.Les résultats des simulations méso- et micro-échelles ont été confrontés aux valeurs expérimentales obtenues à l'aide de capteurs places sur des mâts météorologiques (campagne Atmo-Mangrov et réseau de mesure Météo-France). Il s'agissait d'optimiser l'utilisation des couplages de codes numériques tout en conservant la possibilité de les confronter aux observations expérimentales.Les résultats des simulations numériques micro-échelles, des différents cas (AS, AM, AF) sont utilisées pour forcer (c'est-à-dire définir les conditions limites) un modèle lagrangien de dispersion de particules : FLEXPART. Le système couple FLEXPART-WRF a été employé dans le domaine D06 pour étudier la dispersion du panache d'oxydes d'azote émis par la principale usine de production d'électricité de l'île.
The present work expresses the will of Caribbean researchers to improve the meso- and micro-meteorological scientific knowledge of the trade winds influenced island areas, and to develop research in these domains.It is well known that tropical hurricanes remain the most remarkable meteorological phenomena that affect the Caribbean islands. But some other phenomena, of smaller scale, such as intense rainfall events, swells, or air quality degradation, are of extreme importance for natural or health hazards. These examples show the need to use downscaling methods to exploit large scale meteorological or climatic information, and to obtain local and regional scenarios for the island areas. This is an important challenge, as sound scientific studies in these matters are eagerly expected. The aim of the research works exposed in the present dissertation is numerical simulation and analysis of the meso- and microscale mechanisms that induce diurnal and nocturnal local circulations in the Guadeloupe archipelago, using numerical meteorological models that are widely used in research and in operational forecasting.These works represent the first high-resolution (1 km to 111 m) numerical study of the lower atmosphere over the Guadeloupe archipelago. The Weather Research and Forecasting ARW 3.4 (WRF-ARW) model is used to simulate the troposphere from global scale to turbulence scale. Real cases of three typical weather types (80% of cases during a year) are examined during 48 hours : strong trade winds (STW), medium trade winds (MTW) and weak trade winds (WTW). These weather types are characterized by values of the local Froude number : 0.82 (STW), 0.41 (MTW) and 0.21 (WTW). Six domains have been selected for the dynamical downscaling : D01 (grid spacing of 27 km), D02 (grid spacing of 9 km), D03 (grid spacing of 3 km), D04 (grid spacing of 1 km), D05 (grid spacing of 333 m) and D06 (grid spacing of 111 m), including 70 vertical levels. The first four domains (D01 to D04) cover the Guadeloupe archipelago and are used in the meso-scale simulations with the planetary boundary layer scheme YSU (ensemble mean). Domain D05 (covering the Basse-Terre island and the middle of the archipelago) and domain D06 (covering the coastal and rural area of Le Petit Cul-de-Sac Marin and the urban area of Pointe-à-Pitre), are employed in the micro-scale simulation (LES) with the 3D TKE 1.5 order closure scheme. WRF has been 6 hourly reinitialized with the NCEP FNL global analyses (resolution of 1°). These simulations permitted to obtain 10-minutes meteorological variable fields with a very high resolution (111 m).Meso-scale and micro-scale model results have been evaluated with observational data from meteorological stations (field campaign Atmo-Mangrov, French Met Office).Once validated, the micro-scale model outputs have been used for the assimilation of the lagrangian particle dispersion model : FLEXPART. The coupling FLEXPART-WRF has been employed in domain D06, in order to analyze the dispersion of the nitrogen oxide plume emitted by the main power plant of the archipelago.

http://www.theses.fr/2014AGUY0735/document

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Parentis and Arzacq-Mauleon basins located in front of the V-shaped oceanic propagator in the Bay of Biscay present evidence for extreme crustal thinning. In this paper we investigate the 3D structure of these rift basins, based on field observations and the interpretation of seismic data. We compare these results with those obtained from two different and independent inversion methods: first a 3D gravity inversion and second the standard Euler deconvolution.;For the Mauleon Basin our results show that the positive gravimetric anomaly identified above its southern margin is the consequence of two shallower high density bodies that are separated by the Pamplona fault and a deeper high density body. The high density bodies can be explained by the presence of mid-crustal and mantle rocks that were exhumed or uplifted at shallower depth during Early Cretaceous rifting before they were reworked and integrated to the Pyrenean chain during compression phase. Also, during this reactivation phase, some slices of the exhumed mid-crustal and mantle rocks were sheared off and were integrated in the present-day thrust belt in the Mauleon basin. For the Parentis Basin we can demonstrate, based on seismic data and gravimetric inversion methods, a decrease in extension from west to east, which is compatible with the V-shape geometry of the overall basin. Along strike, a change in the fault geometry from downward concave top-basement detachment faults to upward concave high-angle faults can be observed eastwards, i.e. towards the termination of the basin. A key structure, controlling the evolution of the Parentis Basin, is the east-west trending Ibis fault. We interpret this fault to have initially formed as a strike slip fault before it was reactivated during later crustal thinning. At present, it forms the limit between an upper plate sag basin to the north and a lower plate sag basin, floored at least locally by a top-basement detachment faults to the south. The strong asymmetry of the basin is supported by the shape of the basin and the results of standard Euler deconvolution.
ISSN: 0040-1951

hal-00523444
https://hal.archives-ouvertes.fr/hal-00523444
DOI : 10.1016/j.tecto.2010.04.023

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Thermal diffusivity of synthetic quartz single-crystals and natural polycrystalline aggregates were measured using a modified Angstrom method at ambient pressure and up to 800 degrees C in order to investigate the effect of crystal preferred orientation on thermal diffusivity of quartz rich rocks. The thermal diffusivity tensor of quartz was determined by measuring the thermal diffusivity of an oriented synthetic quartz single-crystal along the [100] and [001] directions. A naturally deformed, fine-grained quartzite mylonite, was used to compare the single crystal properties with aggregate properties. Using the crystal preferred orientations (CPO) measured by the Electron Back Scattered Diffraction (EBSD) method and the measured thermal diffusivity tensor of quartz, the three-dimensional aggregate thermal diffusivity was modelled using volume averaging models. In order to test the validity of these models that are only based on the properties of the constituent minerals, the thermal diffusivity was then measured on oriented cores as a function of temperature, along three orthogonal directions, parallel to the (X-lineation, Y, Z-pole to foliation) structural frame. Both modelled and direct measurement of thermal diffusivity show an anisotropy of thermal diffusivity, heat transport being more effective parallel to Y-direction and less effective parallel to the lineation X-direction. Thermal diffusivities measured in a given direction on the natural rock are lower by less than 10% than the modelled thermal diffusivity in the same direction, showing that rock imperfections have a weak effect on heat transport. In addition, the modelled thermal diffusivity anisotropy based on the characterization of crystal orientations and thermal diffusivity tensor shows a good agreement with measurements in both alpha and beta stability field. This validation of the petrophysical simulation allows for evaluating the 3D thermal diffusivity of quartz rich rocks in different crustal conditions. The 3D thermal diffusivity of five naturally deformed quartzites displaying quartz fabrics expected in different crustal pressure and temperature ranges were simulated. The resulting thermal diffusivity anisotropies of quartzites range between 40% and 10%, depending on temperature, crystallographic fabric patterns and fabric strength. Under crustal conditions, quartzites deformed in the granulite facies display a high thermal diffusivity in the (XZ) foliation plane, whereas quartzites deformed in greenschist facies have highest thermal diffusivity in the (Z) direction normal to the foliation plane.
ISSN: 0040-1951

hal-00413568
https://hal.archives-ouvertes.fr/hal-00413568
DOI : 10.1016/j.tecto.2008.11.006

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The three-dimensional S-wave velocity structure beneath the South Pacific Superswell is obtained from joint broadband seismic experiments on the ocean floor and islands. We collected only approximately 800 relative times of long-period teleseismic SH-waves by using a waveform cross-correlation from 76 events occurring from January 2003 to May 2005. We conducted relative time tomography to obtain a 3D structure to depths of 1600 km. In the resultant image, we find a characteristic distribution of low- velocity regions. The most prominent features are a large doughnut-shaped low-velocity region at 800 km depth, and an elongated large low-velocity region beneath the Society to Pitcairn hotspots at 1200 km depth. Our model suggests that a large low shear velocity province rooted in the D00 extends upwards and culminates near the top of the lower mantle beneath the central part of the South Pacific Superswell although its perfect continuity is not still confirmed.
ISSN: 0094-8276

hal-01389114
http://hal.univ-reunion.fr/hal-01389114
http://hal.univ-reunion.fr/hal-01389114/document
http://hal.univ-reunion.fr/hal-01389114/file/Tanaka_PLUME_lower_mantle_GRL2009.pdf
DOI : 10.1029/2009GL037568