Éditeur(s) : HAL CCSD
Résumé : East African Rift (EAR) is the divergent plate boundary. EAR exposes different stages of extension, from early stage rifting in Tanzania to oceanic accretion in Afar (Ethiopia). Manyara basin is the southernmost rift system of the east branch of EAR with recent volcanism (< 1.5 Ma) and a seismic swarm in the lower crust (20 – 40 km). Due to its location and tectonic setting, the Manyara basin offers the opportunity to study the earliest stage of rift initiation. Manyara volcanism is composed of several types of hyper-alkaline lavas as Mg-nephelinites (Mg# > 55) (Labait, Kwaraha), calciocarbonatite (Kwaraha) and evolved nephelinites (Mg# < 35) (Hanang).Mg-nephelinites (Labait and Kwaraha) are primary lavas mainly composed of olivine and clinopyroxene (cpx). Geochemical modelling from trace elements suggests that these primary magmas result from a degree of partial melting < 1 % from a CO2-garnet-phlogopite-bearing peridotite. These magmas have an asthenospheric source at depth > 120 km (lava carries xenoliths with equilibrium conditions > 4 GPa). The minerals were crystallized from a magma with a low H2O content (0.1 and 0.5 wt% H2O). The calciocarbonatite and evolved nephelinites are derived from Mg-nephelinites by fractional crystallization and immiscibility processes. Hanang nephelinites are silica- and alkaline-rich lavas (44.2 – 46.7 wt % SiO2, 9.5 –12.1 wt % Na2O+K2O, respectively) composed by cpx, Ti-garnet, nepheline, apatite and titanite. Complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites record magmatic differentiation involving open system with carbonate-silicate immiscibility and primary melt replenishment. The low H2O content of cpx (3 – 25 ppm wt. H2O) indicates that at least 0.3 wt % H2O was present at depth during carbonate-rich nephelinite crystallization at 340 – 640 MPa and 1050 – 1100 °C. The study of hosted-nepheline melt inclusions from Hanang allows constraining the late magmatic evolution of nephelinites during storage and magma ascent. Melt inclusions are composed by a silicate trachytic glass, a carbonate phase and a shrinkage bubble. Trachytic glass contains high content in CO2 (0.43 wt %, SIMS analyses), sulfur (0.21 – 0.92 wt % S), chlorine (0.28 –0.84 wt % Cl) and H2O low content (< 0.1 wt %, Raman analyses). Immiscibility process leading to the formation of carbonate occurs in a closed system during rapid magma ascent between 200 – 500 MPa. The carbonate phase is a Ca-Na-K-S-rich and anhydrous carbonate (33 wt % CaO, 20 wt % Na2O, 3 wt % K2O, and 3 wt % S). The pre-immiscible liquid has a phonolitic composition with 6 ± 1.5 wt % CO2 at 700 MPa. A preliminary study of melt inclusions by XANES spectroscopy and whole rocks by Mössbauer spectroscopy was used to determine these Manyara lavas were formed at oxidizing conditions (~ ΔFMQ +1.5).The early stage rifting volcanism (Manyara Basin) is characterized by CO2-rich and H2O-poor magmas from at least 120 km below the rift escarpment. The presence of CO2-rich magmas and the small amount of volcanic rocks erupted at the surface may indicate that the storage and percolation of these magmas at depth is a potential trigger for deep seismic swarms.
Le rift Est africain (REA) est une frontière de plaque en extension. Ce rift présente plusieurs stades d’extension, de l’initiation du rift en Tanzanie jusqu’à l’accrétion océanique en Afar. Le bassin de Manyara se situe le plus au sud de branche Est du REA. Il est caractérisé par la présence de volcanisme récent (< 1,5 Ma) et d’un essaim sismique dans la croûte inférieure (20 – 40 km). De par sa localisation et son contexte tectonique, le bassin de Manyara offre l’opportunité d’étudier le stade le plus précoce de l’initiation du rift. Le bassin de Manyara est composé de plusieurs types de laves hyperalcalines, les néphélinites magnésiennes (Mg# > 55) (Labait, Kwaraha), de calciocarbonatite (Kwaraha) et des néphélinites différenciées (Mg# < 35) (Hanang).Les néphélinites magnésiennes (Labait et Kwaraha) sont des laves primaires composées d’olivines et de clinopyroxènes (cpx). La modélisation géochimique des éléments en trace suggère que ces magmas primaires résultent d'un degré de fusion partielle ≤ 1 % à partir d'une péridotite à grenat et phlogopite. Ces magmas proviennent d’une profondeur > 120 km (présence de xénolites avec des conditions d’équilibre > 4 GPa). Les minéraux ont cristallisés à partir d’un magma pauvre en eau (0,1 et 0,5 pds % H2O). La calciocarbonatite et les néphélinites différenciés sont issues des néphélinites magnésiennes par cristallisation fractionnée et processus d’immiscibilité. Les néphélinites du Hanang sont riches en éléments alcalins (9,5 – 12,1 pds % Na2O+K2O) et en silice (44,2 – 46,7 pds% SiO2) et sont composés de cpx, grenat, néphéline, titanite et apatite. La zonation complexe dans les cpx (par exemple, changement brusque de Mg#, Nb/Ta, et H2O) implique une différenciation magmatique en système ouvert avec immiscibilité de liquide carbonaté et silicaté ainsi qu’un remplissage de la chambre magmatique avec des liquides primaires. La faible teneur en eau des cpx (3 – 25 ppm H2O) indique la présence d’un magma pauvre en eau (0,3 pds % H2O) lors de la cristallisation des cpx à des conditions crustales (340 – 640 MPa et 1050 – 1100 °C). L’étude des inclusions vitreuses dans les néphélines de Hanang permet de contraindre l'évolution magmatique tardive des néphélinites et le comportement des éléments volatils (CO2, H2O, S, F, Cl) lors du stockage et de la remontée du magma. Les inclusions vitreuses sont composées d’un verre trachytique, d’une phase carbonatée et d’une bulle de rétraction. Le verre trachytique contient du CO2 (0,43 pds % CO2, analyses SIMS), du soufre (0,21 à 0,92 pds% S), du chlore (0,28 – 0,84 pds % Cl) et très peu d’H2O (< 0,1 pds % H2O, analyses Raman). Le processus d’immiscibilité conduisant à la formation du carbonate se produit dans un système fermé pendant l'ascension rapide du magma, entre 200 – 500 MPa. La phase carbonatée est un carbonate anhydre et riche en Ca-Na-K-S (33 pds % CaO, 20 pds % Na2O, 3 pds % K2O, et 3 pds % S). Le liquide pré-immiscible a une composition phonolitique avec 6 ± 1,5 pds % CO2 à une pression de 700 MPa. Une étude préliminaire des inclusions par spectroscopie XANES et des roches par spectroscopie Mössbauer a permis de déterminer que les laves de Manyara se sont formées à conditions oxydantes (~ ∆FMQ +1,5).À l’initiation du rift, le volcanisme dans le bassin de Manyara est caractérisé par des magmas riches en CO2 et pauvres en H2O issus d’au moins 120 km de profondeur sous l'escarpement du rift. La présence de ces magmas riches en CO2 et la faible quantité de roches volcaniques émises à la surface peuvent indiquer que le piégeage et la percolation de ces magmas en profondeur est un déclencheur potentiel des essaims sismiques profonds.
https://tel.archives-ouvertes.fr/tel-01563231

NNT : 2016MONTT114
tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231v2/document
https://tel.archives-ouvertes.fr/tel-01563231/file/2016_BAUDOUIN_archivage.pdf

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
We present here a synthesis of the evolution of rifted continental margin systems in the Gulf of Aden. These margins are volcanic to the west of the Gulf of Aden, where they are influenced by the Afar hotspot, and non-volcanic east of longitude 46° E. The combined use of magnetics, gravity, seismic reflection, field observations (tectonic, stratigraphic and sedimentological) and oil well data allowed us to obtain better constraints on the timing of continental rifting and seafloor spreading. From the Permo-Triassic to the Oligocene, the Arabian-African plate was subject to distributed extension, probably due, at least from the Cretaceous, to tensile stresses related to the subduction of the Tethysian slab in the north. In Late Eocene-Early Oligocene, 34-33 Ma ago, rifting started to localise along the future area of continental breakup. Initially guided by the inherited basins, continental rifting then occurred synchronously over the entire gulf before becoming localised on the northern and southern borders of the inherited grabens, in the direction of the Afar hotspot. In the areas with non-volcanic margins (in the east), the faults marking the end of rifting trend parallel to the inherited grabens. Only the transfer faults cross-cut the inherited grabens, and some of these faults later developed into transform faults. The most important of these transform faults follow a Precambrian trend. Volcanic margins were formed in the west of the Gulf, up to the Guban graben in the southeast and as far as the southern boundary of the Bahlaf graben in the northeast. Seaward dipping reflectors can be observed on many oil industry seismic profiles. The influence of the hotspot during rifting was concentrated on the western part of the gulf. Therefore, it seems that the western domain was uplifted and eroded at the onset of rifting, while the eastern domain was characterised by more continuous sedimentation. The phase of distributed deformation was followed by a phase of strain localisation during the final rifting stage, just before formation of the Ocean-Continent Transition (OCT), in the most distal graben (DIM graben). About 20 Ma ago, at the time of the continental break-up, the emplacement of the OCT started in the east with exhumation of the subcontinental mantle. Farther west, the system was heated up by the strong influence of the Afar hotspot, which led to breakup with much less extension. In the Gulf of Aden (s.str), up to the Shukra El Sheik fracture zone, oceanic spreading started 17.6 Ma ago. West of this fracture zone, oceanic accretion started 10 Ma ago, and 2 Ma ago in the Gulf of Tadjoura. Post-rift deformation of the eastern margins of the Gulf of Aden can be seen in the distal and proximal domains. Indeed, the substantial post-rift uplift of these margins could be associated with either the continental break-up, or activity of the Afar hotspot and related volcanic/magmatic activity. Uplift of the northern proximal margin was still active (e.g. stepped beach rocks exposed at 60 m of 2 Ma; 30 m of 35,200 years; 10 and 2 m) and active volcanoes can be inferred at depths of between 70 and 200 km beneath the margin (at 5-10 km distance from the coast). On the distal margin, heat flow measurements show a high value that is associated with post-rift volcanic activity and the development of a volcano (with flows and sills) shortly after the formation of the OCT. The Afar hotspot is therefore important for several reasons. It allows the localisation of deformation along the Red Sea/Aden system and the rapid opening of the Gulf after the continental break-up; its influence also seems to persist during the post-rift period.
ISSN: 1866-7411

hal-01053089
https://hal.archives-ouvertes.fr/hal-01053089
DOI : 10.1007/s12517-011-0475-4

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : International audience
The seaward extension of onshore formations and structures were previously almost unknown in Provence. The interpretation of 2D high-resolution marine seismic profiles together with the integration of sea-bottom rock samples provides new insights into the stratigraphic, structural and paleogeographic framework of pre-Messinian Salinity Crisis (MSC) deposits of the Provence continental shelf. Seven post-Jurassic seismic units have been identified on seismic profiles, mapped throughout the offshore Provence area and correlated with the onshore series. The studied marine surface and sub-surface database provided new insights into the mid and late Cretaceous paleogeography and structural framework as well as into the syn-and post-rift deformation in Provence. Thick (up to 2000 m) Aptian-Albian series whose deposition is controlled by E-W-trending faults are evidenced offshore. The occurrence and location of the Upper Cretaceous South-Provence basin is confirmed by the thick (up to 1500 m) basinal series downlaping the Aptian-Albian unit. This basin was fed in terrigenous sediments by a southern massif (" Massif Méridional ") whose present-day relict is the Paleozoic basement and its sedimentary cover from the Sicié imbricate. In the bay of Marseille, thick syn-rift (Rupelian to Aquitanian) deposition occurred (>1000 m). During the rifting phase, syn-sedimentary deformations consist of dominant N040 to N060 sub-vertical faults with a normal component and N050 drag-synclines and anticlines. The syn-rift and early post-rift units (Rupelian to early Burdigalian) are deformed and form a set of E-W-trending en echelon folds that may result from sinistral strike-slip reactivation of N040 to N060 normal faults during a N-S com-pressive phase of early-to-mid Burdigalian age (18-20 Ma). Finally, minor fault reactivation and local folding affect post-rift deposits within a N160-trending corridor localized south of La Couronne, and could result from a later, post-Burdigalian and pre-Pliocene compressive phase.
Cadre tectonostratigraphique des formations anté-pliocènes du plateau continental de Provence (golfe du Lion oriental, SE France) Mots-clés. – Géologie marine, Tectonostratigraphie, Stratigraphie sismique, Paléogéographie crétacée, Rifting oligo-miocène, Compression post-rift Résumé. – Le prolongement en mer des formations et des structures provençales était jusqu'alors largement inconnu.L'interprétation de profils de sismique-réflexion marine 2D et l'intégration de dragages et carottages du fond-marin ont permis d'apporter des éléments nouveaux concernant le cadre stratigraphique, structural et paléogéographique des dé-pôts anté-Messiniens du plateau continental de Provence. Sept unités sismiques post-jurassiques ont été identifiées sur les profils sismiques, cartographiées à travers le plateau continental et corrélées avec les séries affleurant à terre. Une épaisse unité apto-albienne (jusqu'à 2000 m) dont le dépôt est contrôlé par des failles E-W a été mise en évidence en mer. L'existence d'un bassin subsident au Crétacé supérieur sur le plateau continental de Provence a été confirmée par le développement d'une épaisse série de bassin (jusqu'à 1500 m) reposant en downlap sur l'Apto-Albien. Le socle mé-tamorphique de l'écaille de Sicié et sa couverture sédimentaire peut être considéré comme une relique allochtone du « Massif Méridional » ayant alimenté le Bassin sud-provençal en éléments terrigènes au Crétacé supérieur. Dans la rade de Marseille, une épaisse unité syn-rift (Rupélien à Aquitanien) a été mise en évidence (>1000 m), structurée en une série de synformes en échelon d'axe E-W et affectée par des failles d'orientation dominante N040 à N060. Sur le flanc sud des synformes, la formation de plis d'axe N050 est associée à une déformation syn-sédimentaire. La formation des synformes en échelon d'axe E-W résulterait d'une réactivation en décrochement des failles N040 à N060 pendant une phase de compression N-S dont l'âge est compris entre le Burdigalien inférieur et moyen (18-20 Ma). Enfin, les dépôts post-rift sont affectés par des déformations mineures (réactivation de failles et plis associés), le long d'un couloir d'orientation N160 à l'ouest de la baie de Marseille, attribuables à une phase de compression post-burdigalienne et anté-pliocène.
ISSN: 0037-9409

hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727/document
https://hal-amu.archives-ouvertes.fr/hal-01463727/file/Fournier_et_al_Provence_2016.pdf
DOI : 10.2113/gssgfbull.187.4-5.187

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tyrrhenian Sea is usually interpreted to be a Neogene back-arc basin that opened by continental rifting and oceanic spreading caused by the eastward migration of the Apennine subduction system during Miocene and Pliocene times. Rifting of the southern Tyrrhenian Sea started first along the Eastern Sardinian margin during the middle to late Miocene times, including the Messinian. The "METYSS" project aims at better constraining the relationships between crustal tectonics, salt tectonics and sedimentation from Messinian times to present-day. The "METYSS 1" cruise (2009) allowed to acquire about 1200 km of HR seismic-reflection profiles along the Eastern Sardinian margin, Western Tyrrhenian Sea. This data set clearly illustrates that this area has been highly dissected during the rifting stage by N-S trending normal faults delineating ridges and basins, as previously described. The Messinian seismic markers (UU and MU) locally display fan-shaped stratal geometries, but the mechanism responsible for such geometries, salt tectonics or rifting, has yet to be carefully deciphered. We also mapped the spatial distribution of the mobile salt. The highly variable thickness of the small confined salt basins may be related to the initial pre-Messinian basin geometry, to the fact that salt deposition was syn-rift or to salt movement. Southeastward, salt tectonics is vigorous in unconfined basins and appears to have started early during the UU deposition. More surprisingly, our data demonstrate that some of the major faults have been significantly reactivated during the post-rift period, up to late Quaternary time, as shown by bathymetric scarps and associated debris flows. Moreover, some of this post-rift deformation can be evidenced within the Plio-Quaternary sequence by a regional unconformity. The post-Miocene deformation style varies greatly between different areas of the margin, and can also be strongly influenced by the presence or absence of mobile Messinian salt.
ISSN: 0040-1951

hal-00996665
https://hal.archives-ouvertes.fr/hal-00996665
DOI : 10.1016/j.tecto.2013.12.015

Éditeur(s) : Elsevier
Résumé : High P-wave velocities (7.1-7.8 km/s) lower crustal bodies (LCBs) imaged along volcanic margins are commonly interpreted as plume and break-up-related thick mafic underplating. This interpretation is partly challenged in this paper based on new seismic observations and modelling of the outer Voring Basin (Norway). An exceptional strong amplitude reflection, the T Reflection, is particularly well defined below the North Gjallar Ridge (NGR) between 7 and 8 s TWT. The T Reflection is located near the volcanic lava flows emplaced during the NE Atlantic breakup (similar to 55-54 Ma ago) and coincides with the top of the LCB, forming a mid-crustal dome. Based on structural and temporal relationships, we show that the dome clearly influences the structural development of the NGR and predates the continental breakup at least by 10-15 Ma. Using a thermo-kinematical model, we tried also to investigate and quantify the relationships between the extension, LCB and the magmatic production. Modelling suggests that significant Paleocene-Early Eocene magmatism can be produced without any temperature anomaly in the mantle if differential stretching occurs during the break-up initiation. The conclusion of 2D thermo-kinematical parametric analysis is that the magmatic model predicts, either little extension (beta < 2) with no melting or high extension (beta > 5) with significant melting along the outer Voring Basin. We suggest that the continental part of the LCB could not necessarily be breakup-related and so magmatic, as has often been stated previously. It is concluded here that the continental part of the LCB observed beneath the outer Voring Basin may be partly (or fully) attributed to inherited, high-pressure granulite/eclogite lower crustal rocks. The real amount of mafic material emplaced along the outer Voring Basin could be 20-40% less than thought.
Tectonophysics (0040-1951) (Elsevier), 2006 , Vol. 412 , N. 3-4 , P. 255-278

Droits : 2005 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-1042.pdf
DOI:10.1016/j.tecto.2005.10.038
http://archimer.ifremer.fr/doc/00000/1042/

Éditeur(s) : HAL CCSD
Résumé : This work focus on the characterization of the source and dynamic of compactional fluids during sedimentary burial, through two complementary examples of late orogenic oil‐field half‐grabens: The exhumed Lodève Permian Basin and a deep buried Jurassic basin in the North Viking Graben (North Sea).Constituting the main part of the thesis, a multi‐disciplinary approach was conducted in the Lodève Basin where Ba‐F‐Cu‐Pb polymetallic mineralized systems are trapped into synrift faults and paleokarsts in the carbonate basement at the hinge point of the rollover. The source, timing and P/T conditions of fluid migration were deduced from the analysis of the microfabric, the fluid inclusions microthermometry, and the isotopic (Sr, S, O, H) and Rare Earth Element (REE) signature. Results are then crossed with a structural and thermal modeling that consolidates the sequence and dynamics of fluid during burial.A similar approach was conducted in the North Viking Graben where fluid markers are restricted to 3D seismic and well core data. Comparable Ba‐Pb‐Zn veins are reported in basin margin, plugging one of the most important siliciclastic hydrocarbon reservoir in the substratum. This analysis provides additional constraints on basinal fluid behavior and allows us to propose a global dynamic model for various compositions of fluids and reservoirs.We conclude to a polyphase fluid sequence history including:(a) In the carbonate basement of the Lodève Basin, karstic paleocanyon incisions and associated cavities coupled to synrift fault, act as major drain for fluids. These structures are early affected by hypogen‐sulfuric karstification in response to the interaction between bacterial oxidation of sulfides entrapped within Lower Permian blackshales and the basement oxidizing aquifer.(b) Disequilibrium compaction initiates overpressure‐driven basinal fluid migration towards basin margins, characterized by temperatures around 150‐180°C and salinities between 9 et 18wt%eq.NaCl. Isotopic (Sr, S, O) and REE analyses reveal that Ba‐M+‐rich mineralizing fluids derived mainly from buried blackshales diagenesis. External fluids coming from the lower crust are also identified that play a key role in fluorite precipitation by the leaching of late hercynian granites (mean temperature of 250°C and salinity > 20wt%eq.NaCl).(c) During the synrift period, fluid overpressure is responsible for the periodic reactivation of fault plane according to seismic‐valve process, bedded‐control shearing and hydraulic brecciation at the basement‐seal interface. These mechanisms induce cyclic polymetallic mineralization by the mixing between in‐situ formation water and deep ascending basinal fluids.(d) Thermogenic fluids expulsion starts with last basinal fluids during late burial stage. Hydrocarbons thus migrate along the same regional pathways up to the rollover crest, where they are partly rerouted by the previous mineralized baffle.(e) In the Lodève basin, post‐rift exhumation of the margins led to the remobilization of synrift deposits by subaerial biochemical processes at the sulfate‐methane transition. The latter results from the interaction between the still active hydrocarbon dysmigration with a playa lake sulfate‐rich aquifer. Secondary low‐temperature barite fronts precipitate then within basement meteoric karsts.In addition to the « source to sink » model of basinal fluids, this work provides new insights on the early plugging of hydrocarbon reservoirs and for the metallogenesis of Mississippi Valley‐Type deposits.
Ce travail porte sur la caractérisation de la source et de la dynamique des fluides de bassin au cours de leur chargement à travers deux exemples complémentaires de demi‐grabens tardi‐orogéniques pétroliers : Le Bassin Permien de Lodève, aujourd’hui à l’affleurement et un bassin jurassique enfouis dans le North Viking Graben (Mer du Nord).Le coeur de la thèse concerne le Bassin de Lodève où, à partir d’une approche pluridisciplinaire intégrée, nous avons caractérisé l’architecture des minéralisations (Ba, F, Cu, Pb) piégées dans un réseau paléokarstique alimenté par les failles syn‐rift, dans le substratum carbonaté à l’apex du roll‐over. La source, le calendrier et les conditions de migration des fluides ont été approchés à partir de l’analyse de la micro‐fabrique, la microthermométrie sur inclusions fluides, les analyses isotopiques (Sr, S, O, H) et de Terres Rares. Les résultats analytiques ont été enfin croisés avec un modèle thermique et structural du bassin qui conforte la séquence et la dynamique du système fluide en cours d’enfouissement.Une démarche similaire, mais plus limitée, a été conduite dans le bassin du North Viking Graben où l’accès aux marqueurs fluides est restreint aux données de sismique 3D et de carottes. Comme à Lodève, les minéralisations Ba‐Pb‐Zn colmatent un réservoir dans le substratum à l’apex du roll‐over. Elles se présentent sous forme de ciments dans des grès ou des fractures. Cette analyse apporte des contraintes complémentaires et permet de proposer un modèle dynamique général avec des variantes en fonction de la nature des fluides et des réservoirs.On retiendra donc la séquence fluide suivante :(a) Dans le cas du bassin de Lodève sur substratum carbonaté, les chemins préférentiels de drainage se développent dans des paléocanyons N‐S couplés à un réseau de fractures et d’endokarsts météoriques. Ces derniers sont élargis en début de rifting par la dissolution hypogène sulfurique produite par l’oxydation bactérienne des sulfates et des pyrites des blackshales, au contact de l’aquifère oxydant du Cambrien.(b) Le déséquilibre de compaction initie la migration des fluides interstitiels en surpression vers les marges avec des températures autour de 150‐180°C et des salinités entre 9 et 18wt%eq.NaCl. Les analyses isotopiques (Sr, S, O) révèlent que la majorité des fluides provient de l’altération diagénétique des blackshales riches en métaux. Des interactions sont également mises en évidence avec des fluides profonds (entre 240°C et 260°C ; salinités > à 20wt%eq.NaCl), qui lessivent les granites tardi‐hercyniens.(c) Pendant le syn‐rift, les conditions de surpression de fluide permettent la réactivation cyclique des failles, les décollements stratigraphiques et la formation de brèches hydrauliques, favorisant la mise en connexion avec les réservoirs superficiels à l’apex du rollover. Le modèle de Sibson ajusté aux fluides de bassins est alors le moteur de la migration verticale.(d) Les fluides thermogéniques commencent à être expulsés avec les derniers fluides de compaction au cours d’un stade plus évolué de l’enfouissement en empruntant les mêmes chemins jusqu’à l’apex du roll over. Ils sont alors partiellement freinés et déviés par les colmatages minéralisés antérieurs.(e) A Lodève, la continentalisation des minéralisations antérieures au cours de l’exhumation post‐rift conduit à leur remaniement partiel au niveau de la transition sulfate‐méthane induite par l’interaction entre une playa évaporitique et la dysmigration des hydrocarbures. Des barytines secondaires de basse température, déprimées en Sr sont alors précipitées de manière synsédimentaire dans des karsts météoriques du socle.Outre l’illustration d’un modèle complet (source to sink) de dynamique des fluides dans un bassin, ce travail apporte de nouvelles contraintes dans l’approche du colmatage des réservoirs à hydrocarbures sur les têtes de blocs basculés et sur la genèse des gîtes miniers de type Mississippi Valley‐Type.
https://hal.archives-ouvertes.fr/tel-01457583

tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583/document
https://hal.archives-ouvertes.fr/tel-01457583/file/th%C3%A8seLaurent2015V2.pdf

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : In the western Mediterranean Sea, the Liguro-Provençal Basin (LPB) is a key area for studying passive margins because of its recent formation and abundance of onshore and offshore data. The Nerthe area located in the northern margin of LPB provides the unique continuous Oligo-Miocene deposits contemporaneous of the transition rifting to drifting. However, the age of the deposits remains debated and the link between outcrops and offshore seismic data is poorly constrained. The purpose of this paper is double. First, we intend to propose a new chronostratigraphic frame based on bio- (planktonic foraminifera, calcareous nannofossils) and magneto-stratigraphy. Second, we aim to make, through the integration of new highly time-resolved seismic data and field works, a coherent onshore-offshore link concretized by a 3D geological model. The new temporal and spatial data presented in this paper allow correlating the Oligo-Miocene sequences, defining their geometry and specifying precisely the timing of syn- and post-rift stages. The first marine transgression is now precisely dated latest Chattian within the syn-rift deposits and appears to be synchronous with the first marine deposits in the offshore wells and other marginal basins. The transition from syn-rift to post-rift appears to last 3.3 Ma at maximum, between 21.8 and 18.5 Ma (late Aquitanian to early Burdigalian). It is underlined by two major erosional unconformities bearing a hiatus of around 1 Ma. The post-rift started with a major marine transgression that is now dated from middle Burdigalian, at around 18.5 Ma, as elsewhere in the LPB. Contrarily to recent proposals, the post-rift deposits are widely represented on the northeastern margin of the "Golfe du Lion". There, the subsidence of the margin was low during the syn-rift and the transitional periods and high during the post-rift. The onset of this high post-rift subsidence appears to be synchronous with the slowdown of the Corsica-Sardinia block (CSb) motion.
EISSN: 1777-5817

hal-00558497
https://hal.archives-ouvertes.fr/hal-00558497
DOI : 10.2113/gssgfbull.181.6.591

Éditeur(s) : Elsevier Science Bv
Résumé : In the South Gabon Basin, deep multi-channel seismic reflection and gravity modeling analysis have shed light on key features of the structure of the margin. The thinned continental crust beneath the Gabon Margin appears to be composed of two distinct layers, separated by a clear, strong and more or less continuous reflector running in the 7–10 s TWT window. The lower crust is characterized by a higher density, intermediate between the lower values of the upper crust and the denser values of the mantle. The lower crust is irregularly shaped and presents lateral thickness variations along the direction of thinning and along the coast. In the offshore thinned continental domain, the lower and upper crust form a 20–25 km thick body. Crustal thicknesses point to a relatively sharp and narrow transition, along a few tens of kilometers, between the unthinned and the thinned continental crust. The high density layer identified offshore Gabon presents similar characteristics in density, geometry and spatial distribution, as the underplated magmatic bodies observed along volcanic margins, e.g. along the South Atlantic Namibia Margin or the North Atlantic Vøring Margin. Although this lower crustal body could possibly represent ultra mafic serpentinized rocks or high grade metamorphic crustal rocks, we suggest that it could be composed of mafic rocks. Magmas resulting from partial melting during rifting may underplate the crust and/or be intruded in the lower crust through a system of dykes and sills. In this view, the present-day crustal thicknesses along rifted margins, characterized by magmatic underplating and/or intrusion, are not representative of the thinning that the crust experienced during rifting. Results of this study point to relatively shallow sedimentary basins along the South Gabon Margin. The deepest offshore depocenters located under the westernmost side of the continental platform appear to be associated with the deepest syn-rift basins These basins seem to extend along 20 to 40 km in the ~ NE–SW direction with a present-day average thickness of 7.3 km. Offshore Gabon, whereas the crustal thinning appears significant, the syn-rift deposit are not thick. We suggest that the area was anomalously uplifted during the rifting phase, due to an elevated thermal lithospheric gradient. The conclusions derived from our seismic and gravity analysis are consistent with the implications such a thermal anomaly would have on the tectonic evolution of a rifted margin with 1) an underplated high density lower crustal layer, 2) shallow depth syn-rift basins associated with a relatively thin crust and subsequently 3) elevated recorded subsidence rates in the initial post-rift stages. Research Highlights ► The Gabon Margin appears characterized by an underplated high density lower crustal layer. ► Shallow depth syn-rift basins are associated with a relatively thin crust. ► Seismic and gravity analysis points to an anomalous uplift of the Gabon Margin during the rifting phase. ► Crustal structure, syn-rift infill and post-rift subsidence are consistent an uplift of the Gabon Margin during the rifting phase. ► The uplift of the Gabon Margin is possibly due to an elevated thermal lithospheric gradient.
Tectonophysics (0040-1951) (Elsevier Science Bv), 2011-06 , Vol. 506 , N. 1-4 , P. 31-45

Droits : 2011 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00039/15020/12347.pdf
DOI:10.1016/j.tecto.2011.04.009
http://archimer.ifremer.fr/doc/00039/15020/

Éditeur(s) : Amer Geophysical Union
Résumé : The Algerian margin has originated from the opening of the Algerian basin about 25-30 Ma ago. The central margin provides evidence for large-scale normal faults of Oligo-Miocene age, whereas transcurrent tectonics characterizes the western margin. A set of NW-SE oriented dextral transform faults was active during basin opening and divided the 600 km long central margin into segments of similar to 120-150 km. The upper Miocene, Plio-Quaternary, and present-day tectonic setting is, however, compressional and supports the occurrence of a margin inversion, a process still poorly documented worldwide. We show that the central Algerian margin represents a rare example of inverted margin, where the process of subduction inception is particularly well expressed and helps understand how extensional and transtensive structures are involved in margin shortening. Using multibeam bathymetry and multichannel seismic reflection sections from the MAR-ADJA 2003 and 2005 cruises, we evidence Pliocene-Pleistocene shortening with contrasting styles along the margin between west (Khayr Al Din bank) and east (Boumerdes-Dellys margin) of Algiers. Pre-Miocene structures such as basement highs and transform faults appear to control changes of the deformation pattern along this part of the margin, resulting in different widths, geometries, and relative positions of folds and faults. Plio-Quaternary and active blind thrust faults do not reuse Oligo-Miocene normal and transform faults during inversion, but instead grow within the continental margin (as testified for instance by the 21 May 2003 M-w 6.8 Boumerdes-Zemmouri earthquake), at the foot of the continental slope and at the northern sides of basement highs interpreted as stretched continental blocks of the rifted margin. The inherited structures of the margin appear, therefore, to determine this deformation pattern and ultimately the earthquake and tsunami sizes offshore. The complex geometry of the fault system along the Algerian margin suggests a process of initiation of subduction in its central and eastern parts.
Tectonics (0278-7407) (Amer Geophysical Union), 2010-03 , Vol. 29 , N. TC2008 , P. 1-22

Droits : 2010 American Geophysical Union
http://archimer.ifremer.fr/doc/00008/11883/9286.pdf
http://archimer.ifremer.fr/doc/00008/11883/9287.pdf
DOI:10.1029/2009TC002547
http://archimer.ifremer.fr/doc/00008/11883/

Éditeur(s) : Wiley / Blackwell
Résumé : P>New seismic reflection data from the Grand Banks of Newfoundland and the Newfoundland Basin add to the growing knowledge of the composition, structure and history of this non-volcanic margin. Geophysical imaging is now approaching the extent of that done previously on the conjugate margin along Iberia, providing a valuable database for the development of rifting models. Two parallel profiles over the shelf platform image deep crustal fabric representing Precambrian or possibly Appalachian deformation as well as Mesozoic extension. Progressively more intense extension of continental crust is imaged oceanwards without the highly reflective detachments frequently seen on profiles off Galicia. A landward-dipping event 'L' is imaged sporadically and appears to be analogous to a similar event on the Iberian IAM9 profile. The transition zone is probably exposed serpentinized mantle as interpreted off the Iberian margin although there appears to be a difference in the character of ridge development and reflectivity. The distinctive 'U' reflection identified previously at the base of the Newfoundland Basin deep water sedimentary section and recently identified as one or more thin basalt sills is imaged on newly presented profiles that connect previously published profiles SCR3 and SCR2 showing that 'U' is highly regular and continuous except where interrupted by basement highs. 'U' is also seen to have a major impact on the ability to image underlying basement. A full transect beginning over completely unextended continental crust through to oceanic crust has provided a data set from which estimates of extension and the pre-rifting location of the present continental edge can be made. Two estimates were obtained; 85 km based on faulting and 120 km based on crustal thickness.
Geophysical Journal International (0956-540X) (Wiley / Blackwell), 2009-08 , Vol. 178 , N. 2 , P. 1004-1020

Droits : 2009 Wiley / Blackwell
http://archimer.ifremer.fr/doc/2009/publication-6919.pdf
DOI:10.1111/j.1365-246X.2009.04162.x
http://archimer.ifremer.fr/doc/00000/6919/

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Present Address : ISTO - UMR7327
International audience
The pre-rift Mesozoic sequences of the Cretaceous passive margins fossilized in the North Pyrenean Zone (NPZ) are characterized by high temperature deformation in relation with thinning of the continental basement. Our compilation of chronological and geological data confirms a clear correlation between the distribution of the highest paleotemperatures in the pre-rift sedimentary cover and the loci of extreme crustal stretching. Geological evidences such as the occurrence of peridotite bodies directly underlying metamorphic pre-rift sediments indicate an early attenuation of the rifted continental crust. This leads us to propose a mechanism of rifting involving boudinage of the continental crust. The lateral extraction of the Paleozoic basement occurred under the pre-rift cover that is decoupled on the Triassic clays and evaporates. The thermal conditions allowing coeval ductile deformation of the crust and of the pre-rift sediments leaded to the widening of basins devoid of large faulted blocks. We discuss the implications on the origin and significance of the granulites and the relations between flysch deposition and high temperature metamorphism of the pre-rift sediments. In the NPZ, Albian-Cenomanian flysch sequences were deposited synchronously with the syn-metamorphic ductile deformation of the pre-rift sequences. Since the base of the flysch deposits also recorded locally the high-temperature tectonic event, we propose an original mechanism for the evolution of the basins involving continuous deformation of the pre-rift metamorphic sediments. At the scale of the Pyrenean domain, our results suggest a strong lateral variability in the tectonic style of passive margins, in direct link with their thermic pattern
ISSN: 0278-7407

insu-01017432
https://hal-insu.archives-ouvertes.fr/insu-01017432
https://hal-insu.archives-ouvertes.fr/insu-01017432/document
https://hal-insu.archives-ouvertes.fr/insu-01017432/file/tect20164.pdf
DOI : 10.1002/2013TC003471

Éditeur(s) : HAL CCSD
Résumé : This thesis compiles two distinct studies that both document the control of microstructures on rock seismic properties. The first part deals with the development of crystallographic preferred orientations (CPO) in the uppermost mantle associated with melt/fluid-rock interactions, recorded in peridotites xenoliths from the Japan sea back-arc basin. The microstructural and geochemical characteristics of the studied samples reveal that active spreading is associated to uppermost mantle deformation similar to that observed in the Oman ophiolite. At the onset of back-arc spreading, there are no strong interactions between melt percolation and deformation in comparison to continental rift zones, probably due to the relatively small size and short duration of the spreading event. The second part presents a unique database of plagioclase CPO from variously deformed mafic rocks. CPO are grouped in three main types; their characteristics as a function of deformation regime (magmatic or crystal-plastic) are outlined and discussed. Calculated seismic properties of gabbroic rocks show that anisotropy tends to increase as a function of fabric strength, although it is generally weak, due to the competing effect of olivine/clinopyroxene and plagioclase.
Cette thèse regroupe deux études distinctes, qui documentent le contrôle des microstructures sur les propriétés sismiques des roches. La première partie traite du développement des orientations préférentielles cristallographiques (OPC) dans le manteau supérieur, associé aux interactions liquide/magma-roche, enregistré dans des xénolites de péridotites du bassin d'arrière-arc de la mer du Japon. Les caractéristiques microstucturales et géochimiques des échantillons étudiés montrent que l'ouverture arrière-arc active est associée à une déformation du manteau supérieure similaire à celle observée dans l'ophiolite d'Oman. L'initiation de l'extension d'arrière-arc n'est pas associée à de fortes interactions entre percolation magmatique et déformation, en comparaison avec les zones de rifting continentales, probablement en raison des taille et durée relativement petites de l'épisode d'ouverture. La seconde partie présente une base de données unique d'OPC de plagioclase de roches mafiques plus ou moins déformées. Les OPC sont classées en 3 types principaux; leurs caractéristiques en fonction du régime de déformation (magmatique ou plastique) sont présentées et discutées. Les propriétés sismiques calculées des roches gabbroiques montrent que l'anisotropie tend à croitre avec l'intensité des fabriques, bien qu'elle soit généralement faible, en raison des effets opposés des olivines/clinopyroxènes et du plagioclase.
https://tel.archives-ouvertes.fr/tel-00795505

tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505
https://tel.archives-ouvertes.fr/tel-00795505/document
https://tel.archives-ouvertes.fr/tel-00795505/file/Satsukawa_thesis_UM2.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Parentis and Arzacq-Mauleon basins located in front of the V-shaped oceanic propagator in the Bay of Biscay present evidence for extreme crustal thinning. In this paper we investigate the 3D structure of these rift basins, based on field observations and the interpretation of seismic data. We compare these results with those obtained from two different and independent inversion methods: first a 3D gravity inversion and second the standard Euler deconvolution.;For the Mauleon Basin our results show that the positive gravimetric anomaly identified above its southern margin is the consequence of two shallower high density bodies that are separated by the Pamplona fault and a deeper high density body. The high density bodies can be explained by the presence of mid-crustal and mantle rocks that were exhumed or uplifted at shallower depth during Early Cretaceous rifting before they were reworked and integrated to the Pyrenean chain during compression phase. Also, during this reactivation phase, some slices of the exhumed mid-crustal and mantle rocks were sheared off and were integrated in the present-day thrust belt in the Mauleon basin. For the Parentis Basin we can demonstrate, based on seismic data and gravimetric inversion methods, a decrease in extension from west to east, which is compatible with the V-shape geometry of the overall basin. Along strike, a change in the fault geometry from downward concave top-basement detachment faults to upward concave high-angle faults can be observed eastwards, i.e. towards the termination of the basin. A key structure, controlling the evolution of the Parentis Basin, is the east-west trending Ibis fault. We interpret this fault to have initially formed as a strike slip fault before it was reactivated during later crustal thinning. At present, it forms the limit between an upper plate sag basin to the north and a lower plate sag basin, floored at least locally by a top-basement detachment faults to the south. The strong asymmetry of the basin is supported by the shape of the basin and the results of standard Euler deconvolution.
ISSN: 0040-1951

hal-00523444
https://hal.archives-ouvertes.fr/hal-00523444
DOI : 10.1016/j.tecto.2010.04.023

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : Permo-Triassic rift basins offer important hydrocarbon targets along the Atlantic margins. Their fill is dominated by continental red beds, comprising braided fluvial, alluvial fan, aeolian, floodplain and lacustrine facies. These relatively lightly explored basins span both the Atlantic and Tethyan domains and developed above a complex basement with inherited structural fabrics. Sparse data in offshore regions constrain understanding of depositional geometries and sedimentary architecture, further impeded by their deep burial beneath younger strata, combined with the effects of later deformation during continental breakup. This paper provides results from a multidisciplinary analysis of basins along the Atlantic margin. Regional seismic and well data, combined with geochemical provenance analysis from the European North Atlantic margins, are integrated with detailed outcrop studies in Morocco and Nova Scotia. The research provides new insights into regional basin tectonostratigraphic evolution, sediment fill, and reservoir distribution, architecture and quality at a range of scales. Regional seismic profiles, supported by key well data, indicate the presence of post-orogenic collapse basins, focused narrow rifts and low-magnitude multiple extensional depocentres. Significantly, Permo-Triassic basin geometries are different and more varied than the overlying Jurassic and younger basins. Provenance analysis using Pb isotopic composition of detrital K-feldspar yields new and robust controls on the sediment dispersal patterns of Triassic sandstones in the NE Atlantic margin. The evolving sedimentary architecture is characterized by detailed sedimentological studies of key outcrops of age equivalent Permian-Triassic rifts in Morocco and Nova Scotia. The interplay of tectonics and climate is observed to influence sedimentation, which has significant implications for reservoir distribution in analogue basins. New digital outcrop techniques are providing improved reservoir models, and identification of key marker horizons and sequence boundaries offers a potential subsurface correlation tool. Future work will address source and seal distribution within the potentially petroliferous basins.
Petroleum Geology: From Mature Basins to New Frontiers Proceedings of the 7th Petroleum Geology Conf

hal-00590618
https://hal.archives-ouvertes.fr/hal-00590618

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Although magmatism may occur during the earliest stages of continental rifting, its role in strain accommodation remains weakly constrained by largely 2-D studies. We analyze seismicity data from a 13 month, 39-station broadband seismic array to determine the role of magma intrusion on state-of-stress and strain localization, and their along-strike variations. Precise earthquake locations using cluster analyses and a new 3-D velocity model reveal lower crustal earthquakes beneath the central basins and along projections of steep border faults that degas CO2. Seismicity forms several disks interpreted as sills at 6-10 km below a monogenetic cone field. The sills overlie a lower crustal magma chamber that may feed eruptions at Oldoinyo Lengai volcano. After determining a new ML scaling relation, we determine a b-value of 0.87±0.03. Focal mechanisms for 65 earthquakes, and 13 from a catalogue prior to our array reveal an along-axis stress rotation of ∼60° in the magmatically active zone. New and prior mechanisms show predominantly normal slip along steep nodal planes, with extension directions ∼N90°E north and south of an active volcanic chain consistent with geodetic data, and ∼N150°E in the volcanic chain. The stress rotation facilitates strain transfer from border fault systems, the locus of early-stage deformation, to the zone of magma intrusion in the central rift. Our seismic, structural, and geochemistry results indicate that frequent lower crustal earthquakes are promoted by elevated pore pressures from volatile degassing along border faults, and hydraulic fracture around the margins of magma bodies. Results indicate that earthquakes are largely driven by stress state around inflating magma bodies.
ISSN: 1525-2027

hal-01667198
https://hal.archives-ouvertes.fr/hal-01667198
DOI : 10.1002/2017GC007027

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Apatite fission track analysis (AFTA) data are used to bring new light on the long-term and recent history of the Baikal rift region (Siberia). We describe the evolution of the topography along a NW-SE profile from the Siberian platform to the Barguzin range across the Baikal-southern Patom range and the northern termination of Lake Baikal. Our results show that the Baikal-Patom range started to form in the Early Carboniferous and was reactivated in Middle Jurassic-Lower Cretaceous times during the orogenic collapse of the Mongol-Okhotsk belt. Samples located in the Siberian platform recorded a continuous sedimentation up to the early Carboniferous but remain unaffected by later tectonic episodes. The Barguzin basin probably started to form as early as Late Cretaceous, suggesting a continuum of deformation between the postorogenic collapse and the opening of the Baikal Rift System (BRS). The initial driving mechanism for the opening of the BRS is thus independent from the India-Asia collision. AFTA show a late Miocene-early Pliocene increase in tectonic extension in the BRS that confirms previous thoughts and might reflect the first significant effect of the stress field generated by the India-Asia collision.
ISSN: 0278-7407

hal-00420895
https://hal.archives-ouvertes.fr/hal-00420895
DOI : 10.1029/2008TC002404

Éditeur(s) : Amer Geophysical Union
Résumé : The origin of the Algerian margin remains one of the key questions still discussed in the Western Mediterranean sea, due to the imprecise nature and kinematics of the associated basin during the Neogene. For the first time, the deep structure of the Maghrebian margin was explored during the SPIRAL seismic survey. In this work, we present a N-S transect off Tipaza (west of Algiers), a place where the margin broadens due to a topographic high (Khayr-al-Din Bank). New deep penetration seismic profiles allow us to image the sedimentary sequence in the Algerian basin and the crustal structure at the continent-ocean boundary. Modeling of the wide-angle data shows thinning of the basement, from more than 15km in the continental upper margin to only 5–6km of oceanic-type basement in the Algerian basin, and reveals a very narrow or absent transitional zone. Analysis of the deep structure of the margin indicates features inherited from its complex evolution: (1) an oceanic-type crust in the deep basin, (2) similarities with margins formed in a transform-type setting, (3) a progressive deepening of the whole sedimentary cover, and the thickening of the Plio-Quaternary sediments at the margin foot, coeval with (4) a downward flexure of the basement in the basin. These features argue for a multiphased evolution of the margin, including (1) an early stage of rifting and/or spreading, (2) a late transcurrent episode related to the westward migration of the Alboran domain, and (3) a diffuse Plio-Quaternary compressional reactivation of the margin.
Journal Of Geophysical Research-solid Earth (0148-0027) (Amer Geophysical Union), 2013-08 , Vol. 118 , N. 8 , P. 3899-3916

Droits : 2013. American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00152/26333/24412.pdf
DOI:10.1002/jgrb.50318
http://archimer.ifremer.fr/doc/00152/26333/

Éditeur(s) : American Geophysical Union
Résumé : We use seismic reflection and rock sample data to propose that the first-order physiography of New Caledonia Trough and Norfolk Ridge formed in Eocene and Oligocene time and was associated with the onset of subduction and back-arc spreading at the Australia-Pacific plate boundary. Our tectonic model involves an initial Cretaceous rift that is strongly modified by Cenozoic subduction initiation. Hence, we are able to explain (1) complex sedimentary basins of inferred Mesozoic age; (2) a prominent unconformity and onlap surface of middle Eocene to early Miocene age at the base of flat-lying sediments beneath the axis of New Caledonia Trough; (3) gently dipping, variable thickness, and locally deformed Late Cretaceous strata along the margins of the trough; (4) platform morphology and unconformities on either side of the trough that indicate a phase of late Eocene to early Miocene uplift to near sea level, followed by rapid Oligocene and Miocene subsidence of similar to 1100-1800 m; and (5) seismic reflection facies tied to boreholes that suggest absolute tectonic subsidence at the southern end of New Caledonia Trough by 1800-2200 m since Eocene time. The Cenozoic part of the model involves delamination and subduction initiation followed by rapid foundering and rollback of the slab. This created a deep (>2 km) enclosed oceanic trough, similar to 2000 km long and 200-300 km across, in Eocene and Oligocene time as the lower crust detached, with simultaneous uplift and local land development along basin flanks. Disruption of Late Cretaceous and Paleogene strata was minimal during this Cenozoic phase and involved only subtle tilting and local reverse faulting or folding. Basin formation was possible through the action of at least one detachment fault that allowed the lower crust to either be subducted into the mantle or exhumed eastward into Norfolk Basin. We suggest that delamination of the lithosphere, with possible mixing of the lower crust back into the mantle, is more widespread than previously thought and may be commonly associated with subduction initiation, such as Cenozoic events in the Mediterranean and western Pacific.
Tectonics (0278-7407) (American Geophysical Union), 2010-03 , Vol. 29 , N. TC2004 , P. 1-16

Droits : Copyright 2010 by the American Geophysical Union.
http://archimer.ifremer.fr/doc/00001/11271/9283.pdf
DOI:10.1029/2009TC002476
http://archimer.ifremer.fr/doc/00001/11271/