Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : International audience
The seaward extension of onshore formations and structures were previously almost unknown in Provence. The interpretation of 2D high-resolution marine seismic profiles together with the integration of sea-bottom rock samples provides new insights into the stratigraphic, structural and paleogeographic framework of pre-Messinian Salinity Crisis (MSC) deposits of the Provence continental shelf. Seven post-Jurassic seismic units have been identified on seismic profiles, mapped throughout the offshore Provence area and correlated with the onshore series. The studied marine surface and sub-surface database provided new insights into the mid and late Cretaceous paleogeography and structural framework as well as into the syn-and post-rift deformation in Provence. Thick (up to 2000 m) Aptian-Albian series whose deposition is controlled by E-W-trending faults are evidenced offshore. The occurrence and location of the Upper Cretaceous South-Provence basin is confirmed by the thick (up to 1500 m) basinal series downlaping the Aptian-Albian unit. This basin was fed in terrigenous sediments by a southern massif (" Massif Méridional ") whose present-day relict is the Paleozoic basement and its sedimentary cover from the Sicié imbricate. In the bay of Marseille, thick syn-rift (Rupelian to Aquitanian) deposition occurred (>1000 m). During the rifting phase, syn-sedimentary deformations consist of dominant N040 to N060 sub-vertical faults with a normal component and N050 drag-synclines and anticlines. The syn-rift and early post-rift units (Rupelian to early Burdigalian) are deformed and form a set of E-W-trending en echelon folds that may result from sinistral strike-slip reactivation of N040 to N060 normal faults during a N-S com-pressive phase of early-to-mid Burdigalian age (18-20 Ma). Finally, minor fault reactivation and local folding affect post-rift deposits within a N160-trending corridor localized south of La Couronne, and could result from a later, post-Burdigalian and pre-Pliocene compressive phase.
Cadre tectonostratigraphique des formations anté-pliocènes du plateau continental de Provence (golfe du Lion oriental, SE France) Mots-clés. – Géologie marine, Tectonostratigraphie, Stratigraphie sismique, Paléogéographie crétacée, Rifting oligo-miocène, Compression post-rift Résumé. – Le prolongement en mer des formations et des structures provençales était jusqu'alors largement inconnu.L'interprétation de profils de sismique-réflexion marine 2D et l'intégration de dragages et carottages du fond-marin ont permis d'apporter des éléments nouveaux concernant le cadre stratigraphique, structural et paléogéographique des dé-pôts anté-Messiniens du plateau continental de Provence. Sept unités sismiques post-jurassiques ont été identifiées sur les profils sismiques, cartographiées à travers le plateau continental et corrélées avec les séries affleurant à terre. Une épaisse unité apto-albienne (jusqu'à 2000 m) dont le dépôt est contrôlé par des failles E-W a été mise en évidence en mer. L'existence d'un bassin subsident au Crétacé supérieur sur le plateau continental de Provence a été confirmée par le développement d'une épaisse série de bassin (jusqu'à 1500 m) reposant en downlap sur l'Apto-Albien. Le socle mé-tamorphique de l'écaille de Sicié et sa couverture sédimentaire peut être considéré comme une relique allochtone du « Massif Méridional » ayant alimenté le Bassin sud-provençal en éléments terrigènes au Crétacé supérieur. Dans la rade de Marseille, une épaisse unité syn-rift (Rupélien à Aquitanien) a été mise en évidence (>1000 m), structurée en une série de synformes en échelon d'axe E-W et affectée par des failles d'orientation dominante N040 à N060. Sur le flanc sud des synformes, la formation de plis d'axe N050 est associée à une déformation syn-sédimentaire. La formation des synformes en échelon d'axe E-W résulterait d'une réactivation en décrochement des failles N040 à N060 pendant une phase de compression N-S dont l'âge est compris entre le Burdigalien inférieur et moyen (18-20 Ma). Enfin, les dépôts post-rift sont affectés par des déformations mineures (réactivation de failles et plis associés), le long d'un couloir d'orientation N160 à l'ouest de la baie de Marseille, attribuables à une phase de compression post-burdigalienne et anté-pliocène.
ISSN: 0037-9409

hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727/document
https://hal-amu.archives-ouvertes.fr/hal-01463727/file/Fournier_et_al_Provence_2016.pdf
DOI : 10.2113/gssgfbull.187.4-5.187

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Integrated Ocean Drilling Program Expedition 313 continuously cored uppermost Eocene to Miocene sequences on the New Jersey shallow shelf (Sites M27, M28, and M29). Previously, 15 Miocene (ca. 23-13 Ma) seismic sequence boundaries were recognized on several generations of multichannel seismic profi les using criteria of onlap, downlap, erosional truncation, and toplap. We independently recognize sequence boundaries in the cores and logs based on an integrated study of core surfaces, lithostratigraphy and process sedimentology (grain size, mineralogy, facies, and paleoenvironments), facies successions, stacking patterns, benthic foraminiferal water depths, downhole logs, core gamma logs, and chronostratigraphic ages. We use a velocitydepth function to predict the depths of seismic sequence boundaries that were tested by comparison with major core surfaces, downhole and core logs, and synthetic seismograms. Using sonic velocity (core and downhole), core density, and synthetic seismograms, we show that sequence boundaries correspond with acoustic impedance contrasts, although other stratal surfaces (e.g., maximum fl ooding and transgressive surfaces) also produce refl ections. Core data are suffi cient to link seismic sequence boundaries to impedance contrasts in 9 of 12 instances at Site M27, 6 of 11 instances at Site M28, and 8 of 14 instances at Site M29. Oligocene sequences have minimal lithologic and seismic expression due to deep-water locations on clinoform bottomsets. Miocene sequences (ca. 23-13 Ma) were sampled across several unconformity clinothems (prograding units) on topset, foreset, and bottomset locations. Excellent recovery allows core-seismic integration that confi rms the hypothesis that unconformities are a primary source of impedance contrasts. Our core-seismic-log correlations predict that key seismic surfaces observed in other sub surface investigations without core and/or well logs are stratal surfaces with sequence stratigraphic signifi cance.
EISSN: 1553-040X

insu-00946235
https://hal-insu.archives-ouvertes.fr/insu-00946235
DOI : 10.1130/GES00858.1

Résumé : L’arc des Petites Antilles résulte de la lente subduction vers l'Ouest des plaques Nord et Sud-Américaines sous la plaque Caraïbes (2cm/an). A la latitude de l’archipel guadeloupéen et à ~150 km à l’Ouest du front de déformation, le bassin d'avant-arc de Marie-Galante forme un bassin perché, incliné vers la fosse et limité vers l’Est par un haut-fond, l’Eperon Karukéra. À cette latitude, le bassin de Marie-Galante domine le prisme d’accrétion de la Barbade et fait face à la ride de Tiburon qui balaye la zone du Nord au Sud depuis la fin du Miocène supérieur. Le remplissage sédimentaire du Bassin de Marie-Galante montre des déformations actives au moins depuis ~30 millions d’années. L’objectif du travail est de reconstituer l’évolution tectono-sédimentaire de ce bassin pour apporter de nouvelles contraintes sur la compréhension globale de la zone de subduction frontale des Petites Antilles. Ce travail s'appuie sur les données de bathymétrie multifaisceaux et de sismique réflexion multi-traces haute résolution acquises lors des campagnes du programme KaShallow. Cette base de données, complétée de profils sismiques plus basse résolution de campagnes antérieures, permet d’avoir une couverture pseudo 3D et à quatre échelles de résolution de l'ensemble du bassin. Un échantillonnage par ROV et carottage ciblé a fourni 40 prélèvements dans les principales unités sismiques. Les analyses pétrologiques et les datations biostratigraphiques autorisent des reconstitutions paléo-environnementales depuis le Paléogène supérieur jusqu’à Actuel. L’interprétation sismique multi-échelle montre un bassin sédimentaire atteignant ~4,5s temps double (~4500 à 5625 m) sur un substratum magmatique pré-structuré. Ce bassin est composé de 5 grands ensembles sédimentaires (E-1, E1, E2, E3 et E4) subdivisés en 13 unités limitées par 14 surfaces de discontinuités. L’organisation séquentielle des unités sismiques permet de mettre en évidence 10 séquences de dépôts de troisièmes ordres (S-1 à S9). Le calage biostratigraphique de l’ensemble des séquences permet de proposer une évolution tectono-sédimentaire du bassin de l’Éocène à l’Actuel. Ainsi, nous distinguons quatre systèmes de failles normales associées à trois phases d’extensions qui contrôlent l’évolution architecturale et sédimentaire du bassin. 1/ Un système N050±10°E hérité, actif dès le Paléogène supérieur, qui contrôle le basculement général du bassin vers le SSE. Il est responsable de la formation de l'escarpement de Désirade d’environ 4500 m de dénivelé. Cette première extension est interprétée comme résultant de la fragmentation de l'avant-arc en réponse à l'augmentation du rayon de courbure de la zone de subduction. 2/ Un système N130°-N150°E, structurant à l’échelle de l’Éperon Karukéra, qui contrôle la sédimentation dès le Miocène inférieur et marque une première phase d'extension transverse à l’arc. 3/ Un système N160°-N180°E qui segmente le Bassin de Marie-Galante en un sous-bassin à l'Ouest et l'Éperon Karukéra à l'Est. Cette seconde extension, globalement perpendiculaire à la marge, s'accompagne d’une subsidence et d'une inversion de la polarité du bassin en réponse à son basculement vers la fosse qui débute au cours du Miocène moyen et se poursuit actuellement à l'Est du bassin. Cette évolution à long terme de l'avant-arc, concomitante avec le recul de l'arc volcanique vers l’Ouest, est considérée comme résultant d’une érosion basale de la plaque supérieure. 4/ Un système N090±10°E plus tardif est localisé au centre du bassin et qui contrôle le développement de plates-formes carbonatées néritiques sur certaines têtes de blocs, comme par exemple à Marie-Galante. Cette dernière extension, parallèle à l’arc, se manifeste dans le bassin à partir du Pliocène inférieur. Elle se superpose au régime d'extension perpendiculaire à l'avant-arc et est interprétée comme l'accommodation du partitionnement de la déformation en réponse à l’obliquité croissante du front subduction vers le Nord.
The Lesser Antilles result of the slow westward subduction of the North and South American plate under the Caribbean plate (2 cm / year). At the latitude of the Guadeloupe archipelago and ~ 150 km to the west of the deformation front, the fore-arc basin of Marie-Galante forms a perched basin tilted to the pit and limited to the East by a shoal, the Spur Karukéra. At this latitude, Marie-Galante basin dominates the accretionary prism of Barbados and faces wrinkle Tiburon sweeping the area from North to South from the late Miocene. The sedimentary fill Basin Marie-Galante shows active deformation since at least ~ 30 million years. The aim of the work is to reconstruct the tectono-sedimentary evolution of the basin to provide new constraints on the overall understanding of the frontal subduction zone Lesser Antilles. This work relies on multibeam bathymetry data and high-resolution seismic reflection multi-traces acquired during campaigns KaShallow program. This database, supplemented by lower resolution of previous campaigns seismic profiles, provides a pseudo-3D coverage and four scales of resolution of the entire basin. ROV sampling and targeted core provided 40 samples in the main seismic units. Petrological analysis and biostratigraphic dating allow paleoenvironmental reconstructions from the upper Paleogene up Actuel. Seismic interpretation multiscale shows a sedimentary basin reaching ~ 4,5s double (~ 4500-5625 m) on a substrate pre-structured magma. This basin consists of 5 main sedimentary units (E-1, E1, E2, E3 and E4) divided into 13 units bounded by discontinuities 14 surfaces. The sequential organization of seismic units allows to highlight sequences 10 deposits of third order (S-1 to S9). The biostratigraphic calibration of all sequences able to offer a tectono-sedimentary evolution of the Eocene basin to Present. Thus, we distinguish four normal fault systems associated with three phases of extensions that control the architectural and sedimentary evolution of the basin. 1 / A system N050 ± 10 ° E inherited assets from the upper Paleogene, which controls the overall pelvic tilt towards the SSE. He is responsible for the formation of the escarpment Désirade about 4500 m elevation. The first extension is interpreted as resulting from the fragmentation of the fore-arc in response to the increase in the radius of curvature of subduction. 2 / A system N130 ° -N150 ° E, structuring across the Spur Karukéra, which controls sediment from the Miocene and marks the first phase of transverse extension arc. 3 / A system N160 ° E ° -N180 which segments Basin Marie-Galante in a sub-basin to the west and the Spur Karukéra in the East. This second extension, generally perpendicular to the margin, is accompanied by subsidence and reversing the polarity of the basin in response to his switch to the pit, beginning during the Middle Miocene and is ongoing in the East the basin. This long-term evolution of the forearc, concurrent with the decline in volcanic arc to the west, is considered as resulting from a basal erosion of the top plate. 4 / A system N090 ± 10 ° later E is located in the center of the basin and controlling the development of neritic carbonate platforms on certain blocks heads, such as Marie-Galante. This latest extension, parallel to the arc occurs in the basin from the lower Pliocene. It is superimposed on the expansion plan perpendicular to the fore-arc and is interpreted as the accommodation of the partitioning of deformation in response to the increasing obliquity front subduction north.

http://www.theses.fr/2014AGUY0799/document

Éditeur(s) : Springer
Résumé : The Golo Margin in eastern Corsica is dissected by four canyons and two gullies which fed turbidite systems. Study of the dispersal of surficial sediments and flow dynamic in the Golo system is based on Kullenberg and interface cores interpreted in relation to a previously published seismic dataset. Cores were described in detail and interpreted within a sedimentary and stratigraphic framework. During the last 42,000 years, gravity processes which occurred in the large systems with a canyon source were mainly slide-induced, differentiated turbulent surges and hyperpycnal flows. Processes occurring in the small system with a gully source are mainly hyperconcentrated and concentrated flows. Deposits from the Corsican Margin can intercalate with products of processes triggered on the Pianosa Ridge located in the eastern part of the basin. During relative sea-level lowstands or during periods of rapid or high-amplitude sea-level fall, only large canyons (South and North Golo) are supplied by carbonate-rich hyperconcentrated and concentrated flows which are channelled in incised valleys on the shelf. During periods of slow or low-amplitude sea-level fall and during sea-level rise, sediments are trapped on a shelf delta and intensely winnowed by shelf hydrodynamic processes. Sand-rich hyperconcentrated and concentrated flows occur. All the systems fed by a canyon are active simultaneously. Gullies form and are active only during periods of sea-level rise. During relative highstands of sea level (Holocene), all the system is draped by hemipelagic sediments. Relative sea-level changes and canyon location relative to river mouths have a strong influence on the nature of sediment input, and the initiation and type of gravity flows which, in turn, control morphology and geometry.
Geo-Marine Letters (0276-0460) (Springer), 2006-12 , Vol. 26 , N. 6 , P. 373-395

Droits : 2006 Springer
http://archimer.ifremer.fr/doc/2006/publication-3594.pdf
DOI:10.1007/s00367-006-0045-z
http://archimer.ifremer.fr/doc/00000/3594/

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
We present here a synthesis of the evolution of rifted continental margin systems in the Gulf of Aden. These margins are volcanic to the west of the Gulf of Aden, where they are influenced by the Afar hotspot, and non-volcanic east of longitude 46° E. The combined use of magnetics, gravity, seismic reflection, field observations (tectonic, stratigraphic and sedimentological) and oil well data allowed us to obtain better constraints on the timing of continental rifting and seafloor spreading. From the Permo-Triassic to the Oligocene, the Arabian-African plate was subject to distributed extension, probably due, at least from the Cretaceous, to tensile stresses related to the subduction of the Tethysian slab in the north. In Late Eocene-Early Oligocene, 34-33 Ma ago, rifting started to localise along the future area of continental breakup. Initially guided by the inherited basins, continental rifting then occurred synchronously over the entire gulf before becoming localised on the northern and southern borders of the inherited grabens, in the direction of the Afar hotspot. In the areas with non-volcanic margins (in the east), the faults marking the end of rifting trend parallel to the inherited grabens. Only the transfer faults cross-cut the inherited grabens, and some of these faults later developed into transform faults. The most important of these transform faults follow a Precambrian trend. Volcanic margins were formed in the west of the Gulf, up to the Guban graben in the southeast and as far as the southern boundary of the Bahlaf graben in the northeast. Seaward dipping reflectors can be observed on many oil industry seismic profiles. The influence of the hotspot during rifting was concentrated on the western part of the gulf. Therefore, it seems that the western domain was uplifted and eroded at the onset of rifting, while the eastern domain was characterised by more continuous sedimentation. The phase of distributed deformation was followed by a phase of strain localisation during the final rifting stage, just before formation of the Ocean-Continent Transition (OCT), in the most distal graben (DIM graben). About 20 Ma ago, at the time of the continental break-up, the emplacement of the OCT started in the east with exhumation of the subcontinental mantle. Farther west, the system was heated up by the strong influence of the Afar hotspot, which led to breakup with much less extension. In the Gulf of Aden (s.str), up to the Shukra El Sheik fracture zone, oceanic spreading started 17.6 Ma ago. West of this fracture zone, oceanic accretion started 10 Ma ago, and 2 Ma ago in the Gulf of Tadjoura. Post-rift deformation of the eastern margins of the Gulf of Aden can be seen in the distal and proximal domains. Indeed, the substantial post-rift uplift of these margins could be associated with either the continental break-up, or activity of the Afar hotspot and related volcanic/magmatic activity. Uplift of the northern proximal margin was still active (e.g. stepped beach rocks exposed at 60 m of 2 Ma; 30 m of 35,200 years; 10 and 2 m) and active volcanoes can be inferred at depths of between 70 and 200 km beneath the margin (at 5-10 km distance from the coast). On the distal margin, heat flow measurements show a high value that is associated with post-rift volcanic activity and the development of a volcano (with flows and sills) shortly after the formation of the OCT. The Afar hotspot is therefore important for several reasons. It allows the localisation of deformation along the Red Sea/Aden system and the rapid opening of the Gulf after the continental break-up; its influence also seems to persist during the post-rift period.
ISSN: 1866-7411

hal-01053089
https://hal.archives-ouvertes.fr/hal-01053089
DOI : 10.1007/s12517-011-0475-4

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : In the western Mediterranean Sea, the Liguro-Provençal Basin (LPB) is a key area for studying passive margins because of its recent formation and abundance of onshore and offshore data. The Nerthe area located in the northern margin of LPB provides the unique continuous Oligo-Miocene deposits contemporaneous of the transition rifting to drifting. However, the age of the deposits remains debated and the link between outcrops and offshore seismic data is poorly constrained. The purpose of this paper is double. First, we intend to propose a new chronostratigraphic frame based on bio- (planktonic foraminifera, calcareous nannofossils) and magneto-stratigraphy. Second, we aim to make, through the integration of new highly time-resolved seismic data and field works, a coherent onshore-offshore link concretized by a 3D geological model. The new temporal and spatial data presented in this paper allow correlating the Oligo-Miocene sequences, defining their geometry and specifying precisely the timing of syn- and post-rift stages. The first marine transgression is now precisely dated latest Chattian within the syn-rift deposits and appears to be synchronous with the first marine deposits in the offshore wells and other marginal basins. The transition from syn-rift to post-rift appears to last 3.3 Ma at maximum, between 21.8 and 18.5 Ma (late Aquitanian to early Burdigalian). It is underlined by two major erosional unconformities bearing a hiatus of around 1 Ma. The post-rift started with a major marine transgression that is now dated from middle Burdigalian, at around 18.5 Ma, as elsewhere in the LPB. Contrarily to recent proposals, the post-rift deposits are widely represented on the northeastern margin of the "Golfe du Lion". There, the subsidence of the margin was low during the syn-rift and the transitional periods and high during the post-rift. The onset of this high post-rift subsidence appears to be synchronous with the slowdown of the Corsica-Sardinia block (CSb) motion.
EISSN: 1777-5817

hal-00558497
https://hal.archives-ouvertes.fr/hal-00558497
DOI : 10.2113/gssgfbull.181.6.591

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
3D seismic data located in the Gjallar Ridge (Vøring Basin, offshore Norway) reveals a closely-spaced polygonal fault system affecting more than 800 m of homogeneous mud-dominated Quaternary and Tertiary sequences. As some faults reach the modern seafloor, they represent an active polygonal fault system at present day. Even if the processes remain unclear and are still under debate, it is generally agreed that the initiation of polygonal faults is the result of shallow burial dewatering of fine-grained unconsolidated sediments by volumetric compaction. 3D seismic data are commonly interpreted by propagating horizons automatically and by picking faults manually. However, in the case of polygonal fault intervals, this approach is time consuming due to the huge number of faults and because automatic propagation can be misleading. In this study, we applied a new technique of 3D seismic interpretation based on a sequential stratigraphy analysis, using the new PaleoScan© software (Eliis Company). It allowed us to build a 3D geological model computing more than 300 horizons within the faulted intervals. We then used the coherency attribute, depicting anomalies in the shape of seismic waveform like faults, in order to constrain a possible link between fault distribution and stratigraphic levels. Our approach allows fault throws to be calculated in milliseconds on any polygonal fault plane. The result shows that fault segments have been reactivated by dip-linkage. Distribution of faults depends on mechanical units, intervals characterized by different petrophysical properties, which are independent from lithological and diagenetic changes. According to these results, we propose a model showing the evolution of polygonal fault intervals in which faulting stages are separated by a quiescence phase during burial. A first tier of polygonal faults is initiated at a specific depth, according to the Cam-clay model. Then, following a period of quiescence during which mud-rich sediments continued to accumulate, new fault segments are initiated above the first mechanical unit and within this undeformed interval. New nucleated faults then connect downward to pre-existing underlying polygonal fault system, thus progressively increasing the thickness of the faulted interval.
ISSN: 0025-3227

hal-00772470
https://hal.archives-ouvertes.fr/hal-00772470
DOI : 10.1016/j.margeo.2012.07.016

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : Based on a High-Resolution 3D seismic block acquired in the Gulf of Lion in 2004–2005 we investigated fluid pipes and pockmarks on the top of the interfluve between the Hérault canyon and the Bourcart canyon both created by turbidity currents and gravity flows from the shelf to the deep basin in the north-western Mediterranean Sea. Combining the geometry of the potential fluid pipes with the induced deformation of surrounding sediments leads then to the ability to differentiate between potential fluid sources (root vs source) and to better estimate the triggering mechanisms (allochtonous vs. autochtonous cause). We linked together a set of derived attributes, such as Chaos and RMS amplitude, to a 3D description of pipes along which fluids may migrate. As previously shown in other basins, the induced deformation, creating cone in cone or V-shaped structures, may develop in response to the fluid pipe propagation in unconsolidated sediments in the near surface. The level at the top of a cone structure is diachronous. It means that stratigraphic levels over this surface are deformed at the end of the migration. They collapse forming a depression called a pockmark. These pipes are the result of repeated cycles of fluid expulsion that might be correlated with rapid sea-level rise instead of sediment loading. The most recent event (MIS 2.2 stage) has led to the formation of a pockmark on the modern seafloor. It has been used as a reference for calculating the effect of a rapid sea-level rise on fluid expulsion. As all physical and geometrical parameters are constrained, we were able to define that a + 34 m of sea level rise may account for triggering fluid expulsion from a very shallow silty-sandy layer at 9 m below seafloor since the last glacial stage. This value is consistent with a sea level rise of about 102 m during this period. This study shows that the episodic nature of fluid release resulted from hydromechanical processes during sea-level rise due to the interactivity between high pressure regimes and principal in situ stresses.
ISSN: 0037-9409

hal-01667241
https://hal.archives-ouvertes.fr/hal-01667241
DOI : 10.1051/bsgf/2017190

Éditeur(s) : American Geophysical Union
Résumé : We use seismic reflection and rock sample data to propose that the first-order physiography of New Caledonia Trough and Norfolk Ridge formed in Eocene and Oligocene time and was associated with the onset of subduction and back-arc spreading at the Australia-Pacific plate boundary. Our tectonic model involves an initial Cretaceous rift that is strongly modified by Cenozoic subduction initiation. Hence, we are able to explain (1) complex sedimentary basins of inferred Mesozoic age; (2) a prominent unconformity and onlap surface of middle Eocene to early Miocene age at the base of flat-lying sediments beneath the axis of New Caledonia Trough; (3) gently dipping, variable thickness, and locally deformed Late Cretaceous strata along the margins of the trough; (4) platform morphology and unconformities on either side of the trough that indicate a phase of late Eocene to early Miocene uplift to near sea level, followed by rapid Oligocene and Miocene subsidence of similar to 1100-1800 m; and (5) seismic reflection facies tied to boreholes that suggest absolute tectonic subsidence at the southern end of New Caledonia Trough by 1800-2200 m since Eocene time. The Cenozoic part of the model involves delamination and subduction initiation followed by rapid foundering and rollback of the slab. This created a deep (>2 km) enclosed oceanic trough, similar to 2000 km long and 200-300 km across, in Eocene and Oligocene time as the lower crust detached, with simultaneous uplift and local land development along basin flanks. Disruption of Late Cretaceous and Paleogene strata was minimal during this Cenozoic phase and involved only subtle tilting and local reverse faulting or folding. Basin formation was possible through the action of at least one detachment fault that allowed the lower crust to either be subducted into the mantle or exhumed eastward into Norfolk Basin. We suggest that delamination of the lithosphere, with possible mixing of the lower crust back into the mantle, is more widespread than previously thought and may be commonly associated with subduction initiation, such as Cenozoic events in the Mediterranean and western Pacific.
Tectonics (0278-7407) (American Geophysical Union), 2010-03 , Vol. 29 , N. TC2004 , P. 1-16

Droits : Copyright 2010 by the American Geophysical Union.
http://archimer.ifremer.fr/doc/00001/11271/9283.pdf
DOI:10.1029/2009TC002476
http://archimer.ifremer.fr/doc/00001/11271/

Éditeur(s) : Elsevier
Résumé : High-resolution reflection and refraction seismic data were collected in 2004 to investigate, in further detail than allowed by pre-existing low resolution seismic data, the nature of a Bottom Simulating Reflector (BSR) that extends over a broad area of the Fairway Basin, a rifted, continental structure located on the eastern flank of the Lord Howe Rise, to the southwest of New Caledonia. Two main reflectors are documented: the shallower (RN) mimics the seafloor and has a negative polarity while the deeper (RP) does not always mimic the seafloor and has a positive polarity. Using the existing regional seismic lines, we can show that reflector RN can be continuously followed up to DSDP 208 drill hole site. Reflector RP is discontinuous and cannot be traced to DSDP 208. Based on DSDP 208 stratigraphic data, Reflector RN is assigned to the Eocene/Oligocene regional unconformity; reflector RP is interpreted in terms of a diagenetic BSR, likely related to an Opal-A/Opal-CT transition front. Heat flow data collected in 2006 suggest that reflector RP lies too deep to be related to methane hydrates, strengthening our interpretation that RP is of diagenetic origin.
Marine Geology (0025-3227) (Elsevier), 2009-10 , Vol. 266 , N. 1-4 , P. 80-90

Droits : 2009 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-7321.pdf
DOI:10.1016/j.margeo.2009.07.014
http://archimer.ifremer.fr/doc/00000/7321/

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
In this study, a novel application of a statistical approach is utilized for analysis of downhole logging data from Miocene-aged siliciclastic shelf sediments on the New Jersey Margin (eastern USA). A multivariate iterative nonhierarchical cluster analysis (INCA) of spectral gamma-ray logs from Integrated Ocean Drilling Program (IODP) Expedition 313 enables lithology within this siliciclastic succession to be inferred and, through comparison with the 1311 m of recovered core, a continuous assessment of depositional sequences is constructed. Signifi cant changes in INCA clusters corroborate most key stratigraphic surfaces interpreted from the core, and this result has particular value for surface recognition in intervals of poor core recovery. This analysis contributes to the evaluation of sequence stratigraphic models of large-scale clinoform complexes that predict depositional environments, sediment composition, and stratal geometries in response to sea-level changes. The novel approach of combining statistical analysis with detailed lithostratigraphic and seismic refl ection data sets will be of interest to any scientists working with downhole logs, especially spectral gamma-ray data, and also provides a reference for the strengths and weaknesses of multi component analysis applied to continental margin lithofacies. The method presented here is appropriate for evaluating successions elsewhere and also has value for hydrocarbon exploration where sequence stratigraphy is a fundamental tool.
EISSN: 1553-040X

insu-00858238
https://hal-insu.archives-ouvertes.fr/insu-00858238
DOI : 10.1130/GES00913.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The barrier reef tract of New Caledonia is the second largest in the world enclosing lagoons of variable width. The Late Quaternary evolution of these barrier reefs and lagoons is poorly known. A recent high resolution seismic and multibeam bathymetry survey was carried out in the south-western lagoon from shoreline to open ocean across the barrier reef pass systems to perform sequence stratigraphy and to better understand the Quaternary evolution of the lagoon. Two depositional sequences bounded by type-1 erosional surfaces can be identified. The bounding surfaces delineate the bottom of two generations of incised valleys. System tracts comprising a complete succession of regressive, lowstand, transgressive and highstand tracts were observed only in the upper sequence. Chronostratigraphic and sedimentological interpretations of the seismic data are based on correlations with the chronology defined in the nearby cores drilled through the reefs and in the gravity cores previously recovered in the inner lagoon. Interpretation of seismic data is also carried out on the basis of correlation with multibeam bathymetric data. Our results indicate that the history of the New Caledonian lagoon probably does not exceed 200ka marked by two or three brief episodes each of immersion of about ten thousand years. The bathymetric data reveal that during successive low sea level stands, the lagoon was dependent upon erosional fluvial networks. The deep fluvial valleys were connected to the continental slope through the passes. Seismic records reveal that upstream palaeo-channels are not connected to the modern coastal rivers. In contrast, many aggrading deposits, including numerous stacking channels, and extending across the proximal part of the outer lagoon, can be identified. Examination of drainage network morphology suggests a progressive tilt of the outer lagoon. Such evolution reveals that the Nouméa lagoon which is one of the widest in the world is an exceptional modern example of a rimmed shelf providing data to analyze the past counterparts.
ISSN: 0031-0182

insu-00338953
https://hal-insu.archives-ouvertes.fr/insu-00338953
DOI : 10.1016/j.palaeo.2008.08.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Reef positions record the interaction between eustasy and tectonics, and have been used worldwide to characterize vertical deformations of upper-plates at different time-scales and constrain the seismic behavior of megathrusts. Along the Lesser Antilles volcanic arc, high-resolution marine geophysical data were collected on the 2–20 km wide eastern Martinique reef platform to reconstruct its stratigraphic and morphologic history, and understand the influence of local normal faulting, volcanism and plate-scale subduction processes on Holocene and Late Pleistocene reef development. The subsiding Martinique platform's stratigraphy is composed of multiple superimposed sea-level highstand deposits separated by subaerial exposure surfaces of sea-level low stands. The carbonate platform consists of two laterally-extensive carbonate units (unit U2 overlying unit U3) that extend to the platform edge to a depth of − 95 m MSL (mean sea level), and form two morphologic terraces, M2 and M3 respectively. The landward portion of unit U2 is partially overlain between 0 and − 60 m MSL by the living reef tract U1. The current reef is composed of a landward fringing reef, a lagoon and a seaward barrier reef, the latter forming a double-bank barrier around the Caravelle Peninsula. In near-shore multi-channel seismic profiles, a distinct reflector at ~− 35 m MSL, probably a subaerial exposure surface E1, separates the reef sequence formed during the last transgression from a Pleistocene fossil reef tract forming unit U2. Offshore of Mount Pelée volcano (Late Pleistocene), the Holocene reef did not develop above unit U2, whose upper surface is incised by channels and apparent sinkholes. During the Holocene transgression, the possibility of excessive turbidity due to volcanic activity may have inhibited reef development in this area. The un-dated unit U2 probably developed 120–130 ka ago during the last interglacial (MIS 5.5) + 6 m MSL highstand as thick, extensive reefs deposited all along the Lesser Antilles arc. Due to subsidence, MIS 5.5 reefs are not represented by onshore facies, except along the southern Sainte Anne Peninsula where normal faulting and uplift balances island-scale subsidence. Based on unit U2's present elevation and assuming an MIS 5.5 age and + 6 m MSL sea level, Martinique has subsided at maximum 0.3 m/ky, likely due to subduction processes that question the coupling state of the megathrust.
ISSN: 0025-3227

hal-01307036
https://hal.archives-ouvertes.fr/hal-01307036
DOI : 10.1016/j.margeo.2015.08.001

Éditeur(s) : AGU
Résumé : New, high-quality multichannel seismic reflection data from the western New Caledonia offshore domain allow for the first time the direct, continuous connection of seismic reflectors between the Deep Sea Drilling Project 208 drill hole on the Lord Howe Rise and the New Caledonia Basin. A novel seismic interpretation is hence proposed for the northern New Caledonia Basin stratigraphy, which places the Eocene/Oligocene unconformity deeper than previously thought and revisits the actual thickness of the pre-Oligocene sequences. A causal link is proposed between the obduction of the South Loyalty Basin over New Caledonia (NC) and the tectonic history of the northern New Caledonia Basin. Here it is suggested that as the South Loyalty Basin was being obducted during early Oligocene times, the NC Basin subsided under the effect of the overloading and underthrusted to accommodate the compressional deformation, which resulted in (1) the uplift of the northern Fairway Ridge and (2) the sinking of the western flank of New Caledonia. This event also had repercussions farther west with the incipient subsidence of the Lord Howe Rise.
Tectonics (0278-7407) (AGU), 2008-12 , Vol. 27 , N. TC6006 , P. 1-20

Droits : 2008 American Geophysical Union
http://archimer.ifremer.fr/doc/2008/publication-4782.pdf
DOI:10.1029/2008TC002263
http://archimer.ifremer.fr/doc/00000/4782/

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
On the New Jersey shelf (offshore North America), the presence of pore water fresher than seawater is known from a series of boreholes completed during the 1970s and 1980s. To account for this fresh water, a fi rst hypothesis involves possible present-day active dynamic connections with onshore aquifers, while a second involves meteoritic and/or sub- ice-sheet waters during periods of lowered sea level. Expedition 313 drilled three boreholes on the middle shelf, offering a unique opportunity for the internal structure of the siliciclastic system to be accessed, at scales ranging from the depositional matrix to the continental margin. This enables the stratigraphic architecture to be correlated with the spatial distribution and salinity of saturating fl uids. Expedition 313 revealed both very low salinities (<3 g/L) at depths exceeding 400 m below the seafl oor and evidence for a multilayered reservoir organization, with freshand/ or brackish-water intervals alternating vertically with salty intervals. In this study we present a revised distribution of the salinity beneath the middle shelf. Our observations suggest that the processes controlling salinity are strongly infl uenced by lithology, porosity, and permeability. Saltier pore waters generally occur in coarse-grained intervals and fresher pore waters occur in fi ne-grained intervals. The transition from fresher to saltier intervals is often marked by cemented horizons that probably act as permeability barriers. In the lowermost parts of two holes, the salinity varies independently of lithology, suggesting different mechanisms and/or sources of salinity. We present an interpretation of the sedimentary facies distribution, derived from core, logs, and seismic profi le analyses, that is used to discuss the marginscale two-dimensional reservoir geometry and permeability distribution. These proposed geometries are of primary importance when considering the possible pathways and emplacement mechanisms for the fresh and salty water below the New Jersey shelf.
EISSN: 1553-040X

insu-00858241
https://hal-insu.archives-ouvertes.fr/insu-00858241
DOI : 10.1130/GES00855.1

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Selected high-resolution seismic-reflection profiles and multibeam bathymetry acquired along the convergent Ecuador margin during the ATACAMES cruise on onboard the R/V L’Atalante (Jan.15–Feb.18, 2012) allow a preliminary evaluation of the neotectonic development and stratigraphic evolution of the margin based on the sismo-stratigraphic analysis of Quaternary sediment preserved on the margin shelf and upper slope. We present three major preliminary results. (1) The evolution of the Esmeraldas, Guayaquil and Santa Elena canyons. The head of the Esmeraldas canyon is the location of a continuous significant sediment transport. The Guayaquil canyon shows several episodes of deposition and incision. Aggrading sedimentation pattern in the canyon records several changes in relative sea-level. The subsidence of the Gulf of Guayaquil probably contributes to the good preservation of the canyon filling stages. The Santa Elena canyon is controlled by a SW–NE trending normal fault. (2) Variations of sediment accumulation and relative vertical motions are shown along-strike the shelf edge. Offshore the uplifted Manta peninsula, a pronounced subsidence of the shelf edge is documented by sedimentary clinoforms that have deposited in a morphological reentrant, and have migrated upslope testifying of a local subsidence meanwhile the adjacent La Plata Island area underwent uplift. In the Esmeraldas canyon area, a local uplift of the shelf is documented. (3) Two neotectonic fault systems with a possible transcurrent component are imaged across the shelf edge and upper margin slope offshore Jama, and Cape Galera. This possible transcurrent motion could be related to the reactivation of ancient faults of the upper plate by the subduction. These preliminary results indicate that the ATACAMES data set has a strong potential to evaluate the spatial and temporal contribution of tectonic and climate changes on the structural development and stratigraphic evolution of the Ecuador continental margin.
ISSN: 0025-3235

insu-01131151
https://hal-insu.archives-ouvertes.fr/insu-01131151
DOI : 10.1007/s11001-014-9231-y

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The contourite depositional system (CDS) along the southwestern Iberian Margin (SIM), within the Gulf of Cadiz and offshore areas of western Portugal bear the unmistakable signal of Mediterranean Outflow Water (MOW) exiting the Strait of Gibraltar. This locality records key information concerning the effects of tectonic activity on margin sedimentation, the effects of MOW dynamics on Atlantic circulation, and how these factors may have influenced global climate. Over the last four decades, numerous studies have been conducted on the late Miocene, Pliocene and Quaternary sedimentary stacking pattern of Neogene basins along the SIM for both academic and resources exploration purposes. However, understanding of the region rests primarily on basic seismic stratigraphy calibrated with limited data from only a few exploration wells. The Integrated Ocean Drilling Program (IODP) Expedition 339 recently drilled five sites in the Gulf of Cadiz and two sites on the western Iberian margin. The integration of core and borehole data with other geophysical databases leads us to propose a new stratigraphic framework. Interpretation of IODP Exp. 339 data along with that from industry sources and onshore outcrop analysis helps refine our understanding of the SIM's sedimentary evolution.We identify significant changes in sedimentation style and dominant sedimentary processes, coupled with widespread depositional hiatuses along the SIM within the Cadiz, Sanlucar, Doñana, Algarve and Alentejo basins. Following the 4.5 Ma cessation of a previous phase of tectonic activity related to the Miocene–Pliocene boundary, tectonics continued to influence margin development, downslope sediment transport and CDS evolution. Sedimentary features indicate tectonic pulses of about 0.8–0.9 Ma duration with a pronounced overprint of ~ 2–2.5 Ma cycles. These more protracted cycles relate to the westward rollback of subducted lithosphere at the convergent Africa-Eurasia plate boundary as its previous NW–SE compressional regime shifted to a WNW–ESE direction. Two major compressional events affecting to the Neogene basins at 3.2–3 Ma and 2–2.3 Ma help constrain the three main stages of CDS evolution. The stages include: 1) the initial-drift stage (5.33–3.2 Ma) with a weak MOW, 2) a transitional-drift stage (3.2–2 Ma) and 3) a growth-drift stage (2 Ma-present time) with enhanced MOW circulation into the Atlantic and associated contourite development due to greater bottom-current velocity. Two minor Pleistocene discontinuities at 0.7–0.9 Ma and 0.3–0.6 Ma record the effects of renewed tectonic activity on basin evolution, appearing most prominently in the Doñana basin. Several discontinuities bounding major and minor units appear on seismic profiles. Quaternary records offer the clearest example of this, with major units of about 0.8–0.9 Ma and sub-units of 0.4–0.5 Ma. Sedimentation is controlled by a combination of tectonics, sediment supply, sea-level and climate. This research identifies time scales of tectonic controls on deep-marine sedimentation, specifically over periods of 2.5–> 0.4 Ma. Shorter-term climatic (orbital) mechanisms control sedimentation at time scales of ≤ 0.4 Ma. The role of bottom water circulation and associated processes in shaping the seafloor and controlling the sedimentary stacking pattern on continental margins has to be seriously reconsidered in future multidisciplinary studies. This is not only because of the common occurrence of sandy contourite deposits in deep water setting and their economic interest for hydrocarbon exploration, but principally because they archive the heartbeat of the interior Earth and therefore have important sedimentary and paleoceanographic implications.
ISSN: 0025-3227

hal-01356166
https://hal.archives-ouvertes.fr/hal-01356166
DOI : 10.1016/j.margeo.2015.09.013

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD
Résumé : 38 pages
Rapport
The Chicxulub impact crater, México, is unique. It is the only known terrestrial impact structure that has been directly linked to a mass extinction event and the only terrestrial impact with a global ejecta layer. Of the three largest impact structures on Earth, Chicxulub is the best preserved. Chicxulub is also the only known terrestrial impact structure with an intact, unequivocal topographic peak ring. Chicxulub’s role in the Cretaceous/Paleogene (K-Pg) mass extinction and its exceptional state of preservation make it an important natural laboratory for the study of both large impact crater formation on Earth and other planets and the effects of large impacts on the Earth’s environment and ecology. Our understanding of the impact process is far from complete, and despite more than 30 years of intense debate, we are still striving to answer the question as to why this impact was so catastrophic.During International Ocean Discovery Program (IODP) Expedition 364, Paleogene sediments and lithologies that make up the Chicxulub peak ring were cored to investigate (1) the nature and formational mechanism of peak rings, (2) how rocks are weakened during large impacts, (3) the nature and extent of post-impact hydrothermal circulation, (4) the deep biosphere and habitability of the peak ring, and (5) the recovery of life in a sterile zone. Other key targets included sampling the transition through a rare midlatitude section that might include Eocene and Paleocene hyperthermals and/or the Paleocene/Eocene Thermal Maximum (PETM); the composition and character of the impact breccias, melt rocks, and peak-ring rocks; the sedimentology and stratigraphy of the Paleocene–Eocene Chicxulub impact basin infill; the chronology of the peak-ring rocks; and any observations from the core that may help us constrain the volume of dust and climatically active gases released into the stratosphere by this impact. Petrophysical property measurements on the core and wireline logs acquired during Expedition 364 will be used to calibrate geophysical models, including seismic reflection and potential field data, and the integration of all the data will calibrate impact crater models for crater formation and environmental effects. The proposed drilling directly contributes to IODP Science Plan goals:Climate and Ocean Change: How resilient is the ocean to chemical perturbations? The Chicxulub impact represents an external forcing event that caused a 75% level mass extinction. The impact basin may also record key hyperthermals within the Paleogene.Biosphere Frontiers: What are the origin, composition, and global significance of subseafloor communities? What are the limits of life in the subseafloor? How sensitive are ecosystems and biodiversity to environmental change? Impact craters can create habitats for subsurface life, and Chicxulub may provide information on potential habitats for life, including extremophiles, on the early Earth and other planetary bodies. Paleontological and geochemical studies at ground zero will document how large impacts affect ecosystems and effects on biodiversity.Earth Connections/Earth in Motion: What are the composition, structure and dynamics of Earth’s upper mantle? What mechanisms control the occurrence of destructive earthquakes, landslides, and tsunami? Mantle uplift in response to impacts provides insight into dynamics that differ between Earth and other rocky planets. Impacts generate earthquakes, landslides, and tsunami, and scales that generally exceed plate tectonic processes yield insight into effects, the geologic record, and potential hazards.IODP Expedition 364 was a Mission Specific Platform expedition to obtain subseabed samples and downhole logging measurements from the sedimentary cover sequence and peak ring of the Chicxulub impact crater. A single borehole was drilled into the Chicxulub impact crater on the Yucatán continental shelf, recovering core from 505.7 to 1334.73 m below seafloor with ~99% core recovery and acquiring downhole logs for the entire depth.
International Ocean Discovery Program

hal-01639520
https://hal.archives-ouvertes.fr/hal-01639520
DOI : 10.14379/iodp.pr.364.2017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The interpretation of high-resolution 2D marine seismic profiles together with the analysis of sea-bottom cores allowed a stratigraphic and structural framework of the Provence continental shelf to be proposed. The integration of onshore and offshore stratigraphy, structure and geomorphology provided new insights into Messinian paleotopography and paleohydrography. A geological map of the offshore Provence continental shelf, isobath map of the base Plio-Quaternary surface are presented for the first time in this area. The base Plio-Quaternary surface is a polyphased unconformity that is composed of deep canyons developed by fluvial erosion during the Messinian event, and wave-cut surfaces formed during post-Messinian transgressions. The study evidenced a deep, E-W-trending canyon (Bandol canyon) connected to the head of the Cassidaigne canyon, and filled with up to 600 m-thick Plio-Quaternary deposits. The development of canyons on the Provence margin during the Messinian event was dominantly controlled by the lithology and structure of pre-Messinian formations. A map of the Messinian paleo-drainage network is proposed to explain the presence of deep canyons in the Eastern area and the lack of incision in the Western area. An underground karst drainage scheme is proposed, linked with the current submarine Port-Miou spring.
ISSN: 0264-8172

insu-01009592
https://hal-insu.archives-ouvertes.fr/insu-01009592
https://hal-insu.archives-ouvertes.fr/insu-01009592/document
https://hal-insu.archives-ouvertes.fr/insu-01009592/file/Mar-Pet-Tassy.pdf
DOI : 10.1016/j.marpetgeo.2014.05.001