Éditeur(s) : HAL CCSD Springer
Résumé : International audience
We present here a synthesis of the evolution of rifted continental margin systems in the Gulf of Aden. These margins are volcanic to the west of the Gulf of Aden, where they are influenced by the Afar hotspot, and non-volcanic east of longitude 46° E. The combined use of magnetics, gravity, seismic reflection, field observations (tectonic, stratigraphic and sedimentological) and oil well data allowed us to obtain better constraints on the timing of continental rifting and seafloor spreading. From the Permo-Triassic to the Oligocene, the Arabian-African plate was subject to distributed extension, probably due, at least from the Cretaceous, to tensile stresses related to the subduction of the Tethysian slab in the north. In Late Eocene-Early Oligocene, 34-33 Ma ago, rifting started to localise along the future area of continental breakup. Initially guided by the inherited basins, continental rifting then occurred synchronously over the entire gulf before becoming localised on the northern and southern borders of the inherited grabens, in the direction of the Afar hotspot. In the areas with non-volcanic margins (in the east), the faults marking the end of rifting trend parallel to the inherited grabens. Only the transfer faults cross-cut the inherited grabens, and some of these faults later developed into transform faults. The most important of these transform faults follow a Precambrian trend. Volcanic margins were formed in the west of the Gulf, up to the Guban graben in the southeast and as far as the southern boundary of the Bahlaf graben in the northeast. Seaward dipping reflectors can be observed on many oil industry seismic profiles. The influence of the hotspot during rifting was concentrated on the western part of the gulf. Therefore, it seems that the western domain was uplifted and eroded at the onset of rifting, while the eastern domain was characterised by more continuous sedimentation. The phase of distributed deformation was followed by a phase of strain localisation during the final rifting stage, just before formation of the Ocean-Continent Transition (OCT), in the most distal graben (DIM graben). About 20 Ma ago, at the time of the continental break-up, the emplacement of the OCT started in the east with exhumation of the subcontinental mantle. Farther west, the system was heated up by the strong influence of the Afar hotspot, which led to breakup with much less extension. In the Gulf of Aden (s.str), up to the Shukra El Sheik fracture zone, oceanic spreading started 17.6 Ma ago. West of this fracture zone, oceanic accretion started 10 Ma ago, and 2 Ma ago in the Gulf of Tadjoura. Post-rift deformation of the eastern margins of the Gulf of Aden can be seen in the distal and proximal domains. Indeed, the substantial post-rift uplift of these margins could be associated with either the continental break-up, or activity of the Afar hotspot and related volcanic/magmatic activity. Uplift of the northern proximal margin was still active (e.g. stepped beach rocks exposed at 60 m of 2 Ma; 30 m of 35,200 years; 10 and 2 m) and active volcanoes can be inferred at depths of between 70 and 200 km beneath the margin (at 5-10 km distance from the coast). On the distal margin, heat flow measurements show a high value that is associated with post-rift volcanic activity and the development of a volcano (with flows and sills) shortly after the formation of the OCT. The Afar hotspot is therefore important for several reasons. It allows the localisation of deformation along the Red Sea/Aden system and the rapid opening of the Gulf after the continental break-up; its influence also seems to persist during the post-rift period.
ISSN: 1866-7411

hal-01053089
https://hal.archives-ouvertes.fr/hal-01053089
DOI : 10.1007/s12517-011-0475-4

Éditeur(s) : Elsevier
Résumé : High P-wave velocities (7.1-7.8 km/s) lower crustal bodies (LCBs) imaged along volcanic margins are commonly interpreted as plume and break-up-related thick mafic underplating. This interpretation is partly challenged in this paper based on new seismic observations and modelling of the outer Voring Basin (Norway). An exceptional strong amplitude reflection, the T Reflection, is particularly well defined below the North Gjallar Ridge (NGR) between 7 and 8 s TWT. The T Reflection is located near the volcanic lava flows emplaced during the NE Atlantic breakup (similar to 55-54 Ma ago) and coincides with the top of the LCB, forming a mid-crustal dome. Based on structural and temporal relationships, we show that the dome clearly influences the structural development of the NGR and predates the continental breakup at least by 10-15 Ma. Using a thermo-kinematical model, we tried also to investigate and quantify the relationships between the extension, LCB and the magmatic production. Modelling suggests that significant Paleocene-Early Eocene magmatism can be produced without any temperature anomaly in the mantle if differential stretching occurs during the break-up initiation. The conclusion of 2D thermo-kinematical parametric analysis is that the magmatic model predicts, either little extension (beta < 2) with no melting or high extension (beta > 5) with significant melting along the outer Voring Basin. We suggest that the continental part of the LCB could not necessarily be breakup-related and so magmatic, as has often been stated previously. It is concluded here that the continental part of the LCB observed beneath the outer Voring Basin may be partly (or fully) attributed to inherited, high-pressure granulite/eclogite lower crustal rocks. The real amount of mafic material emplaced along the outer Voring Basin could be 20-40% less than thought.
Tectonophysics (0040-1951) (Elsevier), 2006 , Vol. 412 , N. 3-4 , P. 255-278

Droits : 2005 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-1042.pdf
DOI:10.1016/j.tecto.2005.10.038
http://archimer.ifremer.fr/doc/00000/1042/

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : National audience
The late Lower to Middle Permian Panjal Traps (NW Himalaya, India-Pakistan) represent the greatest magmatic province erupted on the northern Indian platform during the Neotethys opening. New geochemical and isotopic analyses were performed on basalts from the eastern borders of the traps (SE Zanskar-NW Spiti area) in order to characterize this volcanism, to discuss its compositional variations in comparison to Panjal counterparts and its relationships with the opening of Neotethys. Lavas show features of tholeiitic low-Ti (< 1.6%) continental flood basalts with LREE, Th enrichments and Nb-Ta negative anomalies. Trace element ratios combined with {varepsilon}Ndi values (–3.6 to +0.9) and high Pb isotopic ratios suggest that these tholeiitic basalts were derived from an OIB-like mantle contaminated at various degrees by a continental crust component. Previous geochemical features are broadly similar to those of the coeval Panjal volcanic sequences identified westwards (Ladakh, Kashmir and Pakistan). Present geochemical constraints obtained for the Panjal Traps basalts suggest they originated from rapid effusion of tholeiitic melts during opening of the Neotethys Ocean. Similar magmatism implying an OIB-type reservoir is contemporaneously recognized on and along the adjacent Arabian platform. Both Indian and Arabian Permian volcanics were emplaced during coeval syn-rift to post rift transition. These Lower to Middle Permian south Neotethyan continental flood magmatism are regarded as associated to a passive rifting. In this scheme, OIB-type isotopic signature would be related either to a melting episode of syn-rift up-welling mantle plumes or to a melting of a regional abnormally hot and enriched mantle.
EISSN: 1777-5817

insu-00338862
https://hal-insu.archives-ouvertes.fr/insu-00338862
DOI : 10.2113/gssgfbull.179.4.383

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Ocean island basalts (OIB) from the Comores archipelago (Indian Ocean) display mineralogical and geochemical features different from the other Indian OIB. We present here new geochronological data (40Ar/39Ar), major and trace element compositions and isotopic (Sr, Nd, Pb) ratios of silica-undersaturated alkaline rocks from Mayotte, the oldest island of the Comores. Two trends are defined using major element composition: (1) a highly silica-undersaturated trend which includes basanites, (melilite-bearing) nephelinites, intermediate lavas and phonolites from the southern part of the island and (2) a moderately silica-undersaturated trend which is mainly represented by alkali basalts, basanites, intermediate lavas and phonolites from the northern part of the island. Both trends could be explained, to some extent, by variable degrees of partial melting. Normative larnite-bearing olivine melilitites and nephelinites exhibit, in addition to their high silica-undersaturation, elevated concentrations in CaO (>12wt.%) and P2O5 (up to 1.35wt.%). These exceptional rocks would result from low degree deep partial melting of a CO2-metasomatized source in the presence of carbonate (probably dolomite) and apatite. Igneous rocks from southern and northwestern shield volcanoes are characterized by a radiogenic Pb composition, revealing the existence of a HIMU (high μ=238U/204Pb) component in their source. Its influence decreases from the main building stage (>10.6-~3.0Ma) to the post-shield stage for the benefit of a depleted MORB-mantle (DMM) component, especially in the north central rocks. This feature would reflect increasing melting degrees of the depleted dominant source, bearing small-scale HIMU heterogeneities progressively consumed with time. The HIMU signature might have been introduced in the Comorian lithospheric mantle by thermal erosion or delamination of a continental lithosphere during the Gondwana break-up. The other islands of the Comores archipelago (Moheli, Anjouan and "La Grille" type lavas from Grande Comore) display also a DMM-HIMU mixing trend. Only a few lavas from Grande Comore ("Karthala" type) and one sample from Mayotte show the clear EM1 contribution (87Sr/86Sr>0.7035) of the Comorian plume.
ISSN: 0024-4937

insu-01089376
https://hal-insu.archives-ouvertes.fr/insu-01089376
https://hal-insu.archives-ouvertes.fr/insu-01089376/document
https://hal-insu.archives-ouvertes.fr/insu-01089376/file/Pelleter%20et%20al%201.pdf
DOI : 10.1016/j.lithos.2014.09.012

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
North Tanzanian Divergence is the first stage of continental break-up of East African Rift (<6 Ma) and is one of the most concentrated areas of carbonatite magmatism on Earth, with singular Oldoinyo Lengai and Kerimasi volcanoes. Hanang volcano is the southernmost volcano in the North Tanzanian Divergence and the earliest stage of rift initiation. Hanang volcano erupted silica-undersaturated alkaline lavas with zoned clinopyroxene, nepheline, andradite-schorlomite, titanite, apatite, and pyrrhotite. Lavas are low MgO-nephelinite with low Mg# and high silica content (Mg# = 22.4–35.2, SiO2 = 44.2–46.7 wt%, respectively), high incompatible element concentrations (e.g. REE, Ba, Sr) and display Nb–Ta fractionation (Nb/Ta = 36–61). Major elements of whole rock are consistent with magmatic differentiation by fractional crystallization from a parental melt with melilititic composition. Although fractional crystallization occurred at 9–12 km and can be considered as an important process leading to nephelinite magma, the complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites recorded magmatic differentiation involving open system with carbonate–silicate immiscibility and primary melilititic melt replenishment. The low water content of clinopyroxene (3–25 ppm wt. H2O) indicates that at least 0.3 wt% H2O was present at depth during carbonate-rich nephelinite crystallization at 340–640 MPa and 1050–1100 °C. Mg-poor nephelinites from Hanang represent an early stage of the evolution path towards carbonatitic magmatism as observed in Oldoinyo Lengai. Paragenesis and geochemistry of Hanang nephelinites require the presence of CO2-rich melilititic liquid in the southern part of North Tanzanian Divergence and carbonate-rich melt percolations after deep partial melting of CO2-rich oxidized mantle source.
ISSN: 0010-7999

hal-01467390
https://hal.archives-ouvertes.fr/hal-01467390
DOI : 10.1007/s00410-016-1273-5

Éditeur(s) : HAL CCSD
Résumé : The mantle deformation processes that control the thinning and break-up of continental lithosphere remain poorly understood. Our knowledge is restricted to either lithospheric scale thermo-mechanical models --that use experimentally derived flow laws--, geophysical imaging and/or rare xenoliths from active continental rifts, such as the East African Rift System. The originality of this work relies on the study of the two largest outcrops of diamond facies subcontinental lithospheric mantle in the world: the Beni Bousera and Ronda peridotite massifs in N Morocco and S Spain, respectively. The structures and petrologic and metamorphic zoning preserved in these massifs --implying a polybaric and polythermal evolution-- provides a unique opportunity to investigate the thermo-mechanical evolution of thick subcontinental lithospheric mantle in extensional settings. In this thesis we studied the deformation mechanisms in both peridotites and pyroxenites to constrain the modes of exhumation of subcontinental lithospheric mantle from garnet-, to spinel-, and finally, to plagioclase lherzolite facies conditions. We combined field mapping of tectonometamorphic domains and structural mapping of ductile structures, microstructural analysis, crystal preferred orientations (CPO) measurements and conventional thermobarometric calculations and thermodynamic modeling (Perple_X) to unravel the pressure and temperature conditions of deformation. We showed that exhumation from garnet- to spinel lherzolite facies conditions was accommodated by fast shearing --in thermal disequilibrium--along a lithospheric scale transtensional shear zone. In this context, the petrological zoning and the large temperature gradient (ca. 100ºC/km) preserved in the Beni Bousera massif represent the mechanical juxtaposition of progressively deeper and hotter lithospheric levels at depths of ca. 60 km in the latest Oligocene (ca. 25 Ma). Final exhumation from spinel- to plagioclase facies lherzolite and emplacement into the crust is best recorded in the Ronda massif where it occurred by inversion and lithospheric scale folding of the highly attenuated continental lithosphere in a back-arc region, probably in relation with southward slab rollback and subsequent collision with the palaeo-Maghrebien passive margin in the early Miocene (21-23 Ma).
Les processus de déformation contrôlant l'amincissement de la lithosphère continentale sont encore mal contraints. Nos connaissances sont principalement basées sur la modélisation thermomécanique d'extension à l'échelle de la lithosphère--utilisant des lois rhéologiques derivées expérimentalement, l'imagerie géophysique et l'analyse de xénolithes provenant de rift continentaux actifs à ce jour, tels que le Rift Est-Africain. L'originalité de ce travail reside dans l'étude des deux plus grands massifs de péridotites sous-continentales ayant enregistrées des conditions primaires du facies à diamant: les massifs de Beni Bousera au nord du Maroc et de Ronda au sud de l'Espagne, respectivement. Les structures et la zonation petrologique et métamorphique --impliquant une évolution polybarique et polythermique-- préservéees dans ces massifs offrent une opportunité unique pour étudier l'évolution thermo-mécanique du manteau sous-continental dans un contexte extensif. Dans ce travail, nous avons étudié les mécanismes de déformation des péridotites et des pyroxénites afin de contraindre les modes d'exhumation du manteau lithosphérique sous-continental, depuis des conditions du facies des lherzolites à grenat, jusqu'au facies à spinelle et enfin à plagioclase. Nous avons combiné la cartographie des faciès tectono-métamorphiques et des structures ductiles de déformation, l'analyse des microstructures, la mesure d'orientations préférentielles de réseau (OPR), et la géothermobarométrie conventionelle couplée à la modélisation thermodynamique (PerpleX) afin de contraindre les conditions de pression et température de la déformation. Nous avons montré que l'exhumation précoce du facies à grenat au facies à spinelle était accomodée par une faille transtensive affectant le manteau lithosphérique. Dans ce contexte, la zonation tectono-métamorphique et le gradient thermique important (ca. 100ºC/km) préservés à Beni Bousera résultent de la juxtaposition mécanique de domaines lithosphériques initialement équilibrés à différentes pressions et températures, fossilisée à une profondeur de ca. 60 km durant l'Oligocène supérieur (ca. 25 Ma). L'exhumation finale du facies de lherzolite à spinelle au facies à plagioclase et l'emplacement final dans la croûte, mieux enregistrés dans Ronda, se sont produits par inversion et plissement de la section lithosphérique fortement amincie dans un contexte arrière-arc, probablement lors du retrait vers le sud de la lithosphère subduite et la collision de l'arc avec les paléo-marges maghrébines au Miocène inférieur (21-23 Ma).
https://tel.archives-ouvertes.fr/tel-00767700

tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700/document
https://tel.archives-ouvertes.fr/tel-00767700/file/THESE_Frets.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The Cenozoic weathering of peninsular India has been advocated as a major driver of globalcooling, however, its timing remains virtually unconstrained such that proposed links betweentropical weathering of the Deccan Traps, regional monsoonal intensity and global climate remainsspeculative. To solve this conundrum we present here a revised weathering chronologybased on the identification of lateritic paleosurfaces and their dating using 40Ar/39Ar on supergeneK-rich manganese oxides. We focus on the Indian western passive margin where theWestern Ghats Escarpment (WGE) – a ~1000 m high topographic barrier resulting from thecontinental break up of Greater India – exposes exceptionally preserved weathering profilesfrom the western coastal lowlands to the eastern highland plateaus above the WGE. Four mainlateritic paleosurfaces have been identified: Three in the highland; a high landsurface (Al-Femostly bauxite) at elevation 1200-1000 m asl, an intermediate landsurface covered by a Feduricrustat 1000-900 m asl and a lower pediment landsurface at 850-600 m asl; and one inthe coastal lowland underneath a pediment landsurface at 150-50 m asl. The 40Ar/39Ar agesdocument three major weathering periods over the Cenozoic. The oldest weathering period(W1) is recorded between 53 Ma to 45 Ma both in the highland and the lowland. This correlatesto the Global Eocene climatic Optimum, and allows defining a bauxitic paleolandsurface acrossthe escarpment. Intense bauxitic weathering between ~ 45 and 47 Ma in the lowland indicatethat the WGE was stabilized before ~ 47 Ma on its margin and also implies low denudation rateat the foot of the WGE (<5 m Ma-1) since that time. The second weathering period between37 Ma to 19 Ma (W2) occurred in two distinctive stages (W2a and W2b). From 37 to 26 (W2a),weathering is only recorded in the highland and affect intermediate surfaces. The intensityof chemical weathering decreased sensibly between 32 and 29 Ma – potentially linked to theEarly Oligocene cooling – and resulted in the formation of the lower pediment surface. From~26 Ma to 19 Ma (W2b), only the western coastal lowland weathered while the highland surfacesare mostly dissected. This change and the highland/lowland weathering mitigation after~26 Ma documents a change in climatic patterns over peninsular India that signs the onset ofmodern-like monsoon regime. These results are being interpolated to the Deccan Traps basaltsto quantify their weathering and ultimately estimate of the contribution to CO2 fluxes of thesethree weathering periods and their potential link to Asian Monsoons and global cooling.
Source to Sink: a long term perspective of sediment budgets and sources characterization, Abstracts
Rennes, France

insu-01406455
https://hal-insu.archives-ouvertes.fr/insu-01406455

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
The frequently observed parallelism between rifts and the pre­ existing orogenic fabric of continents suggests that the inherited tectonic fabric of the lithosphere influences the rupture of continents. We propose that the existence of a pervasive fabric in the lithospheric mantle induces an anisotropie strength in the lithosphere, that guides the propagation of continental rifts. Subcrustal mantle mechanical anisotropy is supported by (i) the anisotropie strength of olivine, (ii) an ubiquitous tectonic fabric in exposed mantle rocks, and (iii) measurements of seismic and electrical anisotropy. During major episodes of continent Rifting parallel to orogenic belts Ocean-opening through rifting and continent break-up is frequently related to the occurrence ofhotspots. There is, howevcr, a discrepancy between hot­ spots acting as pin point sources of heat and the linear extent of rifts over thou­ sands ofkilometres. Moreover rifts tend to parallel pre-existing orogenic fab­
ISSN: 0954-4879

hal-01389721
http://hal.univ-reunion.fr/hal-01389721
http://hal.univ-reunion.fr/hal-01389721/document
http://hal.univ-reunion.fr/hal-01389721/file/Vauchez_TerraNova1997_hal.pdf
DOI : 10.1111/j.1365-3121.1997.tb00003.x

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Reactivation of structures inherited from previous collisional or rifting events, especially lithospheric-scale faults, is a major feature of plate tectonics. Its expression ranges from continental break-up along ancient collisional belts(1,2) to linear arrays of intraplate magmatism and seismicity(3,4). Here we use multiscale numerical models to show that this reactivation can result from an anisotropic mechanical behaviour of the lithospheric mantle due to an inherited preferred orientation of olivine crystals. We explicitly consider an evolving anisotropic viscosity controlled by the orientation of olivine crystals in the mantle. We find that strain is localized in domains where shear stresses on the inherited mantle fabric are high, and that this leads to shearing parallel to the inherited fabric. During rifting, structural reactivation induced by anisotropy results in oblique extension, followed by either normal extension or failure. Our results suggest that anisotropic viscosity in the lithospheric mantle controls the location and orientation of intraplate deformation zones that may evolve into new plate boundaries, and causes long-lived lithospheric-scale wrench faults, contributing to the toroidal component of plate motions on Earth.
ISSN: 1752-0894

hal-00413033
https://hal.archives-ouvertes.fr/hal-00413033
DOI : 10.1038/ngeo528

Éditeur(s) : HAL CCSD Elsevier
Résumé : LA-ICP-MS and SIMS U–Pb analyses have been performed on detrital zircon grains from four heavy mineral rich metasediments collected at different levels of the Nathorst Land Group (Eleonore Bay Supergroup, Greenland). Zircons from high-grade samples collected in the sillimanite and migmatite zones exhibit modifications to their structure, which are lacking in grains from a low-grade sample (0.3 GPa and 350–400 °C). In the sillimanite zone (0.5 GPa, 650 °C), thin discontinuous rims (<20 μm) plating detrital zircon grains document a metamorphic overgrowth during the Caledonian event dated at 428 ± 25 Ma (2σ). In the migmatite zone (0.4 GPa, 700 °C), zircons underwent severe recrystallisation processes but no new zircon growth. Ilmenite, which constitutes over 50% of the heavy mineral layers, underwent recrystallisation in both high-grade samples and is likely to represent the main source of Zr available for growth of zircon rims in the sillimanite zone. However, in the migmatite zone sample, the metamorphic conditions allowed titanite overgrowth around ilmenite, which acted as a sink for Zr and inhibited new zircon growth. 207Pb/206Pb ages for 152 detrital zircons broadly range between 2800 and 990 Ma. The detrital zircon age signature is characterized by the large predominance of late Paleoproterozoic (1.85–1.60 Ga) grains in all analysed samples and by lesser amounts of Archean (2.7–2.8 Ga) and Mesoproterozoic (1.2–1.0 Ga) zircons. The overall age range indicates that detritus can be sourced from the Labradorian and Makkovikian provinces of northeastern Laurentia. The youngest grain analysed (987 ± 18 Ma) indicates that deposition took place during the Neoproterozoic, in a post-Grenvillian sedimentary environment and was likely coeval with the Mid-Neoproterozoic episode of aborted rifting that affected the eastern margin of Laurentia. The lack of detritus originating from Amazonia or Baltica, placed adjacent to Laurentia during the early stages of Rodinia fragmentation, suggests that these two continental landmasses did not constitute a topographic high during the Neoproterozoic or that the Mid-Neoproterozoic rifting opened toward an open ocean to the north of a combined Laurentia/Baltica, thus resulting in a general south to north direction of transport of the sediments.
ISSN: 0301-9268

hal-00407204
https://hal.archives-ouvertes.fr/hal-00407204
DOI : 10.1016/j.precamres.2007.01.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : Integrated field, LA-MC-ICP-MS geochronology and geochemical data from the Novo Oriente Group have been investigated in order to determine their provenance and possible tectonic setting. This group in the southwestern portion of the Ceara Central Domain, is a well-preserved metavolcanosedimentary sequence, in part exhalative, composed of two distinct formations. The proximal coastal Bonsucesso Formation comprises mainly quartzite and minor basic metavolcanic rocks and is in gradational contact with the distal Caranbas Formation which constitutes a metapelitic-volcanic-carbonate sequence, including metabasic rocks with pillow structure and sheared serpentinized ultrabasic rocks. The youngest detrital zircon found in the quartzite of the Bonsucesso Formation yielded an age of ca. 2.1 Ga and well-defined peaks around 2.2.2.3-2.4 and 2.5 Ga. In addition, zircons from a related metabasalt yielded an upper intercept age of 2083 +/- 28 Ma. We interpret the zircons found in this metabasalt as inherited from the host quartzite. This fact is supported by depleted-mantle Nd model ages (T-DM age) from correlated metabasic and metaultrabasic rocks from other places in the Novo Oriente sequence, which have yielded ages between 1.36 and 1.69 Ga, that is younger than the zircon age obtained in the metabasalt extruded over the Bonsucesso quartzite. Geochemical data of the metasedimentary rocks from the Caraubas Formation indicates a provenance composed of a mixture of felsic and intermediate sources typical of old stable cratons and older continental roots of active tectonic settings. The rocks of the Crania (Medio Coreau Domain) and Bacaja Complexes (southeastern Amazonian Craton) exposed to the west of the Novo Oriente Group, and largely covered by the Phanerozoic Parnaiba intracratonic basin, are the most likely source rocks. Since the precise age of the Novo Oriente Group is not yet well constrained, two distinct settings may be proposed: (1) it may represent a more evolved basin developed from extensional processes during the Mesoproterozoic (ca. 1.5-1.3 Ga); and (2) it could constitute part of the passive margin systems developed during the break-up of the Rodinia crown copyright supercontinent (ca. 0.95-0.8 Ga), associated with a pre-Brasiliano/Pan-African ocean (e.g. Pharusian Ocean). Crown.
ISSN: 1342-937X

hal-00512825
https://hal.archives-ouvertes.fr/hal-00512825
DOI : 10.1016/j.gr.2010.02.001