Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Despite convergent margins being unstable systems, most reports of huge submarine slope failure have come from oceanic volcanoes and passive margins. Swath bathymetry and seismic profiles of the northern Hikurangi subduction system, New Zealand, show a tapering 65-30 km wide by 65 km deep margin indentation, with a giant, 3150+_630 km 3, blocky, debris avalanche deposit projecting 40 km out across horizontal trench fill, and a debris flow deposit projecting over 100 km. Slide blocks are well-bedded, up to 18 km across and 1.2 km high, the largest being at the avalanche deposit's leading edge. Samples dredged from them are mainly Miocene shelf calc-mudstones similar to those outcropping around the indentation. Cores from cover beds suggest that failure occurred-170 +_40 ka, possibly synchronously with a major extension collapse in the upper indentation. However, the northern part of the indentation is much older. The steep, straight northern wall is close to the direction of plate convergence and probably formed around 2.0-0.16 Ma as a large seamount subducted, leaving in its wake a deep groove obliquely across the margin and an unstable triangle of fractured rock in the 60 ø angle between groove and oversteepened margin front. The triangle collapsed as a blocky avalanche, leaving a scalloped southern wall and probably causing a large tsunami. Tentative calculations of compacted volumes suggest that the indentation is over 600 km 3 larger than the avalanche, supporting a two-stage origin that includes subduction erosion. Since failure, convergence has carried the deposits-9 km back toward the margin, causing internal compression. The eventual subduction/accretion of the Ruatoria avalanche explains the scarcity of such features on active margins and perhaps the nature of olistostromes in fold belts.
ISSN: 2169-9275

hal-01261406
https://hal.archives-ouvertes.fr/hal-01261406
https://hal.archives-ouvertes.fr/hal-01261406/document
https://hal.archives-ouvertes.fr/hal-01261406/file/CollotJGR2001.pdf
DOI : 10.1029/2001JB900004

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
While the kinematics of Anatolia plate and the North Anatolian Fault System (NAFS) has been studied extensively, the slip rate and locking depth along the NAFS are usually assumed constant in the analyses due to the lack of sufficient data. This is also partly due to the reasonably good fit of Euler small circle and partly due to the lack of spatial resolution of observations to determine slip rates independently from locking depths. On the other hand, recent geodetic studies show a contrast for locking depth between Marmara and other parts of the NAFS, implying a non-uniform locking depth across the NAFS. In this study, we analyse new GPS data and homogenously combine available data sets covering the eastern part of the NAFS to form the most complete data set. In particular, we incorporate the first results of Turkish Real-Time Kinematic GPS Network (CORS-TR) into our data set. A detailed analysis of three profiles within the NAFS reveals an increase of locking depth in the middle profile to 19.1 ± 3.4 km from 11.9 ± 3.5 km in the easternmost profile while the slip rate is nearly constant (20–22 mm yr−1), which implies a variation of strain rate of ∼100 nanostrain yr−1. Assuming a constant locking depth throughout whole NAFS gives an average locking depth of 14.3 ± 1.7 km. Our best estimates of slip rates in block modelling which takes the variation of locking depths into account are in the range between 22.5 and 22.8 mm yr−1 over eastern part of the NAFS.
ISSN: 0956-540X

hal-01218392
https://hal.archives-ouvertes.fr/hal-01218392
DOI : 10.1093/gji/ggv274

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The northern Canadian Cordillera (NCC) is an active orogenic belt in northwestern Canada characterized by deformed autochtonous and allochtonous structures that were emplaced in successive episodes of convergence since the Late Cretaceous. Seismicity and crustal deformation are concentrated along corridors located far (>200 to ~800 km) from the convergent plate margin. Proposed geodynamic models require information on crust and mantle structure and strain history, which are poorly constrained. We calculate receiver functions using 66 broadband seismic stations within and around the NCC and process them to estimate Moho depth and P-to-S velocity ratio (Vp/Vs) of the Cordilleran crust. We also perform a harmonic decomposition to determine the anisotropy of the subsurface layers. From these results, we construct simple seismic velocity models at selected stations and simulate receiver function data to constrain crust and uppermost mantle structure and anisotropy. Our results indicate a relatively flat and sharp Moho at 32 ± 2 km depth and crustal Vp/Vs of 1.75 ± 0.05. Seismic anisotropy is pervasive in the upper crust and within a thin (~10–15 km thick) sub-Moho layer. The modeled plunging slow axis of hexagonal symmetry of the upper crustal anisotropic layer may reflect the presence of fractures or mica-rich mylonites. The subhorizontal fast axis of hexagonal anisotropy within the sub-Moho layer is generally consistent with the SE-NW orientation of large-scale tectonic structures. These results allow us to revise the geodynamic models proposed to explain active deformation within the NCC.
ISSN: 2169-9313

Droits : info:eu-repo/semantics/OpenAccess
hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550/document
https://hal.archives-ouvertes.fr/hal-01685550/file/Tarayoun_et_al-2017-Journalsur Geophysical_Research__Solid_Earth.pdf
DOI : 10.1002/2017JB014284

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
We explore the tectono-magmatic processes in the western West Philippine Basin, Philippine Sea Plate, using bathymetric data acquired in 2003 and 2004. The northwestern part of the basin formed through a series of northwestward propagating rifts. We identify at least five sequences of propagating rifts, probably triggered by mantle flow away from the mantle thermal anomaly that is responsible for the origin of the Benham and Urdenata plateaus. Gravitational forces caused by along-axis topographic gradient and a ∼30° ridge reorientation appear to also be driving the rift propagations. The along-axis mantle flow appears to be reduced and deflected along the Luzon-Okinawa fracture zone, because the spreading system remained stable west of this major fault zone. North-east of the Benham plateau, a left-lateral fracture zone has turned into a NE–SW-trending spreading axis. As a result, a microplate developed at the triple junction.
ISSN: 0954-4879

insu-00304360
https://hal-insu.archives-ouvertes.fr/insu-00304360
DOI : 10.1111/j.1365-3121.2008.00824.x

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We have analyzed shear wave splitting recorded by portable and permanent broadband and long-period stations located in the eastern United States. Teleseismic shear waves (SKS, SKKS, and PKS) were used to retrieve the splitting parameters: the orientation of the fast wave polarization plane ϕ and the delay time δt. In total, 120 seismic events were processed, allowing for more than 600 splitting measurements. Within the Appalachians, stations located in the western (external) part are characterized by δt≈1s and ϕ trending N50°– 70°E in the south and central regions and N30°–40°E in the north, closely following the trend of the orogenic belt in these areas. The transition region between north and central is characterized by δt≈1–1.3 s and by E-W trending ϕ that are at a high angle to the regional geologic trend. Measurements at two stations located in the eastern (internal) part of the belt indicate very weak anisotropy. The large-scale pattern of anisotropy is not consistent with that predicted for simple asthenospheric flow beneath the plate. Splitting along the southern and eastern margins of the continent is consistent with that expected for Grenvillian deformation, an alternative model of asthenospheric flow around the cratonic keel cannot be ruled out. Within the cratonic core, the correlation between δt and lithospheric thickness suggests a lithospheric anisotropy. Smaller-length-scale variations also argue for a significant contribution of lithospheric structures. The fabric responsible for shear wave splitting may have formed during tectonic episodes that affected the eastern United States, i.e., the Grenville and Appalachian orogenies and the subsequent rifting of the North Atlantic Ocean. Our observations in the western Appalachians suggest that the anisotropy may be preserved since the Grenvillian orogeny. The absence of detectable splitting in the two stations in the eastern Appalachians is attributed to the igneous intrusions related to the Atlantic rifting. The measurements in the transition between the northern and central southern Appalachians, constitute an intriguing anomaly, whose E-W ϕ have little obvious relation to the regional surface geology. We suggest two possible causes: (1) the local dominance of asthenospheric flow, motivated by the proximity of a pervasive low-velocity anomaly and (2) lithospheric deformation in a transcontinental strike-slip fault zone active during the Appalachian collision.
ISSN: 2169-9313

hal-01388859
http://hal.univ-reunion.fr/hal-01388859
http://hal.univ-reunion.fr/hal-01388859/document
http://hal.univ-reunion.fr/hal-01388859/file/Barruol_JGR_1997.pdf
DOI : 10.1029/96JB03800

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Taiwan area, where the Philippine Sea Plate collides with Eurasia, is one of the most seismically active areas in the world and has been consequently struck repeatedly by destructive earthquakes. To better constrain the occurrence of large earthquakes, we have conducted two cruises in 2012 and 2013 from which five piston, gravity and box-cores were retrieved from selected sites in targeted areas that contain continuous and accurate turbidite deposition offshore eastern Taiwan. Forty-seven turbidite layers deposited between 675 BC and 2012 AD have been described in the cores with facies varying from silty clay to coarse sand. We modeled each turbidite layer using the sedimentation rate deduced from radiocarbon age measurements performed on planktonic foraminifers. Precise dating based on 210Pb–137Cs chronology provided ages for the XXth century turbidites. Coring sites' locations, biotic association within turbidites beds and seismic calibration over the instrumental period, suggest that earthquakes are the most likely triggering mechanisms of turbidity currents over the last 2700 years. Calibration of correlations between turbidites and instrumental earthquakes allowed us to determine the minimum magnitude of recorded events (Mw = 6.8) and the maximum distance between the epicenter and the slope failure. Turbidites' synchroneity between cores has been tested but results showed that this criterion cannot be used in our study area because of the high level of seismicity, i.e., a M > 6.8 earthquake recurrence interval much smaller than the uncertainty on radiocarbon ages. The excellent accuracy of dating allows correlating all the turbidites deposited since 1920 with instrumental earthquakes. For each core, we established a return time ranging between 112 and 147 years for the period pre-1900 and ~ 27 and 34 years for the period post-1900. The discrepancy between pre-1900 and post-1900 recurrence either suggests, that slope stability varies, with higher slope instability after 1900 possibly due to increased sediment delivery by rivers.
ISSN: 0040-1951

hal-01467627
https://hal.archives-ouvertes.fr/hal-01467627
DOI : 10.1016/j.tecto.2016.04.030

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The ODP/IODP multileg campaign at ODP Site 1256 (Cocos plate, eastern equatorial Pacific) provides the first continuous in situ sampling of fast spreading ocean crust from the extrusive lavas, through the sheeted dikes and down into the uppermost gabbros. This paper focuses on a detailed petrographic and microanalytical investigation of the gabbro section drilled during IODP Expedition 312. The marked patchy and spotty features that can be observed in many Hole 1256D gabbros is mostly due to a close association of two different lithological domains in variable amounts: (1) subophitic domains and (2) a granular matrix. Major and trace element mineral compositions, geothermometry, and petrological modeling suggest that subophitic and granular domains follow one single magma evolution trend formed by in situ fractionation. The subophitic domains correspond to the relative primitive, high-temperature end-member, compositionally similar to the basalts and dikes from the extrusive unit upsection, while the granular domains fit with a magma evolution by crystal fractionation to lower temperatures, up to a degree of crystallization of similar to 80%. Our results support the following scenario for the fossilization of the axial melt lens at ODP Site 1256: relatively primitive MORB melts under near-liquidus conditions fill the melt lens and feed the upper, extrusive crust. Near the melt lens-sheeted dike boundary at lower temperatures, crystallization starts with first plagioclase before clinopyroxene in a mushy zone forming the subophitic domains. At decreasing temperatures, the subophitic domains continue to crystallize, finally forming a well-connected framework. Evolved, residual melt is finally trapped within the subophitic network, crystallizing at near-solidus conditions to the granular matrix. Another important textural feature in Hole 1256D gabbros is the presence of microgranular domains which are interpreted as relics of stoped/assimilated sheeted dikes (transformed to "granoblastic dikes" by contact metamorphism). All these different domains can be observed in close association, often at the thin section scale, demonstrating the extremely complex petrological record of combined crystallization/assimilation processes ongoing in the axial melt lens. Very similar gabbros with a marked spotty/patchy appearance, and bearing the same close association of lithological domains as observed at Site 1256, are known in the so-called "varitextured gabbro" unit from the Oman Ophiolite located at the same structural level, between cumulate gabbros and granoblastic dikes. The close petrological similarity of the gabbro/dike transition between both IODP Hole 1256D and the Oman ophiolite suggests that in situ fractionation and dike assimilation/contamination are major magmatic processes controlling the dynamics and fossilization of the axial melt lens at fast spreading oceanic ridges.
ISSN: 1525-2027

hal-00644798
https://hal.archives-ouvertes.fr/hal-00644798
DOI : 10.1029/2011GC003655