Éditeur(s) : Elsevier
Résumé : A previously unknown pattern of multiple bottom-simulating reflections (BSRs) occurs on high-resolution reflection seismic data in the Danube deep-sea fan, associated with acoustic features indicating free gas. Our study provides evidence that this pattern is developed in relation with the architecture of distinct channel-levee systems of the Danube fan. Channel-levee systems hosting multiple BSRs act as relatively sealed gas-bearing systems whose top is situated above the base of the gas hydrate stability zone (BGHSZ). Inside these systems, free gas accumulates below the BGHSZ under a combined lithological, structural and stratigraphical control. The uppermost BSR marks the current equilibrium BGHSZ, for a gas composition of more than 99% methane. Model-derived depths of the BGHSZ for different gas compositions and pressure-temperature conditions show that multiple BSRs would correspond to the BGHSZ either for (1) layers of gas hydrates with high contents of heavy hydrocarbons or hydrogen sulphide, or (2) stable climatic episodes with temperatures between glacial values and the present-day conditions. As the gas hydrate compositions required by hypothesis (I) are in sharp contradiction with the general background of the gas composition in the study area, we suggest that multiple BSRs are most probably relics of former positions of the BGHSZ, corresponding to successive steps of climate warming. In this case, they can provide sea-bottom paleotemperature values for these episodes, and hence they are potential new proxies for deciphering past climate conditions.
Marine Geology (0025-3227) (Elsevier), 2006-03 , Vol. 227 , N. 3-4 , P. 163-176

Droits : 2006 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-1210.pdf
DOI:10.1016/j.margeo.2005.12.006
http://archimer.ifremer.fr/doc/00000/1210/

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
To test if hydrogen incorporation by ionic diffusion can occur between a volatile-rich kimberlitic liquid and forsterite, results of high-pressure and high-temperature experiments using a piston-cylinder apparatus at 1200–1300 °C and 1 GPa for durations of 1 min, 5 h, and 23 h, are reported here. Kimberlitic liquid in the system CaO-MgO-Al2O3-SiO2-CO2-H2O and synthetic forsterite single crystals were chosen as a first simplification of the complex natural kimberlite composition. Unpolarized Fourier transform infrared spectroscopy was used to quantify the concentrations of OH in the crystallographically oriented forsterite. Scanning electron microscopy, electron backscattered diffraction, electron microprobe analyses, and transmission electron microscopy were performed to identify the run products. After 5 and 23 h, a forsterite overgrowth crystallized with the same orientation as the initial forsterite single crystal. The kimberlitic liquid has crystallized as micrometer-scale euhedral forsterite neocrystals with random crystallographic orientations, as well as a nanoscale aluminous phase and a calcic phase. Despite theoretical water-saturation of the system and long duration, none of the initial forsterite single crystals display signs of hydration such as hydrogen diffusion profile from the border toward the center of the crystal. Most likely, the presence of CO2 in the system has lowered the H2O fugacity to such an extent that there is no significant hydration of the starting forsterite single crystal or its overgrowth. Also, the presence of CO2 enhances rapid forsterite crystal growth. Forsterite growth rate is around 2 × 108 μm3/h at 1250 °C. These experimental results suggest a deep mantle origin of the high OH content found in natural mantle-derived xenoliths transported in kimberlites, as reported from the Kaapvaal craton. In agreement with previous studies, it also points out to the fact that significant hydration must take place in a CO2-poor environment.
ISSN: 0003-004X

hal-01217157
https://hal.archives-ouvertes.fr/hal-01217157
DOI : 10.2138/am-2015-5200

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Cyanobacteria are ubiquitous microorganisms considered as important contributors to the formation of Earth's atmosphere and nitrogen fixation. However, they are also frequently associated with toxic blooms. Indeed, the wide range of hepatotoxins, neurotoxins and dermatotoxins synthesized by these bacteria is a growing environmental and public health concern. This paper provides a state of the art on the occurrence and management of harmful cyanobacterial blooms in surface and drinking water, including economic impacts and research needs. Cyanobacterial blooms usually occur according to a combination of environmental factors e.g., nutrient concentration, water temperature, light intensity, salinity, water movement, stagnation and residence time, as well as several other variables. These environmental variables, in turn, have promoted the evolution and biosynthesis of strain-specific, gene-controlled metabolites (cyanotoxins) that are often harmful to aquatic and terrestrial life, including humans. Cyanotoxins are primarily produced intracellularly during the exponential growth phase. Release of toxins into water can occur during cell death or senescence but can also be due to evolutionary-derived or environmentally-mediated circumstances such as allelopathy or relatively sudden nutrient limitation. Consequently, when cyanobacterial blooms occur in drinking water resources, treatment has to remove both cyanobacteria (avoiding cell lysis and subsequent toxin release) and aqueous cyanotoxins previously released. Cells are usually removed with limited lysis by physical processes such as clarification or membrane filtration. However, aqueous toxins are usually removed by both physical retention, through adsorption on activated carbon or reverse osmosis, and chemical oxidation, through ozonation or chlorination. While the efficient oxidation of the more common cyanotoxins (microcystin, cylindrospermopsin, anatoxin and saxitoxin) has been extensively reported, the chemical and toxicological characterization of their by-products requires further investigation. In addition, future research should also investigate the removal of poorly considered cyanotoxins (β-methylamino-alanine, lyngbyatoxin or aplysiatoxin) as well as the economic impact of blooms.
Environment International

hal-00875835
https://hal-univ-rennes1.archives-ouvertes.fr/hal-00875835
https://hal-univ-rennes1.archives-ouvertes.fr/hal-00875835/document
DOI : 10.1016/j.envint.2013.06.013
PUBMED : 23892224

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The minerals constituting the Earth's upper mantle are nominally anhydrous silicates (NAMs). However they do contain hydrogen as a trace element, decorating point defects in their crystalline structure. Experimental petrology and mineralogy have quantified the maximum concentration under several compositional and thermodynamic conditions, but systematic studies on the hydrogen concentration in minerals from mantle-derived rocks have only recently been carried out. Here, we have compiled the distribution of hydrogen in upper mantle peridotite xenoliths, from which several conclusions can be drawn. NAMs from peridotite xenoliths contain a few ppm wt. H2O in their structure. From the current database, the hydrogen concentrations in olivine regularly increase with increasing depth. The amount of hydrogen in NAMs from peridotite xenoliths from subduction contexts is not higher than in other geological context for similar temperature and pressure conditions. The highest hydrogen concentrations is found in peridotitic olivines from cratonic mantle, and are likely due to the depth of origin. The increasing hydrogen concentration in olivine with increasing depth is likely controlled by the increase of H partitioning into olivine at the expense of orthopyroxene as imposed by a decrease in Al content in opx with depth. However, the sparse data could also indicate that the bulk hydrogen concentration slightly increases with depth > 150 km. In this case, it would suggest, locally (Udachnaya for example), a possible increase in water fugacity due to fluid saturation. Even if the most abundant mineral in mantle rocks is olivine, the bulk hydrogen concentration in peridotites is controlled by the amount of hydrogen stored in pyroxenes. However, hydrogen concentration in olivine remains crucial for consequences on physical properties such as rheology and electrical conductivity. Kinetics of hydrogen transport is reviewed and hydrous melt/fluid percolation appears necessary to homogenize the hydrogen distribution at km-scale. Sampling of natural rock specimens is currently biased (e.g., in favor of optically attractive samples) and needs improvement, which will be achieved by increasing sample diversity (all type of grain sizes, lithologies, geological settings) and size of rock samples, as well as advances in analytical techniques. Acquisition of high quality data will be achieved by studying the co-existing minerals in mantle specimens, exploring each sample by linear and mapping measurements, and using appropriate FTIR calibrations for polarized and unpolarized radiation.
ISSN: 0024-4937

hal-01306676
https://hal.archives-ouvertes.fr/hal-01306676
DOI : 10.1016/j.lithos.2015.11.012

Éditeur(s) : HAL CCSD
Résumé : International audience
Metamorphic soles correspond to m to 500 m thick highly strained metamorphic rock units found beneath myloniticbanded peridotites at the base of large-scale ophiolites, as exemplified in Oman. Metamorphic soles aremainly composed of metabasalts deriving from the downgoing oceanic lithosphere and metamorphosed up togranulite-facies conditions by heat transfer from the mantle wedge. Pressure–temperature peak conditions areusually estimated at 1.00.2 GPa and 800100ºC. The absence of HP–LT metamorphism overprint implies thatmetamorphic soles have been formed and exhumed during subduction infancy. In this view, metamorphic soleswere strongly deformed during their accretion to the mantle wedge (corresponding, now, to the base of the ophiolite).Therefore, metamorphic soles and banded peridotites are direct witnesses of the dynamics of early subductionzones, in terms of thermal structure, fluid migration and rheology evolution across the nascent slab interface.Based on fieldwork and EBSD analyses, we present a detailed (micro–) structural study performed on samplescoming from the Sumeini window, the better-preserved cross-section of the metamorphic sole of Oman. Largedifferences are found in the deformation (CPO, grain size, aspect ratio) of clinopyroxene, amphibole and plagioclase,related to mineralogical changes linked with the distance to the peridotite contact (e.g., hardening due to theappearance of garnet and clinopyroxene).To model the incipient slab interface in laboratory, we carried out 5 hydrostatic annealing and simple-shear experimentson Griggs solid-medium apparatus. Deformation experiments were conducted at axial strain rates of 10-6s-1. Fine-grained amphibolite was synthetized by adding 1 wt.% water to a (Mid-Ocean Ridge) basalt powder asa proxy for the metamorphic sole (amphibole + plagioclase + clinopyroxene garnet assemblage). To synthetizegarnet, 2 experiments were carried out in hydrostatic conditions and with deformation at 800C with confiningpressure of 2 GPa. Another simple-shear experiment has been carried out at 800C and 1 GPa with fined-grainednatural garnet. With the aim of mimicking the early slab interface (between the metamorphic sole and bandedperidotites at the base of the ophiolite), 2 simple-shear deformation experiments with 2 layers have been carriedout at 800C and confining pressure of 1 GPa. The bottom layer was made of hydrated basalt powder and the toplayer was made of olivine.Fined-grained garnet-free amphibolite is significantly weaker than dunite but the appearance of harder mineralsin the amphibolite (garnet and clinopyroxene) has major implications on its rheological evolution. These resultsallow liking field observations of strain localization at the interface to the metamorphic sole formation
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01309394
https://hal-insu.archives-ouvertes.fr/insu-01309394

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Hydrothermal circulation at ultramafic-hosted sites supports a large variety of high-and low-temperature hydrothermal vents and associated ecosystems. The discovery of abundant fossil vesicomyid and thyasirid shell accumulations at the ridge crest, approximately 2.5 km east of the active Rainbow vent field on the Mid-Atlantic Ridge (MAR, 36 degrees 13'N), increased our knowledge regarding the diversity of vent communities at slow spreading ridges. Bivalve molluscs of the family Vesicomyidae were represented by the genus Phreagena. Here we present the first record of this genus in the Atlantic Ocean. This second vesicomyid species known from the MAR, Phreagena sp., was found to be associated with a Thyasira species that is affiliated with T. southwardae (at the Logatchev vent field on the MAR) and with T. vulcolutre (in the Gulf of Cadiz). These two clams have close relationships with seep taxa along the continental margin, and were likely associated with sedimented vent fields. delta O-18 and delta C-13 analyses of the shells suggested that the burrowing bivalve Thyasira could incorporate isotopically light carbon, derived from the oxidation of methane in the sediment, while the signature of Phreagena sp. shells denoted a different carbonate source. C-14 dating of the shells denoted that the hydrothermal activity in the Rainbow area began at least similar to 25.5 kyr BP, which is similar to the model of the hydrothermal vent field distribution that was proposed for the Logatchev hydrothermal site. The results provide new insight regarding the diversity of chemosynthetic fauna on the MAR over geologic time. Ultramafic-hosted, on-axis sedimented vent fields extend the range of habitats for chemosynthetic communities, underlying the need to further explore the geology of these types of environments on slow-spreading ridges and to determine their role in the ecology of deep-sea vent communities.
ISSN: 1525-2027

hal-00523467
https://hal.archives-ouvertes.fr/hal-00523467
https://hal.archives-ouvertes.fr/hal-00523467/document
https://hal.archives-ouvertes.fr/hal-00523467/file/G3-Lartaud-_-al.pdf
DOI : 10.1029/2010GC003079

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Detrital zircons in metasedimentary rocks attributed to three different complexes in the Central and Pernambuco-Alagoas domains of the Borborema Province, northeastern Brazil, were dated by LA-ICP-MS. Two samples from each of the following complexes were analyzed: Sertania and Surubim, in the Central Domain, and Rio Una, in the Pernambuco-Alagoas Domain. One sample of the Sertania Complex yielded only Paleoproterozoic zircons, whereas Neoproterozoic zircons predominate in the other, with the youngest zircon indicating deposition after 642 Ma. One of the samples of the Surubim Complex yielded, again, only Paleoproterozoic concordant zircon ages. In the other sample, although Paleoproterozoic zircons predominate, ages vary from the Mesoarchean to the Neoproterozoic. The age of the youngest zircon in this latter sample indicates deposition after 850 Ma and an overgrowth on an Archean grain yielded an age of 623 +/- 6 Ma (2 sigma), interpreted as the age of peak metamorphism. The two samples of the Rio Una Complex yielded predominantly detrital zircons with ages in the ranges 2.2-2.1 Ga and 1.7-1.6 Ga. In this complex, the youngest detrital zircon suggests deposition after 917 Ma and metamorphic zircons indicate peak metamorphic conditions between 600 Ma and 617 Ma.;The results of this study, together with available data from the literature, allow the following conclusions: (a) The Sertania Complex is a Neoproterozoic sequence, and not Paleoproterozoic, as previously thought; (b) The similarity in lithological associations, detrital zircon populations and C isotope signature between the Sertania and Surubim complexes suggest that they belong to the same lithostratigraphic unit; (c) Although the Rio Una Complex can be older than the Sertania/Surubim Complex, the lack of zircons younger than 900 Ma can also result from insufficient sampling or absence of young rocks alongside the drainage system that collected detritus to this complex: (d) The regional metamorphism related to the Brasiliano Orogeny attained its climax at 630-600 Ma; (e) The age spectra of detrital zircons require their derivation from erosion of rocks formed not only during known geological events in the Borborema Province and in the nearby Sao Francisco/Congo Craton, but also from the Amazonian Craton, suggesting accumulation in an intracratonic setting within a preexisting large continent: (f) The short timespan between deposition and orogenic deformation may explain the overall medium- to high-temperature metamorphism due to maintenance, in the subsequent compressional event, of the elevated geothermal gradients produced during broad-scale lithosphere extension.
ISSN: 0301-9268

hal-00443856
https://hal.archives-ouvertes.fr/hal-00443856
DOI : 10.1016/j.precamres.2009.09.009

Éditeur(s) : HAL CCSD
Résumé : 1 p.
International audience
The 12th May 2008 Wenchuan earthquake in the Longmen Shan occurred on a large thrust fault largely inherited from an Indosinian structure itself probably controlled by an older structural heritage of the South China block continental margin. Within the whole northeast Tibet region, such a structural inheritance has had a major impact on the Tertiary deformation. It appears of primary importance to assess the pre-Tertiary tectonic evolution of the main blocks involved to understand the actual deformation in the eastern edge of Tibet. Over the past decades, the Proterozoic to Cenozoic tectonic, metamorphic and geochronologic history of the Longmen Shan and Songpan Garzê area have been largely studied. We present a synthesis of the tectonic evolution of the Songpan Garzê fold and thrust belt from Triassic to present. The Songpan-Garzê belt was formed during closure of a wide oceanic basin ?lled with a thick (5 to 15 km) sequence of Triassic ?yschoid sediments. Closure of the basin due to Triassic subduction involved strong shortening, intense folding and faulting of the Triassic series. A large-scale décollement, that presently outcrops along the eastern boundary of the belt (Danba area), allowed the growth of a wide and thick accretionary wedge. It develops in the Paleozoic and Triassic series and separates the accretionary prism from an autochthonous crystalline basement which shares many similarities with the basement of the Yangtze Craton (0.7-0.9 Ga). To the north and northwest, below the thickened Triassic series of the belt, the composition (oceanic or continental) of the basement remains unknown. During the Indosinian orogeny the emplacement of orogenic granites (220 - 150 Ma) was associated to crustal thickening. The isotopic composition of granitoids shows that their magma source were predominantly derived from melting of the proterozoic basement with varying degrees of sedimentary material and negligible mantle source contribution. In the Danba area, the décollement outcrops in a large tertiary antiform with a NNW-SSE axis. It has been exhumed too in the hanging wall of the NE-SW faults of the Tertiary Longmen-Shan belt that marks the present day transition from the Tibetan plateau to the Sichuan basin. These faults have episodically absorbed signi?cant shortening since the Late Triassic. The amount and precise timing of post-triassic deformation are dif?cult to constrain especially because of the dif?culty to isolate the tertiary thermochronological signal from the protracted late Triassic - Cretaceous thermal history. Nonetheless it is generally accepted that Jurassic - Cretaceous tectonism did not modi?ed the general Triassic architecture of eastern Tibet contrarily to the Tertiary deformation. The long-term cooling histories obtained on Mesozoic granites and on the metamorphic series of the Danba dome are very similar showing a very slow and regular cooling during Jurassic andCretaceous, con?rming the absence of major tectonic event between c.a. 150 and 30 Ma. Low temperature thermochronology data indicate that ?nal exhumation and cooling occurred in theTertiary with an acceleration between 10 and 5 Ma along the major tectonic structures. Within the Longmen Shan range, a total denudation of 7 to 10 km is estimated for the late Cenozoic period. Similar amounts of late Tertiary denudation have been estimated along an east-west section across the Xianshuihe fault
Asian climate and tectonics seminar
Utrecht, Netherlands

insu-00610298
https://hal-insu.archives-ouvertes.fr/insu-00610298
DOI : 10.1016/j.jseaes.2010.03.008

Éditeur(s) : HAL CCSD Springer
Résumé : The analysis of three different regions of the South- Pyrenean fold-and-thrust belt reveals that during the Tertiary compression the hydrological system was compartmentalised in time and space. During the early-middle Eocene, when the thrust front affected marine soft-sediments in the Ainsa basin, the thrust fault zones were dominated by formation fluids derived from Eocene marine waters trapped in the underlying Eocene marls, although influences of meteoric waters were also present. During the middle-late Eocene, when the thrust front emplaced marine rocks over continental redbeds in the eastern Catalan basin (L'Escala thrust), the thrust fault zones were dominated by meteoric fluids. These fluids flowed preferentially along these faults, draining laterally the meteoric fluids and acting as barriers hindering their flowing towards more external parts of the belt. During the Oligocene, the most external part of the fold-and-thrust belt in the eastern Catalan basin developed on top of a salt detachment horizon. The thrust front affected continental materials of late Eocene-Oligocene age. At this moment, the thrusts were conduits for meteoric fluids arriving from the surface and also for evolved meteoric fluids migrating over short distance upwards after being in contact with the underlying evaporitic beds. Most of the fractures show a similar sequence of microfractures. Microfractures of stage 1 formed when the sediment was poorly lithified. Microfractures of stage 2 represent the main episode of vein formation which developed when a progressive induration of the host sediment occurred. During microfracture stage 3, formed in an extensional regime, the host sediment was more indurated. The repetition of this sequence of microfractures in different fracture generations of the same outcrop indicates that the sediment induration was restricted to the vicinity of the vein. Away from the veins, the sediment remained poorly lithified during the entire deformation cycle. Calcite cement within the host rock precipitated later than the syn-compressive veins, when the sediment was more indurated. Elemental geochemistry and stable isotopes of the calcite veins indicates that early generation of microfractures is infilled by local fluids (either marine or meteoric), whereas external fluids (meteoric or evolved meteoric) infilled the main compressive stage of microfractures. The hot temperature of these fluids (157°C to 183°C in the Atiart-Arro example) indicates their circulation through deep parts of the thrust belt. The progressive increase of the 87Sr/86Sr ratio through time is due to the progressive uplift, exposure and erosion of the internal Pyrenean Axial Zone.
Thrust belts and foreland basins, from fold kinematics to hydrocarbon systems

hal-00408001
https://hal.archives-ouvertes.fr/hal-00408001
DOI : 10.1007/978-3-540-69426-7_5

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Field and petrostructural investigations in the Central Mauritanides provide new precisions on the polyorogenic character of the nappe edifice of this belt. The upper structural unit exposed in the Gaoua area includes anatectic gneisses and high-grade metasediments affected by medium temperature, high-pressure metamorphism and cut by granitoids. They represent a basement unconformably overlain by a monometamorphic cover, the Gaoua Group, of assumed lower Paleozoic age. Late Paleozoic regional metamorphism of metapelites from this cover is characterized by pyrophyllite-kyanite-chloritoid assemblages equilibrated at T around 420 degrees C and P = 1 GPa. In the lower structural unit exposed in the south around Boufkerine-Farkaka, metapelites of the Gadel Group display slightly retrogressed garnet-kyanite-staurolite-rutile assemblages that equilibrated at T around 600 degrees C and P >= 1.2 GPa before the intrusion of 639 Ma old plutons. The Gadel Group locally overlies in unconformity polycyclic gneisses. This continental assemblage represents an outboard terrane inserted between two monocyclic greenschist facies terranes: remnants of oceanic lithosphere in the east and arc-derived metasediments and metavolcanics cut by 670 Ma old calc-alkaline plutons in the west. All units have been involved in late Paleozoic nappes emplaced to the east above the West African craton and its late Neoproterozoic to Cambro-ordovician cover. Though an east-directed vergence is locally recorded in the Neoproterozoic units, most early E-W trending stretching and mineral lineations are synchronous with greenschist facies metamorphism developed during the Late Paleozoic and roughly coeval with the Applachian nappe system.
ISSN: 0899-5362

hal-00424501
https://hal.archives-ouvertes.fr/hal-00424501
DOI : 10.1016/j.jafrearsci.2008.09.004

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The anisotropic single crystal seismic properties are reviewed in the light of recent experimental and theoretical determinations. Although considerable progress has been made on the determination of single crystal properties, data are still lacking, particularly for the temperature derivatives of transition zone and lower mantle phases. The common types of LPO of olivine, opx and cpx are presented together with their associated seismic properties. It is emphasized that simple seismic symmetry pattern of upper mantle rocks are a direct result of the interaction of olivine, opx and cpx. Using the standard structural frame (X lineation, Z pole to foliation) for typical LPOs of olivine, opx and cpx have the maximum Vp parallel to X, in the XZ plane and parallel to Y respectively. Destructive interference occurs between these minerals and hence P-wave anisotropy should be sensitive to the aggregate composition. For shear wave splitting (dVs) typical olivine and opx LPOs result in similar patterns with the maximum dVs in the YZ plane and the fast split shear wave (Vs1) polarized parallel to the foliation. A typical cpx LPO on the other hand produces destructive interference as the max dVs is close to X. By comparison with experiments and numerical simulations, it is estimated that upper mantle samples have an olivine LPO strength which recorded shear strain gamma of between 0.25 and 2.0. Pyrolite and piclogite models are compared with global transverse isotropic models. The slowly reducing P-wave anisotropy in the first 200 km can be explained by a model with constant composition and LPO strength. The sharp decrease in the observed anisotropy in the global models cannot be explained by the transformation of opx to cpx at 300 km, it is proposed that this decrease is due to a reduction in LPO strength from 200 to 350 km at the base of the lithosphere.
Earth's Deep Interior: Mineral Physics and Tomography From the Atomic Scale to the Global Scale

ISBN : 9780875909752
hal-01391524
http://hal.univ-reunion.fr/hal-01391524
http://hal.univ-reunion.fr/hal-01391524/document
http://hal.univ-reunion.fr/hal-01391524/file/Mainprice_AGUmonog_DM_GB_WBI_2000.pdf