Éditeur(s) : Elsevier Science Bv
Résumé : The modern Rhone delta in the Gulf of Lions (NW Mediterranean) is a typical wave-dominated delta that developed after the stabilization of relative sea level following the last deglacial sea-level rise. Similar to most other deltas worldwide, it displays several stacked parasequences and lobes that reflect the complex interaction between accommodation, sediment supply and autogenic processes on the architecture of a wave-dominated delta. The interpretation of a large set of newly acquired very high-resolution seismic and sedimentological data, well constrained by 14C dates, provides a refined three-dimensional image of the detailed architecture (seismic bounding surfaces, sedimentary facies) of the Rhone subaqueous delta, and allows us to propose a scenario for delta evolution during the last deglaciation and Holocene. The subaqueous delta consists of “parasequence-like” depositional wedges, a few meters to 20–30 m in thickness. These wedges first back-stepped inland toward the NW in response to combined global sea-level rise and overall westward oceanic circulation, at a time when sediment supply could not keep pace with rapid absolute (eustatic) sea-level rise. At the the Younger Dryas-Preboreal transition, more rapid sea-level rise led to the formation of a major flooding surface (equivalent to a wave ravinement surface). After stabilization of global sea level in the mid-Holocene, accommodation became the leading factor controlling delta architecture. An eastward shift of depocenters occurred, probably favoured by higher subsidence rate within the thick Messinian Rhone valley fill. The transition between transgressive (backstepping geometry) and regressive (prograding geometry) (para)sequences resulted in creation of a Maximum Flooding Surface (MFS) that differs from a “classical” MFS described in the literature. It consists of a coarse-grained interval incorporating reworked shoreface material within a silty clay matrix. This distinct lithofacies results from condensation/erosion, which appears as an important process even within supply-dominated deltaic systems, due to avulsion of distributaries. The age of the MFS varies along-strike between ca. 7.8-5.6 kyr cal. BP in relation to the position of depocenters and climatically-controlled sediment supply. The last rapid climate change of the Holocene, the Little Ice Age (1250–1850 AD), had a distinct stratigraphic influence on the architecture and lithofacies of the Rhone subaqueous delta through the progradation of two deltaic lobes. In response to changes in sediment supply linked to rapid climate changes (and to anthropic factors), the Rhone delta evolved from wave-dominated to fluvial dominated, and then wave dominated again.
Sedimentary Geology (0037-0738) (Elsevier Science Bv), 2014-05 , Vol. 305 , P. 35-53

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00179/29017/27445.pdf
DOI:10.1016/j.sedgeo.2014.02.004
http://archimer.ifremer.fr/doc/00179/29017/

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Purpose: Marine mangrove sediments in the Manche-à-Eau lagoon (Guadeloupe, Caribbean Sea) harbor locally extensive, white microbial mats. These mats cover the surface of reduced sediments near the roots of red mangrove trees, Rhizophora mangle, and are mainly composed of sulfur-oxidizing bacteria belonging to the Beggiatoaceae family, with some filamentous cyanobacteria. The goal of this study was to investigatethe possible influence of sediment characteristics on the presence of these microbial mats. Materials and methods: Four push cores were collected in April 2013, two from zones with microbial mats and two from zones without mats. Sediment characteristics (grain-size distribution, mineralogy, total organic carbon (TOC) and total nitrogen (TN) contents, atomic TOC/TN ratios, and organic matter (OM) δ13C values) were compared for all four cores.Results and discussion: Significant differences were observed between sediments below microbial mats and those without mats. Sediments with microbial mats contained greater amounts of clay, and higher TOC, TN, and TOC/TN ratios, with lower total carbonate content andδ13C values. The higher clay content most likely results from lower fluid flow velocity near to mangrove roots, while higher TOC/TN ratiosand lower δ13C values indicate higher inputs of OM from mangrove trees. These results are consistent with the fact that microbial mats were observed near the roots of mangrove trees, which trap OM from terrestrial vegetation and fine sediments.Conclusions: The grain-size distribution of sediment particles, the total carbonate content, and the δ13C values are the main parameters discriminating between zones with microbial mats and those without mats. Variations in total carbonate content, which is mainly of biogenic origin, result from conditions that are more favorable for benthic organisms in zones without microbial mats. Variations of the TOC/TN ratios are controlled by the presence of a non-negligible amount of inorganic nitrogen bound to surface clay mineral particles and/or by microbial processes.
ISSN: 1439-0108

hal-01682110
https://hal.univ-antilles.fr/hal-01682110
DOI : 10.1007/s11368-016-1555-6

Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : The south-west lagoon of New Caledonia is a wide semi-open coral reef lagoon bounded by an intertidal barrier reef and bisected by numerous deep inlets. This paper synthesizes findings from the 2000-2008 French National Program EC2CO-PNEC relative to the circulation and the transport of suspended particles in this lagoon. Numerical model development (hydrodynamic, fine suspended sediment transport, wind-wave, small-scale atmospheric circulation) allowed the determination of circulation patterns in the lagoon and the charting of residence time, the later of which has been recently used in a series of ecological studies. Topical studies based on field measurements permitted the parameterisation of wave set-up induced by the swell breaking on the reef barrier and the validation of a wind-wave model in a fetch-limited environment. The analysis of spatial and temporal variability of suspended matter concentration over short and long time-scales, the measurement of grain size distribution and the density of suspended matter (1.27 kg 1(-1)), and the estimation of erodibility of heterogeneous (sand/mud, terrigenous/biogenic) soft bottoms was also conducted. Aggregates were shown to be more abundant near or around reefs and a possible biological influence on this aggregation is discussed. Optical measurements enabled the quantification of suspended matter either in situ (monochromatic measurements) or remotely (surface spectral measurements and satellite observations) and provided indirect calibration and validation of a suspended sediment transport model. The processes that warrant further investigation in order to improve our knowledge of circulation and suspended sediment transport in the New Caledonia lagoon as well as in other coral reef areas are discussed, as are the relevance and reliability of the numerical models for this endeavour.
Marine Pollution Bulletin (0025-326X) (Pergamon-elsevier Science Ltd), 2010 , Vol. 61 , N. 7-12 , P. 269-296

Droits : 2010 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/00014/12526/9401.pdf
DOI:10.1016/j.marpolbul.2010.06.023
http://archimer.ifremer.fr/doc/00014/12526/

Éditeur(s) : HAL CCSD
Résumé : High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. Their complete exhumation is the result of processes acting during (syn-orogenic) and after (post-orogenic) subduction is active, the latter partly obliterating the first. In the Aegean domain, the Attic-Cycladic Blueschist unit (ACBU) is a HP-LT unit exhumed in metamorphic core complexes (MCCs) in the back-arc domain of the Hellenic subduction zone. This study is an attempt to distinguish features related to syn-orogenic exhumation processes responsible for the first stages of exhumation This syn-orogenic "message" has to be read through the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation has to be determined. We investigate these features with coupled field, metamorphic petrology and radiochronology studies First, based on observations on Ios (southern Cyclades), it has recently been proposed that syn-orogenic exhumation of the ACBU was accommodated by a basal thrust over the Cycladic Basement (CB) [Huet, et al., 2009]. The peak conditions, deduced from pseudosections calculation for the Ios main lithologies, are 500 °C-19 kbar for the ACBU and 550 °C-16 kbar for the CB. Exhumation until 400 °C-8 kbar is considered as syn-orogenic. Second, phengites populations, single grains and in situ 40Ar-39Ar geochronology has been carried out on samples from Tinos and Andros (northern Cyclades), Syros (central Cyclades) and Ios. The results gather in several clusters: 50-55 Ma, 40-45 Ma, 30-35 Ma, and 22-26 Ma. Based on these new P-T-t data and a synthesis of published data, we are able to refine the geometry and the timing of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in ages and P-T conditions for the successive stages of exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma from Tinos to Ios. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a thrust at their bottom and a detachment at their top. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. Finally, we propose a model for the exhumation of HP-LT units accounting for these data. We also consider the rheological implications of the syn-orogenic structuration of the Aegean wedge on the post-orogenic evolution. B. Huet, L. Labrousse, and L. Jolivet [2009] Thrust or detachment? Exhumation processes in the Aegean: Insight from a field study on Ios (Cyclades, Greece), Tectonics, 28, 3, doi:10.1029/2008TC002397.
EGU General Assembly
Vienne, Austria

insu-00839054
https://hal-insu.archives-ouvertes.fr/insu-00839054
BIBCODE : 2010EGUGA..1214098H

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Melt generation in the continental crust is thought to significantly influence seismic bulk velocities and anisotropy, although existing laboratory data provide limited constraints on such seismic attributes. In this study we measured ultrasonic compressional wave speeds (Vp) and anisotropy during sample compaction, mica-breakdown and melt-generation in synthetic, foliated quartz–muscovite aggregates. Measurements were performed at peak conditions of 300 MPa hydrostatic confining pressure and 750 °C, over a six hour time period, for three separate samples where wave propagation directions were aligned at 0°, 45° and 90° with respect to the foliation plane. The experiments are initially marked by sample compaction and rapid reduction in porosity (from 25% to <2 vol%), with a corresponding increase in Vp. During initial stages of the experiment Vp ranges from 4.65 to 5.45 km/s, depending on the direction of the P wave propagation, resulting in up to ∼16% anisotropy, which originates mainly from the preferred orientation of muscovite and possible incipient melt lenses oriented parallel to foliation. As the experiment progresses the bulk Vp decreases gradually and Vp anisotropy drops from ∼16% to ∼2% after five hours into the experiment. The drop in anisotropy is caused by muscovite-breakdown and increasing amount of partial melting of the aggregate. The bulk velocities are considerably lower than predicted for a mixture of muscovite and β-quartz (stable at 300 MPa and 750 °C). Thermodynamic modeling indicates that mica breakdown and production of melt with ∼2 wt% dissolved water in the aggregate can explain the low Vp, even though β-quartz is stable; the modeled Vp is ∼4.75 km/s at 300 MPa and 750 °C. These ultrasonic attributes signify movement of the melt to fill vacant pores and coating grain boundaries, effectively connecting melt films and reducing seismic anisotropy. The results may apply to regions where crustal melting is on-going, in particular regions of elevated temperature that are only weakly deforming, with coupled anomalously low bulk velocities and seismic anisotropy.
ISSN: 0012-821X

hal-01243569
https://hal.archives-ouvertes.fr/hal-01243569
DOI : 10.1016/j.epsl.2015.05.039

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The New Jersey continental shelf extends 150 km off the shoreline. During IODP Expedition 313, siliciclastic deposits of late Eocene to late Pleistocene age were drilled down to 631, 669 and 755 m below seafloor at sites 27A, 28A and 29A respectively in very shallow waters (33.5 to 36 m depth). Pore water salinities display multilayered brackish-salty-brine units 10 to 170 m thick, where low-salinity water is preferentially stored in fine-grained sediments. The sharp boundaries of these buried aquifers are often marked by cemented layers a few centimetres thick. The mineralogy and scanning electron microscope observations of these layers show two phases of cementation by authigenic minerals: (1) the early carbonate cement is frequently associated with pyrite, and (2) the late silicate cement infills the residual porosity. The isotopic compositions of the carbonate cements vary widely: −2.4 < δ¹⁸O ‰ VPDB < +2.8; −15.1 < δ¹³C ‰ VPDB < +15.6. The δ¹⁸O values indicate that the carbonate cements precipitated with pore waters comprising variable mixtures of seawater and ¹⁸O-depleted fresh water originating from submarine groundwater discharge. The δ¹³C values of the carbonate cements are related to organic matter diagenesis, providing ¹³C-depleted dissolved inorganic carbon during bacterial sulphate reduction and anaerobic oxidation of methane, and ¹³C-rich dissolved inorganic carbon during methanogenesis. The diagenetic cementation processes included chemical weathering of reactive silicate minerals by the CO²-rich pore waters issued from organic matter diagenesis that released bicarbonate, cations and dissolved silica, which were further precipitated as carbonate and silicate cements. The estimated range of temperature (18±4 °C) during carbonate precipitation is consistent with carbonate cementation at moderate burial depths; however, silicate cementation occurred later during diagenesis at deeper burial depths.
ISSN: 0276-0460

hal-01559985
https://hal.archives-ouvertes.fr/hal-01559985
DOI : 10.1007/s00367-017-0506-6

Éditeur(s) : HAL CCSD Frontiers Media
Résumé : International audience
We present high resolution observations of microstructure and texture evolution during dynamic recrystallization (DRX) of ice polycrystals deformed in the laboratory at high temperature (≈0.98Tm). Ice possesses a significant viscoplastic anisotropy that induces strong strain heterogeneities, which result in an early occurrence of DRX mechanisms. It is therefore a model material to explore these mechanisms. High resolution c-axis measurements at sample scale by optical techniques and full crystallographic orientation measurements by cryo-Electron Back Scattering Diffraction (EBSD) provide a solid database for analyzing the relative impact of the macroscopic imposed stress vs. the local and internal stress fields on DRX mechanisms. Analysis of misorientation gradients in the EBSD data highlights a heterogeneous dislocation distribution, which is quantified by the Nye tensor estimation. Joint analyses of the dislocation density maps and microstructural observations highlight spatial correlation between high dislocation density sites and the onset of nucleation taking place by grain-boundary bulging, subgrain rotation or by the formation of kink-bands.
ISSN: 2296-6463

hal-01515284
https://hal.univ-lorraine.fr/hal-01515284
DOI : 10.3389/feart.2015.00081

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have integrated the relatively unknown distal domains of the Lower Congo basin, where the main depocenters of the Congo submarine fan are located, with the better-constrained successions on the shelf and upper slope, through the analysis of thousands of km of 2D seismic reflection profiles off-shore the Congo-Angola passive margin. The basin architecture is depicted by two ca. 800-km-long regional cross sections through the northern (Congo) and southern (Angola) margin. A large unit deposited basinward of the Aptian salt limit is likely to be the abyssal-plain equivalent of the upper-Cretaceous carbonate shelf that characterized the first post-rift deposits in West-equatorial African margins. A latest-Turonian shelf-deepening event is recorded in the abyssal plain as a long period (Coniacian-Eocene) of condensed sedimentation and basin starvation. The onset of the giant Tertiary Congo deep-sea fan in early Oligocene following this event reactivates the abyssal plain as the main depocenter of the basin. The time-space partitioning of sedimentation within the deep-sea fan results from the interplay among increasing sediment supply, margin uplift, rise of the Angola salt ridge, and canyon incision throughout the Neogene. Oligocene-early Miocene turbidite sedimentation occurs mainly in NW-SE grabens and ponded inter-diapir basins on the southern margin (Angola). Seaward tilting of the margin and downslope salt withdrawal activates the up-building of the Angola escarpment, which leads to a northward (Congo) shift of the transfer zones during late Miocene. Around the Miocene-Pliocene boundary, the incision of the Congo submarine canyon confines the turbidite flows and drives a general basinward progradation of the submarine fan into the abyssal plain The slope deposition is dominated by fine-grained hemipelagic deposits ever since. Results from this work contribute to better understand the signature in the ultra-deep deposits of processes acting on the continental margin as well as the basin-wide sediment redistribution in areas of high river input.
ISSN: 0040-1951

hal-00424533
https://hal.archives-ouvertes.fr/hal-00424533
DOI : 10.1016/j.tecto.2008.04.009

Éditeur(s) : American Geophysical Union
Résumé : Thick forced regressive units on the wide continental shelf of the Gulf of Lions (western Mediterranean) recorded the composite effect of sea level changes during the Quaternary. They are mostly composed of coastal siliciclastic and bioclastic wedges showing clinoform geometry. These deposits have been intensively explored through high-resolution seismic investigations, but only recently it was possible to ground truth seismic interpretations, based on a long (100 m) borehole that crossed the succession and recovered a large part of the mainly sandy deposits (similar to 84% recovery). A multiproxy analysis of the sedimentary succession shows that (1) the stratal architecture of the shelf margin is defined by major bounding surfaces that are polygenic erosion surfaces associated with coarse-grained material incorporating abundant and diverse shells, including cold-water fauna (presently absent from the Mediterranean Sea). Between each surface, coarsening upward units with steep (up to 5 degrees) foresets are made of massive (more than 20 m thick) sands with possible swaley and hummocky cross-stratification, passing seaward to sands with muddy intervals and, further offshore, alternating highly boiturbated sands and silts. Each prograding wedge corresponds to a forced-regressive shoreface (or delta front/prodelta), deposited during the overall sea level falls occurring at (relatively slow) interglacial/glacial transition and therefore represents the record of 100 ka cyclicity. Higher-frequency Milankovitch cyclicities are also probably represented by distinct shoreface/delta front wedges; (2) detailed examination of the architecture and chronostratigraphy of the most recent sequence shows that minor bounding surfaces, corresponding to abrupt shallowing of sedimentary facies, separate downward stepping parasequences within the last 100 ka sequence. These events are in phase with millennial-scale glacial climatic and sea level variability, the downward shift surfaces corresponding to the falls during the coldest stadials. These deposits provide a comprehensive and well-constrained Pleistocene analog to the numerous shoreface deposits attributed to falling-stage systems tracts recognized in ancient stratigraphic records, studied at the outcrop scale.
Geochemistry Geophysics Geosystems - G3 (1525-2027) (American Geophysical Union), 2008-11 , Vol. 9 , N. Q11R05 , P. NIL_40-NIL_66

Droits : 2008 American Geophysical Union
http://archimer.ifremer.fr/doc/2008/publication-4929.pdf
DOI:10.1029/2007GC001854
http://archimer.ifremer.fr/doc/00000/4929/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We conducted triaxial compression experiments to investigate the effects of pressure, temperature and strain rate on the rheology of talc rocks. The tests were carried out at T from 25 to 860 degrees C, P from 0.1 to 300 MPa, and <(epsilon) over dot> from 0.3 to 30 x 10-5 s(-1). In addition to being very weak, there are other important differences between the mechanical behavior of talc and that of most other silicates. Deformation at all temperatures up to dehydration was accommodated by a combination of crystal plasticity, frictional sliding, and cataclasis. A transition from localized to distributed deformation occurred at P = 300 MPa and T = 400 degrees C, but this transition is ill-defined as both distributed and localized deformation were observed at P = 300 MPa and T = 600 degrees C. Unlike most silicates, both the coefficient of internal friction and the coefficient of (sliding) friction are very low and nearly equal to each other. Temperature enhances plastic deformation (kinking), and inter- and intra-granular microcracks are observed parallel to the (001) planes at all conditions. Voids are created by delamination along (001) planes at kink-band boundaries. Full crystal plasticity was not achieved under any of the conditions tested, i.e., the von Mises criterion was never satisfied. However, the strength of the aggregates remained much less than the confining pressure. These unusual properties are likely a manifestation of the pronounced mechanical anisotropy of talc at the grain scale. At T >= 750 degrees C dehydration is observed, but only along shear zones. These results suggest that feedbacks between deformation and reaction kinetics could control fluid flow in fault zones. The presence of talc can promote significant weakening and strain localization in the oceanic lithosphere, the subducting plate and the overlying mantle wedge. (c) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00492706
https://hal.archives-ouvertes.fr/hal-00492706
DOI : 10.1016/j.epsl.2008.02.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report concentrations of hydrogen (H) in upper mantle minerals of peridotites (olivine and pyroxenes) transported by alnöitic lavas, which erupted on the southwestern border of the Ontong Java Plateau (Malaita, Solomon Islands, West Pacific). Unpolarized FTIR analyses show that olivine, orthopyroxene, and diopside contain 2–32 ppm, 162–362 ppm and 159–459 ppm wt H2O, respectively. In the studied lherzolites, garnets are anhydrous. The concentration of hydrogen within individual olivine and pyroxene grains is almost homogeneous, indicating no evidence of dehydration or hydration by ionic diffusion. In the lherzolite, the concentration of hydrogen in olivine tends to increase weakly with depth (based on geothermobarometry), consistent with the increase of water solubility with increasing water fugacity as a function of pressure, but concentrations remain well below water-saturation values determined experimentally. The highest concentration of H in olivine (32 ppm wt H2O) is, however, found in refractory spinel harzburgites, which equilibrated at depths of 85 km., while deeper specimens as the high-temperature spinel harzburgites, and some of the garnet lherzolites, contain less hydrogen in olivine. Olivines from pyroxene- or pargasite-rich peridotites have also lower hydrogen concentrations. We interpret the high hydrogen concentrations in olivine from the refractory spinel harzburgites as due to (1) simultaneous hydration and metasomatism of the lithospheric mantle by a water-rich silicate melt/fluid, during which hydrogen follows MREE and where spinel harzburgite have experienced ‘stealth’ metasomatism, and/or (2) to a late ‘fleeting’ hydrogen metasomatism, which would hydrate the rock after this first ‘stealth’ metasomatism event. In the second case, the composition of the ‘fleeting’ percolating fluid (small volume fraction of very evolved fluids, with high volatiles concentration and transient properties) is likely to be linked to the decrease of the plume activity and resulting in the downwelling of the lithosphere asthenosphere boundary. The difference in hydrogen concentration between harzburgites and lherzolites could be linked to variation in trace elements in olivine induced by the first ‘stealth’ metasomatism alone or associated to the late ‘fleeting’ hydrogen metasomatism, triggered by the lack of secondary crystallization of clinopyroxenes in the harzburgite. To conclude, H concentrations in upper mantle minerals may thus be correlated to metasomatic events, with the later yielding variation of the mineral assemblage and trace element composition that constitute the peridotites.
ISSN: 0024-4937

hal-01143385
https://hal.archives-ouvertes.fr/hal-01143385
DOI : 10.1016/j.lithos.2014.11.005

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
This contribution is an attempt to present a self-contained and comprehensive survey of the mathematics and physics of material behavior of rocks in terms of texture and anisotropy. Being generally multi-phase and poly-crystalline, where each single crystallite is anisotropic with respect to its physical properties, texture, i.e., the statistical and spatial distribution of crystallographic orientations becomes a constitutive characteristic and determines the material behavior except for grain boundary effects, i.e., in first order approximation. This chapter is in particular an account of modern mathematical texture analysis, explicitly clarifying terms, providing definitions and justifying their application, and emphasizing its major insights. Thus, mathematical texture analysis is brought back to the realm of spherical Radon and Fourier transforms, spherical approximation, spherical probability, i.e., to themathematics of spherical tomography
Handbook of Geomathematics

hal-00564939
https://hal.archives-ouvertes.fr/hal-00564939

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Abstract View references (35)La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) hollow fibres were prepared by a phase inversion/sintering method using polyetherimide as a binder. In order to overcome surface exchange kinetics limitation, LSCF hollow fibres were coated with ∼200nm palladium (Pd) nanoparticles. The O2 flux of best performing membranes increased by up to 350% in comparison to unmodified LSCF hollow fibres. Optimal enhancement was achieved with a single Pd coating. Additional coatings resulted in reduced O2 fluxes, thus counter acting the beneficial spill-over effect of the catalyst. Long term stability testing in atmospheric air at 850°C showed that a LSCF membrane modified with a single Pd coating continually outperformed a pure LSCF hollow fibre for over 400h, though the level of enhancement was reduced over time. A dramatic reduction in performance of more than 45% occurred within the first 24h of testing, which was attributed to the coalescence and aggregation of Pd catalyst particles to ∼1000nm size at the LSCF grain boundaries. This greatly reduced the available area for the oxygen species to spill-over onto the LSCF surface and thus reduced the overall O2 flux. © 2011 Elsevier B.V.
ISSN: 0376-7388

hal-01683196
https://hal.univ-antilles.fr/hal-01683196
DOI : 10.1016/j.memsci.2011.07.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In order to estimate the seismic anisotropy of subducted crust, polycrystalline samples of KA1Si(3)O(8) K-lingunite (25% of the total subducted transformed sediments), have been synthesized and deformed under the temperature and pressure conditions of the subducted slabs. Transmission electron microscopy (TEM) characterizations of the recovered samples reveal that the microstructures are clearly dominated by [001] glide involving screw dislocations. For this reason, only {100} could be identified as glide planes, the question of [001] slip on {110} remains open. Few 1/2 < 111 > dislocations were observed gliding on {110} planes, which implies that 1/2 < 111 > {110} is a harder slip system than those involving [001] slip. The occurrence of sub-grain boundaries suggests that diffusion and climb might be active under these conditions.;To assess the texture of polycrystalline K-lingunite, the crystal preferred orientations (CP05) were calculated using visco-plastic self-consistent (VPSC) polycrystalline plasticity model in simple shear using the slip systems identified by TEM. Finally, the seismic properties of K-lingunite aggregates were calculated from the CPO and single crystal elasticity tensor. K-lingunite is predicted to have a high seismic anisotropy, which could combine constructively with one of the stishovite (same proportion as K-lingunite at the transition zone depth ranges).
ISSN: 0031-9201

hal-00534050
https://hal.archives-ouvertes.fr/hal-00534050
DOI : 10.1016/j.pepi.2010.06.013